2018-08-28 10:17:29

by Yinbo Zhu

Subject: [PATCH v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node

From: Rajesh Bhagat <[email protected]>

Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required or
not

Signed-off-by: Rajesh Bhagat <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a830a2e..a3c5165 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -610,6 +610,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

usb1: usb3@3000000 {
@@ -623,6 +624,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

usb2: usb3@3100000 {
@@ -636,6 +638,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

sata: sata@3200000 {
--
1.7.1

2018-08-28 10:32:04

by Fabio Estevam

Subject: Re: [PATCH v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node

On Tue, Aug 28, 2018 at 7:12 AM, Yinbo Zhu <[email protected]> wrote:
> From: Rajesh Bhagat <[email protected]>

freescale.com addresses are no longer valid.

The From and the first Signed-off-by lines should match, so use
nxp.com here instead.

> Add "configure-gfladj" boolean property to USB3 node. This property

I don't find any dt-binding doc for this property.

> is used to determine whether frame length adjustent is required or
> not
>
> Signed-off-by: Rajesh Bhagat <[email protected]>
> Signed-off-by: Ran Wang <[email protected]>

You missed to add your Signed-off-by tag.