The default implementation of regulator_set_load returns
REGULATOR_MODE_NORMAL, which is positive.
rt5663_i2c_probe should only do error handling when return value of
regulator_set_load is negative.
In this case, rt5663_i2c_probe should return error.
Also, consolidate err_irq into err_enable.
Fix the missing goto for temporary regmap and rt5663->regmap.
Signed-off-by: Cheng-Yi Chiang <[email protected]>
---
This patch is the fixup of the patch
e81a2a6d12e85 ASoC: rt5663: Add regulator support
sound/soc/codecs/rt5663.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index bb2c1ee4a836f..473a54d1ae2c5 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3522,10 +3522,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++) {
ret = regulator_set_load(rt5663->supplies[i].consumer,
RT5663_SUPPLY_CURRENT_UA);
- if (ret) {
+ if (ret < 0) {
dev_err(&i2c->dev,
- "Failed to set regulator %s, ret: %d\n",
+ "Failed to set regulator load on %s, ret: %d\n",
rt5663->supplies[i].supply, ret);
+ return ret;
}
}
@@ -3543,7 +3544,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "Failed to allocate temp register map: %d\n",
ret);
- return ret;
+ goto err_enable;
}
ret = regmap_read(regmap, RT5663_VENDOR_ID_2, &val);
@@ -3576,7 +3577,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(rt5663->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
- return ret;
+ goto err_enable;
}
/* reset and calibrate */
@@ -3686,17 +3687,19 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
rt5663_dai, ARRAY_SIZE(rt5663_dai));
if (ret)
- goto err_irq;
+ goto err_enable;
return 0;
-err_irq:
+
+ /*
+ * Error after enabling regulators should goto err_enable
+ * to disable regulators.
+ */
+err_enable:
if (i2c->irq)
free_irq(i2c->irq, rt5663);
-err_enable:
- dev_err(&i2c->dev,
- "%s: Disable regulator after probe error\n", __func__);
regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies);
return ret;
}
--
2.19.1.1215.g8438c0b245-goog
On Fri, Nov 16, 2018 at 05:28:56PM +0800, Cheng-Yi Chiang wrote:
> The default implementation of regulator_set_load returns
> REGULATOR_MODE_NORMAL, which is positive.
The stub does indeed do that however that just looks like a bug - the
actual implementation returns 0 on success and the other users don't
seem to expect to get a mode value back.
> rt5663_i2c_probe should only do error handling when return value of
> regulator_set_load is negative.
> In this case, rt5663_i2c_probe should return error.
However that's also true so the patch is valid.
The patch
ASoC: rt5663: Fix error handling of regulator_set_load
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 746dca0aebd4d77adccb76c500a60028a900dabb Mon Sep 17 00:00:00 2001
From: Cheng-Yi Chiang <[email protected]>
Date: Fri, 16 Nov 2018 17:28:56 +0800
Subject: [PATCH] ASoC: rt5663: Fix error handling of regulator_set_load
The default implementation of regulator_set_load returns
REGULATOR_MODE_NORMAL, which is positive. [This was a bug which is
being fixed but the change is valid anyway -- bronie]
rt5663_i2c_probe should only do error handling when return value of
regulator_set_load is negative.
In this case, rt5663_i2c_probe should return error.
Also, consolidate err_irq into err_enable.
Fix the missing goto for temporary regmap and rt5663->regmap.
Signed-off-by: Cheng-Yi Chiang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/rt5663.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index 29c059ed0682..da6647015708 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3525,10 +3525,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++) {
ret = regulator_set_load(rt5663->supplies[i].consumer,
RT5663_SUPPLY_CURRENT_UA);
- if (ret) {
+ if (ret < 0) {
dev_err(&i2c->dev,
- "Failed to set regulator %s, ret: %d\n",
+ "Failed to set regulator load on %s, ret: %d\n",
rt5663->supplies[i].supply, ret);
+ return ret;
}
}
@@ -3546,7 +3547,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "Failed to allocate temp register map: %d\n",
ret);
- return ret;
+ goto err_enable;
}
ret = regmap_read(regmap, RT5663_VENDOR_ID_2, &val);
@@ -3579,7 +3580,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(rt5663->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
- return ret;
+ goto err_enable;
}
/* reset and calibrate */
@@ -3689,17 +3690,19 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
rt5663_dai, ARRAY_SIZE(rt5663_dai));
if (ret)
- goto err_irq;
+ goto err_enable;
return 0;
-err_irq:
+
+ /*
+ * Error after enabling regulators should goto err_enable
+ * to disable regulators.
+ */
+err_enable:
if (i2c->irq)
free_irq(i2c->irq, rt5663);
-err_enable:
- dev_err(&i2c->dev,
- "%s: Disable regulator after probe error\n", __func__);
regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies);
return ret;
}
--
2.19.1