2018-09-03 10:19:31

by Thierry Reding

[permalink] [raw]
Subject: [PATCH] usb: xhci: tegra: Firmware header is little endian

From: Thierry Reding <[email protected]>

The XUSB firmware header is in little endian byte order, so make the
fields __le32 and __le16 instead of u32 and u16 to avoid warnings from
sparse when the fields are used with the endian-aware __le32_to_cpu()
and __le16_to_cpu() accessors, respectively.

Signed-off-by: Thierry Reding <[email protected]>
---
drivers/usb/host/xhci-tegra.c | 52 +++++++++++++++++------------------
1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 4b463e5202a4..4ee510a51d64 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -107,35 +107,35 @@
#define IMEM_BLOCK_SIZE 256

struct tegra_xusb_fw_header {
- u32 boot_loadaddr_in_imem;
- u32 boot_codedfi_offset;
- u32 boot_codetag;
- u32 boot_codesize;
- u32 phys_memaddr;
- u16 reqphys_memsize;
- u16 alloc_phys_memsize;
- u32 rodata_img_offset;
- u32 rodata_section_start;
- u32 rodata_section_end;
- u32 main_fnaddr;
- u32 fwimg_cksum;
- u32 fwimg_created_time;
- u32 imem_resident_start;
- u32 imem_resident_end;
- u32 idirect_start;
- u32 idirect_end;
- u32 l2_imem_start;
- u32 l2_imem_end;
- u32 version_id;
+ __le32 boot_loadaddr_in_imem;
+ __le32 boot_codedfi_offset;
+ __le32 boot_codetag;
+ __le32 boot_codesize;
+ __le32 phys_memaddr;
+ __le16 reqphys_memsize;
+ __le16 alloc_phys_memsize;
+ __le32 rodata_img_offset;
+ __le32 rodata_section_start;
+ __le32 rodata_section_end;
+ __le32 main_fnaddr;
+ __le32 fwimg_cksum;
+ __le32 fwimg_created_time;
+ __le32 imem_resident_start;
+ __le32 imem_resident_end;
+ __le32 idirect_start;
+ __le32 idirect_end;
+ __le32 l2_imem_start;
+ __le32 l2_imem_end;
+ __le32 version_id;
u8 init_ddirect;
u8 reserved[3];
- u32 phys_addr_log_buffer;
- u32 total_log_entries;
- u32 dequeue_ptr;
- u32 dummy_var[2];
- u32 fwimg_len;
+ __le32 phys_addr_log_buffer;
+ __le32 total_log_entries;
+ __le32 dequeue_ptr;
+ __le32 dummy_var[2];
+ __le32 fwimg_len;
u8 magic[8];
- u32 ss_low_power_entry_timeout;
+ __le32 ss_low_power_entry_timeout;
u8 num_hsic_port;
u8 padding[139]; /* Pad to 256 bytes */
};
--
2.18.0



2018-09-03 12:48:32

by Mathias Nyman

[permalink] [raw]
Subject: Re: [PATCH] usb: xhci: tegra: Firmware header is little endian

On 03.09.2018 13:18, Thierry Reding wrote:
> From: Thierry Reding <[email protected]>
>
> The XUSB firmware header is in little endian byte order, so make the
> fields __le32 and __le16 instead of u32 and u16 to avoid warnings from
> sparse when the fields are used with the endian-aware __le32_to_cpu()
> and __le16_to_cpu() accessors, respectively.
>
> Signed-off-by: Thierry Reding <[email protected]>

Thanks, adding to queue

-Mathias