From: Michael Hennerich <[email protected]>
This patch adds support for LTM4686 Ultrathin Dual 10A or
Single 20A uModule Regulator with Digital Power System Management.
Datasheet: http://www.analog.com/ltm4686
Signed-off-by: Michael Hennerich <[email protected]>
---
Documentation/devicetree/bindings/hwmon/ltc2978.txt | 2 ++
Documentation/hwmon/ltc2978 | 5 +++++
drivers/hwmon/pmbus/Kconfig | 3 ++-
drivers/hwmon/pmbus/ltc2978.c | 9 ++++++++-
4 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index bf2a47b..b428a70 100644
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -15,6 +15,7 @@ Required properties:
* "lltc,ltm2987"
* "lltc,ltm4675"
* "lltc,ltm4676"
+ * "lltc,ltm4686"
- reg: I2C slave address
Optional properties:
@@ -30,6 +31,7 @@ Valid names of regulators depend on number of supplies supported per device:
* ltc3880, ltc3882, ltc3886 : vout0 - vout1
* ltc3883 : vout0
* ltm4676 : vout0 - vout1
+ * ltm4686 : vout0 - vout1
Example:
ltc2978@5e {
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 9a49d3c..dfb2caa 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -55,6 +55,10 @@ Supported chips:
Prefix: 'ltm4676'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm4676
+ * Analog Devices LTM4686
+ Prefix: 'ltm4686'
+ Addresses scanned: -
+ Datasheet: http://www.analog.com/ltm4686
Author: Guenter Roeck <[email protected]>
@@ -76,6 +80,7 @@ additional components on a single die. The chip is instantiated and reported
as two separate chips on two different I2C bus addresses.
LTM4675 is a dual 9A or single 18A μModule regulator
LTM4676 is a dual 13A or single 26A uModule regulator.
+LTM4686 is a dual 10A or single 20A uModule regulator.
Usage Notes
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index e71aec6..28279a8 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -83,7 +83,8 @@ config SENSORS_LTC2978_REGULATOR
depends on SENSORS_LTC2978 && REGULATOR
help
If you say yes here you get regulator support for Linear
- Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTM4676
+ and LTM4686.
config SENSORS_LTC3815
tristate "Linear Technologies LTC3815"
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 58b789c..07afb92 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -4,6 +4,7 @@
* Copyright (c) 2011 Ericsson AB.
* Copyright (c) 2013, 2014, 2015 Guenter Roeck
* Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2018 Analog Devices Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +29,7 @@
#include "pmbus.h"
enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
- ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
+ ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676, ltm4686 };
/* Common for all chips */
#define LTC2978_MFR_VOUT_PEAK 0xdd
@@ -81,6 +82,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
#define LTM4676_ID_REV1 0x4400
#define LTM4676_ID_REV2 0x4480
#define LTM4676A_ID 0x47e0
+#define LTM4686_ID 0x4770
#define LTC2974_NUM_PAGES 4
#define LTC2978_NUM_PAGES 8
@@ -512,6 +514,7 @@ static const struct i2c_device_id ltc2978_id[] = {
{"ltm2987", ltm2987},
{"ltm4675", ltm4675},
{"ltm4676", ltm4676},
+ {"ltm4686", ltm4686},
{}
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
@@ -588,6 +591,8 @@ static int ltc2978_get_id(struct i2c_client *client)
else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
chip_id == LTM4676A_ID)
return ltm4676;
+ else if (chip_id == LTM4686_ID)
+ return ltm4686;
dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
return -ENODEV;
@@ -684,6 +689,7 @@ static int ltc2978_probe(struct i2c_client *client,
case ltc3887:
case ltm4675:
case ltm4676:
+ case ltm4686:
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
info->read_word_data = ltc3880_read_word_data;
info->pages = LTC3880_NUM_PAGES;
@@ -770,6 +776,7 @@ static const struct of_device_id ltc2978_of_match[] = {
{ .compatible = "lltc,ltm2987" },
{ .compatible = "lltc,ltm4675" },
{ .compatible = "lltc,ltm4676" },
+ { .compatible = "lltc,ltm4686" },
{ }
};
MODULE_DEVICE_TABLE(of, ltc2978_of_match);
--
2.7.4
On Tue, Aug 14, 2018 at 02:18:28PM +0200, [email protected] wrote:
> From: Michael Hennerich <[email protected]>
>
> This patch adds support for LTM4686 Ultrathin Dual 10A or
> Single 20A uModule Regulator with Digital Power System Management.
>
> Datasheet: http://www.analog.com/ltm4686
>
>
> Signed-off-by: Michael Hennerich <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter