This is the start of the stable review cycle for the 3.18.122 release.
There are 29 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.122-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.18.122-rc1
Shan Hai <[email protected]>
bcache: release dc->writeback_lock properly in bch_writeback_thread()
Christian Brauner <[email protected]>
getxattr: use correct xattr length
Mikulas Patocka <[email protected]>
udlfb: set optimal write delay
Mikulas Patocka <[email protected]>
fb: fix lost console when the user unplugs a USB adapter
Vignesh R <[email protected]>
pwm: tiehrpwm: Fix disabling of output of PWMs
Richard Weinberger <[email protected]>
ubifs: Fix synced_i_size calculation for xattr inodes
Richard Weinberger <[email protected]>
Revert "UBIFS: Fix potential integer overflow in allocation"
Richard Weinberger <[email protected]>
ubifs: Fix memory leak in lprobs self-check
Jann Horn <[email protected]>
userns: move user access out of the mutex
Eric W. Biederman <[email protected]>
userns; Correct the comment in map_write
Jann Horn <[email protected]>
sys: don't hold uts_sem while accessing userspace memory
Al Viro <[email protected]>
osf_getdomainname(): use copy_to_user()
Peter Zijlstra <[email protected]>
mm/tlb: Remove tlb_remove_table() non-concurrent condition
Jon Hunter <[email protected]>
ARM: tegra: Fix Tegra30 Cardhu PCA954x reset
Dan Carpenter <[email protected]>
pnfs/blocklayout: off by one in bl_map_stripe()
Tomas Bortoli <[email protected]>
9p: fix multiple NULL-pointer-dereferences
Steven Rostedt (VMware) <[email protected]>
uprobes: Use synchronize_rcu() not synchronize_sched()
Snild Dolkow <[email protected]>
kthread, tracing: Don't expose half-written comm when creating kthreads
Steven Rostedt (VMware) <[email protected]>
tracing/blktrace: Fix to allow setting same value
Steven Rostedt (VMware) <[email protected]>
tracing: Do not call start/stop() functions when tracing_on does not change
Lars-Peter Clausen <[email protected]>
iio: ad9523: Fix return value for ad952x_store()
Lars-Peter Clausen <[email protected]>
iio: ad9523: Fix displayed phase
Mike Snitzer <[email protected]>
dm cache metadata: save in-core policy_hint_size to on-disk superblock
Tomas Bortoli <[email protected]>
net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()
Tomas Bortoli <[email protected]>
net/9p/client.c: version pointer uninitialized
jiangyiwen <[email protected]>
9p/virtio: fix off-by-one error in sg list bounds check
Mahesh Salgaonkar <[email protected]>
powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
Hari Bathini <[email protected]>
powerpc/fadump: handle crash memory ranges array index overflow
Bartosz Golaszewski <[email protected]>
spi: davinci: fix a NULL pointer dereference
-------------
Diffstat:
Makefile | 4 +-
arch/alpha/kernel/osf_sys.c | 64 +++++++++++------------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 +
arch/powerpc/include/asm/fadump.h | 3 --
arch/powerpc/kernel/fadump.c | 91 +++++++++++++++++++++++++++------
arch/powerpc/platforms/pseries/ras.c | 2 +-
arch/sparc/kernel/sys_sparc_32.c | 22 ++++----
arch/sparc/kernel/sys_sparc_64.c | 20 +++++---
drivers/iio/frequency/ad9523.c | 4 +-
drivers/md/bcache/writeback.c | 4 +-
drivers/md/dm-cache-metadata.c | 3 +-
drivers/pwm/pwm-tiehrpwm.c | 2 +
drivers/spi/spi-davinci.c | 2 +-
drivers/video/fbdev/core/fbmem.c | 38 +++++++++++---
fs/nfs/blocklayout/dev.c | 2 +-
fs/ubifs/journal.c | 7 ++-
fs/ubifs/lprops.c | 8 +--
fs/xattr.c | 2 +-
include/video/udlfb.h | 2 +-
kernel/kthread.c | 8 ++-
kernel/sys.c | 95 +++++++++++++++++------------------
kernel/trace/blktrace.c | 4 ++
kernel/trace/trace.c | 4 +-
kernel/trace/trace_uprobe.c | 2 +-
kernel/user_namespace.c | 22 ++++----
kernel/utsname_sysctl.c | 41 +++++++++------
mm/memory.c | 9 ----
net/9p/client.c | 2 +-
net/9p/trans_fd.c | 7 ++-
net/9p/trans_rdma.c | 3 ++
net/9p/trans_virtio.c | 6 ++-
31 files changed, 299 insertions(+), 185 deletions(-)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bartosz Golaszewski <[email protected]>
commit 563a53f3906a6b43692498e5b3ae891fac93a4af upstream.
On non-OF systems spi->controlled_data may be NULL. This causes a NULL
pointer derefence on dm365-evm.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-davinci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -230,7 +230,7 @@ static void davinci_spi_chipselect(struc
}
/* program delay transfers if tx_delay is non zero */
- if (spicfg->wdelay)
+ if (spicfg && spicfg->wdelay)
spidat1 |= SPIDAT1_WDEL;
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Snild Dolkow <[email protected]>
commit 3e536e222f2930534c252c1cc7ae799c725c5ff9 upstream.
There is a window for racing when printing directly to task->comm,
allowing other threads to see a non-terminated string. The vsnprintf
function fills the buffer, counts the truncated chars, then finally
writes the \0 at the end.
creator other
vsnprintf:
fill (not terminated)
count the rest trace_sched_waking(p):
... memcpy(comm, p->comm, TASK_COMM_LEN)
write \0
The consequences depend on how 'other' uses the string. In our case,
it was copied into the tracing system's saved cmdlines, a buffer of
adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be):
crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk'
0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12"
...and a strcpy out of there would cause stack corruption:
[224761.522292] Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: ffffff9bf9783c78
crash-arm64> kbt | grep 'comm\|trace_print_context'
#6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396)
comm (char [16]) = "irq/497-pwr_even"
crash-arm64> rd 0xffffffd4d0e17d14 8
ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_
ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16:
ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`..
ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`..........
The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was
likely needed because of this same bug.
Solved by vsnprintf:ing to a local buffer, then using set_task_comm().
This way, there won't be a window where comm is not terminated.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Snild Dolkow <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
[backported to 3.18 / 4.4 by Snild]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/kthread.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -309,10 +309,16 @@ struct task_struct *kthread_create_on_no
task = create->result;
if (!IS_ERR(task)) {
static const struct sched_param param = { .sched_priority = 0 };
+ char name[TASK_COMM_LEN];
va_list args;
va_start(args, namefmt);
- vsnprintf(task->comm, sizeof(task->comm), namefmt, args);
+ /*
+ * task is already visible to other tasks, so updating
+ * COMM must be protected.
+ */
+ vsnprintf(name, sizeof(name), namefmt, args);
+ set_task_comm(task, name);
va_end(args);
/*
* root may have changed our (kthreadd's) priority or CPU mask.
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit f143641bfef9a4a60c57af30de26c63057e7e695 upstream.
Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 2df8f8a6a897e ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6209,7 +6209,9 @@ rb_simple_write(struct file *filp, const
if (buffer) {
mutex_lock(&trace_types_lock);
- if (val) {
+ if (!!val == tracer_tracing_is_on(tr)) {
+ val = 0; /* do nothing */
+ } else if (val) {
tracer_tracing_on(tr);
if (tr->current_trace->start)
tr->current_trace->start(tr);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 0914bb965e38a055e9245637aed117efbe976e91 upstream.
"dev->nr_children" is the number of children which were parsed
successfully in bl_parse_stripe(). It could be all of them and then, in
that case, it is equal to v->stripe.volumes_count. Either way, the >
should be >= so that we don't go beyond the end of what we're supposed
to.
Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: [email protected] # 3.17+
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/blocklayout/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/blocklayout/dev.c
+++ b/fs/nfs/blocklayout/dev.c
@@ -157,7 +157,7 @@ static bool bl_map_stripe(struct pnfs_bl
chunk = div_u64(offset, dev->chunk_size);
div_u64_rem(chunk, dev->nr_children, &chunk_idx);
- if (chunk_idx > dev->nr_children) {
+ if (chunk_idx >= dev->nr_children) {
dprintk("%s: invalid chunk idx %d (%lld/%lld)\n",
__func__, chunk_idx, offset, dev->chunk_size);
/* error, should not happen */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jon Hunter <[email protected]>
commit 6e1811900b6fe6f2b4665dba6bd6ed32c6b98575 upstream.
On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546
I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the
Tegra is not configured as a GPIO but as a special-function IO (SFIO)
that is multiplexing the pin to an I2S controller. On exiting system
suspend, I2C commands sent to the PCA9546 are failing because there is
no ACK. Although it is not possible to see exactly what is happening
to the reset during suspend, by ensuring it is configured as a GPIO
and driven high, to de-assert the reset, the failures are no longer
seen.
Please note that this GPIO is also used to drive the reset signal
going to the camera connector on the board. However, given that there
is no camera support currently for Cardhu, this should not have any
impact.
Fixes: 40431d16ff11 ("ARM: tegra: enable PCA9546 on Cardhu")
Cc: [email protected]
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -200,6 +200,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
};
};
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 016f8ffc48cb01d1e7701649c728c5d2e737d295 upstream.
While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 70ed91c6ec7f8 ("tracing/uprobes: Support ftrace_event_file base multibuffer")
Acked-by: Oleg Nesterov <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_uprobe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -957,7 +957,7 @@ probe_event_disable(struct trace_uprobe
list_del_rcu(&link->list);
/* synchronize with u{,ret}probe_trace_func */
- synchronize_sched();
+ synchronize_rcu();
kfree(link);
if (!list_empty(&tu->tp.files))
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit a6f572084fbee8b30f91465f4a085d7a90901c57 upstream.
Will noted that only checking mm_users is incorrect; we should also
check mm_count in order to cover CPUs that have a lazy reference to
this mm (and could do speculative TLB operations).
If removing this turns out to be a performance issue, we can
re-instate a more complete check, but in tlb_table_flush() eliding the
call_rcu_sched().
Fixes: 267239116987 ("mm, powerpc: move the RCU page-table freeing into generic code")
Reported-by: Will Deacon <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: David Miller <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -359,15 +359,6 @@ void tlb_remove_table(struct mmu_gather
{
struct mmu_table_batch **batch = &tlb->batch;
- /*
- * When there's less then two users of this mm there cannot be a
- * concurrent page-table walk.
- */
- if (atomic_read(&tlb->mm->mm_users) < 2) {
- __tlb_remove_table(table);
- return;
- }
-
if (*batch == NULL) {
*batch = (struct mmu_table_batch *)__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
if (*batch == NULL) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomas Bortoli <[email protected]>
commit 10aa14527f458e9867cf3d2cc6b8cb0f6704448b upstream.
Added checks to prevent GPFs from raising.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Tomas Bortoli <[email protected]>
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/trans_fd.c | 5 ++++-
net/9p/trans_rdma.c | 3 +++
net/9p/trans_virtio.c | 3 +++
3 files changed, 10 insertions(+), 1 deletion(-)
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -934,7 +934,7 @@ p9_fd_create_tcp(struct p9_client *clien
if (err < 0)
return err;
- if (valid_ipaddr4(addr) < 0)
+ if (addr == NULL || valid_ipaddr4(addr) < 0)
return -EINVAL;
csocket = NULL;
@@ -982,6 +982,9 @@ p9_fd_create_unix(struct p9_client *clie
csocket = NULL;
+ if (addr == NULL)
+ return -EINVAL;
+
if (strlen(addr) >= UNIX_PATH_MAX) {
pr_err("%s (%d): address too long: %s\n",
__func__, task_pid_nr(current), addr);
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -623,6 +623,9 @@ rdma_create_trans(struct p9_client *clie
struct ib_qp_init_attr qp_attr;
struct ib_device_attr devattr;
+ if (addr == NULL)
+ return -EINVAL;
+
/* Parse the transport specific mount options */
err = parse_opts(args, &opts);
if (err < 0)
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -617,6 +617,9 @@ p9_virtio_create(struct p9_client *clien
int ret = -ENOENT;
int found = 0;
+ if (devname == NULL)
+ return -EINVAL;
+
mutex_lock(&virtio_9p_lock);
list_for_each_entry(chan, &virtio_chan_list, chan_list) {
if (!strncmp(devname, chan->tag, chan->tag_len) &&
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 9ba3eb5103cf56f0daaf07de4507df76e7813ed7 upstream.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/alpha/kernel/osf_sys.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -560,25 +560,20 @@ SYSCALL_DEFINE0(getdtablesize)
*/
SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
{
- unsigned len;
- int i;
+ int len, err = 0;
+ char *kname;
- if (!access_ok(VERIFY_WRITE, name, namelen))
- return -EFAULT;
-
- len = namelen;
- if (len > 32)
- len = 32;
+ if (namelen > 32)
+ namelen = 32;
down_read(&uts_sem);
- for (i = 0; i < len; ++i) {
- __put_user(utsname()->domainname[i], name + i);
- if (utsname()->domainname[i] == '\0')
- break;
- }
+ kname = utsname()->domainname;
+ len = strnlen(kname, namelen);
+ if (copy_to_user(name, kname, min(len + 1, namelen)))
+ err = -EFAULT;
up_read(&uts_sem);
- return 0;
+ return err;
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn <[email protected]>
commit 5820f140edef111a9ea2ef414ab2428b8cb805b1 upstream.
The old code would hold the userns_state_mutex indefinitely if
memdup_user_nul stalled due to e.g. a userfault region. Prevent that by
moving the memdup_user_nul in front of the mutex_lock().
Note: This changes the error precedence of invalid buf/count/*ppos vs
map already written / capabilities missing.
Fixes: 22d917d80e84 ("userns: Rework the user_namespace adding uid/gid...")
Cc: [email protected]
Signed-off-by: Jann Horn <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/user_namespace.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -602,7 +602,16 @@ static ssize_t map_write(struct file *fi
struct uid_gid_extent *extent = NULL;
unsigned long page = 0;
char *kbuf, *pos, *next_line;
- ssize_t ret = -EINVAL;
+ ssize_t ret;
+
+ /* Only allow < page size writes at the beginning of the file */
+ if ((*ppos != 0) || (count >= PAGE_SIZE))
+ return -EINVAL;
+
+ /* Slurp in the user data */
+ if (copy_from_user(kbuf, buf, count))
+ return -EFAULT;
+ kbuf[count] = '\0';
/*
* The userns_state_mutex serializes all writes to any given map.
@@ -643,17 +652,6 @@ static ssize_t map_write(struct file *fi
if (!page)
goto out;
- /* Only allow < page size writes at the beginning of the file */
- ret = -EINVAL;
- if ((*ppos != 0) || (count >= PAGE_SIZE))
- goto out;
-
- /* Slurp in the user data */
- ret = -EFAULT;
- if (copy_from_user(kbuf, buf, count))
- goto out;
- kbuf[count] = '\0';
-
/* Parse the user data */
ret = -EINVAL;
pos = kbuf;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn <[email protected]>
commit 42a0cc3478584d4d63f68f2f5af021ddbea771fa upstream.
Holding uts_sem as a writer while accessing userspace memory allows a
namespace admin to stall all processes that attempt to take uts_sem.
Instead, move data through stack buffers and don't access userspace memory
while uts_sem is held.
Cc: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/alpha/kernel/osf_sys.c | 51 +++++++++-----------
arch/sparc/kernel/sys_sparc_32.c | 22 +++++----
arch/sparc/kernel/sys_sparc_64.c | 20 ++++----
kernel/sys.c | 95 ++++++++++++++++++---------------------
kernel/utsname_sysctl.c | 41 ++++++++++------
5 files changed, 119 insertions(+), 110 deletions(-)
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -525,24 +525,19 @@ SYSCALL_DEFINE4(osf_mount, unsigned long
SYSCALL_DEFINE1(osf_utsname, char __user *, name)
{
int error;
+ char tmp[5 * 32];
down_read(&uts_sem);
- error = -EFAULT;
- if (copy_to_user(name + 0, utsname()->sysname, 32))
- goto out;
- if (copy_to_user(name + 32, utsname()->nodename, 32))
- goto out;
- if (copy_to_user(name + 64, utsname()->release, 32))
- goto out;
- if (copy_to_user(name + 96, utsname()->version, 32))
- goto out;
- if (copy_to_user(name + 128, utsname()->machine, 32))
- goto out;
+ memcpy(tmp + 0 * 32, utsname()->sysname, 32);
+ memcpy(tmp + 1 * 32, utsname()->nodename, 32);
+ memcpy(tmp + 2 * 32, utsname()->release, 32);
+ memcpy(tmp + 3 * 32, utsname()->version, 32);
+ memcpy(tmp + 4 * 32, utsname()->machine, 32);
+ up_read(&uts_sem);
- error = 0;
- out:
- up_read(&uts_sem);
- return error;
+ if (copy_to_user(name, tmp, sizeof(tmp)))
+ return -EFAULT;
+ return 0;
}
SYSCALL_DEFINE0(getpagesize)
@@ -562,18 +557,21 @@ SYSCALL_DEFINE2(osf_getdomainname, char
{
int len, err = 0;
char *kname;
+ char tmp[32];
- if (namelen > 32)
+ if (namelen < 0 || namelen > 32)
namelen = 32;
down_read(&uts_sem);
kname = utsname()->domainname;
len = strnlen(kname, namelen);
- if (copy_to_user(name, kname, min(len + 1, namelen)))
- err = -EFAULT;
+ len = min(len + 1, namelen);
+ memcpy(tmp, kname, len);
up_read(&uts_sem);
- return err;
+ if (copy_to_user(name, tmp, len))
+ return -EFAULT;
+ return 0;
}
/*
@@ -735,13 +733,14 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
};
unsigned long offset;
const char *res;
- long len, err = -EINVAL;
+ long len;
+ char tmp[__NEW_UTS_LEN + 1];
offset = command-1;
if (offset >= ARRAY_SIZE(sysinfo_table)) {
/* Digital UNIX has a few unpublished interfaces here */
printk("sysinfo(%d)", command);
- goto out;
+ return -EINVAL;
}
down_read(&uts_sem);
@@ -749,13 +748,11 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
len = strlen(res)+1;
if ((unsigned long)len > (unsigned long)count)
len = count;
- if (copy_to_user(buf, res, len))
- err = -EFAULT;
- else
- err = 0;
+ memcpy(tmp, res, len);
up_read(&uts_sem);
- out:
- return err;
+ if (copy_to_user(buf, tmp, len))
+ return -EFAULT;
+ return 0;
}
SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -201,23 +201,27 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig,
asmlinkage long sys_getdomainname(char __user *name, int len)
{
- int nlen, err;
-
+ int nlen, err;
+ char tmp[__NEW_UTS_LEN + 1];
+
if (len < 0)
return -EINVAL;
- down_read(&uts_sem);
-
+ down_read(&uts_sem);
+
nlen = strlen(utsname()->domainname) + 1;
err = -EINVAL;
if (nlen > len)
- goto out;
+ goto out_unlock;
+ memcpy(tmp, utsname()->domainname, nlen);
+
+ up_read(&uts_sem);
- err = -EFAULT;
- if (!copy_to_user(name, utsname()->domainname, nlen))
- err = 0;
+ if (copy_to_user(name, tmp, nlen))
+ return -EFAULT;
+ return 0;
-out:
+out_unlock:
up_read(&uts_sem);
return err;
}
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -524,23 +524,27 @@ extern void check_pending(int signum);
SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
{
- int nlen, err;
+ int nlen, err;
+ char tmp[__NEW_UTS_LEN + 1];
if (len < 0)
return -EINVAL;
- down_read(&uts_sem);
-
+ down_read(&uts_sem);
+
nlen = strlen(utsname()->domainname) + 1;
err = -EINVAL;
if (nlen > len)
- goto out;
+ goto out_unlock;
+ memcpy(tmp, utsname()->domainname, nlen);
+
+ up_read(&uts_sem);
- err = -EFAULT;
- if (!copy_to_user(name, utsname()->domainname, nlen))
- err = 0;
+ if (copy_to_user(name, tmp, nlen))
+ return -EFAULT;
+ return 0;
-out:
+out_unlock:
up_read(&uts_sem);
return err;
}
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1125,18 +1125,19 @@ static int override_release(char __user
SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
- int errno = 0;
+ struct new_utsname tmp;
down_read(&uts_sem);
- if (copy_to_user(name, utsname(), sizeof *name))
- errno = -EFAULT;
+ memcpy(&tmp, utsname(), sizeof(tmp));
up_read(&uts_sem);
+ if (copy_to_user(name, &tmp, sizeof(tmp)))
+ return -EFAULT;
- if (!errno && override_release(name->release, sizeof(name->release)))
- errno = -EFAULT;
- if (!errno && override_architecture(name))
- errno = -EFAULT;
- return errno;
+ if (override_release(name->release, sizeof(name->release)))
+ return -EFAULT;
+ if (override_architecture(name))
+ return -EFAULT;
+ return 0;
}
#ifdef __ARCH_WANT_SYS_OLD_UNAME
@@ -1145,55 +1146,46 @@ SYSCALL_DEFINE1(newuname, struct new_uts
*/
SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
{
- int error = 0;
+ struct old_utsname tmp;
if (!name)
return -EFAULT;
down_read(&uts_sem);
- if (copy_to_user(name, utsname(), sizeof(*name)))
- error = -EFAULT;
+ memcpy(&tmp, utsname(), sizeof(tmp));
up_read(&uts_sem);
+ if (copy_to_user(name, &tmp, sizeof(tmp)))
+ return -EFAULT;
- if (!error && override_release(name->release, sizeof(name->release)))
- error = -EFAULT;
- if (!error && override_architecture(name))
- error = -EFAULT;
- return error;
+ if (override_release(name->release, sizeof(name->release)))
+ return -EFAULT;
+ if (override_architecture(name))
+ return -EFAULT;
+ return 0;
}
SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
{
- int error;
+ struct oldold_utsname tmp = {};
if (!name)
return -EFAULT;
- if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
- return -EFAULT;
down_read(&uts_sem);
- error = __copy_to_user(&name->sysname, &utsname()->sysname,
- __OLD_UTS_LEN);
- error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
- error |= __copy_to_user(&name->nodename, &utsname()->nodename,
- __OLD_UTS_LEN);
- error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
- error |= __copy_to_user(&name->release, &utsname()->release,
- __OLD_UTS_LEN);
- error |= __put_user(0, name->release + __OLD_UTS_LEN);
- error |= __copy_to_user(&name->version, &utsname()->version,
- __OLD_UTS_LEN);
- error |= __put_user(0, name->version + __OLD_UTS_LEN);
