Memory-region and flash phandle is not a required parameter, it is
optional to describe in device tree and needed only use basis.
Signed-off-by: Vijay Khemka <[email protected]>
---
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index 34dd89087cff..86446074e206 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -135,6 +135,8 @@ Required properties:
- clocks: contains a phandle to the syscon node describing the clocks.
There should then be one cell representing the clock to use
+Optional properties:
+
- memory-region: A phandle to a reserved_memory region to be used for the LPC
to AHB mapping
--
2.17.1
On Wed, 30 Jan 2019 at 10:05, Vijay Khemka <[email protected]> wrote:
>
> Memory-region and flash phandle is not a required parameter, it is
> optional to describe in device tree and needed only use basis.
>
> Signed-off-by: Vijay Khemka <[email protected]>
Acked-by: Joel Stanley <[email protected]>
Thanks for following this up Vijay.
On Tue, 29 Jan 2019, Vijay Khemka wrote:
> Memory-region and flash phandle is not a required parameter, it is
> optional to describe in device tree and needed only use basis.
>
> Signed-off-by: Vijay Khemka <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 2 ++
> 1 file changed, 2 insertions(+)
Applied, thanks.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog