Add device-tree description of the Mitac MIO A701 board.
This is aimed at replacing mioa701.c board file, and once stabilized,
the leftover, such as the suspend resume mechanics will rely on a new
IPL, and not the legacy Windows CE one.
Signed-off-by: Robert Jarzmik <[email protected]>
---
Since v1: fix lcd_supply and lcd_backlight
These were depending on my internal tree changes, fit it.
Since v2: take into account Rob's comments
Since v3: take into account Marcel's comments
This patch deserves some special "love review". As it will probably
serve for a more broad pxa conversion to devicetree of the other boards,
and because it touches almost all domains for a pxa platform (camera,
video, audio, i2c, ...), it should be as clean as possible so that
mistakes are not carried on ...
Therefore I expect the review of this one to be long (ie. it won't land
for v4.19), until it looks good enough.
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/mioa701.dts | 570 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 572 insertions(+)
create mode 100644 arch/arm/boot/dts/mioa701.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..8809f4e2244d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -775,6 +775,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
dtb-$(CONFIG_ARCH_OXNAS) += \
ox810se-wd-mbwe.dtb \
ox820-cloudengines-pogoplug-series-3.dtb
+dtb-$(CONFIG_ARCH_PXA) += \
+ mioa701.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8060-dragonboard.dtb \
qcom-apq8064-arrow-sd-600eval.dtb \
diff --git a/arch/arm/boot/dts/mioa701.dts b/arch/arm/boot/dts/mioa701.dts
new file mode 100644
index 000000000000..9e368361d498
--- /dev/null
+++ b/arch/arm/boot/dts/mioa701.dts
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Robert Jarzmik <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "pxa27x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/clock/pxa-clock.h>
+
+/ {
+ model = "Mitac Mio A701 Board";
+ compatible = "mitac,mioa701", "marvell,pxa270";
+
+ chosen {
+ bootargs = "mtdparts=docg3.0:256k@3456k(barebox)ro,256k(barebox-logo),128k(barebox-env),4M(kernel),-(root) ubi.mtd=4 rootfstype=ubifs root=ubi0:linux_root ro";
+ };
+
+ memory {
+ reg = <0xa0000000 0x04000000>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pstore_region:region@a2000000 {
+ compatible = "linux,contiguous-memory-region";
+ reg = <0xa2000000 0x100000>;
+ };
+ };
+ };
+
+ cpus {
+ cpu {
+ cpu-supply = <&vcc_core>;
+ };
+ };
+
+ pxabus {
+ pinctrl: pinctrl@40e00000 {
+ status = "okay";
+
+ pinctrl_ac97_default: ac97-default {
+ PMMUX(hpjack-detect, 12, gpio_in);
+ PMMUX(ac97-bitclk, 28, AC97_BITCLK);
+ PMMUX(ac97-sdata-in-0, 29, AC97_SDATA_IN_0);
+ PMMUX(ac97-sdata-out, 30, AC97_SDATA_OUT);
+ PMMUX(ac97-sync, 31, AC97_SYNC);
+ PMMUX(ac97-sysclk, 89, AC97_SYSCLK);
+ };
+
+ pinctrl_btuart_default: btuart-default {
+ PMMUX(btuart-nactivity, 14, gpio_in);
+ PMMUX(btuart-rxd, 42, BTRXD);
+ PMMUX(btuart-txd, 43, BTTXD);
+ PMMUX(btuart-cts, 44, BTCTS);
+ PMMUX(btuart-rts, 45, BTRTS);
+ PMMUX_LPM_LOW(bt-on, 83, gpio_out);
+ PMMUX_LPM_HIGH(bt-unknown, 77, gpio_out);
+ PMMUX_LPM_HIGH(bt-nreset, 86, gpio_out);
+ };
+
+ pinctrl_ffuart_default: ffuart-default {
+ PMMUX(ffuart-rxd, 34, FFRXD);
+ PMMUX(ffuart-cts, 35, FFCTS);