- error |= __copy_to_user(&name->machine, &utsname()->machine,
- __OLD_UTS_LEN);
- error |= __put_user(0, name->machine + __OLD_UTS_LEN);
+ memcpy(&tmp.sysname, &utsname()->sysname, __OLD_UTS_LEN);
+ memcpy(&tmp.nodename, &utsname()->nodename, __OLD_UTS_LEN);
+ memcpy(&tmp.release, &utsname()->release, __OLD_UTS_LEN);
+ memcpy(&tmp.version, &utsname()->version, __OLD_UTS_LEN);
+ memcpy(&tmp.machine, &utsname()->machine, __OLD_UTS_LEN);
up_read(&uts_sem);
+ if (copy_to_user(name, &tmp, sizeof(tmp)))
+ return -EFAULT;
- if (!error && override_architecture(name))
- error = -EFAULT;
- if (!error && override_release(name->release, sizeof(name->release)))
- error = -EFAULT;
- return error ? -EFAULT : 0;
+ if (override_architecture(name))
+ return -EFAULT;
+ if (override_release(name->release, sizeof(name->release)))
+ return -EFAULT;
+ return 0;
}
#endif
@@ -1207,17 +1199,18 @@ SYSCALL_DEFINE2(sethostname, char __user
if (len < 0 || len > __NEW_UTS_LEN)
return -EINVAL;
- down_write(&uts_sem);
errno = -EFAULT;
if (!copy_from_user(tmp, name, len)) {
- struct new_utsname *u = utsname();
+ struct new_utsname *u;
+ down_write(&uts_sem);
+ u = utsname();
memcpy(u->nodename, tmp, len);
memset(u->nodename + len, 0, sizeof(u->nodename) - len);
errno = 0;
uts_proc_notify(UTS_PROC_HOSTNAME);
+ up_write(&uts_sem);
}
- up_write(&uts_sem);
return errno;
}
@@ -1225,8 +1218,9 @@ SYSCALL_DEFINE2(sethostname, char __user
SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
{
- int i, errno;
+ int i;
struct new_utsname *u;
+ char tmp[__NEW_UTS_LEN + 1];
if (len < 0)
return -EINVAL;
@@ -1235,11 +1229,11 @@ SYSCALL_DEFINE2(gethostname, char __user
i = 1 + strlen(u->nodename);
if (i > len)
i = len;
- errno = 0;
- if (copy_to_user(name, u->nodename, i))
- errno = -EFAULT;
+ memcpy(tmp, u->nodename, i);
up_read(&uts_sem);
- return errno;
+ if (copy_to_user(name, tmp, i))
+ return -EFAULT;
+ return 0;
}
#endif
@@ -1258,17 +1252,18 @@ SYSCALL_DEFINE2(setdomainname, char __us
if (len < 0 || len > __NEW_UTS_LEN)
return -EINVAL;
- down_write(&uts_sem);
errno = -EFAULT;
if (!copy_from_user(tmp, name, len)) {
- struct new_utsname *u = utsname();
+ struct new_utsname *u;
+ down_write(&uts_sem);
+ u = utsname();
memcpy(u->domainname, tmp, len);
memset(u->domainname + len, 0, sizeof(u->domainname) - len);
errno = 0;
uts_proc_notify(UTS_PROC_DOMAINNAME);
+ up_write(&uts_sem);
}
- up_write(&uts_sem);
return errno;
}
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -17,7 +17,7 @@
#ifdef CONFIG_PROC_SYSCTL
-static void *get_uts(struct ctl_table *table, int write)
+static void *get_uts(struct ctl_table *table)
{
char *which = table->data;
struct uts_namespace *uts_ns;
@@ -25,21 +25,9 @@ static void *get_uts(struct ctl_table *t
uts_ns = current->nsproxy->uts_ns;
which = (which - (char *)&init_uts_ns) + (char *)uts_ns;
- if (!write)
- down_read(&uts_sem);
- else
- down_write(&uts_sem);
return which;
}
-static void put_uts(struct ctl_table *table, int write, void *which)
-{
- if (!write)
- up_read(&uts_sem);
- else
- up_write(&uts_sem);
-}
-
/*
* Special case of dostring for the UTS structure. This has locks
* to observe. Should this be in kernel/sys.c ????
@@ -49,13 +37,34 @@ static int proc_do_uts_string(struct ctl
{
struct ctl_table uts_table;
int r;
+ char tmp_data[__NEW_UTS_LEN + 1];
+
memcpy(&uts_table, table, sizeof(uts_table));
- uts_table.data = get_uts(table, write);
+ uts_table.data = tmp_data;
+
+ /*
+ * Buffer the value in tmp_data so that proc_dostring() can be called
+ * without holding any locks.
+ * We also need to read the original value in the write==1 case to
+ * support partial writes.
+ */
+ down_read(&uts_sem);
+ memcpy(tmp_data, get_uts(table), sizeof(tmp_data));
+ up_read(&uts_sem);
r = proc_dostring(&uts_table, write, buffer, lenp, ppos);
- put_uts(table, write, uts_table.data);
- if (write)
+ if (write) {
+ /*
+ * Write back the new value.
+ * Note that, since we dropped uts_sem, the result can
+ * theoretically be incorrect if there are two parallel writes
+ * at non-zero offsets to the same sysctl.
+ */
+ down_write(&uts_sem);
+ memcpy(get_uts(table), tmp_data, sizeof(tmp_data));
+ up_write(&uts_sem);
proc_sys_poll_notify(table->poll);
+ }
return r;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit 08acbdd6fd736b90f8d725da5a0de4de2dd6de62 upstream.
This reverts commit 353748a359f1821ee934afc579cf04572406b420.
It bypassed the linux-mtd review process and fixes the issue not as it
should.
Cc: Kees Cook <[email protected]>
Cc: Silvio Cesare <[email protected]>
Cc: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/journal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -1101,7 +1101,7 @@ static int recomp_data_node(struct ubifs
int err, len, compr_type, out_len;
out_len = le32_to_cpu(dn->size);
- buf = kmalloc_array(out_len, WORST_COMPR_FACTOR, GFP_NOFS);
+ buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS);
if (!buf)
return -ENOMEM;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vignesh R <[email protected]>
commit 38dabd91ff0bde33352ca3cc65ef515599b77a05 upstream.
pwm-tiehrpwm driver disables PWM output by putting it in low output
state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the
AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC
register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM
output), previous settings are lost as shadow register value is loaded
into active register. This results in things like PWMA getting enabled
automatically, when PWMB is enabled and vice versa. Fix this by
updating AQCSFRC shadow register as well during ehrpwm_pwm_disable().
Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Cc: [email protected]
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pwm/pwm-tiehrpwm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -384,6 +384,8 @@ static void ehrpwm_pwm_disable(struct pw
aqcsfrc_mask = AQCSFRC_CSFA_MASK;
}
+ /* Update shadow register first before modifying active register */
+ ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
/*
* Changes to immediate action on Action Qualifier. This puts
* Action Qualifier control on PWM output from next TBCLK
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit 59965593205fa4044850d35ee3557cf0b7edcd14 upstream.
In ubifs_jnl_update() we sync parent and child inodes to the flash,
in case of xattrs, the parent inode (AKA host inode) has a non-zero
data_len. Therefore we need to adjust synced_i_size too.
This issue was reported by ubifs self tests unter a xattr related work
load.
