2019-03-24 15:14:14

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH v2 0/4] clk: meson8b: add the VPU clock tree

This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
The VPU clock tree is slightly different on all three SoCs. The details
are explained in patch #4.

Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
exists on Meson8m2 - Meson8 and Meson8b don't have it.
A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
compatible string which is already available) to account for this SoC
specific clock setup.

dependencies:
This series is meant to be applied on top of my other patch from [0]:
dt-bindings: clock: meson8b: drop the "ABP" clock definition

changes since v1 at [1]:
- fixed typo in the subject of patch #2 (spotted by Neil)
- collected Reviewed-by tags from Neil (thank you!)


[0] https://patchwork.kernel.org/patch/10860387/
[1] https://patchwork.kernel.org/cover/10860401/


Martin Blumenstingl (4):
dt-bindings: clock: meson8b: export the VPU clock
clk: meson: meson8b: use a separate clock table for Meson8m2
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: add the VPU clock trees

drivers/clk/meson/meson8b.c | 422 ++++++++++++++++++++++-
drivers/clk/meson/meson8b.h | 12 +-
include/dt-bindings/clock/meson8b-clkc.h | 1 +
3 files changed, 433 insertions(+), 2 deletions(-)

--
2.21.0



2019-03-24 15:13:05

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH v2 1/4] dt-bindings: clock: meson8b: export the VPU clock

The VPU clock is an input the the "VPU" (Video Processing Unit), which is
one of the components of the display controller.

Signed-off-by: Martin Blumenstingl <[email protected]>
---
include/dt-bindings/clock/meson8b-clkc.h | 1 +
1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
index cd11628f50f8..2ac9469a1c27 100644
--- a/include/dt-bindings/clock/meson8b-clkc.h
+++ b/include/dt-bindings/clock/meson8b-clkc.h
@@ -107,5 +107,6 @@
#define CLKID_PERIPH 126
#define CLKID_AXI 128
#define CLKID_L2_DRAM 130
+#define CLKID_VPU 190

#endif /* __MESON8B_CLKC_H */
--
2.21.0


2019-03-24 15:13:05

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH v2 3/4] clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2

Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which
is used as input for the VPU clocks.
The only supported frequency (based on Amlogic's vendor kernel sources)
is 364MHz which is achieved using the following parameters:
- input: XTAL (24MHz)
- M = 182
- N = 3
- OD = 2 ^ 2

Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
---
drivers/clk/meson/meson8b.c | 62 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 5 ++-
2 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index c9e6ec67d649..0d08f1ef7af8 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1703,6 +1703,64 @@ static struct clk_regmap meson8b_mali = {
},
};

+static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
+ PLL_PARAMS(182, 3),
+ { /* sentinel */ },
+};
+
+static struct clk_regmap meson8m2_gp_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = HHI_GP_PLL_CNTL,
+ .shift = 30,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = HHI_GP_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = HHI_GP_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_GP_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ .table = meson8m2_gp_pll_params_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gp_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap meson8m2_gp_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_GP_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gp_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "gp_pll_dco" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */

static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2338,6 +2396,8 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
[CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
[CLKID_MALI_1] = &meson8b_mali_1.hw,
[CLKID_MALI] = &meson8b_mali.hw,
+ [CLKID_GP_PLL_DCO] = &meson8m2_gp_pll_dco.hw,
+ [CLKID_GP_PLL] = &meson8m2_gp_pll.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2500,6 +2560,8 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_mali_1_div,
&meson8b_mali_1,
&meson8b_mali,
+ &meson8m2_gp_pll_dco,
+ &meson8m2_gp_pll,
};

static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index b8c58faeae52..a45f7102c558 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -19,6 +19,7 @@
*
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
+#define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
@@ -146,8 +147,10 @@
#define CLKID_MALI_1_SEL 178
#define CLKID_MALI_1_DIV 179
#define CLKID_MALI_1 180
+#define CLKID_GP_PLL_DCO 181
+#define CLKID_GP_PLL 182

-#define CLK_NR_CLKS 181
+#define CLK_NR_CLKS 183

/*
* include the CLKID and RESETID that have
--
2.21.0


2019-03-24 15:13:05

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH v2 4/4] clk: meson: meson8b: add the VPU clock trees

The VPU clock tree is slightly different on all three supported SoCs:

Meson8 only has an input mux (which chooses between "fclk_div4",
"fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate.

