This is the start of the stable review cycle for the 4.9.162 release.
There are 32 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Mar 6 08:15:49 UTC 2019.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.162-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.162-rc1
Andy Lutomirski <[email protected]>
x86/uaccess: Don't leak the AC flag into __put_user() value evaluation
Jann Horn <[email protected]>
mm: enforce min addr even if capable() in expand_downwards()
Jonathan Neuschäfer <[email protected]>
mmc: spi: Fix card detection during probe
Seth Forshee <[email protected]>
powerpc: Always initialize input array when calling epapr_hypercall()
Vitaly Kuznetsov <[email protected]>
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
Suravee Suthikulpanit <[email protected]>
svm: Fix AVIC incomplete IPI emulation
Chaitanya Tata <[email protected]>
cfg80211: extend range deviation for DMG
Mathieu Malaterre <[email protected]>
mac80211: Add attribute aligned(2) to struct 'action'
Balaji Pothunoori <[email protected]>
mac80211: don't initiate TDLS connection if station is not associated to AP
Thomas Falcon <[email protected]>
ibmveth: Do not process frames after calling napi_reschedule
Zhang Run <[email protected]>
net: usb: asix: ax88772_bind return error when hw_reset fail
Atsushi Nemoto <[email protected]>
net: altera_tse: fix connect_local_phy error path
Varun Prakash <[email protected]>
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
Ernesto A. Fernández <[email protected]>
direct-io: allow direct writes to empty inodes
Tomonori Sakita <[email protected]>
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
Xie Yongji <[email protected]>
locking/rwsem: Fix (possible) missed wakeup
Bob Copeland <[email protected]>
mac80211: fix miscounting of ttl-dropped frames
Aaron Hill <[email protected]>
drivers: thermal: int340x_thermal: Fix sysfs race condition
Eugeniy Paltsev <[email protected]>
ARC: fix __ffs return value to avoid build warnings
Silvio Cesare <[email protected]>
ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
Silvio Cesare <[email protected]>
ASoC: dapm: change snprintf to scnprintf for possible overflow
Dan Carpenter <[email protected]>
usb: gadget: Potential NULL dereference on allocation error
Zeng Tao <[email protected]>
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
Bo He <[email protected]>
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
Dan Carpenter <[email protected]>
thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
Dan Carpenter <[email protected]>
ALSA: compress: prevent potential divide by zero bugs
Rander Wang <[email protected]>
ASoC: Intel: Haswell/Broadwell: fix setting for .dynamic field
Kristian H. Kristensen <[email protected]>
drm/msm: Unblock writer if reader closes file
John Garry <[email protected]>
scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
Greg Kroah-Hartman <[email protected]>
Revert "loop: Fold __loop_release into loop_release"
Greg Kroah-Hartman <[email protected]>
Revert "loop: Get rid of loop_index_mutex"
Greg Kroah-Hartman <[email protected]>
Revert "loop: Fix double mutex_unlock(&loop_ctl_mutex) in loop_control_ioctl()"
-------------
Diffstat:
Makefile | 4 +-
arch/arc/include/asm/bitops.h | 6 +--
arch/powerpc/include/asm/epapr_hcalls.h | 12 +++---
arch/x86/include/asm/uaccess.h | 7 ++--
arch/x86/kvm/svm.c | 27 ++++++-------
drivers/block/loop.c | 47 ++++++++++++----------
drivers/gpu/drm/msm/msm_rd.c | 7 +++-
drivers/mmc/host/mmc_spi.c | 1 +
drivers/net/ethernet/altera/altera_tse_main.c | 4 +-
drivers/net/ethernet/ibm/ibmveth.c | 2 -
drivers/net/usb/asix_devices.c | 9 ++++-
drivers/scsi/csiostor/csio_attr.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 2 +
.../int340x_thermal/processor_thermal_device.c | 30 +++++++-------
drivers/tty/serial/fsl_lpuart.c | 2 +-
drivers/usb/dwc3/gadget.c | 3 ++
drivers/usb/gadget/function/f_sourcesink.c | 2 +-
fs/direct-io.c | 5 ++-
kernel/locking/rwsem-xadd.c | 11 ++++-
mm/mmap.c | 7 ++--
net/mac80211/cfg.c | 4 ++
net/mac80211/rx.c | 6 ++-
net/wireless/reg.c | 4 +-
sound/core/compress_offload.c | 3 +-
sound/soc/fsl/imx-audmux.c | 24 +++++------
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
sound/soc/soc-dapm.c | 10 ++---
28 files changed, 139 insertions(+), 106 deletions(-)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 5d3cf50105d007adc54949e0caeca1e944549723 which is
commit 628bd85947091830a8c4872adfd5ed1d515a9cf2 upstream.
It does not work properly in the 4.9.y tree and causes more problems
than it fixes, so revert it.
Reported-by: Thomas Lindroth <[email protected]>
Reported-by: Jan Kara <[email protected]>
Cc: syzbot <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/loop.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1929,10 +1929,12 @@ static long loop_control_ioctl(struct fi
break;
if (lo->lo_state != Lo_unbound) {
ret = -EBUSY;
+ mutex_unlock(&loop_ctl_mutex);
break;
}
if (atomic_read(&lo->lo_refcnt) > 0) {
ret = -EBUSY;
+ mutex_unlock(&loop_ctl_mutex);
break;
}
lo->lo_disk->private_data = NULL;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ]
Currently the link_state is uninitialized and the default value is 0(U0)
before the first time we start the udc, and after we start the udc then
stop the udc, the link_state will be undefined.
We may have the following warnings if we start the udc again with
an undefined link_state:
WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308
dwc3 100e0000.hidwc3_0: wakeup failed --> -22
[...]
Call Trace:
[<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14)
[<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98)
[<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100)
[<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48)
[<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308)
[<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4)
[<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80)
[<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278)
[<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c)
[<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc)
[<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140)
[<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite])
[<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160)
[<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114)
[<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168)
[<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90)
[<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Zeng Tao <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c481df18a5a1d..712bd450f8573 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1705,6 +1705,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
/* begin to receive SETUP packets */
dwc->ep0state = EP0_SETUP_PHASE;
+ dwc->link_state = DWC3_LINK_STATE_SS_DIS;
dwc3_ep0_out_start(dwc);
dwc3_gadget_enable_irq(dwc);
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e581e151e965bf1f2815dd94620b638fec4d0a7e ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-dapm.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 8bfc534e3b342..ab647f1fe11bd 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1976,19 +1976,19 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
out = is_connected_output_ep(w, NULL, NULL);
}
- ret = snprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
+ ret = scnprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
w->name, w->power ? "On" : "Off",
w->force ? " (forced)" : "", in, out);
if (w->reg >= 0)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" - R%d(0x%x) mask 0x%x",
w->reg, w->reg, w->mask << w->shift);
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (w->sname)
- ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
w->sname,
w->active ? "active" : "inactive");
@@ -2001,7 +2001,7 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
if (!p->connect)
continue;
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" %s \"%s\" \"%s\"\n",
(rdir == SND_SOC_DAPM_DIR_IN) ? "in" : "out",
p->name ? p->name : "static",
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ]
Changes since V1:
* Use dev_info instead of printk
* Use dev_warn instead of BUG_ON
Previously, sysfs_create_group was called before all initialization had
fully run - specifically, before pci_set_drvdata was called. Since the
sysctl group is visible to userspace as soon as sysfs_create_group
returns, a small window of time existed during which a process could read
from an uninitialized/partially-initialized device.
This commit moves the creation of the sysctl group to after all
initialized is completed. This ensures that it's impossible for
userspace to read from a sysctl file before initialization has fully
completed.
To catch any future regressions, I've added a check to ensure
that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process
tries to read from a sysctl file. Previously, the aforementioned race
condition could result in the 'else' branch
running while PROC_THERMAL_NONE was set,
leading to a null pointer deference.
Signed-off-by: Aaron Hill <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../processor_thermal_device.c | 28 ++++++++++---------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index 06d46e2ff337e..1fdf6fd24cdff 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -77,7 +77,12 @@ static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct pci_dev *pci_dev; \
struct platform_device *pdev; \
struct proc_thermal_device *proc_dev; \
-\
+ \
+ if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
+ dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
+ return 0; \
+ } \
+ \
if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
pdev = to_platform_device(dev); \
proc_dev = platform_get_drvdata(pdev); \
@@ -291,11 +296,6 @@ static int proc_thermal_add(struct device *dev,
*priv = proc_priv;
ret = proc_thermal_read_ppcc(proc_priv);
- if (!ret) {
- ret = sysfs_create_group(&dev->kobj,
- &power_limit_attribute_group);
-
- }
if (ret)
return ret;
@@ -309,8 +309,7 @@ static int proc_thermal_add(struct device *dev,
proc_priv->int340x_zone = int340x_thermal_zone_add(adev, ops);
if (IS_ERR(proc_priv->int340x_zone)) {
- ret = PTR_ERR(proc_priv->int340x_zone);
- goto remove_group;
+ return PTR_ERR(proc_priv->int340x_zone);
} else
ret = 0;
@@ -324,9 +323,6 @@ static int proc_thermal_add(struct device *dev,
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
-remove_group:
- sysfs_remove_group(&proc_priv->dev->kobj,
- &power_limit_attribute_group);
return ret;
}
@@ -357,7 +353,10 @@ static int int3401_add(struct platform_device *pdev)
platform_set_drvdata(pdev, proc_priv);
proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
- return 0;
+ dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PLATFORM_DEV\n");
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ &power_limit_attribute_group);
}
static int int3401_remove(struct platform_device *pdev)
@@ -434,7 +433,10 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
}
- return 0;
+ dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PCI\n");
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ &power_limit_attribute_group);
}
static void proc_thermal_pci_remove(struct pci_dev *pdev)
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.
Signed-off-by: Tomonori Sakita <[email protected]>
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5c471c3481bdf..800996522fdc2 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1494,7 +1494,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}
/* ask the core to calculate the divisor */
- baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);
spin_lock_irqsave(&sport->port.lock, flags);
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ]
Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:
e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")
relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.
[ peterz: Added changelog. ]
Signed-off-by: Xie Yongji <[email protected]>
Signed-off-by: Zhang Yu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/rwsem-xadd.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index a4112dfcd0fb1..be06c45cbe4f9 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -195,15 +195,22 @@ static void __rwsem_mark_wake(struct rw_semaphore *sem,
woken++;
tsk = waiter->task;
- wake_q_add(wake_q, tsk);
+ get_task_struct(tsk);
list_del(&waiter->list);
/*
- * Ensure that the last operation is setting the reader
+ * Ensure calling get_task_struct() before setting the reader
* waiter to nil such that rwsem_down_read_failed() cannot
* race with do_exit() by always holding a reference count
* to the task to wakeup.
*/
smp_store_release(&waiter->task, NULL);
+ /*
+ * Ensure issuing the wakeup (either by us or someone else)
+ * after setting the reader waiter to nil.
+ */
+ wake_q_add(wake_q, tsk);
+ /* wake_q_add() already take the task ref */
+ put_task_struct(tsk);
}
adjustment = woken * RWSEM_ACTIVE_READ_BIAS - adjustment;
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 6a8f1d8d701462937ce01a3f2219af5435372af7 which is
commit 0a42e99b58a208839626465af194cfe640ef9493 upstream.
It does not work properly in the 4.9.y tree and causes more problems
than it fixes, so revert it.
Reported-by: Thomas Lindroth <[email protected]>
Reported-by: Jan Kara <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/loop.c | 39 +++++++++++++++++++--------------------
1 file changed, 19 insertions(+), 20 deletions(-)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -81,6 +81,7 @@
#include <asm/uaccess.h>
static DEFINE_IDR(loop_index_idr);
+static DEFINE_MUTEX(loop_index_mutex);
static DEFINE_MUTEX(loop_ctl_mutex);
static int max_part;
@@ -1559,11 +1560,9 @@ static int lo_compat_ioctl(struct block_
static int lo_open(struct block_device *bdev, fmode_t mode)
{
struct loop_device *lo;
- int err;
+ int err = 0;
- err = mutex_lock_killable(&loop_ctl_mutex);
- if (err)
- return err;
+ mutex_lock(&loop_index_mutex);
lo = bdev->bd_disk->private_data;
if (!lo) {
err = -ENXIO;
@@ -1572,7 +1571,7 @@ static int lo_open(struct block_device *
atomic_inc(&lo->lo_refcnt);
out:
- mutex_unlock(&loop_ctl_mutex);
+ mutex_unlock(&loop_index_mutex);
return err;
}
@@ -1581,11 +1580,12 @@ static void lo_release(struct gendisk *d
struct loop_device *lo;
int err;
- mutex_lock(&loop_ctl_mutex);
+ mutex_lock(&loop_index_mutex);
lo = disk->private_data;
if (atomic_dec_return(&lo->lo_refcnt))
- goto out_unlock;
+ goto unlock_index;
+ mutex_lock(&loop_ctl_mutex);
if (lo->lo_flags & LO_FLAGS_AUTOCLEAR) {
/*
* In autoclear mode, stop the loop thread
@@ -1593,7 +1593,7 @@ static void lo_release(struct gendisk *d
*/
err = loop_clr_fd(lo);
if (!err)
- return;
+ goto unlock_index;
} else {
/*
* Otherwise keep thread (if running) and config,
@@ -1602,8 +1602,9 @@ static void lo_release(struct gendisk *d
loop_flush(lo);
}
-out_unlock:
mutex_unlock(&loop_ctl_mutex);
+unlock_index:
+ mutex_unlock(&loop_index_mutex);
}
static const struct block_device_operations lo_fops = {
@@ -1889,7 +1890,7 @@ static struct kobject *loop_probe(dev_t
struct kobject *kobj;
int err;
- mutex_lock(&loop_ctl_mutex);
+ mutex_lock(&loop_index_mutex);
err = loop_lookup(&lo, MINOR(dev) >> part_shift);
if (err < 0)
err = loop_add(&lo, MINOR(dev) >> part_shift);
@@ -1897,7 +1898,7 @@ static struct kobject *loop_probe(dev_t
kobj = NULL;
else
kobj = get_disk(lo->lo_disk);
- mutex_unlock(&loop_ctl_mutex);
+ mutex_unlock(&loop_index_mutex);
*part = 0;
return kobj;
@@ -1907,13 +1908,9 @@ static long loop_control_ioctl(struct fi
unsigned long parm)
{
struct loop_device *lo;
- int ret;
-
- ret = mutex_lock_killable(&loop_ctl_mutex);
- if (ret)
- return ret;
+ int ret = -ENOSYS;
- ret = -ENOSYS;
+ mutex_lock(&loop_index_mutex);
switch (cmd) {
case LOOP_CTL_ADD:
ret = loop_lookup(&lo, parm);
@@ -1927,6 +1924,7 @@ static long loop_control_ioctl(struct fi
ret = loop_lookup(&lo, parm);
if (ret < 0)
break;
+ mutex_lock(&loop_ctl_mutex);
if (lo->lo_state != Lo_unbound) {
ret = -EBUSY;
mutex_unlock(&loop_ctl_mutex);
@@ -1938,6 +1936,7 @@ static long loop_control_ioctl(struct fi
break;
}
lo->lo_disk->private_data = NULL;
+ mutex_unlock(&loop_ctl_mutex);
idr_remove(&loop_index_idr, lo->lo_number);
loop_remove(lo);
break;
@@ -1947,7 +1946,7 @@ static long loop_control_ioctl(struct fi
break;
ret = loop_add(&lo, -1);
}
- mutex_unlock(&loop_ctl_mutex);
+ mutex_unlock(&loop_index_mutex);
return ret;
}
@@ -2030,10 +2029,10 @@ static int __init loop_init(void)
THIS_MODULE, loop_probe, NULL, NULL);
/* pre-create number of devices given by config or max_loop */
- mutex_lock(&loop_ctl_mutex);
+ mutex_lock(&loop_index_mutex);
for (i = 0; i < nr; i++)
loop_add(&lo, i);
- mutex_unlock(&loop_ctl_mutex);
+ mutex_unlock(&loop_index_mutex);
printk(KERN_INFO "loop: module loaded\n");
return 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8b9433eb4de3c26a9226c981c283f9f4896ae030 ]
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode. This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.
The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO. This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: Jeff Moyer <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Ernesto A. Fernández <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/direct-io.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 07cc38ec66ca6..fc90f0c33cbe4 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -616,6 +616,7 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio,
unsigned long fs_count; /* Number of filesystem-sized blocks */
int create;
unsigned int i_blkbits = sdio->blkbits + sdio->blkfactor;
+ loff_t i_size;
/*
* If there was a memory error and we've overwritten all the
@@ -645,8 +646,8 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio,
*/
create = dio->op == REQ_OP_WRITE;
if (dio->flags & DIO_SKIP_HOLES) {
- if (fs_startblk <= ((i_size_read(dio->inode) - 1) >>
- i_blkbits))
+ i_size = i_size_read(dio->inode);
+ if (i_size && fs_startblk <= (i_size - 1) >> i_blkbits)
create = 0;
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ]
The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmveth.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 4996228fd7e61..955f658f3b65f 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1240,7 +1240,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
struct iphdr *iph;
u16 mss = 0;
-restart_poll:
while (frames_processed < budget) {
if (!ibmveth_rxq_pending_buffer(adapter))
break;
@@ -1338,7 +1337,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
napi_reschedule(napi)) {
lpar_rc = h_vio_signal(adapter->vdev->unit_address,
VIO_IRQ_DISABLE);
- goto restart_poll;
}
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]
Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: Chaitanya Tata <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 36d1d25082e32..7c19d0d2549b1 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -773,7 +773,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
* definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
* however it is safe for now to assume that a frequency rule should not be
* part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
* 60 GHz band.
* This resolution can be lowered and should be considered as we add
* regulatory rule support for other "bands".
@@ -788,7 +788,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
* with the Channel starting frequency above 45 GHz.
*/
u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
- 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+ 20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
return true;
if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ]
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().
ln->fc_vport is dereferenced in csio_vport_set_state().
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_attr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c
index 2d1c4ebd40f91..6587f20cff1a1 100644
--- a/drivers/scsi/csiostor/csio_attr.c
+++ b/drivers/scsi/csiostor/csio_attr.c
@@ -582,12 +582,12 @@ csio_vport_create(struct fc_vport *fc_vport, bool disable)
}
fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING);
+ ln->fc_vport = fc_vport;
if (csio_fcoe_alloc_vnp(hw, ln))
goto error;
*(struct csio_lnode **)fc_vport->dd_data = ln;
- ln->fc_vport = fc_vport;
if (!fc_vport->node_name)
fc_vport->node_name = wwn_to_u64(csio_ln_wwnn(ln));
if (!fc_vport->port_name)
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ]
In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.
Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/svm.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index c8efacf2e65f1..afc2bd03b4d9e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3932,25 +3932,14 @@ static int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
kvm_lapic_reg_write(apic, APIC_ICR, icrl);
break;
case AVIC_IPI_FAILURE_TARGET_NOT_RUNNING: {
- int i;
- struct kvm_vcpu *vcpu;
- struct kvm *kvm = svm->vcpu.kvm;
struct kvm_lapic *apic = svm->vcpu.arch.apic;
/*
- * At this point, we expect that the AVIC HW has already
- * set the appropriate IRR bits on the valid target
- * vcpus. So, we just need to kick the appropriate vcpu.
+ * Update ICR high and low, then emulate sending IPI,
+ * which is handled when writing APIC_ICR.
*/
- kvm_for_each_vcpu(i, vcpu, kvm) {
- bool m = kvm_apic_match_dest(vcpu, apic,
- icrl & KVM_APIC_SHORT_MASK,
- GET_APIC_DEST_FIELD(icrh),
- icrl & KVM_APIC_DEST_MASK);
-
- if (m && !avic_vcpu_is_running(vcpu))
- kvm_vcpu_wake_up(vcpu);
- }
+ kvm_lapic_reg_write(apic, APIC_ICR2, icrh);
+ kvm_lapic_reg_write(apic, APIC_ICR, icrl);
break;
}
case AVIC_IPI_FAILURE_INVALID_TARGET:
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 01c10880d24291a96a4ab0da773e3c5ce4d12da8 ]
We see dwc3 endpoint stopped by unwanted irq during
suspend resume test, which is caused dwc3 ep can't be started
with error "No Resource".
Here, add synchronize_irq before suspend to sync the
pending IRQ handlers complete.
Signed-off-by: Bo He <[email protected]>
Signed-off-by: Yu Wang <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index ed6b9bfe37595..c481df18a5a1d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3096,6 +3096,8 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
dwc3_disconnect_gadget(dwc);
__dwc3_gadget_stop(dwc);
+ synchronize_irq(dwc->irq_gadget);
+
return 0;
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ]
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <[email protected]>
Reviewed-by: Yang Wei <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/asix_devices.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5be6b67492d52..393fd3ed6b94c 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -729,8 +729,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
chipcode &= AX_CHIPCODE_MASK;
- (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
- ax88772a_hw_reset(dev, 0);
+ ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+ ax88772a_hw_reset(dev, 0);
+
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
+ return ret;
+ }
/* Read PHYID register *AFTER* the PHY was reset properly */
phyid = asix_get_phyid(dev);
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ]
During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:
struct {
struct ieee80211_hdr_3addr hdr;
u8 category;
u8 action_code;
} __packed action;
But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[ETH_ALEN];
} __packed __aligned(2);
Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.
This removes the following warning (W=1):
net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]
Cc: Johannes Berg <[email protected]>
Suggested-by: Johannes Berg <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7013b37637556..23f6c8baae951 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -217,7 +217,7 @@ static void ieee80211_handle_mu_mimo_mon(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr_3addr hdr;
u8 category;
u8 action_code;
- } __packed action;
+ } __packed __aligned(2) action;
if (!sdata)
return;
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ]
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/svm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index afc2bd03b4d9e..01eb0451b96d3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2862,6 +2862,14 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
kvm_mmu_reset_context(&svm->vcpu);
kvm_mmu_load(&svm->vcpu);
+ /*
+ * Drop what we picked up for L2 via svm_complete_interrupts() so it
+ * doesn't end up in L1.
+ */
+ svm->vcpu.arch.nmi_injected = false;
+ kvm_clear_exception_queue(&svm->vcpu);
+ kvm_clear_interrupt_queue(&svm->vcpu);
+
return 0;
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Forshee <[email protected]>
commit 186b8f1587c79c2fa04bfa392fdf084443e398c1 upstream.
Several callers to epapr_hypercall() pass an uninitialized stack
allocated array for the input arguments, presumably because they
have no input arguments. However this can produce errors like
this one
arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized]
unsigned long register r3 asm("r3") = in[0];
~~^~~
Fix callers to this function to always zero-initialize the input
arguments array to prevent this.
Signed-off-by: Seth Forshee <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Cc: "A. Wilcox" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/epapr_hcalls.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -508,7 +508,7 @@ static unsigned long epapr_hypercall(uns
static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
unsigned long r;
@@ -520,7 +520,7 @@ static inline long epapr_hypercall0_1(un
static inline long epapr_hypercall0(unsigned int nr)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
return epapr_hypercall(in, out, nr);
@@ -528,7 +528,7 @@ static inline long epapr_hypercall0(unsi
static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -538,7 +538,7 @@ static inline long epapr_hypercall1(unsi
static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
unsigned long p2)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -549,7 +549,7 @@ static inline long epapr_hypercall2(unsi
static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
unsigned long p2, unsigned long p3)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -562,7 +562,7 @@ static inline long epapr_hypercall4(unsi
unsigned long p2, unsigned long p3,
unsigned long p4)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 906a9abc5de73c383af518f5a806f4be2993a0c7 ]
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.
