Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
Signed-off-by: Patrick Venture <[email protected]>
---
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.
---
.../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
new file mode 100644
index 000000000000..1092d62d1c92
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
@@ -0,0 +1,32 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
+======================================================================
+
+The bridge is available on platforms with the VGA enabled on the Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+ - "aspeed,ast2400-p2a-ctrl"
+ - "aspeed,ast2500-p2a-ctrl"
+
+ - syscon: handle to syscon device node controlling PCI.
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for the PCI
+ to AHB mapping
+
+Example:
+
+p2a: p2a-control@1e6e2000 {
+ compatible = "aspeed,ast2400-p2a-ctrl";
+ memory-region = <&reserved_memory>;
+ syscon = <&syscon>;
+};
--
2.21.0.352.gf09ad66450-goog
On Mon, Mar 04, 2019 at 10:55:36AM -0800, Patrick Venture wrote:
> Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
>
> Signed-off-by: Patrick Venture <[email protected]>
> ---
> Changes for v6:
> - None
> Changes for v5:
> - None
> Changes for v4:
> - None
> Changes for v3:
> - None
> Changes for v2:
> - Added comment about syscon required parameter.
> ---
> .../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> new file mode 100644
> index 000000000000..1092d62d1c92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> @@ -0,0 +1,32 @@
> +======================================================================
> +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
> +======================================================================
> +
> +The bridge is available on platforms with the VGA enabled on the Aspeed device.
> +In this case, the host has access to a 64KiB window into all of the BMC's
> +memory. The BMC can disable this bridge. If the bridge is enabled, the host
> +has read access to all the regions of memory, however the host only has read
> +and write access depending on a register controlled by the BMC.
> +
> +Required properties:
> +===================
> +
> + - compatible: must be one of:
> + - "aspeed,ast2400-p2a-ctrl"
> + - "aspeed,ast2500-p2a-ctrl"
> +
> + - syscon: handle to syscon device node controlling PCI.
> +
> +Optional properties:
> +===================
> +
> +- memory-region: A phandle to a reserved_memory region to be used for the PCI
> + to AHB mapping
> +
> +Example:
> +
> +p2a: p2a-control@1e6e2000 {
> + compatible = "aspeed,ast2400-p2a-ctrl";
> + memory-region = <&reserved_memory>;
> + syscon = <&syscon>;
Make this node a child of what you are pointing to instead if this the
only control interface.
Rob
On Mon, Mar 11, 2019 at 3:20 PM Rob Herring <[email protected]> wrote:
>
> On Mon, Mar 04, 2019 at 10:55:36AM -0800, Patrick Venture wrote:
> > Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
> >
> > Signed-off-by: Patrick Venture <[email protected]>
> > ---
> > Changes for v6:
> > - None
> > Changes for v5:
> > - None
> > Changes for v4:
> > - None
> > Changes for v3:
> > - None
> > Changes for v2:
> > - Added comment about syscon required parameter.
> > ---
> > .../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> >
> > diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > new file mode 100644
> > index 000000000000..1092d62d1c92
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > @@ -0,0 +1,32 @@
> > +======================================================================
> > +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
> > +======================================================================
> > +
> > +The bridge is available on platforms with the VGA enabled on the Aspeed device.
> > +In this case, the host has access to a 64KiB window into all of the BMC's
> > +memory. The BMC can disable this bridge. If the bridge is enabled, the host
> > +has read access to all the regions of memory, however the host only has read
> > +and write access depending on a register controlled by the BMC.
> > +
> > +Required properties:
> > +===================
> > +
> > + - compatible: must be one of:
> > + - "aspeed,ast2400-p2a-ctrl"
> > + - "aspeed,ast2500-p2a-ctrl"
> > +
> > + - syscon: handle to syscon device node controlling PCI.
> > +
> > +Optional properties:
> > +===================
> > +
> > +- memory-region: A phandle to a reserved_memory region to be used for the PCI
> > + to AHB mapping
> > +
> > +Example:
> > +
> > +p2a: p2a-control@1e6e2000 {
> > + compatible = "aspeed,ast2400-p2a-ctrl";
> > + memory-region = <&reserved_memory>;
> > + syscon = <&syscon>;
>
> Make this node a child of what you are pointing to instead if this the
> only control interface.
You're suggesting I make this a child of the syscon?
>
> Rob
>
>
>
On Mon, Mar 11, 2019 at 6:49 PM Patrick Venture <[email protected]> wrote:
>
> On Mon, Mar 11, 2019 at 3:20 PM Rob Herring <[email protected]> wrote:
> >
> > On Mon, Mar 04, 2019 at 10:55:36AM -0800, Patrick Venture wrote:
> > > Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
> > >
> > > Signed-off-by: Patrick Venture <[email protected]>
> > > ---
> > > Changes for v6:
> > > - None
> > > Changes for v5:
> > > - None
> > > Changes for v4:
> > > - None
> > > Changes for v3:
> > > - None
> > > Changes for v2:
> > > - Added comment about syscon required parameter.
> > > ---
> > > .../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
> > > 1 file changed, 32 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > new file mode 100644
> > > index 000000000000..1092d62d1c92
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > @@ -0,0 +1,32 @@
> > > +======================================================================
> > > +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
> > > +======================================================================
> > > +
> > > +The bridge is available on platforms with the VGA enabled on the Aspeed device.
> > > +In this case, the host has access to a 64KiB window into all of the BMC's
> > > +memory. The BMC can disable this bridge. If the bridge is enabled, the host
> > > +has read access to all the regions of memory, however the host only has read
> > > +and write access depending on a register controlled by the BMC.
> > > +
> > > +Required properties:
> > > +===================
> > > +
> > > + - compatible: must be one of:
> > > + - "aspeed,ast2400-p2a-ctrl"
> > > + - "aspeed,ast2500-p2a-ctrl"
> > > +
> > > + - syscon: handle to syscon device node controlling PCI.
> > > +
> > > +Optional properties:
> > > +===================
> > > +
> > > +- memory-region: A phandle to a reserved_memory region to be used for the PCI
> > > + to AHB mapping
> > > +
> > > +Example:
> > > +
> > > +p2a: p2a-control@1e6e2000 {
> > > + compatible = "aspeed,ast2400-p2a-ctrl";
> > > + memory-region = <&reserved_memory>;
> > > + syscon = <&syscon>;
> >
> > Make this node a child of what you are pointing to instead if this the
> > only control interface.
>
> You're suggesting I make this a child of the syscon?
Yes.
Rob
On Mon, Mar 11, 2019 at 7:38 PM Rob Herring <[email protected]> wrote:
>
> On Mon, Mar 11, 2019 at 6:49 PM Patrick Venture <[email protected]> wrote:
> >
> > On Mon, Mar 11, 2019 at 3:20 PM Rob Herring <[email protected]> wrote:
> > >
> > > On Mon, Mar 04, 2019 at 10:55:36AM -0800, Patrick Venture wrote:
> > > > Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
> > > >
> > > > Signed-off-by: Patrick Venture <[email protected]>
> > > > ---
> > > > Changes for v6:
> > > > - None
> > > > Changes for v5:
> > > > - None
> > > > Changes for v4:
> > > > - None
> > > > Changes for v3:
> > > > - None
> > > > Changes for v2:
> > > > - Added comment about syscon required parameter.
> > > > ---
> > > > .../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
> > > > 1 file changed, 32 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > > new file mode 100644
> > > > index 000000000000..1092d62d1c92
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > > @@ -0,0 +1,32 @@
> > > > +======================================================================
> > > > +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
> > > > +======================================================================
> > > > +
> > > > +The bridge is available on platforms with the VGA enabled on the Aspeed device.
> > > > +In this case, the host has access to a 64KiB window into all of the BMC's
> > > > +memory. The BMC can disable this bridge. If the bridge is enabled, the host
> > > > +has read access to all the regions of memory, however the host only has read
> > > > +and write access depending on a register controlled by the BMC.
> > > > +
> > > > +Required properties:
> > > > +===================
> > > > +
> > > > + - compatible: must be one of:
> > > > + - "aspeed,ast2400-p2a-ctrl"
> > > > + - "aspeed,ast2500-p2a-ctrl"
> > > > +
> > > > + - syscon: handle to syscon device node controlling PCI.
> > > > +
> > > > +Optional properties:
> > > > +===================
> > > > +
> > > > +- memory-region: A phandle to a reserved_memory region to be used for the PCI
> > > > + to AHB mapping
> > > > +
> > > > +Example:
> > > > +
> > > > +p2a: p2a-control@1e6e2000 {
> > > > + compatible = "aspeed,ast2400-p2a-ctrl";
> > > > + memory-region = <&reserved_memory>;
> > > > + syscon = <&syscon>;
> > >
> > > Make this node a child of what you are pointing to instead if this the
> > > only control interface.
> >
> > You're suggesting I make this a child of the syscon?
>
> Yes.
Roger that, will update and send out a patchset v6 with the
corresponding changes.
>
> Rob