2019-01-20 07:38:48

by Axel Lin

Subject: [PATCH] regulator: wm831x-dcdc: Convert to use regulator_linear_range for wm831x_buckv

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/wm831x-dcdc.c | 39 ++++++++-------------------------
1 file changed, 9 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 5a5bc4bb08d2..4a573eea284a 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -205,33 +205,10 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
* BUCKV specifics
*/

-static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector <= 0x8)
- return 600000;
- if (selector <= WM831X_BUCKV_MAX_SELECTOR)
- return 600000 + ((selector - 0x8) * 12500);
- return -EINVAL;
-}
-
-static int wm831x_buckv_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- u16 vsel;
-
- if (min_uV < 600000)
- vsel = 0;
- else if (min_uV <= 1800000)
- vsel = DIV_ROUND_UP(min_uV - 600000, 12500) + 8;
- else
- return -EINVAL;
-
- if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
- return -EINVAL;
-
- return vsel;
-}
+static const struct regulator_linear_range wm831x_buckv_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0),
+ REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500),
+};

static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
{
@@ -309,7 +286,7 @@ static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
int vsel;

- vsel = wm831x_buckv_map_voltage(rdev, uV, uV);
+ vsel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (vsel < 0)
return vsel;

@@ -368,8 +345,8 @@ static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
static const struct regulator_ops wm831x_buckv_ops = {
.set_voltage_sel = wm831x_buckv_set_voltage_sel,
.get_voltage_sel = wm831x_buckv_get_voltage_sel,
- .list_voltage = wm831x_buckv_list_voltage,
- .map_voltage = wm831x_buckv_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
.set_current_limit = wm831x_buckv_set_current_limit,
.get_current_limit = wm831x_buckv_get_current_limit,
@@ -492,6 +469,8 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
dcdc->desc.id = id;
dcdc->desc.type = REGULATOR_VOLTAGE;
dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+ dcdc->desc.linear_ranges = wm831x_buckv_ranges;
+ dcdc->desc.n_linear_ranges = ARRAY_SIZE(wm831x_buckv_ranges);
dcdc->desc.ops = &wm831x_buckv_ops;
dcdc->desc.owner = THIS_MODULE;
dcdc->desc.enable_reg = WM831X_DCDC_ENABLE;
--
2.17.1

2019-01-23 11:16:59

by Charles Keepax

Subject: Re: [PATCH] regulator: wm831x-dcdc: Convert to use regulator_linear_range for wm831x_buckv

On Sun, Jan 20, 2019 at 03:33:56PM +0800, Axel Lin wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---

Acked-by: Charles Keepax <[email protected]>

Thanks,
Charles