+ PMMUX(ffuart-dcd, 36, FFDCD);
+ PMMUX(ffuart-dsr, 37, FFDSR);
+ PMMUX(ffuart-txd, 39, FFTXD);
+ PMMUX(ffuart-dtr, 40, FFDTR);
+ PMMUX(ffuart-rts, 41, FFRTS);
+ PMMUX_LPM_LOW(gsm-reset, 24, gpio_out);
+ PMMUX(gsm-is-on, 25, gpio_in);
+ PMMUX_LPM_HIGH(gsm-nset-on, 88, gpio_out);
+ PMMUX_LPM_HIGH(gsm-nset-off, 90, gpio_out);
+ PMMUX(gsm-event-available, 113, gpio_in);
+ PMMUX_LPM_HIGH(gsm-dte-state, 114, gpio_out);
+ };
+
+ pinctrl_gpiokeys_default: gpiokeys-default {
+ PMMUX(key-power, 0, gpio_in);
+ PMMUX(key-volume_up, 93, gpio_in);
+ PMMUX(key-volume_down, 94, gpio_in);
+ };
+
+ pinctrl_keypad_default: keypad-default {
+ PMMUX(keypad-mkin0, 100, KP_MKIN<0>);
+ PMMUX(keypad-mkin1, 101, KP_MKIN<1>);
+ PMMUX(keypad-mkin2, 102, KP_MKIN<2>);
+ PMMUX(keypad-mkout0, 103, KP_MKOUT<0>);
+ PMMUX(keypad-mkout1, 104, KP_MKOUT<1>);
+ PMMUX(keypad-mkout2, 105, KP_MKOUT<2>);
+ };
+
+ pinctrl_i2c_default: i2c-default {
+ PMMUX(i2c-scl, 117, SCL);
+ PMMUX(i2c-sda, 118, SDA);
+ };
+
+ pinctrl_lcd_default: lcd-default {
+ PMMUX(ldd0, 58, LDD<0>);
+ PMMUX(ldd1, 59, LDD<1>);
+ PMMUX(ldd2, 60, LDD<2>);
+ PMMUX(ldd3, 61, LDD<3>);
+ PMMUX(ldd4, 62, LDD<4>);
+ PMMUX(ldd5, 63, LDD<5>);
+ PMMUX(ldd6, 64, LDD<6>);
+ PMMUX(ldd7, 65, LDD<7>);
+ PMMUX(ldd8, 66, LDD<8>);
+ PMMUX(ldd9, 67, LDD<9>);
+ PMMUX(ldd10, 68, LDD<10>);
+ PMMUX(ldd11, 69, LDD<11>);
+ PMMUX(ldd12, 70, LDD<12>);
+ PMMUX(ldd13, 71, LDD<13>);
+ PMMUX(ldd14, 72, LDD<14>);
+ PMMUX(ldd16, 73, LDD<15>);
+ PMMUX(lcd-fclk, 74, L_FCLK_RD);
+ PMMUX(lcd-lclk, 75, L_LCLK_A0);
+ PMMUX(lcd-pclk, 76, L_PCLK_WR);
+ PMMUX(lcd-power, 87, gpio_out);
+ };
+
+ pinctrl_leds_default: leds-default {
+ PMMUX_LPM_HIGH(led-charging, 10, gpio_out);
+ PMMUX_LPM_HIGH(led-vibra, 82, gpio_out);
+ PMMUX_LPM_HIGH(led-blue, 97, gpio_out);
+ PMMUX_LPM_HIGH(led-orange, 98, gpio_out);
+ PMMUX_LPM_HIGH(led-keyboard, 115, gpio_out);
+ };
+
+ pinctrl_pwm0_default: pwm0-defaut {
+ PMMUX(pwm0, 16, PWM_OUT<0>);
+ };
+
+ pinctrl_qci_default: qci-defaut {
+ PMMUX(cif-dd6, 17, CIF_DD<6>);
+ PMMUX(cif-dd3, 50, CIF_DD<3>);
+ PMMUX(cif-dd2, 51, CIF_DD<2>);
+ PMMUX(cif-dd4, 52, CIF_DD<4>);
+ PMMUX(cif-mclk, 53, CIF_MCLK);
+ PMMUX(cif-pclk, 54, CIF_PCLK);
+ PMMUX_LPM_HIGH(mt9m111-nOE, 56, gpio_out);
+ PMMUX(cif-dd1, 55, CIF_DD<1>);
+ PMMUX(cif-dd0, 81, CIF_DD<0>);
+ PMMUX(cif-dd5, 48, CIF_DD<5>);
+ PMMUX(cif-fv, 84, CIF_FV);
+ PMMUX(cif-lv, 85, CIF_LV);
+ PMMUX(cif-dd7, 108, CIF_DD<7>);
+ };
+
+ pinctrl_mmc_default: mmc-default {
+ PMMUX(sd-insert, 15, gpio_in);
+ PMMUX(mmclk, 32, MMCLK);
+ PMMUX(sd-ro, 78, gpio_in);
+ PMMUX_LPM_LOW(sd-enable, 91, gpio_out);
+ PMMUX(mmdat0, 92, MMDAT<0>);
+ PMMUX(mmdat1, 109, MMDAT<1>);
+ PMMUX(mmdat2, 110, MMDAT<2>);
+ PMMUX(mmdat3, 111, MMDAT<3>);
+ PMMUX(mmcmd, 112, MMCMD);
+ };
+
+ pinctrl_stuart_default: stuart-default {
+ PMMUX_LPM_LOW(gps-unknown1, 23, gpio_out);
+ PMMUX_LPM_LOW(gps-on, 26, gpio_out);
+ PMMUX_LPM_LOW(gps-nreset, 27, gpio_out);
+ PMMUX(stuart-rxd, 46, STRXD);
+ PMMUX(stuart-txd, 47, STTXD);
+ PMMUX_LPM_LOW(gps-unknown2, 106, gpio_out);
+ PMMUX_LPM_LOW(gps-unknown3, 107, gpio_out);
+ };
+
+ pinctrl_usb_default: usb-default {
+ PMMUX(n-usb-detect, 13, gpio_in);
+ PMMUX_LPM_LOW(n-dplus-pullup, 22, gpio_out);
+ };
+
+ pinctrl_power_default: power-default {
+ PMMUX_LPM_LOW(charge-enable, 9, gpio_out);
+ PMMUX(charge-vdrop, 80, gpio_out);
+ PMMUX(ac-detect, 96, gpio_in);
+ };
+ };
+
+ pwm0: pwm@40b00000 {
+ status = "okay";
+ };
+
+ gpio: gpio@40e00000 {
+ status = "okay";
+ };
+
+ ffuart: serial@40100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ffuart_default>;
+ status = "okay";
+ };
+
+ btuart: serial@40200000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_btuart_default>;
+ status = "okay";
+ };
+
+ stuart: serial@40700000 {
+ status = "okay";
+ };
+
+ usb2phy: gpio-vbus@13 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <1>;
+ vbus-detect-gpio = <&gpio 13 GPIO_ACTIVE_LOW>;
+ wakeup;
+ };
+
+ pxa27x_udc: udc@40600000 {
+ status = "okay";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ phys = <&usb2phy>;
+ phys-names = "usb2phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ };
+
+ pwri2c: i2c@40f00180 {
+ status = "okay";
+
+ regulator@14 {
+ compatible = "maxim,max1586";
+ reg = <0x14>;
+ v3-gain = <1000000>;
+
+ regulators {
+ vcc_core: v3 {
+ regulator-name = "vcc_core";
+ regulator-compatible = "Output_V3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1705000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pxai2c1: i2c@40301680 {
+ mrvl,i2c-fast-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_default>;
+ status = "okay";
+
+ camera@5d {
+ compatible = "micron,mt9m111";
+ reg = <0x5d>;
+ gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+ remote = <&pxa_camera>;
+
+ port {
+ mt9m111_1: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&pxa_camera>;
+ };
+ };
+ };
+ };
+
+ keypad: keypad@41500000 {
+ status = "okay";
+ keypad,num-rows = <3>;
+ keypad,num-columns = <3>;
+ linux,keymap = <
+ 0x00000067 /* KEY_UP */
+ 0x0001006a /* KEY_RIGHT */
+ 0x000200e2 /* KEY_MEDIA */
+ 0x0100006c /* KEY_DOWN */
+ 0x0101001c /* KEY_ENTER */
+ 0x010200da /* KEY_CONNECT */
+ 0x02000069 /* KEY_LEFT */
+ 0x020100a9 /* KEY_PHONE */
+ 0x020200d4>; /* KEY_CAMERA */
+ marvell,debounce-interval = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keypad_default>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys_default>;
+ status = "okay";
+
+ power-button {
+ label = "GPIO Key Power";
+ linux,code = <174>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ };
+
+ hp-jack-detect {
+ label = "HP jack detect";
+ linux,code = <211>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume-up {
+ label = "Volume Up Key";
+ linux,code = <115>;
+ gpios = <&gpio 93 GPIO_ACTIVE_HIGH>;
+ };
+
+ volume-down {
+ label = "Volume Down Key";
+ linux,code = <114>;
+ gpios = <&gpio 94 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mmc0: mmc@41100000 {
+ vmmc-supply = <®_vmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc_default>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ pxa_camera: imaging@50000000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qci_default>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ qci: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mt9m111_1>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ rtc@40900000 {
+ status = "okay";
+ };
+
+ lcd-controller@40500000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_default>;
+ status = "okay";
+
+ port {
+ lcdc_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <16>;
+ };
+ };
+ };
+
+ ac97: sound@40500000 {
+ compatible = "marvell,pxa270-ac97";
+ reg = < 0x40500000 0x1000 >;
+ interrupts = <14>;
+ reset-gpios = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pinctrl_ac97_default >;
+ clocks = <&clks CLK_AC97>, <&clks CLK_AC97CONF>;
+ clock-names = "AC97CLK", "AC97CONFCLK";
+ dmas = <&pdma 8 0
+ &pdma 9 0
+ &pdma 10 0
+ &pdma 11 0
+ &pdma 12 0>;
+ dma-names = "pcm_pcm_mic_mono", "pcm_pcm_aux_mono_in",
+ "pcm_pcm_aux_mono_out", "pcm_pcm_stereo_in",
+ "pcm_pcm_stereo_out";
+ #sound-dai-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm9713: codec@0 {
+ reg = <0>;
+ compatible = "ac97,574d,4c13";
+ clocks = <&wm9713_bitclk>;
+ clock-names = "ac97_clk";
+ #sound-dai-cells = <0>;
+
+ wm9713_bitclk: ac97_bitclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12285000>;
+ status = "okay";
+ };
+ };
+ };
+
+ pxa_pcm_audio: snd-soc-pxa-audio {
+ compatible = "mrvl,pxa-pcm-audio";
+ #sound-dai-cells = <0>;
+ status = "okay";
+ };
+
+ lcd-controller@40500000 {
+ lcd-supply = <®_lcd_vmmc>;
+ };
+
+ docg3: flash@0 {
+ compatible = "m-systems,diskonchip-g3";
+ reg = <0x0 0x2000>;
+ };
+
+ };
+
+ reg_vmmc: regulator-vmcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 91 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_vmmc: regulator-lcd-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpio = <&gpio 87 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 4096000>;
+ pwm-names = "backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default>;
+ };
+
+ panel {
+ compatible = "toshiba,ltm0305a776";
+ lcd-type = "color-tft";
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc_out>;
+ };
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 240p {
+ /* 240x320p24 */
+ clock-frequency = <4545000>;
+ hactive = <240>;
+ vactive = <320>;
+ hfront-porch = <4>;
+ hback-porch = <6>;
+ hsync-len = <4>;
+ vback-porch = <5>;
+ vfront-porch = <3>;
+ vsync-len = <2>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_default>;
+
+ charger-led {
+ label = "mioa701:charging";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ vibrator {
+ label = "mioa701:vibra";
+ gpios = <&gpio 82 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ bluetooth-led {
+ label = "mioa701:blue";
+ gpios = <&gpio 97 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ orange-led {
+ label = "mioa701:orange";
+ gpios = <&gpio 98 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ keyboard-led {
+ label = "mioa701:keyboard";
+ gpios = <&gpio 115 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "MioA701";
+ simple-audio-card,widgets =
+ "Speaker", "Front Speaker",
+ "Speaker", "Rear Speaker",
+ "Microphone", "Headset",
+ "Microphone", "GSM Line Out",
+ "Line", "GSM Line In",
+ "Microphone", "Headset Mic",
+ "Microphone", "Front Mic";
+ simple-audio-card,routing =
+ /* Call Mic */
+ "Mic Bias", "Front Mic",
+ "MIC1", "Mic Bias",
+ /* Headset Mic */
+ "LINEL", "Headset Mic",
+ "LINER", "Headset Mic",
+ /* GSM Module */
+ "MONOIN", "GSM Line Out",
+ "PCBEEP", "GSM Line Out",
+ "GSM Line In", "MONO",
+ /* headphone connected to HPL, HPR */
+ "Headset", "HPL",
+ "Headset", "HPR",
