2019-01-24 08:29:56

by Jan Kiszka

[permalink] [raw]
Subject: [PATCH v2] arm64: dts: zcu100-revC: Give wifi some time after power-on

From: Jan Kiszka <[email protected]>

Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
---

Changes in v2:
- fix changelog

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 13a0a028df98..e5699d0d91e4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -101,6 +101,7 @@
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ post-power-on-delay-ms = <10>;
};
};

--
2.16.4


2019-01-24 15:30:03

by Tony Lindgren

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: zcu100-revC: Give wifi some time after power-on

* Jan Kiszka <[email protected]> [190124 08:29]:
> From: Jan Kiszka <[email protected]>
>
> Somewhere along recent changes to power control of the wl1831, power-on
> became very unreliable on the Ultra96, failing like this:
>
> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
>
> After playing with some dt parameters and comparing to other users of
> this chip, it turned out we need some power-on delay to make things
> stable again. In contrast to those other users which define 200 ms,
> Ultra96 is already happy with 10 ms.

Good to hear this got sorted out, thanks everybody.

Acked-by: Tony Lindgren <[email protected]>

2019-01-25 12:40:04

by Michal Simek

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: zcu100-revC: Give wifi some time after power-on

On 24. 01. 19 9:28, Jan Kiszka wrote:
> From: Jan Kiszka <[email protected]>
>
> Somewhere along recent changes to power control of the wl1831, power-on
> became very unreliable on the Ultra96, failing like this:
>
> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
>
> After playing with some dt parameters and comparing to other users of
> this chip, it turned out we need some power-on delay to make things
> stable again. In contrast to those other users which define 200 ms,
> Ultra96 is already happy with 10 ms.
>
> Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
> Signed-off-by: Jan Kiszka <[email protected]>
> Acked-by: Ulf Hansson <[email protected]>
> ---
>
> Changes in v2:
> - fix changelog
>
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> index 13a0a028df98..e5699d0d91e4 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> @@ -101,6 +101,7 @@
> sdio_pwrseq: sdio-pwrseq {
> compatible = "mmc-pwrseq-simple";
> reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
> + post-power-on-delay-ms = <10>;
> };
> };
>
> --
> 2.16.4
>

Applied.

Thanks,
Michal