2019-03-01 08:16:50

by Alison Wang

[permalink] [raw]
Subject: [PATCH v3] arm64: dts: ls1028a: Add Audio DT nodes

This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.

Signed-off-by: Alison Wang <[email protected]>
---
Changes in v3:
- Sort EDMA node in unit-address.

Changes in v2:
- Modify some nodes' names.
- Use GIC_SPI and IRQ_TYPE_LEVEL_HIGH.

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 63 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 57 +++++++++++++++++++
3 files changed, 182 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 14c79f4..b359068 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -32,6 +32,49 @@
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x00000000>;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
};

&duart0 {
@@ -89,5 +132,24 @@
reg = <0x57>;
};
};
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ sgtl5000: audio-codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ };
+ };
};
};
+
+&sai1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index fdeb417..50ca51a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -28,6 +28,49 @@
device_type = "memory";
reg = <0x0 0x80000000 0x1 0x0000000>;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai4>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
};

&i2c0 {
@@ -39,6 +82,22 @@
#address-cells = <1>;
#size-cells = <0>;

+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ sgtl5000: audio-codec@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ sclk-strength = <3>;
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -71,3 +130,7 @@
&duart1 {
status = "okay";
};
+
+&sai4 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 36ef9c5..c085833 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -240,6 +240,21 @@
status = "disabled";
};

+ edma0: dma-controller@22c0000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x22c0000 0x0 0x10000>,
+ <0x0 0x22d0000 0x0 0x10000>,
+ <0x0 0x22e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clockgen 4 1>,
+ <&clockgen 4 1>;
+ };
+
gpio1: gpio@2300000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
@@ -340,5 +355,47 @@
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ sai1: audio-controller@f100000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 4>,
+ <&edma0 1 3>;
+ status = "disabled";
+ };
+
+ sai2: audio-controller@f110000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 6>,
+ <&edma0 1 5>;
+ status = "disabled";
+ };
+
+ sai4: audio-controller@f130000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf130000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 10>,
+ <&edma0 1 9>;
+ status = "disabled";
+ };
};
};
--
1.7.1



2019-03-04 05:37:38

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v3] arm64: dts: ls1028a: Add Audio DT nodes

On Fri, Mar 01, 2019 at 03:46:32PM +0800, Alison Wang wrote:
> This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
>
> Signed-off-by: Alison Wang <[email protected]>

Applied, thanks.