For Spreadtrum DMA engine, all channels are equal, which means slave can
request any channels with setting a unique slave id to trigger this channel.
Thus we can remove the channel id from device tree to assign the channel
dynamically, moreover we should add the slave id in device tree.
Signed-off-by: Baolin Wang <[email protected]>
---
Changes from v1:
- Remove channel id from DT.
---
Documentation/devicetree/bindings/dma/sprd-dma.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
index 7a10fea..adccea994 100644
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -31,7 +31,7 @@ DMA clients connected to the Spreadtrum DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel.
The two cells in order are:
1. A phandle pointing to the DMA controller.
-2. The channel id.
+2. The slave id.
spi0: spi@70a00000{
...
--
1.7.9.5
We will describe the slave id in DMA cell specifier instead of DMA channel
id, thus we should save the slave id from DMA engine translation function,
and remove the channel id validation.
Meanwhile we do not need set default slave id in sprd_dma_alloc_chan_resources(),
remove it.
Signed-off-by: Baolin Wang <[email protected]>
---
Changes from v1:
- Remove channel id from DT.
---
drivers/dma/sprd-dma.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index e2f0167..48431e2 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -580,15 +580,7 @@ static irqreturn_t dma_irq_handle(int irq, void *dev_id)
static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
{
- struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
- int ret;
-
- ret = pm_runtime_get_sync(chan->device->dev);
- if (ret < 0)
- return ret;
-
- schan->dev_id = SPRD_DMA_SOFTWARE_UID;
- return 0;
+ return pm_runtime_get_sync(chan->device->dev);
}
static void sprd_dma_free_chan_resources(struct dma_chan *chan)
@@ -1021,13 +1013,10 @@ static void sprd_dma_free_desc(struct virt_dma_desc *vd)
static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
- struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
- u32 req = *(u32 *)param;
+ u32 slave_id = *(u32 *)param;
- if (req < sdev->total_chns)
- return req == schan->chn_num + 1;
- else
- return false;
+ schan->dev_id = slave_id;
+ return true;
}
static int sprd_dma_probe(struct platform_device *pdev)
--
1.7.9.5
On Thu, 21 Feb 2019 13:34:40 +0800, Baolin Wang wrote:
> For Spreadtrum DMA engine, all channels are equal, which means slave can
> request any channels with setting a unique slave id to trigger this channel.
>
> Thus we can remove the channel id from device tree to assign the channel
> dynamically, moreover we should add the slave id in device tree.
>
> Signed-off-by: Baolin Wang <[email protected]>
> ---
> Changes from v1:
> - Remove channel id from DT.
> ---
> Documentation/devicetree/bindings/dma/sprd-dma.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <[email protected]>
On 21-02-19, 13:34, Baolin Wang wrote:
> For Spreadtrum DMA engine, all channels are equal, which means slave can
> request any channels with setting a unique slave id to trigger this channel.
>
> Thus we can remove the channel id from device tree to assign the channel
> dynamically, moreover we should add the slave id in device tree.
Applied, thanks
--
~Vinod