Use rgmii-id phy mode for the CPU port (MAC0) of the QCA8334 switch
to add delays to both Tx and Rx clock.
It worked with the rgmii mode before because the qca8k driver
(incorrectly) enabled delays in that mode and rgmii-id was not
implemented at all.
Commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode")
removed the delays from the RGMII mode and hence broke the networking.
To fix the problem, commit a968b5e9d587 ("net: dsa: qca8k: Enable delay
for RGMII_ID mode") was introduced.
Now the correct phy mode is available so use it.
Signed-off-by: Michal Vokáč <[email protected]>
---
Changes in v2:
- Reworded commit message - added more details regarding the issue.
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index b715ab0fa1ff..091d829f6b05 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -125,7 +125,7 @@
ethphy0: port@0 {
reg = <0>;
label = "cpu";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
ethernet = <&fec>;
fixed-link {
--
2.1.4
On Fri, Mar 01, 2019 at 08:26:42AM +0100, Michal Vokáč wrote:
> Use rgmii-id phy mode for the CPU port (MAC0) of the QCA8334 switch
> to add delays to both Tx and Rx clock.
>
> It worked with the rgmii mode before because the qca8k driver
> (incorrectly) enabled delays in that mode and rgmii-id was not
> implemented at all.
>
> Commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode")
> removed the delays from the RGMII mode and hence broke the networking.
>
> To fix the problem, commit a968b5e9d587 ("net: dsa: qca8k: Enable delay
> for RGMII_ID mode") was introduced.
>
> Now the correct phy mode is available so use it.
>
> Signed-off-by: Michal Vokáč <[email protected]>
Applied, thanks.