2018-08-23 19:22:30

by Dave Gerlach

[permalink] [raw]
Subject: [PATCH v2] cpufreq: ti-cpufreq: Only register platform_device when supported

Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force
the driver to probe on any platforms where the driver is built in.
However, this should only happen on platforms that actually can make use
of the driver. There is already functionality in place to match the
SoC compatible so let's factor this out into a separate call and
make sure we find a match before creating the ti-cpufreq platform device.

Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Dave Gerlach <[email protected]>
---
v1->v2:
* Return 'match' directly in ti_cpufreq_match_node.
* Add Johan's Reviewed-by.

drivers/cpufreq/ti-cpufreq.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 3f0e2a14895a..6b025953ddee 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -201,19 +201,28 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
{},
};

+static const struct of_device_id *ti_cpufreq_match_node(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+
+ np = of_find_node_by_path("/");
+ match = of_match_node(ti_cpufreq_of_match, np);
+ of_node_put(np);
+
+ return match;
+}
+
static int ti_cpufreq_probe(struct platform_device *pdev)
{
u32 version[VERSION_COUNT];
- struct device_node *np;
const struct of_device_id *match;
struct opp_table *ti_opp_table;
struct ti_cpufreq_data *opp_data;
const char * const reg_names[] = {"vdd", "vbb"};
int ret;

- np = of_find_node_by_path("/");
- match = of_match_node(ti_cpufreq_of_match, np);
- of_node_put(np);
+ match = ti_cpufreq_match_node();
if (!match)
return -ENODEV;

@@ -290,7 +299,10 @@ static int ti_cpufreq_probe(struct platform_device *pdev)

static int ti_cpufreq_init(void)
{
- platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+ /* Check to ensure we are on a compatible platform */
+ if (ti_cpufreq_match_node())
+ platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+
return 0;
}
module_init(ti_cpufreq_init);
--
2.16.1



2018-09-03 06:33:00

by Viresh Kumar

[permalink] [raw]
Subject: Re: [PATCH v2] cpufreq: ti-cpufreq: Only register platform_device when supported

On 23-08-18, 14:20, Dave Gerlach wrote:
> Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force
> the driver to probe on any platforms where the driver is built in.
> However, this should only happen on platforms that actually can make use
> of the driver. There is already functionality in place to match the
> SoC compatible so let's factor this out into a separate call and
> make sure we find a match before creating the ti-cpufreq platform device.
>
> Reviewed-by: Johan Hovold <[email protected]>
> Signed-off-by: Dave Gerlach <[email protected]>
> ---
> v1->v2:
> * Return 'match' directly in ti_cpufreq_match_node.
> * Add Johan's Reviewed-by.
>
> drivers/cpufreq/ti-cpufreq.c | 22 +++++++++++++++++-----
> 1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
> index 3f0e2a14895a..6b025953ddee 100644
> --- a/drivers/cpufreq/ti-cpufreq.c
> +++ b/drivers/cpufreq/ti-cpufreq.c
> @@ -201,19 +201,28 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
> {},
> };
>
> +static const struct of_device_id *ti_cpufreq_match_node(void)
> +{
> + struct device_node *np;
> + const struct of_device_id *match;
> +
> + np = of_find_node_by_path("/");
> + match = of_match_node(ti_cpufreq_of_match, np);
> + of_node_put(np);
> +
> + return match;
> +}
> +
> static int ti_cpufreq_probe(struct platform_device *pdev)
> {
> u32 version[VERSION_COUNT];
> - struct device_node *np;
> const struct of_device_id *match;
> struct opp_table *ti_opp_table;
> struct ti_cpufreq_data *opp_data;
> const char * const reg_names[] = {"vdd", "vbb"};
> int ret;
>
> - np = of_find_node_by_path("/");
> - match = of_match_node(ti_cpufreq_of_match, np);
> - of_node_put(np);
> + match = ti_cpufreq_match_node();
> if (!match)
> return -ENODEV;
>
> @@ -290,7 +299,10 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
>
> static int ti_cpufreq_init(void)
> {
> - platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
> + /* Check to ensure we are on a compatible platform */
> + if (ti_cpufreq_match_node())
> + platform_device_register_simple("ti-cpufreq", -1, NULL, 0);

Maybe call platform_device_register_resndata() here instead and pass match->data
to it and then you wouldn't be required to match again in probe ?

--
viresh