Wrong polarity of card detect GPIO pin leads to the system not
booting from external mmc, if the back cover of N900 is closed.
When the cover is open the system boots fine.
This wasn't noticed before, because of a bug, which was fixed
by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
CD and WP).
Kernels up to 4.19 ignored the card detect GPIO from DT.
---
arch/arm/boot/dts/omap3-n900.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 182a53991c90..826920e6b878 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -814,7 +814,7 @@
/* For debugging, it is often good idea to remove this GPIO.
It means you can remove back cover (to reboot by removing
battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+ cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
--
2.11.0
Hi,
* Arthur Demchenkov <[email protected]> [190121 03:22]:
> Wrong polarity of card detect GPIO pin leads to the system not
> booting from external mmc, if the back cover of N900 is closed.
> When the cover is open the system boots fine.
>
> This wasn't noticed before, because of a bug, which was fixed
> by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
> CD and WP).
Aaro, does this work for your test case too?
> Kernels up to 4.19 ignored the card detect GPIO from DT.
Hmm so should this have a Fixes tag or not?
Regards,
Tony
> arch/arm/boot/dts/omap3-n900.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 182a53991c90..826920e6b878 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -814,7 +814,7 @@
> /* For debugging, it is often good idea to remove this GPIO.
> It means you can remove back cover (to reboot by removing
> battery) and still use the MMC card. */
> - cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
> + cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
> };
>
> /* most boards use vaux3, only some old versions use vmmc2 instead */
> --
> 2.11.0
>
On Mon, Jan 21, 2019 at 5:43 AM Arthur Demchenkov <[email protected]> wrote:
>
> Wrong polarity of card detect GPIO pin leads to the system not
> booting from external mmc, if the back cover of N900 is closed.
> When the cover is open the system boots fine.
>
> This wasn't noticed before, because of a bug, which was fixed
> by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
> CD and WP).
>
> Kernels up to 4.19 ignored the card detect GPIO from DT.
Signed-off-by tag is missing.
Hi,
On Mon, Jan 21, 2019 at 09:11:01AM -0800, Tony Lindgren wrote:
> * Arthur Demchenkov <[email protected]> [190121 03:22]:
> > Wrong polarity of card detect GPIO pin leads to the system not
> > booting from external mmc, if the back cover of N900 is closed.
> > When the cover is open the system boots fine.
> >
> > This wasn't noticed before, because of a bug, which was fixed
> > by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
> > CD and WP).
>
> Aaro, does this work for your test case too?
Yeah..
> > Kernels up to 4.19 ignored the card detect GPIO from DT.
>
> Hmm so should this have a Fixes tag or not?
I think it should as v4.20 is broken.
A.
> Regards,
>
> Tony
>
> > arch/arm/boot/dts/omap3-n900.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> > index 182a53991c90..826920e6b878 100644
> > --- a/arch/arm/boot/dts/omap3-n900.dts
> > +++ b/arch/arm/boot/dts/omap3-n900.dts
> > @@ -814,7 +814,7 @@
> > /* For debugging, it is often good idea to remove this GPIO.
> > It means you can remove back cover (to reboot by removing
> > battery) and still use the MMC card. */
> > - cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
> > + cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
> > };
> >
> > /* most boards use vaux3, only some old versions use vmmc2 instead */
> > --
> > 2.11.0
> >
* Fabio Estevam <[email protected]> [190121 17:52]:
> On Mon, Jan 21, 2019 at 5:43 AM Arthur Demchenkov <[email protected]> wrote:
> >
> > Wrong polarity of card detect GPIO pin leads to the system not
> > booting from external mmc, if the back cover of N900 is closed.
> > When the cover is open the system boots fine.
> >
> > This wasn't noticed before, because of a bug, which was fixed
> > by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
> > CD and WP).
> >
> > Kernels up to 4.19 ignored the card detect GPIO from DT.
>
> Signed-off-by tag is missing.
Arthur, please reply with your Signed-off-by for this
thread so I can apply it. That is unless you want to
repost the patch for updated comments etc.
Regards,
Tony
Signed-off-by: Arthur Demchenkov <[email protected]>
* Arthur D. <[email protected]> [190122 04:59]:
> Signed-off-by: Arthur Demchenkov <[email protected]>
Thanks applying into omap-for-v5.0/fixes.
Tony