This series of patches are created On top of the
below series of patches.
https://lkml.org/lkml/2018/8/3/687
Nava kishore Manne (3):
firmware: xilinx: Add fpga API's
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 13 ++
drivers/firmware/xilinx/zynqmp.c | 46 +++++
drivers/fpga/Kconfig | 9 +
drivers/fpga/Makefile | 1 +
drivers/fpga/zynqmp-fpga.c | 159 ++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 4 +
6 files changed, 232 insertions(+)
create mode 100644 drivers/fpga/zynqmp-fpga.c
--
2.18.0
Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <[email protected]>
---
Changes for v2:
-Moved pcap node as a child to firwmare
node as suggested by Rob.
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index 1b431d9bbe44..ef0c3978e6e7 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -16,6 +16,16 @@ Required properties:
Permitted values are:
- "smc" : SMC #0, following the SMCCC
- "hvc" : HVC #0, following the SMCCC
+--------------------------------------------------------------------------
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+--------------------------------------------------------------------------
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
-------
Example
@@ -25,5 +35,8 @@ firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
};
};
--
2.18.0
This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.
Signed-off-by: Nava kishore Manne <[email protected]>
---
Changes for v2:
-New Patch.
drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 4 +++
2 files changed, 50 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7ccedf083926..9b3a59512dd7 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -447,6 +447,50 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
return ret;
}
+/**
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags:
+ * BIT(0) - Bit-stream type.
+ * 0 - Full Bit-stream.
+ * 1 - Partial Bit-stream.
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the xilfpga library to get
+ * the PCAP status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.ioctl = zynqmp_pm_ioctl,
@@ -460,6 +504,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 58a74781b51d..5a6bd5e58ea4 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -34,6 +34,8 @@
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FPGA_LOAD = 22,
+ PM_FPGA_GET_STATUS,
PM_IOCTL = 34,
PM_QUERY_DATA,
PM_CLOCK_ENABLE,
@@ -90,6 +92,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
--
2.18.0
This patch adds FPGA Manager support for the Xilinx
ZynqMp chip.
Signed-off-by: Nava kishore Manne <[email protected]>
---
Changes for v2:
-Updated the Fpga Mgr registrations call's
to 4.18
drivers/fpga/Kconfig | 9 +++
drivers/fpga/Makefile | 1 +
drivers/fpga/zynqmp-fpga.c | 159 +++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/fpga/zynqmp-fpga.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index ee9c5420c47f..ec37e9abd0ad 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -56,6 +56,15 @@ config FPGA_MGR_ZYNQ_FPGA
help
FPGA manager driver support for Xilinx Zynq FPGAs.
+config FPGA_MGR_ZYNQMP_FPGA
+ tristate "Xilinx Zynqmp FPGA"
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ help
+ FPGA manager driver support for Xilinx ZynqMP FPGAs.
+ This driver uses processor configuration port(PCAP)
+ to configure the programmable logic(PL) through PS
+ on ZynqMP SoC.
+
config FPGA_MGR_XILINX_SPI
tristate "Xilinx Configuration over Slave Serial (SPI)"
depends on SPI
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index f9803dad6919..a7cd98d7f721 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o
obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o
obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o
diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
new file mode 100644
index 000000000000..2760d7e3872a
--- /dev/null
+++ b/drivers/fpga/zynqmp-fpga.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Constant Definitions */
+#define IXR_FPGA_DONE_MASK 0X00000008U
+
+/**
+ * struct zynqmp_fpga_priv - Private data structure
+ * @dev: Device data structure
+ * @flags: flags which is used to identify the bitfile type
+ */
+struct zynqmp_fpga_priv {
+ struct device *dev;
+ u32 flags;
+};
+
+static int zynqmp_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t size)
+{
+ struct zynqmp_fpga_priv *priv;
+
+ priv = mgr->priv;
+ priv->flags = info->flags;
+
+ return 0;
+}
+
+static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct zynqmp_fpga_priv *priv;
+ char *kbuf;
+ dma_addr_t dma_addr;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->fpga_load)
+ return -ENXIO;
+
+ priv = mgr->priv;
+
+ kbuf = dma_alloc_coherent(priv->dev, size, &dma_addr, GFP_KERNEL);
+ if (!kbuf)
+ return -ENOMEM;
+
+ memcpy(kbuf, buf, size);
+
+ wmb(); /* ensure all writes are done before initiate FW call */
+
+ ret = eemi_ops->fpga_load(dma_addr, size, priv->flags);
+
+ dma_free_coherent(priv->dev, size, kbuf, dma_addr);
+
+ return ret;
+}
+
+static int zynqmp_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ return 0;
+}
+
+static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
+{
+ u32 status;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->fpga_get_status)
+ return FPGA_MGR_STATE_UNKNOWN;
+
+ eemi_ops->fpga_get_status(&status);
+ if (status & IXR_FPGA_DONE_MASK)
+ return FPGA_MGR_STATE_OPERATING;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops zynqmp_fpga_ops = {
+ .state = zynqmp_fpga_ops_state,
+ .write_init = zynqmp_fpga_ops_write_init,
+ .write = zynqmp_fpga_ops_write,
+ .write_complete = zynqmp_fpga_ops_write_complete,
+};
+
+static int zynqmp_fpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct zynqmp_fpga_priv *priv;
+ struct fpga_manager *mgr;
+ int err, ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
+ if (ret < 0)
+ dev_err(dev, "no usable DMA configuration");
+
+ mgr = fpga_mgr_create(dev, "Xilinx ZynqMP FPGA Manager",
+ &zynqmp_fpga_ops, priv);
+ if (!mgr)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mgr);
+
+ err = fpga_mgr_register(mgr);
+ if (err) {
+ dev_err(dev, "unable to register FPGA manager");
+ fpga_mgr_free(mgr);
+ return err;
+ }
+
+ return 0;
+}
+
+static int zynqmp_fpga_remove(struct platform_device *pdev)
+{
+ struct fpga_manager *mgr = platform_get_drvdata(pdev);
+
+ fpga_mgr_unregister(mgr);
+
+ return 0;
+}
+
+static const struct of_device_id zynqmp_fpga_of_match[] = {
+ { .compatible = "xlnx,zynqmp-pcap-fpga", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, zynqmp_fpga_of_match);
+
+static struct platform_driver zynqmp_fpga_driver = {
+ .probe = zynqmp_fpga_probe,
+ .remove = zynqmp_fpga_remove,
+ .driver = {
+ .name = "zynqmp_fpga_manager",
+ .of_match_table = of_match_ptr(zynqmp_fpga_of_match),
+ },
+};
+
+module_platform_driver(zynqmp_fpga_driver);
+
+MODULE_AUTHOR("Nava kishore Manne <[email protected]>");
+MODULE_DESCRIPTION("Xilinx ZynqMp FPGA Manager");
+MODULE_LICENSE("GPL");
--
2.18.0
On Wed, Sep 05, 2018 at 12:54:47PM +0530, Nava kishore Manne wrote:
> Add documentation to describe Xilinx ZynqMP fpga driver
> bindings.
>
> Signed-off-by: Nava kishore Manne <[email protected]>
> ---
> Changes for v2:
> -Moved pcap node as a child to firwmare
> node as suggested by Rob.
Sorry, but I wasn't thinking that you already have a node defined under
/firmware. There's no reason to have this pcap node as a child of it.
The existing node can instantiate multiple providers including this and
reset provider.
> .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)