+ /* front speaker connected to HPL, OUT3 */
+ "Front Speaker", "HPL",
+ "Front Speaker", "OUT3",
+ /* rear speaker connected to SPKL, SPKR */
+ "Rear Speaker", "SPKL",
+ "Rear Speaker", "SPKR";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ac97>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm9713>;
+ };
+
+ simple-audio-card,plat {
+ sound-dai = <&pxa_pcm_audio>;
+ };
+ };
+
+ ac_charger: charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-aca";
+ gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
+ };
+};
--
2.11.0
Hi Robert,
I love your patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.19-rc4 next-20180919]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Robert-Jarzmik/ARM-dts-pxa-add-mioa701-board-description/20180916-003257
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-oxnas_v6_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.2.0 make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/mioa701.dts:49.10-11 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Robert Jarzmik <[email protected]> writes:
> Add device-tree description of the Mitac MIO A701 board.
> This is aimed at replacing mioa701.c board file, and once stabilized,
> the leftover, such as the suspend resume mechanics will rely on a new
> IPL, and not the legacy Windows CE one.
>
> Signed-off-by: Robert Jarzmik <[email protected]>
> ---
> Since v1: fix lcd_supply and lcd_backlight
> These were depending on my internal tree changes, fit it.
> Since v2: take into account Rob's comments
> Since v3: take into account Marcel's comments
>
> This patch deserves some special "love review". As it will probably
> serve for a more broad pxa conversion to devicetree of the other boards,
> and because it touches almost all domains for a pxa platform (camera,
> video, audio, i2c, ...), it should be as clean as possible so that
> mistakes are not carried on ...
>
> Therefore I expect the review of this one to be long (ie. it won't land
> for v4.19), until it looks good enough.
Rob, would you respin that in your tester now all the missing dependencies have
hit Linus's master tree again please ?
--
Robert
Robert Jarzmik <[email protected]> writes:
> Add device-tree description of the Mitac MIO A701 board.
> This is aimed at replacing mioa701.c board file, and once stabilized,
> the leftover, such as the suspend resume mechanics will rely on a new
> IPL, and not the legacy Windows CE one.
>
> Signed-off-by: Robert Jarzmik <[email protected]>
> ---
> Since v1: fix lcd_supply and lcd_backlight
> These were depending on my internal tree changes, fit it.
> Since v2: take into account Rob's comments
> Since v3: take into account Marcel's comments
>
> This patch deserves some special "love review". As it will probably
> serve for a more broad pxa conversion to devicetree of the other boards,
> and because it touches almost all domains for a pxa platform (camera,
> video, audio, i2c, ...), it should be as clean as possible so that
> mistakes are not carried on ...
>
> Therefore I expect the review of this one to be long (ie. it won't land
> for v4.19), until it looks good enough.
Rob, would you respin that in your tester now all the missing dependencies have
hit Linus's master tree again please ?
--
Robert