Disable IRQs during suspend/resume cycle to ensure handling of wakeup
interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can
be properly handled when I2C bus is finally available. This pattern is
also used in other MAX PMIC MFD drivers.
Signed-off-by: Marek Szyprowski <[email protected]>
---
changelog:
v2:
- reordered the sequence of operation as suggested by Krzysztof Kozlowski
---
drivers/mfd/max8997.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 3f554c447521..b17eff50ad52 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -468,6 +468,7 @@ static int max8997_suspend(struct device *dev)
struct i2c_client *i2c = to_i2c_client(dev);
struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+ disable_irq(max8997->irq);
if (device_may_wakeup(dev))
irq_set_irq_wake(max8997->irq, 1);
return 0;
@@ -480,6 +481,7 @@ static int max8997_resume(struct device *dev)
if (device_may_wakeup(dev))
irq_set_irq_wake(max8997->irq, 0);
+ enable_irq(max8997->irq);
return max8997_irq_resume(max8997);
}
--
2.17.1
On Wed, Sep 05, 2018 at 04:36:06PM +0200, Marek Szyprowski wrote:
> Disable IRQs during suspend/resume cycle to ensure handling of wakeup
> interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can
> be properly handled when I2C bus is finally available. This pattern is
> also used in other MAX PMIC MFD drivers.
>
> Signed-off-by: Marek Szyprowski <[email protected]>
> ---
> changelog:
> v2:
> - reordered the sequence of operation as suggested by Krzysztof Kozlowski
> ---
> drivers/mfd/max8997.c | 2 ++
> 1 file changed, 2 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On Wed, 05 Sep 2018, Marek Szyprowski wrote:
> Disable IRQs during suspend/resume cycle to ensure handling of wakeup
> interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can
> be properly handled when I2C bus is finally available. This pattern is
> also used in other MAX PMIC MFD drivers.
>
> Signed-off-by: Marek Szyprowski <[email protected]>
> ---
> changelog:
> v2:
> - reordered the sequence of operation as suggested by Krzysztof Kozlowski
> ---
> drivers/mfd/max8997.c | 2 ++
> 1 file changed, 2 insertions(+)
Applied, thanks.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog