2018-11-28 09:55:10

by Brian Masney

Subject: [PATCH] ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer

This patch correctly sets the gpios property for the ak8963
magnetometer's DRDY pin so that interrupts work properly.

Signed-off-by: Brian Masney <[email protected]>
---
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index fe2b5524a679..551d262a044a 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -368,8 +368,7 @@
ak8963@f {
compatible = "asahi-kasei,ak8963";
reg = <0x0f>;
- // Currently only works in polling mode.
- // gpios = <&msmgpio 61 0>;
+ gpios = <&msmgpio 67 0>;
vid-supply = <&pm8941_lvs1>;
vdd-supply = <&pm8941_l17>;
};
--
2.17.2

2018-11-28 23:24:37

by Andy Gross

Subject: Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer

On Wed, Nov 28, 2018 at 04:53:35AM -0500, Brian Masney wrote:
> This patch correctly sets the gpios property for the ak8963
> magnetometer's DRDY pin so that interrupts work properly.
>
> Signed-off-by: Brian Masney <[email protected]>
> ---

Queued. Thanks for the patch.


Andy