This patch adds OEM Mellanox commands and response handling. It also
defines OEM Get MAC Address handler to get and configure the device.
ncsi_oem_gma_handler_mlx: This handler send NCSI mellanox command for
getting mac address.
ncsi_rsp_handler_oem_mlx: This handles response received for all
mellanox OEM commands.
ncsi_rsp_handler_oem_mlx_gma: This handles get mac address response and
set it to device.
Signed-off-by: Vijay Khemka <[email protected]>
---
net/ncsi/internal.h | 5 +++++
net/ncsi/ncsi-manage.c | 25 ++++++++++++++++++++++++-
net/ncsi/ncsi-pkt.h | 9 +++++++++
net/ncsi/ncsi-rsp.c | 41 ++++++++++++++++++++++++++++++++++++++++-
4 files changed, 78 insertions(+), 2 deletions(-)
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 1dae77c54009..7f3eb1360b9b 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -73,10 +73,15 @@ enum {
#define NCSI_OEM_MFR_BCM_ID 0x113d
/* Broadcom specific OEM Command */
#define NCSI_OEM_BCM_CMD_GMA 0x01 /* CMD ID for Get MAC */
+/* Mellanox specific OEM Command */
+#define NCSI_OEM_MLX_CMD_GMA 0x00 /* CMD ID for Get MAC */
+#define NCSI_OEM_MLX_CMD_GMA_PARAM 0x1b /* Parameter for GMA */
/* OEM Command payload lengths*/
#define NCSI_OEM_BCM_CMD_GMA_LEN 12
+#define NCSI_OEM_MLX_CMD_GMA_LEN 8
/* Mac address offset in OEM response */
#define BCM_MAC_ADDR_OFFSET 28
+#define MLX_MAC_ADDR_OFFSET 8
struct ncsi_channel_version {
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index bfc43b28c7a6..eacb653ff987 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -675,12 +675,35 @@ static int ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca)
return ret;
}
+static int ncsi_oem_gma_handler_mlx(struct ncsi_cmd_arg *nca)
+{
+ unsigned char data[NCSI_OEM_MLX_CMD_GMA_LEN];
+ int ret = 0;
+
+ nca->payload = NCSI_OEM_MLX_CMD_GMA_LEN;
+
+ memset(data, 0, NCSI_OEM_MLX_CMD_GMA_LEN);
+ *(unsigned int *)data = ntohl(NCSI_OEM_MFR_MLX_ID);
+ data[5] = NCSI_OEM_MLX_CMD_GMA;
+ data[6] = NCSI_OEM_MLX_CMD_GMA_PARAM;
+
+ nca->data = data;
+
+ ret = ncsi_xmit_cmd(nca);
+ if (ret)
+ netdev_err(nca->ndp->ndev.dev,
+ "NCSI: Failed to transmit cmd 0x%x during configure\n",
+ nca->type);
+ return ret;
+}
+
/* OEM Command handlers initialization */
static struct ncsi_oem_gma_handler {
unsigned int mfr_id;
int (*handler)(struct ncsi_cmd_arg *nca);
} ncsi_oem_gma_handlers[] = {
- { NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm }
+ { NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm },
+ { NCSI_OEM_MFR_MLX_ID, ncsi_oem_gma_handler_mlx }
};
static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id)
diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
index 4d3f06be38bd..2a6d83a596c9 100644
--- a/net/ncsi/ncsi-pkt.h
+++ b/net/ncsi/ncsi-pkt.h
@@ -165,6 +165,15 @@ struct ncsi_rsp_oem_pkt {
unsigned char data[]; /* Payload data */
};
+/* Mellanox Response Data */
+struct ncsi_rsp_oem_mlx_pkt {
+ unsigned char cmd_rev; /* Command Revision */
+ unsigned char cmd; /* Command ID */
+ unsigned char param; /* Parameter */
+ unsigned char optional; /* Optional data */
+ unsigned char data[]; /* Data */
+};
+
/* Broadcom Response Data */
struct ncsi_rsp_oem_bcm_pkt {
unsigned char ver; /* Payload Version */
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index 77e07ba3f493..ba9a4ba97c64 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -611,6 +611,45 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
return 0;
}
+/* Response handler for Mellanox command Get Mac Address */
