Softly reset registers values on module probe
Signed-off-by: Kirill Marinushkin <[email protected]>
---
sound/soc/codecs/pcm3060.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c
index 6714aa8d9026..543cb86fd764 100644
--- a/sound/soc/codecs/pcm3060.c
+++ b/sound/soc/codecs/pcm3060.c
@@ -287,6 +287,14 @@ int pcm3060_probe(struct device *dev)
int rc;
struct pcm3060_priv *priv = dev_get_drvdata(dev);
+ /* soft reset */
+ rc = regmap_update_bits(priv->regmap, PCM3060_REG64,
+ PCM3060_REG_MRST, 0);
+ if (rc) {
+ dev_err(dev, "failed to reset component, rc=%d\n", rc);
+ return rc;
+ }
+
if (dev->of_node)
pcm3060_parse_dt(dev->of_node, priv);
--
2.13.6
ADC and DAC can be clocked from separate or same sources CLK1 and CLK2.
By default, ADC is clocked from CLK1, and DAC - from CLK2.
This commits allows sound cards to selest a proper clock source during
`hw_params()` via `snd_soc_dai_set_sysclk()`. It makes possible to have a
single clock source for both ADC and DAC.
Signed-off-by: Kirill Marinushkin <[email protected]>
---
sound/soc/codecs/pcm3060.c | 27 +++++++++++++++++++++++++++
sound/soc/codecs/pcm3060.h | 5 +++++
2 files changed, 32 insertions(+)
diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c
index 543cb86fd764..32b26f1c2282 100644
--- a/sound/soc/codecs/pcm3060.c
+++ b/sound/soc/codecs/pcm3060.c
@@ -18,12 +18,39 @@ static int pcm3060_set_sysclk(struct snd_soc_dai *dai, int clk_id,
{
struct snd_soc_component *comp = dai->component;
struct pcm3060_priv *priv = snd_soc_component_get_drvdata(comp);
+ unsigned int reg;
+ unsigned int val;
if (dir != SND_SOC_CLOCK_IN) {
dev_err(comp->dev, "unsupported sysclock dir: %d\n", dir);
return -EINVAL;
}
+ switch (clk_id) {
+ case PCM3060_CLK_DEF:
+ val = 0;
+ break;
+
+ case PCM3060_CLK1:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? PCM3060_REG_CSEL : 0);
+ break;
+
+ case PCM3060_CLK2:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? 0 : PCM3060_REG_CSEL);
+ break;
+
+ default:
+ dev_err(comp->dev, "unsupported sysclock id: %d\n", clk_id);
+ return -EINVAL;
+ }
+
+ if (dai->id == PCM3060_DAI_ID_DAC)
+ reg = PCM3060_REG67;
+ else
+ reg = PCM3060_REG72;
+
+ regmap_update_bits(priv->regmap, reg, PCM3060_REG_CSEL, val);
+
priv->dai[dai->id].sclk_freq = freq;
return 0;
diff --git a/sound/soc/codecs/pcm3060.h b/sound/soc/codecs/pcm3060.h
index 6a027b4a845d..75931c9a9d85 100644
--- a/sound/soc/codecs/pcm3060.h
+++ b/sound/soc/codecs/pcm3060.h
@@ -17,6 +17,11 @@ extern const struct regmap_config pcm3060_regmap;
#define PCM3060_DAI_ID_ADC 1
#define PCM3060_DAI_IDS_NUM 2
+/* ADC and DAC can be clocked from separate or same sources CLK1 and CLK2 */
+#define PCM3060_CLK_DEF 0 /* default: CLK1->ADC, CLK2->DAC */
+#define PCM3060_CLK1 1
+#define PCM3060_CLK2 2
+
struct pcm3060_priv_dai {
bool is_master;
unsigned int sclk_freq;
--
2.13.6
The patch
ASoC: pcm3060: Add soft reset on probe
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From a3daee085905e97ba20e6b9e72e6639fa518209c Mon Sep 17 00:00:00 2001
From: Kirill Marinushkin <[email protected]>
Date: Mon, 11 Feb 2019 07:08:38 +0100
Subject: [PATCH] ASoC: pcm3060: Add soft reset on probe
Softly reset registers values on module probe
Signed-off-by: Kirill Marinushkin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/pcm3060.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c
index 6714aa8d9026..543cb86fd764 100644
--- a/sound/soc/codecs/pcm3060.c
+++ b/sound/soc/codecs/pcm3060.c
@@ -287,6 +287,14 @@ int pcm3060_probe(struct device *dev)
int rc;
struct pcm3060_priv *priv = dev_get_drvdata(dev);
+ /* soft reset */
+ rc = regmap_update_bits(priv->regmap, PCM3060_REG64,
+ PCM3060_REG_MRST, 0);
+ if (rc) {
+ dev_err(dev, "failed to reset component, rc=%d\n", rc);
+ return rc;
+ }
+
if (dev->of_node)
pcm3060_parse_dt(dev->of_node, priv);
--
2.20.1
The patch
ASoC: pcm3060: Add clock select
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 1e61405e201515d5767106babb4d750661ba5dcd Mon Sep 17 00:00:00 2001
From: Kirill Marinushkin <[email protected]>
Date: Mon, 11 Feb 2019 07:08:39 +0100
Subject: [PATCH] ASoC: pcm3060: Add clock select
ADC and DAC can be clocked from separate or same sources CLK1 and CLK2.
By default, ADC is clocked from CLK1, and DAC - from CLK2.
This commits allows sound cards to selest a proper clock source during
`hw_params()` via `snd_soc_dai_set_sysclk()`. It makes possible to have a
single clock source for both ADC and DAC.
Signed-off-by: Kirill Marinushkin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/codecs/pcm3060.c | 27 +++++++++++++++++++++++++++
sound/soc/codecs/pcm3060.h | 5 +++++
2 files changed, 32 insertions(+)
diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c
index 543cb86fd764..32b26f1c2282 100644
--- a/sound/soc/codecs/pcm3060.c
+++ b/sound/soc/codecs/pcm3060.c
@@ -18,12 +18,39 @@ static int pcm3060_set_sysclk(struct snd_soc_dai *dai, int clk_id,
{
struct snd_soc_component *comp = dai->component;
struct pcm3060_priv *priv = snd_soc_component_get_drvdata(comp);
+ unsigned int reg;
+ unsigned int val;
if (dir != SND_SOC_CLOCK_IN) {
dev_err(comp->dev, "unsupported sysclock dir: %d\n", dir);
return -EINVAL;
}
+ switch (clk_id) {
+ case PCM3060_CLK_DEF:
+ val = 0;
+ break;
+
+ case PCM3060_CLK1:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? PCM3060_REG_CSEL : 0);
+ break;
+
+ case PCM3060_CLK2:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? 0 : PCM3060_REG_CSEL);
+ break;
+
+ default:
+ dev_err(comp->dev, "unsupported sysclock id: %d\n", clk_id);
+ return -EINVAL;
+ }
+
+ if (dai->id == PCM3060_DAI_ID_DAC)
+ reg = PCM3060_REG67;
+ else
+ reg = PCM3060_REG72;
+
+ regmap_update_bits(priv->regmap, reg, PCM3060_REG_CSEL, val);
+
priv->dai[dai->id].sclk_freq = freq;
return 0;
diff --git a/sound/soc/codecs/pcm3060.h b/sound/soc/codecs/pcm3060.h
index 6a027b4a845d..75931c9a9d85 100644
--- a/sound/soc/codecs/pcm3060.h
+++ b/sound/soc/codecs/pcm3060.h
@@ -17,6 +17,11 @@ extern const struct regmap_config pcm3060_regmap;
#define PCM3060_DAI_ID_ADC 1
#define PCM3060_DAI_IDS_NUM 2
+/* ADC and DAC can be clocked from separate or same sources CLK1 and CLK2 */
+#define PCM3060_CLK_DEF 0 /* default: CLK1->ADC, CLK2->DAC */
+#define PCM3060_CLK1 1
+#define PCM3060_CLK2 2
+
struct pcm3060_priv_dai {
bool is_master;
unsigned int sclk_freq;
--
2.20.1