This is the start of the stable review cycle for the 4.4.177 release.
There are 230 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Mar 24 11:10:58 UTC 2019.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.177-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.177-rc1
Wanpeng Li <[email protected]>
KVM: X86: Fix residual mmio emulation request to userspace
Sean Christopherson <[email protected]>
KVM: nVMX: Ignore limit checks on VMX instructions using flat segments
Sean Christopherson <[email protected]>
KVM: nVMX: Sign extend displacements of VMX instr's mem operands
Gustavo A. R. Silva <[email protected]>
drm/radeon/evergreen_cs: fix missing break in switch statement
Sakari Ailus <[email protected]>
media: uvcvideo: Avoid NULL pointer dereference at the end of streaming
Zhang, Jun <[email protected]>
rcu: Do RCU GP kthread self-wakeup from softirq and interrupt
Viresh Kumar <[email protected]>
PM / wakeup: Rework wakeup source timer cancellation
Yihao Wu <[email protected]>
nfsd: fix wrong check in write_v4_end_grace()
NeilBrown <[email protected]>
nfsd: fix memory corruption caused by readdir
Trond Myklebust <[email protected]>
NFS: Don't recoalesce on error in nfs_pageio_complete_mirror()
Trond Myklebust <[email protected]>
NFS: Fix an I/O request leakage in nfs_do_recoalesce
Aditya Pakki <[email protected]>
md: Fix failed allocation of md_register_thread
Adrian Hunter <[email protected]>
perf intel-pt: Fix overlap calculation for padding
Adrian Hunter <[email protected]>
perf auxtrace: Define auxtrace record alignment
Adrian Hunter <[email protected]>
perf intel-pt: Fix CYC timestamp calculation after OVF
Peng Tao <[email protected]>
NFS41: pop some layoutget errors to application
NeilBrown <[email protected]>
dm: fix to_sector() for 32bit
Gustavo A. R. Silva <[email protected]>
ARM: s3c24xx: Fix boolean expressions in osiris_dvs_notify
Christophe Leroy <[email protected]>
powerpc/83xx: Also save/restore SPRG4-7 during suspend
Jordan Niethe <[email protected]>
powerpc/powernv: Make opal log only readable by root
Christophe Leroy <[email protected]>
powerpc/wii: properly disable use of BATs when requested.
Christophe Leroy <[email protected]>
powerpc/32: Clear on-stack exception marker upon exception return
zhangyi (F) <[email protected]>
jbd2: fix compile warning when using JBUFFER_TRACE
zhangyi (F) <[email protected]>
jbd2: clear dirty flag when revoking a buffer from an older transaction
Jay Dolan <[email protected]>
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()
Jay Dolan <[email protected]>
serial: 8250_pci: Fix number of ports for ACCES serial cards
Arnaldo Carvalho de Melo <[email protected]>
perf bench: Copy kernel files needed to build mem{cpy,set} x86_64 benchmarks
Sowjanya Komatineni <[email protected]>
i2c: tegra: fix maximum transfer size
QiaoChong <[email protected]>
parport_pc: fix find_superio io compare code, should use equal test.
Alexander Shishkin <[email protected]>
intel_th: Don't reference unassigned outputs
Zev Weiss <[email protected]>
kernel/sysctl.c: add missing range check in do_proc_dointvec_minmax_conv
Roman Penyaev <[email protected]>
mm/vmalloc: fix size check for remap_vmalloc_range_partial()
Phuong Nguyen <[email protected]>
dmaengine: usb-dmac: Make DMAC system sleep callbacks explicit
Paul Cercueil <[email protected]>
clk: ingenic: Fix round_rate misbehaving with non-integer dividers
Jan Kara <[email protected]>
ext2: Fix underflow in ext2_max_size()
Jan Kara <[email protected]>
ext4: fix crash during online resizing
Arnd Bergmann <[email protected]>
cpufreq: pxa2xx: remove incorrect __init annotation
Yangtao Li <[email protected]>
cpufreq: tegra124: add missing of_node_put()
Eric Biggers <[email protected]>
crypto: pcbc - remove bogus memcpy()s with src == dest
Filipe Manana <[email protected]>
Btrfs: fix corruption reading shared and compressed extents after hole punching
Johannes Thumshirn <[email protected]>
btrfs: ensure that a DUP or RAID1 block group has exactly two stripes
Finn Thain <[email protected]>
m68k: Add -ffreestanding to CFLAGS
Bart Van Assche <[email protected]>
scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlock
Felipe Franciosi <[email protected]>
scsi: virtio_scsi: don't send sc payload with tmfs
Halil Pasic <[email protected]>
s390/virtio: handle find on invalid queue gracefully
Stuart Menefy <[email protected]>
clocksource/drivers/exynos_mct: Clear timer interrupt when shutdown
Stuart Menefy <[email protected]>
clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISR
Stuart Menefy <[email protected]>
regulator: s2mpa01: Fix step values for some LDOs
Krzysztof Kozlowski <[email protected]>
regulator: s2mps11: Fix steps for buck7, buck8 and LDO35
Andy Shevchenko <[email protected]>
ACPI / device_sysfs: Avoid OF modalias creation for removed device
zhangyi (F) <[email protected]>
tracing: Do not free iter->trace in fail path of tracing_open_pipe()
Pavel Shilovsky <[email protected]>
CIFS: Fix read after write for files with read caching
Ard Biesheuvel <[email protected]>
crypto: arm64/aes-ccm - fix logical bug in AAD MAC handling
Alexander Shishkin <[email protected]>
stm class: Prevent division by zero
Darrick J. Wong <[email protected]>
tmpfs: fix uninitialized return value in shmem_link
Mao Wenan <[email protected]>
net: set static variable an initial value in atl2_probe()
Li RongQing <[email protected]>
mac80211_hwsim: propagate genlmsg_reply return code
Arnd Bergmann <[email protected]>
phonet: fix building with clang
Vineet Gupta <[email protected]>
ARC: uacces: remove lp_start, lp_end from clobber list
Darrick J. Wong <[email protected]>
tmpfs: fix link accounting when a tmpfile is linked in
Vladimir Murzin <[email protected]>
arm64: Relax GIC version check during early boot
Bard liao <[email protected]>
ASoC: topology: free created components in tplg load error
Alexey Khoroshilov <[email protected]>
net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
Martin Blumenstingl <[email protected]>
pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
Florian Fainelli <[email protected]>
net: systemport: Fix reception of BPDUs
Anoob Soman <[email protected]>
scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
David Howells <[email protected]>
assoc_array: Fix shortcut creation
Dietmar Eggemann <[email protected]>
ARM: 8824/1: fix a migrating irq bug when hotplug cpu
Gabriel Fernandez <[email protected]>
Input: st-keyscan - fix potential zalloc NULL dereference
Shubhrajyoti Datta <[email protected]>
i2c: cadence: Fix the hold bit setting
Dmitry Torokhov <[email protected]>
Input: matrix_keypad - use flush_delayed_work()
Yizhuo <[email protected]>
ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
Stefan Haberland <[email protected]>
s390/dasd: fix using offset into zero size array error
Steve Longerbeam <[email protected]>
gpu: ipu-v3: Fix CSI offsets for imx53
Alexander Shiyan <[email protected]>
gpu: ipu-v3: Fix i.MX51 CSI control registers offset
Eric Biggers <[email protected]>
crypto: ahash - fix another early termination in hash walk
Pankaj Gupta <[email protected]>
crypto: caam - fixed handling of sg list
Zhi Jin <[email protected]>
stm class: Fix an endless loop in channel allocation
S.j. Wang <[email protected]>
ASoC: fsl_esai: fix register setting issue in RIGHT_J mode
zhengbin <[email protected]>
9p/net: fix memory leak in p9_client_create
Hou Tao <[email protected]>
9p: use inode->i_lock to protect i_size_write() under 32-bit
Hans Verkuil <[email protected]>
media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()
Xiao Ni <[email protected]>
It's wrong to add len to sector_nr in raid10 reshape twice
Sasha Levin <[email protected]>
fs/9p: use fscache mutex rather than spinlock
Takashi Sakamoto <[email protected]>
ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56
Eric Dumazet <[email protected]>
tcp/dccp: remove reqsk_put() from inet_child_forget()
Eric Dumazet <[email protected]>
gro_cells: make sure device is up in gro_cells_receive()
Eric Dumazet <[email protected]>
net/hsr: fix possible crash in add_timer()
Stefano Brivio <[email protected]>
vxlan: Fix GRO cells race condition between receive and link delete
Eric Dumazet <[email protected]>
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
Daniel Borkmann <[email protected]>
ipvlan: disallow userns cap_net_admin to change global mode/flags
Al Viro <[email protected]>
missing barriers in some of unix_sock ->addr and ->path accesses
Kalash Nainwal <[email protected]>
net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
YueHaibing <[email protected]>
mdio_bus: Fix use-after-free on device_register fails
Eric Dumazet <[email protected]>
net/x25: fix a race in x25_bind()
Jack Morgenstein <[email protected]>
net/mlx4_core: Fix qp mtt size calculation
Jack Morgenstein <[email protected]>
net/mlx4_core: Fix reset flow when in command polling mode
Guillaume Nault <[email protected]>
tcp: handle inet_csk_reqsk_queue_add() failures
Xin Long <[email protected]>
route: set the deleted fnhe fnhe_daddr to 0 in ip_del_fnhe to fix a race
Masaru Nagai <[email protected]>
ravb: Decrease TxFIFO depth of Q3 and Q2 to one
Xin Long <[email protected]>
pptp: dst_release sk_dst_cache in pptp_sock_destruct
Eric Dumazet <[email protected]>
net/x25: reset state in x25_connect()
Eric Dumazet <[email protected]>
net/x25: fix use-after-free in x25_device_event()
Miaohe Lin <[email protected]>
net: sit: fix UBSAN Undefined behaviour in check_6rd
Mao Wenan <[email protected]>
net: hsr: fix memory leak in hsr_dev_finalize()
Eric Dumazet <[email protected]>
l2tp: fix infoleak in l2tp_ip6_recvmsg()
Eric Biggers <[email protected]>
KEYS: restrict /proc/keys by credentials at open time
Jozsef Kadlecsik <[email protected]>
netfilter: nf_conntrack_tcp: Fix stack out of bounds when parsing TCP options
Phil Turnbull <[email protected]>
netfilter: nfnetlink_acct: validate NFACCT_FILTER parameters
Ken-ichirou MATSUZAWA <[email protected]>
netfilter: nfnetlink_log: just returns error for unknown command
Pablo Neira Ayuso <[email protected]>
netfilter: x_tables: enforce nul-terminated table name from getsockopt GET_ENTRIES
Eric Dumazet <[email protected]>
udplite: call proper backlog handlers
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420
Sasha Levin <[email protected]>
Revert "x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls"
Marek Szyprowski <[email protected]>
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
Peter Zijlstra <[email protected]>
futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
Gustavo A. R. Silva <[email protected]>
iscsi_ibft: Fix missing break in switch statement
Vincent Batts <[email protected]>
Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
Jason Gerecke <[email protected]>
Input: wacom_serial4 - add support for Wacom ArtPad II tablet
Jun-Ru Chang <[email protected]>
MIPS: Remove function size check in get_frame_info()
Jiri Olsa <[email protected]>
perf symbols: Filter out hidden symbols from labels
Julian Wiedmann <[email protected]>
s390/qeth: fix use-after-free in error path
Andy Shevchenko <[email protected]>
dmaengine: dmatest: Abort test in case of mapping error
Codrin Ciubotariu <[email protected]>
dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
Lubomir Rintel <[email protected]>
irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable
Peng Hao <[email protected]>
ARM: pxa: ssp: unneeded to free devm_ allocated data
Ian Kent <[email protected]>
autofs: fix error return in autofs_fill_super()
Pan Bian <[email protected]>
autofs: drop dentry reference only when it is never used
Jan Kara <[email protected]>
fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
Mikhail Zaslonko <[email protected]>
mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone
Michal Hocko <[email protected]>
mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone
Qian Cai <[email protected]>
x86_64: increase stack size for KASAN_EXTRA
Kairui Song <[email protected]>
x86/kexec: Don't setup EFI info if EFI runtime is not enabled
Ronnie Sahlberg <[email protected]>
cifs: fix computation for MAX_SMB2_HDR_SIZE
Sinan Kaya <[email protected]>
platform/x86: Fix unmet dependency warning for SAMSUNG_Q10
Ming Lu <[email protected]>
scsi: libfc: free skb when receiving invalid flogi resp
Yao Liu <[email protected]>
nfs: Fix NULL pointer dereference of dev_name
Andrew Lunn <[email protected]>
gpio: vf610: Mask all GPIO interrupts
Alexey Khoroshilov <[email protected]>
net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()
Yonglong Liu <[email protected]>
net: hns: Fix wrong read accesses via Clause 45 MDIO protocol
Tomonori Sakita <[email protected]>
net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case
Max Filippov <[email protected]>
xtensa: SMP: limit number of possible CPUs by NR_CPUS
Max Filippov <[email protected]>
xtensa: SMP: mark each possible CPU as present
Max Filippov <[email protected]>
xtensa: smp_lx200_defconfig: fix vectors clash
Max Filippov <[email protected]>
xtensa: SMP: fix secondary CPU initialization
Max Filippov <[email protected]>
xtensa: SMP: fix ccount_timer_shutdown
Suravee Suthikulpanit <[email protected]>
iommu/amd: Fix IOMMU page flush when detach device from a domain
ZhangXiaoxu <[email protected]>
ipvs: Fix signed integer overflow when setsockopt timeout
Brian Welty <[email protected]>
IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM
Stephane Eranian <[email protected]>
perf tools: Handle TOPOLOGY headers with no CPU
Su Yanjun <[email protected]>
vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel
Alistair Strachan <[email protected]>
media: uvcvideo: Fix 'type' check leading to overflow
Ido Schimmel <[email protected]>
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
Andrew Lunn <[email protected]>
net: dsa: mv88e6xxx: Fix u64 statistics
Paul Moore <[email protected]>
netlabel: fix out-of-bounds memory accesses
Mike Kravetz <[email protected]>
hugetlbfs: fix races and page leaks during migration
Liu Xiang <[email protected]>
MIPS: irq: Allocate accurate order pages for irq stack
Gustavo A. R. Silva <[email protected]>
applicom: Fix potential Spectre v1 vulnerabilities
Jiaxun Yang <[email protected]>
x86/CPU/AMD: Set the CPB bit unconditionally on F17h
Rajasingh Thavamani <[email protected]>
net: phy: Micrel KSZ8061: link failure after cable connect
Nazarov Sergey <[email protected]>
net: avoid use IPCB in cipso_v4_error
Nazarov Sergey <[email protected]>
net: Add __icmp_send helper.
Igor Druzhinin <[email protected]>
xen-netback: fix occasional leak of grant ref mappings under memory pressure
YueHaibing <[email protected]>
net: nfc: Fix NULL dereference on nfc_llcp_build_tlv fails
Michael Chan <[email protected]>
bnxt_en: Drop oversize TX packets to prevent errors.
Ido Schimmel <[email protected]>
team: Free BPF filter when unregistering netdev
Kai-Heng Feng <[email protected]>
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
YueHaibing <[email protected]>
net-sysfs: Fix mem leak in netdev_register_kobject
Dmitry Eremin <[email protected]>
staging: lustre: fix buffer overflow of string buffer
Greg Kroah-Hartman <[email protected]>
isdn: isdn_tty: fix build warning of strncpy
Greg Kroah-Hartman <[email protected]>
ncpfs: fix build warning of strncpy
Andreas Gruenbacher <[email protected]>
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
Viresh Kumar <[email protected]>
cpufreq: Use struct kobj_attribute instead of struct global_attr
Mans Rullgard <[email protected]>
USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485
Ivan Mironov <[email protected]>
USB: serial: cp210x: add ID for Ingenico 3070
Daniele Palmas <[email protected]>
USB: serial: option: add Telit ME910 ECM composition
Andy Lutomirski <[email protected]>
x86/uaccess: Don't leak the AC flag into __put_user() value evaluation
Jann Horn <[email protected]>
mm: enforce min addr even if capable() in expand_downwards()
Jonathan Neuschäfer <[email protected]>
mmc: spi: Fix card detection during probe
Seth Forshee <[email protected]>
powerpc: Always initialize input array when calling epapr_hypercall()
Christoffer Dall <[email protected]>
KVM: arm/arm64: Fix MMIO emulation data handling
Marc Zyngier <[email protected]>
arm/arm64: KVM: Feed initialized memory to MMIO accesses
Vitaly Kuznetsov <[email protected]>
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
Chaitanya Tata <[email protected]>
cfg80211: extend range deviation for DMG
Balaji Pothunoori <[email protected]>
mac80211: don't initiate TDLS connection if station is not associated to AP
Thomas Falcon <[email protected]>
ibmveth: Do not process frames after calling napi_reschedule
Atsushi Nemoto <[email protected]>
net: altera_tse: fix connect_local_phy error path
Varun Prakash <[email protected]>
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
Tomonori Sakita <[email protected]>
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
Bob Copeland <[email protected]>
mac80211: fix miscounting of ttl-dropped frames
Eugeniy Paltsev <[email protected]>
ARC: fix __ffs return value to avoid build warnings
Silvio Cesare <[email protected]>
ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
Silvio Cesare <[email protected]>
ASoC: dapm: change snprintf to scnprintf for possible overflow
Dan Carpenter <[email protected]>
usb: gadget: Potential NULL dereference on allocation error
Zeng Tao <[email protected]>
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
Dan Carpenter <[email protected]>
thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
Dan Carpenter <[email protected]>
ALSA: compress: prevent potential divide by zero bugs
Rander Wang <[email protected]>
ASoC: Intel: Haswell/Broadwell: fix setting for .dynamic field
Kristian H. Kristensen <[email protected]>
drm/msm: Unblock writer if reader closes file
John Garry <[email protected]>
scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached
Ilya Dryomov <[email protected]>
libceph: handle an empty authorize reply
Hangbin Liu <[email protected]>
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
Eugeniy Paltsev <[email protected]>
ARCv2: Enable unaligned access in early ASM code
Saeed Mahameed <[email protected]>
net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames
Hangbin Liu <[email protected]>
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
Cong Wang <[email protected]>
team: avoid complex list operations in team_nl_cmd_options_set()
Kal Conley <[email protected]>
net/packet: fix 4gb buffer limit due to overflow check
Eric Dumazet <[email protected]>
batman-adv: fix uninit-value in batadv_interface_tx()
Eric Biggers <[email protected]>
KEYS: always initialize keyring_index_key::desc_len
Eric Biggers <[email protected]>
KEYS: user: Align the payload buffer
Bart Van Assche <[email protected]>
RDMA/srp: Rework SCSI device reset handling
Nathan Chancellor <[email protected]>
isdn: avm: Fix string plus integer warning from Clang
Kangjie Lu <[email protected]>
leds: lp5523: fix a missing check of return value of lp55xx_read
Colin Ian King <[email protected]>
atm: he: fix sign-extension overflow on large shift
Jia-Ju Bai <[email protected]>
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
Thomas Bogendoerfer <[email protected]>
MIPS: jazz: fix 64bit build
Logan Gunthorpe <[email protected]>
scsi: isci: initialize shost fully before calling scsi_add_host()
YueHaibing <[email protected]>
scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
Alban Bedel <[email protected]>
MIPS: ath79: Enable OF serial ports in the default config
Yonglong Liu <[email protected]>
net: hns: Fix use after free identified by SLUB debug
Kangjie Lu <[email protected]>
mfd: mc13xxx: Fix a missing check of a register-read failure
Charles Keepax <[email protected]>
mfd: wm5110: Add missing ASRC rate register
Jonathan Marek <[email protected]>
mfd: qcom_rpm: write fw_version to CTRL_REG
Dan Carpenter <[email protected]>
mfd: ab8500-core: Return zero in get_register_interruptible()
Nathan Chancellor <[email protected]>
mfd: db8500-prcmu: Fix some section annotations
Nathan Chancellor <[email protected]>
mfd: twl-core: Fix section annotations on {,un}protect_pm_master
Vignesh R <[email protected]>
mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
Eric Biggers <[email protected]>
KEYS: allow reaching the keys quotas exactly
Ralph Campbell <[email protected]>
numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES
Yan, Zheng <[email protected]>
ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
-------------
Diffstat:
Makefile | 4 +-
arch/arc/include/asm/bitops.h | 6 +-
arch/arc/include/asm/uaccess.h | 8 +-
arch/arc/kernel/head.S | 10 +
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/exynos3250.dtsi | 3 +
arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 25 ++
arch/arm/boot/dts/exynos5420.dtsi | 10 +-
arch/arm/include/asm/irq.h | 1 -
arch/arm/kernel/irq.c | 62 ----
arch/arm/kernel/smp.c | 2 +-
arch/arm/kvm/mmio.c | 10 +-
arch/arm/mach-omap2/display.c | 7 +-
arch/arm/mach-s3c24xx/mach-osiris-dvs.c | 8 +-
arch/arm/plat-pxa/ssp.c | 3 -
arch/arm64/crypto/aes-ce-ccm-core.S | 5 +-
arch/arm64/kernel/head.S | 3 +-
arch/m68k/Makefile | 5 +-
arch/mips/configs/ath79_defconfig | 1 +
arch/mips/jazz/jazzdma.c | 5 +-
arch/mips/kernel/irq.c | 4 +-
arch/mips/kernel/process.c | 7 +-
arch/powerpc/include/asm/epapr_hcalls.h | 12 +-
arch/powerpc/kernel/entry_32.S | 9 +
arch/powerpc/platforms/83xx/suspend-asm.S | 34 ++-
arch/powerpc/platforms/embedded6xx/wii.c | 4 +
arch/powerpc/platforms/powernv/opal-msglog.c | 2 +-
arch/x86/include/asm/page_64_types.h | 4 +
arch/x86/include/asm/uaccess.h | 7 +-
arch/x86/include/asm/uv/bios.h | 8 +-
arch/x86/kernel/cpu/amd.c | 8 +-
arch/x86/kernel/kexec-bzimage64.c | 3 +
arch/x86/kvm/svm.c | 8 +
arch/x86/kvm/vmx.c | 17 +-
arch/x86/kvm/x86.c | 1 +
arch/x86/platform/uv/bios_uv.c | 23 +-
arch/xtensa/configs/smp_lx200_defconfig | 1 +
arch/xtensa/kernel/head.S | 5 +-
arch/xtensa/kernel/smp.c | 41 ++-
arch/xtensa/kernel/time.c | 2 +-
crypto/ahash.c | 14 +-
crypto/pcbc.c | 14 +-
drivers/acpi/device_sysfs.c | 6 +-
drivers/atm/he.c | 2 +-
drivers/base/power/wakeup.c | 8 +-
drivers/char/applicom.c | 35 ++-
drivers/clk/ingenic/cgu.c | 10 +-
drivers/clocksource/exynos_mct.c | 23 +-
drivers/cpufreq/cpufreq.c | 6 +-
drivers/cpufreq/cpufreq_governor.h | 10 +-
drivers/cpufreq/intel_pstate.c | 14 +-
drivers/cpufreq/pxa2xx-cpufreq.c | 4 +-
drivers/cpufreq/tegra124-cpufreq.c | 2 +
drivers/crypto/caam/caamalg.c | 1 +
drivers/dma/at_xdmac.c | 19 +-
drivers/dma/dmatest.c | 28 +-
drivers/dma/sh/usb-dmac.c | 2 +
drivers/firmware/efi/runtime-wrappers.c | 7 -
drivers/firmware/iscsi_ibft.c | 1 +
drivers/gpio/gpio-vf610.c | 5 +
drivers/gpu/drm/msm/msm_rd.c | 7 +-
drivers/gpu/drm/radeon/evergreen_cs.c | 1 +
drivers/gpu/ipu-v3/ipu-common.c | 8 +-
drivers/hwtracing/intel_th/gth.c | 4 +
drivers/hwtracing/stm/core.c | 11 +-
drivers/i2c/busses/i2c-cadence.c | 9 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
drivers/infiniband/hw/qib/qib_ud.c | 1 -
drivers/infiniband/ulp/srp/ib_srp.c | 10 -
drivers/input/keyboard/matrix_keypad.c | 2 +-
drivers/input/keyboard/st-keyscan.c | 4 +-
drivers/input/mouse/elan_i2c_core.c | 1 +
drivers/input/tablet/wacom_serial4.c | 2 +
drivers/iommu/amd_iommu.c | 15 +-
drivers/irqchip/irq-mmp.c | 6 +-
drivers/isdn/hardware/avm/b1.c | 2 +-
drivers/isdn/i4l/isdn_tty.c | 8 +-
drivers/leds/leds-lp5523.c | 4 +-
drivers/md/raid10.c | 3 +-
drivers/md/raid5.c | 2 +
drivers/media/usb/uvc/uvc_driver.c | 14 +-
drivers/media/usb/uvc/uvc_video.c | 8 +
drivers/media/v4l2-core/videobuf2-v4l2.c | 1 -
drivers/mfd/ab8500-core.c | 2 +-
drivers/mfd/db8500-prcmu.c | 4 +-
drivers/mfd/mc13xxx-core.c | 4 +-
drivers/mfd/qcom_rpm.c | 4 +
drivers/mfd/ti_am335x_tscadc.c | 5 +-
drivers/mfd/twl-core.c | 4 +-
drivers/mfd/wm5110-tables.c | 2 +
drivers/mmc/host/mmc_spi.c | 1 +
drivers/net/dsa/mv88e6xxx.c | 2 +-
drivers/net/ethernet/altera/altera_msgdma.c | 3 +-
drivers/net/ethernet/altera/altera_tse_main.c | 4 +-
drivers/net/ethernet/atheros/atlx/atl2.c | 4 +-
drivers/net/ethernet/broadcom/bcmsysport.c | 4 +
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 +-
drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +-
drivers/net/ethernet/ibm/ibmveth.c | 2 -
drivers/net/ethernet/marvell/mv643xx_eth.c | 7 +-
drivers/net/ethernet/marvell/sky2.c | 24 +-
drivers/net/ethernet/mellanox/mlx4/cmd.c | 1 +
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 23 +-
.../net/ethernet/mellanox/mlx4/resource_tracker.c | 6 +-
drivers/net/ethernet/renesas/ravb_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 +-
drivers/net/ipvlan/ipvlan_main.c | 9 +-
drivers/net/phy/mdio_bus.c | 1 -
drivers/net/phy/micrel.c | 14 +-
drivers/net/ppp/pptp.c | 1 +
drivers/net/team/team.c | 27 +-
drivers/net/team/team_mode_loadbalance.c | 15 +
drivers/net/vxlan.c | 13 +-
drivers/net/wireless/mac80211_hwsim.c | 2 +-
drivers/net/xen-netback/netback.c | 10 +-
drivers/parport/parport_pc.c | 2 +-
drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
drivers/platform/x86/Kconfig | 1 +
drivers/regulator/s2mpa01.c | 10 +-
drivers/regulator/s2mps11.c | 6 +-
drivers/s390/block/dasd_eckd.c | 8 +
drivers/s390/net/qeth_core_main.c | 15 +-
drivers/s390/virtio/virtio_ccw.c | 4 +-
drivers/scsi/csiostor/csio_attr.c | 2 +-
drivers/scsi/isci/init.c | 14 +-
drivers/scsi/libfc/fc_lport.c | 6 +-
drivers/scsi/libiscsi.c | 6 +
drivers/scsi/libsas/sas_expander.c | 2 +
drivers/scsi/qla4xxx/ql4_os.c | 2 +
drivers/scsi/virtio_scsi.c | 2 -
.../staging/lustre/lnet/klnds/socklnd/socklnd.c | 9 +-
drivers/staging/lustre/lnet/lnet/config.c | 14 +-
drivers/staging/lustre/lnet/selftest/conrpc.c | 4 +-
drivers/staging/lustre/lnet/selftest/console.c | 6 +-
.../staging/lustre/lustre/include/lustre_disk.h | 1 +
drivers/staging/lustre/lustre/libcfs/debug.c | 6 +-
drivers/staging/lustre/lustre/libcfs/hash.c | 3 +-
drivers/staging/lustre/lustre/libcfs/workitem.c | 4 +-
drivers/staging/lustre/lustre/llite/dir.c | 2 +-
drivers/staging/lustre/lustre/lov/lov_pool.c | 3 +-
drivers/staging/lustre/lustre/obdclass/obd_mount.c | 10 +-
drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.c | 1 +
drivers/staging/lustre/lustre/ptlrpc/sec_config.c | 3 +-
drivers/staging/rdma/hfi1/ud.c | 1 -
drivers/target/iscsi/iscsi_target.c | 4 +-
.../int340x_thermal/processor_thermal_device.c | 2 +-
drivers/tty/serial/8250/8250_pci.c | 141 +++++++--
drivers/tty/serial/fsl_lpuart.c | 2 +-
drivers/usb/dwc3/gadget.c | 1 +
drivers/usb/gadget/function/f_sourcesink.c | 2 +-
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 6 +
drivers/usb/serial/option.c | 2 +
fs/9p/cache.c | 8 +-
fs/9p/v9fs.h | 2 +-
fs/9p/v9fs_vfs.h | 23 +-
fs/9p/vfs_file.c | 6 +-
fs/9p/vfs_inode.c | 25 +-
fs/9p/vfs_inode_dotl.c | 27 +-
fs/9p/vfs_super.c | 4 +-
fs/autofs4/expire.c | 3 +-
fs/autofs4/inode.c | 4 +-
fs/btrfs/extent_io.c | 4 +-
fs/btrfs/volumes.c | 4 +-
fs/ceph/snap.c | 3 +-
fs/cifs/file.c | 12 +-
fs/cifs/smb2pdu.h | 4 +-
fs/drop_caches.c | 8 +-
fs/ext2/super.c | 39 ++-
fs/ext4/resize.c | 3 +-
fs/hugetlbfs/inode.c | 12 +
fs/jbd2/transaction.c | 33 +-
fs/ncpfs/ioctl.c | 4 +-
fs/nfs/direct.c | 15 +-
fs/nfs/filelayout/filelayout.c | 17 +-
fs/nfs/flexfilelayout/flexfilelayout.c | 25 +-
fs/nfs/pagelist.c | 12 +-
fs/nfs/pnfs.c | 24 +-
fs/nfs/read.c | 2 +-
fs/nfs/super.c | 5 +
fs/nfsd/nfs3proc.c | 16 +-
fs/nfsd/nfs3xdr.c | 1 +
fs/nfsd/nfsctl.c | 2 +-
include/keys/user-type.h | 2 +-
include/linux/cpufreq.h | 12 +-
include/linux/device-mapper.h | 2 +-
include/net/gro_cells.h | 12 +-
include/net/icmp.h | 9 +-
include/net/ip.h | 2 +
include/net/phonet/pep.h | 5 +-
kernel/futex.c | 7 +-
kernel/locking/rtmutex.c | 52 +++-
kernel/locking/rtmutex_common.h | 8 +-
kernel/rcu/tree.c | 20 +-
kernel/sysctl.c | 11 +-
kernel/trace/trace.c | 1 -
lib/assoc_array.c | 8 +-
mm/hugetlb.c | 14 +-
mm/memory_hotplug.c | 6 +-
mm/mempolicy.c | 6 +-
mm/migrate.c | 11 +
mm/mmap.c | 7 +-
mm/shmem.c | 12 +-
mm/vmalloc.c | 2 +-
net/9p/client.c | 2 +-
net/batman-adv/soft-interface.c | 2 +
net/bridge/br_multicast.c | 9 +-
net/bridge/netfilter/ebtables.c | 4 +
net/ceph/messenger.c | 12 +-
net/core/net-sysfs.c | 3 +
net/hsr/hsr_device.c | 18 +-
net/hsr/hsr_framereg.c | 12 +
net/hsr/hsr_framereg.h | 1 +
net/ipv4/cipso_ipv4.c | 23 +-
net/ipv4/icmp.c | 7 +-
net/ipv4/inet_connection_sock.c | 2 +-
net/ipv4/ip_options.c | 22 +-
net/ipv4/ip_vti.c | 50 +++
net/ipv4/netfilter/arp_tables.c | 2 +
net/ipv4/netfilter/ip_tables.c | 2 +
net/ipv4/route.c | 4 +
net/ipv4/syncookies.c | 7 +-
net/ipv4/tcp_input.c | 8 +-
net/ipv4/udp.c | 2 +-
net/ipv4/udp_impl.h | 2 +-
net/ipv4/udplite.c | 2 +-
net/ipv6/ip6mr.c | 8 +-
net/ipv6/netfilter/ip6_tables.c | 2 +
net/ipv6/route.c | 2 +-
net/ipv6/sit.c | 7 +-
net/ipv6/udp.c | 2 +-
net/ipv6/udp_impl.h | 2 +-
net/ipv6/udplite.c | 2 +-
net/l2tp/l2tp_ip6.c | 4 +-
net/mac80211/cfg.c | 4 +
net/mac80211/rx.c | 4 +-
net/netfilter/ipvs/ip_vs_ctl.c | 12 +
net/netfilter/nf_conntrack_proto_tcp.c | 4 +
net/netfilter/nfnetlink_acct.c | 3 +
net/netfilter/nfnetlink_log.c | 2 +-
net/nfc/llcp_commands.c | 20 ++
net/nfc/llcp_core.c | 24 +-
net/packet/af_packet.c | 2 +-
net/phonet/pep.c | 32 +-
net/socket.c | 24 +-
net/unix/af_unix.c | 48 +--
net/unix/diag.c | 3 +-
net/wireless/reg.c | 4 +-
net/x25/af_x25.c | 20 +-
security/keys/key.c | 4 +-
security/keys/keyring.c | 4 +-
security/keys/proc.c | 11 +-
security/keys/request_key.c | 1 +
security/keys/request_key_auth.c | 2 +-
security/lsm_audit.c | 10 +-
sound/core/compress_offload.c | 3 +-
sound/firewire/bebob/bebob.c | 14 +-
sound/soc/fsl/fsl_esai.c | 7 +-
sound/soc/fsl/imx-audmux.c | 24 +-
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
sound/soc/soc-dapm.c | 10 +-
sound/soc/soc-topology.c | 8 +-
tools/arch/x86/include/asm/cpufeatures.h | 336 +++++++++++++++++++++
tools/arch/x86/include/asm/disabled-features.h | 65 ++++
tools/arch/x86/include/asm/required-features.h | 106 +++++++
tools/arch/x86/lib/memcpy_64.S | 179 +++++++++++
tools/arch/x86/lib/memset_64.S | 138 +++++++++
.../{perf/util => }/include/asm/alternative-asm.h | 4 +-
tools/perf/MANIFEST | 8 +-
tools/perf/Makefile.perf | 15 +
tools/perf/bench/mem-memcpy-x86-64-asm.S | 2 +-
tools/perf/bench/mem-memset-x86-64-asm.S | 2 +-
tools/perf/util/auxtrace.c | 4 +-
tools/perf/util/auxtrace.h | 3 +
tools/perf/util/cpumap.c | 11 +-
.../perf/util/intel-pt-decoder/intel-pt-decoder.c | 37 ++-
tools/perf/util/symbol-elf.c | 9 +-
virt/kvm/arm/vgic.c | 7 -
281 files changed, 2463 insertions(+), 797 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]
When building the kernel with Clang, the following section mismatch
warning appears:
WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from
the function twl_probe() to the function
.init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.
Remove the __init annotation on the *protect_pm_master functions so
there is no more mismatch.
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/twl-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 831696ee2472b..90732a655d573 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -982,7 +982,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
* letting it generate the right frequencies for USB, MADC, and
* other purposes.
*/
-static inline int __init protect_pm_master(void)
+static inline int protect_pm_master(void)
{
int e = 0;
@@ -991,7 +991,7 @@ static inline int __init protect_pm_master(void)
return e;
}
-static inline int __init unprotect_pm_master(void)
+static inline int unprotect_pm_master(void)
{
int e = 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be. Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.
However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.
The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")
Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:
RIP: 0010:t10_pi_complete+0x77/0x1c0
Call Trace:
<IRQ>
sd_done+0xf5/0x340
scsi_finish_command+0xc3/0x120
blk_done_softirq+0x83/0xb0
__do_softirq+0xa1/0x2e6
irq_exit+0xbc/0xd0
call_function_single_interrupt+0xf/0x20
</IRQ>
sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().
To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().
Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Logan Gunthorpe <[email protected]>
Cc: Intel SCU Linux support <[email protected]>
Cc: Artur Paszkiewicz <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Jeff Moyer <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/isci/init.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 77128d680e3bc..6f38fa1f468a7 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -595,6 +595,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
shost->max_lun = ~0;
shost->max_cmd_len = MAX_COMMAND_SIZE;
+ /* turn on DIF support */
+ scsi_host_set_prot(shost,
+ SHOST_DIF_TYPE1_PROTECTION |
+ SHOST_DIF_TYPE2_PROTECTION |
+ SHOST_DIF_TYPE3_PROTECTION);
+ scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
err = scsi_add_host(shost, &pdev->dev);
if (err)
goto err_shost;
@@ -682,13 +689,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_host_alloc;
}
pci_info->hosts[i] = h;
-
- /* turn on DIF support */
- scsi_host_set_prot(to_shost(h),
- SHOST_DIF_TYPE1_PROTECTION |
- SHOST_DIF_TYPE2_PROTECTION |
- SHOST_DIF_TYPE3_PROTECTION);
- scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
}
err = isci_setup_interrupts(pdev);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]
A recent commit in Clang expanded the -Wstring-plus-int warning, showing
some odd behavior in this file.
drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
cinfo->version[j] = "\0\0" + 1;
~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
cinfo->version[j] = "\0\0" + 1;
^
& [ ]
1 warning generated.
This is equivalent to just "\0". Nick pointed out that it is smarter to
use "" instead of "\0" because "" is used elsewhere in the kernel and
can be deduplicated at the linking stage.
Link: https://github.com/ClangBuiltLinux/linux/issues/309
Suggested-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/avm/b1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index 4d9b195547c5c..df2a10157720a 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo)
int i, j;
for (j = 0; j < AVM_MAXVERSION; j++)
- cinfo->version[j] = "\0\0" + 1;
+ cinfo->version[j] = "";
for (i = 0, j = 0;
j < AVM_MAXVERSION && i < cinfo->versionlen;
j++, i += cinfo->versionbuf[i] + 1)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]
When lp55xx_read() fails, "status" is an uninitialized variable and thus
may contain random value; using it leads to undefined behaviors.
The fix inserts a check for the return value of lp55xx_read: if it
fails, returns with its error code.
Signed-off-by: Kangjie Lu <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/leds/leds-lp5523.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 1d0187f42941a..d12370352ae34 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -318,7 +318,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
/* Let the programs run for couple of ms and check the engine status */
usleep_range(3000, 6000);
- lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+ if (ret)
+ return ret;
status &= LP5523_ENG_STATUS_MASK;
if (status != LP5523_ENG_STATUS_MASK) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]
Signed-off-by: Charles Keepax <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/wm5110-tables.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 2bb2d0467a92d..c47efe6dcb01b 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -1622,6 +1622,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */
{ 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */
{ 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */
+ { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */
{ 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */
{ 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */
{ 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */
@@ -2877,6 +2878,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ASRC_ENABLE:
case ARIZONA_ASRC_STATUS:
case ARIZONA_ASRC_RATE1:
+ case ARIZONA_ASRC_RATE2:
case ARIZONA_ISRC_1_CTRL_1:
case ARIZONA_ISRC_1_CTRL_2:
case ARIZONA_ISRC_1_CTRL_3:
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]
This function is supposed to return zero on success or negative error
codes on error. Unfortunately, there is a bug so it sometimes returns
non-zero, positive numbers on success.
I noticed this bug during review and I can't test it. It does appear
that the return is sometimes propogated back to _regmap_read() where all
non-zero returns are treated as failure so this may affect run time.
Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/ab8500-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index fefbe4cfa61dd..1263cfd8b4d2f 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -259,7 +259,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
mutex_unlock(&ab8500->lock);
dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
- return ret;
+ return (ret < 0) ? ret : 0;
}
static int ab8500_get_register(struct device *dev, u8 bank,
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 4ffcbfac60642f63ae3d80891f573ba7e94a265c ]
KMSAN reported batadv_interface_tx() was possibly using a
garbage value [1]
batadv_get_vid() does have a pskb_may_pull() call
but batadv_interface_tx() does not actually make sure
this did not fail.
[1]
BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231
CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231
__netdev_start_xmit include/linux/netdevice.h:4356 [inline]
netdev_start_xmit include/linux/netdevice.h:4365 [inline]
xmit_one net/core/dev.c:3257 [inline]
dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273
__dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876
packet_snd net/packet/af_packet.c:2928 [inline]
packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
__sys_sendto+0x8c4/0xac0 net/socket.c:1788
__do_sys_sendto net/socket.c:1800 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1796
__x64_sys_sendto+0x6e/0x90 net/socket.c:1796
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441889
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889
RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0
R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220
sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083
packet_alloc_skb net/packet/af_packet.c:2781 [inline]
packet_snd net/packet/af_packet.c:2872 [inline]
packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
__sys_sendto+0x8c4/0xac0 net/socket.c:1788
__do_sys_sendto net/socket.c:1800 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1796
__x64_sys_sendto+0x6e/0x90 net/socket.c:1796
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Marek Lindner <[email protected]>
Cc: Simon Wunderlich <[email protected]>
Cc: Antonio Quartulli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/soft-interface.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -215,6 +215,8 @@ static int batadv_interface_tx(struct sk
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
+ if (!pskb_may_pull(skb, sizeof(*vhdr)))
+ goto dropped;
vhdr = vlan_eth_hdr(skb);
if (vhdr->h_vlan_encapsulated_proto != ethertype) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]
CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.
Signed-off-by: Alban Bedel <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/configs/ath79_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 134879c1310a0..4ed369c0ec6a1 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -74,6 +74,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AR933X=y
CONFIG_SERIAL_AR933X_CONSOLE=y
# CONFIG_HW_RANDOM is not set
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 678e2b44c8e3fec3afc7202f1996a4500a50be93 ]
The problem is seen in the q6asm_dai_compr_set_params() function:
ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys,
(prtd->pcm_size / prtd->periods),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
prtd->periods);
In this code prtd->pcm_size is the buffer_size and prtd->periods comes
from params->buffer.fragments. If we allow the number of fragments to
be zero then it results in a divide by zero bug. One possible fix would
be to use prtd->pcm_count directly instead of using the division to
re-calculate it. But I decided that it doesn't really make sense to
allow zero fragments.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 6163bf3e81776..2272aee128710 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -500,7 +500,8 @@ static int snd_compress_check_input(struct snd_compr_params *params)
{
/* first let's check the buffer parameter's */
if (params->buffer.fragment_size == 0 ||
- params->buffer.fragments > INT_MAX / params->buffer.fragment_size)
+ params->buffer.fragments > INT_MAX / params->buffer.fragment_size ||
+ params->buffer.fragments == 0)
return -EINVAL;
/* now codec parameters */
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]
When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.
Signed-off-by: Kangjie Lu <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mc13xxx-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 3f9f4c874d2aa..8d74806b83c12 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
- mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+ ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+ if (ret)
+ goto out;
adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 04242ff3ac0abbaa4362f97781dac268e6c3541a upstream.
Otherwise, mdsc->snap_flush_list may get corrupted.
Cc: [email protected]
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/snap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -611,7 +611,8 @@ int __ceph_finish_cap_snap(struct ceph_i
capsnap->size);
spin_lock(&mdsc->snap_flush_lock);
- list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
+ if (list_empty(&ci->i_snap_flush_item))
+ list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
spin_unlock(&mdsc->snap_flush_lock);
return 1; /* caller may want to ceph_flush_snaps */
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e581e151e965bf1f2815dd94620b638fec4d0a7e ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-dapm.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 0aefed8ab0cf5..7e26d173da41c 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1943,19 +1943,19 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
out = is_connected_output_ep(w, NULL);
}
- ret = snprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
+ ret = scnprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
w->name, w->power ? "On" : "Off",
w->force ? " (forced)" : "", in, out);
if (w->reg >= 0)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" - R%d(0x%x) mask 0x%x",
w->reg, w->reg, w->mask << w->shift);
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (w->sname)
- ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
w->sname,
w->active ? "active" : "inactive");
@@ -1968,7 +1968,7 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
if (!p->connect)
continue;
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" %s \"%s\" \"%s\"\n",
(rdir == SND_SOC_DAPM_DIR_IN) ? "in" : "out",
p->name ? p->name : "static",
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ]
Currently the link_state is uninitialized and the default value is 0(U0)
before the first time we start the udc, and after we start the udc then
stop the udc, the link_state will be undefined.
We may have the following warnings if we start the udc again with
an undefined link_state:
WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308
dwc3 100e0000.hidwc3_0: wakeup failed --> -22
[...]
Call Trace:
[<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14)
[<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98)
[<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100)
[<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48)
[<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308)
[<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4)
[<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80)
[<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278)
[<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c)
[<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc)
[<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140)
[<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite])
[<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160)
[<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114)
[<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168)
[<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90)
[<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Zeng Tao <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b6037a0ae829b..557f08adf644e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1676,6 +1676,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
/* begin to receive SETUP packets */
dwc->ep0state = EP0_SETUP_PHASE;
+ dwc->link_state = DWC3_LINK_STATE_SS_DIS;
dwc3_ep0_out_start(dwc);
dwc3_gadget_enable_irq(dwc);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit a08bf91ce28ed3ae7b6fef35d843fef8dc8c2cd9 upstream.
If the sysctl 'kernel.keys.maxkeys' is set to some number n, then
actually users can only add up to 'n - 1' keys. Likewise for
'kernel.keys.maxbytes' and the root_* versions of these sysctls. But
these sysctls are apparently supposed to be *maximums*, as per their
names and all documentation I could find -- the keyrings(7) man page,
Documentation/security/keys/core.rst, and all the mentions of EDQUOT
meaning that the key quota was *exceeded* (as opposed to reached).
Thus, fix the code to allow reaching the quotas exactly.
Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/key.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -260,8 +260,8 @@ struct key *key_alloc(struct key_type *t
spin_lock(&user->lock);
if (!(flags & KEY_ALLOC_QUOTA_OVERRUN)) {
- if (user->qnkeys + 1 >= maxkeys ||
- user->qnbytes + quotalen >= maxbytes ||
+ if (user->qnkeys + 1 > maxkeys ||
+ user->qnbytes + quotalen > maxbytes ||
user->qnbytes + quotalen < user->qnbytes)
goto no_quota;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c407cd008fd039320d147088b52d0fa34ed3ddcb ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-audmux.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index fc57da341d610..136df38c4536c 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -86,49 +86,49 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
if (!buf)
return -ENOMEM;
- ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+ ret = scnprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
pdcr, ptcr);
if (ptcr & IMX_AUDMUX_V2_PTCR_TFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS output from %s, ",
audmux_port_string((ptcr >> 27) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_TCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk output from %s",
audmux_port_string((ptcr >> 22) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk input");
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (ptcr & IMX_AUDMUX_V2_PTCR_SYN) {
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"Port is symmetric");
} else {
if (ptcr & IMX_AUDMUX_V2_PTCR_RFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS output from %s, ",
audmux_port_string((ptcr >> 17) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_RCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk output from %s",
audmux_port_string((ptcr >> 12) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk input");
}
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"\nData received from %s\n",
audmux_port_string((pdcr >> 13) & 0x7));
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Garry <[email protected]>
commit ffeafdd2bf0b280d67ec1a47ea6287910d271f3f upstream.
The sysfs phy_identifier attribute for a sas_end_device comes from the rphy
phy_identifier value.
Currently this is not being set for rphys with an end device attached, so
we see incorrect symlinks from systemd disk/by-path:
root@localhost:~# ls -l /dev/disk/by-path/
total 0
lrwxrwxrwx 1 root root 9 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part3 -> ../../sdc3
Indeed, each sas_end_device phy_identifier value is 0:
root@localhost:/# more sys/class/sas_device/end_device-0\:0\:2/phy_identifier
0
root@localhost:/# more sys/class/sas_device/end_device-0\:0\:10/phy_identifier
0
This patch fixes the discovery code to set the phy_identifier. With this,
we now get proper symlinks:
root@localhost:~# ls -l /dev/disk/by-path/
total 0
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy10-lun-0 -> ../../sdg
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy11-lun-0 -> ../../sdh
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part3 -> ../../sdc3
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy5-lun-0 -> ../../sdd
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0 -> ../../sde
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part1 -> ../../sde1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part2 -> ../../sde2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part3 -> ../../sde3
lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0 -> ../../sdf
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part1 -> ../../sdf1
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part2 -> ../../sdf2
lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part3 -> ../../sdf3
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: dann frazier <[email protected]>
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Tested-by: dann frazier <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -818,6 +818,7 @@ static struct domain_device *sas_ex_disc
rphy = sas_end_device_alloc(phy->port);
if (!rphy)
goto out_free;
+ rphy->identify.phy_identifier = phy_id;
child->rphy = rphy;
get_device(&rphy->dev);
@@ -845,6 +846,7 @@ static struct domain_device *sas_ex_disc
child->rphy = rphy;
get_device(&rphy->dev);
+ rphy->identify.phy_identifier = phy_id;
sas_fill_in_rphy(child, rphy);
list_add_tail(&child->disco_list_node, &parent->port->disco_list);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]
The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.
isdn_tty_tiocmset
isdn_tty_modem_hup
line 719: kfree(info->dtmf_state);
line 721: kfree(info->silence_state);
line 723: kfree(info->adpcms);
line 725: kfree(info->adpcmr);
isdn_tty_set_termios
isdn_tty_modem_hup
line 719: kfree(info->dtmf_state);
line 721: kfree(info->silence_state);
line 723: kfree(info->adpcms);
line 725: kfree(info->adpcmr);
Thus, some concurrency double-free bugs may occur.
These possible bugs are found by a static tool written by myself and
my manual code review.
To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/i4l/isdn_tty.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 2175225af7421..8291e9cc949ad 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1459,15 +1459,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
modem_info *info = (modem_info *) tty->driver_data;
+ mutex_lock(&modem_info_mutex);
if (!old_termios)
isdn_tty_change_speed(info);
else {
if (tty->termios.c_cflag == old_termios->c_cflag &&
tty->termios.c_ispeed == old_termios->c_ispeed &&
- tty->termios.c_ospeed == old_termios->c_ospeed)
+ tty->termios.c_ospeed == old_termios->c_ospeed) {
+ mutex_unlock(&modem_info_mutex);
return;
+ }
isdn_tty_change_speed(info);
}
+ mutex_unlock(&modem_info_mutex);
}
/*
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit 173656accaf583698bac3f9e269884ba60d51ef4 ]
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:
ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
ip link set sit1 up
ip addr add 198.51.100.1/24 dev sit1
ping 198.51.100.2
if IPv6 is disabled at boot time, will crash the kernel.
v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
as we only need to check that idev exists and we are under
rcu_read_lock() (from netif_receive_skb_internal()).
Reported-by: Jianlin Shi <[email protected]>
Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -577,7 +577,7 @@ static int ipip6_err(struct sk_buff *skb
goto out;
err = 0;
- if (!ipip6_err_gen_icmpv6_unreach(skb))
+ if (__in6_dev_get(skb->dev) && !ipip6_err_gen_icmpv6_unreach(skb))
goto out;
if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit ede0fa98a900e657d1fcd80b50920efc896c1a4c upstream.
syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin()
called from construct_alloc_key() during sys_request_key(), because the
length of the key description was never calculated.
The problem is that we rely on ->desc_len being initialized by
search_process_keyrings(), specifically by search_nested_keyrings().
But, if the process isn't subscribed to any keyrings that never happens.
Fix it by always initializing keyring_index_key::desc_len as soon as the
description is set, like we already do in some places.
The following program reproduces the BUG_ON() when it's run as root and
no session keyring has been installed. If it doesn't work, try removing
pam_keyinit.so from /etc/pam.d/login and rebooting.
#include <stdlib.h>
#include <unistd.h>
#include <keyutils.h>
int main(void)
{
int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING);
keyctl_setperm(id, KEY_OTH_WRITE);
setreuid(5000, 5000);
request_key("user", "desc", "", id);
}
Reported-by: [email protected]
Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Cc: [email protected]
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/keyring.c | 4 +---
security/keys/proc.c | 3 +--
security/keys/request_key.c | 1 +
security/keys/request_key_auth.c | 2 +-
4 files changed, 4 insertions(+), 6 deletions(-)
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -628,9 +628,6 @@ static bool search_nested_keyrings(struc
BUG_ON((ctx->flags & STATE_CHECKS) == 0 ||
(ctx->flags & STATE_CHECKS) == STATE_CHECKS);
- if (ctx->index_key.description)
- ctx->index_key.desc_len = strlen(ctx->index_key.description);
-
/* Check to see if this top-level keyring is what we are looking for
* and whether it is valid or not.
*/
@@ -888,6 +885,7 @@ key_ref_t keyring_search(key_ref_t keyri
struct keyring_search_context ctx = {
.index_key.type = type,
.index_key.description = description,
+ .index_key.desc_len = strlen(description),
.cred = current_cred(),
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -186,8 +186,7 @@ static int proc_keys_show(struct seq_fil
int rc;
struct keyring_search_context ctx = {
- .index_key.type = key->type,
- .index_key.description = key->description,
+ .index_key = key->index_key,
.cred = current_cred(),
.match_data.cmp = lookup_user_key_possessed,
.match_data.raw_data = key,
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -544,6 +544,7 @@ struct key *request_key_and_link(struct
struct keyring_search_context ctx = {
.index_key.type = type,
.index_key.description = description,
+ .index_key.desc_len = strlen(description),
.cred = current_cred(),
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -254,7 +254,7 @@ struct key *key_get_instantiation_authke
struct key *authkey;
key_ref_t authkey_ref;
- sprintf(description, "%x", target_id);
+ ctx.index_key.desc_len = sprintf(description, "%x", target_id);
authkey_ref = search_process_keyrings(&ctx);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit cc1780fc42c76c705dd07ea123f1143dc5057630 upstream.
Align the payload of "user" and "logon" keys so that users of the
keyrings service can access it as a struct that requires more than
2-byte alignment. fscrypt currently does this which results in the read
of fscrypt_key::size being misaligned as it needs 4-byte alignment.
Align to __alignof__(u64) rather than __alignof__(long) since in the
future it's conceivable that people would use structs beginning with
u64, which on some platforms would require more than 'long' alignment.
Reported-by: Aaro Koskinen <[email protected]>
Fixes: 2aa349f6e37c ("[PATCH] Keys: Export user-defined keyring operations")
Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/keys/user-type.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/keys/user-type.h
+++ b/include/keys/user-type.h
@@ -31,7 +31,7 @@
struct user_key_payload {
struct rcu_head rcu; /* RCU destructor */
unsigned short datalen; /* length of this data */
- char data[0]; /* actual data */
+ char data[0] __aligned(__alignof__(u64)); /* actual data */
};
extern struct key_type key_type_user;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonathan Neuschäfer <[email protected]>
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream.
When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).
The call tree looks something like this:
mmc_spi_probe
mmc_add_host
mmc_start_host
_mmc_detect_change
mmc_schedule_delayed_work(&host->detect, 0)
mmc_rescan
host->bus_ops->detect(host)
mmc_detect
_mmc_detect_card_removed
host->ops->get_cd(host)
mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
mmc_gpiod_request_cd
ctx->cd_gpio = desc
To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/mmc_spi.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1451,6 +1451,7 @@ static int mmc_spi_probe(struct spi_devi
if (status != 0)
goto fail_add_host;
}
+ mmc_detect_change(mmc, 0);
dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n",
dev_name(&mmc->class_dev),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]
The return code should be check while qla4xxx_copy_from_fwddb_param fails.
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla4xxx/ql4_os.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d8c03431d0aa8..f9f899ec94270 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -7245,6 +7245,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha,
rc = qla4xxx_copy_from_fwddb_param(fnode_sess, fnode_conn,
fw_ddb_entry);
+ if (rc)
+ goto free_sess;
ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
__func__, fnode_sess->dev.kobj.name);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 906a9abc5de73c383af518f5a806f4be2993a0c7 ]
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.
Signed-off-by: Rander Wang <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index 3f8a1e10bed02..e5ca41ffa8908 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -191,7 +191,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
diff --git a/sound/soc/intel/boards/haswell.c b/sound/soc/intel/boards/haswell.c
index 22558572cb9ca..de955c2e8c4e3 100644
--- a/sound/soc/intel/boards/haswell.c
+++ b/sound/soc/intel/boards/haswell.c
@@ -145,7 +145,7 @@ static struct snd_soc_dai_link haswell_rt5640_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ]
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().
ln->fc_vport is dereferenced in csio_vport_set_state().
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_attr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c
index 2d1c4ebd40f91..6587f20cff1a1 100644
--- a/drivers/scsi/csiostor/csio_attr.c
+++ b/drivers/scsi/csiostor/csio_attr.c
@@ -582,12 +582,12 @@ csio_vport_create(struct fc_vport *fc_vport, bool disable)
}
fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING);
+ ln->fc_vport = fc_vport;
if (csio_fcoe_alloc_vnp(hw, ln))
goto error;
*(struct csio_lnode **)fc_vport->dd_data = ln;
- ln->fc_vport = fc_vport;
if (!fc_vport->node_name)
fc_vport->node_name = wwn_to_u64(csio_ln_wwnn(ln));
if (!fc_vport->port_name)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 2a418cf3f5f1caf911af288e978d61c9844b0695 upstream.
When calling __put_user(foo(), ptr), the __put_user() macro would call
foo() in between __uaccess_begin() and __uaccess_end(). If that code
were buggy, then those bugs would be run without SMAP protection.
Fortunately, there seem to be few instances of the problem in the
kernel. Nevertheless, __put_user() should be fixed to avoid doing this.
Therefore, evaluate __put_user()'s argument before setting AC.
This issue was noticed when an objtool hack by Peter Zijlstra complained
about genregs_get() and I compared the assembly output to the C source.
[ bp: Massage commit message and fixed up whitespace. ]
Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/uaccess.h | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -314,8 +314,7 @@ do { \
__put_user_asm(x, ptr, retval, "l", "k", "ir", errret); \
break; \
case 8: \
- __put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval, \
- errret); \
+ __put_user_asm_u64(x, ptr, retval, errret); \
break; \
default: \
__put_user_bad(); \
@@ -426,8 +425,10 @@ do { \
#define __put_user_nocheck(x, ptr, size) \
({ \
int __pu_err; \
+ __typeof__(*(ptr)) __pu_val; \
+ __pu_val = x; \
__uaccess_begin(); \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
+ __put_user_size(__pu_val, (ptr), (size), __pu_err, -EFAULT);\
__uaccess_end(); \
__builtin_expect(__pu_err, 0); \
})
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Mironov <[email protected]>
commit dd9d3d86b08d6a106830364879c42c78db85389c upstream.
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using xhci_hcd
usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Apparently this is a POS terminal with embedded USB-to-Serial converter.
Cc: [email protected]
Signed-off-by: Ivan Mironov <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -57,6 +57,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ]
Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: Kristian H. Kristensen <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_rd.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 9a78c48817c6a..909a52b21ebe7 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -103,7 +103,9 @@ static void rd_write(struct msm_rd_state *rd, const void *buf, int sz)
char *fptr = &fifo->buf[fifo->head];
int n;
- wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0);
+ wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0 || !rd->open);
+ if (!rd->open)
+ return;
n = min(sz, circ_space_to_end(&rd->fifo));
memcpy(fptr, ptr, n);
@@ -192,7 +194,10 @@ static int rd_open(struct inode *inode, struct file *file)
static int rd_release(struct inode *inode, struct file *file)
{
struct msm_rd_state *rd = inode->i_private;
+
rd->open = false;
+ wake_up_all(&rd->fifo_event);
+
return 0;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mans Rullgard <[email protected]>
commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream.
This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick.
Signed-off-by: Mans Rullgard <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 8 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1020,6 +1020,8 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
+ /* EZPrototypes devices */
+ { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1308,6 +1308,12 @@
#define IONICS_PLUGCOMPUTER_PID 0x0102
/*
+ * EZPrototypes (PID reseller)
+ */
+#define EZPROTOTYPES_VID 0x1c40
+#define HJELMSLUND_USB485_ISO_PID 0x0477
+
+/*
* Dresden Elektronik Sensor Terminal Board
*/
#define DE_VID 0x1cf1 /* Vendor ID */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ]
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/svm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 7ce1a19d9d8bf..acbde1249b6f3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2388,6 +2388,14 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
kvm_mmu_reset_context(&svm->vcpu);
kvm_mmu_load(&svm->vcpu);
+ /*
+ * Drop what we picked up for L2 via svm_complete_interrupts() so it
+ * doesn't end up in L1.
+ */
+ svm->vcpu.arch.nmi_injected = false;
+ kvm_clear_exception_queue(&svm->vcpu);
+ kvm_clear_interrupt_queue(&svm->vcpu);
+
return 0;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3fe931b31a4078395c1967f0495dcc9e5ec6b5e3 ]
The intel_soc_dts_iosf_init() function doesn't return NULL, it returns
error pointers.
Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/int340x_thermal/processor_thermal_device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index ccc0ad02d0669..7f374ab5b1760 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -363,7 +363,7 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
proc_priv->soc_dts = intel_soc_dts_iosf_init(
INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
- if (proc_priv->soc_dts && pdev->irq) {
+ if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
ret = pci_enable_msi(pdev);
if (!ret) {
ret = request_threaded_irq(pdev->irq, NULL,
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kal Conley <[email protected]>
[ Upstream commit fc62814d690cf62189854464f4bd07457d5e9e50 ]
When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow. Check it for overflow without limiting the total buffer
size to UINT_MAX.
This change fixes support for packet ring buffers >= UINT_MAX.
Fixes: 8f8d28e4d6d8 ("net/packet: fix overflow in check for tp_frame_nr")
Signed-off-by: Kal Conley <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -4217,7 +4217,7 @@ static int packet_set_ring(struct sock *
rb->frames_per_block = req->tp_block_size / req->tp_frame_size;
if (unlikely(rb->frames_per_block == 0))
goto out;
- if (unlikely(req->tp_block_size > UINT_MAX / req->tp_block_nr))
+ if (unlikely(rb->frames_per_block > UINT_MAX / req->tp_block_nr))
goto out;
if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
req->tp_frame_nr))
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nazarov Sergey <[email protected]>
[ Upstream commit 9ef6b42ad6fd7929dd1b6092cb02014e382c6a91 ]
Add __icmp_send function having ip_options struct parameter
Signed-off-by: Sergey Nazarov <[email protected]>
Reviewed-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/icmp.h | 9 ++++++++-
net/ipv4/icmp.c | 7 ++++---
2 files changed, 12 insertions(+), 4 deletions(-)
--- a/include/net/icmp.h
+++ b/include/net/icmp.h
@@ -22,6 +22,7 @@
#include <net/inet_sock.h>
#include <net/snmp.h>
+#include <net/ip.h>
struct icmp_err {
int errno;
@@ -39,7 +40,13 @@ struct net_proto_family;
struct sk_buff;
struct net;
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info);
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+ const struct ip_options *opt);
+static inline void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+{
+ __icmp_send(skb_in, type, code, info, &IPCB(skb_in)->opt);
+}
+
int icmp_rcv(struct sk_buff *skb);
void icmp_err(struct sk_buff *skb, u32 info);
int icmp_init(void);
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -565,7 +565,8 @@ relookup_failed:
* MUST reply to only the first fragment.
*/
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+ const struct ip_options *opt)
{
struct iphdr *iph;
int room;
@@ -679,7 +680,7 @@ void icmp_send(struct sk_buff *skb_in, i
iph->tos;
mark = IP4_REPLY_MARK(net, skb_in->mark);
- if (ip_options_echo(&icmp_param->replyopts.opt.opt, skb_in))
+ if (__ip_options_echo(&icmp_param->replyopts.opt.opt, skb_in, opt))
goto out_unlock;
@@ -731,7 +732,7 @@ out_free:
kfree(icmp_param);
out:;
}
-EXPORT_SYMBOL(icmp_send);
+EXPORT_SYMBOL(__icmp_send);
static void icmp_socket_deliver(struct sk_buff *skb, u32 info)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Moore <[email protected]>
[ Upstream commit 5578de4834fe0f2a34fedc7374be691443396d1f ]
There are two array out-of-bounds memory accesses, one in
cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both
errors are embarassingly simple, and the fixes are straightforward.
As a FYI for anyone backporting this patch to kernels prior to v4.8,
you'll want to apply the netlbl_bitmap_walk() patch to
cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before
Linux v4.8.
Reported-by: Jann Horn <[email protected]>
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.")
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/cipso_ipv4.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -167,7 +167,8 @@ static int cipso_v4_bitmap_walk(const un
(state == 0 && (byte & bitmask) == 0))
return bit_spot;
- bit_spot++;
+ if (++bit_spot >= bitmap_len)
+ return -1;
bitmask >>= 1;
if (bitmask == 0) {
byte = bitmap[++byte_offset];
@@ -737,7 +738,8 @@ static int cipso_v4_map_lvl_valid(const
case CIPSO_V4_MAP_PASS:
return 0;
case CIPSO_V4_MAP_TRANS:
- if (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL)
+ if ((level < doi_def->map.std->lvl.cipso_size) &&
+ (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL))
return 0;
break;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Kravetz <[email protected]>
commit cb6acd01e2e43fd8bad11155752b7699c3d0fb76 upstream.
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: <[email protected]>
[[email protected]: v2]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: update comment and changelog]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hugetlbfs/inode.c | 12 ++++++++++++
mm/hugetlb.c | 14 ++++++++++++--
mm/migrate.c | 11 +++++++++++
3 files changed, 35 insertions(+), 2 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -869,6 +869,18 @@ static int hugetlbfs_migrate_page(struct
rc = migrate_huge_page_move_mapping(mapping, newpage, page);
if (rc != MIGRATEPAGE_SUCCESS)
return rc;
+
+ /*
+ * page_private is subpool pointer in hugetlb pages. Transfer to
+ * new page. PagePrivate is not associated with page_private for
+ * hugetlb pages and can not be set here as only page_huge_active
+ * pages can be migrated.
+ */
+ if (page_private(page)) {
+ set_page_private(newpage, page_private(page));
+ set_page_private(page, 0);
+ }
+
migrate_page_copy(newpage, page);
return MIGRATEPAGE_SUCCESS;
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3472,7 +3472,6 @@ retry_avoidcopy:
copy_user_huge_page(new_page, old_page, address, vma,
pages_per_huge_page(h));
__SetPageUptodate(new_page);
- set_page_huge_active(new_page);
mmun_start = address & huge_page_mask(h);
mmun_end = mmun_start + huge_page_size(h);
@@ -3494,6 +3493,7 @@ retry_avoidcopy:
make_huge_pte(vma, new_page, 1));
page_remove_rmap(old_page);
hugepage_add_new_anon_rmap(new_page, vma, address);
+ set_page_huge_active(new_page);
/* Make the old page be freed below */
new_page = old_page;
}
@@ -3575,6 +3575,7 @@ static int hugetlb_no_page(struct mm_str
struct page *page;
pte_t new_pte;
spinlock_t *ptl;
+ bool new_page = false;
/*
* Currently, we are forced to kill the process in the event the
@@ -3608,7 +3609,7 @@ retry:
}
clear_huge_page(page, address, pages_per_huge_page(h));
__SetPageUptodate(page);
- set_page_huge_active(page);
+ new_page = true;
if (vma->vm_flags & VM_MAYSHARE) {
int err = huge_add_to_page_cache(page, mapping, idx);
@@ -3680,6 +3681,15 @@ retry:
}
spin_unlock(ptl);
+
+ /*
+ * Only make newly allocated pages active. Existing pages found
+ * in the pagecache could be !page_huge_active() if they have been
+ * isolated for migration.
+ */
+ if (new_page)
+ set_page_huge_active(page);
+
unlock_page(page);
out:
return ret;
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1056,6 +1056,16 @@ static int unmap_and_move_huge_page(new_
lock_page(hpage);
}
+ /*
+ * Check for pages which are in the process of being freed. Without
+ * page_mapping() set, hugetlbfs specific move page routine will not
+ * be called and we could leak usage counts for subpools.
+ */
+ if (page_private(hpage) && !page_mapping(hpage)) {
+ rc = -EBUSY;
+ goto out_unlock;
+ }
+
if (PageAnon(hpage))
anon_vma = page_get_anon_vma(hpage);
@@ -1086,6 +1096,7 @@ put_anon:
put_new_page = NULL;
}
+out_unlock:
unlock_page(hpage);
out:
if (rc != -EAGAIN)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <[email protected]>
[ Upstream commit 6e46e2d821bb22b285ae8187959096b65d063b0d ]
The switch maintains u64 counters for the number of octets sent and
received. These are kept as two u32's which need to be combined. Fix
the combing, which wrongly worked on u16's.
Fixes: 80c4627b2719 ("dsa: mv88x6xxx: Refactor getting a single statistic")
Reported-by: Chris Healy <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -712,7 +712,7 @@ static uint64_t _mv88e6xxx_get_ethtool_s
if (s->sizeof_stat == 8)
_mv88e6xxx_stats_read(ds, s->reg + 1, &high);
}
- value = (((u64)high) << 16) | low;
+ value = (((u64)high) << 32) | low;
return value;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit d7ac3c6ef5d8ce14b6381d52eb7adafdd6c8bb3c upstream.
IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)
Fix this by sanitizing IndexCard before using it to index apbs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/applicom.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -32,6 +32,7 @@
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/fs.h>
+#include <linux/nospec.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -386,7 +387,11 @@ static ssize_t ac_write(struct file *fil
TicCard = st_loc.tic_des_from_pc; /* tic number to send */
IndexCard = NumCard - 1;
- if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
+ if (IndexCard >= MAX_BOARD)
+ return -EINVAL;
+ IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+ if (!apbs[IndexCard].RamIO)
return -EINVAL;
#ifdef DEBUG
@@ -697,6 +702,7 @@ static long ac_ioctl(struct file *file,
unsigned char IndexCard;
void __iomem *pmem;
int ret = 0;
+ static int warncount = 10;
volatile unsigned char byte_reset_it;
struct st_ram_io *adgl;
void __user *argp = (void __user *)arg;
@@ -711,16 +717,12 @@ static long ac_ioctl(struct file *file,
mutex_lock(&ac_mutex);
IndexCard = adgl->num_card-1;
- if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
- static int warncount = 10;
- if (warncount) {
- printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
- warncount--;
- }
- kfree(adgl);
- mutex_unlock(&ac_mutex);
- return -EINVAL;
- }
+ if (cmd != 6 && IndexCard >= MAX_BOARD)
+ goto err;
+ IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+ if (cmd != 6 && !apbs[IndexCard].RamIO)
+ goto err;
switch (cmd) {
@@ -838,5 +840,16 @@ static long ac_ioctl(struct file *file,
kfree(adgl);
mutex_unlock(&ac_mutex);
return 0;
+
+err:
+ if (warncount) {
+ pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
+ (int)IndexCard + 1);
+ warncount--;
+ }
+ kfree(adgl);
+ mutex_unlock(&ac_mutex);
+ return -EINVAL;
+
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Saeed Mahameed <[email protected]>
[ Upstream commit 29dded89e80e3fff61efb34f07a8a3fba3ea146d ]
When an ethernet frame is padded to meet the minimum ethernet frame
size, the padding octets are not covered by the hardware checksum.
Fortunately the padding octets are usually zero's, which don't affect
checksum. However, it is not guaranteed. For example, switches might
choose to make other use of these octets.
This repeatedly causes kernel hardware checksum fault.
Prior to the cited commit below, skb checksum was forced to be
CHECKSUM_NONE when padding is detected. After it, we need to keep
skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to
verify and parse IP headers, it does not worth the effort as the packets
are so small that CHECKSUM_COMPLETE has no significant advantage.
Future work: when reporting checksum complete is not an option for
IP non-TCP/UDP packets, we can actually fallback to report checksum
unnecessary, by looking at cqe IPOK bit.
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -725,13 +725,27 @@ static int get_fixed_ipv6_csum(__wsum hw
return 0;
}
#endif
+
+#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN)
+
static int check_csum(struct mlx4_cqe *cqe, struct sk_buff *skb, void *va,
netdev_features_t dev_features)
{
__wsum hw_checksum = 0;
+ void *hdr;
- void *hdr = (u8 *)va + sizeof(struct ethhdr);
+ /* CQE csum doesn't cover padding octets in short ethernet
+ * frames. And the pad field is appended prior to calculating
+ * and appending the FCS field.
+ *
+ * Detecting these padded frames requires to verify and parse
+ * IP headers, so we simply force all those small frames to skip
+ * checksum complete.
+ */
+ if (short_frame(skb->len))
+ return -EINVAL;
+ hdr = (u8 *)va + sizeof(struct ethhdr);
hw_checksum = csum_unfold((__force __sum16)cqe->checksum);
if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_CVLAN_PRESENT_MASK) &&
@@ -851,6 +865,11 @@ int mlx4_en_process_rx_cq(struct net_dev
(cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_L2_TUNNEL));
if (likely(dev->features & NETIF_F_RXCSUM)) {
+ /* TODO: For IP non TCP/UDP packets when csum complete is
+ * not an option (not supported or any other reason) we can
+ * actually check cqe IPOK status bit and report
+ * CHECKSUM_UNNECESSARY rather than CHECKSUM_NONE
+ */
if (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP |
MLX4_CQE_STATUS_UDP)) {
if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Eremin <[email protected]>
commit 9563fe8a2de9db5eb087fe0e48ec335ee66f8f41 upstream.
Buffer overflow of string buffer due to non null terminated string.
Use strlcpy() when it's justifiable.
Use sizeof(var) instead of constants.
Signed-off-by: Dmitry Eremin <[email protected]>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9389
Reviewed-by: Andreas Dilger <[email protected]>
Reviewed-by: Oleg Drokin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c | 9 +++++----
drivers/staging/lustre/lnet/lnet/config.c | 14 ++++++++------
drivers/staging/lustre/lnet/selftest/conrpc.c | 4 ++--
drivers/staging/lustre/lnet/selftest/console.c | 6 ++++--
drivers/staging/lustre/lustre/include/lustre_disk.h | 1 +
drivers/staging/lustre/lustre/libcfs/debug.c | 6 +++---
drivers/staging/lustre/lustre/libcfs/hash.c | 3 +--
drivers/staging/lustre/lustre/libcfs/workitem.c | 4 ++--
drivers/staging/lustre/lustre/llite/dir.c | 2 +-
drivers/staging/lustre/lustre/lov/lov_pool.c | 3 +--
drivers/staging/lustre/lustre/obdclass/obd_mount.c | 10 +++++++---
drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.c | 1 +
drivers/staging/lustre/lustre/ptlrpc/sec_config.c | 3 +--
13 files changed, 37 insertions(+), 29 deletions(-)
--- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c
+++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c
@@ -2621,8 +2621,8 @@ ksocknal_enumerate_interfaces(ksock_net_
net->ksnn_interfaces[j].ksni_ipaddr = ip;
net->ksnn_interfaces[j].ksni_netmask = mask;
- strncpy(&net->ksnn_interfaces[j].ksni_name[0],
- names[i], IFNAMSIZ);
+ strlcpy(net->ksnn_interfaces[j].ksni_name,
+ names[i], sizeof(net->ksnn_interfaces[j].ksni_name));
j++;
}
@@ -2805,8 +2805,9 @@ ksocknal_startup(lnet_ni_t *ni)
goto fail_1;
}
- strncpy(&net->ksnn_interfaces[i].ksni_name[0],
- ni->ni_interfaces[i], IFNAMSIZ);
+ strlcpy(net->ksnn_interfaces[i].ksni_name,
+ ni->ni_interfaces[i],
+ sizeof(net->ksnn_interfaces[i].ksni_name));
}
net->ksnn_ninterfaces = i;
}
--- a/drivers/staging/lustre/lnet/lnet/config.c
+++ b/drivers/staging/lustre/lnet/lnet/config.c
@@ -650,8 +650,8 @@ lnet_parse_route(char *str, int *im_a_ro
INIT_LIST_HEAD(&nets);
/* save a copy of the string for error messages */
- strncpy(cmd, str, sizeof(cmd) - 1);
- cmd[sizeof(cmd) - 1] = 0;
+ strncpy(cmd, str, sizeof(cmd));
+ cmd[sizeof(cmd) - 1] = '\0';
sep = str;
for (;;) {
@@ -972,11 +972,13 @@ lnet_splitnets(char *source, struct list
return 0;
offset += (int)(sep - tb->ltb_text);
- tb2 = lnet_new_text_buf(strlen(sep));
+ len = strlen(sep);
+ tb2 = lnet_new_text_buf(len);
if (tb2 == NULL)
return -ENOMEM;
- strcpy(tb2->ltb_text, sep);
+ strncpy(tb2->ltb_text, sep, len);
+ tb2->ltb_text[len] = '\0';
list_add_tail(&tb2->ltb_list, nets);
tb = tb2;
@@ -1021,8 +1023,8 @@ lnet_match_networks(char **networksp, ch
tb = list_entry(raw_entries.next, struct lnet_text_buf_t,
ltb_list);
- strncpy(source, tb->ltb_text, sizeof(source)-1);
- source[sizeof(source)-1] = 0;
+ strncpy(source, tb->ltb_text, sizeof(source));
+ source[sizeof(source)-1] = '\0';
/* replace ltb_text with the network(s) add on match */
rc = lnet_match_network_tokens(tb->ltb_text, ipaddrs, nip);
--- a/drivers/staging/lustre/lnet/selftest/conrpc.c
+++ b/drivers/staging/lustre/lnet/selftest/conrpc.c
@@ -612,8 +612,8 @@ lstcon_sesrpc_prep(lstcon_node_t *nd, in
msrq = &(*crpc)->crp_rpc->crpc_reqstmsg.msg_body.mksn_reqst;
msrq->mksn_sid = console_session.ses_id;
msrq->mksn_force = console_session.ses_force;
- strncpy(msrq->mksn_name, console_session.ses_name,
- strlen(console_session.ses_name));
+ strlcpy(msrq->mksn_name, console_session.ses_name,
+ sizeof(msrq->mksn_name));
break;
case LST_TRANS_SESEND:
--- a/drivers/staging/lustre/lnet/selftest/console.c
+++ b/drivers/staging/lustre/lnet/selftest/console.c
@@ -1739,7 +1739,8 @@ lstcon_session_new(char *name, int key,
console_session.ses_feats_updated = 0;
console_session.ses_timeout = (timeout <= 0) ?
LST_CONSOLE_TIMEOUT : timeout;
- strcpy(console_session.ses_name, name);
+ strlcpy(console_session.ses_name, name,
+ sizeof(console_session.ses_name));
rc = lstcon_batch_add(LST_DEFAULT_BATCH);
if (rc != 0)
@@ -1959,7 +1960,8 @@ lstcon_acceptor_handle(srpc_server_rpc_t
if (grp->grp_userland == 0)
grp->grp_userland = 1;
- strcpy(jrep->join_session, console_session.ses_name);
+ strlcpy(jrep->join_session, console_session.ses_name,
+ sizeof(jrep->join_session));
jrep->join_timeout = console_session.ses_timeout;
jrep->join_status = 0;
--- a/drivers/staging/lustre/lustre/include/lustre_disk.h
+++ b/drivers/staging/lustre/lustre/include/lustre_disk.h
@@ -68,6 +68,7 @@
everything as string options */
#define LMD_MAGIC 0xbdacbd03
+#define LMD_PARAMS_MAXLEN 4096
/* gleaned from the mount command - no persistent info here */
struct lustre_mount_data {
--- a/drivers/staging/lustre/lustre/libcfs/debug.c
+++ b/drivers/staging/lustre/lustre/libcfs/debug.c
@@ -512,9 +512,9 @@ int libcfs_debug_init(unsigned long bufs
}
if (libcfs_debug_file_path != NULL) {
- strncpy(libcfs_debug_file_path_arr,
- libcfs_debug_file_path, PATH_MAX-1);
- libcfs_debug_file_path_arr[PATH_MAX - 1] = '\0';
+ strlcpy(libcfs_debug_file_path_arr,
+ libcfs_debug_file_path,
+ sizeof(libcfs_debug_file_path_arr));
}
/* If libcfs_debug_mb is set to an invalid value or uninitialized
--- a/drivers/staging/lustre/lustre/libcfs/hash.c
+++ b/drivers/staging/lustre/lustre/libcfs/hash.c
@@ -1062,8 +1062,7 @@ cfs_hash_create(char *name, unsigned cur
if (hs == NULL)
return NULL;
- strncpy(hs->hs_name, name, len);
- hs->hs_name[len - 1] = '\0';
+ strlcpy(hs->hs_name, name, len);
hs->hs_flags = flags;
atomic_set(&hs->hs_refcount, 1);
--- a/drivers/staging/lustre/lustre/libcfs/workitem.c
+++ b/drivers/staging/lustre/lustre/libcfs/workitem.c
@@ -360,8 +360,8 @@ cfs_wi_sched_create(char *name, struct c
if (sched == NULL)
return -ENOMEM;
- strncpy(sched->ws_name, name, CFS_WS_NAME_LEN);
- sched->ws_name[CFS_WS_NAME_LEN - 1] = '\0';
+ strlcpy(sched->ws_name, name, CFS_WS_NAME_LEN);
+
sched->ws_cptab = cptab;
sched->ws_cpt = cpt;
--- a/drivers/staging/lustre/lustre/llite/dir.c
+++ b/drivers/staging/lustre/lustre/llite/dir.c
@@ -641,7 +641,7 @@ static int ll_send_mgc_param(struct obd_
if (!msp)
return -ENOMEM;
- strncpy(msp->mgs_param, string, MGS_PARAM_MAXLEN);
+ strlcpy(msp->mgs_param, string, sizeof(msp->mgs_param));
rc = obd_set_info_async(NULL, mgc, sizeof(KEY_SET_INFO), KEY_SET_INFO,
sizeof(struct mgs_send_param), msp, NULL);
if (rc)
--- a/drivers/staging/lustre/lustre/lov/lov_pool.c
+++ b/drivers/staging/lustre/lustre/lov/lov_pool.c
@@ -412,8 +412,7 @@ int lov_pool_new(struct obd_device *obd,
if (!new_pool)
return -ENOMEM;
- strncpy(new_pool->pool_name, poolname, LOV_MAXPOOLNAME);
- new_pool->pool_name[LOV_MAXPOOLNAME] = '\0';
+ strlcpy(new_pool->pool_name, poolname, sizeof(new_pool->pool_name));
new_pool->pool_lobd = obd;
/* ref count init to 1 because when created a pool is always used
* up to deletion
--- a/drivers/staging/lustre/lustre/obdclass/obd_mount.c
+++ b/drivers/staging/lustre/lustre/obdclass/obd_mount.c
@@ -892,7 +892,7 @@ static int lmd_parse(char *options, stru
}
lmd->lmd_magic = LMD_MAGIC;
- lmd->lmd_params = kzalloc(4096, GFP_NOFS);
+ lmd->lmd_params = kzalloc(LMD_PARAMS_MAXLEN, GFP_NOFS);
if (!lmd->lmd_params)
return -ENOMEM;
lmd->lmd_params[0] = '\0';
@@ -978,7 +978,7 @@ static int lmd_parse(char *options, stru
goto invalid;
clear++;
} else if (strncmp(s1, "param=", 6) == 0) {
- int length;
+ size_t length, params_length;
char *tail = strchr(s1 + 6, ',');
if (tail == NULL)
@@ -986,8 +986,12 @@ static int lmd_parse(char *options, stru
else
length = tail - s1;
length -= 6;
+ params_length = strlen(lmd->lmd_params);
+ if (params_length + length + 1 >= LMD_PARAMS_MAXLEN)
+ return -E2BIG;
strncat(lmd->lmd_params, s1 + 6, length);
- strcat(lmd->lmd_params, " ");
+ lmd->lmd_params[params_length + length] = '\0';
+ strlcat(lmd->lmd_params, " ", LMD_PARAMS_MAXLEN);
clear++;
} else if (strncmp(s1, "osd=", 4) == 0) {
rc = lmd_parse_string(&lmd->lmd_osd_type, s1 + 4);
--- a/drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.c
@@ -422,6 +422,7 @@ static int ptlrpcd(void *arg)
complete(&pc->pc_starting);
/*
+
* This mainloop strongly resembles ptlrpc_set_wait() except that our
* set never completes. ptlrpcd_check() calls ptlrpc_check_set() when
* there are requests in the set. New requests come in on the set's
--- a/drivers/staging/lustre/lustre/ptlrpc/sec_config.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/sec_config.c
@@ -83,8 +83,7 @@ int sptlrpc_parse_flavor(const char *str
return 0;
}
- strncpy(buf, str, sizeof(buf));
- buf[sizeof(buf) - 1] = '\0';
+ strlcpy(buf, str, sizeof(buf));
bulk = strchr(buf, '-');
if (bulk)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nazarov Sergey <[email protected]>
[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ]
Extract IP options in cipso_v4_error and use __icmp_send.
Signed-off-by: Sergey Nazarov <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/ip.h | 2 ++
net/ipv4/cipso_ipv4.c | 17 +++++++++++++++--
net/ipv4/ip_options.c | 22 +++++++++++++++++-----
3 files changed, 34 insertions(+), 7 deletions(-)
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -546,6 +546,8 @@ static inline int ip_options_echo(struct
}
void ip_options_fragment(struct sk_buff *skb);
+int __ip_options_compile(struct net *net, struct ip_options *opt,
+ struct sk_buff *skb, __be32 *info);
int ip_options_compile(struct net *net, struct ip_options *opt,
struct sk_buff *skb);
int ip_options_get(struct net *net, struct ip_options_rcu **optp,
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1805,13 +1805,26 @@ validate_return:
*/
void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway)
{
+ unsigned char optbuf[sizeof(struct ip_options) + 40];
+ struct ip_options *opt = (struct ip_options *)optbuf;
+
if (ip_hdr(skb)->protocol == IPPROTO_ICMP || error != -EACCES)
return;
+ /*
+ * We might be called above the IP layer,
+ * so we can not use icmp_send and IPCB here.
+ */
+
+ memset(opt, 0, sizeof(struct ip_options));
+ opt->optlen = ip_hdr(skb)->ihl*4 - sizeof(struct iphdr);
+ if (__ip_options_compile(dev_net(skb->dev), opt, skb, NULL))
+ return;
+
if (gateway)
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0);
+ __icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0, opt);
else
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0);
+ __icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0, opt);
}
/**
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -254,8 +254,9 @@ static void spec_dst_fill(__be32 *spec_d
* If opt == NULL, then skb->data should point to IP header.
*/
-int ip_options_compile(struct net *net,
- struct ip_options *opt, struct sk_buff *skb)
+int __ip_options_compile(struct net *net,
+ struct ip_options *opt, struct sk_buff *skb,
+ __be32 *info)
{
__be32 spec_dst = htonl(INADDR_ANY);
unsigned char *pp_ptr = NULL;
@@ -472,11 +473,22 @@ eol:
return 0;
error:
- if (skb) {
- icmp_send(skb, ICMP_PARAMETERPROB, 0, htonl((pp_ptr-iph)<<24));
- }
+ if (info)
+ *info = htonl((pp_ptr-iph)<<24);
return -EINVAL;
}
+
+int ip_options_compile(struct net *net,
+ struct ip_options *opt, struct sk_buff *skb)
+{
+ int ret;
+ __be32 info;
+
+ ret = __ip_options_compile(net, opt, skb, &info);
+ if (ret != 0 && skb)
+ icmp_send(skb, ICMP_PARAMETERPROB, 0, info);
+ return ret;
+}
EXPORT_SYMBOL(ip_options_compile);
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
[ Upstream commit b33b7cd6fd86478dd2890a9abeb6f036aa01fdf7 ]
Some sky2 chips fire IRQ after S3, before the driver is fully resumed:
[ 686.804877] do_IRQ: 1.37 No irq handler for vector
This is likely a platform bug that device isn't fully quiesced during
S3. Use MSI-X, maskable MSI or INTx can prevent this issue from
happening.
Since MSI-X and maskable MSI are not supported by this device, fallback
to use INTx on affected platforms.
BugLink: https://bugs.launchpad.net/bugs/1807259
BugLink: https://bugs.launchpad.net/bugs/1809843
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/sky2.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -46,6 +46,7 @@
#include <linux/mii.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
@@ -93,7 +94,7 @@ static int copybreak __read_mostly = 128
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
+static int disable_msi = -1;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
@@ -4923,6 +4924,24 @@ static const char *sky2_name(u8 chipid,
return buf;
}
+static const struct dmi_system_id msi_blacklist[] = {
+ {
+ .ident = "Dell Inspiron 1545",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
+ },
+ },
+ {
+ .ident = "Gateway P-79",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
+ },
+ },
+ {}
+};
+
static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *dev, *dev1;
@@ -5034,6 +5053,9 @@ static int sky2_probe(struct pci_dev *pd
goto err_out_free_pci;
}
+ if (disable_msi == -1)
+ disable_msi = !!dmi_check_system(msi_blacklist);
+
if (!disable_msi && pci_enable_msi(pdev) == 0) {
err = sky2_test_msi(hw);
if (err) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
Not upstream as isdn is long deleted.
Fix up a strncpy build warning for isdn_tty_suspend() using strscpy.
It's not like anyone uses this code anyway, and this gets rid of a build
warnings so that we can see real warnings as they pop up over time.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/i4l/isdn_tty.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -786,7 +786,7 @@ isdn_tty_suspend(char *id, modem_info *i
cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */
cmd.parm.cmsg.para[4] = 0;
cmd.parm.cmsg.para[5] = l;
- strncpy(&cmd.parm.cmsg.para[6], id, l);
+ strscpy(&cmd.parm.cmsg.para[6], id, l);
cmd.command = CAPI_PUT_MESSAGE;
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit 692c31bd4054212312396b1d303bffab2c5b93a7 ]
When team is used in loadbalance mode a BPF filter can be used to
provide a hash which will determine the Tx port.
When the netdev is later unregistered the filter is not freed which
results in memory leaks [1].
Fix by freeing the program and the corresponding filter when
unregistering the netdev.
[1]
unreferenced object 0xffff8881dbc47cc8 (size 16):
comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s)
hex dump (first 16 bytes):
a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........
backtrace:
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
unreferenced object 0xffff8881e182a588 (size 2048):
comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s)
hex dump (first 32 bytes):
20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(...
07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(.......
backtrace:
[<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
Fixes: 01d7f30a9f96 ("team: add loadbalance mode")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/team/team_mode_loadbalance.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/net/team/team_mode_loadbalance.c
+++ b/drivers/net/team/team_mode_loadbalance.c
@@ -305,6 +305,20 @@ static int lb_bpf_func_set(struct team *
return 0;
}
+static void lb_bpf_func_free(struct team *team)
+{
+ struct lb_priv *lb_priv = get_lb_priv(team);
+ struct bpf_prog *fp;
+
+ if (!lb_priv->ex->orig_fprog)
+ return;
+
+ __fprog_destroy(lb_priv->ex->orig_fprog);
+ fp = rcu_dereference_protected(lb_priv->fp,
+ lockdep_is_held(&team->lock));
+ bpf_prog_destroy(fp);
+}
+
static int lb_tx_method_get(struct team *team, struct team_gsetter_ctx *ctx)
{
struct lb_priv *lb_priv = get_lb_priv(team);
@@ -619,6 +633,7 @@ static void lb_exit(struct team *team)
team_options_unregister(team, lb_options,
ARRAY_SIZE(lb_options));
+ lb_bpf_func_free(team);
cancel_delayed_work_sync(&lb_priv->ex->stats.refresh_dw);
free_percpu(lb_priv->pcpu_stats);
kfree(lb_priv->ex);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Forshee <[email protected]>
commit 186b8f1587c79c2fa04bfa392fdf084443e398c1 upstream.
Several callers to epapr_hypercall() pass an uninitialized stack
allocated array for the input arguments, presumably because they
have no input arguments. However this can produce errors like
this one
arch/powerpc/include/asm/epapr_hcalls.h:470:42: error: 'in' may be used uninitialized in this function [-Werror=maybe-uninitialized]
unsigned long register r3 asm("r3") = in[0];
~~^~~
Fix callers to this function to always zero-initialize the input
arguments array to prevent this.
Signed-off-by: Seth Forshee <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Cc: "A. Wilcox" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/epapr_hcalls.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -508,7 +508,7 @@ static unsigned long epapr_hypercall(uns
static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
unsigned long r;
@@ -520,7 +520,7 @@ static inline long epapr_hypercall0_1(un
static inline long epapr_hypercall0(unsigned int nr)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
return epapr_hypercall(in, out, nr);
@@ -528,7 +528,7 @@ static inline long epapr_hypercall0(unsi
static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -538,7 +538,7 @@ static inline long epapr_hypercall1(unsi
static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
unsigned long p2)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -549,7 +549,7 @@ static inline long epapr_hypercall2(unsi
static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
unsigned long p2, unsigned long p3)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
@@ -562,7 +562,7 @@ static inline long epapr_hypercall4(unsi
unsigned long p2, unsigned long p3,
unsigned long p4)
{
- unsigned long in[8];
+ unsigned long in[8] = {0};
unsigned long out[8];
in[0] = p1;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ]
The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.
Signed-off-by: Atsushi Nemoto <[email protected]>
Acked-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/altera/altera_tse_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index fe644823ceaf9..bb51f124d8c7d 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -716,8 +716,10 @@ static struct phy_device *connect_local_phy(struct net_device *dev)
phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
priv->phy_iface);
- if (IS_ERR(phydev))
+ if (IS_ERR(phydev)) {
netdev_err(dev, "Could not attach to PHY\n");
+ phydev = NULL;
+ }
} else {
int ret;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ]
The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmveth.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 61a9ab4fe047d..70b3253e7ed5e 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1238,7 +1238,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
struct iphdr *iph;
u16 mss = 0;
-restart_poll:
while (frames_processed < budget) {
if (!ibmveth_rxq_pending_buffer(adapter))
break;
@@ -1336,7 +1335,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
napi_reschedule(napi)) {
lpar_rc = h_vio_signal(adapter->vdev->unit_address,
VIO_IRQ_DISABLE);
- goto restart_poll;
}
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alistair Strachan <[email protected]>
commit 47bb117911b051bbc90764a8bff96543cbd2005f upstream.
When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.
If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.
Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.
Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.
Reported-by: syzbot <[email protected]>
Signed-off-by: Alistair Strachan <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_driver.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1019,11 +1019,19 @@ static int uvc_parse_standard_control(st
return -EINVAL;
}
- /* Make sure the terminal type MSB is not null, otherwise it
- * could be confused with a unit.
+ /*
+ * Reject invalid terminal types that would cause issues:
+ *
+ * - The high byte must be non-zero, otherwise it would be
+ * confused with a unit.
+ *
+ * - Bit 15 must be 0, as we use it internally as a terminal
+ * direction flag.
+ *
+ * Other unknown types are accepted.
*/
type = get_unaligned_le16(&buffer[4]);
- if ((type & 0xff00) == 0) {
+ if ((type & 0x7f00) == 0 || (type & 0x8000) != 0) {
uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
"interface %d INPUT_TERMINAL %d has invalid "
"type 0x%04x, skipping\n", udev->devnum,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn <[email protected]>
commit 0a1d52994d440e21def1c2174932410b4f2a98a1 upstream.
security_mmap_addr() does a capability check with current_cred(), but
we can reach this code from contexts like a VFS write handler where
current_cred() must not be used.
This can be abused on systems without SMAP to make NULL pointer
dereferences exploitable again.
Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses")
Cc: [email protected]
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mmap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2294,12 +2294,11 @@ int expand_downwards(struct vm_area_stru
struct mm_struct *mm = vma->vm_mm;
struct vm_area_struct *prev;
unsigned long gap_addr;
- int error;
+ int error = 0;
address &= PAGE_MASK;
- error = security_mmap_addr(address);
- if (error)
- return error;
+ if (address < mmap_min_addr)
+ return -EPERM;
/* Enforce stack_guard_gap */
gap_addr = address - stack_guard_gap;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 1d6a821277aaa0cdd666278aaff93298df313d41 upstream.
On an MMIO access, we always copy the on-stack buffer info
the shared "run" structure, even if this is a read access.
This ends up leaking up to 8 bytes of uninitialized memory
into userspace, depending on the size of the access.
An obvious fix for this one is to only perform the copy if
this is an actual write.
Reviewed-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kvm/mmio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -207,7 +207,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu,
run->mmio.is_write = is_write;
run->mmio.phys_addr = fault_ipa;
run->mmio.len = len;
- memcpy(run->mmio.data, data_buf, len);
+ if (is_write)
+ memcpy(run->mmio.data, data_buf, len);
if (!ret) {
/* We handled the access successfully in the kernel. */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]
There is a NULL pointer dereference of dev_name in nfs_parse_devname()
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
...
Call Trace:
? ida_alloc_range+0x34b/0x3d0
? nfs_clone_super+0x80/0x80 [nfs]
? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
mount_fs+0x52/0x170
? __init_waitqueue_head+0x3b/0x50
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on dev_name
Signed-off-by: Yao Liu <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/super.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 412fcfbc50e2..9b42139a479b 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1877,6 +1877,11 @@ static int nfs_parse_devname(const char *dev_name,
size_t len;
char *end;
+ if (unlikely(!dev_name || !*dev_name)) {
+ dfprintk(MOUNT, "NFS: device name not specified\n");
+ return -EINVAL;
+ }
+
/* Is the host name protected with square brakcets? */
if (*dev_name == '[') {
end = strchr(++dev_name, ']');
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Igor Druzhinin <[email protected]>
[ Upstream commit 99e87f56b48f490fb16b6e0f74691c1e664dea95 ]
Zero-copy callback flag is not yet set on frag list skb at the moment
xenvif_handle_frag_list() returns -ENOMEM. This eventually results in
leaking grant ref mappings since xenvif_zerocopy_callback() is never
called for these fragments. Those eventually build up and cause Xen
to kill Dom0 as the slots get reused for new mappings:
"d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005"
That behavior is observed under certain workloads where sudden spikes
of page cache writes coexist with active atomic skb allocations from
network traffic. Additionally, rework the logic to deal with frag_list
deallocation in a single place.
Signed-off-by: Paul Durrant <[email protected]>
Signed-off-by: Igor Druzhinin <[email protected]>
Acked-by: Wei Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/netback.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1538,11 +1538,6 @@ static int xenvif_handle_frag_list(struc
skb_frag_size_set(&frags[i], len);
}
- /* Copied all the bits from the frag list -- free it. */
- skb_frag_list_init(skb);
- xenvif_skb_zerocopy_prepare(queue, nskb);
- kfree_skb(nskb);
-
/* Release all the original (foreign) frags. */
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
skb_frag_unref(skb, f);
@@ -1611,6 +1606,8 @@ static int xenvif_tx_submit(struct xenvi
xenvif_fill_frags(queue, skb);
if (unlikely(skb_has_frag_list(skb))) {
+ struct sk_buff *nskb = skb_shinfo(skb)->frag_list;
+ xenvif_skb_zerocopy_prepare(queue, nskb);
if (xenvif_handle_frag_list(queue, skb)) {
if (net_ratelimit())
netdev_err(queue->vif->dev,
@@ -1619,6 +1616,9 @@ static int xenvif_tx_submit(struct xenvi
kfree_skb(skb);
continue;
}
+ /* Copied all the bits from the frag list -- free it. */
+ skb_frag_list_init(skb);
+ kfree_skb(nskb);
}
skb->dev = queue->vif->dev;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]
There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'
Reproduce program:
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#define IPPROTO_IP 0
#define IPPROTO_RAW 255
#define IP_VS_BASE_CTL (64+1024+64)
#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)
/* The argument to IP_VS_SO_GET_TIMEOUT */
struct ipvs_timeout_t {
int tcp_timeout;
int tcp_fin_timeout;
int udp_timeout;
};
int main() {
int ret = -1;
int sockfd = -1;
struct ipvs_timeout_t to;
sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
if (sockfd == -1) {
printf("socket init error\n");
return -1;
}
to.tcp_timeout = -2147483647;
to.tcp_fin_timeout = -2147483647;
to.udp_timeout = -2147483647;
ret = setsockopt(sockfd,
IPPROTO_IP,
IP_VS_SO_SET_TIMEOUT,
(char *)(&to),
sizeof(to));
printf("setsockopt return %d\n", ret);
return ret;
}
Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.
Signed-off-by: ZhangXiaoxu <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_ctl.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 3167ec76903a..56c62b65923f 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2217,6 +2217,18 @@ static int ip_vs_set_timeout(struct netns_ipvs *ipvs, struct ip_vs_timeout_user
u->tcp_fin_timeout,
u->udp_timeout);
+#ifdef CONFIG_IP_VS_PROTO_TCP
+ if (u->tcp_timeout < 0 || u->tcp_timeout > (INT_MAX / HZ) ||
+ u->tcp_fin_timeout < 0 || u->tcp_fin_timeout > (INT_MAX / HZ)) {
+ return -EINVAL;
+ }
+#endif
+
+#ifdef CONFIG_IP_VS_PROTO_UDP
+ if (u->udp_timeout < 0 || u->udp_timeout > (INT_MAX / HZ))
+ return -EINVAL;
+#endif
+
#ifdef CONFIG_IP_VS_PROTO_TCP
if (u->tcp_timeout) {
pd = ip_vs_proto_data_get(ipvs, IPPROTO_TCP);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 625c85a62cb7d3c79f6e16de3cfa972033658250 upstream.
The cpufreq_global_kobject is created using kobject_create_and_add()
helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store
routines are set to kobj_attr_show() and kobj_attr_store().
These routines pass struct kobj_attribute as an argument to the
show/store callbacks. But all the cpufreq files created using the
cpufreq_global_kobject expect the argument to be of type struct
attribute. Things work fine currently as no one accesses the "attr"
argument. We may not see issues even if the argument is used, as struct
kobj_attribute has struct attribute as its first element and so they
will both get same address.
But this is logically incorrect and we should rather use struct
kobj_attribute instead of struct global_attr in the cpufreq core and
drivers and the show/store callbacks should take struct kobj_attribute
as argument instead.
This bug is caught using CFI CLANG builds in android kernel which
catches mismatch in function prototypes for such callbacks.
Reported-by: Donghee Han <[email protected]>
Reported-by: Sangkyu Kim <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cpufreq.c | 6 +++---
drivers/cpufreq/cpufreq_governor.h | 10 +++++-----
drivers/cpufreq/intel_pstate.c | 14 +++++++-------
include/linux/cpufreq.h | 12 ++----------
4 files changed, 17 insertions(+), 25 deletions(-)
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -474,13 +474,13 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_transitio
* SYSFS INTERFACE *
*********************************************************************/
static ssize_t show_boost(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled);
}
-static ssize_t store_boost(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count)
{
int ret, enable;
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -48,11 +48,11 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
/* Create attributes */
#define gov_sys_attr_ro(_name) \
-static struct global_attr _name##_gov_sys = \
+static struct kobj_attribute _name##_gov_sys = \
__ATTR(_name, 0444, show_##_name##_gov_sys, NULL)
#define gov_sys_attr_rw(_name) \
-static struct global_attr _name##_gov_sys = \
+static struct kobj_attribute _name##_gov_sys = \
__ATTR(_name, 0644, show_##_name##_gov_sys, store_##_name##_gov_sys)
#define gov_pol_attr_ro(_name) \
@@ -74,7 +74,7 @@ __ATTR(_name, 0644, show_##_name##_gov_p
/* Create show/store routines */
#define show_one(_gov, file_name) \
static ssize_t show_##file_name##_gov_sys \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
+(struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
{ \
struct _gov##_dbs_tuners *tuners = _gov##_dbs_cdata.gdbs_data->tuners; \
return sprintf(buf, "%u\n", tuners->file_name); \
@@ -90,7 +90,7 @@ static ssize_t show_##file_name##_gov_po
#define store_one(_gov, file_name) \
static ssize_t store_##file_name##_gov_sys \
-(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \
+(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t count) \
{ \
struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \
return store_##file_name(dbs_data, buf, count); \
@@ -254,7 +254,7 @@ static inline int delay_for_sampling_rat
#define declare_show_sampling_rate_min(_gov) \
static ssize_t show_sampling_rate_min_gov_sys \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
+(struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
{ \
struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \
return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -368,13 +368,13 @@ static void __init intel_pstate_debug_ex
/************************** sysfs begin ************************/
#define show_one(file_name, object) \
static ssize_t show_##file_name \
- (struct kobject *kobj, struct attribute *attr, char *buf) \
+ (struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
{ \
return sprintf(buf, "%u\n", limits->object); \
}
static ssize_t show_turbo_pct(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
struct cpudata *cpu;
int total, no_turbo, turbo_pct;
@@ -390,7 +390,7 @@ static ssize_t show_turbo_pct(struct kob
}
static ssize_t show_num_pstates(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
struct cpudata *cpu;
int total;
@@ -401,7 +401,7 @@ static ssize_t show_num_pstates(struct k
}
static ssize_t show_no_turbo(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
ssize_t ret;
@@ -414,7 +414,7 @@ static ssize_t show_no_turbo(struct kobj
return ret;
}
-static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
+static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
@@ -438,7 +438,7 @@ static ssize_t store_no_turbo(struct kob
return count;
}
-static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
@@ -463,7 +463,7 @@ static ssize_t store_max_perf_pct(struct
return count;
}
-static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -203,20 +203,12 @@ __ATTR(_name, _perm, show_##_name, NULL)
static struct freq_attr _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
-struct global_attr {
- struct attribute attr;
- ssize_t (*show)(struct kobject *kobj,
- struct attribute *attr, char *buf);
- ssize_t (*store)(struct kobject *a, struct attribute *b,
- const char *c, size_t count);
-};
-
#define define_one_global_ro(_name) \
-static struct global_attr _name = \
+static struct kobj_attribute _name = \
__ATTR(_name, 0444, show_##_name, NULL)
#define define_one_global_rw(_name) \
-static struct global_attr _name = \
+static struct kobj_attribute _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dd9ee3444014e8f28c0eefc9fffc9ac9c5248c12 ]
Recently we run a network test over ipcomp virtual tunnel.We find that
if a ipv4 packet needs fragment, then the peer can't receive
it.
We deep into the code and find that when packet need fragment the smaller
fragment will be encapsulated by ipip not ipcomp. So when the ipip packet
goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code
always set skb'dev to the last fragment's dev. After ipv4 defrag processing,
when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV
error.
This patch adds compatible support for the ipip process in ipcomp virtual tunnel.
Signed-off-by: Su Yanjun <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/ip_vti.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 4b7c81f88abf..fcf327ebd134 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -75,6 +75,33 @@ static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi,
return 0;
}
+static int vti_input_ipip(struct sk_buff *skb, int nexthdr, __be32 spi,
+ int encap_type)
+{
+ struct ip_tunnel *tunnel;
+ const struct iphdr *iph = ip_hdr(skb);
+ struct net *net = dev_net(skb->dev);
+ struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
+
+ tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+ iph->saddr, iph->daddr, 0);
+ if (tunnel) {
+ if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+ goto drop;
+
+ XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
+
+ skb->dev = tunnel->dev;
+
+ return xfrm_input(skb, nexthdr, spi, encap_type);
+ }
+
+ return -EINVAL;
+drop:
+ kfree_skb(skb);
+ return 0;
+}
+
static int vti_rcv(struct sk_buff *skb)
{
XFRM_SPI_SKB_CB(skb)->family = AF_INET;
@@ -83,6 +110,14 @@ static int vti_rcv(struct sk_buff *skb)
return vti_input(skb, ip_hdr(skb)->protocol, 0, 0);
}
+static int vti_rcv_ipip(struct sk_buff *skb)
+{
+ XFRM_SPI_SKB_CB(skb)->family = AF_INET;
+ XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
+
+ return vti_input_ipip(skb, ip_hdr(skb)->protocol, ip_hdr(skb)->saddr, 0);
+}
+
static int vti_rcv_cb(struct sk_buff *skb, int err)
{
unsigned short family;
@@ -409,6 +444,12 @@ static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = {
.priority = 100,
};
+static struct xfrm_tunnel ipip_handler __read_mostly = {
+ .handler = vti_rcv_ipip,
+ .err_handler = vti4_err,
+ .priority = 0,
+};
+
static int __net_init vti_init_net(struct net *net)
{
int err;
@@ -592,6 +633,13 @@ static int __init vti_init(void)
if (err < 0)
goto xfrm_proto_comp_failed;
+ msg = "ipip tunnel";
+ err = xfrm4_tunnel_register(&ipip_handler, AF_INET);
+ if (err < 0) {
+ pr_info("%s: cant't register tunnel\n",__func__);
+ goto xfrm_tunnel_failed;
+ }
+
msg = "netlink interface";
err = rtnl_link_register(&vti_link_ops);
if (err < 0)
@@ -601,6 +649,8 @@ static int __init vti_init(void)
rtnl_link_failed:
xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
+xfrm_tunnel_failed:
+ xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
xfrm_proto_comp_failed:
xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
xfrm_proto_ah_failed:
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]
The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.
Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <[email protected]>
Reviewed-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_core_main.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 533bd2467910..b40604d0126f 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2452,11 +2452,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx)
return rc;
}
-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q)
+static void qeth_free_output_queue(struct qeth_qdio_out_q *q)
{
if (!q)
return;
+ qeth_clear_outq_buffers(q, 1);
qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
kfree(q);
}
@@ -2529,10 +2530,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card)
card->qdio.out_qs[i]->bufs[j] = NULL;
}
out_freeoutq:
- while (i > 0) {
- qeth_free_qdio_out_buf(card->qdio.out_qs[--i]);
- qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
- }
+ while (i > 0)
+ qeth_free_output_queue(card->qdio.out_qs[--i]);
kfree(card->qdio.out_qs);
card->qdio.out_qs = NULL;
out_freepool:
@@ -2565,10 +2564,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card)
qeth_free_buffer_pool(card);
/* free outbound qdio_qs */
if (card->qdio.out_qs) {
- for (i = 0; i < card->qdio.no_out_queues; ++i) {
- qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
- qeth_free_qdio_out_buf(card->qdio.out_qs[i]);
- }
+ for (i = 0; i < card->qdio.no_out_queues; i++)
+ qeth_free_output_queue(card->qdio.out_qs[i]);
kfree(card->qdio.out_qs);
card->qdio.out_qs = NULL;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]
Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
Call Trace:
efi_runtime_map_copy+0x28/0x30
bzImage64_load+0x688/0x872
arch_kexec_kernel_image_load+0x6d/0x70
kimage_file_alloc_init+0x13e/0x220
__x64_sys_kexec_file_load+0x144/0x290
do_syscall_64+0x55/0x1a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Just skip the EFI info setup if EFI runtime services are not enabled.
[ bp: Massage commit message. ]
Suggested-by: Dave Young <[email protected]>
Signed-off-by: Kairui Song <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Young <[email protected]>
Cc: AKASHI Takahiro <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: [email protected]
Cc: David Howells <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Philipp Rudo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yannik Sembritzki <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/kexec-bzimage64.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 0f8a6bbaaa44..0bf17576dd2a 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -168,6 +168,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
struct efi_info *current_ei = &boot_params.efi_info;
struct efi_info *ei = ¶ms->efi_info;
+ if (!efi_enabled(EFI_RUNTIME_SERVICES))
+ return 0;
+
if (!current_ei->efi_memmap_size)
return 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]
Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.
This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.
Signed-off-by: Jun-Ru Chang <[email protected]>
Signed-off-by: Tony Wu <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/process.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ebd8a715fe38..e6102775892d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -339,7 +339,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip)
static int get_frame_info(struct mips_frame_info *info)
{
bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
- union mips_instruction insn, *ip, *ip_end;
+ union mips_instruction insn, *ip;
const unsigned int max_insns = 128;
unsigned int last_insn_size = 0;
unsigned int i;
@@ -351,10 +351,9 @@ static int get_frame_info(struct mips_frame_info *info)
if (!ip)
goto err;
- ip_end = (void *)ip + info->func_size;
-
- for (i = 0; i < max_insns && ip < ip_end; i++) {
+ for (i = 0; i < max_insns; i++) {
ip = (void *)ip + last_insn_size;
+
if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
insn.halfword[0] = 0;
insn.halfword[1] = ip->halfword[0];
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 25384ce5f9530def39421597b1457d9462df6455 ]
This fixes the following warning at boot when the kernel is booted on a
board with more CPU cores than was configured in NR_CPUS:
smp_init_cpus: Core Count = 8
smp_init_cpus: Core Id = 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124
Call Trace:
__warn$part$3+0x6a/0x7c
warn_slowpath_null+0x35/0x3c
smp_init_cpus+0x54/0x74
setup_arch+0x1c0/0x1d0
start_kernel+0x44/0x310
_startup+0x107/0x107
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/kernel/smp.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 0e34c1ed4aa8..54bb8e0473a0 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -93,6 +93,11 @@ void __init smp_init_cpus(void)
pr_info("%s: Core Count = %d\n", __func__, ncpus);
pr_info("%s: Core Id = %d\n", __func__, core_id);
+ if (ncpus > NR_CPUS) {
+ ncpus = NR_CPUS;
+ pr_info("%s: limiting core count by %d\n", __func__, ncpus);
+ }
+
for (i = 0; i < ncpus; ++i)
set_cpu_possible(i, true);
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gerecke <[email protected]>
commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.
Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:
$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0
https://github.com/linuxwacom/xf86-input-wacom/issues/40
Signed-off-by: Jason Gerecke <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/wacom_serial4.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/input/tablet/wacom_serial4.c
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -187,6 +187,7 @@ enum {
MODEL_DIGITIZER_II = 0x5544, /* UD */
MODEL_GRAPHIRE = 0x4554, /* ET */
MODEL_PENPARTNER = 0x4354, /* CT */
+ MODEL_ARTPAD_II = 0x4B54, /* KT */
};
static void wacom_handle_model_response(struct wacom *wacom)
@@ -245,6 +246,7 @@ static void wacom_handle_model_response(
wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
break;
+ case MODEL_ARTPAD_II:
case MODEL_DIGITIZER_II:
wacom->dev->name = "Wacom Digitizer II";
wacom->dev->id.version = MODEL_DIGITIZER_II;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
[ Upstream commit 58bdd544e2933a21a51eecf17c3f5f94038261b5 ]
KASAN report this:
BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc]
Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401
CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
kasan_report+0x171/0x18d mm/kasan/report.c:321
memcpy+0x1f/0x50 mm/kasan/common.c:130
nfc_llcp_build_gb+0x37f/0x540 [nfc]
nfc_llcp_register_device+0x6eb/0xb50 [nfc]
nfc_register_device+0x50/0x1d0 [nfc]
nfcsim_device_new+0x394/0x67d [nfcsim]
? 0xffffffffc1080000
nfcsim_init+0x6b/0x1000 [nfcsim]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
nfc_llcp_build_tlv will return NULL on fails, caller should check it,
otherwise will trigger a NULL dereference.
Reported-by: Hulk Robot <[email protected]>
Fixes: eda21f16a5ed ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_commands.c | 20 ++++++++++++++++++++
net/nfc/llcp_core.c | 24 ++++++++++++++++++++----
2 files changed, 40 insertions(+), 4 deletions(-)
--- a/net/nfc/llcp_commands.c
+++ b/net/nfc/llcp_commands.c
@@ -419,6 +419,10 @@ int nfc_llcp_send_connect(struct nfc_llc
sock->service_name,
sock->service_name_len,
&service_name_tlv_length);
+ if (!service_name_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += service_name_tlv_length;
}
@@ -429,9 +433,17 @@ int nfc_llcp_send_connect(struct nfc_llc
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
&miux_tlv_length);
+ if (!miux_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += miux_tlv_length;
rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+ if (!rw_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += rw_tlv_length;
pr_debug("SKB size %d SN length %zu\n", size, sock->service_name_len);
@@ -486,9 +498,17 @@ int nfc_llcp_send_cc(struct nfc_llcp_soc
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
&miux_tlv_length);
+ if (!miux_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += miux_tlv_length;
rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+ if (!rw_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += rw_tlv_length;
skb = llcp_allocate_pdu(sock, LLCP_PDU_CC, size);
--- a/net/nfc/llcp_core.c
+++ b/net/nfc/llcp_core.c
@@ -532,10 +532,10 @@ static u8 nfc_llcp_reserve_sdp_ssap(stru
static int nfc_llcp_build_gb(struct nfc_llcp_local *local)
{
- u8 *gb_cur, *version_tlv, version, version_length;
- u8 *lto_tlv, lto_length;
- u8 *wks_tlv, wks_length;
- u8 *miux_tlv, miux_length;
+ u8 *gb_cur, version, version_length;
+ u8 lto_length, wks_length, miux_length;
+ u8 *version_tlv = NULL, *lto_tlv = NULL,
+ *wks_tlv = NULL, *miux_tlv = NULL;
__be16 wks = cpu_to_be16(local->local_wks);
u8 gb_len = 0;
int ret = 0;
@@ -543,17 +543,33 @@ static int nfc_llcp_build_gb(struct nfc_
version = LLCP_VERSION_11;
version_tlv = nfc_llcp_build_tlv(LLCP_TLV_VERSION, &version,
1, &version_length);
+ if (!version_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += version_length;
lto_tlv = nfc_llcp_build_tlv(LLCP_TLV_LTO, &local->lto, 1, <o_length);
+ if (!lto_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += lto_length;
pr_debug("Local wks 0x%lx\n", local->local_wks);
wks_tlv = nfc_llcp_build_tlv(LLCP_TLV_WKS, (u8 *)&wks, 2, &wks_length);
+ if (!wks_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += wks_length;
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&local->miux, 0,
&miux_length);
+ if (!miux_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += miux_length;
gb_len += ARRAY_SIZE(llcp_magic);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0ee4b5f801b73b83a9fb3921d725f2162fd4a2e5 ]
Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.
SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.
Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
Selected by [y]:
- SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]
Signed-off-by: Sinan Kaya <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 988ebe9a6b90..953974b5a9a9 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -881,6 +881,7 @@ config INTEL_OAKTRAIL
config SAMSUNG_Q10
tristate "Samsung Q10 Extras"
depends on ACPI
+ depends on BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for backlight control on Samsung Q10
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]
devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.
Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <[email protected]>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/plat-pxa/ssp.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index daa1a65f2eb7..6748827c2ec8 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -238,8 +238,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
if (ssp == NULL)
return -ENODEV;
- iounmap(ssp->mmio_base);
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
@@ -249,7 +247,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
list_del(&ssp->node);
mutex_unlock(&ssp_lock);
- kfree(ssp);
return 0;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6571ebce112a21ec9be68ef2f53b96fcd41fd81b ]
If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.
Signed-off-by: Tomonori Sakita <[email protected]>
Signed-off-by: Atsushi Nemoto <[email protected]>
Reviewed-by: Dalon L Westergreen <[email protected]>
Acked-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/altera/altera_msgdma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c
index 0fb986ba3290..0ae723f75341 100644
--- a/drivers/net/ethernet/altera/altera_msgdma.c
+++ b/drivers/net/ethernet/altera/altera_msgdma.c
@@ -145,7 +145,8 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv)
& 0xffff;
if (inuse) { /* Tx FIFO is not empty */
- ready = priv->tx_prod - priv->tx_cons - inuse - 1;
+ ready = max_t(int,
+ priv->tx_prod - priv->tx_cons - inuse - 1, 0);
} else {
/* Check for buffered last packet */
status = csrrd32(priv->tx_dma_csr, msgdma_csroffs(status));
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 904bba211acc2112fdf866e5a2bc6cd9ecd0de1b ]
The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.
The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.
Remove the extra subtraction when handling the opcode.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Brian Welty <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qib/qib_ud.c | 1 -
drivers/staging/rdma/hfi1/ud.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index 59193f67ea78..56bd59bc08b5 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -515,7 +515,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
wc.ex.imm_data = ohdr->u.ud.imm_data;
wc.wc_flags = IB_WC_WITH_IMM;
- tlen -= sizeof(u32);
} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
wc.ex.imm_data = 0;
wc.wc_flags = 0;
diff --git a/drivers/staging/rdma/hfi1/ud.c b/drivers/staging/rdma/hfi1/ud.c
index 5a9c784bec04..a88e37444be0 100644
--- a/drivers/staging/rdma/hfi1/ud.c
+++ b/drivers/staging/rdma/hfi1/ud.c
@@ -793,7 +793,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet)
opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
wc.ex.imm_data = ohdr->u.ud.imm_data;
wc.wc_flags = IB_WC_WITH_IMM;
- tlen -= sizeof(u32);
} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
wc.ex.imm_data = 0;
wc.wc_flags = 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cec8abba13e6a26729dfed41019720068eeeff2b ]
When reading phy registers via Clause 45 MDIO protocol, after write
address operation, the driver use another write address operation, so
can not read the right value of any phy registers. This patch fixes it.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index 37491c85bc42..6ff13c559e52 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -319,7 +319,7 @@ static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
}
hns_mdio_cmd_write(mdio_dev, is_c45,
- MDIO_C45_WRITE_ADDR, phy_id, devad);
+ MDIO_C45_READ, phy_id, devad);
}
/* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mao Wenan <[email protected]>
[ Upstream commit 6caabe7f197d3466d238f70915d65301f1716626 ]
If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to
add port, it directly returns res and forgets to free the node
that allocated in hsr_create_self_node(), and forgets to delete
the node->mac_list linked in hsr->self_node_db.
BUG: memory leak
unreferenced object 0xffff8881cfa0c780 (size 64):
comm "syz-executor.0", pid 2077, jiffies 4294717969 (age 2415.377s)
hex dump (first 32 bytes):
e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................
00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I.............
backtrace:
[<00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr]
[<000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr]
[<000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182
[<000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240
[<00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130
[<000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477
[<00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
[<00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336
[<000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917
[<0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline]
[<0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631
[<00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786
[<00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline]
[<00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline]
[<00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794
[<00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
[<00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e01dacb3>] 0xffffffffffffffff
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_device.c | 4 +++-
net/hsr/hsr_framereg.c | 12 ++++++++++++
net/hsr/hsr_framereg.h | 1 +
3 files changed, 16 insertions(+), 1 deletion(-)
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -477,7 +477,7 @@ int hsr_dev_finalize(struct net_device *
res = hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER);
if (res)
- return res;
+ goto err_add_port;
res = register_netdevice(hsr_dev);
if (res)
@@ -498,6 +498,8 @@ int hsr_dev_finalize(struct net_device *
fail:
hsr_for_each_port(hsr, port)
hsr_del_port(port);
+err_add_port:
+ hsr_del_node(&hsr->self_node_db);
return res;
}
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -124,6 +124,18 @@ int hsr_create_self_node(struct list_hea
return 0;
}
+void hsr_del_node(struct list_head *self_node_db)
+{
+ struct hsr_node *node;
+
+ rcu_read_lock();
+ node = list_first_or_null_rcu(self_node_db, struct hsr_node, mac_list);
+ rcu_read_unlock();
+ if (node) {
+ list_del_rcu(&node->mac_list);
+ kfree(node);
+ }
+}
/* Allocate an hsr_node and add it to node_db. 'addr' is the node's AddressA;
* seq_out is used to initialize filtering of outgoing duplicate frames
--- a/net/hsr/hsr_framereg.h
+++ b/net/hsr/hsr_framereg.h
@@ -16,6 +16,7 @@
struct hsr_node;
+void hsr_del_node(struct list_head *self_node_db);
struct hsr_node *hsr_add_node(struct list_head *node_db, unsigned char addr[],
u16 seq_out);
struct hsr_node *hsr_get_node(struct list_head *node_db, struct sk_buff *skb,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4fe8713b873fc881284722ce4ac47995de7cf62c ]
ccount_timer_shutdown is called from the atomic context in the
secondary_start_kernel, resulting in the following BUG:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
Preemption disabled at:
secondary_start_kernel+0xa1/0x130
Call Trace:
___might_sleep+0xe7/0xfc
__might_sleep+0x41/0x44
synchronize_irq+0x24/0x64
disable_irq+0x11/0x14
ccount_timer_shutdown+0x12/0x20
clockevents_switch_state+0x82/0xb4
clockevents_exchange_device+0x54/0x60
tick_check_new_device+0x46/0x70
clockevents_register_device+0x8c/0xc8
clockevents_config_and_register+0x1d/0x2c
local_timer_setup+0x75/0x7c
secondary_start_kernel+0xb4/0x130
should_never_return+0x32/0x35
Use disable_irq_nosync instead of disable_irq to avoid it.
This is safe because the ccount timer IRQ is per-CPU, and once IRQ is
masked the ISR will not be called.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/kernel/time.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index b9ad9feadc2d..a992cb6a47db 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -87,7 +87,7 @@ static int ccount_timer_shutdown(struct clock_event_device *evt)
container_of(evt, struct ccount_timer, evt);
if (timer->irq_enabled) {
- disable_irq(evt->irq);
+ disable_irq_nosync(evt->irq);
timer->irq_enabled = 0;
}
return 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]
The issue to be fixed in this commit is when libfc found it received a
invalid FLOGI response from FC switch, it would return without freeing the
fc frame, which is just the skb data. This would cause memory leak if FC
switch keeps sending invalid FLOGI responses.
This fix is just to make it execute `fc_frame_free(fp)` before returning
from function `fc_lport_flogi_resp`.
Signed-off-by: Ming Lu <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libfc/fc_lport.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e01a29863c38..867fc036d6ef 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1739,14 +1739,14 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
fc_frame_payload_op(fp) != ELS_LS_ACC) {
FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
fc_lport_error(lport, fp);
- goto err;
+ goto out;
}
flp = fc_frame_payload_get(fp, sizeof(*flp));
if (!flp) {
FC_LPORT_DBG(lport, "FLOGI bad response\n");
fc_lport_error(lport, fp);
- goto err;
+ goto out;
}
mfs = ntohs(flp->fl_csp.sp_bb_data) &
@@ -1756,7 +1756,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
"lport->mfs:%hu\n", mfs, lport->mfs);
fc_lport_error(lport, fp);
- goto err;
+ goto out;
}
if (mfs <= lport->mfs) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 32a7726c4f4aadfabdb82440d84f88a5a2c8fe13 ]
- add missing memory barriers to the secondary CPU synchronization spin
loops; add comment to the matching memory barrier in the boot_secondary
and __cpu_die functions;
- use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount
instead of reading/writing them directly;
- re-initialize cpu_running every time before starting secondary CPU to
flush possible previous CPU startup results.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/kernel/head.S | 5 ++++-
arch/xtensa/kernel/smp.c | 34 +++++++++++++++++++++-------------
2 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index c7b3bedbfffe..e3823b4f9d08 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -286,12 +286,13 @@ should_never_return:
movi a2, cpu_start_ccount
1:
+ memw
l32i a3, a2, 0
beqi a3, 0, 1b
movi a3, 0
s32i a3, a2, 0
- memw
1:
+ memw
l32i a3, a2, 0
beqi a3, 0, 1b
wsr a3, ccount
@@ -328,11 +329,13 @@ ENTRY(cpu_restart)
rsr a0, prid
neg a2, a0
movi a3, cpu_start_id
+ memw
s32i a2, a3, 0
#if XCHAL_DCACHE_IS_WRITEBACK
dhwbi a3, 0
#endif
1:
+ memw
l32i a2, a3, 0
dhi a3, 0
bne a2, a0, 1b
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 4d02e38514f5..545144d1431d 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -192,9 +192,11 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
int i;
#ifdef CONFIG_HOTPLUG_CPU
- cpu_start_id = cpu;
- system_flush_invalidate_dcache_range(
- (unsigned long)&cpu_start_id, sizeof(cpu_start_id));
+ WRITE_ONCE(cpu_start_id, cpu);
+ /* Pairs with the third memw in the cpu_restart */
+ mb();
+ system_flush_invalidate_dcache_range((unsigned long)&cpu_start_id,
+ sizeof(cpu_start_id));
#endif
smp_call_function_single(0, mx_cpu_start, (void *)cpu, 1);
@@ -203,18 +205,21 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
ccount = get_ccount();
while (!ccount);
- cpu_start_ccount = ccount;
+ WRITE_ONCE(cpu_start_ccount, ccount);
- while (time_before(jiffies, timeout)) {
+ do {
+ /*
+ * Pairs with the first two memws in the
+ * .Lboot_secondary.
+ */
mb();
- if (!cpu_start_ccount)
- break;
- }
+ ccount = READ_ONCE(cpu_start_ccount);
+ } while (ccount && time_before(jiffies, timeout));
- if (cpu_start_ccount) {
+ if (ccount) {
smp_call_function_single(0, mx_cpu_stop,
- (void *)cpu, 1);
- cpu_start_ccount = 0;
+ (void *)cpu, 1);
+ WRITE_ONCE(cpu_start_ccount, 0);
return -EIO;
}
}
@@ -234,6 +239,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
pr_debug("%s: Calling wakeup_secondary(cpu:%d, idle:%p, sp: %08lx)\n",
__func__, cpu, idle, start_info.stack);
+ init_completion(&cpu_running);
ret = boot_secondary(cpu, idle);
if (ret == 0) {
wait_for_completion_timeout(&cpu_running,
@@ -295,8 +301,10 @@ void __cpu_die(unsigned int cpu)
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
while (time_before(jiffies, timeout)) {
system_invalidate_dcache_range((unsigned long)&cpu_start_id,
- sizeof(cpu_start_id));
- if (cpu_start_id == -cpu) {
+ sizeof(cpu_start_id));
+ /* Pairs with the second memw in the cpu_restart */
+ mb();
+ if (READ_ONCE(cpu_start_id) == -cpu) {
platform_cpu_kill(cpu);
return;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 95d6ebd53c79522bf9502dbc7e89e0d63f94dae4 ]
In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.
Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.
syzbot report :
BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854
CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
x25_kill_by_device net/x25/af_x25.c:217 [inline]
x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669
Allocated by task 7843:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
kmalloc include/linux/slab.h:545 [inline]
x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 7865:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
__cache_free mm/slab.c:3494 [inline]
kfree+0xcf/0x230 mm/slab.c:3811
x25_neigh_put include/net/x25.h:253 [inline]
x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
__sys_connect+0x266/0x330 net/socket.c:1685
__do_sys_connect net/socket.c:1696 [inline]
__se_sys_connect net/socket.c:1693 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1693
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880a030edc0
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: [email protected]
Cc: andrew hendry <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/x25/af_x25.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -812,8 +812,12 @@ static int x25_connect(struct socket *so
sock->state = SS_CONNECTED;
rc = 0;
out_put_neigh:
- if (rc)
+ if (rc) {
+ read_lock_bh(&x25_list_lock);
x25_neigh_put(x25->neighbour);
+ x25->neighbour = NULL;
+ read_unlock_bh(&x25_list_lock);
+ }
out_put_route:
x25_route_put(rt);
out:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 9417d81f4f8adfe20a12dd1fadf73a618cbd945d ]
sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect,
so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct,
otherwise, the dst refcnt will leak.
It can be reproduced by this syz log:
r1 = socket$pptp(0x18, 0x1, 0x2)
bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e)
connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e)
Consecutive dmesg warnings will occur:
unregister_netdevice: waiting for lo to become free. Usage count = 1
v1->v2:
- use rcu_dereference_protected() instead of rcu_dereference_check(),
as suggested by Eric.
Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Reported-by: Xiumei Mu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/pptp.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -577,6 +577,7 @@ static void pptp_sock_destruct(struct so
pppox_unbind_sock(sk);
}
skb_queue_purge(&sk->sk_receive_queue);
+ dst_release(rcu_dereference_protected(sk->sk_dst_cache, 1));
}
static int pptp_create(struct net *net, struct socket *sock, int kern)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit 38d589f2fd08f1296aea3ce62bebd185125c6d81 upstream.
With the ultimate goal of keeping rt_mutex wait_list and futex_q waiters
consistent it's necessary to split 'rt_mutex_futex_lock()' into finer
parts, such that only the actual blocking can be done without hb->lock
held.
Split split_mutex_finish_proxy_lock() into two parts, one that does the
blocking and one that does remove_waiter() when the lock acquire failed.
When the rtmutex was acquired successfully the waiter can be removed in the
acquisiton path safely, since there is no concurrency on the lock owner.
This means that, except for futex_lock_pi(), all wait_list modifications
are done with both hb->lock and wait_lock held.
[[email protected]: fix for futex_requeue_pi_signal_restart]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/futex.c | 7 +++--
kernel/locking/rtmutex.c | 52 ++++++++++++++++++++++++++++++++++------
kernel/locking/rtmutex_common.h | 8 +++---
3 files changed, 55 insertions(+), 12 deletions(-)
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2923,10 +2923,13 @@ static int futex_wait_requeue_pi(u32 __u
*/
WARN_ON(!q.pi_state);
pi_mutex = &q.pi_state->pi_mutex;
- ret = rt_mutex_finish_proxy_lock(pi_mutex, to, &rt_waiter);
- debug_rt_mutex_free_waiter(&rt_waiter);
+ ret = rt_mutex_wait_proxy_lock(pi_mutex, to, &rt_waiter);
spin_lock(q.lock_ptr);
+ if (ret && !rt_mutex_cleanup_proxy_lock(pi_mutex, &rt_waiter))
+ ret = 0;
+
+ debug_rt_mutex_free_waiter(&rt_waiter);
/*
* Fixup the pi_state owner and possibly acquire the lock if we
* haven't already.
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -1712,21 +1712,23 @@ struct task_struct *rt_mutex_next_owner(
}
/**
- * rt_mutex_finish_proxy_lock() - Complete lock acquisition
+ * rt_mutex_wait_proxy_lock() - Wait for lock acquisition
* @lock: the rt_mutex we were woken on
* @to: the timeout, null if none. hrtimer should already have
* been started.
* @waiter: the pre-initialized rt_mutex_waiter
*
- * Complete the lock acquisition started our behalf by another thread.
+ * Wait for the the lock acquisition started on our behalf by
+ * rt_mutex_start_proxy_lock(). Upon failure, the caller must call
+ * rt_mutex_cleanup_proxy_lock().
*
* Returns:
* 0 - success
* <0 - error, one of -EINTR, -ETIMEDOUT
*
- * Special API call for PI-futex requeue support
+ * Special API call for PI-futex support
*/
-int rt_mutex_finish_proxy_lock(struct rt_mutex *lock,
+int rt_mutex_wait_proxy_lock(struct rt_mutex *lock,
struct hrtimer_sleeper *to,
struct rt_mutex_waiter *waiter)
{
@@ -1739,9 +1741,6 @@ int rt_mutex_finish_proxy_lock(struct rt
/* sleep on the mutex */
ret = __rt_mutex_slowlock(lock, TASK_INTERRUPTIBLE, to, waiter);
- if (unlikely(ret))
- remove_waiter(lock, waiter);
-
/*
* try_to_take_rt_mutex() sets the waiter bit unconditionally. We might
* have to fix that up.
@@ -1752,3 +1751,42 @@ int rt_mutex_finish_proxy_lock(struct rt
return ret;
}
+
+/**
+ * rt_mutex_cleanup_proxy_lock() - Cleanup failed lock acquisition
+ * @lock: the rt_mutex we were woken on
+ * @waiter: the pre-initialized rt_mutex_waiter
+ *
+ * Attempt to clean up after a failed rt_mutex_wait_proxy_lock().
+ *
+ * Unless we acquired the lock; we're still enqueued on the wait-list and can
+ * in fact still be granted ownership until we're removed. Therefore we can
+ * find we are in fact the owner and must disregard the
+ * rt_mutex_wait_proxy_lock() failure.
+ *
+ * Returns:
+ * true - did the cleanup, we done.
+ * false - we acquired the lock after rt_mutex_wait_proxy_lock() returned,
+ * caller should disregards its return value.
+ *
+ * Special API call for PI-futex support
+ */
+bool rt_mutex_cleanup_proxy_lock(struct rt_mutex *lock,
+ struct rt_mutex_waiter *waiter)
+{
+ bool cleanup = false;
+
+ raw_spin_lock_irq(&lock->wait_lock);
+ /*
+ * Unless we're the owner; we're still enqueued on the wait_list.
+ * So check if we became owner, if not, take us off the wait_list.
+ */
+ if (rt_mutex_owner(lock) != current) {
+ remove_waiter(lock, waiter);
+ fixup_rt_mutex_waiters(lock);
+ cleanup = true;
+ }
+ raw_spin_unlock_irq(&lock->wait_lock);
+
+ return cleanup;
+}
--- a/kernel/locking/rtmutex_common.h
+++ b/kernel/locking/rtmutex_common.h
@@ -106,9 +106,11 @@ extern void rt_mutex_proxy_unlock(struct
extern int rt_mutex_start_proxy_lock(struct rt_mutex *lock,
struct rt_mutex_waiter *waiter,
struct task_struct *task);
-extern int rt_mutex_finish_proxy_lock(struct rt_mutex *lock,
- struct hrtimer_sleeper *to,
- struct rt_mutex_waiter *waiter);
+extern int rt_mutex_wait_proxy_lock(struct rt_mutex *lock,
+ struct hrtimer_sleeper *to,
+ struct rt_mutex_waiter *waiter);
+extern bool rt_mutex_cleanup_proxy_lock(struct rt_mutex *lock,
+ struct rt_mutex_waiter *waiter);
extern int rt_mutex_timed_futex_lock(struct rt_mutex *l, struct hrtimer_sleeper *to);
extern bool rt_mutex_futex_unlock(struct rt_mutex *lock,
struct wake_q_head *wqh);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]
atchan->status variable is used to store two different information:
- pass channel interrupts status from interrupt handler to tasklet;
- channel information like whether it is cyclic or paused;
This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:
if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
dev_err(chan2dev(chan), "channel currently used\n");
return NULL;
}
This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/at_xdmac.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 82a7c89caae2..af24c5bf32d6 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
u32 save_cim;
u32 save_cnda;
u32 save_cndc;
+ u32 irq_status;
unsigned long status;
struct tasklet_struct tasklet;
struct dma_slave_config sconfig;
@@ -1582,8 +1583,8 @@ static void at_xdmac_tasklet(unsigned long data)
struct at_xdmac_desc *desc;
u32 error_mask;
- dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
- __func__, atchan->status);
+ dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+ __func__, atchan->irq_status);
error_mask = AT_XDMAC_CIS_RBEIS
| AT_XDMAC_CIS_WBEIS
@@ -1591,15 +1592,15 @@ static void at_xdmac_tasklet(unsigned long data)
if (at_xdmac_chan_is_cyclic(atchan)) {
at_xdmac_handle_cyclic(atchan);
- } else if ((atchan->status & AT_XDMAC_CIS_LIS)
- || (atchan->status & error_mask)) {
+ } else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+ || (atchan->irq_status & error_mask)) {
struct dma_async_tx_descriptor *txd;
- if (atchan->status & AT_XDMAC_CIS_RBEIS)
+ if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
dev_err(chan2dev(&atchan->chan), "read bus error!!!");
- if (atchan->status & AT_XDMAC_CIS_WBEIS)
+ if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
dev_err(chan2dev(&atchan->chan), "write bus error!!!");
- if (atchan->status & AT_XDMAC_CIS_ROIS)
+ if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
spin_lock_bh(&atchan->lock);
@@ -1654,7 +1655,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
atchan = &atxdmac->chan[i];
chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
- atchan->status = chan_status & chan_imr;
+ atchan->irq_status = chan_status & chan_imr;
dev_vdbg(atxdmac->dma.dev,
"%s: chan%d: imr=0x%x, status=0x%x\n",
__func__, i, chan_imr, chan_status);
@@ -1668,7 +1669,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
- if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+ if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
tasklet_schedule(&atchan->tasklet);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masaru Nagai <[email protected]>
[ Upstream commit ae9819e339b451da7a86ab6fe38ecfcb6814e78a ]
Hardware has the CBS (Credit Based Shaper) which affects only Q3
and Q2. When updating the CBS settings, even if the driver does so
after waiting for Tx DMA finished, there is a possibility that frame
data still remains in TxFIFO.
To avoid this, decrease TxFIFO depth of Q3 and Q2 to one.
This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM
and UDP_STREAM tests run on an Ebisu board. No performance change was
detected, outside of noise in the tests, both in terms of throughput and
CPU utilisation.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Masaru Nagai <[email protected]>
Signed-off-by: Kazuya Mizuguchi <[email protected]>
[simon: updated changelog]
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/renesas/ravb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -453,7 +453,7 @@ static int ravb_dmac_init(struct net_dev
ravb_write(ndev, RCR_EFFS | RCR_ENCF | RCR_ETS0 | 0x18000000, RCR);
/* Set FIFO size */
- ravb_write(ndev, TGC_TQP_AVBMODE1 | 0x00222200, TGC);
+ ravb_write(ndev, TGC_TQP_AVBMODE1 | 0x00112200, TGC);
/* Timestamp enable */
ravb_write(ndev, TCCR_TFEN, TCCR);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <[email protected]>
commit b301f2538759933cf9ff1f7c4f968da72e3f0757 upstream.
Make sure the table names via getsockopt GET_ENTRIES is nul-terminated
in ebtables and all the x_tables variants and their respective compat
code. Uncovered by KASAN.
Reported-by: Baozeng Ding <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/netfilter/ebtables.c | 4 ++++
net/ipv4/netfilter/arp_tables.c | 2 ++
net/ipv4/netfilter/ip_tables.c | 2 ++
net/ipv6/netfilter/ip6_tables.c | 2 ++
4 files changed, 10 insertions(+)
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1528,6 +1528,8 @@ static int do_ebt_get_ctl(struct sock *s
if (copy_from_user(&tmp, user, sizeof(tmp)))
return -EFAULT;
+ tmp.name[sizeof(tmp.name) - 1] = '\0';
+
t = find_table_lock(net, tmp.name, &ret, &ebt_mutex);
if (!t)
return ret;
@@ -2368,6 +2370,8 @@ static int compat_do_ebt_get_ctl(struct
if (copy_from_user(&tmp, user, sizeof(tmp)))
return -EFAULT;
+ tmp.name[sizeof(tmp.name) - 1] = '\0';
+
t = find_table_lock(net, tmp.name, &ret, &ebt_mutex);
if (!t)
return ret;
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -983,6 +983,7 @@ static int get_entries(struct net *net,
sizeof(struct arpt_get_entries) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
t = xt_find_table_lock(net, NFPROTO_ARP, get.name);
if (!IS_ERR_OR_NULL(t)) {
@@ -1557,6 +1558,7 @@ static int compat_get_entries(struct net
*len, sizeof(get) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
xt_compat_lock(NFPROTO_ARP);
t = xt_find_table_lock(net, NFPROTO_ARP, get.name);
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1171,6 +1171,7 @@ get_entries(struct net *net, struct ipt_
*len, sizeof(get) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
t = xt_find_table_lock(net, AF_INET, get.name);
if (!IS_ERR_OR_NULL(t)) {
@@ -1799,6 +1800,7 @@ compat_get_entries(struct net *net, stru
*len, sizeof(get) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
xt_compat_lock(AF_INET);
t = xt_find_table_lock(net, AF_INET, get.name);
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1182,6 +1182,7 @@ get_entries(struct net *net, struct ip6t
*len, sizeof(get) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
t = xt_find_table_lock(net, AF_INET6, get.name);
if (!IS_ERR_OR_NULL(t)) {
@@ -1800,6 +1801,7 @@ compat_get_entries(struct net *net, stru
*len, sizeof(get) + get.size);
return -EINVAL;
}
+ get.name[sizeof(get.name) - 1] = '\0';
xt_compat_lock(AF_INET6);
t = xt_find_table_lock(net, AF_INET6, get.name);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a8e911d13540487942d53137c156bd7707f66e5d ]
If the kernel is configured with KASAN_EXTRA, the stack size is
increasted significantly because this option sets "-fstack-reuse" to
"none" in GCC [1]. As a result, it triggers stack overrun quite often
with 32k stack size compiled using GCC 8. For example, this reproducer
https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c
triggers a "corrupted stack end detected inside scheduler" very reliably
with CONFIG_SCHED_STACK_END_CHECK enabled.
There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks. Some noticiable ones
are
size
7648 shrink_page_list
3584 xfs_rmap_convert
3312 migrate_page_move_mapping
3312 dev_ethtool
3200 migrate_misplaced_transhuge_page
3168 copy_process
There are other 49 functions are over 2k in size while compiling kernel
with "-Wframe-larger-than=" even with a related minimal config on this
machine. Hence, it is too much work to change Makefiles for each object
to compile without "-fsanitize-address-use-after-scope" individually.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23
Although there is a patch in GCC 9 to help the situation, GCC 9 probably
won't be released in a few months and then it probably take another
6-month to 1-year for all major distros to include it as a default.
Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020
when GCC 9 is everywhere. Until then, this patch will help users avoid
stack overrun.
This has already been fixed for arm64 for the same reason via
6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA").
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/page_64_types.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 4928cf0d5af0..fb1251946b45 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -2,7 +2,11 @@
#define _ASM_X86_PAGE_64_DEFS_H
#ifdef CONFIG_KASAN
+#ifdef CONFIG_KASAN_EXTRA
+#define KASAN_STACK_ORDER 2
+#else
#define KASAN_STACK_ORDER 1
+#endif
#else
#define KASAN_STACK_ORDER 0
#endif
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miaohe Lin <[email protected]>
[ Upstream commit a843dc4ebaecd15fca1f4d35a97210f72ea1473b ]
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.
UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: linmiaohe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -772,8 +772,9 @@ static bool check_6rd(struct ip_tunnel *
pbw0 = tunnel->ip6rd.prefixlen >> 5;
pbi0 = tunnel->ip6rd.prefixlen & 0x1f;
- d = (ntohl(v6dst->s6_addr32[pbw0]) << pbi0) >>
- tunnel->ip6rd.relay_prefixlen;
+ d = tunnel->ip6rd.relay_prefixlen < 32 ?
+ (ntohl(v6dst->s6_addr32[pbw0]) << pbi0) >>
+ tunnel->ip6rd.relay_prefixlen : 0;
pbi1 = pbi0 - tunnel->ip6rd.relay_prefixlen;
if (pbi1 > 0)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 24feb47c5fa5b825efb0151f28906dfdad027e61 ]
If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized. This may lead
to VM_BUG_ON due to uninitialized struct pages access from
test_pages_in_a_zone() function triggered by memory_hotplug sysfs
handlers.
Here are the the panic examples:
CONFIG_DEBUG_VM_PGFLAGS=y
kernel parameter mem=2050M
--------------------------
page:000003d082008000 is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
Call Trace:
test_pages_in_a_zone+0xde/0x160
show_valid_zones+0x5c/0x190
dev_attr_show+0x34/0x70
sysfs_kf_seq_show+0xc8/0x148
seq_read+0x204/0x480
__vfs_read+0x32/0x178
vfs_read+0x82/0x138
ksys_read+0x5a/0xb0
system_call+0xdc/0x2d8
Last Breaking-Event-Address:
test_pages_in_a_zone+0xde/0x160
Kernel panic - not syncing: Fatal exception: panic_on_oops
Fix this by checking whether the pfn to check is within the zone.
[[email protected]: separated this change from http://lkml.kernel.org/r/[email protected]]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: separated this change from
http://lkml.kernel.org/r/[email protected]]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Mikhail Zaslonko <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Tested-by: Gerald Schaefer <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Mikhail Gavrilov <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memory_hotplug.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 153acbf5f83d..804cbfe9132d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1399,6 +1399,9 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn,
i++;
if (i == MAX_ORDER_NR_PAGES)
continue;
+ /* Check if we got outside of the zone */
+ if (zone && !zone_spans_pfn(zone, pfn + i))
+ return 0;
page = pfn_to_page(pfn + i);
if (zone && page_zone(page) != zone)
return 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/iscsi_ibft.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -513,6 +513,7 @@ static umode_t __init ibft_check_tgt_for
case ISCSI_BOOT_TGT_NIC_ASSOC:
case ISCSI_BOOT_TGT_CHAP_TYPE:
rc = S_IRUGO;
+ break;
case ISCSI_BOOT_TGT_NAME:
if (tgt->tgt_name_len)
rc = S_IRUGO;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c27d82f52f75fc9d8d9d40d120d2a96fdeeada5e ]
When superblock has lots of inodes without any pagecache (like is the
case for /proc), drop_pagecache_sb() will iterate through all of them
without dropping sb->s_inode_list_lock which can lead to softlockups
(one of our customers hit this).
Fix the problem by going to the slow path and doing cond_resched() in
case the process needs rescheduling.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jan Kara <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/drop_caches.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index d72d52b90433..280460fef066 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -20,8 +20,13 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
spin_lock(&sb->s_inode_list_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
spin_lock(&inode->i_lock);
+ /*
+ * We must skip inodes in unusual state. We may also skip
+ * inodes without pages but we deliberately won't in case
+ * we need to reschedule to avoid softlockups.
+ */
if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
- (inode->i_mapping->nrpages == 0)) {
+ (inode->i_mapping->nrpages == 0 && !need_resched())) {
spin_unlock(&inode->i_lock);
continue;
}
@@ -29,6 +34,7 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
spin_unlock(&inode->i_lock);
spin_unlock(&sb->s_inode_list_lock);
+ cond_resched();
invalidate_mapping_pages(inode->i_mapping, 0, -1);
iput(toput_inode);
toput_inode = inode;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Turnbull <[email protected]>
commit 017b1b6d28c479f1ad9a7a41f775545a3e1cba35 upstream.
nfacct_filter_alloc doesn't validate the NFACCT_FILTER_MASK and
NFACCT_FILTER_VALUE parameters which can trigger a NULL pointer
dereference. CAP_NET_ADMIN is required to trigger the bug.
Signed-off-by: Phil Turnbull <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nfnetlink_acct.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/netfilter/nfnetlink_acct.c
+++ b/net/netfilter/nfnetlink_acct.c
@@ -243,6 +243,9 @@ nfacct_filter_alloc(const struct nlattr
if (err < 0)
return ERR_PTR(err);
+ if (!tb[NFACCT_FILTER_MASK] || !tb[NFACCT_FILTER_VALUE])
+ return ERR_PTR(-EINVAL);
+
filter = kzalloc(sizeof(struct nfacct_filter), GFP_KERNEL);
if (!filter)
return ERR_PTR(-ENOMEM);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Brivio <[email protected]>
[ Upstream commit ad6c9986bcb627c7c22b8f9e9a934becc27df87c ]
If we receive a packet while deleting a VXLAN device, there's a chance
vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine,
except that vxlan_dellink() should never ever touch stuff that's still in
use, such as the GRO cells list.
Otherwise, vxlan_rcv() crashes while queueing packets via
gro_cells_receive().
Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU
grace period is elapsed and nothing needs the gro_cells anymore.
This is now done in the same way as commit 8e816df87997 ("geneve: Use GRO
cells infrastructure.") originally implemented for GENEVE.
Reported-by: Jianlin Shi <[email protected]>
Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")
Signed-off-by: Stefano Brivio <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2322,6 +2322,8 @@ static void vxlan_uninit(struct net_devi
{
struct vxlan_dev *vxlan = netdev_priv(dev);
+ gro_cells_destroy(&vxlan->gro_cells);
+
vxlan_fdb_delete_default(vxlan);
free_percpu(dev->tstats);
@@ -3066,7 +3068,6 @@ static void vxlan_dellink(struct net_dev
{
struct vxlan_dev *vxlan = netdev_priv(dev);
- gro_cells_destroy(&vxlan->gro_cells);
list_del(&vxlan->next);
unregister_netdevice_queue(dev, head);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 1e027960edfaa6a43f9ca31081729b716598112b ]
syzbot found another add_timer() issue, this time in net/hsr [1]
Let's use mod_timer() which is safe.
[1]
kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
kobject: 'loop2' (00000000f5629718): kobject_uevent_env
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134
Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9
RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246
kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2'
RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000
RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8
RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30
FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
hsr_check_announce net/hsr/hsr_device.c:99 [inline]
hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120
hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
dev_open net/core/dev.c:1436 [inline]
dev_open+0x143/0x160 net/core/dev.c:1424
team_port_add drivers/net/team/team.c:1203 [inline]
team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933
do_set_master net/core/rtnetlink.c:2358 [inline]
do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332
do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493
rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747
rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xdd/0x130 net/socket.c:632
sock_write_iter+0x27c/0x3e0 net/socket.c:923
call_write_iter include/linux/fs.h:1869 [inline]
do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680
do_iter_write fs/read_write.c:956 [inline]
do_iter_write+0x184/0x610 fs/read_write.c:937
vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001
do_writev+0xf6/0x290 fs/read_write.c:1036
__do_sys_writev fs/read_write.c:1109 [inline]
__se_sys_writev fs/read_write.c:1106 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1106
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4
R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Arvid Brodin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_device.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -93,9 +93,8 @@ static void hsr_check_announce(struct ne
if ((hsr_dev->operstate == IF_OPER_UP) && (old_operstate != IF_OPER_UP)) {
/* Went up */
hsr->announce_count = 0;
- hsr->announce_timer.expires = jiffies +
- msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL);
- add_timer(&hsr->announce_timer);
+ mod_timer(&hsr->announce_timer,
+ jiffies + msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL));
}
if ((hsr_dev->operstate != IF_OPER_UP) && (old_operstate == IF_OPER_UP))
@@ -323,6 +322,7 @@ static void hsr_announce(unsigned long d
{
struct hsr_priv *hsr;
struct hsr_port *master;
+ unsigned long interval;
hsr = (struct hsr_priv *) data;
@@ -337,14 +337,12 @@ static void hsr_announce(unsigned long d
}
if (hsr->announce_count < 3)
- hsr->announce_timer.expires = jiffies +
- msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL);
+ interval = msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL);
else
- hsr->announce_timer.expires = jiffies +
- msecs_to_jiffies(HSR_LIFE_CHECK_INTERVAL);
+ interval = msecs_to_jiffies(HSR_LIFE_CHECK_INTERVAL);
if (is_admin_up(master->dev))
- add_timer(&hsr->announce_timer);
+ mod_timer(&hsr->announce_timer, jiffies + interval);
rcu_read_unlock();
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit da8ab57863ed7e912d10b179b6bdc652f635bd19 upstream.
Back in linux-4.4, I inadvertently put a call to reqsk_put() in
inet_child_forget(), forgetting it could be called from two different
points.
In the case it is called from inet_csk_reqsk_queue_add(), we want to
keep the reference on the request socket, since it is released later by
the caller (tcp_v{4|6}_rcv())
This bug never showed up because atomic_dec_and_test() was not signaling
the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets
prevented the request to be put in quarantine.
Recent conversion of socket refcount from atomic_t to refcount_t finally
exposed the bug.
So move the reqsk_put() to inet_csk_listen_stop() to fix this.
Thanks to Shankara Pailoor for using syzkaller and providing
a nice set of .config and C repro.
WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186
refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186
Kernel panic - not syncing: panic_on_warn set ...
CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0xf7/0x1aa lib/dump_stack.c:52
panic+0x1ae/0x3a7 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846
RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186
RSP: 0018:ffff88006e006b60 EFLAGS: 00010286
RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60
RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d
R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340
refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
reqsk_put+0x71/0x2b0 include/net/request_sock.h:123
tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:477 [inline]
ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488
__netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336
process_backlog+0x1c5/0x6d0 net/core/dev.c:5102
napi_poll net/core/dev.c:5499 [inline]
net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565
__do_softirq+0x2cb/0xb2d kernel/softirq.c:284
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898
</IRQ>
do_softirq.part.16+0x63/0x80 kernel/softirq.c:328
do_softirq kernel/softirq.c:176 [inline]
__local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181
local_bh_enable include/linux/bottom_half.h:31 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline]
ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231
ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:237 [inline]
ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:471 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504
tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123
tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575
tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545
tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline]
tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930
tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483
sk_backlog_rcv include/net/sock.h:907 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2223
release_sock+0xa4/0x2a0 net/core/sock.c:2715
inet_wait_for_connect net/ipv4/af_inet.c:557 [inline]
__inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643
inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682
SYSC_connect+0x204/0x470 net/socket.c:1628
SyS_connect+0x24/0x30 net/socket.c:1609
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x451e59
RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59
RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007
RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000
R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000
Fixes: ebb516af60e1 ("tcp/dccp: fix race at listener dismantle phase")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Shankara Pailoor <[email protected]>
Tested-by: Shankara Pailoor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Guillaume Nault <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/inet_connection_sock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -787,7 +787,6 @@ static void inet_child_forget(struct soc
tcp_sk(child)->fastopen_rsk = NULL;
}
inet_csk_destroy_sock(child);
- reqsk_put(req);
}
struct sock *inet_csk_reqsk_queue_add(struct sock *sk,
@@ -858,6 +857,7 @@ void inet_csk_listen_stop(struct sock *s
sock_hold(child);
inet_child_forget(sk, req, child);
+ reqsk_put(req);
bh_unlock_sock(child);
local_bh_enable();
sock_put(child);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil <[email protected]>
commit 5e99456c20f712dcc13d9f6ca4278937d5367355 upstream.
Userspace shouldn't set bytesused to 0 for output buffers.
vb2_warn_zero_bytesused() warns about this (only once!), but it also
calls WARN_ON(1), which is confusing since it is not immediately clear
that it warns about a 0 value for bytesused.
Just drop the WARN_ON as it serves no purpose.
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Cc: Matthias Maennich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/videobuf2-v4l2.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/media/v4l2-core/videobuf2-v4l2.c
+++ b/drivers/media/v4l2-core/videobuf2-v4l2.c
@@ -141,7 +141,6 @@ static void vb2_warn_zero_bytesused(stru
return;
check_once = true;
- WARN_ON(1);
pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n");
if (vb->vb2_queue->allow_zero_bytesused)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiao Ni <[email protected]>
commit b761dcf1217760a42f7897c31dcb649f59b2333e upstream.
In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.
Cc: [email protected] # v3.16+
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid10.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4442,7 +4442,6 @@ bio_full:
atomic_inc(&r10_bio->remaining);
read_bio->bi_next = NULL;
generic_make_request(read_bio);
- sector_nr += nr_sectors;
sectors_done += nr_sectors;
if (sector_nr <= last)
goto read_more;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 163d1c3d6f17556ed3c340d3789ea93be95d6c28 ]
Back in 2013 Hannes took care of most of such leaks in commit
bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
But the bug in l2tp_ip6_recvmsg() has not been fixed.
syzbot report :
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:174 [inline]
move_addr_to_user+0x311/0x570 net/socket.c:227
___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
__sys_recvmmsg net/socket.c:2469 [inline]
__do_sys_recvmmsg net/socket.c:2492 [inline]
__se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
__x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819
RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c
R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_ip6.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -666,9 +666,6 @@ static int l2tp_ip6_recvmsg(struct sock
if (flags & MSG_OOB)
goto out;
- if (addr_len)
- *addr_len = sizeof(*lsa);
-
if (flags & MSG_ERRQUEUE)
return ipv6_recv_error(sk, msg, len, addr_len);
@@ -698,6 +695,7 @@ static int l2tp_ip6_recvmsg(struct sock
lsa->l2tp_conn_id = 0;
if (ipv6_addr_type(&lsa->l2tp_addr) & IPV6_ADDR_LINKLOCAL)
lsa->l2tp_scope_id = inet6_iif(skb);
+ *addr_len = sizeof(*lsa);
}
if (np->rxopt.all)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhengbin <[email protected]>
commit bb06c388fa20ae24cfe80c52488de718a7e3a53f upstream.
If msize is less than 4096, we should close and put trans, destroy
tagpool, not just free client. This patch fixes that.
Link: http://lkml.kernel.org/m/[email protected]
Cc: [email protected]
Fixes: 574d356b7a02 ("9p/net: put a lower bound on msize")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: zhengbin <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1058,7 +1058,7 @@ struct p9_client *p9_client_create(const
p9_debug(P9_DEBUG_ERROR,
"Please specify a msize of at least 4k\n");
err = -EINVAL;
- goto free_client;
+ goto close_trans;
}
err = p9_client_version(clnt);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 30c7be26fd3587abcb69587f781098e3ca2d565b upstream.
In commits 93821778def10 ("udp: Fix rcv socket locking") and
f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into
__udpv6_queue_rcv_skb") UDP backlog handlers were renamed, but UDPlite
was forgotten.
This leads to crashes if UDPlite header is pulled twice, which happens
starting from commit e6afc8ace6dd ("udp: remove headers from UDP packets
before queueing")
Bug found by syzkaller team, thanks a lot guys !
Note that backlog use in UDP/UDPlite is scheduled to be removed starting
from linux-4.10, so this patch is only needed up to linux-4.9
Fixes: 93821778def1 ("udp: Fix rcv socket locking")
Fixes: f7ad74fef3af ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into __udpv6_queue_rcv_skb")
Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Andrey Konovalov <[email protected]>
Cc: Benjamin LaHaise <[email protected]>
Cc: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/udp.c | 2 +-
net/ipv4/udp_impl.h | 2 +-
net/ipv4/udplite.c | 2 +-
net/ipv6/udp.c | 2 +-
net/ipv6/udp_impl.h | 2 +-
net/ipv6/udplite.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1463,7 +1463,7 @@ static void udp_v4_rehash(struct sock *s
udp_lib_rehash(sk, new_hash);
}
-static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
int rc;
--- a/net/ipv4/udp_impl.h
+++ b/net/ipv4/udp_impl.h
@@ -25,7 +25,7 @@ int udp_recvmsg(struct sock *sk, struct
int flags, int *addr_len);
int udp_sendpage(struct sock *sk, struct page *page, int offset, size_t size,
int flags);
-int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
void udp_destroy_sock(struct sock *sk);
#ifdef CONFIG_PROC_FS
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -50,7 +50,7 @@ struct proto udplite_prot = {
.sendmsg = udp_sendmsg,
.recvmsg = udp_recvmsg,
.sendpage = udp_sendpage,
- .backlog_rcv = udp_queue_rcv_skb,
+ .backlog_rcv = __udp_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v4_get_port,
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -585,7 +585,7 @@ out:
sock_put(sk);
}
-static int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
int rc;
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -26,7 +26,7 @@ int compat_udpv6_getsockopt(struct sock
int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len);
int udpv6_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int noblock,
int flags, int *addr_len);
-int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
void udpv6_destroy_sock(struct sock *sk);
void udp_v6_clear_sk(struct sock *sk, int size);
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -45,7 +45,7 @@ struct proto udplitev6_prot = {
.getsockopt = udpv6_getsockopt,
.sendmsg = udpv6_sendmsg,
.recvmsg = udpv6_recvmsg,
- .backlog_rcv = udpv6_queue_rcv_skb,
+ .backlog_rcv = __udpv6_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v6_get_port,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ken-ichirou MATSUZAWA <[email protected]>
commit eb075954e9fde114f57adc39a9ea6d379c13f81e upstream.
This patch stops processing options for unknown command.
Signed-off-by: Ken-ichirou MATSUZAWA <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nfnetlink_log.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -895,7 +895,7 @@ nfulnl_recv_config(struct sock *ctnl, st
goto out_put;
default:
ret = -ENOTSUPP;
- break;
+ goto out_put;
}
} else if (!inst) {
ret = -ENODEV;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
[ Upstream commit ae3b564179bfd06f32d051b9e5d72ce4b2a07c37 ]
Several u->addr and u->path users are not holding any locks in
common with unix_bind(). unix_state_lock() is useless for those
purposes.
u->addr is assign-once and *(u->addr) is fully set up by the time
we set u->addr (all under unix_table_lock). u->path is also
set in the same critical area, also before setting u->addr, and
any unix_sock with ->path filled will have non-NULL ->addr.
So setting ->addr with smp_store_release() is all we need for those
"lockless" users - just have them fetch ->addr with smp_load_acquire()
and don't even bother looking at ->path if they see NULL ->addr.
Users of ->addr and ->path fall into several classes now:
1) ones that do smp_load_acquire(u->addr) and access *(u->addr)
and u->path only if smp_load_acquire() has returned non-NULL.
2) places holding unix_table_lock. These are guaranteed that
*(u->addr) is seen fully initialized. If unix_sock is in one of the
"bound" chains, so's ->path.
3) unix_sock_destructor() using ->addr is safe. All places
that set u->addr are guaranteed to have seen all stores *(u->addr)
while holding a reference to u and unix_sock_destructor() is called
when (atomic) refcount hits zero.
4) unix_release_sock() using ->path is safe. unix_bind()
is serialized wrt unix_release() (normally - by struct file
refcount), and for the instances that had ->path set by unix_bind()
unix_release_sock() comes from unix_release(), so they are fine.
Instances that had it set in unix_stream_connect() either end up
attached to a socket (in unix_accept()), in which case the call
chain to unix_release_sock() and serialization are the same as in
the previous case, or they never get accept'ed and unix_release_sock()
is called when the listener is shut down and its queue gets purged.
In that case the listener's queue lock provides the barriers needed -
unix_stream_connect() shoves our unix_sock into listener's queue
under that lock right after having set ->path and eventual
unix_release_sock() caller picks them from that queue under the
same lock right before calling unix_release_sock().
5) unix_find_other() use of ->path is pointless, but safe -
it happens with successful lookup by (abstract) name, so ->path.dentry
is guaranteed to be NULL there.
earlier-variant-reviewed-by: "Paul E. McKenney" <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/af_unix.c | 48 +++++++++++++++++++++++++++++-------------------
net/unix/diag.c | 3 ++-
security/lsm_audit.c | 10 ++++++----
3 files changed, 37 insertions(+), 24 deletions(-)
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -890,7 +890,7 @@ retry:
addr->hash ^= sk->sk_type;
__unix_remove_socket(sk);
- u->addr = addr;
+ smp_store_release(&u->addr, addr);
__unix_insert_socket(&unix_socket_table[addr->hash], sk);
spin_unlock(&unix_table_lock);
err = 0;
@@ -1060,7 +1060,7 @@ static int unix_bind(struct socket *sock
err = 0;
__unix_remove_socket(sk);
- u->addr = addr;
+ smp_store_release(&u->addr, addr);
__unix_insert_socket(list, sk);
out_unlock:
@@ -1331,15 +1331,29 @@ restart:
RCU_INIT_POINTER(newsk->sk_wq, &newu->peer_wq);
otheru = unix_sk(other);
- /* copy address information from listening to new sock*/
- if (otheru->addr) {
- atomic_inc(&otheru->addr->refcnt);
- newu->addr = otheru->addr;
- }
+ /* copy address information from listening to new sock
+ *
+ * The contents of *(otheru->addr) and otheru->path
+ * are seen fully set up here, since we have found
+ * otheru in hash under unix_table_lock. Insertion
+ * into the hash chain we'd found it in had been done
+ * in an earlier critical area protected by unix_table_lock,
+ * the same one where we'd set *(otheru->addr) contents,
+ * as well as otheru->path and otheru->addr itself.
+ *
+ * Using smp_store_release() here to set newu->addr
+ * is enough to make those stores, as well as stores
+ * to newu->path visible to anyone who gets newu->addr
+ * by smp_load_acquire(). IOW, the same warranties
+ * as for unix_sock instances bound in unix_bind() or
+ * in unix_autobind().
+ */
if (otheru->path.dentry) {
path_get(&otheru->path);
newu->path = otheru->path;
}
+ atomic_inc(&otheru->addr->refcnt);
+ smp_store_release(&newu->addr, otheru->addr);
/* Set credentials */
copy_peercred(sk, other);
@@ -1452,7 +1466,7 @@ out:
static int unix_getname(struct socket *sock, struct sockaddr *uaddr, int *uaddr_len, int peer)
{
struct sock *sk = sock->sk;
- struct unix_sock *u;
+ struct unix_address *addr;
DECLARE_SOCKADDR(struct sockaddr_un *, sunaddr, uaddr);
int err = 0;
@@ -1467,19 +1481,15 @@ static int unix_getname(struct socket *s
sock_hold(sk);
}
- u = unix_sk(sk);
- unix_state_lock(sk);
- if (!u->addr) {
+ addr = smp_load_acquire(&unix_sk(sk)->addr);
+ if (!addr) {
sunaddr->sun_family = AF_UNIX;
sunaddr->sun_path[0] = 0;
*uaddr_len = sizeof(short);
} else {
- struct unix_address *addr = u->addr;
-
*uaddr_len = addr->len;
memcpy(sunaddr, addr->name, *uaddr_len);
}
- unix_state_unlock(sk);
sock_put(sk);
out:
return err;
@@ -2093,11 +2103,11 @@ static int unix_seqpacket_recvmsg(struct
static void unix_copy_addr(struct msghdr *msg, struct sock *sk)
{
- struct unix_sock *u = unix_sk(sk);
+ struct unix_address *addr = smp_load_acquire(&unix_sk(sk)->addr);
- if (u->addr) {
- msg->msg_namelen = u->addr->len;
- memcpy(msg->msg_name, u->addr->name, u->addr->len);
+ if (addr) {
+ msg->msg_namelen = addr->len;
+ memcpy(msg->msg_name, addr->name, addr->len);
}
}
@@ -2820,7 +2830,7 @@ static int unix_seq_show(struct seq_file
(s->sk_state == TCP_ESTABLISHED ? SS_CONNECTING : SS_DISCONNECTING),
sock_i_ino(s));
- if (u->addr) {
+ if (u->addr) { // under unix_table_lock here
int i, len;
seq_putc(seq, ' ');
--- a/net/unix/diag.c
+++ b/net/unix/diag.c
@@ -10,7 +10,8 @@
static int sk_diag_dump_name(struct sock *sk, struct sk_buff *nlskb)
{
- struct unix_address *addr = unix_sk(sk)->addr;
+ /* might or might not have unix_table_lock */
+ struct unix_address *addr = smp_load_acquire(&unix_sk(sk)->addr);
if (!addr)
return 0;
--- a/security/lsm_audit.c
+++ b/security/lsm_audit.c
@@ -308,6 +308,7 @@ static void dump_common_audit_data(struc
if (a->u.net->sk) {
struct sock *sk = a->u.net->sk;
struct unix_sock *u;
+ struct unix_address *addr;
int len = 0;
char *p = NULL;
@@ -338,14 +339,15 @@ static void dump_common_audit_data(struc
#endif
case AF_UNIX:
u = unix_sk(sk);
+ addr = smp_load_acquire(&u->addr);
+ if (!addr)
+ break;
if (u->path.dentry) {
audit_log_d_path(ab, " path=", &u->path);
break;
}
- if (!u->addr)
- break;
- len = u->addr->len-sizeof(short);
- p = &u->addr->name->sun_path[0];
+ len = addr->len-sizeof(short);
+ p = &addr->name->sun_path[0];
audit_log_format(ab, " path=");
if (*p)
audit_log_untrustedstring(ab, p);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guillaume Nault <[email protected]>
[ Upstream commit 9d3e1368bb45893a75a5dfb7cd21fdebfa6b47af ]
Commit 7716682cc58e ("tcp/dccp: fix another race at listener
dismantle") let inet_csk_reqsk_queue_add() fail, and adjusted
{tcp,dccp}_check_req() accordingly. However, TFO and syncookies
weren't modified, thus leaking allocated resources on error.
Contrary to tcp_check_req(), in both syncookies and TFO cases,
we need to drop the request socket. Also, since the child socket is
created with inet_csk_clone_lock(), we have to unlock it and drop an
extra reference (->sk_refcount is initially set to 2 and
inet_csk_reqsk_queue_add() drops only one ref).
For TFO, we also need to revert the work done by tcp_try_fastopen()
(with reqsk_fastopen_remove()).
Fixes: 7716682cc58e ("tcp/dccp: fix another race at listener dismantle")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/syncookies.c | 7 ++++++-
net/ipv4/tcp_input.c | 8 +++++++-
2 files changed, 13 insertions(+), 2 deletions(-)
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -228,7 +228,12 @@ struct sock *tcp_get_cookie_sock(struct
if (child) {
atomic_set(&req->rsk_refcnt, 1);
sock_rps_save_rxhash(child, skb);
- inet_csk_reqsk_queue_add(sk, req, child);
+ if (!inet_csk_reqsk_queue_add(sk, req, child)) {
+ bh_unlock_sock(child);
+ sock_put(child);
+ child = NULL;
+ reqsk_put(req);
+ }
} else {
reqsk_free(req);
}
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -6409,7 +6409,13 @@ int tcp_conn_request(struct request_sock
af_ops->send_synack(fastopen_sk, dst, &fl, req,
&foc, false);
/* Add the child socket directly into the accept queue */
- inet_csk_reqsk_queue_add(sk, req, fastopen_sk);
+ if (!inet_csk_reqsk_queue_add(sk, req, fastopen_sk)) {
+ reqsk_fastopen_remove(fastopen_sk, req, false);
+ bh_unlock_sock(fastopen_sk);
+ sock_put(fastopen_sk);
+ reqsk_put(req);
+ goto drop;
+ }
sk->sk_data_ready(sk);
bh_unlock_sock(fastopen_sk);
sock_put(fastopen_sk);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhi Jin <[email protected]>
commit a1d75dad3a2c689e70a1c4e0214cca9de741d0aa upstream.
There is a bug in the channel allocation logic that leads to an endless
loop when looking for a contiguous range of channels in a range with a
mixture of free and occupied channels. For example, opening three
consequtive channels, closing the first two and requesting 4 channels in
a row will trigger this soft lockup. The bug is that the search loop
forgets to skip over the range once it detects that one channel in that
range is occupied.
Restore the original intent to the logic by fixing the omission.
Signed-off-by: Zhi Jin <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/stm/core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -229,6 +229,9 @@ static int find_free_channels(unsigned l
;
if (i == width)
return pos;
+
+ /* step over [pos..pos+i) to continue search */
+ pos += i;
}
return -1;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kalash Nainwal <[email protected]>
[ Upstream commit 97f0082a0592212fc15d4680f5a4d80f79a1687c ]
Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
keep legacy software happy. This is similar to what was done for
ipv4 in commit 709772e6e065 ("net: Fix routing tables with
id > 255 for legacy software").
Signed-off-by: Kalash Nainwal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -3095,7 +3095,7 @@ static int rt6_fill_node(struct net *net
table = rt->rt6i_table->tb6_id;
else
table = RT6_TABLE_UNSPEC;
- rtm->rtm_table = table;
+ rtm->rtm_table = table < 256 ? table : RT_TABLE_COMPAT;
if (nla_put_u32(skb, RTA_TABLE, table))
goto nla_put_failure;
if (rt->rt6i_flags & RTF_REJECT) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 2a5ff07a0eb945f291e361aa6f6becca8340ba46 ]
We keep receiving syzbot reports [1] that show that tunnels do not play
the rcu/IFF_UP rules properly.
At device dismantle phase, gro_cells_destroy() will be called
only after a full rcu grace period is observed after IFF_UP
has been cleared.
This means that IFF_UP needs to be tested before queueing packets
into netif_rx() or gro_cells.
This patch implements the test in gro_cells_receive() because
too many callers do not seem to bother enough.
[1]
BUG: unable to handle kernel paging request at fffff4ca0b9ffffe
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env
FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Call Trace:
kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2'
ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010
netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116
ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124
vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495
ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156
cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551
process_one_work+0x98e/0x1790 kernel/workqueue.c:2173
worker_thread+0x98/0xe40 kernel/workqueue.c:2319
kthread+0x357/0x430 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
CR2: fffff4ca0b9ffffe
[ end trace 513fc9c1338d1cb3 ]
RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline]
RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline]
RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline]
RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline]
RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78
Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03
RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02
RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe
RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0
RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645
R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000
kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env
R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75
FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0
Fixes: c9e6bc644e55 ("net: add gro_cells infrastructure")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/gro_cells.h | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/include/net/gro_cells.h
+++ b/include/net/gro_cells.h
@@ -19,22 +19,30 @@ static inline void gro_cells_receive(str
struct gro_cell *cell;
struct net_device *dev = skb->dev;
+ rcu_read_lock();
+ if (unlikely(!(dev->flags & IFF_UP)))
+ goto drop;
+
if (!gcells->cells || skb_cloned(skb) || !(dev->features & NETIF_F_GRO)) {
netif_rx(skb);
- return;
+ goto unlock;
}
cell = this_cpu_ptr(gcells->cells);
if (skb_queue_len(&cell->napi_skbs) > netdev_max_backlog) {
+drop:
atomic_long_inc(&dev->rx_dropped);
kfree_skb(skb);
- return;
+ goto unlock;
}
__skb_queue_tail(&cell->napi_skbs, skb);
if (skb_queue_len(&cell->napi_skbs) == 1)
napi_schedule(&cell->napi);
+
+unlock:
+ rcu_read_unlock();
}
/* called under BH context */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a40061ea2e39494104602b3048751341bda374a1 ]
SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.
Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 143b9a384af8..53b3c1a5851c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -126,6 +126,10 @@ static int bcm_sysport_set_rx_csum(struct net_device *dev,
priv->rx_chk_en = !!(wanted & NETIF_F_RXCSUM);
reg = rxchk_readl(priv, RXCHK_CONTROL);
+ /* Clear L2 header checks, which would prevent BPDUs
+ * from being received.
+ */
+ reg &= ~RXCHK_L2_HDR_DIS;
if (priv->rx_chk_en)
reg |= RXCHK_EN;
else
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ]
When a target sends Check Condition, whilst initiator is busy xmiting
re-queued data, could lead to race between iscsi_complete_task() and
iscsi_xmit_task() and eventually crashing with the following kernel
backtrace.
[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246
[3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480
[3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20
[3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008
[3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000
[3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08
[3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870
[3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0
[3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP <ffff8801f545bdb0>
[3326150.988144] WARN: CR2: 0000000000000078
[3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]---
Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix
list corruption regression") introduced "taskqueuelock" to fix list
corruption during the race, but this wasn't enough.
Re-setting of conn->task to NULL, could race with iscsi_xmit_task().
iscsi_complete_task()
{
....
if (conn->task == task)
conn->task = NULL;
}
conn->task in iscsi_xmit_task() could be NULL and so will be task.
__iscsi_get_task(task) will crash (NullPtr de-ref), trying to access
refcount.
iscsi_xmit_task()
{
struct iscsi_task *task = conn->task;
__iscsi_get_task(task);
}
This commit will take extra conn->session->back_lock in iscsi_xmit_task()
to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if
iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race,
iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().
Signed-off-by: Anoob Soman <[email protected]>
Signed-off-by: Bob Liu <[email protected]>
Acked-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libiscsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 009a2ef829d6..0fdc8c417035 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1448,7 +1448,13 @@ static int iscsi_xmit_task(struct iscsi_conn *conn)
if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx))
return -ENODATA;
+ spin_lock_bh(&conn->session->back_lock);
+ if (conn->task == NULL) {
+ spin_unlock_bh(&conn->session->back_lock);
+ return -ENODATA;
+ }
__iscsi_get_task(task);
+ spin_unlock_bh(&conn->session->back_lock);
spin_unlock_bh(&conn->session->frwd_lock);
rc = conn->session->tt->xmit_task(task);
spin_lock_bh(&conn->session->frwd_lock);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 0c51b1dde494..df295a0ce87d 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -762,8 +762,8 @@ static struct ipu_devtype ipu_type_imx53 = {
.cpmem_ofs = 0x07000000,
.srm_ofs = 0x07040000,
.tpm_ofs = 0x07060000,
- .csi0_ofs = 0x07030000,
- .csi1_ofs = 0x07038000,
+ .csi0_ofs = 0x06030000,
+ .csi1_ofs = 0x06038000,
.ic_ofs = 0x06020000,
.disp0_ofs = 0x06040000,
.disp1_ofs = 0x06048000,
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pankaj Gupta <[email protected]>
commit 42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream.
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes: f2147b88b2b1 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <[email protected]> # 4.2+
Signed-off-by: Pankaj Gupta <[email protected]>
Signed-off-by: Arun Pathak <[email protected]>
Reviewed-by: Horia Geanta <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/caamalg.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -2081,6 +2081,7 @@ static void init_aead_job(struct aead_re
if (unlikely(req->src != req->dst)) {
if (!edesc->dst_nents) {
dst_dma = sg_dma_address(req->dst);
+ out_options = 0;
} else {
dst_dma = edesc->sec4_sg_dma +
sec4_sg_index *
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ]
Dan Carpenter reported the following:
The patch 52898025cf7d: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:
drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
error: using offset into zero size array 'psf_data[]'
drivers/s390/block/dasd_eckd.c
4458 /* Copy parms from caller */
4459 rc = -EFAULT;
4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
^^^^^^^
The user can specify any "usrparm.psf_data_len". They choose zero by
mistake.
4461 goto out;
4462 if (is_compat_task()) {
4463 /* Make sure pointers are sane even on 31 bit. */
4464 rc = -EINVAL;
4465 if ((usrparm.psf_data >> 32) != 0)
4466 goto out;
4467 if ((usrparm.rssd_result >> 32) != 0)
4468 goto out;
4469 usrparm.psf_data &= 0x7fffffffULL;
4470 usrparm.rssd_result &= 0x7fffffffULL;
4471 }
4472 /* alloc I/O data area */
4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
| GFP_DMA);
4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
| GFP_DMA);
4475 if (!psf_data || !rssd_result) {
kzalloc() returns a ZERO_SIZE_PTR (0x16).
4476 rc = -ENOMEM;
4477 goto out_free;
4478 }
4479
4480 /* get syscall header from user space */
4481 rc = -EFAULT;
4482 if (copy_from_user(psf_data,
4483 (void __user *)(unsigned long)
usrparm.psf_data,
4484 usrparm.psf_data_len))
That all works great.
4485 goto out_free;
4486 psf0 = psf_data[0];
4487 psf1 = psf_data[1];
But now we're assuming that "->psf_data_len" was at least 2 bytes.
Fix this by checking the user specified length psf_data_len.
Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Stefan Haberland <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/block/dasd_eckd.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index dac2f6883e28..80a43074c2f9 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -4023,6 +4023,14 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
usrparm.psf_data &= 0x7fffffffULL;
usrparm.rssd_result &= 0x7fffffffULL;
}
+ /* at least 2 bytes are accessed and should be allocated */
+ if (usrparm.psf_data_len < 2) {
+ DBF_DEV_EVENT(DBF_WARNING, device,
+ "Symmetrix ioctl invalid data length %d",
+ usrparm.psf_data_len);
+ rc = -EINVAL;
+ goto out;
+ }
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 5030cba4a581..0c51b1dde494 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -746,8 +746,8 @@ static struct ipu_devtype ipu_type_imx51 = {
.cpmem_ofs = 0x1f000000,
.srm_ofs = 0x1f040000,
.tpm_ofs = 0x1f060000,
- .csi0_ofs = 0x1f030000,
- .csi1_ofs = 0x1f038000,
+ .csi0_ofs = 0x1e030000,
+ .csi1_ofs = 0x1e038000,
.ic_ofs = 0x1e020000,
.disp0_ofs = 0x1e040000,
.disp1_ofs = 0x1e048000,
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dc30e70391376ba3987aeb856ae6d9c0706534f1 ]
In function omap4_dsi_mux_pads(), local variable "reg" could
be uninitialized if function regmap_read() returns -EINVAL.
However, it will be used directly in the later context, which
is potentially unsafe.
Signed-off-by: Yizhuo <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/display.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6ab13d18c636..cde86d1199cf 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -115,6 +115,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
u32 reg;
+ int ret;
if (dsi_id == 0) {
enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
@@ -130,7 +131,11 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
return -ENODEV;
}
- regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®);
+ ret = regmap_read(omap4_dsi_mux_syscon,
+ OMAP4_DSIPHY_SYSCON_OFFSET,
+ ®);
+ if (ret)
+ return ret;
reg &= ~enable_mask;
reg &= ~pipd_mask;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d358def706880defa4c9e87381c5bf086a97d5f9 ]
In case the hold bit is not needed we are carrying the old values.
Fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments
Zynq-based devices.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Reported-by: Kyle Roeschley <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Shubhrajyoti Datta <[email protected]>
Tested-by: Kyle Roeschley <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-cadence.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 84deed6571bd..6d32e6da3110 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -378,8 +378,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -436,8 +438,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
+
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 797a22bd5298c2674d927893f46cadf619dad11d ]
syzbot was able to trigger another soft lockup [1]
I first thought it was the O(N^2) issue I mentioned in my
prior fix (f657d22ee1f "net/x25: do not hold the cpu
too long in x25_new_lci()"), but I eventually found
that x25_bind() was not checking SOCK_ZAPPED state under
socket lock protection.
This means that multiple threads can end up calling
x25_insert_socket() for the same socket, and corrupt x25_list
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492]
Modules linked in:
irq event stamp: 27515
hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336
softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341
CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97
Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2
RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000
RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628
RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561
R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628
R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__x25_find_socket net/x25/af_x25.c:327 [inline]
x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342
x25_new_lci net/x25/af_x25.c:355 [inline]
x25_connect+0x380/0xde0 net/x25/af_x25.c:784
__sys_connect+0x266/0x330 net/socket.c:1662
__do_sys_connect net/socket.c:1673 [inline]
__se_sys_connect net/socket.c:1670 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1670
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29
RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005
RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4
R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86
Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00
RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206
RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00
RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561
R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff
R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003
FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
__raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
_raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
x25_bind+0x273/0x340 net/x25/af_x25.c:703
__sys_bind+0x23f/0x290 net/socket.c:1481
__do_sys_bind net/socket.c:1492 [inline]
__se_sys_bind net/socket.c:1490 [inline]
__x64_sys_bind+0x73/0xb0 net/socket.c:1490
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Fixes: 90c27297a9bf ("X.25 remove bkl in bind")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: andrew hendry <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/x25/af_x25.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -678,8 +678,7 @@ static int x25_bind(struct socket *sock,
struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
int len, i, rc = 0;
- if (!sock_flag(sk, SOCK_ZAPPED) ||
- addr_len != sizeof(struct sockaddr_x25) ||
+ if (addr_len != sizeof(struct sockaddr_x25) ||
addr->sx25_family != AF_X25) {
rc = -EINVAL;
goto out;
@@ -694,9 +693,13 @@ static int x25_bind(struct socket *sock,
}
lock_sock(sk);
- x25_sk(sk)->source_addr = addr->sx25_addr;
- x25_insert_socket(sk);
- sock_reset_flag(sk, SOCK_ZAPPED);
+ if (sock_flag(sk, SOCK_ZAPPED)) {
+ x25_sk(sk)->source_addr = addr->sx25_addr;
+ x25_insert_socket(sk);
+ sock_reset_flag(sk, SOCK_ZAPPED);
+ } else {
+ rc = -EINVAL;
+ }
release_sock(sk);
SOCK_DEBUG(sk, "x25_bind: socket is bound\n");
out:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
[ Upstream commit 8511a653e9250ef36b95803c375a7be0e2edb628 ]
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper)
ultimately depends on function roundup_pow_of_two.
If the amount of memory required by the QP is less than one page,
roundup_pow_of_two is called with argument zero. In this case, the
roundup_pow_of_two result is undefined.
Calling roundup_pow_of_two with a zero argument resulted in the
following stack trace:
UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1
Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015
Call Trace:
dump_stack+0x9a/0xeb
ubsan_epilogue+0x9/0x7c
__ubsan_handle_shift_out_of_bounds+0x254/0x29d
? __ubsan_handle_load_invalid_value+0x180/0x180
? debug_show_all_locks+0x310/0x310
? sched_clock+0x5/0x10
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x260
? find_held_lock+0x35/0x1e0
? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
Fix this by explicitly testing for zero, and returning one if the
argument is zero (assuming that the next higher power of 2 in this case
should be one).
Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -2652,13 +2652,13 @@ static int qp_get_mtt_size(struct mlx4_q
int total_pages;
int total_mem;
int page_offset = (be32_to_cpu(qpc->params2) >> 6) & 0x3f;
+ int tot;
sq_size = 1 << (log_sq_size + log_sq_sride + 4);
rq_size = (srq|rss|xrc) ? 0 : (1 << (log_rq_size + log_rq_stride + 4));
total_mem = sq_size + rq_size;
- total_pages =
- roundup_pow_of_two((total_mem + (page_offset << 6)) >>
- page_shift);
+ tot = (total_mem + (page_offset << 6)) >> page_shift;
+ total_pages = !tot ? 1 : roundup_pow_of_two(tot);
return total_pages;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
commit f16eb8a4b096514ac06fb25bf599dcc792899b3d upstream.
If SSDT overlay is loaded via ConfigFS and then unloaded the device,
we would like to have OF modalias for, already gone. Thus, acpi_get_name()
returns no allocated buffer for such case and kernel crashes afterwards:
ACPI: Host-directed Dynamic ACPI Table Unload
ads7950 spi-PRP0001:00: Dropping the link to regulator.0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:create_of_modalias.isra.1+0x4c/0x150
Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04
RSP: 0000:ffffa51040297c10 EFLAGS: 00010246
RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000
RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0
RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000
R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218
R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0
Call Trace:
__acpi_device_uevent_modalias+0xb0/0x100
spi_uevent+0xd/0x40
...
In order to fix above let create_of_modalias() check the status returned
by acpi_get_name() and bail out in case of failure.
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381
Reported-by: Ferry Toth <[email protected]>
Tested-by: Ferry Toth<[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Cc: 4.1+ <[email protected]> # 4.1+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/device_sysfs.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -202,11 +202,15 @@ static int create_of_modalias(struct acp
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
const union acpi_object *of_compatible, *obj;
+ acpi_status status;
int len, count;
int i, nval;
char *c;
- acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ status = acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
/* DT strings are all in lower case */
for (c = buf.pointer; *c != '\0'; c++)
*c = tolower(*c);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit e7f0c424d0806b05d6f47be9f202b037eb701707 upstream.
Commit d716ff71dd12 ("tracing: Remove taking of trace_types_lock in
pipe files") use the current tracer instead of the copy in
tracing_open_pipe(), but it forget to remove the freeing sentence in
the error path.
There's an error path that can call kfree(iter->trace) after the iter->trace
was assigned to tr->current_trace, which would be bad to free.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: d716ff71dd12 ("tracing: Remove taking of trace_types_lock in pipe files")
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 1 -
1 file changed, 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4646,7 +4646,6 @@ out:
return ret;
fail:
- kfree(iter->trace);
kfree(iter);
__trace_array_put(tr);
mutex_unlock(&trace_types_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ]
This patch fixes the following static checker warning:
drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Gabriel Fernandez <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/st-keyscan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
index de7be4f03d91..ebf9f643d910 100644
--- a/drivers/input/keyboard/st-keyscan.c
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -153,6 +153,8 @@ static int keyscan_probe(struct platform_device *pdev)
input_dev->id.bustype = BUS_HOST;
+ keypad_data->input_dev = input_dev;
+
error = keypad_matrix_key_parse_dt(keypad_data);
if (error)
return error;
@@ -168,8 +170,6 @@ static int keyscan_probe(struct platform_device *pdev)
input_set_drvdata(input_dev, keypad_data);
- keypad_data->input_dev = input_dev;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad_data->base))
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
[ Upstream commit 6ff7b060535e87c2ae14dd8548512abfdda528fb ]
KASAN has found use-after-free in fixed_mdio_bus_init,
commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call
put_device on device_register() failure") call put_device()
while device_register() fails,give up the last reference
to the device and allow mdiobus_release to be executed
,kfreeing the bus. However in most drives, mdiobus_free
be called to free the bus while mdiobus_register fails.
use-after-free occurs when access bus again, this patch
revert it to let mdiobus_free free the bus.
KASAN report details as below:
BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524
CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
? 0xffffffffc0e40000
? 0xffffffffc0e40000
? 0xffffffffc0e40000
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
Allocated by task 3524:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 3524:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook mm/slub.c:1436 [inline]
slab_free mm/slub.c:2986 [inline]
kfree+0xe1/0x270 mm/slub.c:3938
device_release+0x78/0x200 drivers/base/core.c:919
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
put_device+0x1c/0x30 drivers/base/core.c:2060
__mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8881dc824c80
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 248 bytes inside of
2048-byte region [ffff8881dc824c80, ffff8881dc825480)
The buggy address belongs to the page:
page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000010200(slab|head)
raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/mdio_bus.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -267,7 +267,6 @@ int __mdiobus_register(struct mii_bus *b
err = device_register(&bus->dev);
if (err) {
pr_err("mii_bus %s failed to register\n", bus->id);
- put_device(&bus->dev);
return -EINVAL;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit a5719a40aef956ba704f2aa1c7b977224d60fa96 upstream.
When a timer tick occurs and the clock is in one-shot mode, the timer
needs to be stopped to prevent it triggering subsequent interrupts.
Currently this code is in exynos4_mct_tick_clear(), but as it is
only needed when an ISR occurs move it into exynos4_mct_tick_isr(),
leaving exynos4_mct_tick_clear() just doing what its name suggests it
should.
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Cc: [email protected] # v4.3+
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/exynos_mct.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -379,6 +379,13 @@ static void exynos4_mct_tick_start(unsig
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
}
+static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+{
+ /* Clear the MCT tick interrupt */
+ if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+}
+
static int exynos4_tick_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -411,8 +418,11 @@ static int set_state_periodic(struct clo
return 0;
}
-static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = &mevt->evt;
+
/*
* This is for supporting oneshot mode.
* Mct would generate interrupt periodically
@@ -421,16 +431,6 @@ static void exynos4_mct_tick_clear(struc
if (!clockevent_state_periodic(&mevt->evt))
exynos4_mct_tick_stop(mevt);
- /* Clear the MCT tick interrupt */
- if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
-}
-
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
-{
- struct mct_clock_event_device *mevt = dev_id;
- struct clock_event_device *evt = &mevt->evt;
-
exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream.
The step values for some of the LDOs appears to be incorrect, resulting
in incorrect voltages (or at least, ones which are different from the
Samsung 3.4 vendor kernel).
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/s2mpa01.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -303,13 +303,13 @@ static const struct regulator_desc regul
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
- regulator_desc_ldo(5, STEP_50_MV),
+ regulator_desc_ldo(5, STEP_25_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
- regulator_desc_ldo(11, STEP_25_MV),
+ regulator_desc_ldo(11, STEP_50_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
@@ -320,11 +320,11 @@ static const struct regulator_desc regul
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
- regulator_desc_ldo(22, STEP_25_MV),
- regulator_desc_ldo(23, STEP_25_MV),
+ regulator_desc_ldo(22, STEP_50_MV),
+ regulator_desc_ldo(23, STEP_50_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
- regulator_desc_ldo(26, STEP_50_MV),
+ regulator_desc_ldo(26, STEP_25_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6321aa197547da397753757bd84c6ce64b3e3d89 ]
clang warns about overflowing the data[] member in the struct pnpipehdr:
net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
if (hdr->data[4] == PEP_IND_READY)
^ ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
u8 data[1];
Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rémi Denis-Courmont <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/phonet/pep.h | 5 +++--
net/phonet/pep.c | 32 ++++++++++++++++----------------
2 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/include/net/phonet/pep.h b/include/net/phonet/pep.h
index b669fe6dbc3b..98f31c7ea23d 100644
--- a/include/net/phonet/pep.h
+++ b/include/net/phonet/pep.h
@@ -63,10 +63,11 @@ struct pnpipehdr {
u8 state_after_reset; /* reset request */
u8 error_code; /* any response */
u8 pep_type; /* status indication */
- u8 data[1];
+ u8 data0; /* anything else */
};
+ u8 data[];
};
-#define other_pep_type data[1]
+#define other_pep_type data[0]
static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
{
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 850a86cde0b3..f6aa532bcbf6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -131,7 +131,7 @@ static int pep_indicate(struct sock *sk, u8 id, u8 code,
ph->utid = 0;
ph->message_id = id;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = code;
+ ph->error_code = code;
return pn_skb_send(sk, skb, NULL);
}
@@ -152,7 +152,7 @@ static int pipe_handler_request(struct sock *sk, u8 id, u8 code,
ph->utid = id; /* whatever */
ph->message_id = id;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = code;
+ ph->error_code = code;
return pn_skb_send(sk, skb, NULL);
}
@@ -207,7 +207,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
struct pnpipehdr *ph;
struct sockaddr_pn dst;
u8 data[4] = {
- oph->data[0], /* PEP type */
+ oph->pep_type, /* PEP type */
code, /* error code, at an unusual offset */
PAD, PAD,
};
@@ -220,7 +220,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
ph->utid = oph->utid;
ph->message_id = PNS_PEP_CTRL_RESP;
ph->pipe_handle = oph->pipe_handle;
- ph->data[0] = oph->data[1]; /* CTRL id */
+ ph->data0 = oph->data[0]; /* CTRL id */
pn_skb_get_src_sockaddr(oskb, &dst);
return pn_skb_send(sk, skb, &dst);
@@ -271,17 +271,17 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
return -EINVAL;
hdr = pnp_hdr(skb);
- if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
+ if (hdr->pep_type != PN_PEP_TYPE_COMMON) {
net_dbg_ratelimited("Phonet unknown PEP type: %u\n",
- (unsigned int)hdr->data[0]);
+ (unsigned int)hdr->pep_type);
return -EOPNOTSUPP;
}
- switch (hdr->data[1]) {
+ switch (hdr->data[0]) {
case PN_PEP_IND_FLOW_CONTROL:
switch (pn->tx_fc) {
case PN_LEGACY_FLOW_CONTROL:
- switch (hdr->data[4]) {
+ switch (hdr->data[3]) {
case PEP_IND_BUSY:
atomic_set(&pn->tx_credits, 0);
break;
@@ -291,7 +291,7 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
}
break;
case PN_ONE_CREDIT_FLOW_CONTROL:
- if (hdr->data[4] == PEP_IND_READY)
+ if (hdr->data[3] == PEP_IND_READY)
atomic_set(&pn->tx_credits, wake = 1);
break;
}
@@ -300,12 +300,12 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
case PN_PEP_IND_ID_MCFC_GRANT_CREDITS:
if (pn->tx_fc != PN_MULTI_CREDIT_FLOW_CONTROL)
break;
- atomic_add(wake = hdr->data[4], &pn->tx_credits);
+ atomic_add(wake = hdr->data[3], &pn->tx_credits);
break;
default:
net_dbg_ratelimited("Phonet unknown PEP indication: %u\n",
- (unsigned int)hdr->data[1]);
+ (unsigned int)hdr->data[0]);
return -EOPNOTSUPP;
}
if (wake)
@@ -317,7 +317,7 @@ static int pipe_rcv_created(struct sock *sk, struct sk_buff *skb)
{
struct pep_sock *pn = pep_sk(sk);
struct pnpipehdr *hdr = pnp_hdr(skb);
- u8 n_sb = hdr->data[0];
+ u8 n_sb = hdr->data0;
pn->rx_fc = pn->tx_fc = PN_LEGACY_FLOW_CONTROL;
__skb_pull(skb, sizeof(*hdr));
@@ -505,7 +505,7 @@ static int pep_connresp_rcv(struct sock *sk, struct sk_buff *skb)
return -ECONNREFUSED;
/* Parse sub-blocks */
- n_sb = hdr->data[4];
+ n_sb = hdr->data[3];
while (n_sb > 0) {
u8 type, buf[6], len = sizeof(buf);
const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -738,7 +738,7 @@ static int pipe_do_remove(struct sock *sk)
ph->utid = 0;
ph->message_id = PNS_PIPE_REMOVE_REQ;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = PAD;
+ ph->data0 = PAD;
return pn_skb_send(sk, skb, NULL);
}
@@ -815,7 +815,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp)
peer_type = hdr->other_pep_type << 8;
/* Parse sub-blocks (options) */
- n_sb = hdr->data[4];
+ n_sb = hdr->data[3];
while (n_sb > 0) {
u8 type, buf[1], len = sizeof(buf);
const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -1106,7 +1106,7 @@ static int pipe_skb_send(struct sock *sk, struct sk_buff *skb)
ph->utid = 0;
if (pn->aligned) {
ph->message_id = PNS_PIPE_ALIGNED_DATA;
- ph->data[0] = 0; /* padding */
+ ph->data0 = 0; /* padding */
} else
ph->message_id = PNS_PIPE_DATA;
ph->pipe_handle = pn->pipe_handle;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4593403fa516a5a4cffe6883c5062d60932cbfbe ]
cards_found is a static variable, but when it enters atl2_probe(),
cards_found is set to zero, the value is not consistent with last probe,
so next behavior is not our expect.
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/atheros/atlx/atl2.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 2ff465848b65..097a0bf592ab 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1338,13 +1338,11 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *netdev;
struct atl2_adapter *adapter;
- static int cards_found;
+ static int cards_found = 0;
unsigned long mmio_start;
int mmio_len;
int err;
- cards_found = 0;
-
err = pci_enable_device(pdev);
if (err)
return err;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: S.j. Wang <[email protected]>
commit cc29ea007347f39f4c5a4d27b0b555955a0277f9 upstream.
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <[email protected]>
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Ackedy-by: Nicolin Chen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/fsl/fsl_esai.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -394,7 +394,8 @@ static int fsl_esai_set_dai_fmt(struct s
break;
case SND_SOC_DAIFMT_RIGHT_J:
/* Data on rising edge of bclk, frame high, right aligned */
- xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCR_xWA;
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ xcr |= ESAI_xCR_xWA;
break;
case SND_SOC_DAIFMT_DSP_A:
/* Data on rising edge of bclk, frame high, 1clk before data */
@@ -451,12 +452,12 @@ static int fsl_esai_set_dai_fmt(struct s
return -EINVAL;
}
- mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR;
+ mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR | ESAI_xCR_xWA;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr);
mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP |
- ESAI_xCCR_xFSD | ESAI_xCCR_xCKD | ESAI_xCR_xWA;
+ ESAI_xCCR_xFSD | ESAI_xCCR_xCKD;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ]
If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mv643xx_eth.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 4182290fdbcf..82f080a5ed5c 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2884,7 +2884,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
ret = mv643xx_eth_shared_of_probe(pdev);
if (ret)
- return ret;
+ goto err_put_clk;
pd = dev_get_platdata(&pdev->dev);
msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
@@ -2892,6 +2892,11 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
infer_hw_params(msp);
return 0;
+
+err_put_clk:
+ if (!IS_ERR(msp->clk))
+ clk_disable_unprepare(msp->clk);
+ return ret;
}
static int mv643xx_eth_shared_remove(struct platform_device *pdev)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 304017d31df36fb61eb2ed3ebf65fb6870b3c731 ]
Topology resources are no longer needed if any element failed to load.
Signed-off-by: Bard liao <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-topology.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c1e76feb3529..824f4d7fc41f 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1770,6 +1770,7 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
struct snd_soc_tplg_ops *ops, const struct firmware *fw, u32 id)
{
struct soc_tplg tplg;
+ int ret;
/* setup parsing context */
memset(&tplg, 0, sizeof(tplg));
@@ -1783,7 +1784,12 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
tplg.bytes_ext_ops = ops->bytes_ext_ops;
tplg.bytes_ext_ops_count = ops->bytes_ext_ops_count;
- return soc_tplg_load(&tplg);
+ ret = soc_tplg_load(&tplg);
+ /* free the created components if fail to load topology */
+ if (ret)
+ snd_soc_tplg_component_remove(comp, SND_SOC_TPLG_INDEX_ALL);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_tplg_component_load);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Penyaev <[email protected]>
commit 401592d2e095947344e10ec0623adbcd58934dd4 upstream.
When VM_NO_GUARD is not set area->size includes adjacent guard page,
thus for correct size checking get_vm_area_size() should be used, but
not area->size.
This fixes possible kernel oops when userspace tries to mmap an area on
1 page bigger than was allocated by vmalloc_user() call: the size check
inside remap_vmalloc_range_partial() accounts non-existing guard page
also, so check successfully passes but vmalloc_to_page() returns NULL
(guard page does not physically exist).
The following code pattern example should trigger an oops:
static int oops_mmap(struct file *file, struct vm_area_struct *vma)
{
void *mem;
mem = vmalloc_user(4096);
BUG_ON(!mem);
/* Do not care about mem leak */
return remap_vmalloc_range(vma, mem, 0);
}
And userspace simply mmaps size + PAGE_SIZE:
mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0);
Possible candidates for oops which do not have any explicit size
checks:
*** drivers/media/usb/stkwebcam/stk-webcam.c:
v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
Or the following one:
*** drivers/video/fbdev/core/fbmem.c
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
...
res = fb->fb_mmap(info, vma);
Where fb_mmap callback calls remap_vmalloc_range() directly without any
explicit checks:
*** drivers/video/fbdev/vfb.c
static int vfb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff);
}
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Penyaev <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: "Luis R. Rodriguez" <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmalloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2162,7 +2162,7 @@ int remap_vmalloc_range_partial(struct v
if (!(area->flags & VM_USERMAP))
return -EINVAL;
- if (kaddr + size > area->addr + area->size)
+ if (kaddr + size > area->addr + get_vm_area_size(area))
return -EINVAL;
do {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ]
We should be using flush_delayed_work() instead of flush_work() in
matrix_keypad_stop() to ensure that we are not missing work that is
scheduled but not yet put in the workqueue (i.e. its delay timer has not
expired yet).
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/matrix_keypad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index c64d87442a62..2e12e31f45c5 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -220,7 +220,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
keypad->stopped = true;
spin_unlock_irq(&keypad->lock);
- flush_work(&keypad->work.work);
+ flush_delayed_work(&keypad->work);
/*
* matrix_keypad_scan() will leave IRQs enabled;
* we should disable them now.
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
commit 9ed3f22223c33347ed963e7c7019cf2956dd4e37 upstream.
When an output port driver is removed, also remove references to it from
any masters. Failing to do this causes a NULL ptr dereference when
configuring another output port:
> BUG: unable to handle kernel NULL pointer dereference at 000000000000000d
> RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth]
> Call Trace:
> dev_attr_store+0x1b/0x30
> sysfs_kf_write+0x3c/0x50
> kernfs_fop_write+0x125/0x1a0
> __vfs_write+0x3a/0x190
> ? __vfs_write+0x5/0x190
> ? _cond_resched+0x1a/0x50
> ? rcu_all_qs+0x5/0xb0
> ? __vfs_write+0x5/0x190
> vfs_write+0xb8/0x1b0
> ksys_write+0x55/0xc0
> __x64_sys_write+0x1a/0x20
> do_syscall_64+0x5a/0x140
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: b27a6a3f97b9 ("intel_th: Add Global Trace Hub driver")
CC: [email protected] # v4.4+
Reported-by: Ammy Yi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/gth.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -591,11 +591,15 @@ static void intel_th_gth_unassign(struct
{
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
int port = othdev->output.port;
+ int master;
spin_lock(>h->gth_lock);
othdev->output.port = -1;
othdev->output.active = false;
gth->output[port].output = NULL;
+ for (master = 0; master < TH_CONFIGURABLE_MASTERS; master++)
+ if (gth->master[master] == port)
+ gth->master[master] = -1;
spin_unlock(>h->gth_lock);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Halil Pasic <[email protected]>
commit 3438b2c039b4bf26881786a1f3450f016d66ad11 upstream.
A queue with a capacity of zero is clearly not a valid virtio queue.
Some emulators report zero queue size if queried with an invalid queue
index. Instead of crashing in this case let us just return -ENOENT. To
make that work properly, let us fix the notifier cleanup logic as well.
Cc: [email protected]
Signed-off-by: Halil Pasic <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/virtio/virtio_ccw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -283,6 +283,8 @@ static void virtio_ccw_drop_indicators(s
{
struct virtio_ccw_vq_info *info;
+ if (!vcdev->airq_info)
+ return;
list_for_each_entry(info, &vcdev->virtqueues, node)
drop_airq_indicator(info->vq, vcdev->airq_info);
}
@@ -423,7 +425,7 @@ static int virtio_ccw_read_vq_conf(struc
ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_READ_VQ_CONF);
if (ret)
return ret;
- return vcdev->config_block->num;
+ return vcdev->config_block->num ?: -ENOENT;
}
static void virtio_ccw_del_vq(struct virtqueue *vq, struct ccw1 *ccw)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Finn Thain <[email protected]>
commit 28713169d879b67be2ef2f84dcf54905de238294 upstream.
This patch fixes a build failure when using GCC 8.1:
/usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock':
block/partitions/ldm.c:153: undefined reference to `strcmp'
This is caused by a new optimization which effectively replaces a
strncmp() call with a strcmp() call. This affects a number of strncmp()
call sites in the kernel.
The entire class of optimizations is avoided with -fno-builtin, which
gets enabled by -ffreestanding. This may avoid possible future build
failures in case new optimizations appear in future compilers.
I haven't done any performance measurements with this patch but I did
count the function calls in a defconfig build. For example, there are now
23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the
other libc functions is smaller.
If this harms performance we can tackle that regression by optimizing
the call sites, ideally using semantic patches. That way, clang and ICC
builds might benfit too.
Cc: [email protected]
Reference: https://marc.info/?l=linux-m68k&m=154514816222244&w=2
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/m68k/Makefile | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -59,7 +59,10 @@ cpuflags-$(CONFIG_M5206e) := $(call cc-o
cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
KBUILD_AFLAGS += $(cpuflags-y)
-KBUILD_CFLAGS += $(cpuflags-y) -pipe
+KBUILD_CFLAGS += $(cpuflags-y)
+
+KBUILD_CFLAGS += -pipe -ffreestanding
+
ifdef CONFIG_MMU
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sowjanya Komatineni <[email protected]>
commit f4e3f4ae1d9c9330de355f432b69952e8cef650c upstream.
Tegra186 and prior supports maximum 4K bytes per packet transfer
including 12 bytes of packet header.
This patch fixes max write length limit to account packet header
size for transfers.
Cc: [email protected] # 4.4+
Reviewed-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -696,7 +696,7 @@ static const struct i2c_algorithm tegra_
/* payload size is only 12 bit */
static struct i2c_adapter_quirks tegra_i2c_quirks = {
.max_read_len = 4096,
- .max_write_len = 4096,
+ .max_write_len = 4096 - 12,
};
static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yangtao Li <[email protected]>
commit 446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream.
of_cpu_device_node_get() will increase the refcount of device_node,
it is necessary to call of_node_put() at the end to release the
refcount.
Fixes: 9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124")
Cc: <[email protected]> # 4.4+
Signed-off-by: Yangtao Li <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/tegra124-cpufreq.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -141,6 +141,8 @@ static int tegra124_cpufreq_probe(struct
platform_set_drvdata(pdev, priv);
+ of_node_put(np);
+
return 0;
out_switch_to_pllx:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felipe Franciosi <[email protected]>
commit 3722e6a52174d7c3a00e6f5efd006ca093f346c1 upstream.
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:
struct virtio_scsi_ctrl_tmf
{
// Device-readable part
le32 type;
le32 subtype;
u8 lun[8];
le64 id;
// Device-writable part
u8 response;
}
The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".
The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It
results in the original scsi command payload (or writable buffers) added to
the tmf.
This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.
Cc: [email protected]
Signed-off-by: Felipe Franciosi <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/virtio_scsi.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -692,7 +692,6 @@ static int virtscsi_device_reset(struct
return FAILED;
memset(cmd, 0, sizeof(*cmd));
- cmd->sc = sc;
cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){
.type = VIRTIO_SCSI_T_TMF,
.subtype = cpu_to_virtio32(vscsi->vdev,
@@ -751,7 +750,6 @@ static int virtscsi_abort(struct scsi_cm
return FAILED;
memset(cmd, 0, sizeof(*cmd));
- cmd->sc = sc;
cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){
.type = VIRTIO_SCSI_T_TMF,
.subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnaldo Carvalho de Melo <[email protected]>
commit 7d7d1bf1d1dabe435ef50efb051724b8664749cb upstream.
We can't access kernel files directly from tools/, so copy the required
bits, and make sure that we detect when the original files, in the
kernel, gets modified.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Daniel Díaz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/arch/x86/include/asm/cpufeatures.h | 336 +++++++++++++++++++++++++
tools/arch/x86/include/asm/disabled-features.h | 65 ++++
tools/arch/x86/include/asm/required-features.h | 106 +++++++
tools/arch/x86/lib/memcpy_64.S | 179 +++++++++++++
tools/arch/x86/lib/memset_64.S | 138 ++++++++++
tools/include/asm/alternative-asm.h | 9
tools/perf/MANIFEST | 8
tools/perf/Makefile.perf | 15 +
tools/perf/bench/mem-memcpy-x86-64-asm.S | 2
tools/perf/bench/mem-memset-x86-64-asm.S | 2
tools/perf/util/include/asm/alternative-asm.h | 9
11 files changed, 856 insertions(+), 13 deletions(-)
--- /dev/null
+++ b/tools/arch/x86/include/asm/cpufeatures.h
@@ -0,0 +1,336 @@
+#ifndef _ASM_X86_CPUFEATURES_H
+#define _ASM_X86_CPUFEATURES_H
+
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
+#include <asm/required-features.h>
+#endif
+
+#ifndef _ASM_X86_DISABLED_FEATURES_H
+#include <asm/disabled-features.h>
+#endif
+
+/*
+ * Defines x86 CPU feature bits
+ */
+#define NCAPINTS 19 /* N 32-bit words worth of info */
+#define NBUGINTS 1 /* N 32-bit bug flags */
+
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name. If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
+#define X86_FEATURE_FPU ( 0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME ( 0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE ( 0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE ( 0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC ( 0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR ( 0*32+ 5) /* Model-Specific Registers */
+#define X86_FEATURE_PAE ( 0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE ( 0*32+ 7) /* Machine Check Exception */
+#define X86_FEATURE_CX8 ( 0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC ( 0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP ( 0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR ( 0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE ( 0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA ( 0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV ( 0*32+15) /* CMOV instructions */
+ /* (plus FCMOVcc, FCOMI with FPU) */
+#define X86_FEATURE_PAT ( 0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36 ( 0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN ( 0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLUSH ( 0*32+19) /* CLFLUSH instruction */
+#define X86_FEATURE_DS ( 0*32+21) /* "dts" Debug Store */
+#define X86_FEATURE_ACPI ( 0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX ( 0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR ( 0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM ( 0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2 ( 0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP ( 0*32+27) /* "ss" CPU self snoop */
+#define X86_FEATURE_HT ( 0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC ( 0*32+29) /* "tm" Automatic clock control */
+#define X86_FEATURE_IA64 ( 0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE ( 0*32+31) /* Pending Break Enable */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL ( 1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MP ( 1*32+19) /* MP Capable. */
+#define X86_FEATURE_NX ( 1*32+20) /* Execute Disable */
+#define X86_FEATURE_MMXEXT ( 1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_FXSR_OPT ( 1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES ( 1*32+26) /* "pdpe1gb" GB pages */
+#define X86_FEATURE_RDTSCP ( 1*32+27) /* RDTSCP */
+#define X86_FEATURE_LM ( 1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT ( 1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW ( 1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY ( 2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN ( 2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI ( 2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX ( 3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR ( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR ( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR ( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
+/* cpu types for specific tunings: */
+#define X86_FEATURE_K8 ( 3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7 ( 3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3 ( 3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4 ( 3*32+ 7) /* "" P4 */
+#define X86_FEATURE_CONSTANT_TSC ( 3*32+ 8) /* TSC ticks at a constant rate */
+#define X86_FEATURE_UP ( 3*32+ 9) /* smp kernel running on up */
+/* free, was #define X86_FEATURE_FXSAVE_LEAK ( 3*32+10) * "" FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_ARCH_PERFMON ( 3*32+11) /* Intel Architectural PerfMon */
+#define X86_FEATURE_PEBS ( 3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS ( 3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32 ( 3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 ( 3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD ( 3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC ( 3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) /* "" Lfence synchronizes RDTSC */
+/* free, was #define X86_FEATURE_11AP ( 3*32+19) * "" Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL ( 3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_ALWAYS ( 3*32+21) /* "" Always-present feature */
+#define X86_FEATURE_XTOPOLOGY ( 3*32+22) /* cpu topology enum extensions */
+#define X86_FEATURE_TSC_RELIABLE ( 3*32+23) /* TSC is known to be reliable */
+#define X86_FEATURE_NONSTOP_TSC ( 3*32+24) /* TSC does not stop in C states */
+/* free, was #define X86_FEATURE_CLFLUSH_MONITOR ( 3*32+25) * "" clflush reqd with monitor */
+#define X86_FEATURE_EXTD_APICID ( 3*32+26) /* has extended APICID (8 bits) */
+#define X86_FEATURE_AMD_DCM ( 3*32+27) /* multi-node processor */
+#define X86_FEATURE_APERFMPERF ( 3*32+28) /* APERFMPERF */
+#define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3 ( 4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ ( 4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64 ( 4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT ( 4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL ( 4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX ( 4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX ( 4*32+ 6) /* Safer mode */
+#define X86_FEATURE_EST ( 4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2 ( 4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3 ( 4*32+ 9) /* Supplemental SSE-3 */
+#define X86_FEATURE_CID ( 4*32+10) /* Context ID */
+#define X86_FEATURE_SDBG ( 4*32+11) /* Silicon Debug */
+#define X86_FEATURE_FMA ( 4*32+12) /* Fused multiply-add */
+#define X86_FEATURE_CX16 ( 4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR ( 4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM ( 4*32+15) /* Performance Capabilities */
+#define X86_FEATURE_PCID ( 4*32+17) /* Process Context Identifiers */
+#define X86_FEATURE_DCA ( 4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1 ( 4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2 ( 4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC ( 4*32+21) /* x2APIC */
+#define X86_FEATURE_MOVBE ( 4*32+22) /* MOVBE instruction */
+#define X86_FEATURE_POPCNT ( 4*32+23) /* POPCNT instruction */
+#define X86_FEATURE_TSC_DEADLINE_TIMER ( 4*32+24) /* Tsc deadline timer */
+#define X86_FEATURE_AES ( 4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE ( 4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE ( 4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX ( 4*32+28) /* Advanced Vector Extensions */
+#define X86_FEATURE_F16C ( 4*32+29) /* 16-bit fp conversions */
+#define X86_FEATURE_RDRAND ( 4*32+30) /* The RDRAND instruction */
+#define X86_FEATURE_HYPERVISOR ( 4*32+31) /* Running on a hypervisor */
+
+/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
+#define X86_FEATURE_XSTORE ( 5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN ( 5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT ( 5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN ( 5*32+ 7) /* "ace_en" on-CPU crypto enabled */
+#define X86_FEATURE_ACE2 ( 5*32+ 8) /* Advanced Cryptography Engine v2 */
+#define X86_FEATURE_ACE2_EN ( 5*32+ 9) /* ACE v2 enabled */
+#define X86_FEATURE_PHE ( 5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN ( 5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM ( 5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN ( 5*32+13) /* PMM enabled */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM ( 6*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY ( 6*32+ 1) /* If yes HyperThreading not valid */
+#define X86_FEATURE_SVM ( 6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC ( 6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY ( 6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM ( 6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A ( 6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE ( 6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH ( 6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW ( 6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS ( 6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_XOP ( 6*32+11) /* extended AVX instructions */
+#define X86_FEATURE_SKINIT ( 6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT ( 6*32+13) /* Watchdog timer */
+#define X86_FEATURE_LWP ( 6*32+15) /* Light Weight Profiling */
+#define X86_FEATURE_FMA4 ( 6*32+16) /* 4 operands MAC instructions */
+#define X86_FEATURE_TCE ( 6*32+17) /* translation cache extension */
+#define X86_FEATURE_NODEID_MSR ( 6*32+19) /* NodeId MSR */
+#define X86_FEATURE_TBM ( 6*32+21) /* trailing bit manipulations */
+#define X86_FEATURE_TOPOEXT ( 6*32+22) /* topology extensions CPUID leafs */
+#define X86_FEATURE_PERFCTR_CORE ( 6*32+23) /* core performance counter extensions */
+#define X86_FEATURE_PERFCTR_NB ( 6*32+24) /* NB performance counter extensions */
+#define X86_FEATURE_BPEXT (6*32+26) /* data breakpoint extension */
+#define X86_FEATURE_PERFCTR_L2 ( 6*32+28) /* L2 performance counter extensions */
+#define X86_FEATURE_MWAITX ( 6*32+29) /* MWAIT extension (MONITORX/MWAITX) */
+
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc, word 7.
+ *
+ * Reuse free bits when adding new feature flags!
+ */
+
+#define X86_FEATURE_CPB ( 7*32+ 2) /* AMD Core Performance Boost */
+#define X86_FEATURE_EPB ( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
+#define X86_FEATURE_INVPCID_SINGLE ( 7*32+ 4) /* Effectively INVPCID && CR4.PCIDE=1 */
+
+#define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */
+#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
+
+#define X86_FEATURE_RETPOLINE ( 7*32+12) /* "" Generic Retpoline mitigation for Spectre variant 2 */
+#define X86_FEATURE_RETPOLINE_AMD ( 7*32+13) /* "" AMD Retpoline mitigation for Spectre variant 2 */
+
+#define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */
+#define X86_FEATURE_RSB_CTXSW ( 7*32+19) /* "" Fill RSB on context switches */
+
+#define X86_FEATURE_MSR_SPEC_CTRL ( 7*32+16) /* "" MSR SPEC_CTRL is implemented */
+#define X86_FEATURE_SSBD ( 7*32+17) /* Speculative Store Bypass Disable */
+
+/* Because the ALTERNATIVE scheme is for members of the X86_FEATURE club... */
+#define X86_FEATURE_KAISER ( 7*32+31) /* CONFIG_PAGE_TABLE_ISOLATION w/o nokaiser */
+
+#define X86_FEATURE_USE_IBPB ( 7*32+21) /* "" Indirect Branch Prediction Barrier enabled*/
+#define X86_FEATURE_USE_IBRS_FW ( 7*32+22) /* "" Use IBRS during runtime firmware calls */
+#define X86_FEATURE_SPEC_STORE_BYPASS_DISABLE ( 7*32+23) /* "" Disable Speculative Store Bypass. */
+#define X86_FEATURE_LS_CFG_SSBD ( 7*32+24) /* "" AMD SSBD implementation */
+
+#define X86_FEATURE_IBRS ( 7*32+25) /* Indirect Branch Restricted Speculation */
+#define X86_FEATURE_IBPB ( 7*32+26) /* Indirect Branch Prediction Barrier */
+#define X86_FEATURE_STIBP ( 7*32+27) /* Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */
+#define X86_FEATURE_L1TF_PTEINV ( 7*32+29) /* "" L1TF workaround PTE inversion */
+
+/* Virtualization flags: Linux defined, word 8 */
+#define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */
+#define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */
+#define X86_FEATURE_FLEXPRIORITY ( 8*32+ 2) /* Intel FlexPriority */
+#define X86_FEATURE_EPT ( 8*32+ 3) /* Intel Extended Page Table */
+#define X86_FEATURE_VPID ( 8*32+ 4) /* Intel Virtual Processor ID */
+
+#define X86_FEATURE_VMMCALL ( 8*32+15) /* Prefer vmmcall to vmcall */
+#define X86_FEATURE_XENPV ( 8*32+16) /* "" Xen paravirtual guest */
+
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
+#define X86_FEATURE_FSGSBASE ( 9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
+#define X86_FEATURE_TSC_ADJUST ( 9*32+ 1) /* TSC adjustment MSR 0x3b */
+#define X86_FEATURE_BMI1 ( 9*32+ 3) /* 1st group bit manipulation extensions */
+#define X86_FEATURE_HLE ( 9*32+ 4) /* Hardware Lock Elision */
+#define X86_FEATURE_AVX2 ( 9*32+ 5) /* AVX2 instructions */
+#define X86_FEATURE_SMEP ( 9*32+ 7) /* Supervisor Mode Execution Protection */
+#define X86_FEATURE_BMI2 ( 9*32+ 8) /* 2nd group bit manipulation extensions */
+#define X86_FEATURE_ERMS ( 9*32+ 9) /* Enhanced REP MOVSB/STOSB */
+#define X86_FEATURE_INVPCID ( 9*32+10) /* Invalidate Processor Context ID */
+#define X86_FEATURE_RTM ( 9*32+11) /* Restricted Transactional Memory */
+#define X86_FEATURE_CQM ( 9*32+12) /* Cache QoS Monitoring */
+#define X86_FEATURE_MPX ( 9*32+14) /* Memory Protection Extension */
+#define X86_FEATURE_AVX512F ( 9*32+16) /* AVX-512 Foundation */
+#define X86_FEATURE_RDSEED ( 9*32+18) /* The RDSEED instruction */
+#define X86_FEATURE_ADX ( 9*32+19) /* The ADCX and ADOX instructions */
+#define X86_FEATURE_SMAP ( 9*32+20) /* Supervisor Mode Access Prevention */
+#define X86_FEATURE_PCOMMIT ( 9*32+22) /* PCOMMIT instruction */
+#define X86_FEATURE_CLFLUSHOPT ( 9*32+23) /* CLFLUSHOPT instruction */
+#define X86_FEATURE_CLWB ( 9*32+24) /* CLWB instruction */
+#define X86_FEATURE_AVX512PF ( 9*32+26) /* AVX-512 Prefetch */
+#define X86_FEATURE_AVX512ER ( 9*32+27) /* AVX-512 Exponential and Reciprocal */
+#define X86_FEATURE_AVX512CD ( 9*32+28) /* AVX-512 Conflict Detection */
+#define X86_FEATURE_SHA_NI ( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
+
+/* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
+#define X86_FEATURE_XSAVEOPT (10*32+ 0) /* XSAVEOPT */
+#define X86_FEATURE_XSAVEC (10*32+ 1) /* XSAVEC */
+#define X86_FEATURE_XGETBV1 (10*32+ 2) /* XGETBV with ECX = 1 */
+#define X86_FEATURE_XSAVES (10*32+ 3) /* XSAVES/XRSTORS */
+
+/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:0 (edx), word 11 */
+#define X86_FEATURE_CQM_LLC (11*32+ 1) /* LLC QoS if 1 */
+
+/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:1 (edx), word 12 */
+#define X86_FEATURE_CQM_OCCUP_LLC (12*32+ 0) /* LLC occupancy monitoring if 1 */
+
+/* AMD-defined CPU features, CPUID level 0x80000008 (ebx), word 13 */
+#define X86_FEATURE_CLZERO (13*32+0) /* CLZERO instruction */
+#define X86_FEATURE_AMD_IBPB (13*32+12) /* Indirect Branch Prediction Barrier */
+#define X86_FEATURE_AMD_IBRS (13*32+14) /* Indirect Branch Restricted Speculation */
+#define X86_FEATURE_AMD_STIBP (13*32+15) /* Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */
+
+/* Thermal and Power Management Leaf, CPUID level 0x00000006 (eax), word 14 */
+#define X86_FEATURE_DTHERM (14*32+ 0) /* Digital Thermal Sensor */
+#define X86_FEATURE_IDA (14*32+ 1) /* Intel Dynamic Acceleration */
+#define X86_FEATURE_ARAT (14*32+ 2) /* Always Running APIC Timer */
+#define X86_FEATURE_PLN (14*32+ 4) /* Intel Power Limit Notification */
+#define X86_FEATURE_PTS (14*32+ 6) /* Intel Package Thermal Status */
+#define X86_FEATURE_HWP (14*32+ 7) /* Intel Hardware P-states */
+#define X86_FEATURE_HWP_NOTIFY (14*32+ 8) /* HWP Notification */
+#define X86_FEATURE_HWP_ACT_WINDOW (14*32+ 9) /* HWP Activity Window */
+#define X86_FEATURE_HWP_EPP (14*32+10) /* HWP Energy Perf. Preference */
+#define X86_FEATURE_HWP_PKG_REQ (14*32+11) /* HWP Package Level Request */
+
+/* AMD SVM Feature Identification, CPUID level 0x8000000a (edx), word 15 */
+#define X86_FEATURE_NPT (15*32+ 0) /* Nested Page Table support */
+#define X86_FEATURE_LBRV (15*32+ 1) /* LBR Virtualization support */
+#define X86_FEATURE_SVML (15*32+ 2) /* "svm_lock" SVM locking MSR */
+#define X86_FEATURE_NRIPS (15*32+ 3) /* "nrip_save" SVM next_rip save */
+#define X86_FEATURE_TSCRATEMSR (15*32+ 4) /* "tsc_scale" TSC scaling support */
+#define X86_FEATURE_VMCBCLEAN (15*32+ 5) /* "vmcb_clean" VMCB clean bits support */
+#define X86_FEATURE_FLUSHBYASID (15*32+ 6) /* flush-by-ASID support */
+#define X86_FEATURE_DECODEASSISTS (15*32+ 7) /* Decode Assists support */
+#define X86_FEATURE_PAUSEFILTER (15*32+10) /* filtered pause intercept */
+#define X86_FEATURE_PFTHRESHOLD (15*32+12) /* pause filter threshold */
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx), word 16 */
+#define X86_FEATURE_PKU (16*32+ 3) /* Protection Keys for Userspace */
+#define X86_FEATURE_OSPKE (16*32+ 4) /* OS Protection Keys Enable */
+
+/* AMD-defined CPU features, CPUID level 0x80000007 (ebx), word 17 */
+#define X86_FEATURE_OVERFLOW_RECOV (17*32+0) /* MCA overflow recovery support */
+#define X86_FEATURE_SUCCOR (17*32+1) /* Uncorrectable error containment and recovery */
+#define X86_FEATURE_SMCA (17*32+3) /* Scalable MCA */
+
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */
+#define X86_FEATURE_AVX512_4VNNIW (18*32+ 2) /* AVX-512 Neural Network Instructions */
+#define X86_FEATURE_AVX512_4FMAPS (18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_SPEC_CTRL (18*32+26) /* "" Speculation Control (IBRS + IBPB) */
+#define X86_FEATURE_INTEL_STIBP (18*32+27) /* "" Single Thread Indirect Branch Predictors */
+#define X86_FEATURE_FLUSH_L1D (18*32+28) /* Flush L1D cache */
+#define X86_FEATURE_ARCH_CAPABILITIES (18*32+29) /* IA32_ARCH_CAPABILITIES MSR (Intel) */
+#define X86_FEATURE_SPEC_CTRL_SSBD (18*32+31) /* "" Speculative Store Bypass Disable */
+
+/*
+ * BUG word(s)
+ */
+#define X86_BUG(x) (NCAPINTS*32 + (x))
+
+#define X86_BUG_F00F X86_BUG(0) /* Intel F00F */
+#define X86_BUG_FDIV X86_BUG(1) /* FPU FDIV */
+#define X86_BUG_COMA X86_BUG(2) /* Cyrix 6x86 coma */
+#define X86_BUG_AMD_TLB_MMATCH X86_BUG(3) /* "tlb_mmatch" AMD Erratum 383 */
+#define X86_BUG_AMD_APIC_C1E X86_BUG(4) /* "apic_c1e" AMD Erratum 400 */
+#define X86_BUG_11AP X86_BUG(5) /* Bad local APIC aka 11AP */
+#define X86_BUG_FXSAVE_LEAK X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
+#define X86_BUG_CLFLUSH_MONITOR X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
+#define X86_BUG_SYSRET_SS_ATTRS X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
+#define X86_BUG_CPU_MELTDOWN X86_BUG(14) /* CPU is affected by meltdown attack and needs kernel page table isolation */
+#define X86_BUG_SPECTRE_V1 X86_BUG(15) /* CPU is affected by Spectre variant 1 attack with conditional branches */
+#define X86_BUG_SPECTRE_V2 X86_BUG(16) /* CPU is affected by Spectre variant 2 attack with indirect branches */
+#define X86_BUG_SPEC_STORE_BYPASS X86_BUG(17) /* CPU is affected by speculative store bypass attack */
+#define X86_BUG_L1TF X86_BUG(18) /* CPU is affected by L1 Terminal Fault */
+
+#endif /* _ASM_X86_CPUFEATURES_H */
--- /dev/null
+++ b/tools/arch/x86/include/asm/disabled-features.h
@@ -0,0 +1,65 @@
+#ifndef _ASM_X86_DISABLED_FEATURES_H
+#define _ASM_X86_DISABLED_FEATURES_H
+
+/* These features, although they might be available in a CPU
+ * will not be used because the compile options to support
+ * them are not present.
+ *
+ * This code allows them to be checked and disabled at
+ * compile time without an explicit #ifdef. Use
+ * cpu_feature_enabled().
+ */
+
+#ifdef CONFIG_X86_INTEL_MPX
+# define DISABLE_MPX 0
+#else
+# define DISABLE_MPX (1<<(X86_FEATURE_MPX & 31))
+#endif
+
+#ifdef CONFIG_X86_64
+# define DISABLE_VME (1<<(X86_FEATURE_VME & 31))
+# define DISABLE_K6_MTRR (1<<(X86_FEATURE_K6_MTRR & 31))
+# define DISABLE_CYRIX_ARR (1<<(X86_FEATURE_CYRIX_ARR & 31))
+# define DISABLE_CENTAUR_MCR (1<<(X86_FEATURE_CENTAUR_MCR & 31))
+# define DISABLE_PCID 0
+#else
+# define DISABLE_VME 0
+# define DISABLE_K6_MTRR 0
+# define DISABLE_CYRIX_ARR 0
+# define DISABLE_CENTAUR_MCR 0
+# define DISABLE_PCID (1<<(X86_FEATURE_PCID & 31))
+#endif /* CONFIG_X86_64 */
+
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+# define DISABLE_PKU 0
+# define DISABLE_OSPKE 0
+#else
+# define DISABLE_PKU (1<<(X86_FEATURE_PKU & 31))
+# define DISABLE_OSPKE (1<<(X86_FEATURE_OSPKE & 31))
+#endif /* CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS */
+
+/*
+ * Make sure to add features to the correct mask
+ */
+#define DISABLED_MASK0 (DISABLE_VME)
+#define DISABLED_MASK1 0
+#define DISABLED_MASK2 0
+#define DISABLED_MASK3 (DISABLE_CYRIX_ARR|DISABLE_CENTAUR_MCR|DISABLE_K6_MTRR)
+#define DISABLED_MASK4 (DISABLE_PCID)
+#define DISABLED_MASK5 0
+#define DISABLED_MASK6 0
+#define DISABLED_MASK7 0
+#define DISABLED_MASK8 0
+#define DISABLED_MASK9 (DISABLE_MPX)
+#define DISABLED_MASK10 0
+#define DISABLED_MASK11 0
+#define DISABLED_MASK12 0
+#define DISABLED_MASK13 0
+#define DISABLED_MASK14 0
+#define DISABLED_MASK15 0
+#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE)
+#define DISABLED_MASK17 0
+#define DISABLED_MASK18 0
+#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19)
+
+#endif /* _ASM_X86_DISABLED_FEATURES_H */
--- /dev/null
+++ b/tools/arch/x86/include/asm/required-features.h
@@ -0,0 +1,106 @@
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
+#define _ASM_X86_REQUIRED_FEATURES_H
+
+/* Define minimum CPUID feature set for kernel These bits are checked
+ really early to actually display a visible error message before the
+ kernel dies. Make sure to assign features to the proper mask!
+
+ Some requirements that are not in CPUID yet are also in the
+ CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
+
+ The real information is in arch/x86/Kconfig.cpu, this just converts
+ the CONFIGs into a bitmask */
+
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU 0
+#endif
+
+#if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+# define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
+#else
+# define NEED_PAE 0
+#endif
+
+#ifdef CONFIG_X86_CMPXCHG64
+# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8 0
+#endif
+
+#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
+# define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
+#else
+# define NEED_CMOV 0
+#endif
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
+#else
+# define NEED_3DNOW 0
+#endif
+
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL 0
+#endif
+
+#ifdef CONFIG_MATOM
+# define NEED_MOVBE (1<<(X86_FEATURE_MOVBE & 31))
+#else
+# define NEED_MOVBE 0
+#endif
+
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_PARAVIRT
+/* Paravirtualized systems may not have PSE or PGE available */
+#define NEED_PSE 0
+#define NEED_PGE 0
+#else
+#define NEED_PSE (1<<(X86_FEATURE_PSE) & 31)
+#define NEED_PGE (1<<(X86_FEATURE_PGE) & 31)
+#endif
+#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
+#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
+#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
+#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
+#define NEED_LM (1<<(X86_FEATURE_LM & 31))
+#else
+#define NEED_PSE 0
+#define NEED_MSR 0
+#define NEED_PGE 0
+#define NEED_FXSR 0
+#define NEED_XMM 0
+#define NEED_XMM2 0
+#define NEED_LM 0
+#endif
+
+#define REQUIRED_MASK0 (NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
+ NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
+ NEED_XMM|NEED_XMM2)
+#define SSE_MASK (NEED_XMM|NEED_XMM2)
+
+#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
+
+#define REQUIRED_MASK2 0
+#define REQUIRED_MASK3 (NEED_NOPL)
+#define REQUIRED_MASK4 (NEED_MOVBE)
+#define REQUIRED_MASK5 0
+#define REQUIRED_MASK6 0
+#define REQUIRED_MASK7 0
+#define REQUIRED_MASK8 0
+#define REQUIRED_MASK9 0
+#define REQUIRED_MASK10 0
+#define REQUIRED_MASK11 0
+#define REQUIRED_MASK12 0
+#define REQUIRED_MASK13 0
+#define REQUIRED_MASK14 0
+#define REQUIRED_MASK15 0
+#define REQUIRED_MASK16 0
+#define REQUIRED_MASK17 0
+#define REQUIRED_MASK18 0
+#define REQUIRED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 19)
+
+#endif /* _ASM_X86_REQUIRED_FEATURES_H */
--- /dev/null
+++ b/tools/arch/x86/lib/memcpy_64.S
@@ -0,0 +1,179 @@
+/* Copyright 2002 Andi Kleen */
+
+#include <linux/linkage.h>
+#include <asm/cpufeatures.h>
+#include <asm/alternative-asm.h>
+
+/*
+ * We build a jump to memcpy_orig by default which gets NOPped out on
+ * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which
+ * have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs
+ * to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
+ */
+
+.weak memcpy
+
+/*
+ * memcpy - Copy a memory block.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * rax original destination
+ */
+ENTRY(__memcpy)
+ENTRY(memcpy)
+ ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
+ "jmp memcpy_erms", X86_FEATURE_ERMS
+
+ movq %rdi, %rax
+ movq %rdx, %rcx
+ shrq $3, %rcx
+ andl $7, %edx
+ rep movsq
+ movl %edx, %ecx
+ rep movsb
+ ret
+ENDPROC(memcpy)
+ENDPROC(__memcpy)
+
+/*
+ * memcpy_erms() - enhanced fast string memcpy. This is faster and
+ * simpler than memcpy. Use memcpy_erms when possible.
+ */
+ENTRY(memcpy_erms)
+ movq %rdi, %rax
+ movq %rdx, %rcx
+ rep movsb
+ ret
+ENDPROC(memcpy_erms)
+
+ENTRY(memcpy_orig)
+ movq %rdi, %rax
+
+ cmpq $0x20, %rdx
+ jb .Lhandle_tail
+
+ /*
+ * We check whether memory false dependence could occur,
+ * then jump to corresponding copy mode.
+ */
+ cmp %dil, %sil
+ jl .Lcopy_backward
+ subq $0x20, %rdx
+.Lcopy_forward_loop:
+ subq $0x20, %rdx
+
+ /*
+ * Move in blocks of 4x8 bytes:
+ */
+ movq 0*8(%rsi), %r8
+ movq 1*8(%rsi), %r9
+ movq 2*8(%rsi), %r10
+ movq 3*8(%rsi), %r11
+ leaq 4*8(%rsi), %rsi
+
+ movq %r8, 0*8(%rdi)
+ movq %r9, 1*8(%rdi)
+ movq %r10, 2*8(%rdi)
+ movq %r11, 3*8(%rdi)
+ leaq 4*8(%rdi), %rdi
+ jae .Lcopy_forward_loop
+ addl $0x20, %edx
+ jmp .Lhandle_tail
+
+.Lcopy_backward:
+ /*
+ * Calculate copy position to tail.
+ */
+ addq %rdx, %rsi
+ addq %rdx, %rdi
+ subq $0x20, %rdx
+ /*
+ * At most 3 ALU operations in one cycle,
+ * so append NOPS in the same 16 bytes trunk.
+ */
+ .p2align 4
+.Lcopy_backward_loop:
+ subq $0x20, %rdx
+ movq -1*8(%rsi), %r8
+ movq -2*8(%rsi), %r9
+ movq -3*8(%rsi), %r10
+ movq -4*8(%rsi), %r11
+ leaq -4*8(%rsi), %rsi
+ movq %r8, -1*8(%rdi)
+ movq %r9, -2*8(%rdi)
+ movq %r10, -3*8(%rdi)
+ movq %r11, -4*8(%rdi)
+ leaq -4*8(%rdi), %rdi
+ jae .Lcopy_backward_loop
+
+ /*
+ * Calculate copy position to head.
+ */
+ addl $0x20, %edx
+ subq %rdx, %rsi
+ subq %rdx, %rdi
+.Lhandle_tail:
+ cmpl $16, %edx
+ jb .Lless_16bytes
+
+ /*
+ * Move data from 16 bytes to 31 bytes.
+ */
+ movq 0*8(%rsi), %r8
+ movq 1*8(%rsi), %r9
+ movq -2*8(%rsi, %rdx), %r10
+ movq -1*8(%rsi, %rdx), %r11
+ movq %r8, 0*8(%rdi)
+ movq %r9, 1*8(%rdi)
+ movq %r10, -2*8(%rdi, %rdx)
+ movq %r11, -1*8(%rdi, %rdx)
+ retq
+ .p2align 4
+.Lless_16bytes:
+ cmpl $8, %edx
+ jb .Lless_8bytes
+ /*
+ * Move data from 8 bytes to 15 bytes.
+ */
+ movq 0*8(%rsi), %r8
+ movq -1*8(%rsi, %rdx), %r9
+ movq %r8, 0*8(%rdi)
+ movq %r9, -1*8(%rdi, %rdx)
+ retq
+ .p2align 4
+.Lless_8bytes:
+ cmpl $4, %edx
+ jb .Lless_3bytes
+
+ /*
+ * Move data from 4 bytes to 7 bytes.
+ */
+ movl (%rsi), %ecx
+ movl -4(%rsi, %rdx), %r8d
+ movl %ecx, (%rdi)
+ movl %r8d, -4(%rdi, %rdx)
+ retq
+ .p2align 4
+.Lless_3bytes:
+ subl $1, %edx
+ jb .Lend
+ /*
+ * Move data from 1 bytes to 3 bytes.
+ */
+ movzbl (%rsi), %ecx
+ jz .Lstore_1byte
+ movzbq 1(%rsi), %r8
+ movzbq (%rsi, %rdx), %r9
+ movb %r8b, 1(%rdi)
+ movb %r9b, (%rdi, %rdx)
+.Lstore_1byte:
+ movb %cl, (%rdi)
+
+.Lend:
+ retq
+ENDPROC(memcpy_orig)
--- /dev/null
+++ b/tools/arch/x86/lib/memset_64.S
@@ -0,0 +1,138 @@
+/* Copyright 2002 Andi Kleen, SuSE Labs */
+
+#include <linux/linkage.h>
+#include <asm/cpufeatures.h>
+#include <asm/alternative-asm.h>
+
+.weak memset
+
+/*
+ * ISO C memset - set a memory block to a byte value. This function uses fast
+ * string to get better performance than the original function. The code is
+ * simpler and shorter than the orignal function as well.
+ *
+ * rdi destination
+ * rsi value (char)
+ * rdx count (bytes)
+ *
+ * rax original destination
+ */
+ENTRY(memset)
+ENTRY(__memset)
+ /*
+ * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
+ * to use it when possible. If not available, use fast string instructions.
+ *
+ * Otherwise, use original memset function.
+ */
+ ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \
+ "jmp memset_erms", X86_FEATURE_ERMS
+
+ movq %rdi,%r9
+ movq %rdx,%rcx
+ andl $7,%edx
+ shrq $3,%rcx
+ /* expand byte value */
+ movzbl %sil,%esi
+ movabs $0x0101010101010101,%rax
+ imulq %rsi,%rax
+ rep stosq
+ movl %edx,%ecx
+ rep stosb
+ movq %r9,%rax
+ ret
+ENDPROC(memset)
+ENDPROC(__memset)
+
+/*
+ * ISO C memset - set a memory block to a byte value. This function uses
+ * enhanced rep stosb to override the fast string function.
+ * The code is simpler and shorter than the fast string function as well.
+ *
+ * rdi destination
+ * rsi value (char)
+ * rdx count (bytes)
+ *
+ * rax original destination
+ */
+ENTRY(memset_erms)
+ movq %rdi,%r9
+ movb %sil,%al
+ movq %rdx,%rcx
+ rep stosb
+ movq %r9,%rax
+ ret
+ENDPROC(memset_erms)
+
+ENTRY(memset_orig)
+ movq %rdi,%r10
+
+ /* expand byte value */
+ movzbl %sil,%ecx
+ movabs $0x0101010101010101,%rax
+ imulq %rcx,%rax
+
+ /* align dst */
+ movl %edi,%r9d
+ andl $7,%r9d
+ jnz .Lbad_alignment
+.Lafter_bad_alignment:
+
+ movq %rdx,%rcx
+ shrq $6,%rcx
+ jz .Lhandle_tail
+
+ .p2align 4
+.Lloop_64:
+ decq %rcx
+ movq %rax,(%rdi)
+ movq %rax,8(%rdi)
+ movq %rax,16(%rdi)
+ movq %rax,24(%rdi)
+ movq %rax,32(%rdi)
+ movq %rax,40(%rdi)
+ movq %rax,48(%rdi)
+ movq %rax,56(%rdi)
+ leaq 64(%rdi),%rdi
+ jnz .Lloop_64
+
+ /* Handle tail in loops. The loops should be faster than hard
+ to predict jump tables. */
+ .p2align 4
+.Lhandle_tail:
+ movl %edx,%ecx
+ andl $63&(~7),%ecx
+ jz .Lhandle_7
+ shrl $3,%ecx
+ .p2align 4
+.Lloop_8:
+ decl %ecx
+ movq %rax,(%rdi)
+ leaq 8(%rdi),%rdi
+ jnz .Lloop_8
+
+.Lhandle_7:
+ andl $7,%edx
+ jz .Lende
+ .p2align 4
+.Lloop_1:
+ decl %edx
+ movb %al,(%rdi)
+ leaq 1(%rdi),%rdi
+ jnz .Lloop_1
+
+.Lende:
+ movq %r10,%rax
+ ret
+
+.Lbad_alignment:
+ cmpq $7,%rdx
+ jbe .Lhandle_7
+ movq %rax,(%rdi) /* unaligned store */
+ movq $8,%r8
+ subq %r9,%r8
+ addq %r8,%rdi
+ subq %r8,%rdx
+ jmp .Lafter_bad_alignment
+.Lfinal:
+ENDPROC(memset_orig)
--- /dev/null
+++ b/tools/include/asm/alternative-asm.h
@@ -0,0 +1,9 @@
+#ifndef _TOOLS_ASM_ALTERNATIVE_ASM_H
+#define _TOOLS_ASM_ALTERNATIVE_ASM_H
+
+/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
+
+#define altinstruction_entry #
+#define ALTERNATIVE_2 #
+
+#endif
--- a/tools/perf/MANIFEST
+++ b/tools/perf/MANIFEST
@@ -11,6 +11,11 @@ tools/arch/sparc/include/asm/barrier_32.
tools/arch/sparc/include/asm/barrier_64.h
tools/arch/tile/include/asm/barrier.h
tools/arch/x86/include/asm/barrier.h
+tools/arch/x86/include/asm/cpufeatures.h
+tools/arch/x86/include/asm/disabled-features.h
+tools/arch/x86/include/asm/required-features.h
+tools/arch/x86/lib/memcpy_64.S
+tools/arch/x86/lib/memset_64.S
tools/arch/xtensa/include/asm/barrier.h
tools/scripts
tools/build
@@ -25,6 +30,7 @@ tools/lib/rbtree.c
tools/lib/symbol/kallsyms.c
tools/lib/symbol/kallsyms.h
tools/lib/util/find_next_bit.c
+tools/include/asm/alternative-asm.h
tools/include/asm/atomic.h
tools/include/asm/barrier.h
tools/include/asm/bug.h
@@ -65,8 +71,6 @@ include/linux/swab.h
arch/*/include/asm/unistd*.h
arch/*/include/uapi/asm/unistd*.h
arch/*/include/uapi/asm/perf_regs.h
-arch/*/lib/memcpy*.S
-arch/*/lib/memset*.S
include/linux/poison.h
include/linux/hw_breakpoint.h
include/uapi/linux/perf_event.h
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -310,6 +310,21 @@ export srctree OUTPUT RM CC LD AR CFLAGS
include $(srctree)/tools/build/Makefile.include
$(PERF_IN): prepare FORCE
+ @(test -f ../../arch/x86/include/asm/disabled-features.h && ( \
+ (diff -B ../arch/x86/include/asm/disabled-features.h ../../arch/x86/include/asm/disabled-features.h >/dev/null) \
+ || echo "Warning: tools/arch/x86/include/asm/disabled-features.h differs from kernel" >&2 )) || true
+ @(test -f ../../arch/x86/include/asm/required-features.h && ( \
+ (diff -B ../arch/x86/include/asm/required-features.h ../../arch/x86/include/asm/required-features.h >/dev/null) \
+ || echo "Warning: tools/arch/x86/include/asm/required-features.h differs from kernel" >&2 )) || true
+ @(test -f ../../arch/x86/include/asm/cpufeatures.h && ( \
+ (diff -B ../arch/x86/include/asm/cpufeatures.h ../../arch/x86/include/asm/cpufeatures.h >/dev/null) \
+ || echo "Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel" >&2 )) || true
+ @(test -f ../../arch/x86/lib/memcpy_64.S && ( \
+ (diff -B ../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memcpy_64.S >/dev/null) \
+ || echo "Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel" >&2 )) || true
+ @(test -f ../../arch/x86/lib/memset_64.S && ( \
+ (diff -B ../arch/x86/lib/memset_64.S ../../arch/x86/lib/memset_64.S >/dev/null) \
+ || echo "Warning: tools/arch/x86/lib/memset_64.S differs from kernel" >&2 )) || true
$(Q)$(MAKE) $(build)=perf
$(OUTPUT)perf: $(PERFLIBS) $(PERF_IN) $(LIBTRACEEVENT_DYNAMIC_LIST)
--- a/tools/perf/bench/mem-memcpy-x86-64-asm.S
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S
@@ -1,7 +1,7 @@
#define memcpy MEMCPY /* don't hide glibc's memcpy() */
#define altinstr_replacement text
#define globl p2align 4; .globl
-#include "../../../arch/x86/lib/memcpy_64.S"
+#include "../../arch/x86/lib/memcpy_64.S"
/*
* We need to provide note.GNU-stack section, saying that we want
* NOT executable stack. Otherwise the final linking will assume that
--- a/tools/perf/bench/mem-memset-x86-64-asm.S
+++ b/tools/perf/bench/mem-memset-x86-64-asm.S
@@ -1,7 +1,7 @@
#define memset MEMSET /* don't hide glibc's memset() */
#define altinstr_replacement text
#define globl p2align 4; .globl
-#include "../../../arch/x86/lib/memset_64.S"
+#include "../../arch/x86/lib/memset_64.S"
/*
* We need to provide note.GNU-stack section, saying that we want
--- a/tools/perf/util/include/asm/alternative-asm.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _PERF_ASM_ALTERNATIVE_ASM_H
-#define _PERF_ASM_ALTERNATIVE_ASM_H
-
-/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
-
-#define altinstruction_entry #
-#define ALTERNATIVE_2 #
-
-#endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit f96c3ac8dfc24b4e38fc4c2eba5fea2107b929d1 upstream.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1928,7 +1928,8 @@ retry:
le16_to_cpu(es->s_reserved_gdt_blocks);
n_group = n_desc_blocks * EXT4_DESC_PER_BLOCK(sb);
n_blocks_count = (ext4_fsblk_t)n_group *
- EXT4_BLOCKS_PER_GROUP(sb);
+ EXT4_BLOCKS_PER_GROUP(sb) +
+ le32_to_cpu(es->s_first_data_block);
n_group--; /* set to last group number */
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 9505b98ccddc454008ca7efff90044e3e857c827 upstream.
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
Cc: All applicable <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/pxa2xx-cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -191,7 +191,7 @@ static int pxa_cpufreq_change_voltage(co
return ret;
}
-static void __init pxa_cpufreq_init_voltages(void)
+static void pxa_cpufreq_init_voltages(void)
{
vcc_core = regulator_get(NULL, "vcc_core");
if (IS_ERR(vcc_core)) {
@@ -207,7 +207,7 @@ static int pxa_cpufreq_change_voltage(co
return 0;
}
-static void __init pxa_cpufreq_init_voltages(void) { }
+static void pxa_cpufreq_init_voltages(void) { }
#endif
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit eaf46edf6ea89675bd36245369c8de5063a0272c upstream.
The NEON MAC calculation routine fails to handle the case correctly
where there is some data in the buffer, and the input fills it up
exactly. In this case, we enter the loop at the end with w8 == 0,
while a negative value is assumed, and so the loop carries on until
the increment of the 32-bit counter wraps around, which is quite
obviously wrong.
So omit the loop altogether in this case, and exit right away.
Reported-by: Eric Biggers <[email protected]>
Fixes: a3fd82105b9d1 ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...")
Cc: [email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/crypto/aes-ce-ccm-core.S | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/arm64/crypto/aes-ce-ccm-core.S
+++ b/arch/arm64/crypto/aes-ce-ccm-core.S
@@ -74,12 +74,13 @@ ENTRY(ce_aes_ccm_auth_data)
beq 10f
ext v0.16b, v0.16b, v0.16b, #1 /* rotate out the mac bytes */
b 7b
-8: mov w7, w8
+8: cbz w8, 91f
+ mov w7, w8
add w8, w8, #16
9: ext v1.16b, v1.16b, v1.16b, #1
adds w7, w7, #1
bne 9b
- eor v0.16b, v0.16b, v1.16b
+91: eor v0.16b, v0.16b, v1.16b
st1 {v0.16b}, [x0]
10: str w8, [x3]
ret
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit c3fcadf0bb765faf45d6d562246e1d08885466df upstream.
Define auxtrace record alignment so that it can be referenced elsewhere.
Note this is preparation for patch "perf intel-pt: Fix overlap calculation
for padding"
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/auxtrace.c | 4 ++--
tools/perf/util/auxtrace.h | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -1226,9 +1226,9 @@ static int __auxtrace_mmap__read(struct
}
/* padding must be written by fn() e.g. record__process_auxtrace() */
- padding = size & 7;
+ padding = size & (PERF_AUXTRACE_RECORD_ALIGNMENT - 1);
if (padding)
- padding = 8 - padding;
+ padding = PERF_AUXTRACE_RECORD_ALIGNMENT - padding;
memset(&ev, 0, sizeof(ev));
ev.auxtrace.header.type = PERF_RECORD_AUXTRACE;
--- a/tools/perf/util/auxtrace.h
+++ b/tools/perf/util/auxtrace.h
@@ -37,6 +37,9 @@ struct record_opts;
struct auxtrace_info_event;
struct events_stats;
+/* Auxtrace records must have the same alignment as perf event records */
+#define PERF_AUXTRACE_RECORD_ALIGNMENT 8
+
enum auxtrace_type {
PERF_AUXTRACE_UNKNOWN,
PERF_AUXTRACE_INTEL_PT,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 17407715240456448e4989bee46ffc93991add83 ]
genlmsg_reply can fail, so propagate its return code
Signed-off-by: Li RongQing <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 0d1abcfec003..0f582117b0e3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3002,7 +3002,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
goto out_err;
}
- genlmsg_reply(skb, info);
+ res = genlmsg_reply(skb, info);
break;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 8127d82705998568b52ac724e28e00941538083d upstream.
If the I/O completion failed with a fatal error, then we should just
exit nfs_pageio_complete_mirror() rather than try to recoalesce.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.0+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1202,7 +1202,7 @@ static void nfs_pageio_complete_mirror(s
desc->pg_mirror_idx = mirror_idx;
for (;;) {
nfs_pageio_doio(desc);
- if (!mirror->pg_recoalesce)
+ if (desc->pg_error < 0 || !mirror->pg_recoalesce)
break;
if (!nfs_do_recoalesce(desc))
break;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 5a99d99e3310a565b0cf63f785b347be9ee0da45 upstream.
Auxtrace records might have up to 7 bytes of padding appended. Adjust
the overlap accordingly.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 36 ++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -26,6 +26,7 @@
#include "../cache.h"
#include "../util.h"
+#include "../auxtrace.h"
#include "intel-pt-insn-decoder.h"
#include "intel-pt-pkt-decoder.h"
@@ -2320,6 +2321,34 @@ static int intel_pt_tsc_cmp(uint64_t tsc
}
}
+#define MAX_PADDING (PERF_AUXTRACE_RECORD_ALIGNMENT - 1)
+
+/**
+ * adj_for_padding - adjust overlap to account for padding.
+ * @buf_b: second buffer
+ * @buf_a: first buffer
+ * @len_a: size of first buffer
+ *
+ * @buf_a might have up to 7 bytes of padding appended. Adjust the overlap
+ * accordingly.
+ *
+ * Return: A pointer into @buf_b from where non-overlapped data starts
+ */
+static unsigned char *adj_for_padding(unsigned char *buf_b,
+ unsigned char *buf_a, size_t len_a)
+{
+ unsigned char *p = buf_b - MAX_PADDING;
+ unsigned char *q = buf_a + len_a - MAX_PADDING;
+ int i;
+
+ for (i = MAX_PADDING; i; i--, p++, q++) {
+ if (*p != *q)
+ break;
+ }
+
+ return p;
+}
+
/**
* intel_pt_find_overlap_tsc - determine start of non-overlapped trace data
* using TSC.
@@ -2370,8 +2399,11 @@ static unsigned char *intel_pt_find_over
/* Same TSC, so buffers are consecutive */
if (!cmp && rem_b >= rem_a) {
+ unsigned char *start;
+
*consecutive = true;
- return buf_b + len_b - (rem_b - rem_a);
+ start = buf_b + len_b - (rem_b - rem_a);
+ return adj_for_padding(start, buf_a, len_a);
}
if (cmp < 0)
return buf_b; /* tsc_a < tsc_b => no overlap */
@@ -2434,7 +2466,7 @@ unsigned char *intel_pt_find_overlap(uns
found = memmem(buf_a, len_a, buf_b, len_a);
if (found) {
*consecutive = true;
- return buf_b + len_a;
+ return adj_for_padding(buf_b + len_a, buf_a, len_a);
}
/* Try again at next PSB in buffer 'a' */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 4d91969ed4dbcefd0e78f77494f0cb8fada9048a upstream.
Whether we need to exit early, or just reprocess the list, we
must not lost track of the request which failed to get recoalesced.
Fixes: 03d5eb65b538 ("NFS: Fix a memory leak in nfs_do_recoalesce")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.0+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1107,7 +1107,6 @@ static int nfs_do_recoalesce(struct nfs_
struct nfs_page *req;
req = list_first_entry(&head, struct nfs_page, wb_list);
- nfs_list_remove_request(req);
if (__nfs_pageio_add_request(desc, req))
continue;
if (desc->pg_error < 0) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <[email protected]>
commit bc5d922c93491878c44c9216e9d227c7eeb81d7f upstream.
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.
Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.
Fix this by rounding up the divisions.
Signed-off-by: Paul Cercueil <[email protected]>
Tested-by: Maarten ter Huurne <[email protected]>
Cc: <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/ingenic/cgu.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -355,16 +355,16 @@ ingenic_clk_round_rate(struct clk_hw *hw
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
struct ingenic_cgu *cgu = ingenic_clk->cgu;
const struct ingenic_cgu_clk_info *clk_info;
- long rate = *parent_rate;
+ unsigned int div = 1;
clk_info = &cgu->clock_info[ingenic_clk->idx];
if (clk_info->type & CGU_CLK_DIV)
- rate /= ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
+ div = ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
else if (clk_info->type & CGU_CLK_FIXDIV)
- rate /= clk_info->fixdiv.div;
+ div = clk_info->fixdiv.div;
- return rate;
+ return DIV_ROUND_UP(*parent_rate, div);
}
static int
@@ -384,7 +384,7 @@ ingenic_clk_set_rate(struct clk_hw *hw,
if (clk_info->type & CGU_CLK_DIV) {
div = ingenic_clk_calc_div(clk_info, parent_rate, req_rate);
- rate = parent_rate / div;
+ rate = DIV_ROUND_UP(parent_rate, div);
if (rate != req_rate)
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: QiaoChong <[email protected]>
commit 21698fd57984cd28207d841dbdaa026d6061bceb upstream.
In the original code before 181bf1e815a2 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815a2 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815a2 ("parport_pc: clean up the modified while loops using for")
Cc: Alan Cox <[email protected]>
Cc: [email protected]
Signed-off-by: QiaoChong <[email protected]>
[rewrite the commit message]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parport/parport_pc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1377,7 +1377,7 @@ static struct superio_struct *find_super
{
int i;
for (i = 0; i < NR_SUPERIOS; i++)
- if (superios[i].io != p->base)
+ if (superios[i].io == p->base)
return &superios[i];
return NULL;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 9580b71b5a7863c24a9bd18bcd2ad759b86b1eff upstream.
Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order
to avoid confusing stacktrace like the one below.
Call Trace:
[c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable)
[c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180
[c0e9dd10] [c0895130] memchr+0x24/0x74
[c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574
[c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8
[c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4
--- interrupt: c0e9df00 at 0x400f330
LR = init_stack+0x1f00/0x2000
[c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable)
[c0e9df20] [c0c27e44] early_irq_init+0x38/0x108
[c0e9df50] [c0c15434] start_kernel+0x310/0x488
[c0e9dff0] [00003484] 0x3484
With this patch the trace becomes:
Call Trace:
[c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable)
[c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180
[c0e9dd10] [c0895150] memchr+0x24/0x74
[c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574
[c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8
[c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4
[c0e9de80] [c00ae3e4] printk+0xa8/0xcc
[c0e9df20] [c0c27e44] early_irq_init+0x38/0x108
[c0e9df50] [c0c15434] start_kernel+0x310/0x488
[c0e9dff0] [00003484] 0x3484
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/entry_32.S | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -685,6 +685,9 @@ fast_exception_return:
mtcr r10
lwz r10,_LINK(r11)
mtlr r10
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r11)
REST_GPR(10, r11)
mtspr SPRN_SRR1,r9
mtspr SPRN_SRR0,r12
@@ -915,6 +918,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRE
mtcrf 0xFF,r10
mtlr r11
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r1)
/*
* Once we put values in SRR0 and SRR1, we are in a state
* where exceptions are not recoverable, since taking an
@@ -952,6 +958,9 @@ exc_exit_restart_end:
mtlr r11
lwz r10,_CCR(r1)
mtcrf 0xff,r10
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r1)
REST_2GPRS(9, r1)
.globl exc_exit_restart
exc_exit_restart:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 6d183ca8baec983dc4208ca45ece3c36763df912 upstream.
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC
deny the use of BATS for mapping memory.
This patch makes sure that the specific wii RAM mapping function
takes it into account as well.
Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram")
Cc: [email protected]
Reviewed-by: Jonathan Neuschafer <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/embedded6xx/wii.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -104,6 +104,10 @@ unsigned long __init wii_mmu_mapin_mem2(
/* MEM2 64MB@0x10000000 */
delta = wii_hole_start + wii_hole_size;
size = top - delta;
+
+ if (__map_without_bats)
+ return delta;
+
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > size)
break;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 0bdb50c531f7377a9da80d3ce2d61f389c84cb30 upstream.
A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality")
cc: [email protected] (v4.2+)
Reported-and-tested-by: Guillaume Perréal <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/device-mapper.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -593,7 +593,7 @@ extern struct ratelimit_state dm_ratelim
*/
#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
-static inline sector_t to_sector(unsigned long n)
+static inline sector_t to_sector(unsigned long long n)
{
return (n >> SECTOR_SHIFT);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream.
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/evergreen_cs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -1299,6 +1299,7 @@ static int evergreen_cs_handle_reg(struc
return -EINVAL;
}
ib[idx] += (u32)((reloc->gpu_offset >> 8) & 0xffffffff);
+ break;
case CB_TARGET_MASK:
track->cb_target_mask = radeon_get_ib_value(p, idx);
track->cb_dirty = true;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 34333cc6c2cb021662fd32e24e618d1b86de95bf upstream.
Regarding segments with a limit==0xffffffff, the SDM officially states:
When the effective limit is FFFFFFFFH (4 GBytes), these accesses may
or may not cause the indicated exceptions. Behavior is
implementation-specific and may vary from one execution to another.
In practice, all CPUs that support VMX ignore limit checks for "flat
segments", i.e. an expand-up data or code segment with base=0 and
limit=0xffffffff. This is subtly different than wrapping the effective
address calculation based on the address size, as the flat segment
behavior also applies to accesses that would wrap the 4g boundary, e.g.
a 4-byte access starting at 0xffffffff will access linear addresses
0xffffffff, 0x0, 0x1 and 0x2.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6702,10 +6702,16 @@ static int get_vmx_mem_address(struct kv
/* Protected mode: #GP(0)/#SS(0) if the segment is unusable.
*/
exn = (s.unusable != 0);
- /* Protected mode: #GP(0)/#SS(0) if the memory
- * operand is outside the segment limit.
+
+ /*
+ * Protected mode: #GP(0)/#SS(0) if the memory operand is
+ * outside the segment limit. All CPUs that support VMX ignore
+ * limit checks for flat segments, i.e. segments with base==0,
+ * limit==0xffffffff and of type expand-up data or code.
*/
- exn = exn || (off + sizeof(u64) > s.limit);
+ if (!(s.base == 0 && s.limit == 0xffffffff &&
+ ((s.type & 8) || !(s.type & 4))))
+ exn = exn || (off + sizeof(u64) > s.limit);
}
if (exn) {
kvm_queue_exception_e(vcpu,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jay Dolan <[email protected]>
commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream.
The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Cc: stable <[email protected]>
Signed-off-by: Jay Dolan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 105 +++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2326,6 +2326,111 @@ static struct pci_serial_quirk pci_seria
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Tao <[email protected]>
commit d600ad1f2bdbf97c4818dcc85b174f72c90c21bd upstream.
For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we
should just bail out instead of hiding the error and
retrying inband IO.
Change all the call sites to pop the error all the way up.
Signed-off-by: Peng Tao <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/direct.c | 15 ++++++++++++++-
fs/nfs/filelayout/filelayout.c | 17 +++++++++++++++--
fs/nfs/flexfilelayout/flexfilelayout.c | 25 ++++++++++++++++++++++---
fs/nfs/pagelist.c | 9 ++++++++-
fs/nfs/pnfs.c | 24 ++++++++++++++++++------
fs/nfs/read.c | 2 +-
6 files changed, 78 insertions(+), 14 deletions(-)
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -670,6 +670,10 @@ static void nfs_direct_write_reschedule(
req = nfs_list_entry(reqs.next);
nfs_direct_setup_mirroring(dreq, &desc, req);
+ if (desc.pg_error < 0) {
+ list_splice_init(&reqs, &failed);
+ goto out_failed;
+ }
list_for_each_entry_safe(req, tmp, &reqs, wb_list) {
if (!nfs_pageio_add_request(&desc, req)) {
@@ -677,13 +681,17 @@ static void nfs_direct_write_reschedule(
nfs_list_add_request(req, &failed);
spin_lock(cinfo.lock);
dreq->flags = 0;
- dreq->error = -EIO;
+ if (desc.pg_error < 0)
+ dreq->error = desc.pg_error;
+ else
+ dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
nfs_release_request(req);
}
nfs_pageio_complete(&desc);
+out_failed:
while (!list_empty(&failed)) {
req = nfs_list_entry(failed.next);
nfs_list_remove_request(req);
@@ -898,6 +906,11 @@ static ssize_t nfs_direct_write_schedule
}
nfs_direct_setup_mirroring(dreq, &desc, req);
+ if (desc.pg_error < 0) {
+ nfs_free_request(req);
+ result = desc.pg_error;
+ break;
+ }
nfs_lock_request(req);
req->wb_index = pos >> PAGE_SHIFT;
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -882,13 +882,19 @@ static void
filelayout_pg_init_read(struct nfs_pageio_descriptor *pgio,
struct nfs_page *req)
{
- if (!pgio->pg_lseg)
+ if (!pgio->pg_lseg) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
0,
NFS4_MAX_UINT64,
IOMODE_READ,
GFP_KERNEL);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
+ }
/* If no lseg, fall back to read through mds */
if (pgio->pg_lseg == NULL)
nfs_pageio_reset_read_mds(pgio);
@@ -901,13 +907,20 @@ filelayout_pg_init_write(struct nfs_page
struct nfs_commit_info cinfo;
int status;
- if (!pgio->pg_lseg)
+ if (!pgio->pg_lseg) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
0,
NFS4_MAX_UINT64,
IOMODE_RW,
GFP_NOFS);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
+ }
+
/* If no lseg, fall back to write through mds */
if (pgio->pg_lseg == NULL)
goto out_mds;
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -786,13 +786,19 @@ ff_layout_pg_init_read(struct nfs_pageio
int ds_idx;
/* Use full layout for now */
- if (!pgio->pg_lseg)
+ if (!pgio->pg_lseg) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
0,
NFS4_MAX_UINT64,
IOMODE_READ,
GFP_KERNEL);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
+ }
/* If no lseg, fall back to read through mds */
if (pgio->pg_lseg == NULL)
goto out_mds;
@@ -826,13 +832,19 @@ ff_layout_pg_init_write(struct nfs_pagei
int i;
int status;
- if (!pgio->pg_lseg)
+ if (!pgio->pg_lseg) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
0,
NFS4_MAX_UINT64,
IOMODE_RW,
GFP_NOFS);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
+ }
/* If no lseg, fall back to write through mds */
if (pgio->pg_lseg == NULL)
goto out_mds;
@@ -868,18 +880,25 @@ static unsigned int
ff_layout_pg_get_mirror_count_write(struct nfs_pageio_descriptor *pgio,
struct nfs_page *req)
{
- if (!pgio->pg_lseg)
+ if (!pgio->pg_lseg) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
0,
NFS4_MAX_UINT64,
IOMODE_RW,
GFP_NOFS);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ goto out;
+ }
+ }
if (pgio->pg_lseg)
return FF_LAYOUT_MIRROR_COUNT(pgio->pg_lseg);
/* no lseg means that pnfs is not in use, so no mirroring here */
nfs_pageio_reset_write_mds(pgio);
+out:
return 1;
}
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -872,6 +872,9 @@ static int nfs_pageio_setup_mirroring(st
mirror_count = pgio->pg_ops->pg_get_mirror_count(pgio, req);
+ if (pgio->pg_error < 0)
+ return pgio->pg_error;
+
if (!mirror_count || mirror_count > NFS_PAGEIO_DESCRIPTOR_MIRROR_MAX)
return -EINVAL;
@@ -980,6 +983,8 @@ static int nfs_pageio_do_add_request(str
} else {
if (desc->pg_ops->pg_init)
desc->pg_ops->pg_init(desc, req);
+ if (desc->pg_error < 0)
+ return 0;
mirror->pg_base = req->wb_pgbase;
}
if (!nfs_can_coalesce_requests(prev, req, desc))
@@ -1145,6 +1150,8 @@ int nfs_pageio_add_request(struct nfs_pa
bytes = req->wb_bytes;
nfs_pageio_setup_mirroring(desc, req);
+ if (desc->pg_error < 0)
+ return 0;
for (midx = 0; midx < desc->pg_mirror_count; midx++) {
if (midx) {
@@ -1230,7 +1237,7 @@ int nfs_pageio_resend(struct nfs_pageio_
nfs_pageio_complete(desc);
if (!list_empty(&failed)) {
list_move(&failed, &hdr->pages);
- return -EIO;
+ return desc->pg_error < 0 ? desc->pg_error : -EIO;
}
return 0;
}
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -909,14 +909,15 @@ send_layoutget(struct pnfs_layout_hdr *l
if (IS_ERR(lseg)) {
switch (PTR_ERR(lseg)) {
- case -ENOMEM:
case -ERESTARTSYS:
+ case -EIO:
+ case -ENOSPC:
+ case -EROFS:
+ case -E2BIG:
break;
default:
- /* remember that LAYOUTGET failed and suspend trying */
- pnfs_layout_io_set_failed(lo, range->iomode);
+ return NULL;
}
- return NULL;
} else
pnfs_layout_clear_fail_bit(lo,
pnfs_iomode_to_fail_bit(range->iomode));
@@ -1625,7 +1626,7 @@ out:
"(%s, offset: %llu, length: %llu)\n",
__func__, ino->i_sb->s_id,
(unsigned long long)NFS_FILEID(ino),
- lseg == NULL ? "not found" : "found",
+ IS_ERR_OR_NULL(lseg) ? "not found" : "found",
iomode==IOMODE_RW ? "read/write" : "read-only",
(unsigned long long)pos,
(unsigned long long)count);
@@ -1804,6 +1805,11 @@ pnfs_generic_pg_init_read(struct nfs_pag
rd_size,
IOMODE_READ,
GFP_KERNEL);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
}
/* If no lseg, fall back to read through mds */
if (pgio->pg_lseg == NULL)
@@ -1816,13 +1822,19 @@ void
pnfs_generic_pg_init_write(struct nfs_pageio_descriptor *pgio,
struct nfs_page *req, u64 wb_size)
{
- if (pgio->pg_lseg == NULL)
+ if (pgio->pg_lseg == NULL) {
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
req->wb_context,
req_offset(req),
wb_size,
IOMODE_RW,
GFP_NOFS);
+ if (IS_ERR(pgio->pg_lseg)) {
+ pgio->pg_error = PTR_ERR(pgio->pg_lseg);
+ pgio->pg_lseg = NULL;
+ return;
+ }
+ }
/* If no lseg, fall back to write through mds */
if (pgio->pg_lseg == NULL)
nfs_pageio_reset_write_mds(pgio);
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -115,7 +115,7 @@ int nfs_readpage_async(struct nfs_open_c
pgm = &pgio.pg_mirrors[0];
NFS_I(inode)->read_io += pgm->pg_bytes_written;
- return 0;
+ return pgio.pg_error < 0 ? pgio.pg_error : 0;
}
static void nfs_readpage_release(struct nfs_page *req)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sakari Ailus <[email protected]>
commit 9dd0627d8d62a7ddb001a75f63942d92b5336561 upstream.
The UVC video driver converts the timestamp from hardware specific unit
to one known by the kernel at the time when the buffer is dequeued. This
is fine in general, but the streamoff operation consists of the
following steps (among other things):
1. uvc_video_clock_cleanup --- the hardware clock sample array is
released and the pointer to the array is set to NULL,
2. buffers in active state are returned to the user and
3. buf_finish callback is called on buffers that are prepared.
buf_finish includes calling uvc_video_clock_update that accesses the
hardware clock sample array.
The above is serialised by a queue specific mutex. Address the problem
by skipping the clock conversion if the hardware clock sample array is
already released.
Fixes: 9c0863b1cc48 ("[media] vb2: call buf_finish from __queue_cancel")
Reported-by: Chiranjeevi Rapolu <[email protected]>
Tested-by: Chiranjeevi Rapolu <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Cc: [email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_video.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -638,6 +638,14 @@ void uvc_video_clock_update(struct uvc_s
if (!uvc_hw_timestamps_param)
return;
+ /*
+ * We will get called from __vb2_queue_cancel() if there are buffers
+ * done but not dequeued by the user, but the sample array has already
+ * been released at that time. Just bail out in that case.
+ */
+ if (!clock->samples)
+ return;
+
spin_lock_irqsave(&clock->lock, flags);
if (clock->count < clock->size)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 946c522b603f281195af1df91837a1d4d1eb3bc9 upstream.
The VMCS.EXIT_QUALIFCATION field reports the displacements of memory
operands for various instructions, including VMX instructions, as a
naturally sized unsigned value, but masks the value by the addr size,
e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is
reported as 0xffffffd8 for a 32-bit address size. Despite some weird
wording regarding sign extension, the SDM explicitly states that bits
beyond the instructions address size are undefined:
In all cases, bits of this field beyond the instruction’s address
size are undefined.
Failure to sign extend the displacement results in KVM incorrectly
treating a negative displacement as a large positive displacement when
the address size of the VMX instruction is smaller than KVM's native
size, e.g. a 32-bit address size on a 64-bit KVM.
The very original decoding, added by commit 064aea774768 ("KVM: nVMX:
Decoding memory operands of VMX instructions"), sort of modeled sign
extension by truncating the final virtual/linear address for a 32-bit
address size. I.e. it messed up the effective address but made it work
by adjusting the final address.
When segmentation checks were added, the truncation logic was kept
as-is and no sign extension logic was introduced. In other words, it
kept calculating the wrong effective address while mostly generating
the correct virtual/linear address. As the effective address is what's
used in the segment limit checks, this results in KVM incorreclty
injecting #GP/#SS faults due to non-existent segment violations when
a nested VMM uses negative displacements with an address size smaller
than KVM's native address size.
Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in
KVM using 0x100000fd8 as the effective address when checking for a
segment limit violation. This causes a 100% failure rate when running
a 32-bit KVM build as L1 on top of a 64-bit KVM L0.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6656,6 +6656,10 @@ static int get_vmx_mem_address(struct kv
/* Addr = segment_base + offset */
/* offset = base + [index * scale] + displacement */
off = exit_qualification; /* holds the displacement */
+ if (addr_size == 1)
+ off = (gva_t)sign_extend64(off, 31);
+ else if (addr_size == 0)
+ off = (gva_t)sign_extend64(off, 15);
if (base_is_valid)
off += kvm_register_read(vcpu, base_reg);
if (index_is_valid)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang, Jun <[email protected]>
commit 1d1f898df6586c5ea9aeaf349f13089c6fa37903 upstream.
The rcu_gp_kthread_wake() function is invoked when it might be necessary
to wake the RCU grace-period kthread. Because self-wakeups are normally
a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from
this kthread, it naturally refuses to do the wakeup.
Unfortunately, natural though it might be, this heuristic fails when
rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler
that interrupted the grace-period kthread just after the final check of
the wait-event condition but just before the schedule() call. In this
case, a wakeup is required, even though the call to rcu_gp_kthread_wake()
is within the RCU grace-period kthread's context. Failing to provide
this wakeup can result in grace periods failing to start, which in turn
results in out-of-memory conditions.
This race window is quite narrow, but it actually did happen during real
testing. It would of course need to be fixed even if it was strictly
theoretical in nature.
This patch does not Cc stable because it does not apply cleanly to
earlier kernel versions.
Fixes: 48a7639ce80c ("rcu: Make callers awaken grace-period kthread")
Reported-by: "He, Bo" <[email protected]>
Co-developed-by: "Zhang, Jun" <[email protected]>
Co-developed-by: "He, Bo" <[email protected]>
Co-developed-by: "xiao, jin" <[email protected]>
Co-developed-by: Bai, Jie A <[email protected]>
Signed-off: "Zhang, Jun" <[email protected]>
Signed-off: "He, Bo" <[email protected]>
Signed-off: "xiao, jin" <[email protected]>
Signed-off: Bai, Jie A <[email protected]>
Signed-off-by: "Zhang, Jun" <[email protected]>
[ paulmck: Switch from !in_softirq() to "!in_interrupt() &&
!in_serving_softirq() to avoid redundant wakeups and to also handle the
interrupt-handler scenario as well as the softirq-handler scenario that
actually occurred in testing. ]
Signed-off-by: Paul E. McKenney <[email protected]>
Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/rcu/tree.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1611,15 +1611,23 @@ static int rcu_future_gp_cleanup(struct
}
/*
- * Awaken the grace-period kthread for the specified flavor of RCU.
- * Don't do a self-awaken, and don't bother awakening when there is
- * nothing for the grace-period kthread to do (as in several CPUs
- * raced to awaken, and we lost), and finally don't try to awaken
- * a kthread that has not yet been created.
+ * Awaken the grace-period kthread. Don't do a self-awaken (unless in
+ * an interrupt or softirq handler), and don't bother awakening when there
+ * is nothing for the grace-period kthread to do (as in several CPUs raced
+ * to awaken, and we lost), and finally don't try to awaken a kthread that
+ * has not yet been created. If all those checks are passed, track some
+ * debug information and awaken.
+ *
+ * So why do the self-wakeup when in an interrupt or softirq handler
+ * in the grace-period kthread's context? Because the kthread might have
+ * been interrupted just as it was going to sleep, and just after the final
+ * pre-sleep check of the awaken condition. In this case, a wakeup really
+ * is required, and is therefore supplied.
*/
static void rcu_gp_kthread_wake(struct rcu_state *rsp)
{
- if (current == rsp->gp_kthread ||
+ if ((current == rsp->gp_kthread &&
+ !in_interrupt() && !in_serving_softirq()) ||
!READ_ONCE(rsp->gp_flags) ||
!rsp->gp_kthread)
return;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream.
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <[email protected]>
Cc: 4.4+ <[email protected]> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/wakeup.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -113,7 +113,6 @@ void wakeup_source_drop(struct wakeup_so
if (!ws)
return;
- del_timer_sync(&ws->timer);
__pm_relax(ws);
}
EXPORT_SYMBOL_GPL(wakeup_source_drop);
@@ -201,6 +200,13 @@ void wakeup_source_remove(struct wakeup_
list_del_rcu(&ws->entry);
spin_unlock_irqrestore(&events_lock, flags);
synchronize_srcu(&wakeup_srcu);
+
+ del_timer_sync(&ws->timer);
+ /*
+ * Clear timer.function to make wakeup_source_not_registered() treat
+ * this wakeup source as not registered.
+ */
+ ws->timer.function = NULL;
}
EXPORT_SYMBOL_GPL(wakeup_source_remove);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit 01215d3edb0f384ddeaa5e4a22c1ae5ff634149f upstream.
The jh pointer may be used uninitialized in the two cases below and the
compiler complain about it when enabling JBUFFER_TRACE macro, fix them.
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/transaction.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1215,11 +1215,12 @@ int jbd2_journal_get_undo_access(handle_
struct journal_head *jh;
char *committed_data = NULL;
- JBUFFER_TRACE(jh, "entry");
if (jbd2_write_access_granted(handle, bh, true))
return 0;
jh = jbd2_journal_add_journal_head(bh);
+ JBUFFER_TRACE(jh, "entry");
+
/*
* Do this first --- it can drop the journal lock, so we want to
* make sure that obtaining the committed_data is done
@@ -1336,15 +1337,17 @@ int jbd2_journal_dirty_metadata(handle_t
if (is_handle_aborted(handle))
return -EROFS;
- if (!buffer_jbd(bh)) {
- ret = -EUCLEAN;
- goto out;
- }
+ if (!buffer_jbd(bh))
+ return -EUCLEAN;
+
/*
* We don't grab jh reference here since the buffer must be part
* of the running transaction.
*/
jh = bh2jh(bh);
+ jbd_debug(5, "journal_head %p\n", jh);
+ JBUFFER_TRACE(jh, "entry");
+
/*
* This and the following assertions are unreliable since we may see jh
* in inconsistent state unless we grab bh_state lock. But this is
@@ -1378,9 +1381,6 @@ int jbd2_journal_dirty_metadata(handle_t
}
journal = transaction->t_journal;
- jbd_debug(5, "journal_head %p\n", jh);
- JBUFFER_TRACE(jh, "entry");
-
jbd_lock_bh_state(bh);
if (jh->b_modified == 0) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aditya Pakki <[email protected]>
commit e406f12dde1a8375d77ea02d91f313fb1a9c6aec upstream.
mddev->sync_thread can be set to NULL on kzalloc failure downstream.
The patch checks for such a scenario and frees allocated resources.
Committer node:
Added similar fix to raid5.c, as suggested by Guoqing.
Cc: [email protected] # v3.16+
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Aditya Pakki <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid10.c | 2 ++
drivers/md/raid5.c | 2 ++
2 files changed, 4 insertions(+)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3755,6 +3755,8 @@ static int run(struct mddev *mddev)
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
"reshape");
+ if (!mddev->sync_thread)
+ goto out_free_conf;
}
return 0;
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -6973,6 +6973,8 @@ static int run(struct mddev *mddev)
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
"reshape");
+ if (!mddev->sync_thread)
+ goto abort;
}
/* Ok, everything is just fine now */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yihao Wu <[email protected]>
commit dd838821f0a29781b185cd8fb8e48d5c177bd838 upstream.
Commit 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before
nfsd startup" is trying to fix a NULL dereference issue, but it
mistakenly checks if the nfsd server is started. So fix it.
Fixes: 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before nfsd startup"
Cc: [email protected]
Reviewed-by: Joseph Qi <[email protected]>
Signed-off-by: Yihao Wu <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfsctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1106,7 +1106,7 @@ static ssize_t write_v4_end_grace(struct
case 'Y':
case 'y':
case '1':
- if (nn->nfsd_serv)
+ if (!nn->nfsd_serv)
return -EBUSY;
nfsd4_end_grace(nn);
break;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit b602345da6cbb135ba68cf042df8ec9a73da7981 upstream.
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.
When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required. It clears ->offset1 but
*does not* clear ->offset.
Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.
This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
BUG: unable to handle kernel paging request at...
If we are unlucky, some innocent page will have the first 4 bytes
corrupted.
nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.
Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.
(Note that the commit hash in the Fixes tag is from the 'history'
tree - this bug predates git).
Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding")
Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654
Cc: [email protected] (v2.6.12+)
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs3proc.c | 16 ++++++++++++++--
fs/nfsd/nfs3xdr.c | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -430,8 +430,19 @@ nfsd3_proc_readdir(struct svc_rqst *rqst
&resp->common, nfs3svc_encode_entry);
memcpy(resp->verf, argp->verf, 8);
resp->count = resp->buffer - argp->buffer;
- if (resp->offset)
- xdr_encode_hyper(resp->offset, argp->cookie);
+ if (resp->offset) {
+ loff_t offset = argp->cookie;
+
+ if (unlikely(resp->offset1)) {
+ /* we ended up with offset on a page boundary */
+ *resp->offset = htonl(offset >> 32);
+ *resp->offset1 = htonl(offset & 0xffffffff);
+ resp->offset1 = NULL;
+ } else {
+ xdr_encode_hyper(resp->offset, offset);
+ }
+ resp->offset = NULL;
+ }
RETURN_STATUS(nfserr);
}
@@ -499,6 +510,7 @@ nfsd3_proc_readdirplus(struct svc_rqst *
} else {
xdr_encode_hyper(resp->offset, offset);
}
+ resp->offset = NULL;
}
RETURN_STATUS(nfserr);
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -898,6 +898,7 @@ encode_entry(struct readdir_cd *ccd, con
} else {
xdr_encode_hyper(cd->offset, offset64);
}
+ cd->offset = NULL;
}
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 03997612904866abe7cdcc992784ef65cb3a4b81 upstream.
CYC packet timestamp calculation depends upon CBR which was being
cleared upon overflow (OVF). That can cause errors due to failing to
synchronize with sideband events. Even if a CBR change has been lost,
the old CBR is still a better estimate than zero. So remove the clearing
of CBR.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 1 -
1 file changed, 1 deletion(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1281,7 +1281,6 @@ static int intel_pt_overflow(struct inte
{
intel_pt_log("ERROR: Buffer overflow\n");
intel_pt_clear_tx_flags(decoder);
- decoder->cbr = 0;
decoder->timestamp_insn_cnt = 0;
decoder->pkt_state = INTEL_PT_STATE_ERR_RESYNC;
decoder->overflow = true;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jordan Niethe <[email protected]>
commit 7b62f9bd2246b7d3d086e571397c14ba52645ef1 upstream.
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface")
Cc: [email protected] # v3.15+
Signed-off-by: Jordan Niethe <[email protected]>
Reviewed-by: Stewart Smith <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/opal-msglog.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/powernv/opal-msglog.c
+++ b/arch/powerpc/platforms/powernv/opal-msglog.c
@@ -92,7 +92,7 @@ out:
}
static struct bin_attribute opal_msglog_attr = {
- .attr = {.name = "msglog", .mode = 0444},
+ .attr = {.name = "msglog", .mode = 0400},
.read = opal_msglog_read
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wanpeng Li <[email protected]>
commit bbeac2830f4de270bb48141681cb730aadf8dce1 upstream.
Reported by syzkaller:
The kvm-intel.unrestricted_guest=0
WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8
RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
Call Trace:
? put_pid+0x3a/0x50
? rcu_read_lock_sched_held+0x79/0x80
? kmem_cache_free+0x2f2/0x350
kvm_vcpu_ioctl+0x340/0x700 [kvm]
? kvm_vcpu_ioctl+0x340/0x700 [kvm]
? __fget+0xfc/0x210
do_vfs_ioctl+0xa4/0x6a0
? __fget+0x11d/0x210
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc2
? __this_cpu_preempt_check+0x13/0x20
The syszkaller folks reported a residual mmio emulation request to userspace
due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and
incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true
and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs
several threads to launch the same vCPU, the thread which lauch this vCPU after
the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will
trigger the warning.
#define _GNU_SOURCE
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/wait.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>
#include <fcntl.h>
#include <unistd.h>
#include <linux/kvm.h>
#include <stdio.h>
int kvmcpu;
struct kvm_run *run;
void* thr(void* arg)
{
int res;
res = ioctl(kvmcpu, KVM_RUN, 0);
printf("ret1=%d exit_reason=%d suberror=%d\n",
res, run->exit_reason, run->internal.suberror);
return 0;
}
void test()
{
int i, kvm, kvmvm;
pthread_t th[4];
kvm = open("/dev/kvm", O_RDWR);
kvmvm = ioctl(kvm, KVM_CREATE_VM, 0);
kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0);
run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0);
srand(getpid());
for (i = 0; i < 4; i++) {
pthread_create(&th[i], 0, thr, 0);
usleep(rand() % 10000);
}
for (i = 0; i < 4; i++)
pthread_join(th[i], 0);
}
int main()
{
for (;;) {
int pid = fork();
if (pid < 0)
exit(1);
if (pid == 0) {
test();
exit(0);
}
int status;
while (waitpid(pid, &status, __WALL) != pid) {}
}
return 0;
}
This patch fixes it by resetting the vcpu->mmio_needed once we receive
the triple fault to avoid the residue.
Reported-by: Dmitry Vyukov <[email protected]>
Tested-by: Dmitry Vyukov <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 1 +
arch/x86/kvm/x86.c | 1 +
2 files changed, 2 insertions(+)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -5574,6 +5574,7 @@ static int handle_external_interrupt(str
static int handle_triple_fault(struct kvm_vcpu *vcpu)
{
vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
+ vcpu->mmio_needed = 0;
return 0;
}
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6478,6 +6478,7 @@ static int vcpu_enter_guest(struct kvm_v
}
if (kvm_check_request(KVM_REQ_TRIPLE_FAULT, vcpu)) {
vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
+ vcpu->mmio_needed = 0;
r = 0;
goto out;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 1c2d14212b15a60300a2d4f6364753e87394c521 upstream.
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
bits file_size
10 17247252480
11 275415851008
12 2196873666560
13 2197948973056
14 2198486220800
15 2198754754560
16 2198888906752
CC: [email protected]
Reported-by: yangerkun <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext2/super.c | 41 ++++++++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 15 deletions(-)
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -721,7 +721,8 @@ static loff_t ext2_max_size(int bits)
{
loff_t res = EXT2_NDIR_BLOCKS;
int meta_blocks;
- loff_t upper_limit;
+ unsigned int upper_limit;
+ unsigned int ppb = 1 << (bits-2);
/* This is calculated to be the largest file size for a
* dense, file such that the total number of
@@ -735,24 +736,34 @@ static loff_t ext2_max_size(int bits)
/* total blocks in file system block size */
upper_limit >>= (bits - 9);
-
- /* indirect blocks */
- meta_blocks = 1;
- /* double indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2));
- /* tripple indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2)));
-
- upper_limit -= meta_blocks;
- upper_limit <<= bits;
-
+ /* Compute how many blocks we can address by block tree */
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
res += 1LL << (3*(bits-2));
+ /* Does block tree limit file size? */
+ if (res < upper_limit)
+ goto check_lfs;
+
+ res = upper_limit;
+ /* How many metadata blocks are needed for addressing upper_limit? */
+ upper_limit -= EXT2_NDIR_BLOCKS;
+ /* indirect blocks */
+ meta_blocks = 1;
+ upper_limit -= ppb;
+ /* double indirect blocks */
+ if (upper_limit < ppb * ppb) {
+ meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb);
+ res -= meta_blocks;
+ goto check_lfs;
+ }
+ meta_blocks += 1 + ppb;
+ upper_limit -= ppb * ppb;
+ /* tripple indirect blocks for the rest */
+ meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb) +
+ DIV_ROUND_UP(upper_limit, ppb*ppb);
+ res -= meta_blocks;
+check_lfs:
res <<= bits;
- if (res > upper_limit)
- res = upper_limit;
-
if (res > MAX_LFS_FILESIZE)
res = MAX_LFS_FILESIZE;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 251b7aea34ba3c4d4fdfa9447695642eb8b8b098 upstream.
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
So remove the broken and unnecessary memcpy()s.
Fixes: 91652be5d1b9 ("[CRYPTO] pcbc: Add Propagated CBC template")
Cc: <[email protected]> # v2.6.21+
Cc: David Howells <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Maxim Zhukov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/pcbc.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
--- a/crypto/pcbc.c
+++ b/crypto/pcbc.c
@@ -52,7 +52,7 @@ static int crypto_pcbc_encrypt_segment(s
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
do {
crypto_xor(iv, src, bsize);
@@ -76,7 +76,7 @@ static int crypto_pcbc_encrypt_inplace(s
int bsize = crypto_cipher_blocksize(tfm);
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
u8 tmpbuf[bsize];
do {
@@ -89,8 +89,6 @@ static int crypto_pcbc_encrypt_inplace(s
src += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
@@ -130,7 +128,7 @@ static int crypto_pcbc_decrypt_segment(s
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
do {
fn(crypto_cipher_tfm(tfm), dst, src);
@@ -142,8 +140,6 @@ static int crypto_pcbc_decrypt_segment(s
dst += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
@@ -156,7 +152,7 @@ static int crypto_pcbc_decrypt_inplace(s
int bsize = crypto_cipher_blocksize(tfm);
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
u8 tmpbuf[bsize];
do {
@@ -169,8 +165,6 @@ static int crypto_pcbc_decrypt_inplace(s
src += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phuong Nguyen <[email protected]>
commit d9140a0da4a230a03426d175145989667758aa6a upstream.
This commit fixes the issue that USB-DMAC hangs silently after system
resumes on R-Car Gen3 hence renesas_usbhs will not work correctly
when using USB-DMAC for bulk transfer e.g. ethernet or serial
gadgets.
The issue can be reproduced by these steps:
1. modprobe g_serial
2. Suspend and resume system.
3. connect a usb cable to host side
4. Transfer data from Host to Target
5. cat /dev/ttyGS0 (Target side)
6. echo "test" > /dev/ttyACM0 (Host side)
The 'cat' will not result anything. However, system still can work
normally.
Currently, USB-DMAC driver does not have system sleep callbacks hence
this driver relies on the PM core to force runtime suspend/resume to
suspend and reinitialize USB-DMAC during system resume. After
the commit 17218e0092f8 ("PM / genpd: Stop/start devices without
pm_runtime_force_suspend/resume()"), PM core will not force
runtime suspend/resume anymore so this issue happens.
To solve this, make system suspend resume explicit by using
pm_runtime_force_{suspend,resume}() as the system sleep callbacks.
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is used to make sure USB-DMAC
suspended after and initialized before renesas_usbhs."
Signed-off-by: Phuong Nguyen <[email protected]>
Signed-off-by: Hiroyuki Yokoyama <[email protected]>
Cc: <[email protected]> # v4.16+
[shimoda: revise the commit log and add Cc tag]
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/sh/usb-dmac.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -700,6 +700,8 @@ static int usb_dmac_runtime_resume(struc
#endif /* CONFIG_PM */
static const struct dev_pm_ops usb_dmac_pm = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(usb_dmac_runtime_suspend, usb_dmac_runtime_resume,
NULL)
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jay Dolan <[email protected]>
commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream.
Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5176,10 +5176,10 @@ static struct pci_device_id serial_pci_t
*/
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5188,10 +5188,10 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5200,10 +5200,10 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5212,13 +5212,13 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7951 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5227,16 +5227,16 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5245,13 +5245,13 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
@@ -5260,19 +5260,19 @@ static struct pci_device_id serial_pci_t
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream.
When using SCSI passthrough in combination with the iSCSI target driver
then cmd->t_state_lock may be obtained from interrupt context. Hence, all
code that obtains cmd->t_state_lock from thread context must disable
interrupts first. This patch avoids that lockdep reports the following:
WARNING: inconsistent lock state
4.18.0-dbg+ #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes:
000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod]
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod]
iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod]
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
irq event stamp: 1281
hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160
hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0
softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0
softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&cmd->t_state_lock)->rlock);
<Interrupt>
lock(&(&cmd->t_state_lock)->rlock);
---
drivers/target/iscsi/iscsi_target.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4232,9 +4232,9 @@ static void iscsit_release_commands_from
struct se_cmd *se_cmd = &cmd->se_cmd;
if (se_cmd->se_tfo != NULL) {
- spin_lock(&se_cmd->t_state_lock);
+ spin_lock_irq(&se_cmd->t_state_lock);
se_cmd->transport_state |= CMD_T_FABRIC_STOP;
- spin_unlock(&se_cmd->t_state_lock);
+ spin_unlock_irq(&se_cmd->t_state_lock);
}
}
spin_unlock_bh(&conn->cmd_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
commit bf7cbaae0831252b416f375ca9b1027ecd4642dd upstream.
Using STP_POLICY_ID_SET ioctl command with dummy_stm device, or any STM
device that supplies zero mmio channel size, will trigger a division by
zero bug in the kernel.
Prevent this by disallowing channel widths other than 1 for such devices.
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/stm/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -477,7 +477,7 @@ static int stm_char_policy_set_ioctl(str
{
struct stm_device *stm = stmf->stm;
struct stp_policy_id *id;
- int ret = -EINVAL;
+ int ret = -EINVAL, wlimit = 1;
u32 size;
if (stmf->output.nr_chans)
@@ -505,8 +505,10 @@ static int stm_char_policy_set_ioctl(str
if (id->__reserved_0 || id->__reserved_1)
goto err_free;
- if (id->width < 1 ||
- id->width > PAGE_SIZE / stm->data->sw_mmiosz)
+ if (stm->data->sw_mmiosz)
+ wlimit = PAGE_SIZE / stm->data->sw_mmiosz;
+
+ if (id->width < 1 || id->width > wlimit)
goto err_free;
ret = stm_file_assign(stmf, id->id, id->width);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Thumshirn <[email protected]>
commit 349ae63f40638a28c6fce52e8447c2d14b84cc0c upstream.
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading")
CC: [email protected] # 4.4+
Reviewed-by: Qu Wenruo <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -6287,10 +6287,10 @@ static int btrfs_check_chunk_valid(struc
}
if ((type & BTRFS_BLOCK_GROUP_RAID10 && sub_stripes != 2) ||
- (type & BTRFS_BLOCK_GROUP_RAID1 && num_stripes < 1) ||
+ (type & BTRFS_BLOCK_GROUP_RAID1 && num_stripes != 2) ||
(type & BTRFS_BLOCK_GROUP_RAID5 && num_stripes < 2) ||
(type & BTRFS_BLOCK_GROUP_RAID6 && num_stripes < 3) ||
- (type & BTRFS_BLOCK_GROUP_DUP && num_stripes > 2) ||
+ (type & BTRFS_BLOCK_GROUP_DUP && num_stripes != 2) ||
((type & BTRFS_BLOCK_GROUP_PROFILE_MASK) == 0 &&
num_stripes != 1)) {
btrfs_err(root->fs_info,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 36da5ff0bea2dc67298150ead8d8471575c54c7d upstream.
The 83xx has 8 SPRG registers and uses at least SPRG4
for DTLB handling LRU.
Fixes: 2319f1239592 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/83xx/suspend-asm.S | 34 +++++++++++++++++++++++-------
1 file changed, 27 insertions(+), 7 deletions(-)
--- a/arch/powerpc/platforms/83xx/suspend-asm.S
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -26,13 +26,13 @@
#define SS_MSR 0x74
#define SS_SDR1 0x78
#define SS_LR 0x7c
-#define SS_SPRG 0x80 /* 4 SPRGs */
-#define SS_DBAT 0x90 /* 8 DBATs */
-#define SS_IBAT 0xd0 /* 8 IBATs */
-#define SS_TB 0x110
-#define SS_CR 0x118
-#define SS_GPREG 0x11c /* r12-r31 */
-#define STATE_SAVE_SIZE 0x16c
+#define SS_SPRG 0x80 /* 8 SPRGs */
+#define SS_DBAT 0xa0 /* 8 DBATs */
+#define SS_IBAT 0xe0 /* 8 IBATs */
+#define SS_TB 0x120
+#define SS_CR 0x128
+#define SS_GPREG 0x12c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x17c
.section .data
.align 5
@@ -103,6 +103,16 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
stw r7, SS_SPRG+12(r3)
stw r8, SS_SDR1(r3)
+ mfspr r4, SPRN_SPRG4
+ mfspr r5, SPRN_SPRG5
+ mfspr r6, SPRN_SPRG6
+ mfspr r7, SPRN_SPRG7
+
+ stw r4, SS_SPRG+16(r3)
+ stw r5, SS_SPRG+20(r3)
+ stw r6, SS_SPRG+24(r3)
+ stw r7, SS_SPRG+28(r3)
+
mfspr r4, SPRN_DBAT0U
mfspr r5, SPRN_DBAT0L
mfspr r6, SPRN_DBAT1U
@@ -493,6 +503,16 @@ mpc83xx_deep_resume:
mtspr SPRN_IBAT7U, r6
mtspr SPRN_IBAT7L, r7
+ lwz r4, SS_SPRG+16(r3)
+ lwz r5, SS_SPRG+20(r3)
+ lwz r6, SS_SPRG+24(r3)
+ lwz r7, SS_SPRG+28(r3)
+
+ mtspr SPRN_SPRG4, r4
+ mtspr SPRN_SPRG5, r5
+ mtspr SPRN_SPRG6, r6
+ mtspr SPRN_SPRG7, r7
+
lwz r4, SS_SPRG+0(r3)
lwz r5, SS_SPRG+4(r3)
lwz r6, SS_SPRG+8(r3)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit 904cdbd41d749a476863a0ca41f6f396774f26e4 upstream.
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
fsx kjournald2
jbd2_journal_commit_transaction
jbd2_journal_revoke commit phase 1~5...
jbd2_journal_forget
belongs to older transaction commit phase 6
jbddirty not clear __jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
test_clear_buffer_jbddirty
mark_buffer_dirty
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/transaction.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1578,14 +1578,21 @@ int jbd2_journal_forget (handle_t *handl
/* However, if the buffer is still owned by a prior
* (committing) transaction, we can't drop it yet... */
JBUFFER_TRACE(jh, "belongs to older transaction");
- /* ... but we CAN drop it from the new transaction if we
- * have also modified it since the original commit. */
+ /* ... but we CAN drop it from the new transaction through
+ * marking the buffer as freed and set j_next_transaction to
+ * the new transaction, so that not only the commit code
+ * knows it should clear dirty bits when it is done with the
+ * buffer, but also the buffer can be checkpointed only
+ * after the new transaction commits. */
- if (jh->b_next_transaction) {
- J_ASSERT(jh->b_next_transaction == transaction);
+ set_buffer_freed(bh);
+
+ if (!jh->b_next_transaction) {
spin_lock(&journal->j_list_lock);
- jh->b_next_transaction = NULL;
+ jh->b_next_transaction = transaction;
spin_unlock(&journal->j_list_lock);
+ } else {
+ J_ASSERT(jh->b_next_transaction == transaction);
/*
* only drop a reference if this transaction modified
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit d2f276c8d3c224d5b493c42b6cf006ae4e64fb1c upstream.
When shutting down the timer, ensure that after we have stopped the
timer any pending interrupts are cleared. This fixes a problem when
suspending, as interrupts are disabled before the timer is stopped,
so the timer interrupt may still be asserted, preventing the system
entering a low power state when the wfi is executed.
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Cc: <[email protected]> # v4.3+
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/exynos_mct.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -402,6 +402,7 @@ static int set_state_shutdown(struct clo
mevt = container_of(evt, struct mct_clock_event_device, evt);
exynos4_mct_tick_stop(mevt);
+ exynos4_mct_tick_clear(mevt);
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.
LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).
Cc: <[email protected]>
Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/s2mps11.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -372,7 +372,7 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
- regulator_desc_s2mps11_ldo(35, STEP_50_MV),
+ regulator_desc_s2mps11_ldo(35, STEP_25_MV),
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@@ -382,8 +382,8 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]
Newer ARC gcc handles lp_start, lp_end in a different way and doesn't
like them in the clobber list.
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/include/asm/uaccess.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index 57387b567f34..f077a419cb51 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -209,7 +209,7 @@ __arc_copy_from_user(void *to, const void __user *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return n;
}
@@ -438,7 +438,7 @@ __arc_copy_to_user(void __user *to, const void *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return n;
}
@@ -658,7 +658,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
" .previous \n"
: "+r"(d_char), "+r"(res)
: "i"(0)
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return res;
}
@@ -691,7 +691,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
" .previous \n"
: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
: "g"(-EFAULT), "r"(count)
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return res;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit 8e928218780e2f1cf2f5891c7575e8f0b284fcce upstream.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b46790f ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
echo "Dropping page cache..."
sysctl -q vm.drop_caches=1
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
umount /dev/sdc
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit
005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <[email protected]>
Fixes: 808f80b46790f ("Btrfs: update fix for read corruption of compressed and shared extents")
Fixes: 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared extents")
Cc: [email protected] # 4.3+
Tested-by: Zygo Blaxell <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/extent_io.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3106,11 +3106,11 @@ static int __do_readpage(struct extent_i
*/
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) &&
prev_em_start && *prev_em_start != (u64)-1 &&
- *prev_em_start != em->orig_start)
+ *prev_em_start != em->start)
force_bio_submit = true;
if (prev_em_start)
- *prev_em_start = em->orig_start;
+ *prev_em_start = em->start;
free_extent_map(em);
em = NULL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zev Weiss <[email protected]>
commit 8cf7630b29701d364f8df4a50e4f1f5e752b2778 upstream.
This bug has apparently existed since the introduction of this function
in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").
As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Zev Weiss <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: <[email protected]> [2.6.2+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sysctl.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2306,7 +2306,16 @@ static int do_proc_dointvec_minmax_conv(
{
struct do_proc_dointvec_minmax_conv_param *param = data;
if (write) {
- int val = *negp ? -*lvalp : *lvalp;
+ int val;
+ if (*negp) {
+ if (*lvalp > (unsigned long) INT_MAX + 1)
+ return -EINVAL;
+ val = -*lvalp;
+ } else {
+ if (*lvalp > (unsigned long) INT_MAX)
+ return -EINVAL;
+ val = *lvalp;
+ }
if ((param->min && *param->min > val) ||
(param->max && *param->max < val))
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ]
Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.
Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index b505b87661f8..07c4153e6f3d 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -656,7 +656,7 @@ static const char * const sd_a_groups[] = {
static const char * const sdxc_a_groups[] = {
"sdxc_d0_0_a", "sdxc_d13_0_a", "sdxc_d47_a", "sdxc_clk_a",
- "sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d0_13_1_a"
+ "sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d13_1_a"
};
static const char * const pcm_a_groups[] = {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Shilovsky <[email protected]>
commit 6dfbd84684700cb58b34e8602c01c12f3d2595c8 upstream.
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.
The patches fixes generic tests 075 and 112 from the xfs-tests.
Cc: <[email protected]>
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/file.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2753,14 +2753,16 @@ cifs_strict_writev(struct kiocb *iocb, s
* these pages but not on the region from pos to ppos+len-1.
*/
written = cifs_user_writev(iocb, from);
- if (written > 0 && CIFS_CACHE_READ(cinode)) {
+ if (CIFS_CACHE_READ(cinode)) {
/*
- * Windows 7 server can delay breaking level2 oplock if a write
- * request comes - break it on the client to prevent reading
- * an old data.
+ * We have read level caching and we have just sent a write
+ * request to the server thus making data in the cache stale.
+ * Zap the cache and set oplock/lease level to NONE to avoid
+ * reading stale data from the cache. All subsequent read
+ * operations will read new data from the server.
*/
cifs_zap_mapping(inode);
- cifs_dbg(FYI, "Set no oplock for inode=%p after a write operation\n",
+ cifs_dbg(FYI, "Set Oplock/Lease to NONE for inode=%p after write\n",
inode);
cinode->oplock = 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb2ba2d75a2d673e76ddaf13a9bd30d6a8b1bb08 ]
Fix the creation of shortcuts for which the length of the index key value
is an exact multiple of the machine word size. The problem is that the
code that blanks off the unused bits of the shortcut value malfunctions if
the number of bits in the last word equals machine word size. This is due
to the "<<" operator being given a shift of zero in this case, and so the
mask that should be all zeros is all ones instead. This causes the
subsequent masking operation to clear everything rather than clearing
nothing.
Ordinarily, the presence of the hash at the beginning of the tree index key
makes the issue very hard to test for, but in this case, it was encountered
due to a development mistake that caused the hash output to be either 0
(keyring) or 1 (non-keyring) only. This made it susceptible to the
keyctl/unlink/valid test in the keyutils package.
The fix is simply to skip the blanking if the shift would be 0. For
example, an index key that is 64 bits long would produce a 0 shift and thus
a 'blank' of all 1s. This would then be inverted and AND'd onto the
index_key, incorrectly clearing the entire last word.
Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/assoc_array.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/lib/assoc_array.c b/lib/assoc_array.c
index 5cd093589c5a..3b46c5433b7a 100644
--- a/lib/assoc_array.c
+++ b/lib/assoc_array.c
@@ -781,9 +781,11 @@ all_leaves_cluster_together:
new_s0->index_key[i] =
ops->get_key_chunk(index_key, i * ASSOC_ARRAY_KEY_CHUNK_SIZE);
- blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
- pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
- new_s0->index_key[keylen - 1] &= ~blank;
+ if (level & ASSOC_ARRAY_KEY_CHUNK_MASK) {
+ blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
+ pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
+ new_s0->index_key[keylen - 1] &= ~blank;
+ }
/* This now reduces to a node splitting exercise for which we'll need
* to regenerate the disparity table.
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 29b00e609960ae0fcff382f4c7079dd0874a5311 ]
When we made the shmem_reserve_inode call in shmem_link conditional, we
forgot to update the declaration for ret so that it always has a known
value. Dan Carpenter pointed out this deficiency in the original patch.
Fixes: 1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Matej Kupljen <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/shmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 183ed4dae219..f11aec40f2e1 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2293,7 +2293,7 @@ static int shmem_create(struct inode *dir, struct dentry *dentry, umode_t mode,
static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
struct inode *inode = d_inode(old_dentry);
- int ret;
+ int ret = 0;
/*
* No ordinary (disk based) filesystem counts links as inodes;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1b5ba350784242eb1f899bcffd95d2c7cff61e84 ]
Arm TC2 fails cpu hotplug stress test.
This issue was tracked down to a missing copy of the new affinity
cpumask for the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().
Fix it by replacing the arm specific hotplug cpu migration with the
generic irq code.
This is the counterpart implementation to commit 217d453d473c ("arm64:
fix a migrating irq bug when hotplug cpu").
Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y).
The vexpress-spc interrupt (irq=22) on this board is affine to CPU0.
Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when
CPU0 is hotplugged out.
Suggested-by: Marc Zyngier <[email protected]>
Signed-off-by: Dietmar Eggemann <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/Kconfig | 1 +
arch/arm/include/asm/irq.h | 1 -
arch/arm/kernel/irq.c | 62 --------------------------------------
arch/arm/kernel/smp.c | 2 +-
4 files changed, 2 insertions(+), 64 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 34e1569a11ee..3a0277c6c060 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1475,6 +1475,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
+ select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1bd9510de1b9..cae4df39f02e 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -24,7 +24,6 @@
#ifndef __ASSEMBLY__
struct irqaction;
struct pt_regs;
-extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
void handle_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 1d45320ee125..900c591913d5 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -31,7 +31,6 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/seq_file.h>
-#include <linux/ratelimit.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kallsyms.h>
@@ -119,64 +118,3 @@ int __init arch_probe_nr_irqs(void)
return nr_irqs;
}
#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
- struct irq_data *d = irq_desc_get_irq_data(desc);
- const struct cpumask *affinity = irq_data_get_affinity_mask(d);
- struct irq_chip *c;
- bool ret = false;
-
- /*
- * If this is a per-CPU interrupt, or the affinity does not
- * include this CPU, then we have nothing to do.
- */
- if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
- return false;
-
- if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
- affinity = cpu_online_mask;
- ret = true;
- }
-
- c = irq_data_get_irq_chip(d);
- if (!c->irq_set_affinity)
- pr_debug("IRQ%u: unable to set affinity\n", d->irq);
- else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
- cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
- return ret;
-}
-
-/*
- * The current CPU has been marked offline. Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
- unsigned int i;
- struct irq_desc *desc;
- unsigned long flags;
-
- local_irq_save(flags);
-
- for_each_irq_desc(i, desc) {
- bool affinity_broken;
-
- raw_spin_lock(&desc->lock);
- affinity_broken = migrate_one_irq(desc);
- raw_spin_unlock(&desc->lock);
-
- if (affinity_broken)
- pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
- i, smp_processor_id());
- }
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e42be5800f37..08ce9e36dc5a 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -218,7 +218,7 @@ int __cpu_disable(void)
/*
* OK - migrate IRQs away from this CPU
*/
- migrate_irqs();
+ irq_migrate_all_off_this_cpu();
/*
* Flush user cache and TLB mappings, and then remove this CPU
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1062af920c07f5b54cf5060fde3339da6df0cf6b ]
tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.
But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted. If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.
Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: f4e0c30c191 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Reported-by: Matej Kupljen <[email protected]>
Acked-by: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/shmem.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index d902b413941a..183ed4dae219 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2299,10 +2299,14 @@ static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentr
* No ordinary (disk based) filesystem counts links as inodes;
* but each new link needs a new dentry, pinning lowmem, and
* tmpfs dentries cannot be pruned until they are unlinked.
+ * But if an O_TMPFILE file is linked into the tmpfs, the
+ * first link must skip that, to get the accounting right.
*/
- ret = shmem_reserve_inode(inode->i_sb);
- if (ret)
- goto out;
+ if (inode->i_nlink) {
+ ret = shmem_reserve_inode(inode->i_sb);
+ if (ret)
+ goto out;
+ }
dir->i_size += BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit ee60ad219f5c7c4fb2f047f88037770063ef785f ]
The race occurs in __mkroute_output() when 2 threads lookup a dst:
CPU A CPU B
find_exception()
find_exception() [fnhe expires]
ip_del_fnhe() [fnhe is deleted]
rt_bind_exception()
In rt_bind_exception() it will bind a deleted fnhe with the new dst, and
this dst will get no chance to be freed. It causes a dev defcnt leak and
consecutive dmesg warnings:
unregister_netdevice: waiting for ethX to become free. Usage count = 1
Especially thanks Jon to identify the issue.
This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop
binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr
and daddr in rt_bind_exception().
It works as both ip_del_fnhe() and rt_bind_exception() are protected by
fnhe_lock and the fhne is freed by kfree_rcu().
Fixes: deed49df7390 ("route: check and remove route cache when we get route")
Signed-off-by: Jon Maxwell <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/route.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1604,6 +1604,10 @@ static void ip_del_fnhe(struct fib_nh *n
if (fnhe->fnhe_daddr == daddr) {
rcu_assign_pointer(*fnhe_p, rcu_dereference_protected(
fnhe->fnhe_next, lockdep_is_held(&fnhe_lock)));
+ /* set fnhe_daddr to 0 to ensure it won't bind with
+ * new dsts in rt_bind_exception().
+ */
+ fnhe->fnhe_daddr = 0;
fnhe_flush_routes(fnhe);
kfree_rcu(fnhe, rcu);
break;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 74698f6971f25d045301139413578865fc2bd8f9 ]
Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.
Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/head.S | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 0382eba4bf7b..6299a8a361ee 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -478,8 +478,7 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
/* GICv3 system register access */
mrs x0, id_aa64pfr0_el1
ubfx x0, x0, #24, #4
- cmp x0, #1
- b.ne 3f
+ cbz x0, 3f
mrs_s x0, ICC_SRE_EL2
orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 77568e535af7c4f97eaef1e555bf0af83772456c upstream.
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest. The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early. This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element. Fix it.
Fixes: 900a081f6912 ("crypto: ahash - Fix early termination in hash walk")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ahash.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -85,17 +85,17 @@ static int hash_walk_new_entry(struct cr
int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err)
{
unsigned int alignmask = walk->alignmask;
- unsigned int nbytes = walk->entrylen;
walk->data -= walk->offset;
- if (nbytes && walk->offset & alignmask && !err) {
- walk->offset = ALIGN(walk->offset, alignmask + 1);
- nbytes = min(nbytes,
- ((unsigned int)(PAGE_SIZE)) - walk->offset);
- walk->entrylen -= nbytes;
+ if (walk->entrylen && (walk->offset & alignmask) && !err) {
+ unsigned int nbytes;
+ walk->offset = ALIGN(walk->offset, alignmask + 1);
+ nbytes = min(walk->entrylen,
+ (unsigned int)(PAGE_SIZE - walk->offset));
if (nbytes) {
+ walk->entrylen -= nbytes;
walk->data += walk->offset;
return nbytes;
}
@@ -115,7 +115,7 @@ int crypto_hash_walk_done(struct crypto_
if (err)
return err;
- if (nbytes) {
+ if (walk->entrylen) {
walk->offset = 0;
walk->pg++;
return hash_walk_next(walk);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
[ Upstream commit 7cc9f7003a969d359f608ebb701d42cafe75b84a ]
When running Docker with userns isolation e.g. --userns-remap="default"
and spawning up some containers with CAP_NET_ADMIN under this realm, I
noticed that link changes on ipvlan slave device inside that container
can affect all devices from this ipvlan group which are in other net
namespaces where the container should have no permission to make changes
to, such as the init netns, for example.
This effectively allows to undo ipvlan private mode and switch globally to
bridge mode where slaves can communicate directly without going through
hostns, or it allows to switch between global operation mode (l2/l3/l3s)
for everyone bound to the given ipvlan master device. libnetwork plugin
here is creating an ipvlan master and ipvlan slave in hostns and a slave
each that is moved into the container's netns upon creation event.
* In hostns:
# ip -d a
[...]
8: cilium_host@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.0.1/32 scope link cilium_host
valid_lft forever preferred_lft forever
[...]
* Spawn container & change ipvlan mode setting inside of it:
# docker run -dt --cap-add=NET_ADMIN --network cilium-net --name client -l app=test cilium/netperf
9fff485d69dcb5ce37c9e33ca20a11ccafc236d690105aadbfb77e4f4170879c
# docker exec -ti client ip -d a
[...]
10: cilium0@if4: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0
valid_lft forever preferred_lft forever
# docker exec -ti client ip link change link cilium0 name cilium0 type ipvlan mode l2
# docker exec -ti client ip -d a
[...]
10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0
valid_lft forever preferred_lft forever
* In hostns (mode switched to l2):
# ip -d a
[...]
8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.0.1/32 scope link cilium_host
valid_lft forever preferred_lft forever
[...]
Same l3 -> l2 switch would also happen by creating another slave inside
the container's network namespace when specifying the existing cilium0
link to derive the actual (bond0) master:
# docker exec -ti client ip link add link cilium0 name cilium1 type ipvlan mode l2
# docker exec -ti client ip -d a
[...]
2: cilium1@if4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0
valid_lft forever preferred_lft forever
* In hostns:
# ip -d a
[...]
8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
inet 10.41.0.1/32 scope link cilium_host
valid_lft forever preferred_lft forever
[...]
One way to mitigate it is to check CAP_NET_ADMIN permissions of
the ipvlan master device's ns, and only then allow to change
mode or flags for all devices bound to it. Above two cases are
then disallowed after the patch.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Mahesh Bandewar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ipvlan/ipvlan_main.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -389,7 +389,12 @@ static int ipvlan_nl_changelink(struct n
struct ipvl_dev *ipvlan = netdev_priv(dev);
struct ipvl_port *port = ipvlan_port_get_rtnl(ipvlan->phy_dev);
- if (data && data[IFLA_IPVLAN_MODE]) {
+ if (!data)
+ return 0;
+ if (!ns_capable(dev_net(ipvlan->phy_dev)->user_ns, CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (data[IFLA_IPVLAN_MODE]) {
u16 nmode = nla_get_u16(data[IFLA_IPVLAN_MODE]);
ipvlan_set_port_mode(port, nmode);
@@ -454,6 +459,8 @@ static int ipvlan_link_new(struct net *s
struct ipvl_dev *tmp = netdev_priv(phy_dev);
phy_dev = tmp->phy_dev;
+ if (!ns_capable(dev_net(phy_dev)->user_ns, CAP_NET_ADMIN))
+ return -EPERM;
} else if (!netif_is_ipvlan_port(phy_dev)) {
err = ipvlan_port_create(phy_dev);
if (err < 0)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
[ Upstream commit e15ce4b8d11227007577e6dc1364d288b8874fbe ]
As part of unloading a device, the driver switches from
FW command event mode to FW command polling mode.
Part of switching over to polling mode is freeing the command context array
memory (unfortunately, currently, without NULLing the command context array
pointer).
The reset flow calls "complete" to complete all outstanding fw commands
(if we are in event mode). The check for event vs. polling mode here
is to test if the command context array pointer is NULL.
If the reset flow is activated after the switch to polling mode, it will
attempt (incorrectly) to complete all the commands in the context array --
because the pointer was not NULLed when the driver switched over to polling
mode.
As a result, we have a use-after-free situation, which results in a
kernel crash.
For example:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ...
CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: events hv_eject_device_work [pci_hyperv]
task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000
RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8
RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0
R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0
Call Trace:
[<ffffffff876c7adc>] complete+0x3c/0x50
[<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core]
[<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core]
[<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core]
[<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core]
[<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0
[<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0
[<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core]
[<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core]
[<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core]
[<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core]
[<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core]
[<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core]
The fix is to set the command context array pointer to NULL after freeing
the array.
Fixes: f5aef5aa3506 ("net/mlx4_core: Activate reset flow upon fatal command cases")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2636,6 +2636,7 @@ void mlx4_cmd_use_polling(struct mlx4_de
down(&priv->cmd.event_sem);
kfree(priv->cmd.context);
+ priv->cmd.context = NULL;
up(&priv->cmd.poll_sem);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hou Tao <[email protected]>
commit 5e3cc1ee1405a7eb3487ed24f786dec01b4cbe1f upstream.
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013
sp : ec497e20 ip : ed608030 fp : ec497e3c
r10: 00000000 r9 : ec497f00 r8 : ed608030
r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780
r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ac48006a DAC: 00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
[<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
[<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
[<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
[<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
[<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
[<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
[<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
[<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
[<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
[<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
[<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
[<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)
[[email protected]: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 7549ae3e81cc ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <[email protected]>
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/9p/v9fs_vfs.h | 23 +++++++++++++++++++++--
fs/9p/vfs_file.c | 6 +++++-
fs/9p/vfs_inode.c | 23 +++++++++++------------
fs/9p/vfs_inode_dotl.c | 27 ++++++++++++++-------------
fs/9p/vfs_super.c | 4 ++--
5 files changed, 53 insertions(+), 30 deletions(-)
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -40,6 +40,9 @@
*/
#define P9_LOCK_TIMEOUT (30*HZ)
+/* flags for v9fs_stat2inode() & v9fs_stat2inode_dotl() */
+#define V9FS_STAT2INODE_KEEP_ISIZE 1
+
extern struct file_system_type v9fs_fs_type;
extern const struct address_space_operations v9fs_addr_operations;
extern const struct file_operations v9fs_file_operations;
@@ -61,8 +64,10 @@ int v9fs_init_inode(struct v9fs_session_
struct inode *inode, umode_t mode, dev_t);
void v9fs_evict_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
-void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
-void v9fs_stat2inode_dotl(struct p9_stat_dotl *, struct inode *);
+void v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
+ struct super_block *sb, unsigned int flags);
+void v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode,
+ unsigned int flags);
int v9fs_dir_release(struct inode *inode, struct file *filp);
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct p9_wstat *stat);
@@ -83,4 +88,18 @@ static inline void v9fs_invalidate_inode
}
int v9fs_open_to_dotl_flags(int flags);
+
+static inline void v9fs_i_size_write(struct inode *inode, loff_t i_size)
+{
+ /*
+ * 32-bit need the lock, concurrent updates could break the
+ * sequences and make i_size_read() loop forever.
+ * 64-bit updates are atomic and can skip the locking.
+ */
+ if (sizeof(i_size) > sizeof(long))
+ spin_lock(&inode->i_lock);
+ i_size_write(inode, i_size);
+ if (sizeof(i_size) > sizeof(long))
+ spin_unlock(&inode->i_lock);
+}
#endif
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -442,7 +442,11 @@ v9fs_file_write_iter(struct kiocb *iocb,
i_size = i_size_read(inode);
if (iocb->ki_pos > i_size) {
inode_add_bytes(inode, iocb->ki_pos - i_size);
- i_size_write(inode, iocb->ki_pos);
+ /*
+ * Need to serialize against i_size_write() in
+ * v9fs_stat2inode()
+ */
+ v9fs_i_size_write(inode, iocb->ki_pos);
}
return retval;
}
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -538,7 +538,7 @@ static struct inode *v9fs_qid_iget(struc
if (retval)
goto error;
- v9fs_stat2inode(st, inode, sb);
+ v9fs_stat2inode(st, inode, sb, 0);
v9fs_cache_inode_get_cookie(inode);
unlock_new_inode(inode);
return inode;
@@ -1074,7 +1074,7 @@ v9fs_vfs_getattr(struct vfsmount *mnt, s
if (IS_ERR(st))
return PTR_ERR(st);
- v9fs_stat2inode(st, d_inode(dentry), d_inode(dentry)->i_sb);
+ v9fs_stat2inode(st, d_inode(dentry), d_inode(dentry)->i_sb, 0);
generic_fillattr(d_inode(dentry), stat);
p9stat_free(st);
@@ -1152,12 +1152,13 @@ static int v9fs_vfs_setattr(struct dentr
* @stat: Plan 9 metadata (mistat) structure
* @inode: inode to populate
* @sb: superblock of filesystem
+ * @flags: control flags (e.g. V9FS_STAT2INODE_KEEP_ISIZE)
*
*/
void
v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
- struct super_block *sb)
+ struct super_block *sb, unsigned int flags)
{
umode_t mode;
char ext[32];
@@ -1198,10 +1199,11 @@ v9fs_stat2inode(struct p9_wstat *stat, s
mode = p9mode2perm(v9ses, stat);
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
- i_size_write(inode, stat->length);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE))
+ v9fs_i_size_write(inode, stat->length);
/* not real number of blocks, but 512 byte ones ... */
- inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
+ inode->i_blocks = (stat->length + 512 - 1) >> 9;
v9inode->cache_validity &= ~V9FS_INO_INVALID_ATTR;
}
@@ -1389,9 +1391,9 @@ int v9fs_refresh_inode(struct p9_fid *fi
{
int umode;
dev_t rdev;
- loff_t i_size;
struct p9_wstat *st;
struct v9fs_session_info *v9ses;
+ unsigned int flags;
v9ses = v9fs_inode2v9ses(inode);
st = p9_client_stat(fid);
@@ -1404,16 +1406,13 @@ int v9fs_refresh_inode(struct p9_fid *fi
if ((inode->i_mode & S_IFMT) != (umode & S_IFMT))
goto out;
- spin_lock(&inode->i_lock);
/*
* We don't want to refresh inode->i_size,
* because we may have cached data
*/
- i_size = inode->i_size;
- v9fs_stat2inode(st, inode, inode->i_sb);
- if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
- inode->i_size = i_size;
- spin_unlock(&inode->i_lock);
+ flags = (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) ?
+ V9FS_STAT2INODE_KEEP_ISIZE : 0;
+ v9fs_stat2inode(st, inode, inode->i_sb, flags);
out:
p9stat_free(st);
kfree(st);
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -143,7 +143,7 @@ static struct inode *v9fs_qid_iget_dotl(
if (retval)
goto error;
- v9fs_stat2inode_dotl(st, inode);
+ v9fs_stat2inode_dotl(st, inode, 0);
v9fs_cache_inode_get_cookie(inode);
retval = v9fs_get_acl(inode, fid);
if (retval)
@@ -498,7 +498,7 @@ v9fs_vfs_getattr_dotl(struct vfsmount *m
if (IS_ERR(st))
return PTR_ERR(st);
- v9fs_stat2inode_dotl(st, d_inode(dentry));
+ v9fs_stat2inode_dotl(st, d_inode(dentry), 0);
generic_fillattr(d_inode(dentry), stat);
/* Change block size to what the server returned */
stat->blksize = st->st_blksize;
@@ -609,11 +609,13 @@ int v9fs_vfs_setattr_dotl(struct dentry
* v9fs_stat2inode_dotl - populate an inode structure with stat info
* @stat: stat structure
* @inode: inode to populate
+ * @flags: ctrl flags (e.g. V9FS_STAT2INODE_KEEP_ISIZE)
*
*/
void
-v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode)
+v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode,
+ unsigned int flags)
{
umode_t mode;
struct v9fs_inode *v9inode = V9FS_I(inode);
@@ -633,7 +635,8 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
- i_size_write(inode, stat->st_size);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE))
+ v9fs_i_size_write(inode, stat->st_size);
inode->i_blocks = stat->st_blocks;
} else {
if (stat->st_result_mask & P9_STATS_ATIME) {
@@ -663,8 +666,9 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl
}
if (stat->st_result_mask & P9_STATS_RDEV)
inode->i_rdev = new_decode_dev(stat->st_rdev);
- if (stat->st_result_mask & P9_STATS_SIZE)
- i_size_write(inode, stat->st_size);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE) &&
+ stat->st_result_mask & P9_STATS_SIZE)
+ v9fs_i_size_write(inode, stat->st_size);
if (stat->st_result_mask & P9_STATS_BLOCKS)
inode->i_blocks = stat->st_blocks;
}
@@ -926,9 +930,9 @@ v9fs_vfs_follow_link_dotl(struct dentry
int v9fs_refresh_inode_dotl(struct p9_fid *fid, struct inode *inode)
{
- loff_t i_size;
struct p9_stat_dotl *st;
struct v9fs_session_info *v9ses;
+ unsigned int flags;
v9ses = v9fs_inode2v9ses(inode);
st = p9_client_getattr_dotl(fid, P9_STATS_ALL);
@@ -940,16 +944,13 @@ int v9fs_refresh_inode_dotl(struct p9_fi
if ((inode->i_mode & S_IFMT) != (st->st_mode & S_IFMT))
goto out;
- spin_lock(&inode->i_lock);
/*
* We don't want to refresh inode->i_size,
* because we may have cached data
*/
- i_size = inode->i_size;
- v9fs_stat2inode_dotl(st, inode);
- if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
- inode->i_size = i_size;
- spin_unlock(&inode->i_lock);
+ flags = (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) ?
+ V9FS_STAT2INODE_KEEP_ISIZE : 0;
+ v9fs_stat2inode_dotl(st, inode, flags);
out:
kfree(st);
return 0;
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -165,7 +165,7 @@ static struct dentry *v9fs_mount(struct
goto release_sb;
}
d_inode(root)->i_ino = v9fs_qid2ino(&st->qid);
- v9fs_stat2inode_dotl(st, d_inode(root));
+ v9fs_stat2inode_dotl(st, d_inode(root), 0);
kfree(st);
} else {
struct p9_wstat *st = NULL;
@@ -176,7 +176,7 @@ static struct dentry *v9fs_mount(struct
}
d_inode(root)->i_ino = v9fs_qid2ino(&st->qid);
- v9fs_stat2inode(st, d_inode(root), sb);
+ v9fs_stat2inode(st, d_inode(root), sb, 0);
p9stat_free(st);
kfree(st);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sasha Levin <[email protected]>
commit 8f5fed1e917588f946ad8882bd47a4093db0ff4c upstream.
We may sleep inside a the lock, so use a mutex rather than spinlock.
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Cc: Emil Karlson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/9p/cache.c | 8 ++++----
fs/9p/v9fs.h | 2 +-
fs/9p/vfs_inode.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/fs/9p/cache.c
+++ b/fs/9p/cache.c
@@ -243,14 +243,14 @@ void v9fs_cache_inode_set_cookie(struct
if (!v9inode->fscache)
return;
- spin_lock(&v9inode->fscache_lock);
+ mutex_lock(&v9inode->fscache_lock);
if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
v9fs_cache_inode_flush_cookie(inode);
else
v9fs_cache_inode_get_cookie(inode);
- spin_unlock(&v9inode->fscache_lock);
+ mutex_unlock(&v9inode->fscache_lock);
}
void v9fs_cache_inode_reset_cookie(struct inode *inode)
@@ -264,7 +264,7 @@ void v9fs_cache_inode_reset_cookie(struc
old = v9inode->fscache;
- spin_lock(&v9inode->fscache_lock);
+ mutex_lock(&v9inode->fscache_lock);
fscache_relinquish_cookie(v9inode->fscache, 1);
v9ses = v9fs_inode2v9ses(inode);
@@ -274,7 +274,7 @@ void v9fs_cache_inode_reset_cookie(struc
p9_debug(P9_DEBUG_FSC, "inode %p revalidating cookie old %p new %p\n",
inode, old, v9inode->fscache);
- spin_unlock(&v9inode->fscache_lock);
+ mutex_unlock(&v9inode->fscache_lock);
}
int __v9fs_fscache_release_page(struct page *page, gfp_t gfp)
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -123,7 +123,7 @@ struct v9fs_session_info {
struct v9fs_inode {
#ifdef CONFIG_9P_FSCACHE
- spinlock_t fscache_lock;
+ struct mutex fscache_lock;
struct fscache_cookie *fscache;
#endif
struct p9_qid qid;
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -244,7 +244,7 @@ struct inode *v9fs_alloc_inode(struct su
return NULL;
#ifdef CONFIG_9P_FSCACHE
v9inode->fscache = NULL;
- spin_lock_init(&v9inode->fscache_lock);
+ mutex_init(&v9inode->fscache_lock);
#endif
v9inode->writeback_fid = NULL;
v9inode->cache_validity = 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <[email protected]>
commit 7dc661bd8d3261053b69e4e2d0050cd1ee540fc1 upstream.
ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The
entry matches vendor_id in root directory and model_id in unit
directory of configuration ROM for IEEE 1394 bus.
On the other hand, configuration ROM of Focusrite Liquid Saffire 56
has the same vendor_id and model_id. This device is an application of
TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be
bound to it randomly instead of ALSA dice driver. At present, drivers
in ALSA firewire stack can not handle this situation appropriately.
This commit uses more identical mod_alias for Focusrite Saffire Pro 10
I/O in ALSA bebob driver.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 042a829d bus_info_length 4, crc_length 42, crc 33437
404 31333934 bus_name "1394"
408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400)
40c 00130e01 company_id 00130e |
410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0
root directory
-----------------------------------------------------------------
414 0009d31c directory_length 9, crc 54044
418 04000014 hardware version
41c 0c0083c0 node capabilities per IEEE 1394
420 0300130e vendor
424 81000012 --> descriptor leaf at 46c
428 17000006 model
42c 81000016 --> descriptor leaf at 484
430 130120c2 version
434 d1000002 --> unit directory at 43c
438 d4000006 --> dependent info directory at 450
unit directory at 43c
-----------------------------------------------------------------
43c 0004707c directory_length 4, crc 28796
440 1200a02d specifier id: 1394 TA
444 13010001 version: AV/C
448 17000006 model
44c 81000013 --> descriptor leaf at 498
dependent info directory at 450
-----------------------------------------------------------------
450 000637c7 directory_length 6, crc 14279
454 120007f5 specifier id
458 13000001 version
45c 3affffc7 (immediate value)
460 3b100000 (immediate value)
464 3cffffc7 (immediate value)
468 3d600000 (immediate value)
descriptor leaf at 46c
-----------------------------------------------------------------
46c 00056f3b leaf_length 5, crc 28475
470 00000000 textual descriptor
474 00000000 minimal ASCII
478 466f6375 "Focu"
47c 73726974 "srit"
480 65000000 "e"
descriptor leaf at 484
-----------------------------------------------------------------
484 0004a165 leaf_length 4, crc 41317
488 00000000 textual descriptor
48c 00000000 minimal ASCII
490 50726f31 "Pro1"
494 30494f00 "0IO"
descriptor leaf at 498
-----------------------------------------------------------------
498 0004a165 leaf_length 4, crc 41317
49c 00000000 textual descriptor
4a0 00000000 minimal ASCII
4a4 50726f31 "Pro1"
4a8 30494f00 "0IO"
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 040442e4 bus_info_length 4, crc_length 4, crc 17124
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00130e04 company_id 00130e |
410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9
root directory
-----------------------------------------------------------------
414 00065612 directory_length 6, crc 22034
418 0300130e vendor
41c 8100000a --> descriptor leaf at 444
420 17000006 model
424 8100000e --> descriptor leaf at 45c
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000418a0 directory_length 4, crc 6304
434 1200130e specifier id
438 13000001 version
43c 17000006 model
440 8100000f --> descriptor leaf at 47c
descriptor leaf at 444
-----------------------------------------------------------------
444 00056f3b leaf_length 5, crc 28475
448 00000000 textual descriptor
44c 00000000 minimal ASCII
450 466f6375 "Focu"
454 73726974 "srit"
458 65000000 "e"
descriptor leaf at 45c
-----------------------------------------------------------------
45c 000762c6 leaf_length 7, crc 25286
460 00000000 textual descriptor
464 00000000 minimal ASCII
468 4c495155 "LIQU"
46c 49445f53 "ID_S"
470 41464649 "AFFI"
474 52455f35 "RE_5"
478 36000000 "6"
descriptor leaf at 47c
-----------------------------------------------------------------
47c 000762c6 leaf_length 7, crc 25286
480 00000000 textual descriptor
484 00000000 minimal ASCII
488 4c495155 "LIQU"
48c 49445f53 "ID_S"
490 41464649 "AFFI"
494 52455f35 "RE_5"
498 36000000 "6"
Cc: <[email protected]> # v3.16+
Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/bebob/bebob.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -422,7 +422,19 @@ static const struct ieee1394_device_id b
/* Focusrite, SaffirePro 26 I/O */
SND_BEBOB_DEV_ENTRY(VEN_FOCUSRITE, 0x00000003, &saffirepro_26_spec),
/* Focusrite, SaffirePro 10 I/O */
- SND_BEBOB_DEV_ENTRY(VEN_FOCUSRITE, 0x00000006, &saffirepro_10_spec),
+ {
+ // The combination of vendor_id and model_id is the same as the
+ // same as the one of Liquid Saffire 56.
+ .match_flags = IEEE1394_MATCH_VENDOR_ID |
+ IEEE1394_MATCH_MODEL_ID |
+ IEEE1394_MATCH_SPECIFIER_ID |
+ IEEE1394_MATCH_VERSION,
+ .vendor_id = VEN_FOCUSRITE,
+ .model_id = 0x000006,
+ .specifier_id = 0x00a02d,
+ .version = 0x010001,
+ .driver_data = (kernel_ulong_t)&saffirepro_10_spec,
+ },
/* Focusrite, Saffire(no label and LE) */
SND_BEBOB_DEV_ENTRY(VEN_FOCUSRITE, MODEL_FOCUSRITE_SAFFIRE_BOTH,
&saffire_spec),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 59cbf56fcd98ba2a715b6e97c4e43f773f956393 ]
Same reasons than the ones explained in commit 4179cb5a4c92
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")
netif_rx() or gro_cells_receive() must be called under a strict contract.
At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.
A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.
Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP
Virtual drivers do not have this guarantee, and must
therefore make the check themselves.
Otherwise we risk use-after-free and/or crashes.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1229,6 +1229,14 @@ static void vxlan_rcv(struct vxlan_sock
}
}
+ rcu_read_lock();
+
+ if (unlikely(!(vxlan->dev->flags & IFF_UP))) {
+ rcu_read_unlock();
+ atomic_long_inc(&vxlan->dev->rx_dropped);
+ goto drop;
+ }
+
stats = this_cpu_ptr(vxlan->dev->tstats);
u64_stats_update_begin(&stats->syncp);
stats->rx_packets++;
@@ -1237,6 +1245,8 @@ static void vxlan_rcv(struct vxlan_sock
gro_cells_receive(&vxlan->gro_cells, skb);
+ rcu_read_unlock();
+
return;
drop:
if (tun_dst)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jozsef Kadlecsik <[email protected]>
commit 644c7e48cb59cfc6988ddc7bf3d3b1ba5fe7fa9d upstream.
Baozeng Ding reported a KASAN stack out of bounds issue - it uncovered that
the TCP option parsing routines in netfilter TCP connection tracking could
read one byte out of the buffer of the TCP options. Therefore in the patch
we check that the available data length is large enough to parse both TCP
option code and size.
Reported-by: Baozeng Ding <[email protected]>
Tested-by: Baozeng Ding <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Cc: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_proto_tcp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -410,6 +410,8 @@ static void tcp_options(const struct sk_
length--;
continue;
default:
+ if (length < 2)
+ return;
opsize=*ptr++;
if (opsize < 2) /* "silly options" */
return;
@@ -470,6 +472,8 @@ static void tcp_sack(const struct sk_buf
length--;
continue;
default:
+ if (length < 2)
+ return;
opsize = *ptr++;
if (opsize < 2) /* "silly options" */
return;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream.
In Odroid XU3 Lite board, the temperature levels reported for thermal
zone 0 were weird. In warm room:
/sys/class/thermal/thermal_zone0/temp:32000
/sys/class/thermal/thermal_zone1/temp:51000
/sys/class/thermal/thermal_zone2/temp:55000
/sys/class/thermal/thermal_zone3/temp:54000
/sys/class/thermal/thermal_zone4/temp:51000
Sometimes after booting the value was even equal to ambient temperature
which is highly unlikely to be a real temperature of sensor in SoC.
The thermal sensor's calibration (trimming) is based on fused values.
In case of the board above, the fused values are: 35, 52, 43, 58 and 43
(corresponding to each TMU device). However driver defined a minimum value
for fused data as 40 and for smaller values it was using a hard-coded 55
instead. This lead to mapping data from sensor to wrong temperatures
for thermal zone 0.
Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10)
do not impose any limits on fused values. Since we do not have any
knowledge about these limits, use 0 as a minimum accepted fused value.
This should essentially allow accepting any reasonable fused value thus
behaving like vendor driver.
The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing
exynos4412 with one change - the samsung,tmu_min_efuse_value.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Eduardo Valentin <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Tested-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Anand Moon <[email protected]>
Tested-by: Anand Moon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 25 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5420.dtsi | 10 ++++----
2 files changed, 30 insertions(+), 5 deletions(-)
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for Exynos5420 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <[email protected]>
+ * Copyright (c) 2017 Krzysztof Kozlowski <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <0>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -777,7 +777,7 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
@@ -786,7 +786,7 @@
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
@@ -795,7 +795,7 @@
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
@@ -804,7 +804,7 @@
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
@@ -813,7 +813,7 @@
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
+ #include "exynos5420-tmu-sensor-conf.dtsi"
};
thermal-zones {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit ee74d0bd4325efb41e38affe5955f920ed973f23 ]
In case x25_connect() fails and frees the socket neighbour,
we also need to undo the change done to x25->state.
Before my last bug fix, we had use-after-free so this
patch fixes a latent bug.
syzbot report :
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173
Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f
RSP: 0018:ffff888076717a08 EFLAGS: 00010207
RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000
kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env
RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c
RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d
R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840
kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5'
R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013
FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
x25_release+0xd0/0x340 net/x25/af_x25.c:658
__sock_release+0xd3/0x2b0 net/socket.c:579
sock_close+0x1b/0x30 net/socket.c:1162
__fput+0x2df/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
get_signal+0x1961/0x1d50 kernel/signal.c:2388
do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816
exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4
R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff
Modules linked in:
Fixes: 95d6ebd53c79 ("net/x25: fix use-after-free in x25_device_event()")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: andrew hendry <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/x25/af_x25.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -817,6 +817,7 @@ out_put_neigh:
x25_neigh_put(x25->neighbour);
x25->neighbour = NULL;
read_unlock_bh(&x25_list_lock);
+ x25->state = X25_STATE_0;
}
out_put_route:
x25_route_put(rt);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 4aa68e07d845562561f5e73c04aa521376e95252 upstream.
When checking for permission to view keys whilst reading from
/proc/keys, we should use the credentials with which the /proc/keys file
was opened. This is because, in a classic type of exploit, it can be
possible to bypass checks for the *current* credentials by passing the
file descriptor to a suid program.
Following commit 34dbbcdbf633 ("Make file credentials available to the
seqfile interfaces") we can finally fix it. So let's do it.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Zubin Mithra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/proc.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -187,7 +187,7 @@ static int proc_keys_show(struct seq_fil
struct keyring_search_context ctx = {
.index_key = key->index_key,
- .cred = current_cred(),
+ .cred = m->file->f_cred,
.match_data.cmp = lookup_user_key_possessed,
.match_data.raw_data = key,
.match_data.lookup_type = KEYRING_SEARCH_LOOKUP_DIRECT,
@@ -207,11 +207,7 @@ static int proc_keys_show(struct seq_fil
}
}
- /* check whether the current task is allowed to view the key (assuming
- * non-possession)
- * - the caller holds a spinlock, and thus the RCU read lock, making our
- * access to __current_cred() safe
- */
+ /* check whether the current task is allowed to view the key */
rc = key_task_permission(key_ref, ctx.cred, KEY_NEED_VIEW);
if (rc < 0)
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]
Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.
It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.
Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.
Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Pavel Machek <[email protected]>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-mmp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 013fc9659a84..2fe2bcb63a71 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -34,6 +34,9 @@
#define SEL_INT_PENDING (1 << 6)
#define SEL_INT_NUM_MASK 0x3f
+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ (1 << 5)
+#define MMP2_ICU_INT_ROUTE_PJ4_FIQ (1 << 6)
+
struct icu_chip_data {
int nr_irqs;
unsigned int virq_base;
@@ -190,7 +193,8 @@ static struct mmp_intc_conf mmp_conf = {
static struct mmp_intc_conf mmp2_conf = {
.conf_enable = 0x20,
.conf_disable = 0x0,
- .conf_mask = 0x7f,
+ .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+ MMP2_ICU_INT_ROUTE_PJ4_FIQ,
};
static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 58d15ed1203f4d858c339ea4d7dafa94bd2a56d3 ]
The size of the fixed part of the create response is 88 bytes not 56.
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2pdu.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index aacb15bd56fe..f087158c5555 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -82,8 +82,8 @@
#define NUMBER_OF_SMB2_COMMANDS 0x0013
-/* 4 len + 52 transform hdr + 64 hdr + 56 create rsp */
-#define MAX_SMB2_HDR_SIZE 0x00b0
+/* 52 transform hdr + 64 hdr + 88 create rsp */
+#define MAX_SMB2_HDR_SIZE 204
#define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit efad4e475c312456edb3c789d0996d12ed744c13 ]
Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.
Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1]. I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.
We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug:
initialize struct pages for the full memory section") merged and cause a
regression [2][3]. The reason is that there might be memory layouts
when two NUMA nodes share the same memory section so the merged fix is
simply incorrect.
In order to plug this hole we really have to be zone range aware in
those handlers. I have split up the original patch into two. One is
unchanged (patch 2) and I took a different approach for `removable'
crash.
[1] http://lkml.kernel.org/r/[email protected]
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948
[3] http://lkml.kernel.org/r/[email protected]
This patch (of 2):
Mikhail has reported the following VM_BUG_ON triggered when reading sysfs
removable state of a memory block:
page:000003d08300c000 is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
Call Trace:
is_mem_section_removable+0xb4/0x190
show_mem_removable+0x9a/0xd8
dev_attr_show+0x34/0x70
sysfs_kf_seq_show+0xc8/0x148
seq_read+0x204/0x480
__vfs_read+0x32/0x178
vfs_read+0x82/0x138
ksys_read+0x5a/0xb0
system_call+0xdc/0x2d8
Last Breaking-Event-Address:
is_mem_section_removable+0xb4/0x190
Kernel panic - not syncing: Fatal exception: panic_on_oops
The reason is that the memory block spans the zone boundary and we are
stumbling over an unitialized struct page. Fix this by enforcing zone
range in is_mem_section_removable so that we never run away from a zone.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Mikhail Zaslonko <[email protected]>
Debugged-by: Mikhail Zaslonko <[email protected]>
Tested-by: Gerald Schaefer <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memory_hotplug.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0addef5f8aa3..153acbf5f83d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1358,7 +1358,8 @@ static struct page *next_active_pageblock(struct page *page)
int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
{
struct page *page = pfn_to_page(start_pfn);
- struct page *end_page = page + nr_pages;
+ unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page)));
+ struct page *end_page = pfn_to_page(end_pfn);
/* Check the starting page of each pageblock within the range */
for (; page < end_page; page = next_active_pageblock(page)) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Clifton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/symbol-elf.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 7c97ecaeae48..2070c02de3af 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -74,6 +74,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym)
return GELF_ST_TYPE(sym->st_info);
}
+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym)
+{
+ return GELF_ST_VISIBILITY(sym->st_other);
+}
+
#ifndef STT_GNU_IFUNC
#define STT_GNU_IFUNC 10
#endif
@@ -98,7 +103,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym)
return elf_sym__type(sym) == STT_NOTYPE &&
sym->st_name != 0 &&
sym->st_shndx != SHN_UNDEF &&
- sym->st_shndx != SHN_ABS;
+ sym->st_shndx != SHN_ABS &&
+ elf_sym__visibility(sym) != STV_HIDDEN &&
+ elf_sym__visibility(sym) != STV_INTERNAL;
}
static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f585b283e3f025754c45bbe7533fc6e5c4643700 ]
In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.
Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/autofs4/inode.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 1132fe71b312..0fd472d67029 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -255,8 +255,10 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
}
root_inode = autofs4_get_inode(s, S_IFDIR | 0755);
root = d_make_root(root_inode);
- if (!root)
+ if (!root) {
+ ret = -ENOMEM;
goto fail_ino;
+ }
pipe = NULL;
root->d_fsdata = ino;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Szyprowski <[email protected]>
commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.
Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:
exynos_clkout_init: failed to register clkout clock
Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <[email protected]>
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos3250.dtsi | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -150,6 +150,9 @@
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
+ clock-names = "clkout8";
+ clocks = <&cmu CLK_FIN_PLL>;
+ #clock-cells = <1>;
};
mipi_phy: video-phy@10020710 {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 306b38305c0f86de7f17c5b091a95451dcc93d7d ]
Secondary CPU reset vector overlaps part of the double exception handler
code, resulting in weird crashes and hangups when running user code.
Move exception vectors one page up so that they don't clash with the
secondary CPU reset vector.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/configs/smp_lx200_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index 22eeacba37cc..199e05f85e89 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -35,6 +35,7 @@ CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
# CONFIG_PCI is not set
+CONFIG_VECTORS_OFFSET=0x00002000
CONFIG_XTENSA_PLATFORM_XTFPGA=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
This reverts commit 7212e37cbdf99f48e4a6c689a42f4bda1ae69001.
Hedi Berriche <[email protected]> notes:
> In 4.4-stable efi_runtime_lock as defined in drivers/firmware/efi/runtime-wrappers.c
> is a spinlock (given it predates commit dce48e351c0d) and commit
>
> f331e766c4be x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
>
> which 7212e37cbdf9 is a backport of, needs it to be a semaphore.
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/uv/bios.h | 8 +-------
arch/x86/platform/uv/bios_uv.c | 23 ++---------------------
drivers/firmware/efi/runtime-wrappers.c | 7 -------
3 files changed, 3 insertions(+), 35 deletions(-)
--- a/arch/x86/include/asm/uv/bios.h
+++ b/arch/x86/include/asm/uv/bios.h
@@ -48,8 +48,7 @@ enum {
BIOS_STATUS_SUCCESS = 0,
BIOS_STATUS_UNIMPLEMENTED = -ENOSYS,
BIOS_STATUS_EINVAL = -EINVAL,
- BIOS_STATUS_UNAVAIL = -EBUSY,
- BIOS_STATUS_ABORT = -EINTR,
+ BIOS_STATUS_UNAVAIL = -EBUSY
};
/*
@@ -112,9 +111,4 @@ extern long system_serial_number;
extern struct kobject *sgi_uv_kobj; /* /sys/firmware/sgi_uv */
-/*
- * EFI runtime lock; cf. firmware/efi/runtime-wrappers.c for details
- */
-extern struct semaphore __efi_uv_runtime_lock;
-
#endif /* _ASM_X86_UV_BIOS_H */
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -28,8 +28,7 @@
static struct uv_systab uv_systab;
-static s64 __uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
- u64 a4, u64 a5)
+s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
{
struct uv_systab *tab = &uv_systab;
s64 ret;
@@ -44,19 +43,6 @@ static s64 __uv_bios_call(enum uv_bios_c
a1, a2, a3, a4, a5);
return ret;
}
-
-s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
-{
- s64 ret;
-
- if (down_interruptible(&__efi_uv_runtime_lock))
- return BIOS_STATUS_ABORT;
-
- ret = __uv_bios_call(which, a1, a2, a3, a4, a5);
- up(&__efi_uv_runtime_lock);
-
- return ret;
-}
EXPORT_SYMBOL_GPL(uv_bios_call);
s64 uv_bios_call_irqsave(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
@@ -65,15 +51,10 @@ s64 uv_bios_call_irqsave(enum uv_bios_cm
unsigned long bios_flags;
s64 ret;
- if (down_interruptible(&__efi_uv_runtime_lock))
- return BIOS_STATUS_ABORT;
-
local_irq_save(bios_flags);
- ret = __uv_bios_call(which, a1, a2, a3, a4, a5);
+ ret = uv_bios_call(which, a1, a2, a3, a4, a5);
local_irq_restore(bios_flags);
- up(&__efi_uv_runtime_lock);
-
return ret;
}
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -88,13 +88,6 @@ static DEFINE_SPINLOCK(efi_runtime_lock)
*/
/*
- * Expose the EFI runtime lock to the UV platform
- */
-#ifdef CONFIG_X86_UV
-extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock);
-#endif
-
-/*
* As per commit ef68c8f87ed1 ("x86: Serialize EFI time accesses on rtc_lock"),
* the EFI specification requires that callers of the time related runtime
* functions serialize with other CMOS accesses in the kernel, as the EFI time
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit 87c11f1ddbbad38ad8bad47af133a8208985fbdf ]
Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.
Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].
Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.
[1]
[ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 157.460461] Call Trace:
[ 157.460486] dump_stack+0xf9/0x1be
[ 157.460553] check_preemption_disabled+0x1d6/0x200
[ 157.460576] ip6mr_forward2+0x73e/0x10e0
[ 157.460705] ip6_mr_forward+0x9a0/0x1510
[ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00
[ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0
[ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060
[ 157.462013] ipv6_setsockopt+0x90/0x110
[ 157.462036] rawv6_setsockopt+0x4a/0x120
[ 157.462058] __sys_setsockopt+0x16b/0x340
[ 157.462198] __x64_sys_setsockopt+0xbf/0x160
[ 157.462220] do_syscall_64+0x14d/0x610
[ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Amit Cohen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6mr.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1990,10 +1990,10 @@ int ip6mr_compat_ioctl(struct sock *sk,
static inline int ip6mr_forward2_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
- IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_OUTFORWDATAGRAMS);
- IP6_ADD_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_OUTOCTETS, skb->len);
+ IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS(net, ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTOCTETS, skb->len);
return dst_output(net, sk, skb);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ]
When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.
Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.
However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.
Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.
Cc: Boris Ostrovsky <[email protected]>
Suggested-by: Joerg Roedel <[email protected]>
Co-developed-by: Brijesh Singh <[email protected]>
Signed-off-by: Brijesh Singh <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Fixes: 6de8ad9b9ee0 ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 52c36394dba5..0ad8b7c78a43 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1982,6 +1982,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
static void do_detach(struct iommu_dev_data *dev_data)
{
+ struct protection_domain *domain = dev_data->domain;
struct amd_iommu *iommu;
u16 alias;
@@ -1997,10 +1998,6 @@ static void do_detach(struct iommu_dev_data *dev_data)
iommu = amd_iommu_rlookup_table[dev_data->devid];
alias = dev_data->alias;
- /* decrease reference counters */
- dev_data->domain->dev_iommu[iommu->index] -= 1;
- dev_data->domain->dev_cnt -= 1;
-
/* Update data structures */
dev_data->domain = NULL;
list_del(&dev_data->list);
@@ -2010,6 +2007,16 @@ static void do_detach(struct iommu_dev_data *dev_data)
/* Flush the DTE entry */
device_flush_dte(dev_data);
+
+ /* Flush IOTLB */
+ domain_flush_tlb_pde(domain);
+
+ /* Wait for the flushes to finish */
+ domain_flush_complete(domain);
+
+ /* decrease reference counters - needs to happen after the flushes */
+ domain->dev_iommu[iommu->index] -= 1;
+ domain->dev_cnt -= 1;
}
/*
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]
This patch fixes an issue in cpumap.c when used with the TOPOLOGY
header. In some configurations, some NUMA nodes may have no CPU (empty
cpulist). Yet a cpumap map must be created otherwise perf abort with an
error. This patch handles this case by creating a dummy map.
Before:
$ perf record -o - -e cycles noploop 2 | perf script -i -
0x6e8 [0x6c]: failed to process type: 80
After:
$ perf record -o - -e cycles noploop 2 | perf script -i -
noploop for 2 seconds
Signed-off-by: Stephane Eranian <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/cpumap.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 10af1e7524fb..f1aae86f7f6c 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -124,7 +124,12 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
if (!cpu_list)
return cpu_map__read_all_cpu_map();
- if (!isdigit(*cpu_list))
+ /*
+ * must handle the case of empty cpumap to cover
+ * TOPOLOGY header for NUMA nodes with no CPU
+ * ( e.g., because of CPU hotplug)
+ */
+ if (!isdigit(*cpu_list) && *cpu_list != '\0')
goto out;
while (isdigit(*cpu_list)) {
@@ -171,8 +176,10 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
if (nr_cpus > 0)
cpus = cpu_map__trim_new(nr_cpus, tmp_cpus);
- else
+ else if (*cpu_list != '\0')
cpus = cpu_map__default_new();
+ else
+ cpus = cpu_map__dummy_new();
invalid:
free(tmp_cpus);
out:
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]
autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry. However, dentry is read via autofs_dentry_ino(dentry) after
that. This may result in a use-free-bug. The patch drops the reference
count of dentry only when it is never used.
Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Ian Kent <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/autofs4/expire.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 7a5a598a2d94..0d8b9c4f27f2 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -560,7 +560,6 @@ int autofs4_expire_run(struct super_block *sb,
pkt.len = dentry->d_name.len;
memcpy(pkt.name, dentry->d_name.name, pkt.len);
pkt.name[pkt.len] = '\0';
- dput(dentry);
if ( copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)) )
ret = -EFAULT;
@@ -573,6 +572,8 @@ int autofs4_expire_run(struct super_block *sb,
complete_all(&ino->expire_complete);
spin_unlock(&sbi->fs_lock);
+ dput(dentry);
+
return ret;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c69c29a1a0a8f68cd87e98ba4a5a79fb8ef2a58c ]
If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 0cd3ecff768b..398b08e07149 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -535,8 +535,10 @@ static int rk_gmac_init(struct platform_device *pdev, void *priv)
int ret;
ret = phy_power_on(bsp_priv, true);
- if (ret)
+ if (ret) {
+ gmac_clk_enable(bsp_priv, false);
return ret;
+ }
ret = gmac_clk_enable(bsp_priv, true);
if (ret)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
[ Upstream commit 895a5e96dbd6386c8e78e5b78e067dcc67b7f0ab ]
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ .......
backtrace:
[<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
[<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
[<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
[<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
[<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
[<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
[<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
[<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
[<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
[<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000115be9bb>] 0xffffffffffffffff
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <[email protected]>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net-sysfs.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1361,6 +1361,9 @@ static int register_queue_kobjects(struc
error:
netdev_queue_update_kobjects(dev, txq, 0);
net_rx_queue_update_kobjects(dev, rxq, 0);
+#ifdef CONFIG_SYSFS
+ kset_unregister(dev->queues_kset);
+#endif
return error;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vincent Batts <[email protected]>
commit e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream.
Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.
Signed-off-by: Vincent Batts <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1241,6 +1241,7 @@ static const struct acpi_device_id elan_
{ "ELAN0000", 0 },
{ "ELAN0100", 0 },
{ "ELAN0600", 0 },
+ { "ELAN0601", 0 },
{ "ELAN0602", 0 },
{ "ELAN0605", 0 },
{ "ELAN0608", 0 },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]
In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.
[ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...
Abort any test if mapping failed.
Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dmatest.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 6796eb1a8a4c..884aecebb249 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -563,11 +563,9 @@ static int dmatest_func(void *data)
srcs[i] = um->addr[i] + src_off;
ret = dma_mapping_error(dev->dev, um->addr[i]);
if (ret) {
- dmaengine_unmap_put(um);
result("src mapping error", total_tests,
src_off, dst_off, len, ret);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
}
um->to_cnt++;
}
@@ -582,11 +580,9 @@ static int dmatest_func(void *data)
DMA_BIDIRECTIONAL);
ret = dma_mapping_error(dev->dev, dsts[i]);
if (ret) {
- dmaengine_unmap_put(um);
result("dst mapping error", total_tests,
src_off, dst_off, len, ret);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
}
um->bidi_cnt++;
}
@@ -611,12 +607,10 @@ static int dmatest_func(void *data)
}
if (!tx) {
- dmaengine_unmap_put(um);
result("prep error", total_tests, src_off,
dst_off, len, ret);
msleep(100);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
}
done->done = false;
@@ -625,12 +619,10 @@ static int dmatest_func(void *data)
cookie = tx->tx_submit(tx);
if (dma_submit_error(cookie)) {
- dmaengine_unmap_put(um);
result("submit error", total_tests, src_off,
dst_off, len, ret);
msleep(100);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
}
dma_async_issue_pending(chan);
@@ -643,16 +635,14 @@ static int dmatest_func(void *data)
dmaengine_unmap_put(um);
result("test timed out", total_tests, src_off, dst_off,
len, 0);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
} else if (status != DMA_COMPLETE) {
dmaengine_unmap_put(um);
result(status == DMA_ERROR ?
"completion error status" :
"completion busy status", total_tests, src_off,
dst_off, len, ret);
- failed_tests++;
- continue;
+ goto error_unmap_continue;
}
dmaengine_unmap_put(um);
@@ -691,6 +681,12 @@ static int dmatest_func(void *data)
verbose_result("test passed", total_tests, src_off,
dst_off, len, 0);
}
+
+ continue;
+
+error_unmap_continue:
+ dmaengine_unmap_put(um);
+ failed_tests++;
}
runtime = ktime_us_delta(ktime_get(), ktime);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
Not upstream as ncpfs is long deleted.
Fix up two strncpy build warnings in ncp_get_charsets() by using strscpy
and the max size of the array.
It's not like anyone uses this code anyway, and this gets rid of two
build warnings so that we can see real warnings as they pop up over
time.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ncpfs/ioctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -233,7 +233,7 @@ ncp_get_charsets(struct ncp_server* serv
len = strlen(server->nls_vol->charset);
if (len > NCP_IOCSNAME_LEN)
len = NCP_IOCSNAME_LEN;
- strncpy(user.codepage, server->nls_vol->charset, len);
+ strscpy(user.codepage, server->nls_vol->charset, NCP_IOCSNAME_LEN);
user.codepage[len] = 0;
}
@@ -243,7 +243,7 @@ ncp_get_charsets(struct ncp_server* serv
len = strlen(server->nls_io->charset);
if (len > NCP_IOCSNAME_LEN)
len = NCP_IOCSNAME_LEN;
- strncpy(user.iocharset, server->nls_io->charset, len);
+ strscpy(user.iocharset, server->nls_io->charset, NCP_IOCSNAME_LEN);
user.iocharset[len] = 0;
}
mutex_unlock(&server->root_setup_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.
Signed-off-by: Tomonori Sakita <[email protected]>
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 8b5ec9386f0f4..1544a7cc76ff8 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1409,7 +1409,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}
/* ask the core to calculate the divisor */
- baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);
spin_lock_irqsave(&sport->port.lock, flags);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiaxun Yang <[email protected]>
commit 0237199186e7a4aa5310741f0a6498a20c820fd7 upstream.
Some F17h models do not have CPB set in CPUID even though the CPU
supports it. Set the feature bit unconditionally on all F17h.
[ bp: Rewrite commit message and patch. ]
Signed-off-by: Jiaxun Yang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Sherry Hurwitz <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/amd.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -716,11 +716,9 @@ static void init_amd_bd(struct cpuinfo_x
static void init_amd_zn(struct cpuinfo_x86 *c)
{
set_cpu_cap(c, X86_FEATURE_ZEN);
- /*
- * Fix erratum 1076: CPB feature bit not being set in CPUID. It affects
- * all up to and including B1.
- */
- if (c->x86_model <= 1 && c->x86_mask <= 1)
+
+ /* Fix erratum 1076: CPB feature bit not being set in CPUID. */
+ if (!cpu_has(c, X86_FEATURE_CPB))
set_cpu_cap(c, X86_FEATURE_CPB);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Xiang <[email protected]>
commit 72faa7a773ca59336f3c889e878de81445c5a85c upstream.
The irq_pages is the number of pages for irq stack, but not the
order which is needed by __get_free_pages().
We can use get_order() to calculate the accurate order.
Signed-off-by: Liu Xiang <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Fixes: fe8bd18ffea5 ("MIPS: Introduce irq_stack")
Cc: [email protected]
Cc: [email protected] # v4.11+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/irq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -52,6 +52,7 @@ asmlinkage void spurious_interrupt(void)
void __init init_IRQ(void)
{
int i;
+ unsigned int order = get_order(IRQ_STACK_SIZE);
for (i = 0; i < NR_IRQS; i++)
irq_set_noprobe(i);
@@ -59,8 +60,7 @@ void __init init_IRQ(void)
arch_init_irq();
for_each_possible_cpu(i) {
- int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
- void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+ void *s = (void *)__get_free_pages(GFP_KERNEL, order);
irq_stack[i] = s;
pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rajasingh Thavamani <[email protected]>
[ Upstream commit 232ba3a51cc224b339c7114888ed7f0d4d95695e ]
With Micrel KSZ8061 PHY, the link may occasionally not come up after
Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
sheet 80000688A.pdf descripes the problem and possible workarounds in
detail, see below.
The batch implements workaround 1, which permanently fixes the issue.
DESCRIPTION
Link-up may not occur properly when the Ethernet cable is initially
connected. This issue occurs more commonly when the cable is connected
slowly, but it may occur any time a cable is connected. This issue occurs
in the auto-negotiation circuit, and will not occur if auto-negotiation
is disabled (which requires that the two link partners be set to the
same speed and duplex).
END USER IMPLICATIONS
When this issue occurs, link is not established. Subsequent cable
plug/unplaug cycle will not correct the issue.
WORk AROUND
There are four approaches to work around this issue:
1. This issue can be prevented by setting bit 15 in MMD device address 1,
register 2, prior to connecting the cable or prior to setting the
Restart Auto-negotiation bit in register 0h. The MMD registers are
accessed via the indirect access registers Dh and Eh, or via the Micrel
EthUtil utility as shown here:
. if using the EthUtil utility (usually with a Micrel KSZ8061
Evaluation Board), type the following commands:
> address 1
> mmd 1
> iw 2 b61a
. Alternatively, write the following registers to write to the
indirect MMD register:
Write register Dh, data 0001h
Write register Eh, data 0002h
Write register Dh, data 4001h
Write register Eh, data B61Ah
2. The issue can be avoided by disabling auto-negotiation in the KSZ8061,
either by the strapping option, or by clearing bit 12 in register 0h.
Care must be taken to ensure that the KSZ8061 and the link partner
will link with the same speed and duplex. Note that the KSZ8061
defaults to full-duplex when auto-negotiation is off, but other
devices may default to half-duplex in the event of failed
auto-negotiation.
3. The issue can be avoided by connecting the cable prior to powering-up
or resetting the KSZ8061, and leaving it plugged in thereafter.
4. If the above measures are not taken and the problem occurs, link can
be recovered by setting the Restart Auto-Negotiation bit in
register 0h, or by resetting or power cycling the device. Reset may
be either hardware reset or software reset (register 0h, bit 15).
PLAN
This errata will not be corrected in the future revision.
Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs")
Signed-off-by: Alexander Onnasch <[email protected]>
Signed-off-by: Rajasingh Thavamani <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/micrel.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -28,6 +28,7 @@
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/clk.h>
+#include <uapi/linux/mdio.h>
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
@@ -287,6 +288,17 @@ static int kszphy_config_init(struct phy
return 0;
}
+static int ksz8061_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+ if (ret)
+ return ret;
+
+ return kszphy_config_init(phydev);
+}
+
static int ksz9021_load_values_from_of(struct phy_device *phydev,
const struct device_node *of_node,
u16 reg,
@@ -771,7 +783,7 @@ static struct phy_driver ksphy_driver[]
.phy_id_mask = 0x00fffff0,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz8061_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
commit 971df15bd54ad46e907046ff33750a137b2f0096 upstream.
The standard return value for unsupported attribute names is
-EOPNOTSUPP, as opposed to undefined but supported attributes
(-ENODATA).
Also, fail for attribute names like "system.sockprotonameXXX" and
simplify the code a bit.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Al Viro <[email protected]>
[removes a build warning on 4.4.y - gregkh]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 24 ++++++------------------
1 file changed, 6 insertions(+), 18 deletions(-)
--- a/net/socket.c
+++ b/net/socket.c
@@ -470,27 +470,15 @@ static struct socket *sockfd_lookup_ligh
static ssize_t sockfs_getxattr(struct dentry *dentry,
const char *name, void *value, size_t size)
{
- const char *proto_name;
- size_t proto_size;
- int error;
-
- error = -ENODATA;
- if (!strncmp(name, XATTR_NAME_SOCKPROTONAME, XATTR_NAME_SOCKPROTONAME_LEN)) {
- proto_name = dentry->d_name.name;
- proto_size = strlen(proto_name);
-
+ if (!strcmp(name, XATTR_NAME_SOCKPROTONAME)) {
if (value) {
- error = -ERANGE;
- if (proto_size + 1 > size)
- goto out;
-
- strncpy(value, proto_name, proto_size + 1);
+ if (dentry->d_name.len + 1 > size)
+ return -ERANGE;
+ memcpy(value, dentry->d_name.name, dentry->d_name.len + 1);
}
- error = proto_size + 1;
+ return dentry->d_name.len + 1;
}
-
-out:
- return error;
+ return -EOPNOTSUPP;
}
static ssize_t sockfs_listxattr(struct dentry *dentry, char *buffer,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ]
| CC mm/nobootmem.o
|In file included from ./include/asm-generic/bug.h:18:0,
| from ./arch/arc/include/asm/bug.h:32,
| from ./include/linux/bug.h:5,
| from ./include/linux/mmdebug.h:5,
| from ./include/linux/gfp.h:5,
| from ./include/linux/slab.h:15,
| from mm/nobootmem.c:14:
|mm/nobootmem.c: In function '__free_pages_memory':
|./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast
| (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^
|./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck'
| (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
|./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp'
| __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
|./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp'
| #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
|mm/nobootmem.c:104:11: note: in expansion of macro 'min'
| order = min(MAX_ORDER - 1UL, __ffs(start));
Change __ffs return value from 'int' to 'unsigned long' as it
is done in other implementations (like asm-generic, x86, etc...)
to avoid build-time warnings in places where type is strictly
checked.
As __ffs may return values in [0-31] interval changing return
type to unsigned is valid.
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/include/asm/bitops.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 0352fb8d21b99..9623ae002f5b4 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -286,7 +286,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
{
if (!word)
return word;
@@ -346,9 +346,9 @@ static inline __attribute__ ((const)) int ffs(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
{
- int n;
+ unsigned long n;
asm volatile(
" ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 ]
On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.
Disable all GPIO interrupts before registering the GPIO IRQ chip.
Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <[email protected]>
Acked-by: Stefan Agner <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-vf610.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 87b950cec6ec..db95c4b99a74 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -227,6 +227,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
struct vf610_gpio_port *port;
struct resource *iores;
struct gpio_chip *gc;
+ int i;
int ret;
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
@@ -265,6 +266,10 @@ static int vf610_gpio_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
+ /* Mask all GPIO interrupts */
+ for (i = 0; i < gc->ngpio; i++)
+ vf610_gpio_writel(0, port->base + PORT_PCR(i));
+
/* Clear the interrupt status register for all GPIO's */
vf610_gpio_writel(~0, port->base + PORT_ISFR);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]
Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.
Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0
Fixing this by allowing TDLS setup request only when we have completed
association.
Signed-off-by: Balaji Pothunoori <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/cfg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 67348d8ac35da..7349bf26ae7b3 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1228,6 +1228,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
sta->sta.tdls = true;
+ if (sta->sta.tdls && sdata->vif.type == NL80211_IFTYPE_STATION &&
+ !sdata->u.mgd.associated)
+ return -EINVAL;
+
err = sta_apply_parameters(local, sta, params);
if (err) {
sta_info_free(local, sta);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8b1c42cdd7181200dc1fff39dcb6ac1a3fac2c25 ]
Otherwise it is impossible to enable CPUs after booting with 'maxcpus'
parameter.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 545144d1431d..0e34c1ed4aa8 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -80,7 +80,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned i;
- for (i = 0; i < max_cpus; ++i)
+ for_each_possible_cpu(i)
set_cpu_present(i, true);
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
[ Upstream commit 2b3c6885386020b1b9d92d45e8349637e27d1f66 ]
There have been reports of oversize UDP packets being sent to the
driver to be transmitted, causing error conditions. The issue is
likely caused by the dst of the SKB switching between 'lo' with
64K MTU and the hardware device with a smaller MTU. Patches are
being proposed by Mahesh Bandewar <[email protected]> to fix the
issue.
In the meantime, add a quick length check in the driver to prevent
the error. The driver uses the TX packet size as index to look up an
array to setup the TX BD. The array is large enough to support all MTU
sizes supported by the driver. The oversize TX packet causes the
driver to index beyond the array and put garbage values into the
TX BD. Add a simple check to prevent this.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -330,6 +330,12 @@ normal_tx:
}
length >>= 9;
+ if (unlikely(length >= ARRAY_SIZE(bnxt_lhint_arr))) {
+ dev_warn_ratelimited(&pdev->dev, "Dropped oversize %d bytes TX packet.\n",
+ skb->len);
+ i = 0;
+ goto tx_dma_error;
+ }
flags |= bnxt_lhint_arr[length];
txbd->tx_bd_len_flags_type = cpu_to_le32(flags);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 0fd3fd0a9bb0b02b6435bb7070e9f7b82a23f068 upstream.
The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service. Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry. The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.
Cc: [email protected]
Fixes: 5c056fdc5b47 ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
[[email protected]: backport to 4.4: extra arg, no CEPHX_V2]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ceph/messenger.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2049,15 +2049,19 @@ static int process_connect(struct ceph_c
dout("process_connect on %p tag %d\n", con, (int)con->in_tag);
if (con->auth_reply_buf) {
+ int len = le32_to_cpu(con->in_reply.authorizer_len);
+
/*
* Any connection that defines ->get_authorizer()
* should also define ->verify_authorizer_reply().
* See get_connect_authorizer().
*/
- ret = con->ops->verify_authorizer_reply(con, 0);
- if (ret < 0) {
- con->error_msg = "bad authorize reply";
- return ret;
+ if (len) {
+ ret = con->ops->verify_authorizer_reply(con, 0);
+ if (ret < 0) {
+ con->error_msg = "bad authorize reply";
+ return ret;
+ }
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]
Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: Chaitanya Tata <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 50dffd183cc63..429abf4219064 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -780,7 +780,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
* definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
* however it is safe for now to assume that a frequency rule should not be
* part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
* 60 GHz band.
* This resolution can be lowered and should be considered as we add
* regulatory rule support for other "bands".
@@ -795,7 +795,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
* with the Channel starting frequency above 45 GHz.
*/
u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
- 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+ 20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
return true;
if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit df28169e1538e4a8bcd8b779b043e5aa6524545c ]
The source_sink_alloc_func() function is supposed to return error
pointers on error. The function is called from usb_get_function() which
doesn't check for NULL returns so it would result in an Oops.
Of course, in the current kernel, small allocations always succeed so
this doesn't affect runtime.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_sourcesink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 67b2439899389..d7d095781be18 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -849,7 +849,7 @@ static struct usb_function *source_sink_alloc_func(
ss = kzalloc(sizeof(*ss), GFP_KERNEL);
if (!ss)
- return NULL;
+ return ERR_PTR(-ENOMEM);
ss_opts = container_of(fi, struct f_ss_opts, func_inst);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoffer Dall <[email protected]>
commit 83091db981e105d97562d3ed3ffe676e21927e3a upstream.
When the kernel was handling a guest MMIO read access internally, we
need to copy the emulation result into the run->mmio structure in order
for the kvm_handle_mmio_return() function to pick it up and inject the
result back into the guest.
Currently the only user of kvm_io_bus for ARM is the VGIC, which did
this copying itself, so this was not causing issues so far.
But with the upcoming new vgic implementation we need this done
properly.
Update the kvm_handle_mmio_return description and cleanup the code to
only perform a single copying when needed.
Code and commit message inspired by Andre Przywara.
Reported-by: Andre Przywara <[email protected]>
Signed-off-by: Christoffer Dall <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kvm/mmio.c | 11 ++++++-----
virt/kvm/arm/vgic.c | 7 -------
2 files changed, 6 insertions(+), 12 deletions(-)
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -87,11 +87,10 @@ static unsigned long mmio_read_buf(char
/**
* kvm_handle_mmio_return -- Handle MMIO loads after user space emulation
+ * or in-kernel IO emulation
+ *
* @vcpu: The VCPU pointer
* @run: The VCPU run struct containing the mmio data
- *
- * This should only be called after returning from userspace for MMIO load
- * emulation.
*/
int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
@@ -207,15 +206,17 @@ int io_mem_abort(struct kvm_vcpu *vcpu,
run->mmio.is_write = is_write;
run->mmio.phys_addr = fault_ipa;
run->mmio.len = len;
- if (is_write)
- memcpy(run->mmio.data, data_buf, len);
if (!ret) {
/* We handled the access successfully in the kernel. */
+ if (!is_write)
+ memcpy(run->mmio.data, data_buf, len);
kvm_handle_mmio_return(vcpu, run);
return 1;
}
+ if (is_write)
+ memcpy(run->mmio.data, data_buf, len);
run->exit_reason = KVM_EXIT_MMIO;
return 0;
}
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -821,7 +821,6 @@ static int vgic_handle_mmio_access(struc
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
struct vgic_io_device *iodev = container_of(this,
struct vgic_io_device, dev);
- struct kvm_run *run = vcpu->run;
const struct vgic_io_range *range;
struct kvm_exit_mmio mmio;
bool updated_state;
@@ -850,12 +849,6 @@ static int vgic_handle_mmio_access(struc
updated_state = false;
}
spin_unlock(&dist->lock);
- run->mmio.is_write = is_write;
- run->mmio.len = len;
- run->mmio.phys_addr = addr;
- memcpy(run->mmio.data, val, len);
-
- kvm_handle_mmio_return(vcpu, run);
if (updated_state)
vgic_kick_vcpus(vcpu->kvm);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]
Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that
different instances are uniquely identified. This is required in order
to support registering of multiple instances of same ti_am335x_tscadc IP.
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/ti_am335x_tscadc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 4a0f076c91ba0..faf8ce5be576f 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -279,8 +279,9 @@ static int ti_tscadc_probe(struct platform_device *pdev)
cell->pdata_size = sizeof(tscadc);
}
- err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
- tscadc->used_cells, NULL, 0, NULL);
+ err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+ tscadc->cells, tscadc->used_cells, NULL,
+ 0, NULL);
if (err < 0)
goto err_disable_clk;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]
This is required as part of the initialization sequence on certain SoCs.
If these registers are not initialized, the hardware can be unresponsive.
This fixes the driver on apq8060 (HP TouchPad device).
Signed-off-by: Jonathan Marek <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/qcom_rpm.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
index a867cc91657ef..27486f278201e 100644
--- a/drivers/mfd/qcom_rpm.c
+++ b/drivers/mfd/qcom_rpm.c
@@ -570,6 +570,10 @@ static int qcom_rpm_probe(struct platform_device *pdev)
return -EFAULT;
}
+ writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+ writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+ writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
fw_version[1],
fw_version[2]);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
commit 278e2148c07559dd4ad8602f22366d61eb2ee7b7 upstream.
This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list
when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net:
bridge: remove ipv6 zero address check in mcast queries")
The reason is RFC 4541 is not a standard but suggestive. Currently we
will elect 0.0.0.0 as Querier if there is no ip address configured on
bridge. If we do not add the port which recives query with source
0.0.0.0 to router list, the IGMP reports will not be about to forward
to Querier, IGMP data will also not be able to forward to dest.
As Nikolay suggested, revert this change first and add a boolopt api
to disable none-zero election in future if needed.
Reported-by: Linus Lüssing <[email protected]>
Reported-by: Sebastian Gottschall <[email protected]>
Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0")
Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries")
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1261,14 +1261,7 @@ static void br_multicast_query_received(
return;
br_multicast_update_query_timer(br, query, max_delay);
-
- /* Based on RFC4541, section 2.1.1 IGMP Forwarding Rules,
- * the arrival port for IGMP Queries where the source address
- * is 0.0.0.0 should not be added to router port list.
- */
- if ((saddr->proto == htons(ETH_P_IP) && saddr->u.ip4) ||
- saddr->proto == htons(ETH_P_IPV6))
- br_multicast_mark_router(br, port);
+ br_multicast_mark_router(br, port);
}
static int br_ip4_multicast_query(struct net_bridge *br,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]
In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero. For unicast frames
destined for other hosts, we stop processing the frame at that point.
For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA. That
doesn't match the usual definition of "dropped," so don't count
those as such.
With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.
Signed-off-by: Bob Copeland <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index acacceec8cd86..833ad779659c8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2340,7 +2340,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
skb_set_queue_mapping(skb, q);
if (!--mesh_hdr->ttl) {
- IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+ if (!is_multicast_ether_addr(hdr->addr1))
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh,
+ dropped_frames_ttl);
goto out;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 48396e80fb6526ea5ed267bd84f028bae56d2f9e upstream.
Since .scsi_done() must only be called after scsi_queue_rq() has
finished, make sure that the SRP initiator driver does not call
.scsi_done() while scsi_queue_rq() is in progress. Although
invoking sg_reset -d while I/O is in progress works fine with kernel
v4.20 and before, that is not the case with kernel v5.0-rc1. This
patch avoids that the following crash is triggered with kernel
v5.0-rc1:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000138
CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10
Call Trace:
blk_mq_sched_dispatch_requests+0x2f7/0x300
__blk_mq_run_hw_queue+0xd6/0x180
blk_mq_run_work_fn+0x27/0x30
process_one_work+0x4f1/0xa20
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Cc: <[email protected]>
Fixes: 94a9174c630c ("IB/srp: reduce lock coverage of command completion")
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/srp/ib_srp.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2594,7 +2594,6 @@ static int srp_reset_device(struct scsi_
{
struct srp_target_port *target = host_to_target(scmnd->device->host);
struct srp_rdma_ch *ch;
- int i, j;
u8 status;
shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n");
@@ -2606,15 +2605,6 @@ static int srp_reset_device(struct scsi_
if (status)
return FAILED;
- for (i = 0; i < target->ch_count; i++) {
- ch = &target->ch[i];
- for (j = 0; j < target->req_ring_size; ++j) {
- struct srp_request *req = &ch->req_ring[j];
-
- srp_finish_req(ch, req, scmnd->device, DID_RESET << 16);
- }
- }
-
return SUCCESS;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]
When building the kernel with Clang, the following section mismatch
warnings appear:
WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of init_prcm_registers is wrong.
WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of fw_project_name is wrong.
db8500_prcmu_probe should not be marked as __init so remove the __init
annotation from fw_project_name and init_prcm_registers.
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/db8500-prcmu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 12099b09a9a71..e71b9f23379d0 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2610,7 +2610,7 @@ static struct irq_chip prcmu_irq_chip = {
.irq_unmask = prcmu_irq_unmask,
};
-static __init char *fw_project_name(u32 project)
+static char *fw_project_name(u32 project)
{
switch (project) {
case PRCMU_FW_PROJECT_U8500:
@@ -2758,7 +2758,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
}
-static void __init init_prcm_registers(void)
+static void init_prcm_registers(void)
{
u32 val;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniele Palmas <[email protected]>
commit 6431866b6707d27151be381252d6eef13025cfce upstream.
This patch adds Telit ME910 family ECM composition 0x1102.
Signed-off-by: Daniele Palmas <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1147,6 +1147,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
.driver_info = NCTRL(0) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]
64bit JAZZ builds failed with
linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`:
/linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
[-Werror=implicit-function-declaration]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^~~~~~~~~
CKSEG1ADDR
/linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^
In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
from /linux-next/include/linux/compiler.h:248,
from /linux-next/include/linux/kernel.h:10,
from /linux-next/arch/mips/jazz/jazzdma.c:11:
/linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
pointer to integer of different size [-Werror=pointer-to-int-cast]
#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */
^
/linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
expansion of macro `_ACAST32_`
#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
^~~~~~~~~
/linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
macro `CPHYSADDR`
r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup
fixes this.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/jazz/jazzdma.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index db6f5afff4ff1..ea897912bc712 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -71,14 +71,15 @@ static int __init vdma_init(void)
get_order(VDMA_PGTBL_SIZE));
BUG_ON(!pgtbl);
dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
- pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+ pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
/*
* Clear the R4030 translation table
*/
vdma_pgtbl_init();
- r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+ r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+ CPHYSADDR((unsigned long)pgtbl));
r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eugeniy Paltsev <[email protected]>
commit 252f6e8eae909bc075a1b1e3b9efb095ae4c0b56 upstream.
It is currently done in arc_init_IRQ() which might be too late
considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned
memory accesses by default
Cc: [email protected] #4.4+
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
[vgupta: rewrote changelog]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/head.S | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -17,6 +17,7 @@
#include <asm/entry.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
+#include <asm/irqflags.h>
.macro CPU_EARLY_SETUP
@@ -47,6 +48,15 @@
sr r5, [ARC_REG_DC_CTRL]
1:
+
+#ifdef CONFIG_ISA_ARCV2
+ ; Unaligned access is disabled at reset, so re-enable early as
+ ; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
+ ; by default
+ lr r5, [status32]
+ bset r5, r5, STATUS_AD_BIT
+ kflag r5
+#endif
.endm
.section .init.text, "ax",@progbits
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 2fdeee2549231b1f989f011bb18191f5660d3745 ]
The current opt_inst_list operations inside team_nl_cmd_options_set()
is too complex to track:
LIST_HEAD(opt_inst_list);
nla_for_each_nested(...) {
list_for_each_entry(opt_inst, &team->option_inst_list, list) {
if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst))
continue;
list_add(&opt_inst->tmp_list, &opt_inst_list);
}
}
team_nl_send_event_options_get(team, &opt_inst_list);
as while we retrieve 'opt_inst' from team->option_inst_list, it could
be added to the local 'opt_inst_list' for multiple times. The
__team_option_inst_tmp_find() doesn't work, as the setter
team_mode_option_set() still calls team->ops.exit() which uses
->tmp_list too in __team_options_change_check().
Simplify the list operations by moving the 'opt_inst_list' and
team_nl_send_event_options_get() into the nla_for_each_nested() loop so
that it can be guranteed that we won't insert a same list entry for
multiple times. Therefore, __team_option_inst_tmp_find() can be removed
too.
Fixes: 4fb0534fb7bb ("team: avoid adding twice the same option to the event list")
Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message")
Reported-by: [email protected]
Reported-by: [email protected]
Cc: Jiri Pirko <[email protected]>
Cc: Paolo Abeni <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Reviewed-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/team/team.c | 27 +++++----------------------
1 file changed, 5 insertions(+), 22 deletions(-)
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -247,17 +247,6 @@ static void __team_option_inst_mark_remo
}
}
-static bool __team_option_inst_tmp_find(const struct list_head *opts,
- const struct team_option_inst *needle)
-{
- struct team_option_inst *opt_inst;
-
- list_for_each_entry(opt_inst, opts, tmp_list)
- if (opt_inst == needle)
- return true;
- return false;
-}
-
static int __team_options_register(struct team *team,
const struct team_option *option,
size_t option_count)
@@ -2447,7 +2436,6 @@ static int team_nl_cmd_options_set(struc
int err = 0;
int i;
struct nlattr *nl_option;
- LIST_HEAD(opt_inst_list);
team = team_nl_team_get(info);
if (!team)
@@ -2463,6 +2451,7 @@ static int team_nl_cmd_options_set(struc
struct nlattr *opt_attrs[TEAM_ATTR_OPTION_MAX + 1];
struct nlattr *attr;
struct nlattr *attr_data;
+ LIST_HEAD(opt_inst_list);
enum team_option_type opt_type;
int opt_port_ifindex = 0; /* != 0 for per-port options */
u32 opt_array_index = 0;
@@ -2566,23 +2555,17 @@ static int team_nl_cmd_options_set(struc
if (err)
goto team_put;
opt_inst->changed = true;
-
- /* dumb/evil user-space can send us duplicate opt,
- * keep only the last one
- */
- if (__team_option_inst_tmp_find(&opt_inst_list,
- opt_inst))
- continue;
-
list_add(&opt_inst->tmp_list, &opt_inst_list);
}
if (!opt_found) {
err = -ENOENT;
goto team_put;
}
- }
- err = team_nl_send_event_options_get(team, &opt_inst_list);
+ err = team_nl_send_event_options_get(team, &opt_inst_list);
+ if (err)
+ break;
+ }
team_put:
team_nl_team_put(team);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:
[134.189505] Unable to handle kernel paging request at virtual address
006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381] ESR = 0x96000004
[134.203487] Exception class = DABT (current EL), IL = 32 bits
[134.209497] SET = 0, FnV = 0
[134.212596] EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701] ISV = 0, ISS = 0x00000004
[134.222596] CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
OE 4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611] hns_ae_put_handle+0x38/0x60
[134.422208] hnae_put_handle+0xd4/0x108
[134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342] platform_drv_remove+0x2c/0x70
[134.445958] device_release_driver_internal+0x174/0x208
[134.454810] driver_detach+0x70/0xd8
[134.461913] bus_remove_driver+0x64/0xe8
[134.469396] driver_unregister+0x34/0x60
[134.476822] platform_driver_unregister+0x20/0x30
[134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634] __arm64_sys_delete_module+0x238/0x290
struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.
This patch frees vf_cb after hnae_handle used.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
index 1a16c0307b475..bd36fbe81ad2a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
@@ -188,12 +188,10 @@ static void hns_ae_put_handle(struct hnae_handle *handle)
struct hnae_vf_cb *vf_cb = hns_ae_get_vf_cb(handle);
int i;
- vf_cb->mac_cb = NULL;
-
- kfree(vf_cb);
-
for (i = 0; i < handle->q_num; i++)
hns_ae_get_ring_pair(handle->qs[i])->used_by_vf = 0;
+
+ kfree(vf_cb);
}
static void hns_ae_ring_enable_all(struct hnae_handle *handle, int val)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]
Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits. Fix this by shifting an
unsigned long.
Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/he.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 0f5cb37636bcc..010581e8bee05 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)
instead of '/ 512', use '>> 9' to prevent a call
to divdu3 on x86 platforms
*/
- rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
+ rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
if (rate_cps < 10)
rate_cps = 10; /* 2.2.1 minimum payload rate is 10 cps */
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ralph Campbell <[email protected]>
commit 050c17f239fd53adb55aa768d4f41bc76c0fe045 upstream.
The system call, get_mempolicy() [1], passes an unsigned long *nodemask
pointer and an unsigned long maxnode argument which specifies the length
of the user's nodemask array in bits (which is rounded up). The manual
page says that if the maxnode value is too small, get_mempolicy will
return EINVAL but there is no system call to return this minimum value.
To determine this value, some programs search /proc/<pid>/status for a
line starting with "Mems_allowed:" and use the number of digits in the
mask to determine the minimum value. A recent change to the way this line
is formatted [2] causes these programs to compute a value less than
MAX_NUMNODES so get_mempolicy() returns EINVAL.
Change get_mempolicy(), the older compat version of get_mempolicy(), and
the copy_nodes_to_user() function to use nr_node_ids instead of
MAX_NUMNODES, thus preserving the defacto method of computing the minimum
size for the nodemask array and the maxnode argument.
[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Signed-off-by: Ralph Campbell <[email protected]>
Suggested-by: Alexander Duyck <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mempolicy.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1295,7 +1295,7 @@ static int copy_nodes_to_user(unsigned l
nodemask_t *nodes)
{
unsigned long copy = ALIGN(maxnode-1, 64) / 8;
- const int nbytes = BITS_TO_LONGS(MAX_NUMNODES) * sizeof(long);
+ unsigned int nbytes = BITS_TO_LONGS(nr_node_ids) * sizeof(long);
if (copy > nbytes) {
if (copy > PAGE_SIZE)
@@ -1456,7 +1456,7 @@ SYSCALL_DEFINE5(get_mempolicy, int __use
int uninitialized_var(pval);
nodemask_t nodes;
- if (nmask != NULL && maxnode < MAX_NUMNODES)
+ if (nmask != NULL && maxnode < nr_node_ids)
return -EINVAL;
err = do_get_mempolicy(&pval, &nodes, addr, flags);
@@ -1485,7 +1485,7 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, in
unsigned long nr_bits, alloc_size;
DECLARE_BITMAP(bm, MAX_NUMNODES);
- nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES);
+ nr_bits = min_t(unsigned long, maxnode-1, nr_node_ids);
alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
if (nmask)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit e2477233145f2156434afb799583bccd878f3e9f upstream.
Fix boolean expressions by using logical AND operator '&&' instead of
bitwise operator '&'.
This issue was detected with the help of Coccinelle.
Fixes: 4fa084af28ca ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
[krzk: Fix -Wparentheses warning]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-s3c24xx/mach-osiris-dvs.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -70,16 +70,16 @@ static int osiris_dvs_notify(struct noti
switch (val) {
case CPUFREQ_PRECHANGE:
- if (old_dvs & !new_dvs ||
- cur_dvs & !new_dvs) {
+ if ((old_dvs && !new_dvs) ||
+ (cur_dvs && !new_dvs)) {
pr_debug("%s: exiting dvs\n", __func__);
cur_dvs = false;
gpio_set_value(OSIRIS_GPIO_DVS, 1);
}
break;
case CPUFREQ_POSTCHANGE:
- if (!old_dvs & new_dvs ||
- !cur_dvs & new_dvs) {
+ if ((!old_dvs && new_dvs) ||
+ (!cur_dvs && new_dvs)) {
pr_debug("entering dvs\n");
cur_dvs = true;
gpio_set_value(OSIRIS_GPIO_DVS, 0);
stable-rc/linux-4.4.y boot: 42 boots: 3 failed, 39 passed (v4.4.176-231-g6926dee23fa0)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.176-231-g6926dee23fa0/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.176-231-g6926dee23fa0/
Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.176-231-g6926dee23fa0
Git Commit: 6926dee23fa096361e7d170c7fa21a8b51eb7673
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 20 unique boards, 11 SoC families, 8 builds out of 190
Boot Regressions Detected:
arm:
multi_v7_defconfig:
gcc-7:
tegra124-nyan-big:
lab-collabora: failing since 24 days (last pass: v4.4.174-119-gf5fe3003919f - first fail: v4.4.176-30-ge577ed472fce)
tegra_defconfig:
gcc-7:
tegra124-nyan-big:
lab-collabora: failing since 24 days (last pass: v4.4.174-119-gf5fe3003919f - first fail: v4.4.176-30-ge577ed472fce)
Boot Failures Detected:
arm:
multi_v7_defconfig:
gcc-7:
tegra124-nyan-big: 1 failed lab
tegra_defconfig:
gcc-7:
tegra124-nyan-big: 1 failed lab
arm64:
defconfig:
gcc-7:
qcom-qdf2400: 1 failed lab
---
For more info write to <[email protected]>
On 3/22/19 4:12 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.177 release.
> There are 230 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:10:58 UTC 2019.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 292 pass: 292 fail: 0
Guenter
On Fri, 22 Mar 2019 at 16:57, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.4.177 release.
> There are 230 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:10:58 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.177-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.177-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 6926dee23fa096361e7d170c7fa21a8b51eb7673
git describe: v4.4.176-231-g6926dee23fa0
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.176-231-g6926dee23fa0
No regressions (compared to build v4.4.176)
No fixes (compared to build v4.4.176)
Ran 17857 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
Summary
------------------------------------------------------------------------
kernel: 4.4.177-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.177-rc1-hikey-20190322-403
git commit: aedc0057d8f3e9e59eea8f9ee59fa773bec7914b
git describe: 4.4.177-rc1-hikey-20190322-403
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.177-rc1-hikey-20190322-403
No regressions (compared to build 4.4.177-rc1-hikey-20190321-402)
No fixes (compared to build 4.4.177-rc1-hikey-20190321-402)
Ran 3000 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
--
Linaro LKFT
https://lkft.linaro.org
On 22/03/2019 11:12, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.177 release.
> There are 230 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:10:58 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.177-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Our daily builder has taken the weekend off unexpectedly and so I don't
have a test report for this branch yet (although I was able to pull some
reports for other branches) but I have given it a quick test myself and
see no issues.
Cheers
Jon
--
nvpublic