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4
Cc: <[email protected]>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/journal.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -656,6 +656,11 @@ int ubifs_jnl_update(struct ubifs_info *
spin_lock(&ui->ui_lock);
ui->synced_i_size = ui->ui_size;
spin_unlock(&ui->ui_lock);
+ if (xent) {
+ spin_lock(&host_ui->ui_lock);
+ host_ui->synced_i_size = host_ui->ui_size;
+ spin_unlock(&host_ui->ui_lock);
+ }
mark_inode_clean(c, ui);
mark_inode_clean(c, host_ui);
return 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit bb24153a3f13dd0dbc1f8055ad97fe346d598f66 upstream.
The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.
In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.
This patch changes the delay to this value.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/video/udlfb.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -87,7 +87,7 @@ struct dlfb_data {
#define MIN_RAW_PIX_BYTES 2
#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
-#define DL_DEFIO_WRITE_DELAY 5 /* fb_deferred_io.delay in jiffies */
+#define DL_DEFIO_WRITE_DELAY msecs_to_jiffies(HZ <= 300 ? 4 : 10) /* optimal value for 720p video */
#define DL_DEFIO_WRITE_DISABLE (HZ*60) /* "disable" with long delay */
/* remove these once align.h patch is taken into kernel */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 8c5b044299951acd91e830a688dd920477ea1eda upstream.
I have a USB display adapter using the udlfb driver and I use it on an ARM
board that doesn't have any graphics card. When I plug the adapter in, the
console is properly displayed, however when I unplug and re-plug the
adapter, the console is not displayed and I can't access it until I reboot
the board.
The reason is this:
When the adapter is unplugged, dlfb_usb_disconnect calls
unlink_framebuffer, then it waits until the reference count drops to zero
and then it deallocates the framebuffer. However, the console that is
attached to the framebuffer device keeps the reference count non-zero, so
the framebuffer device is never destroyed. When the USB adapter is plugged
again, it creates a new device /dev/fb1 and the console is not attached to
it.
This patch fixes the bug by unbinding the console from unlink_framebuffer.
The code to unbind the console is moved from do_unregister_framebuffer to
a function unbind_console. When the console is unbound, the reference
count drops to zero and the udlfb driver frees the framebuffer. When the
adapter is plugged back, a new framebuffer is created and the console is
attached to it.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Bernie Thompson <[email protected]>
Cc: Ladislav Michl <[email protected]>
Cc: [email protected]
[b.zolnierkie: preserve old behavior for do_unregister_framebuffer()]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/core/fbmem.c | 38 ++++++++++++++++++++++++++++++++------
1 file changed, 32 insertions(+), 6 deletions(-)
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1687,12 +1687,12 @@ static int do_register_framebuffer(struc
return 0;
}
-static int do_unregister_framebuffer(struct fb_info *fb_info)
+static int unbind_console(struct fb_info *fb_info)
{
struct fb_event event;
- int i, ret = 0;
+ int ret;
+ int i = fb_info->node;
- i = fb_info->node;
if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
return -EINVAL;
@@ -1707,17 +1707,29 @@ static int do_unregister_framebuffer(str
unlock_fb_info(fb_info);
console_unlock();
+ return ret;
+}
+
+static int __unlink_framebuffer(struct fb_info *fb_info);
+
+static int do_unregister_framebuffer(struct fb_info *fb_info)
+{
+ struct fb_event event;
+ int ret;
+
+ ret = unbind_console(fb_info);
+
if (ret)
return -EINVAL;
pm_vt_switch_unregister(fb_info->dev);
- unlink_framebuffer(fb_info);
+ __unlink_framebuffer(fb_info);
if (fb_info->pixmap.addr &&
(fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
kfree(fb_info->pixmap.addr);
fb_destroy_modelist(&fb_info->modelist);
- registered_fb[i] = NULL;
+ registered_fb[fb_info->node] = NULL;
num_registered_fb--;
fb_cleanup_device(fb_info);
event.info = fb_info;
@@ -1730,7 +1742,7 @@ static int do_unregister_framebuffer(str
return 0;
}
-int unlink_framebuffer(struct fb_info *fb_info)
+static int __unlink_framebuffer(struct fb_info *fb_info)
{
int i;
@@ -1742,6 +1754,20 @@ int unlink_framebuffer(struct fb_info *f
device_destroy(fb_class, MKDEV(FB_MAJOR, i));
fb_info->dev = NULL;
}
+
+ return 0;
+}
+
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+ int ret;
+
+ ret = __unlink_framebuffer(fb_info);
+ if (ret)
+ return ret;
+
+ unbind_console(fb_info);
+
return 0;
}
EXPORT_SYMBOL(unlink_framebuffer);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Brauner <[email protected]>
commit 82c9a927bc5df6e06b72d206d24a9d10cced4eb5 upstream.
When running in a container with a user namespace, if you call getxattr
with name = "system.posix_acl_access" and size % 8 != 4, then getxattr
silently skips the user namespace fixup that it normally does resulting in
un-fixed-up data being returned.
This is caused by posix_acl_fix_xattr_to_user() being passed the total
buffer size and not the actual size of the xattr as returned by
vfs_getxattr().
This commit passes the actual length of the xattr as returned by
vfs_getxattr() down.
A reproducer for the issue is:
touch acl_posix
setfacl -m user:0:rwx acl_posix
and the compile:
#define _GNU_SOURCE
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <attr/xattr.h>
/* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */
int main(int argc, void **argv)
{
ssize_t ret1, ret2;
char buf1[128], buf2[132];
int fret = EXIT_SUCCESS;
char *file;
if (argc < 2) {
fprintf(stderr,
"Please specify a file with "
"\"system.posix_acl_access\" permissions set\n");
_exit(EXIT_FAILURE);
}
file = argv[1];
ret1 = getxattr(file, "system.posix_acl_access",
buf1, sizeof(buf1));
if (ret1 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
ret2 = getxattr(file, "system.posix_acl_access",
buf2, sizeof(buf2));
if (ret2 < 0) {
fprintf(stderr, "%s - Failed to retrieve "
"\"system.posix_acl_access\" "
"from \"%s\"\n", strerror(errno), file);
_exit(EXIT_FAILURE);
}
if (ret1 != ret2) {
fprintf(stderr, "The value of \"system.posix_acl_"
"access\" for file \"%s\" changed "
"between two successive calls\n", file);
_exit(EXIT_FAILURE);
}
for (ssize_t i = 0; i < ret2; i++) {
if (buf1[i] == buf2[i])
continue;
fprintf(stderr,
"Unexpected different in byte %zd: "
"%02x != %02x\n", i, buf1[i], buf2[i]);
fret = EXIT_FAILURE;
}
if (fret == EXIT_SUCCESS)
fprintf(stderr, "Test passed\n");
else
fprintf(stderr, "Test failed\n");
_exit(fret);
}
and run:
./tester acl_posix
On a non-fixed up kernel this should return something like:
root@c1:/# ./t
Unexpected different in byte 16: ffffffa0 != 00
Unexpected different in byte 17: ffffff86 != 00
Unexpected different in byte 18: 01 != 00
and on a fixed kernel:
root@c1:~# ./t
Test passed
Cc: [email protected]
Fixes: 2f6f0654ab61 ("userns: Convert vfs posix_acl support to use kuids and kgids")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945
Reported-by: Colin Watson <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -455,7 +455,7 @@ getxattr(struct dentry *d, const char __
if (error > 0) {
if ((strcmp(kname, XATTR_NAME_POSIX_ACL_ACCESS) == 0) ||
(strcmp(kname, XATTR_NAME_POSIX_ACL_DEFAULT) == 0))
- posix_acl_fix_xattr_to_user(kvalue, size);
+ posix_acl_fix_xattr_to_user(kvalue, error);
if (size && copy_to_user(value, kvalue, error))
error = -EFAULT;
} else if (error == -ERANGE && size >= XATTR_SIZE_MAX) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shan Hai <[email protected]>
commit 3943b040f11ed0cc6d4585fd286a623ca8634547 upstream.