Signed-off-by: Rander Wang <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index 7486a0022fdea..993d2c105ae14 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -191,7 +191,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
diff --git a/sound/soc/intel/boards/haswell.c b/sound/soc/intel/boards/haswell.c
index 863f1d5e2a2c9..11d0cc2b0e390 100644
--- a/sound/soc/intel/boards/haswell.c
+++ b/sound/soc/intel/boards/haswell.c
@@ -145,7 +145,7 @@ static struct snd_soc_dai_link haswell_rt5640_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 678e2b44c8e3fec3afc7202f1996a4500a50be93 ]
The problem is seen in the q6asm_dai_compr_set_params() function:
ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys,
(prtd->pcm_size / prtd->periods),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
prtd->periods);
In this code prtd->pcm_size is the buffer_size and prtd->periods comes
from params->buffer.fragments. If we allow the number of fragments to
be zero then it results in a divide by zero bug. One possible fix would
be to use prtd->pcm_count directly instead of using the division to
re-calculate it. But I decided that it doesn't really make sense to
allow zero fragments.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 4490a699030b1..555df64d46ffc 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -529,7 +529,8 @@ static int snd_compress_check_input(struct snd_compr_params *params)
{
/* first let's check the buffer parameter's */
if (params->buffer.fragment_size == 0 ||
- params->buffer.fragments > INT_MAX / params->buffer.fragment_size)
+ params->buffer.fragments > INT_MAX / params->buffer.fragment_size ||
+ params->buffer.fragments == 0)
return -EINVAL;
/* now codec parameters */
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 2a418cf3f5f1caf911af288e978d61c9844b0695 upstream.
When calling __put_user(foo(), ptr), the __put_user() macro would call
foo() in between __uaccess_begin() and __uaccess_end(). If that code
were buggy, then those bugs would be run without SMAP protection.
Fortunately, there seem to be few instances of the problem in the
kernel. Nevertheless, __put_user() should be fixed to avoid doing this.
Therefore, evaluate __put_user()'s argument before setting AC.
This issue was noticed when an objtool hack by Peter Zijlstra complained
about genregs_get() and I compared the assembly output to the C source.
[ bp: Massage commit message and fixed up whitespace. ]
Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/uaccess.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -292,8 +292,7 @@ do { \
__put_user_asm(x, ptr, retval, "l", "k", "ir", errret); \
break; \
case 8: \
- __put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval, \
- errret); \
+ __put_user_asm_u64(x, ptr, retval, errret); \
break; \
default: \
__put_user_bad(); \
@@ -427,8 +426,10 @@ do { \
#define __put_user_nocheck(x, ptr, size) \
({ \
int __pu_err; \
+ __typeof__(*(ptr)) __pu_val; \
+ __pu_val = x; \
__uaccess_begin(); \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
+ __put_user_size(__pu_val, (ptr), (size), __pu_err, -EFAULT);\
__uaccess_end(); \
__builtin_expect(__pu_err, 0); \
})
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3fe931b31a4078395c1967f0495dcc9e5ec6b5e3 ]
The intel_soc_dts_iosf_init() function doesn't return NULL, it returns
error pointers.
Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/int340x_thermal/processor_thermal_device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index ff3b36f339e34..06d46e2ff337e 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -416,7 +416,7 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
proc_priv->soc_dts = intel_soc_dts_iosf_init(
INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
- if (proc_priv->soc_dts && pdev->irq) {
+ if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
ret = pci_enable_msi(pdev);
if (!ret) {
ret = request_threaded_irq(pdev->irq, NULL,
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit ffeafdd2bf0b280d67ec1a47ea6287910d271f3f upstream.
The sysfs phy_identifier attribute for a sas_end_device comes from the rphy
phy_identifier value.
Currently this is not being set for rphys with an end device attached, so
we see incorrect symlinks from systemd disk/by-path:
root@localhost:~# ls -l /dev/disk/by-path/
total 0
lrwxrwxrwx 1 root root 9 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part3 -> ../../sdc3
Indeed, each sas_end_device phy_identifier value is 0:
root@localhost:/# more sys/class/sas_device/end_device-0\:0\:2/phy_identifier
0
root@localhost:/# more sys/class/sas_device/end_device-0\:0\:10/phy_identifier
0
This patch fixes the discovery code to set the phy_identifier. With this,
we now get proper symlinks:
root@localhost:~# ls -l /dev/disk/by-path/
total 0
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy10-lun-0 -> ../../sdg
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy11-lun-0 -> ../../sdh
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part3 -> ../../sdc3
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy5-lun-0 -> ../../sdd
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0 -> ../../sde
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part1 -> ../../sde1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part2 -> ../../sde2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part3 -> ../../sde3
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0 -> ../../sdf
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part1 -> ../../sdf1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part2 -> ../../sdf2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part3 -> ../../sdf3
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: dann frazier <[email protected]>
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Tested-by: dann frazier <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -818,6 +818,7 @@ static struct domain_device *sas_ex_disc
rphy = sas_end_device_alloc(phy->port);
if (!rphy)
goto out_free;
+ rphy->identify.phy_identifier = phy_id;
child->rphy = rphy;
get_device(&rphy->dev);
@@ -845,6 +846,7 @@ static struct domain_device *sas_ex_disc
child->rphy = rphy;
get_device(&rphy->dev);
+ rphy->identify.phy_identifier = phy_id;
sas_fill_in_rphy(child, rphy);
list_add_tail(&child->disco_list_node, &parent->port->disco_list);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ]
Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: Kristian H. Kristensen <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_rd.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 8487f461f05f3..4823019eb422b 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -112,7 +112,9 @@ static void rd_write(struct msm_rd_state *rd, const void *buf, int sz)
char *fptr = &fifo->buf[fifo->head];
int n;
- wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0);
+ wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0 || !rd->open);
+ if (!rd->open)
+ return;
n = min(sz, circ_space_to_end(&rd->fifo));
memcpy(fptr, ptr, n);
@@ -202,7 +204,10 @@ static int rd_open(struct inode *inode, struct file *file)
static int rd_release(struct inode *inode, struct file *file)
{
struct msm_rd_state *rd = inode->i_private;
+
rd->open = false;
+ wake_up_all(&rd->fifo_event);
+
return 0;
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 7d839c10b848aa66ca1290a21ee600bd17c2dcb4 which is
commit 967d1dc144b50ad005e5eecdfadfbcfb399ffff6 upstream.
It does not work properly in the 4.9.y tree and causes more problems
than it fixes, so revert it.
Reported-by: Thomas Lindroth <[email protected]>
Reported-by: Jan Kara <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/loop.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1575,15 +1575,12 @@ out:
return err;
}
-static void lo_release(struct gendisk *disk, fmode_t mode)
+static void __lo_release(struct loop_device *lo)
{
- struct loop_device *lo;
int err;
- mutex_lock(&loop_index_mutex);
- lo = disk->private_data;
if (atomic_dec_return(&lo->lo_refcnt))
- goto unlock_index;
+ return;
mutex_lock(&loop_ctl_mutex);
if (lo->lo_flags & LO_FLAGS_AUTOCLEAR) {
@@ -1593,7 +1590,7 @@ static void lo_release(struct gendisk *d
*/
err = loop_clr_fd(lo);
if (!err)
- goto unlock_index;
+ return;
} else {
/*
* Otherwise keep thread (if running) and config,
@@ -1603,7 +1600,12 @@ static void lo_release(struct gendisk *d
}
mutex_unlock(&loop_ctl_mutex);
-unlock_index:
+}
+
+static void lo_release(struct gendisk *disk, fmode_t mode)
+{
+ mutex_lock(&loop_index_mutex);
+ __lo_release(disk->private_data);
mutex_unlock(&loop_index_mutex);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ]
| CC mm/nobootmem.o
|In file included from ./include/asm-generic/bug.h:18:0,
| from ./arch/arc/include/asm/bug.h:32,
| from ./include/linux/bug.h:5,
| from ./include/linux/mmdebug.h:5,
| from ./include/linux/gfp.h:5,
| from ./include/linux/slab.h:15,
| from mm/nobootmem.c:14:
|mm/nobootmem.c: In function '__free_pages_memory':
|./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast
| (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^
|./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck'
| (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
|./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp'
| __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
|./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp'
| #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
|mm/nobootmem.c:104:11: note: in expansion of macro 'min'
| order = min(MAX_ORDER - 1UL, __ffs(start));
Change __ffs return value from 'int' to 'unsigned long' as it
is done in other implementations (like asm-generic, x86, etc...)
to avoid build-time warnings in places where type is strictly
checked.
As __ffs may return values in [0-31] interval changing return
type to unsigned is valid.
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/include/asm/bitops.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 8da87feec59aa..99e6d8948f4ac 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -340,7 +340,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
{
if (!word)
return word;
@@ -400,9 +400,9 @@ static inline __attribute__ ((const)) int ffs(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
{
- int n;
+ unsigned long n;
asm volatile(
" ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c407cd008fd039320d147088b52d0fa34ed3ddcb ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-audmux.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index fc57da341d610..136df38c4536c 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -86,49 +86,49 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
if (!buf)
return -ENOMEM;
- ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+ ret = scnprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
pdcr, ptcr);
if (ptcr & IMX_AUDMUX_V2_PTCR_TFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS output from %s, ",
audmux_port_string((ptcr >> 27) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_TCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk output from %s",
audmux_port_string((ptcr >> 22) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk input");
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (ptcr & IMX_AUDMUX_V2_PTCR_SYN) {
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"Port is symmetric");
} else {
if (ptcr & IMX_AUDMUX_V2_PTCR_RFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS output from %s, ",
audmux_port_string((ptcr >> 17) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_RCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk output from %s",
audmux_port_string((ptcr >> 12) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk input");
}
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"\nData received from %s\n",
audmux_port_string((pdcr >> 13) & 0x7));
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonathan Neuschäfer <[email protected]>
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream.
When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).
The call tree looks something like this:
mmc_spi_probe
mmc_add_host
mmc_start_host
_mmc_detect_change
mmc_schedule_delayed_work(&host->detect, 0)
mmc_rescan
host->bus_ops->detect(host)
mmc_detect
_mmc_detect_card_removed
host->ops->get_cd(host)
mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
mmc_gpiod_request_cd
ctx->cd_gpio = desc
To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/mmc_spi.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1450,6 +1450,7 @@ static int mmc_spi_probe(struct spi_devi
mmc->caps &= ~MMC_CAP_NEEDS_POLL;
mmc_gpiod_request_cd_irq(mmc);
}
+ mmc_detect_change(mmc, 0);
if (host->pdata && host->pdata->flags & MMC_SPI_USE_RO_GPIO) {
has_ro = true;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ]
The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.
Signed-off-by: Atsushi Nemoto <[email protected]>
Acked-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/altera/altera_tse_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index a0eee72186957..e306342506f1f 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -692,8 +692,10 @@ static struct phy_device *connect_local_phy(struct net_device *dev)
phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
priv->phy_iface);
- if (IS_ERR(phydev))
+ if (IS_ERR(phydev)) {
netdev_err(dev, "Could not attach to PHY\n");
+ phydev = NULL;
+ }
} else {
int ret;
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]
In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero. For unicast frames
destined for other hosts, we stop processing the frame at that point.
For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA. That
doesn't match the usual definition of "dropped," so don't count
those as such.
With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.
Signed-off-by: Bob Copeland <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index af02d2136a066..7013b37637556 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2510,7 +2510,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
skb_set_queue_mapping(skb, q);
if (!--mesh_hdr->ttl) {
- IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+ if (!is_multicast_ether_addr(hdr->addr1))
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh,
+ dropped_frames_ttl);
goto out;
}
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn <[email protected]>
commit 0a1d52994d440e21def1c2174932410b4f2a98a1 upstream.
security_mmap_addr() does a capability check with current_cred(), but
we can reach this code from contexts like a VFS write handler where
current_cred() must not be used.
This can be abused on systems without SMAP to make NULL pointer
dereferences exploitable again.
Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses")
Cc: [email protected]
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mmap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2345,12 +2345,11 @@ int expand_downwards(struct vm_area_stru
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *prev;
unsigned long gap_addr;
- int error;
+ int error = 0;
address &= PAGE_MASK;
- error = security_mmap_addr(address);
- if (error)
- return error;
+ if (address < mmap_min_addr)
+ return -EPERM;
/* Enforce stack_guard_gap */
gap_addr = address - stack_guard_gap;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]
Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.
Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0
Fixing this by allowing TDLS setup request only when we have completed
association.
Signed-off-by: Balaji Pothunoori <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/cfg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6ef9d32c34f1e..954315e1661df 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1425,6 +1425,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
sta->sta.tdls = true;
+ if (sta->sta.tdls && sdata->vif.type == NL80211_IFTYPE_STATION &&
+ !sdata->u.mgd.associated)
+ return -EINVAL;
+
err = sta_apply_parameters(local, sta, params);
if (err) {
sta_info_free(local, sta);
--
2.19.1
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit df28169e1538e4a8bcd8b779b043e5aa6524545c ]
The source_sink_alloc_func() function is supposed to return error
pointers on error. The function is called from usb_get_function() which
doesn't check for NULL returns so it would result in an Oops.
Of course, in the current kernel, small allocations always succeed so
this doesn't affect runtime.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_sourcesink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 8784fa12ea2c6..6e9d958004a0d 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -842,7 +842,7 @@ static struct usb_function *source_sink_alloc_func(
ss = kzalloc(sizeof(*ss), GFP_KERNEL);
if (!ss)
- return NULL;
+ return ERR_PTR(-ENOMEM);
ss_opts = container_of(fi, struct f_ss_opts, func_inst);
--
2.19.1
stable-rc/linux-4.9.y boot: 91 boots: 0 failed, 90 passed with 1 untried/unknown (v4.9.161-33-g95ebbd164ce2)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.161-33-g95ebbd164ce2/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.161-33-g95ebbd164ce2/
Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.161-33-g95ebbd164ce2
Git Commit: 95ebbd164ce260ac8147ec92861b752e1416026c
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 45 unique boards, 21 SoC families, 13 builds out of 193
---
For more info write to <[email protected]>
On Mon, 4 Mar 2019 at 13:52, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.162 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Mar 6 08:15:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.162-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.162-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 95ebbd164ce260ac8147ec92861b752e1416026c
git describe: v4.9.161-33-g95ebbd164ce2
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.161-33-g95ebbd164ce2
No regressions (compared to build v4.9.161)
No fixes (compared to build v4.9.161)
Ran 20841 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-mm-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 3/4/19 12:21 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.162 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Mar 6 08:15:49 UTC 2019.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 315 pass: 315 fail: 0
Guenter
On 04/03/2019 08:21, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.162 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Mar 6 08:15:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.162-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
20 tests: 20 pass, 0 fail
Linux version: 4.9.162-rc1-g95ebbd1
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 3/4/19 1:21 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.162 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Mar 6 08:15:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.162-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah