con_flag_test_and_set() sets CON_FLAG_KEEPALIVE_PENDING and
CON_FLAG_WRITE_PENDING flags without protection in ceph_con_keepalive().
It triggers WARN_ON() in clear_standby() if the flags are set after
con_fault() changes connection state to CON_STATE_STANDBY. Move
con_flag_test_and_set() to be called before releasing the lock and store
the condition to check after the critical section.
Reported-by: [email protected]
Signed-off-by: Myungho Jung <[email protected]>
---
net/ceph/messenger.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 2f126eff275d..e15da22d4f37 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3216,12 +3216,16 @@ void ceph_msg_revoke_incoming(struct ceph_msg *msg)
*/
void ceph_con_keepalive(struct ceph_connection *con)
{
+ bool pending;
+
dout("con_keepalive %p\n", con);
mutex_lock(&con->mutex);
clear_standby(con);
+ pending = (con_flag_test_and_set(con,
+ CON_FLAG_KEEPALIVE_PENDING) == 0 &&
+ con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0);
mutex_unlock(&con->mutex);
- if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
- con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
+ if (pending)
queue_con(con);
}
EXPORT_SYMBOL(ceph_con_keepalive);
--
2.17.1
On Thu, Dec 27, 2018 at 8:08 PM Myungho Jung <[email protected]> wrote:
>
> con_flag_test_and_set() sets CON_FLAG_KEEPALIVE_PENDING and
> CON_FLAG_WRITE_PENDING flags without protection in ceph_con_keepalive().
> It triggers WARN_ON() in clear_standby() if the flags are set after
> con_fault() changes connection state to CON_STATE_STANDBY. Move
> con_flag_test_and_set() to be called before releasing the lock and store
> the condition to check after the critical section.
>
> Reported-by: [email protected]
> Signed-off-by: Myungho Jung <[email protected]>
> ---
> net/ceph/messenger.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> index 2f126eff275d..e15da22d4f37 100644
> --- a/net/ceph/messenger.c
> +++ b/net/ceph/messenger.c
> @@ -3216,12 +3216,16 @@ void ceph_msg_revoke_incoming(struct ceph_msg *msg)
> */
> void ceph_con_keepalive(struct ceph_connection *con)
> {
> + bool pending;
> +
> dout("con_keepalive %p\n", con);
> mutex_lock(&con->mutex);
> clear_standby(con);
> + pending = (con_flag_test_and_set(con,
> + CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> + con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0);
> mutex_unlock(&con->mutex);
> - if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> - con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> + if (pending)
> queue_con(con);
> }
> EXPORT_SYMBOL(ceph_con_keepalive);
Hi Myungho,
Were you able to reproduce? If so, did you use the syzkaller output or
something else?
Thanks,
Ilya
On Wed, Jan 02, 2019 at 04:42:47PM +0100, Ilya Dryomov wrote:
> On Thu, Dec 27, 2018 at 8:08 PM Myungho Jung <[email protected]> wrote:
> >
> > con_flag_test_and_set() sets CON_FLAG_KEEPALIVE_PENDING and
> > CON_FLAG_WRITE_PENDING flags without protection in ceph_con_keepalive().
> > It triggers WARN_ON() in clear_standby() if the flags are set after
> > con_fault() changes connection state to CON_STATE_STANDBY. Move
> > con_flag_test_and_set() to be called before releasing the lock and store
> > the condition to check after the critical section.
> >
> > Reported-by: [email protected]
> > Signed-off-by: Myungho Jung <[email protected]>
> > ---
> > net/ceph/messenger.c | 8 ++++++--
> > 1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> > index 2f126eff275d..e15da22d4f37 100644
> > --- a/net/ceph/messenger.c
> > +++ b/net/ceph/messenger.c
> > @@ -3216,12 +3216,16 @@ void ceph_msg_revoke_incoming(struct ceph_msg *msg)
> > */
> > void ceph_con_keepalive(struct ceph_connection *con)
> > {
> > + bool pending;
> > +
> > dout("con_keepalive %p\n", con);
> > mutex_lock(&con->mutex);
> > clear_standby(con);
> > + pending = (con_flag_test_and_set(con,
> > + CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> > + con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0);
> > mutex_unlock(&con->mutex);
> > - if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> > - con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> > + if (pending)
> > queue_con(con);
> > }
> > EXPORT_SYMBOL(ceph_con_keepalive);
>
> Hi Myungho,
>
> Were you able to reproduce? If so, did you use the syzkaller output or
> something else?
>
> Thanks,
>
> Ilya
Hi Ilya,
I reproduced on vm using syzkaller utils and verified the fix by syzbot.
Thanks,
Myungho
On Thu, Jan 3, 2019 at 4:50 AM Myungho Jung <[email protected]> wrote:
> I reproduced on vm using syzkaller utils and verified the fix by syzbot.
Hi Myungho,
I think this might be a better fix:
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index d5718284db57..c5f5313e3537 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3205,10 +3205,11 @@ void ceph_con_keepalive(struct ceph_connection *con)
{
dout("con_keepalive %p\n", con);
mutex_lock(&con->mutex);
+ con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
clear_standby(con);
mutex_unlock(&con->mutex);
- if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
- con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
+
+ if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
queue_con(con);
}
EXPORT_SYMBOL(ceph_con_keepalive);
WRITE_PENDING can be set without con->mutex held from socket callbacks.
This is the reason we use atomic bit ops here, so testing WRITE_PENDING
under the lock didn't make sense to me.
At the same time, KEEPALIVE_PENDING could have been a non-atomic flag.
I spent some time trying to make sense of conditioning queue_con() call
on the previous value of KEEPALIVE_PENDING and couldn't see any, so I'm
setting it with con_flag_set(), making ceph_con_keepalive() symmetric
with ceph_con_send().
Thanks,
Ilya
On Mon, Jan 14, 2019 at 09:37:25PM +0100, Ilya Dryomov wrote:
> On Thu, Jan 3, 2019 at 4:50 AM Myungho Jung <[email protected]> wrote:
> > I reproduced on vm using syzkaller utils and verified the fix by syzbot.
>
> Hi Myungho,
>
> I think this might be a better fix:
>
> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> index d5718284db57..c5f5313e3537 100644
> --- a/net/ceph/messenger.c
> +++ b/net/ceph/messenger.c
> @@ -3205,10 +3205,11 @@ void ceph_con_keepalive(struct ceph_connection *con)
> {
> dout("con_keepalive %p\n", con);
> mutex_lock(&con->mutex);
> + con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
> clear_standby(con);
> mutex_unlock(&con->mutex);
> - if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> - con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> +
> + if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> queue_con(con);
> }
> EXPORT_SYMBOL(ceph_con_keepalive);
>
> WRITE_PENDING can be set without con->mutex held from socket callbacks.
> This is the reason we use atomic bit ops here, so testing WRITE_PENDING
> under the lock didn't make sense to me.
>
> At the same time, KEEPALIVE_PENDING could have been a non-atomic flag.
> I spent some time trying to make sense of conditioning queue_con() call
> on the previous value of KEEPALIVE_PENDING and couldn't see any, so I'm
> setting it with con_flag_set(), making ceph_con_keepalive() symmetric
> with ceph_con_send().
>
> Thanks,
>
> Ilya
Hi Ilya,
Yes, it looks clear and makes sense to have an atomic operation in if statement
but it still triggers warning. KEEPALIVE_PENDING should be set after
clear_standby() because con_fault() can be called right before acquiring the
lock here which sets the flag in standby state. I tesed the change with syzbot
and confirmed there was no warning.
Thanks,
Myungho
On Tue, Jan 15, 2019 at 7:56 AM Myungho Jung <[email protected]> wrote:
>
> On Mon, Jan 14, 2019 at 09:37:25PM +0100, Ilya Dryomov wrote:
> > On Thu, Jan 3, 2019 at 4:50 AM Myungho Jung <[email protected]> wrote:
> > > I reproduced on vm using syzkaller utils and verified the fix by syzbot.
> >
> > Hi Myungho,
> >
> > I think this might be a better fix:
> >
> > diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> > index d5718284db57..c5f5313e3537 100644
> > --- a/net/ceph/messenger.c
> > +++ b/net/ceph/messenger.c
> > @@ -3205,10 +3205,11 @@ void ceph_con_keepalive(struct ceph_connection *con)
> > {
> > dout("con_keepalive %p\n", con);
> > mutex_lock(&con->mutex);
> > + con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
> > clear_standby(con);
> > mutex_unlock(&con->mutex);
> > - if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
> > - con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> > +
> > + if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
> > queue_con(con);
> > }
> > EXPORT_SYMBOL(ceph_con_keepalive);
> >
> > WRITE_PENDING can be set without con->mutex held from socket callbacks.
> > This is the reason we use atomic bit ops here, so testing WRITE_PENDING
> > under the lock didn't make sense to me.
> >
> > At the same time, KEEPALIVE_PENDING could have been a non-atomic flag.
> > I spent some time trying to make sense of conditioning queue_con() call
> > on the previous value of KEEPALIVE_PENDING and couldn't see any, so I'm
> > setting it with con_flag_set(), making ceph_con_keepalive() symmetric
> > with ceph_con_send().
> >
> > Thanks,
> >
> > Ilya
>
> Hi Ilya,
>
> Yes, it looks clear and makes sense to have an atomic operation in if statement
> but it still triggers warning. KEEPALIVE_PENDING should be set after
> clear_standby() because con_fault() can be called right before acquiring the
> lock here which sets the flag in standby state. I tesed the change with syzbot
> and confirmed there was no warning.
Right, it still triggers one of the warnings. I was too focused on
WRITE_PENDING and missed that in plain sight. I'll update the patch.
Thanks for testing!
Ilya