2018-12-03 21:37:44

by Rob Herring (Arm)

Subject: [PATCH v2 13/34] dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file

It is best practice to have 1 binding per file, so board level bindings
should be separate for various misc SoC bindings.

Cc: Mark Rutland <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/arm/amlogic.txt | 29 -------------------
.../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
2 files changed, 28 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 4498292b833d..f5c8d50a3506 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -107,32 +107,3 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,s400" (Meson axg a113d)

- "amlogic,u200" (Meson g12a s905d2)
-
-Amlogic Meson Firmware registers Interface
-------------------------------------------
-
-The Meson SoCs have a register bank with status and data shared with the
-secure firmware.
-
-Required properties:
- - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
-
-Properties should indentify components of this register interface :
-
-Meson GX SoC Information
-------------------------
-A firmware register encodes the SoC type, package and revision information on
-the Meson GX SoCs.
-If present, the following property should be added :
-
-Optional properties:
- - amlogic,has-chip-id: If present, the interface gives the current SoC version.
-
-Example
--------
-
-ao-secure@140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
-};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
new file mode 100644
index 000000000000..c67d9f48fb91
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
@@ -0,0 +1,28 @@
+Amlogic Meson Firmware registers Interface
+------------------------------------------
+
+The Meson SoCs have a register bank with status and data shared with the
+secure firmware.
+
+Required properties:
+ - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
+
+Properties should indentify components of this register interface :
+
+Meson GX SoC Information
+------------------------
+A firmware register encodes the SoC type, package and revision information on
+the Meson GX SoCs.
+If present, the following property should be added :
+
+Optional properties:
+ - amlogic,has-chip-id: If present, the interface gives the current SoC version.
+
+Example
+-------
+
+ao-secure@140 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
+ reg = <0x0 0x140 0x0 0x140>;
+ amlogic,has-chip-id;
+};
--
2.19.1

2018-12-04 08:33:49

by Neil Armstrong

Subject: Re: [PATCH v2 13/34] dt-bindings: arm: amlogic: Move 'amlogic, meson-gx-ao-secure' binding to its own file

On 03/12/2018 22:32, Rob Herring wrote:
> It is best practice to have 1 binding per file, so board level bindings
> should be separate for various misc SoC bindings.
>
> Cc: Mark Rutland <[email protected]>
> Cc: Carlo Caione <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/amlogic.txt | 29 -------------------
> .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
> 2 files changed, 28 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
> index 4498292b833d..f5c8d50a3506 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic.txt
> +++ b/Documentation/devicetree/bindings/arm/amlogic.txt
> @@ -107,32 +107,3 @@ Board compatible values (alphabetically, grouped by SoC):
> - "amlogic,s400" (Meson axg a113d)
>
> - "amlogic,u200" (Meson g12a s905d2)
> -
> -Amlogic Meson Firmware registers Interface
> -------------------------------------------
> -
> -The Meson SoCs have a register bank with status and data shared with the
> -secure firmware.
> -
> -Required properties:
> - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
> -
> -Properties should indentify components of this register interface :
> -
> -Meson GX SoC Information
> -------------------------
> -A firmware register encodes the SoC type, package and revision information on
> -the Meson GX SoCs.
> -If present, the following property should be added :
> -
> -Optional properties:
> - - amlogic,has-chip-id: If present, the interface gives the current SoC version.
> -
> -Example
> --------
> -
> -ao-secure@140 {
> - compatible = "amlogic,meson-gx-ao-secure", "syscon";
> - reg = <0x0 0x140 0x0 0x140>;
> - amlogic,has-chip-id;
> -};
> diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
> new file mode 100644
> index 000000000000..c67d9f48fb91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
> @@ -0,0 +1,28 @@
> +Amlogic Meson Firmware registers Interface
> +------------------------------------------
> +
> +The Meson SoCs have a register bank with status and data shared with the
> +secure firmware.
> +
> +Required properties:
> + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
> +
> +Properties should indentify components of this register interface :
> +
> +Meson GX SoC Information
> +------------------------
> +A firmware register encodes the SoC type, package and revision information on
> +the Meson GX SoCs.
> +If present, the following property should be added :
> +
> +Optional properties:
> + - amlogic,has-chip-id: If present, the interface gives the current SoC version.
> +
> +Example
> +-------
> +
> +ao-secure@140 {
> + compatible = "amlogic,meson-gx-ao-secure", "syscon";
> + reg = <0x0 0x140 0x0 0x140>;
> + amlogic,has-chip-id;
> +};
>

Acked-by: Neil Armstrong <[email protected]>

2018-12-05 01:02:43

by Kevin Hilman

Subject: Re: [PATCH v2 13/34] dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file

Rob Herring <[email protected]> writes:

> It is best practice to have 1 binding per file, so board level bindings
> should be separate for various misc SoC bindings.
>
> Cc: Mark Rutland <[email protected]>
> Cc: Carlo Caione <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/amlogic.txt | 29 -------------------
> .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
> 2 files changed, 28 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt

Acked-by: Kevin Hilman <[email protected]>

But this isn't really related to the schema series is it? If you
prefer, I can just queue this one separately via my tree.

Kevin

2018-12-05 04:21:05

by Rob Herring (Arm)

Subject: Re: [PATCH v2 13/34] dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file

On Tue, Dec 4, 2018 at 7:01 PM Kevin Hilman <[email protected]> wrote:
>
> Rob Herring <[email protected]> writes:
>
> > It is best practice to have 1 binding per file, so board level bindings
> > should be separate for various misc SoC bindings.
> >
> > Cc: Mark Rutland <[email protected]>
> > Cc: Carlo Caione <[email protected]>
> > Cc: Kevin Hilman <[email protected]>
> > Cc: [email protected]
> > Cc: [email protected]
> > Cc: [email protected]
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
> > .../devicetree/bindings/arm/amlogic.txt | 29 -------------------
> > .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
> > 2 files changed, 28 insertions(+), 29 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
>
> Acked-by: Kevin Hilman <[email protected]>
>
> But this isn't really related to the schema series is it? If you
> prefer, I can just queue this one separately via my tree.

Yes, you can take it.

Rob

2019-01-09 16:43:32

by Rob Herring (Arm)

Subject: Re: [PATCH v2 13/34] dt-bindings: arm: amlogic: Move 'amlogic,meson-gx-ao-secure' binding to its own file

On Tue, Dec 4, 2018 at 10:18 PM Rob Herring <[email protected]> wrote:
>
> On Tue, Dec 4, 2018 at 7:01 PM Kevin Hilman <[email protected]> wrote:
> >
> > Rob Herring <[email protected]> writes:
> >
> > > It is best practice to have 1 binding per file, so board level bindings
> > > should be separate for various misc SoC bindings.
> > >
> > > Cc: Mark Rutland <[email protected]>
> > > Cc: Carlo Caione <[email protected]>
> > > Cc: Kevin Hilman <[email protected]>
> > > Cc: [email protected]
> > > Cc: [email protected]
> > > Cc: [email protected]
> > > Signed-off-by: Rob Herring <[email protected]>
> > > ---
> > > .../devicetree/bindings/arm/amlogic.txt | 29 -------------------
> > > .../amlogic/amlogic,meson-gx-ao-secure.txt | 28 ++++++++++++++++++
> > > 2 files changed, 28 insertions(+), 29 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
> >
> > Acked-by: Kevin Hilman <[email protected]>
> >
> > But this isn't really related to the schema series is it? If you
> > prefer, I can just queue this one separately via my tree.
>
> Yes, you can take it.

Hey Kevin, doesn't look like this got applied.

Rob