For internal cmds, we will unmap DMA memory associated with the cmd
before we abort the cmd. If DMA transferring data before the aborting,
bus error will occur.
ata_exec_internal_sg
->ata_port_freeze if timeout
->ata_qc_complete
->ata_sg_clean
dma transferring data = bus error
->ap->ops->post_internal_cmd
->sas_ata_post_internal
->sas_ata_internal_abort
->abort the cmd
Fix this by moving post_internal_cmd() before unmapping the DMA memory
when time out. Notice that we have to set ATA_QCFLAG_FAILED flag before
calling post_internal_cmd() so that the aborting will work.
Reported-by: luojian <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
---
v2: fix some typos
drivers/ata/libata-core.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index adf28788cab5..d0ff5711e805 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1665,6 +1665,13 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
*/
if (qc->flags & ATA_QCFLAG_ACTIVE) {
qc->err_mask |= AC_ERR_TIMEOUT;
+ qc->flags |= ATA_QCFLAG_FAILED;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ /* do post_internal_cmd */
+ if (ap->ops->post_internal_cmd)
+ ap->ops->post_internal_cmd(qc);
+ spin_lock_irqsave(ap->lock, flags);
if (ap->ops->error_handler)
ata_port_freeze(ap);
@@ -1679,9 +1686,10 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
spin_unlock_irqrestore(ap->lock, flags);
}
- /* do post_internal_cmd */
- if (ap->ops->post_internal_cmd)
- ap->ops->post_internal_cmd(qc);
+ if (!(qc->err_mask & AC_ERR_TIMEOUT))
+ /* do post_internal_cmd */
+ if (ap->ops->post_internal_cmd)
+ ap->ops->post_internal_cmd(qc);
/* perform minimal error analysis */
if (qc->flags & ATA_QCFLAG_FAILED) {
--
2.14.4