It's a 5.5" 720x1440 TFT LCD MIPI DSI panel with built in touchscreen and
backlight as found in the Librem 5 devkit.
These patches are against linux next as of 2019-02-08.
Changes from v2
* As per review comments from Sam Ravnborg
* Lowercase sentinel
* Drop '_panel' postfix
* DRM_DEV_ logging instead of plain DRM_
* Add Sam's Reviewed-by:
* Add "panel-rocktech-" to the driver name following
the pattern from other drm panel drivers.
Changes from v1
* As per review comments from Sam Ravnborg
* Make SPDX-License-Identifier match MODULE_LICENSE
* Sort include files alphabetically
* Drop drmP.h and use individual includes
* Drop superfuous 'x' in mode printout on error path
* Allpixelson_set: Add proper space around '*'
* Drop superfluous put_device(&ctx->backlight->dev);
* Add /* Sentinel */ in jh057n_of_match
* Drop jh057n->enabled
* Drop drm_display_info_set_bus_formats
* Kconfig: Depend on BACKLIGHT_CLASS_DEVICE which somehow got lost
* Move jh057n_enable close to jh057n_disable
Guido Günther (3):
dt-bindings: Add vendor prefix for ROCKTECH DISPLAYS LIMITED
dt-bindings: Add Rocktech jh057n00900 panel bindings
drm/panel: Add Rocktech jh057n00900 panel driver
.../display/panel/rocktech,jh057n00900.txt | 18 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
.../drm/panel/panel-rocktech-jh057n00900.c | 386 ++++++++++++++++++
5 files changed, 419 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
create mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
--
2.20.1
The Rocktec jh057n00900 is a 5.5" MIPI DSI video mode panel with a
720x1440 resolution and a built in backlight.
Signed-off-by: Guido Günther <[email protected]>
---
.../display/panel/rocktech,jh057n00900.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
new file mode 100644
index 000000000000..32f4001d2d6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
@@ -0,0 +1,18 @@
+Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
+
+Required properties:
+- compatible: should be "rocktech,jh057n00900"
+- reg: DSI virtual channel of the peripheral
+- reset-gpios: panel reset gpio
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ };
+ };
--
2.20.1
Add ROCKTECH DISPLAYS LIMITED (https://rocktech.com.hk) LCD panel
supplier.
Signed-off-by: Guido Günther <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 413c6f30ce88..cc24619a4249 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -338,6 +338,7 @@ ricoh Ricoh Co. Ltd.
rikomagic Rikomagic Tech Corp. Ltd
riscv RISC-V Foundation
rockchip Fuzhou Rockchip Electronics Co., Ltd
+rocktech ROCKTECH DISPLAYS LIMITED
rohm ROHM Semiconductor Co., Ltd
roofull Shenzhen Roofull Technology Co, Ltd
samsung Samsung Semiconductor
--
2.20.1
Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI
DSI video mode panel.
The panel seems to use a Sitronix ST7703 look alike (most of the
commands look similar to the ST7703's data sheet but use a different
number of parameters). The initial version of the DSI init sequence
(including sleeps) were provided by the vendor. Sleeps were reduced
considerably though to speed up initialization.
Signed-off-by: Guido Günther <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
.../drm/panel/panel-rocktech-jh057n00900.c | 386 ++++++++++++++++++
3 files changed, 400 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 3e070153ef21..42f541fe57ae 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -149,6 +149,19 @@ config DRM_PANEL_RAYDIUM_RM68200
Say Y here if you want to enable support for Raydium RM68200
720x1280 DSI video mode panel.
+config DRM_PANEL_ROCKTECH_JH057N00900
+ tristate "Rocktech JH057N00900 MIPI touchscreen panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Rocktech JH057N00900
+ MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
+ resolution of 720x1440 pixels, a built in backlight and touch
+ controller.
+ Touch input support is provided by the goodix driver and needs to be
+ selected separately.
+
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index e7ab71968bbf..902e871059d0 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
+obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
new file mode 100644
index 000000000000..158a6d548068
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
+ *
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <linux/backlight.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#define DRV_NAME "panel-rocktech-jh057n00900"
+
+/* Manufacturer specific Commands send via DSI */
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+#define ST7703_CMD_ALL_PIXEL_ON 0x23
+#define ST7703_CMD_SETDISP 0xB2
+#define ST7703_CMD_SETRGBIF 0xB3
+#define ST7703_CMD_SETCYC 0xB4
+#define ST7703_CMD_SETBGP 0xB5
+#define ST7703_CMD_SETVCOM 0xB6
+#define ST7703_CMD_SETOTP 0xB7
+#define ST7703_CMD_SETPOWER_EXT 0xB8
+#define ST7703_CMD_SETEXTC 0xB9
+#define ST7703_CMD_SETMIPI 0xBA
+#define ST7703_CMD_SETVDC 0xBC
+#define ST7703_CMD_SETSCR 0xC0
+#define ST7703_CMD_SETPOWER 0xC1
+#define ST7703_CMD_SETPANEL 0xCC
+#define ST7703_CMD_SETGAMMA 0xE0
+#define ST7703_CMD_SETEQ 0xE3
+#define ST7703_CMD_SETGIP1 0xE9
+#define ST7703_CMD_SETGIP2 0xEA
+
+struct jh057n {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct backlight_device *backlight;
+ bool prepared;
+
+ struct dentry *debugfs;
+};
+
+static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
+{
+ return container_of(panel, struct jh057n, panel);
+}
+
+#define dsi_generic_write_seq(dsi, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int jh057n_init_sequence(struct jh057n *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ struct device *dev = ctx->dev;
+ int ret;
+
+ /*
+ * Init sequence was supplied by the panel vendor. Most of the commands
+ * resemble the ST7703 but the number of parameters often don't match
+ * so it's likely a clone.
+ */
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
+ 0xF1, 0x12, 0x83);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
+ 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+ 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
+ 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
+ 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
+ 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
+ msleep(20);
+
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
+ dsi_generic_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
+ 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
+ 0xA5, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
+ 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
+ 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
+ 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
+ 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
+ 0x11, 0x18);
+ msleep(20);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode");
+ return ret;
+ }
+ /* Panel is operational 120 msec after reset */
+ msleep(60);
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret)
+ return ret;
+
+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done");
+ return 0;
+}
+
+static int jh057n_enable(struct drm_panel *panel)
+{
+ struct jh057n *ctx = panel_to_jh057n(panel);
+
+ return backlight_enable(ctx->backlight);
+}
+
+static int jh057n_disable(struct drm_panel *panel)
+{
+ struct jh057n *ctx = panel_to_jh057n(panel);
+
+ return backlight_disable(ctx->backlight);
+}
+
+static int jh057n_unprepare(struct drm_panel *panel)
+{
+ struct jh057n *ctx = panel_to_jh057n(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ if (!ctx->prepared)
+ return 0;
+
+ mipi_dsi_dcs_set_display_off(dsi);
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int jh057n_prepare(struct drm_panel *panel)
+{
+ struct jh057n *ctx = panel_to_jh057n(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel.");
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(20, 40);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ msleep(20);
+
+ ret = jh057n_init_sequence(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret);
+ return ret;
+ }
+
+ ctx->prepared = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 90,
+ .hsync_end = 720 + 90 + 20,
+ .htotal = 720 + 90 + 20 + 20,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 20,
+ .vsync_end = 1440 + 20 + 4,
+ .vtotal = 1440 + 20 + 4 + 12,
+ .vrefresh = 60,
+ .clock = 75276,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 65,
+ .height_mm = 130,
+};
+
+static int jh057n_get_modes(struct drm_panel *panel)
+{
+ struct jh057n *ctx = panel_to_jh057n(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ panel->connector->display_info.width_mm = mode->width_mm;
+ panel->connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(panel->connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs jh057n_drm_funcs = {
+ .disable = jh057n_disable,
+ .unprepare = jh057n_unprepare,
+ .prepare = jh057n_prepare,
+ .enable = jh057n_enable,
+ .get_modes = jh057n_get_modes,
+};
+
+static int allpixelson_set(void *data, u64 val)
+{
+ struct jh057n *ctx = data;
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on");
+ dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
+ msleep(val * 1000);
+ /* Reset the panel to get video back */
+ drm_panel_disable(&ctx->panel);
+ drm_panel_unprepare(&ctx->panel);
+ drm_panel_prepare(&ctx->panel);
+ drm_panel_enable(&ctx->panel);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
+ allpixelson_set, "%llu\n");
+
+static int jh057n_debugfs_init(struct jh057n *ctx)
+{
+ struct dentry *f;
+
+ ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
+ if (!ctx->debugfs)
+ return -ENOMEM;
+
+ f = debugfs_create_file("allpixelson", 0600,
+ ctx->debugfs, ctx, &allpixelson_fops);
+ if (!f)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void jh057n_debugfs_remove(struct jh057n *ctx)
+{
+ debugfs_remove_recursive(ctx->debugfs);
+ ctx->debugfs = NULL;
+}
+
+static int jh057n_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct jh057n *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ DRM_DEV_ERROR(dev, "cannot get reset gpio");
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+ ctx->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(ctx->backlight))
+ return PTR_ERR(ctx->backlight);
+
+ drm_panel_init(&ctx->panel);
+ ctx->panel.dev = dev;
+ ctx->panel.funcs = &jh057n_drm_funcs;
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?");
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh,
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ jh057n_debugfs_init(ctx);
+ return 0;
+}
+
+static void jh057n_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = jh057n_unprepare(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+ ret);
+
+ ret = jh057n_disable(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
+ ret);
+}
+
+static int jh057n_remove(struct mipi_dsi_device *dsi)
+{
+ struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ jh057n_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+ ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ jh057n_debugfs_remove(ctx);
+
+ return 0;
+}
+
+static const struct of_device_id jh057n_of_match[] = {
+ { .compatible = "rocktech,jh057n00900" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh057n_of_match);
+
+static struct mipi_dsi_driver jh057n_driver = {
+ .probe = jh057n_probe,
+ .remove = jh057n_remove,
+ .shutdown = jh057n_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = jh057n_of_match,
+ },
+};
+module_mipi_dsi_driver(jh057n_driver);
+
+MODULE_AUTHOR("Guido Günther <[email protected]>");
+MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
+MODULE_LICENSE("GPL v2");
--
2.20.1
Hi Thierry.
> Changes from v2
> * As per review comments from Sam Ravnborg
> * Lowercase sentinel
> * Drop '_panel' postfix
> * DRM_DEV_ logging instead of plain DRM_
> * Add Sam's Reviewed-by:
> * Add "panel-rocktech-" to the driver name following
> the pattern from other drm panel drivers.
With the changes done in v2 the patch series is IMO
ready to be applied.
Sam
Hi,
On Mon, Mar 04, 2019 at 07:05:52PM +0100, Sam Ravnborg wrote:
> Hi Thierry.
>
> > Changes from v2
> > * As per review comments from Sam Ravnborg
> > * Lowercase sentinel
> > * Drop '_panel' postfix
> > * DRM_DEV_ logging instead of plain DRM_
> > * Add Sam's Reviewed-by:
> > * Add "panel-rocktech-" to the driver name following
> > the pattern from other drm panel drivers.
>
> With the changes done in v2 the patch series is IMO
> ready to be applied.
Thanks a lot for the review. Is there anything I can do to get it
applied?
Cheers,
-- Guido