+static int ncsi_rsp_handler_oem_mlx_gma(struct ncsi_request *nr)
+{
+ struct ncsi_dev_priv *ndp = nr->ndp;
+ struct net_device *ndev = ndp->ndev.dev;
+ const struct net_device_ops *ops = ndev->netdev_ops;
+ struct ncsi_rsp_oem_pkt *rsp;
+ struct sockaddr saddr;
+ int ret = 0;
+
+ /* Get the response header */
+ rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+
+ saddr.sa_family = ndev->type;
+ ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+ memcpy(saddr.sa_data, &rsp->data[MLX_MAC_ADDR_OFFSET], ETH_ALEN);
+ ret = ops->ndo_set_mac_address(ndev, &saddr);
+ if (ret < 0)
+ netdev_warn(ndev, "NCSI: 'Writing mac address to device failed\n");
+
+ return ret;
+}
+
+/* Response handler for Mellanox card */
+static int ncsi_rsp_handler_oem_mlx(struct ncsi_request *nr)
+{
+ struct ncsi_rsp_oem_mlx_pkt *mlx;
+ struct ncsi_rsp_oem_pkt *rsp;
+
+ /* Get the response header */
+ rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+ mlx = (struct ncsi_rsp_oem_mlx_pkt *)(rsp->data);
+
+ if (mlx->cmd == NCSI_OEM_MLX_CMD_GMA &&
+ mlx->param == NCSI_OEM_MLX_CMD_GMA_PARAM)
+ return ncsi_rsp_handler_oem_mlx_gma(nr);
+ return 0;
+}
+
/* Response handler for Broadcom command Get Mac Address */
static int ncsi_rsp_handler_oem_bcm_gma(struct ncsi_request *nr)
{
@@ -655,7 +694,7 @@ static struct ncsi_rsp_oem_handler {
unsigned int mfr_id;
int (*handler)(struct ncsi_request *nr);
} ncsi_rsp_oem_handlers[] = {
- { NCSI_OEM_MFR_MLX_ID, NULL },
+ { NCSI_OEM_MFR_MLX_ID, ncsi_rsp_handler_oem_mlx },
{ NCSI_OEM_MFR_BCM_ID, ncsi_rsp_handler_oem_bcm }
};
--
2.17.1
From: Vijay Khemka <[email protected]>
Date: Tue, 20 Nov 2018 12:35:16 -0800
> +static int ncsi_oem_gma_handler_mlx(struct ncsi_cmd_arg *nca)
> +{
> + unsigned char data[NCSI_OEM_MLX_CMD_GMA_LEN];
> + int ret = 0;
> +
> + nca->payload = NCSI_OEM_MLX_CMD_GMA_LEN;
> +
> + memset(data, 0, NCSI_OEM_MLX_CMD_GMA_LEN);
> + *(unsigned int *)data = ntohl(NCSI_OEM_MFR_MLX_ID);
'data' is not necessarily aligned on an unsigned int boundary.
But second of all you want to use a fixed size type like "u32" or
similar here, not "unsigned int".
Altogether, something like:
union {
u8 data_u8[NCSI_OEM_MLX_CMD_GMA_LEN];
u32 data_u32[[NCSI_OEM_MLX_CMD_GMA_LEN / sizeof(u32)];
} u;
memset(&u, 0, sizeof(u));
u.data_u32[0] = ntohl(NCSI_OEM_MFR_MLX_ID);
u.data_u8[5] = NCSI_OEM_MLX_CMD_GMA;
u.data_u8[6] = NCSI_OEM_MLX_CMD_GMA_PARAM;
If the rest of the ncsi driver has crud like this, it all needs
to be fixed up similarly.
Thanks David,
I will fix this and upload next version.
Regards
-Vijay
On 11/21/18, 4:55 PM, "David Miller" <[email protected]> wrote:
From: Vijay Khemka <[email protected]>
Date: Tue, 20 Nov 2018 12:35:16 -0800
> +static int ncsi_oem_gma_handler_mlx(struct ncsi_cmd_arg *nca)
> +{
> + unsigned char data[NCSI_OEM_MLX_CMD_GMA_LEN];
> + int ret = 0;
> +
> + nca->payload = NCSI_OEM_MLX_CMD_GMA_LEN;
> +
> + memset(data, 0, NCSI_OEM_MLX_CMD_GMA_LEN);
> + *(unsigned int *)data = ntohl(NCSI_OEM_MFR_MLX_ID);
'data' is not necessarily aligned on an unsigned int boundary.
But second of all you want to use a fixed size type like "u32" or
similar here, not "unsigned int".
Altogether, something like:
union {
u8 data_u8[NCSI_OEM_MLX_CMD_GMA_LEN];
u32 data_u32[[NCSI_OEM_MLX_CMD_GMA_LEN / sizeof(u32)];
} u;
memset(&u, 0, sizeof(u));
u.data_u32[0] = ntohl(NCSI_OEM_MFR_MLX_ID);
u.data_u8[5] = NCSI_OEM_MLX_CMD_GMA;
u.data_u8[6] = NCSI_OEM_MLX_CMD_GMA_PARAM;
If the rest of the ncsi driver has crud like this, it all needs
to be fixed up similarly.