2018-11-27 14:30:32

by Patrick Havelange

Subject: [PATCH 1/1] ARM: dts: ls1021a: add nodes for PWMs

The LS1021A has 8 possible PWMs, so adding them (disabled by default)

Signed-off-by: Patrick Havelange <[email protected]>
---
arch/arm/boot/dts/ls1021a.dtsi | 96 ++++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index bdd6e66a79ad..d3014da9a66b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -525,6 +525,102 @@
status = "disabled";
};

+ pwm0: pwm@29d0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm1: pwm@29e0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29e0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm2: pwm@29f0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29f0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm3: pwm@2a00000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a00000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm4: pwm@2a10000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a10000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm5: pwm@2a20000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a20000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm6: pwm@2a30000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a30000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm7: pwm@2a40000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a40000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
--
2.17.1

2018-12-05 01:18:43

by Shawn Guo

Subject: Re: [PATCH 1/1] ARM: dts: ls1021a: add nodes for PWMs

On Tue, Nov 27, 2018 at 03:09:44PM +0100, Patrick Havelange wrote:
> The LS1021A has 8 possible PWMs, so adding them (disabled by default)
>
> Signed-off-by: Patrick Havelange <[email protected]>

Applied, thanks.