2019-01-14 20:22:32

by Sebastien Bourdelin

Subject: [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support

This commit allow the driver to work with device-tree.

Signed-off-by: Sebastien Bourdelin <[email protected]>
---
v2 -> v3:
- remove of_match_ptr: Suggested by Jonathan Cameron <[email protected]>
- minor style fixup
- rebase on master
v1 -> v2:
- add missing of.h header in bme680_spi.c
---
drivers/iio/chemical/bme680_i2c.c | 7 +++++++
drivers/iio/chemical/bme680_spi.c | 8 ++++++++
2 files changed, 15 insertions(+)

diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index 06d4be539d2e..b2f805b6b36a 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -70,10 +70,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);

+static const struct of_device_id bme680_of_i2c_match[] = {
+ { .compatible = "bosch,bme680", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
+
static struct i2c_driver bme680_i2c_driver = {
.driver = {
.name = "bme680_i2c",
.acpi_match_table = ACPI_PTR(bme680_acpi_match),
+ .of_match_table = bme680_of_i2c_match,
},
.probe = bme680_i2c_probe,
.id_table = bme680_i2c_id,
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
index c9fb05e8d0b9..d0b7bdd3f066 100644
--- a/drivers/iio/chemical/bme680_spi.c
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -6,6 +6,7 @@
*/
#include <linux/acpi.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>

@@ -110,10 +111,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);

+static const struct of_device_id bme680_of_spi_match[] = {
+ { .compatible = "bosch,bme680", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
+
static struct spi_driver bme680_spi_driver = {
.driver = {
.name = "bme680_spi",
.acpi_match_table = ACPI_PTR(bme680_acpi_match),
+ .of_match_table = bme680_of_spi_match,
},
.probe = bme680_spi_probe,
.id_table = bme680_spi_id,
--
2.20.1

2019-01-14 20:22:55

by Sebastien Bourdelin

Subject: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680

BME680 is a pressure/temperature/humidity/voc sensor.

Signed-off-by: Sebastien Bourdelin <[email protected]>
---
v2 -> v3:
- change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <[email protected]>
- rebase on master
---
.../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt

diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
new file mode 100644
index 000000000000..7f3827cfb2ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@76 {
+ compatible = "bosch,bme680";
+ reg = <0x76>;
+};
--
2.20.1

2019-01-16 09:40:27

by Himanshu Jha

Subject: Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680

On Mon, Jan 14, 2019 at 03:19:14PM -0500, Sebastien Bourdelin wrote:
> BME680 is a pressure/temperature/humidity/voc sensor.
>
> Signed-off-by: Sebastien Bourdelin <[email protected]>
> ---
> v2 -> v3:
> - change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <[email protected]>
> - rebase on master
> ---
> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> new file mode 100644
> index 000000000000..7f3827cfb2ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> @@ -0,0 +1,11 @@
> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
> +
> +Required properties:
> +- compatible: must be "bosch,bme680"
> +
> +Example:
> +
> +bme680@76 {
> + compatible = "bosch,bme680";
> + reg = <0x76>;
> +};

Thanks,

Acked-by: Himanshu Jha <[email protected]>

--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology

2019-01-16 09:43:46

by Himanshu Jha

Subject: Re: [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support

On Mon, Jan 14, 2019 at 03:19:13PM -0500, Sebastien Bourdelin wrote:
> This commit allow the driver to work with device-tree.
>
> Signed-off-by: Sebastien Bourdelin <[email protected]>
> ---

Acked-by: Himanshu Jha <[email protected]>

Thanks!

> v2 -> v3:
> - remove of_match_ptr: Suggested by Jonathan Cameron <[email protected]>
> - minor style fixup
> - rebase on master
> v1 -> v2:
> - add missing of.h header in bme680_spi.c
> ---
> drivers/iio/chemical/bme680_i2c.c | 7 +++++++
> drivers/iio/chemical/bme680_spi.c | 8 ++++++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
> index 06d4be539d2e..b2f805b6b36a 100644
> --- a/drivers/iio/chemical/bme680_i2c.c
> +++ b/drivers/iio/chemical/bme680_i2c.c
> @@ -70,10 +70,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
> };
> MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
>
> +static const struct of_device_id bme680_of_i2c_match[] = {
> + { .compatible = "bosch,bme680", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
> +
> static struct i2c_driver bme680_i2c_driver = {
> .driver = {
> .name = "bme680_i2c",
> .acpi_match_table = ACPI_PTR(bme680_acpi_match),
> + .of_match_table = bme680_of_i2c_match,
> },
> .probe = bme680_i2c_probe,
> .id_table = bme680_i2c_id,
> diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
> index c9fb05e8d0b9..d0b7bdd3f066 100644
> --- a/drivers/iio/chemical/bme680_spi.c
> +++ b/drivers/iio/chemical/bme680_spi.c
> @@ -6,6 +6,7 @@
> */
> #include <linux/acpi.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/regmap.h>
> #include <linux/spi/spi.h>
>
> @@ -110,10 +111,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
> };
> MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
>
> +static const struct of_device_id bme680_of_spi_match[] = {
> + { .compatible = "bosch,bme680", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
> +
> static struct spi_driver bme680_spi_driver = {
> .driver = {
> .name = "bme680_spi",
> .acpi_match_table = ACPI_PTR(bme680_acpi_match),
> + .of_match_table = bme680_of_spi_match,
> },
> .probe = bme680_spi_probe,
> .id_table = bme680_spi_id,
> --
> 2.20.1
>

--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology

2019-01-16 11:14:02

by Rob Herring

Subject: Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680

On Mon, 14 Jan 2019 15:19:14 -0500, Sebastien Bourdelin wrote:
> BME680 is a pressure/temperature/humidity/voc sensor.
>
> Signed-off-by: Sebastien Bourdelin <[email protected]>
> ---
> v2 -> v3:
> - change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <[email protected]>
> - rebase on master
> ---
> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
>

Reviewed-by: Rob Herring <[email protected]>

2019-01-19 17:46:05

by Jonathan Cameron

Subject: Re: [PATCH v3 1/2] iio: chemical: bme680: Add device-tree support

On Wed, 16 Jan 2019 00:17:13 +0530
Himanshu Jha <[email protected]> wrote:

> On Mon, Jan 14, 2019 at 03:19:13PM -0500, Sebastien Bourdelin wrote:
> > This commit allow the driver to work with device-tree.
> >
> > Signed-off-by: Sebastien Bourdelin <[email protected]>
> > ---
>
> Acked-by: Himanshu Jha <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it and see if we missed anything.

Thanks,

Jonathan
>
> Thanks!
>
> > v2 -> v3:
> > - remove of_match_ptr: Suggested by Jonathan Cameron <[email protected]>
> > - minor style fixup
> > - rebase on master
> > v1 -> v2:
> > - add missing of.h header in bme680_spi.c
> > ---
> > drivers/iio/chemical/bme680_i2c.c | 7 +++++++
> > drivers/iio/chemical/bme680_spi.c | 8 ++++++++
> > 2 files changed, 15 insertions(+)
> >
> > diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
> > index 06d4be539d2e..b2f805b6b36a 100644
> > --- a/drivers/iio/chemical/bme680_i2c.c
> > +++ b/drivers/iio/chemical/bme680_i2c.c
> > @@ -70,10 +70,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
> > };
> > MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
> >
> > +static const struct of_device_id bme680_of_i2c_match[] = {
> > + { .compatible = "bosch,bme680", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
> > +
> > static struct i2c_driver bme680_i2c_driver = {
> > .driver = {
> > .name = "bme680_i2c",
> > .acpi_match_table = ACPI_PTR(bme680_acpi_match),
> > + .of_match_table = bme680_of_i2c_match,
> > },
> > .probe = bme680_i2c_probe,
> > .id_table = bme680_i2c_id,
> > diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
> > index c9fb05e8d0b9..d0b7bdd3f066 100644
> > --- a/drivers/iio/chemical/bme680_spi.c
> > +++ b/drivers/iio/chemical/bme680_spi.c
> > @@ -6,6 +6,7 @@
> > */
> > #include <linux/acpi.h>
> > #include <linux/module.h>
> > +#include <linux/of.h>
> > #include <linux/regmap.h>
> > #include <linux/spi/spi.h>
> >
> > @@ -110,10 +111,17 @@ static const struct acpi_device_id bme680_acpi_match[] = {
> > };
> > MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
> >
> > +static const struct of_device_id bme680_of_spi_match[] = {
> > + { .compatible = "bosch,bme680", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
> > +
> > static struct spi_driver bme680_spi_driver = {
> > .driver = {
> > .name = "bme680_spi",
> > .acpi_match_table = ACPI_PTR(bme680_acpi_match),
> > + .of_match_table = bme680_of_spi_match,
> > },
> > .probe = bme680_spi_probe,
> > .id_table = bme680_spi_id,
> > --
> > 2.20.1
> >
>

2019-01-19 17:46:55

by Jonathan Cameron

Subject: Re: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680

On Tue, 15 Jan 2019 14:28:02 -0600
Rob Herring <[email protected]> wrote:

> On Mon, 14 Jan 2019 15:19:14 -0500, Sebastien Bourdelin wrote:
> > BME680 is a pressure/temperature/humidity/voc sensor.
> >
> > Signed-off-by: Sebastien Bourdelin <[email protected]>
> > ---
> > v2 -> v3:
> > - change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <[email protected]>
> > - rebase on master
> > ---
> > .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
> >
>
> Reviewed-by: Rob Herring <[email protected]>

Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.

Thanks,

Jonathan