Remove unnecessary rf69_set_mode() function call when rx is waiting for
a telegram. There is waste to call rf69_set_mode() twice for becoming
standby mode.
Signed-off-by: Sidong Yang <[email protected]>
---
drivers/staging/pi433/pi433_if.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index 53928af696a6..e822f87fc533 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -650,21 +650,19 @@ pi433_tx_thread(void *data)
disable_irq(device->irq_num[DIO0]);
device->tx_active = true;
+ /* clear fifo, set fifo threshold, set payload length */
+ retval = rf69_set_mode(spi, standby); /* this clears the fifo */
+ if (retval < 0)
+ return retval;
+
if (device->rx_active && !rx_interrupted) {
/*
* rx is currently waiting for a telegram;
* we need to set the radio module to standby
*/
- retval = rf69_set_mode(device->spi, standby);
- if (retval < 0)
- return retval;
rx_interrupted = true;
}
- /* clear fifo, set fifo threshold, set payload length */
- retval = rf69_set_mode(spi, standby); /* this clears the fifo */
- if (retval < 0)
- return retval;
retval = rf69_set_fifo_threshold(spi, FIFO_THRESHOLD);
if (retval < 0)
return retval;
--
2.11.0