The writeback thread would exit with a lock held when the cache device
is detached via sysfs interface, fix it by releasing the held lock
before exiting the while-loop.
Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set)
Signed-off-by: Shan Hai <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Tested-by: Shenghui Wang <[email protected]>
Cc: [email protected] #4.17+
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/writeback.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -462,8 +462,10 @@ static int bch_writeback_thread(void *ar
* data on cache. BCACHE_DEV_DETACHING flag is set in
* bch_cached_dev_detach().
*/
- if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags))
+ if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)) {
+ up_write(&dc->writeback_lock);
break;
+ }
}
up_write(&dc->writeback_lock);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mahesh Salgaonkar <[email protected]>
commit cd813e1cd7122f2c261dce5b54d1e0c97f80e1a5 upstream.
During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.
Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.
Severe Machine check interrupt [Recovered]
NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
Initiator: CPU
Error type: SLB [Multihit]
Effective address: d00000000ca70000
cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
pc: c0000000009694c0: vsnprintf+0x80/0x480
lr: c0000000009698e0: vscnprintf+0x20/0x60
sp: c0000000fc777830
msr: 8000000002009033
dar: a803a30c000000d0
current = 0xc00000000bc9ef00
paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01
pid = 8860, comm = insmod
vscnprintf+0x20/0x60
vprintk_emit+0xb4/0x4b0
vprintk_func+0x5c/0xd0
printk+0x38/0x4c
init_module+0x1c0/0x338 [bork_kernel]
do_one_initcall+0x54/0x230
do_init_module+0x8c/0x248
load_module+0x12b8/0x15b0
sys_finit_module+0xa8/0x110
system_call+0x58/0x6c
--- Exception: c00 (System Call) at 00007fff8bda0644
SP (7fffdfbfe980) is in userspace
This patch fixes this issue.
Fixes: a08a53ea4c97 ("powerpc/le: Enable RTAS events support")
Cc: [email protected] # v3.15+
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Mahesh Salgaonkar <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/pseries/ras.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -298,7 +298,7 @@ static struct rtas_error_log *fwnmi_get_
}
savep = __va(regs->gpr[3]);
- regs->gpr[3] = savep[0]; /* restore original r3 */
+ regs->gpr[3] = be64_to_cpu(savep[0]); /* restore original r3 */
/* If it isn't an extended log we can use the per cpu 64bit buffer */
h = (struct rtas_error_log *)&savep[1];
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: jiangyiwen <[email protected]>
commit 23cba9cbde0bba05d772b335fe5f66aa82b9ad19 upstream.
Because the value of limit is VIRTQUEUE_NUM, if index is equal to
limit, it will cause sg array out of bounds, so correct the judgement
of BUG_ON.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yiwen Jiang <[email protected]>
Reported-By: Dan Carpenter <[email protected]>
Acked-by: Jun Piao <[email protected]>
Cc: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/trans_virtio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -192,7 +192,7 @@ static int pack_sg_list(struct scatterli
s = rest_of_page(data);
if (s > count)
s = count;
- BUG_ON(index > limit);
+ BUG_ON(index >= limit);
/* Make sure we don't terminate early. */
sg_unmark_end(&sg[index]);
sg_set_buf(&sg[index++], data, s);
@@ -238,6 +238,7 @@ pack_sg_list_p(struct scatterlist *sg, i
s = rest_of_page(data);
if (s > count)
s = count;
+ BUG_ON(index >= limit);
/* Make sure we don't terminate early. */
sg_unmark_end(&sg[index]);
sg_set_page(&sg[index++], pdata[i++], s, data_off);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit eef19816ada3abd56d9f20c88794cc2fea83ebb2 upstream.
Allocate the buffer after we return early.
Otherwise memory is being leaked.
Cc: <[email protected]>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/lprops.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -1091,10 +1091,6 @@ static int scan_check_cb(struct ubifs_in
}
}
- buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
- if (!buf)
- return -ENOMEM;
-
/*
* After an unclean unmount, empty and freeable LEBs
* may contain garbage - do not scan them.
@@ -1113,6 +1109,10 @@ static int scan_check_cb(struct ubifs_in
return LPT_SCAN_CONTINUE;
}
+ buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
sleb = ubifs_scan(c, lnum, 0, buf, 0);
if (IS_ERR(sleb)) {
ret = PTR_ERR(sleb);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <[email protected]>
commit 9a5094ca29ea9b1da301b31fd377c0c0c4c23034 upstream.
A sysfs write callback function needs to either return the number of
consumed characters or an error.
The ad952x_store() function currently returns 0 if the input value was "0",
this will signal that no characters have been consumed and the function
will be called repeatedly in a loop indefinitely. Fix this by returning
number of supplied characters to indicate that the whole input string has
been consumed.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/frequency/ad9523.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -507,7 +507,7 @@ static ssize_t ad9523_store(struct devic
return ret;
if (!state)
- return 0;
+ return len;
mutex_lock(&indio_dev->mlock);
switch ((u32)this_attr->address) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomas Bortoli <[email protected]>
commit 430ac66eb4c5b5c4eb846b78ebf65747510b30f1 upstream.
The patch adds the flush in p9_mux_poll_stop() as it the function used by
p9_conn_destroy(), in turn called by p9_fd_close() to stop the async
polling associated with the data regarding the connection.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Tomas Bortoli <[email protected]>
Reported-by: [email protected]
To: Eric Van Hensbergen <[email protected]>
To: Ron Minnich <[email protected]>
To: Latchesar Ionkov <[email protected]>
Cc: Yiwen Jiang <[email protected]>
Cc: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/trans_fd.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -185,6 +185,8 @@ static void p9_mux_poll_stop(struct p9_c
spin_lock_irqsave(&p9_poll_lock, flags);
list_del_init(&m->poll_pending_link);
spin_unlock_irqrestore(&p9_poll_lock, flags);
+
+ flush_work(&p9_poll_work);
}
/**
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit fd2fa95416188a767a63979296fa3e169a9ef5ec upstream.
policy_hint_size starts as 0 during __write_initial_superblock(). It
isn't until the policy is loaded that policy_hint_size is set in-core
(cmd->policy_hint_size). But it never got recorded in the on-disk
superblock because __commit_transaction() didn't deal with transfering
the in-core cmd->policy_hint_size to the on-disk superblock.
The in-core cmd->policy_hint_size gets initialized by metadata_open()'s
__begin_transaction_flags() which re-reads all superblock fields.
Because the superblock's policy_hint_size was never properly stored, when
the cache was created, hints_array_available() would always return false
when re-activating a previously created cache. This means
__load_mappings() always considered the hints invalid and never made use
of the hints (these hints served to optimize).
Another detremental side-effect of this oversight is the cache_check
utility would fail with: "invalid hint width: 0"
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-cache-metadata.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -324,7 +324,7 @@ static int __write_initial_superblock(st
disk_super->version = cpu_to_le32(MAX_CACHE_VERSION);
memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
memset(disk_super->policy_version, 0, sizeof(disk_super->policy_version));
- disk_super->policy_hint_size = 0;
+ disk_super->policy_hint_size = cpu_to_le32(0);
__copy_sm_root(cmd, disk_super);
@@ -635,6 +635,7 @@ static int __commit_transaction(struct d
disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
disk_super->policy_version[1] = cpu_to_le32(cmd->policy_version[1]);
disk_super->policy_version[2] = cpu_to_le32(cmd->policy_version[2]);
+ disk_super->policy_hint_size = cpu_to_le32(cmd->policy_hint_size);
disk_super->read_hits = cpu_to_le32(cmd->stats.read_hits);
disk_super->read_misses = cpu_to_le32(cmd->stats.read_misses);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomas Bortoli <[email protected]>
commit 7913690dcc5e18e235769fd87c34143072f5dbea upstream.
The p9_client_version() does not initialize the version pointer. If the
call to p9pdu_readf() returns an error and version has not been allocated
in p9pdu_readf(), then the program will jump to the "error" label and will
try to free the version pointer. If version is not initialized, free()
will be called with uninitialized, garbage data and will provoke a crash.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Tomas Bortoli <[email protected]>
Reported-by: [email protected]
Reviewed-by: Jun Piao <[email protected]>
Reviewed-by: Yiwen Jiang <[email protected]>
Cc: Eric Van Hensbergen <[email protected]>
Cc: Ron Minnich <[email protected]>
Cc: Latchesar Ionkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -938,7 +938,7 @@ static int p9_client_version(struct p9_c
{
int err = 0;
struct p9_req_t *req;
- char *version;
+ char *version = NULL;
int msize;
p9_debug(P9_DEBUG_9P, ">>> TVERSION msize %d protocol %d\n",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <[email protected]>
commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e upstream.
Fix the displayed phase for the ad9523 driver. Currently the most
significant decimal place is dropped and all other digits are shifted one
to the left. This is due to a multiplication by 10, which is not necessary,
so remove it.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/frequency/ad9523.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -641,7 +641,7 @@ static int ad9523_read_raw(struct iio_de
code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) /
AD9523_CLK_DIST_DIV_REV(ret);
*val = code / 1000000;
- *val2 = (code % 1000000) * 10;
+ *val2 = code % 1000000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 36476beac4f8ca9dc7722790b2e8ef0e8e51034e upstream.
It is important that all maps are less than PAGE_SIZE
or else setting the last byte of the buffer to '0'
could write off the end of the allocated storage.
Correct the misleading comment.
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/user_namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -643,7 +643,7 @@ static ssize_t map_write(struct file *fi
if (!page)
goto out;
- /* Only allow <= page size writes at the beginning of the file */
+ /* Only allow < page size writes at the beginning of the file */
ret = -EINVAL;
if ((*ppos != 0) || (count >= PAGE_SIZE))
goto out;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 757d9140072054528b13bbe291583d9823cde195 upstream.
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/[email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: cd649b8bb830d ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <[email protected]>
Tested-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/blktrace.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1734,6 +1734,10 @@ static ssize_t sysfs_blk_trace_attr_stor
mutex_lock(&bdev->bd_mutex);
if (attr == &dev_attr_enable) {
+ if (!!value == !!q->blk_trace) {
+ ret = 0;
+ goto out_unlock_bdev;
+ }
if (value)
ret = blk_trace_setup_queue(q, bdev);
else
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hari Bathini <[email protected]>
commit 1bd6a1c4b80a28d975287630644e6b47d0f977a5 upstream.
Crash memory ranges is an array of memory ranges of the crashing kernel
to be exported as a dump via /proc/vmcore file. The size of the array
is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases
where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS
value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since
commit 142b45a72e22 ("memblock: Add array resizing support").
On large memory systems with a few DLPAR operations, the memblock memory
regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such
systems, registering fadump results in crash or other system failures
like below:
task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000
NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180
REGS: c00000000b73b570 TRAP: 0300 Tainted: G L X (4.4.140+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22004484 XER: 20000000
CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0
...
NIP [c000000000047df4] smp_send_reschedule+0x24/0x80
LR [c0000000000f9e58] resched_curr+0x138/0x160
Call Trace:
resched_curr+0x138/0x160 (unreliable)
check_preempt_curr+0xc8/0xf0
ttwu_do_wakeup+0x38/0x150
try_to_wake_up+0x224/0x4d0
__wake_up_common+0x94/0x100
ep_poll_callback+0xac/0x1c0
__wake_up_common+0x94/0x100
__wake_up_sync_key+0x70/0xa0
sock_def_readable+0x58/0xa0
unix_stream_sendmsg+0x2dc/0x4c0
sock_sendmsg+0x68/0xa0
___sys_sendmsg+0x2cc/0x2e0
__sys_sendmsg+0x5c/0xc0
SyS_socketcall+0x36c/0x3f0
system_call+0x3c/0x100
as array index overflow is not checked for while setting up crash memory
ranges causing memory corruption. To resolve this issue, dynamically
allocate memory for crash memory ranges and resize it incrementally,
in units of pagesize, on hitting array size limit.
Fixes: 2df173d9e85d ("fadump: Initialize elfcore header and add PT_LOAD program headers.")
Cc: [email protected] # v3.4+
Signed-off-by: Hari Bathini <[email protected]>
Reviewed-by: Mahesh Salgaonkar <[email protected]>
[mpe: Just use PAGE_SIZE directly, fixup variable placement]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/fadump.h | 3 -
arch/powerpc/kernel/fadump.c | 91 ++++++++++++++++++++++++++++++++------
2 files changed, 77 insertions(+), 17 deletions(-)
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -194,9 +194,6 @@ struct fadump_crash_info_header {
struct cpumask cpu_online_mask;
};
-/* Crash memory ranges */
-#define INIT_CRASHMEM_RANGES (INIT_MEMBLOCK_REGIONS + 2)
-
struct fad_crash_memory_ranges {
unsigned long long base;
unsigned long long size;
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -48,8 +48,10 @@ static struct fadump_mem_struct fdm;
static const struct fadump_mem_struct *fdm_active;
static DEFINE_MUTEX(fadump_mutex);
-struct fad_crash_memory_ranges crash_memory_ranges[INIT_CRASHMEM_RANGES];
+struct fad_crash_memory_ranges *crash_memory_ranges;
+int crash_memory_ranges_size;
int crash_mem_ranges;
+int max_crash_mem_ranges;
/* Scan the Firmware Assisted dump configuration details. */
int __init early_init_dt_scan_fw_dump(unsigned long node,
@@ -726,38 +728,88 @@ static int __init process_fadump(const s
return 0;
}
-static inline void fadump_add_crash_memory(unsigned long long base,
- unsigned long long end)
+static void free_crash_memory_ranges(void)
+{
+ kfree(crash_memory_ranges);
+ crash_memory_ranges = NULL;
+ crash_memory_ranges_size = 0;
+ max_crash_mem_ranges = 0;
+}
+
+/*
+ * Allocate or reallocate crash memory ranges array in incremental units
+ * of PAGE_SIZE.
+ */
+static int allocate_crash_memory_ranges(void)
+{
+ struct fad_crash_memory_ranges *new_array;
+ u64 new_size;
+
+ new_size = crash_memory_ranges_size + PAGE_SIZE;
+ pr_debug("Allocating %llu bytes of memory for crash memory ranges\n",
+ new_size);
+
+ new_array = krealloc(crash_memory_ranges, new_size, GFP_KERNEL);
+ if (new_array == NULL) {
+ pr_err("Insufficient memory for setting up crash memory ranges\n");
+ free_crash_memory_ranges();
+ return -ENOMEM;
+ }
+
+ crash_memory_ranges = new_array;
+ crash_memory_ranges_size = new_size;
+ max_crash_mem_ranges = (new_size /
+ sizeof(struct fad_crash_memory_ranges));
+ return 0;
+}
+
+static inline int fadump_add_crash_memory(unsigned long long base,
+ unsigned long long end)
{
if (base == end)
- return;
+ return 0;
+
+ if (crash_mem_ranges == max_crash_mem_ranges) {
+ int ret;
+
+ ret = allocate_crash_memory_ranges();
+ if (ret)
+ return ret;
+ }
pr_debug("crash_memory_range[%d] [%#016llx-%#016llx], %#llx bytes\n",
crash_mem_ranges, base, end - 1, (end - base));
crash_memory_ranges[crash_mem_ranges].base = base;
crash_memory_ranges[crash_mem_ranges].size = end - base;
crash_mem_ranges++;
+ return 0;
}
-static void fadump_exclude_reserved_area(unsigned long long start,
+static int fadump_exclude_reserved_area(unsigned long long start,
unsigned long long end)
{
unsigned long long ra_start, ra_end;
+ int ret = 0;
ra_start = fw_dump.reserve_dump_area_start;
ra_end = ra_start + fw_dump.reserve_dump_area_size;
if ((ra_start < end) && (ra_end > start)) {
if ((start < ra_start) && (end > ra_end)) {
- fadump_add_crash_memory(start, ra_start);
- fadump_add_crash_memory(ra_end, end);
+ ret = fadump_add_crash_memory(start, ra_start);
+ if (ret)
+ return ret;
+
+ ret = fadump_add_crash_memory(ra_end, end);
} else if (start < ra_start) {
- fadump_add_crash_memory(start, ra_start);
+ ret = fadump_add_crash_memory(start, ra_start);
} else if (ra_end < end) {
- fadump_add_crash_memory(ra_end, end);
+ ret = fadump_add_crash_memory(ra_end, end);
}
} else
- fadump_add_crash_memory(start, end);
+ ret = fadump_add_crash_memory(start, end);
+
+ return ret;
}
static int fadump_init_elfcore_header(char *bufp)
@@ -793,10 +845,11 @@ static int fadump_init_elfcore_header(ch
* Traverse through memblock structure and setup crash memory ranges. These
* ranges will be used create PT_LOAD program headers in elfcore header.
*/
-static void fadump_setup_crash_memory_ranges(void)
+static int fadump_setup_crash_memory_ranges(void)
{
struct memblock_region *reg;
unsigned long long start, end;
+ int ret;
pr_debug("Setup crash memory ranges.\n");
crash_mem_ranges = 0;
@@ -807,7 +860,9 @@ static void fadump_setup_crash_memory_ra
* specified during fadump registration. We need to create a separate
* program header for this chunk with the correct offset.
*/
- fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size);
+ ret = fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size);
+ if (ret)
+ return ret;
for_each_memblock(memory, reg) {
start = (unsigned long long)reg->base;
@@ -816,8 +871,12 @@ static void fadump_setup_crash_memory_ra
start = fw_dump.boot_memory_size;
/* add this range excluding the reserved dump area. */
- fadump_exclude_reserved_area(start, end);
+ ret = fadump_exclude_reserved_area(start, end);
+ if (ret)
+ return ret;
}
+
+ return 0;
}
/*
@@ -941,6 +1000,7 @@ static void register_fadump(void)
{
unsigned long addr;
void *vaddr;
+ int ret;
/*
* If no memory is reserved then we can not register for firmware-
@@ -949,7 +1009,9 @@ static void register_fadump(void)
if (!fw_dump.reserve_dump_area_size)
return;
- fadump_setup_crash_memory_ranges();
+ ret = fadump_setup_crash_memory_ranges();
+ if (ret)
+ return ret;
addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
@@ -1028,6 +1090,7 @@ void fadump_cleanup(void)
} else if (fw_dump.dump_registered) {
/* Un-register Firmware-assisted dump if it was registered. */
fadump_unregister_dump(&fdm);
+ free_crash_memory_ranges();
}
}
On Fri, Sep 07, 2018 at 11:10:21PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.122 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.122-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Merged, compiled with -Werror, and installed onto my Pixel XL.
No initial issues noticed in dmesg or general usage.
Thanks!
Nathan
On 8 September 2018 2:40:21 AM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 3.18.122 release.
>There are 29 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.122-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-3.18.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Cleanly merges and builds with Werror in my oneplus3 tree. No immediate regressions noticed. Thanks for the update.
--
Harsh Shandilya, PRJKT Development LLC
On Sat, Sep 08, 2018 at 10:53:22AM +0530, Harsh 'Shandilya wrote:
> On 8 September 2018 2:40:21 AM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 3.18.122 release.
> >There are 29 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.122-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-3.18.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Cleanly merges and builds with Werror in my oneplus3 tree. No
> immediate regressions noticed. Thanks for the update.
Thanks for testing and letting me know.
greg k-h
On 09/07/2018 02:10 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.122 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> Anything received after that time might be too late.
>
Affects at least 3.18, 4.4, 4.9:
Building powerpc:allmodconfig ... failed
--------------
Error log:
arch/powerpc/kernel/fadump.c: In function 'free_crash_memory_ranges':
arch/powerpc/kernel/fadump.c:733:2: error: implicit declaration of function 'kfree'
arch/powerpc/kernel/fadump.c: In function 'allocate_crash_memory_ranges':
arch/powerpc/kernel/fadump.c:752:2: error: implicit declaration of function 'krealloc'
Affects at least 4.9 (on top of the above):
Building powerpc:defconfig ... failed
Building powerpc:allmodconfig ... failed
--------------
arch/powerpc/platforms/powernv/pci-ioda.c: In function 'pnv_pci_enable_bridge':
arch/powerpc/platforms/powernv/pci-ioda.c:3145:4: error: implicit declaration of function 'pci_err'
4.14, 4,18 unknown.
Very preliminary; the builds will take a while to complete. My builders
are struggling with stability problems when running 4.18.6 kernels.
Guenter
On 09/07/2018 02:10 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.122 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 139 pass: 138 fail: 1
Failed builds:
powerpc:allmodconfig
Qemu test results:
total: 217 pass: 217 fail: 0
Details are available at https://kerneltests.org/builders/.
Guenter
On Sat, Sep 08, 2018 at 02:12:54PM -0700, Guenter Roeck wrote:
> On 09/07/2018 02:10 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.122 release.
> > There are 29 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 139 pass: 138 fail: 1
> Failed builds:
> powerpc:allmodconfig
> Qemu test results:
> total: 217 pass: 217 fail: 0
>
> Details are available at https://kerneltests.org/builders/.
Pushed out a -rc2 with this fixed up.
thanks,
greg k-h
On 09/09/2018 02:28 AM, Greg Kroah-Hartman wrote:
> On Sat, Sep 08, 2018 at 02:12:54PM -0700, Guenter Roeck wrote:
>> On 09/07/2018 02:10 PM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 3.18.122 release.
>>> There are 29 patches in this series, all will be posted as a response
>>> to this one. If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
>>> Anything received after that time might be too late.
>>>
>>
>> Build results:
>> total: 139 pass: 138 fail: 1
>> Failed builds:
>> powerpc:allmodconfig
>> Qemu test results:
>> total: 217 pass: 217 fail: 0
>>
>> Details are available at https://kerneltests.org/builders/.
>
> Pushed out a -rc2 with this fixed up.
>
For v3.18.121-30-g60d7419e2ba3:
Build results:
total: 139 pass: 139 fail: 0
Qemu test results:
total: 217 pass: 217 fail: 0
Guenter
On 09/07/2018 03:10 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.122 release.
> There are 29 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Sep 9 21:08:52 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.122-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah