Add the documentation for the Device Tree binding for the layerscape PCIe
controller with EP mode.
Signed-off-by: Xiaowei Bao <[email protected]>
Reviewed-by: Minghuan Lian <[email protected]>
Reviewed-by: Zhiqiang Hou <[email protected]>
---
v2:
- Add the SoC specific compatibles.
v3:
- modify the commit message.
v4:
- no change.
v5:
- no change.
.../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 9b2b8d6..e20ceaa 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -13,6 +13,7 @@ information.
Required properties:
- compatible: should contain the platform identifier such as:
+ RC mode:
"fsl,ls1021a-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
"fsl,ls2088a-pcie"
@@ -20,6 +21,8 @@ Required properties:
"fsl,ls1046a-pcie"
"fsl,ls1043a-pcie"
"fsl,ls1012a-pcie"
+ EP mode:
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
--
1.7.1
Add the PCIE EP node in dts for ls1046a.
Signed-off-by: Xiaowei Bao <[email protected]>
Reviewed-by: Minghuan Lian <[email protected]>
Reviewed-by: Zhiqiang Hou <[email protected]>
---
v2:
- Add the SoC specific compatibles.
v3:
- no change
v4:
- no change
v5:
- change the OB win number due to the RM update.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 34 +++++++++++++++++++++++-
1 files changed, 33 insertions(+), 1 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0e762ca..cb71850 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -666,6 +666,17 @@
status = "disabled";
};
+ pcie_ep@3400000 {
+ compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x40 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ num-lanes = <2>;
+ status = "disabled";
+ };
+
pcie@3500000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
@@ -693,6 +704,17 @@
status = "disabled";
};
+ pcie_ep@3500000 {
+ compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x48 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ num-lanes = <2>;
+ status = "disabled";
+ };
+
pcie@3600000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
@@ -720,6 +742,17 @@
status = "disabled";
};
+ pcie_ep@3600000 {
+ compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+ reg = <0x00 0x03600000 0x0 0x00100000
+ 0x50 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ num-lanes = <2>;
+ status = "disabled";
+ };
+
qdma: dma-controller@8380000 {
compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
@@ -740,7 +773,6 @@
queue-sizes = <64 64>;
big-endian;
};
-
};
reserved-memory {
--
1.7.1
Add the PCIe EP mode support for layerscape platform.
Signed-off-by: Xiaowei Bao <[email protected]>
Reviewed-by: Minghuan Lian <[email protected]>
Reviewed-by: Zhiqiang Hou <[email protected]>
---
v2:
- remove the EP mode check function.
v3:
- modif the return value when enter default case.
v4:
- no change.
v5:
- no change.
drivers/pci/controller/dwc/Makefile | 2 +-
drivers/pci/controller/dwc/pci-layerscape-ep.c | 146 ++++++++++++++++++++++++
2 files changed, 147 insertions(+), 1 deletions(-)
create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 7bcdcdf..b5f3b83 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
new file mode 100644
index 0000000..dafb528
--- /dev/null
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe controller EP driver for Freescale Layerscape SoCs
+ *
+ * Copyright (C) 2018 NXP Semiconductor.
+ *
+ * Author: Xiaowei Bao <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+
+#include "pcie-designware.h"
+
+#define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/
+
+struct ls_pcie_ep {
+ struct dw_pcie *pci;
+};
+
+#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
+
+static int ls_pcie_establish_link(struct dw_pcie *pci)
+{
+ return 0;
+}
+
+static const struct dw_pcie_ops ls_pcie_ep_ops = {
+ .start_link = ls_pcie_establish_link,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+ { .compatible = "fsl,ls-pcie-ep",},
+ { },
+};
+
+static void ls_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct pci_epc *epc = ep->epc;
+ enum pci_barno bar;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);
+
+ epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER;
+}
+
+static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+ enum pci_epc_irq_type type, u16 interrupt_num)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ switch (type) {
+ case PCI_EPC_IRQ_LEGACY:
+ return dw_pcie_ep_raise_legacy_irq(ep, func_no);
+ case PCI_EPC_IRQ_MSI:
+ return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+ case PCI_EPC_IRQ_MSIX:
+ return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
+ default:
+ dev_err(pci->dev, "UNKNOWN IRQ type\n");
+ return -EINVAL;
+ }
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+ .ep_init = ls_pcie_ep_init,
+ .raise_irq = ls_pcie_ep_raise_irq,
+};
+
+static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
+ struct platform_device *pdev)
+{
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+ struct dw_pcie_ep *ep;
+ struct resource *res;
+ int ret;
+
+ ep = &pci->ep;
+ ep->ops = &pcie_ep_ops;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+ if (!res)
+ return -EINVAL;
+
+ ep->phys_base = res->start;
+ ep->addr_size = resource_size(res);
+
+ ret = dw_pcie_ep_init(ep);
+ if (ret) {
+ dev_err(dev, "failed to initialize endpoint\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init ls_pcie_ep_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dw_pcie *pci;
+ struct ls_pcie_ep *pcie;
+ struct resource *dbi_base;
+ int ret;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+ if (!pci)
+ return -ENOMEM;
+
+ dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+ if (IS_ERR(pci->dbi_base))
+ return PTR_ERR(pci->dbi_base);
+
+ pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+ pci->dev = dev;
+ pci->ops = &ls_pcie_ep_ops;
+ pcie->pci = pci;
+
+ platform_set_drvdata(pdev, pcie);
+
+ ret = ls_add_pcie_ep(pcie, pdev);
+
+ return ret;
+}
+
+static struct platform_driver ls_pcie_ep_driver = {
+ .driver = {
+ .name = "layerscape-pcie-ep",
+ .of_match_table = ls_pcie_ep_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
--
1.7.1
Add the layerscape EP device support in pci_endpoint_test driver.
Signed-off-by: Xiaowei Bao <[email protected]>
Reviewed-by: Minghuan Lian <[email protected]>
Reviewed-by: Zhiqiang Hou <[email protected]>
Reviewed-by: Greg KH <[email protected]>
---
v2:
- no change
v3:
- no change
v4:
- delate the comments.
v5:
- no change.
drivers/misc/pci_endpoint_test.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 896e2df..29582fe 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -788,6 +788,7 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev)
static const struct pci_device_id pci_endpoint_test_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+ { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, 0xedda) },
{ }
};
--
1.7.1
Hi Xiaowei,
On 21/01/19 3:14 PM, Xiaowei Bao wrote:
> Add the PCIe EP mode support for layerscape platform.
>
> Signed-off-by: Xiaowei Bao <[email protected]>
> Reviewed-by: Minghuan Lian <[email protected]>
> Reviewed-by: Zhiqiang Hou <[email protected]>
This patch looks good to me, except for using epc->features which I've tried to
get rid of in [1]. After Lorenzo's review, one of us have to change it to the
new design.
Thanks
Kishon
[1] -> https://patchwork.kernel.org/project/linux-pci/list/?series=66177
> ---
> v2:
> - remove the EP mode check function.
> v3:
> - modif the return value when enter default case.
> v4:
> - no change.
> v5:
> - no change.
>
> drivers/pci/controller/dwc/Makefile | 2 +-
> drivers/pci/controller/dwc/pci-layerscape-ep.c | 146 ++++++++++++++++++++++++
> 2 files changed, 147 insertions(+), 1 deletions(-)
> create mode 100644 drivers/pci/controller/dwc/pci-layerscape-ep.c
>
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 7bcdcdf..b5f3b83 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,7 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> new file mode 100644
> index 0000000..dafb528
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe controller EP driver for Freescale Layerscape SoCs
> + *
> + * Copyright (C) 2018 NXP Semiconductor.
> + *
> + * Author: Xiaowei Bao <[email protected]>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +
> +#include "pcie-designware.h"
> +
> +#define PCIE_DBI2_OFFSET 0x1000 /* DBI2 base address*/
> +
> +struct ls_pcie_ep {
> + struct dw_pcie *pci;
> +};
> +
> +#define to_ls_pcie_ep(x) dev_get_drvdata((x)->dev)
> +
> +static int ls_pcie_establish_link(struct dw_pcie *pci)
> +{
> + return 0;
> +}
> +
> +static const struct dw_pcie_ops ls_pcie_ep_ops = {
> + .start_link = ls_pcie_establish_link,
> +};
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> + { .compatible = "fsl,ls-pcie-ep",},
> + { },
> +};
> +
> +static void ls_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + struct pci_epc *epc = ep->epc;
> + enum pci_barno bar;
> +
> + for (bar = BAR_0; bar <= BAR_5; bar++)
> + dw_pcie_ep_reset_bar(pci, bar);
> +
> + epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER;
> +}
> +
> +static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> + enum pci_epc_irq_type type, u16 interrupt_num)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> + switch (type) {
> + case PCI_EPC_IRQ_LEGACY:
> + return dw_pcie_ep_raise_legacy_irq(ep, func_no);
> + case PCI_EPC_IRQ_MSI:
> + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> + case PCI_EPC_IRQ_MSIX:
> + return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> + default:
> + dev_err(pci->dev, "UNKNOWN IRQ type\n");
> + return -EINVAL;
> + }
> +}
> +
> +static struct dw_pcie_ep_ops pcie_ep_ops = {
> + .ep_init = ls_pcie_ep_init,
> + .raise_irq = ls_pcie_ep_raise_irq,
> +};
> +
> +static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + struct device *dev = pci->dev;
> + struct dw_pcie_ep *ep;
> + struct resource *res;
> + int ret;
> +
> + ep = &pci->ep;
> + ep->ops = &pcie_ep_ops;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> + if (!res)
> + return -EINVAL;
> +
> + ep->phys_base = res->start;
> + ep->addr_size = resource_size(res);
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret) {
> + dev_err(dev, "failed to initialize endpoint\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct dw_pcie *pci;
> + struct ls_pcie_ep *pcie;
> + struct resource *dbi_base;
> + int ret;
> +
> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> + if (!pci)
> + return -ENOMEM;
> +
> + dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> + pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> + if (IS_ERR(pci->dbi_base))
> + return PTR_ERR(pci->dbi_base);
> +
> + pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> + pci->dev = dev;
> + pci->ops = &ls_pcie_ep_ops;
> + pcie->pci = pci;
> +
> + platform_set_drvdata(pdev, pcie);
> +
> + ret = ls_add_pcie_ep(pcie, pdev);
> +
> + return ret;
> +}
> +
> +static struct platform_driver ls_pcie_ep_driver = {
> + .driver = {
> + .name = "layerscape-pcie-ep",
> + .of_match_table = ls_pcie_ep_of_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver_probe(ls_pcie_ep_driver, ls_pcie_ep_probe);
>
On Mon, Jan 21, 2019 at 05:44:57PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape PCIe
> controller with EP mode.
>
> Signed-off-by: Xiaowei Bao <[email protected]>
> Reviewed-by: Minghuan Lian <[email protected]>
> Reviewed-by: Zhiqiang Hou <[email protected]>
> ---
> v2:
> - Add the SoC specific compatibles.
> v3:
> - modify the commit message.
> v4:
> - no change.
> v5:
> - no change.
Still missing my R-by tag from v3.
>
> .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
Rob,
Is it OK for you if I pull this series into the pci tree ?
Please let me know, thanks.
Lorenzo
On Mon, Jan 21, 2019 at 05:44:57PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape PCIe
> controller with EP mode.
>
> Signed-off-by: Xiaowei Bao <[email protected]>
> Reviewed-by: Minghuan Lian <[email protected]>
> Reviewed-by: Zhiqiang Hou <[email protected]>
> ---
> v2:
> - Add the SoC specific compatibles.
> v3:
> - modify the commit message.
> v4:
> - no change.
> v5:
> - no change.
>
> .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>
> Required properties:
> - compatible: should contain the platform identifier such as:
> + RC mode:
> "fsl,ls1021a-pcie"
> "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
> "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
> "fsl,ls1046a-pcie"
> "fsl,ls1043a-pcie"
> "fsl,ls1012a-pcie"
> + EP mode:
> + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> - reg: base addresses and lengths of the PCIe controller register blocks.
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> --
> 1.7.1
>