Meson8b has two VPU clock trees, each with an input mux (using the same
parents as the input mux on Meson8), divider and a gates. The final VPU
clock is a glitch-free mux which chooses between VPU_1 and VPU_2.

Meson8m2 uses a similar clock tree as Meson8b but the last input clock
is different: instead of using "fclk_div7" as input Meson8m2 uses
"gp_pll". This was probably done in hardware to improve the accuracy of
the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while
GP_PLL can achieve 364.0MHz.

Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
---
drivers/clk/meson/meson8b.c | 167 ++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 9 +-
2 files changed, 175 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 0d08f1ef7af8..8e091c2d10e6 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1761,6 +1761,147 @@ static struct clk_regmap meson8m2_gp_pll = {
},
};

+static const char * const mmeson8b_vpu_0_1_parent_names[] = {
+ "fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7"
+};
+
+static const char * const mmeson8m2_vpu_0_1_parent_names[] = {
+ "fclk_div4", "fclk_div3", "fclk_div5", "gp_pll"
+};
+
+static struct clk_regmap meson8b_vpu_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = mmeson8b_vpu_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8m2_vpu_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = mmeson8m2_vpu_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(mmeson8m2_vpu_0_1_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "vpu_0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vpu_0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = mmeson8b_vpu_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8m2_vpu_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = mmeson8m2_vpu_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(mmeson8m2_vpu_0_1_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "vpu_1_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vpu_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vpu_1_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_vpu = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VPU_CLK_CNTL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vpu",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "vpu_0", "vpu_1" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */

static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2024,6 +2165,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
[CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
[CLKID_MALI] = &meson8b_mali_0.hw,
+ [CLKID_VPU_0_SEL] = &meson8b_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &meson8b_vpu_0_div.hw,
+ [CLKID_VPU] = &meson8b_vpu_0.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2210,6 +2354,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
[CLKID_MALI_1] = &meson8b_mali_1.hw,
[CLKID_MALI] = &meson8b_mali.hw,
+ [CLKID_VPU_0_SEL] = &meson8b_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &meson8b_vpu_0_div.hw,
+ [CLKID_VPU_0] = &meson8b_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &meson8b_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &meson8b_vpu_1_div.hw,
+ [CLKID_VPU_1] = &meson8b_vpu_1.hw,
+ [CLKID_VPU] = &meson8b_vpu.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2398,6 +2549,13 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
[CLKID_MALI] = &meson8b_mali.hw,
[CLKID_GP_PLL_DCO] = &meson8m2_gp_pll_dco.hw,
[CLKID_GP_PLL] = &meson8m2_gp_pll.hw,
+ [CLKID_VPU_0_SEL] = &meson8m2_vpu_0_sel.hw,
+ [CLKID_VPU_0_DIV] = &meson8b_vpu_0_div.hw,
+ [CLKID_VPU_0] = &meson8b_vpu_0.hw,
+ [CLKID_VPU_1_SEL] = &meson8m2_vpu_1_sel.hw,
+ [CLKID_VPU_1_DIV] = &meson8b_vpu_1_div.hw,
+ [CLKID_VPU_1] = &meson8b_vpu_1.hw,
+ [CLKID_VPU] = &meson8b_vpu.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2562,6 +2720,15 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_mali,
&meson8m2_gp_pll_dco,
&meson8m2_gp_pll,
+ &meson8b_vpu_0_sel,
+ &meson8m2_vpu_0_sel,
+ &meson8b_vpu_0_div,
+ &meson8b_vpu_0,
+ &meson8b_vpu_1_sel,
+ &meson8m2_vpu_1_sel,
+ &meson8b_vpu_1_div,
+ &meson8b_vpu_1,
+ &meson8b_vpu,
};

static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index a45f7102c558..e775f91ccce9 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -35,6 +35,7 @@
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
+#define HHI_VPU_CLK_CNTL 0x1bc /* 0x6f offset in data sheet */
#define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 offset in data sheet */
#define HHI_NAND_CLK_CNTL 0x25c /* 0x97 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
@@ -149,8 +150,14 @@
#define CLKID_MALI_1 180
#define CLKID_GP_PLL_DCO 181
#define CLKID_GP_PLL 182
+#define CLKID_VPU_0_SEL 183
+#define CLKID_VPU_0_DIV 184
+#define CLKID_VPU_0 185
+#define CLKID_VPU_1_SEL 186
+#define CLKID_VPU_1_DIV 187
+#define CLKID_VPU_1 189

-#define CLK_NR_CLKS 183
+#define CLK_NR_CLKS 191

/*
* include the CLKID and RESETID that have
--
2.21.0


2019-03-24 15:13:05

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH v2 2/4] clk: meson: meson8b: use a separate clock table for Meson8m2

Meson8, Meson8b and Meson8m2 implement a similar clock controller.
However, there are a few differences between the three actual IP blocks.

One example where Meson8m2 differs from Meson8b is the VPU clock setup:
- the VPU input mux can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "fclk_div7" on Meson8b
- however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3",
"fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the
predecessor of the GP0_PLL clock on GXBB/GXL/GXM))

Add a separate clk_hw_onecell_data table for Meson8m2 so these
differences can be implemented in our clock controller driver. For now
meson8m2_hw_onecell_data is a clone of our existing
meson8b_hw_onecell_data.

Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
---
drivers/clk/meson/meson8b.c | 193 +++++++++++++++++++++++++++++++++++-
1 file changed, 192 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 576ad42252d0..c9e6ec67d649 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2157,6 +2157,192 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
.num = CLK_NR_CLKS,
};

+static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
+ .hws = {
+ [CLKID_XTAL] = &meson8b_xtal.hw,
+ [CLKID_PLL_FIXED] = &meson8b_fixed_pll.hw,
+ [CLKID_PLL_VID] = &meson8b_vid_pll.hw,
+ [CLKID_PLL_SYS] = &meson8b_sys_pll.hw,
+ [CLKID_FCLK_DIV2] = &meson8b_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &meson8b_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &meson8b_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &meson8b_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &meson8b_fclk_div7.hw,
+ [CLKID_CPUCLK] = &meson8b_cpu_clk.hw,
+ [CLKID_MPEG_SEL] = &meson8b_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &meson8b_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &meson8b_clk81.hw,
+ [CLKID_DDR] = &meson8b_ddr.hw,
+ [CLKID_DOS] = &meson8b_dos.hw,
+ [CLKID_ISA] = &meson8b_isa.hw,
+ [CLKID_PL301] = &meson8b_pl301.hw,
+ [CLKID_PERIPHS] = &meson8b_periphs.hw,
+ [CLKID_SPICC] = &meson8b_spicc.hw,
+ [CLKID_I2C] = &meson8b_i2c.hw,
+ [CLKID_SAR_ADC] = &meson8b_sar_adc.hw,
+ [CLKID_SMART_CARD] = &meson8b_smart_card.hw,
+ [CLKID_RNG0] = &meson8b_rng0.hw,
+ [CLKID_UART0] = &meson8b_uart0.hw,
+ [CLKID_SDHC] = &meson8b_sdhc.hw,
+ [CLKID_STREAM] = &meson8b_stream.hw,
+ [CLKID_ASYNC_FIFO] = &meson8b_async_fifo.hw,
+ [CLKID_SDIO] = &meson8b_sdio.hw,
+ [CLKID_ABUF] = &meson8b_abuf.hw,
+ [CLKID_HIU_IFACE] = &meson8b_hiu_iface.hw,
+ [CLKID_ASSIST_MISC] = &meson8b_assist_misc.hw,
+ [CLKID_SPI] = &meson8b_spi.hw,
+ [CLKID_I2S_SPDIF] = &meson8b_i2s_spdif.hw,
+ [CLKID_ETH] = &meson8b_eth.hw,
+ [CLKID_DEMUX] = &meson8b_demux.hw,
+ [CLKID_AIU_GLUE] = &meson8b_aiu_glue.hw,
+ [CLKID_IEC958] = &meson8b_iec958.hw,
+ [CLKID_I2S_OUT] = &meson8b_i2s_out.hw,
+ [CLKID_AMCLK] = &meson8b_amclk.hw,
+ [CLKID_AIFIFO2] = &meson8b_aififo2.hw,
+ [CLKID_MIXER] = &meson8b_mixer.hw,
+ [CLKID_MIXER_IFACE] = &meson8b_mixer_iface.hw,
+ [CLKID_ADC] = &meson8b_adc.hw,
+ [CLKID_BLKMV] = &meson8b_blkmv.hw,
+ [CLKID_AIU] = &meson8b_aiu.hw,
+ [CLKID_UART1] = &meson8b_uart1.hw,
+ [CLKID_G2D] = &meson8b_g2d.hw,
+ [CLKID_USB0] = &meson8b_usb0.hw,
+ [CLKID_USB1] = &meson8b_usb1.hw,
+ [CLKID_RESET] = &meson8b_reset.hw,
+ [CLKID_NAND] = &meson8b_nand.hw,
+ [CLKID_DOS_PARSER] = &meson8b_dos_parser.hw,
+ [CLKID_USB] = &meson8b_usb.hw,
+ [CLKID_VDIN1] = &meson8b_vdin1.hw,
+ [CLKID_AHB_ARB0] = &meson8b_ahb_arb0.hw,
+ [CLKID_EFUSE] = &meson8b_efuse.hw,
+ [CLKID_BOOT_ROM] = &meson8b_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &meson8b_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &meson8b_ahb_ctrl_bus.hw,
+ [CLKID_HDMI_INTR_SYNC] = &meson8b_hdmi_intr_sync.hw,
+ [CLKID_HDMI_PCLK] = &meson8b_hdmi_pclk.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &meson8b_usb1_ddr_bridge.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &meson8b_usb0_ddr_bridge.hw,
+ [CLKID_MMC_PCLK] = &meson8b_mmc_pclk.hw,
+ [CLKID_DVIN] = &meson8b_dvin.hw,
+ [CLKID_UART2] = &meson8b_uart2.hw,
+ [CLKID_SANA] = &meson8b_sana.hw,
+ [CLKID_VPU_INTR] = &meson8b_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &meson8b_sec_ahb_ahb3_bridge.hw,
+ [CLKID_CLK81_A9] = &meson8b_clk81_a9.hw,
+ [CLKID_VCLK2_VENCI0] = &meson8b_vclk2_venci0.hw,
+ [CLKID_VCLK2_VENCI1] = &meson8b_vclk2_venci1.hw,
+ [CLKID_VCLK2_VENCP0] = &meson8b_vclk2_vencp0.hw,
+ [CLKID_VCLK2_VENCP1] = &meson8b_vclk2_vencp1.hw,
+ [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw,
+ [CLKID_GCLK_VENCP_INT] = &meson8b_gclk_vencp_int.hw,
+ [CLKID_DAC_CLK] = &meson8b_dac_clk.hw,
+ [CLKID_AOCLK_GATE] = &meson8b_aoclk_gate.hw,
+ [CLKID_IEC958_GATE] = &meson8b_iec958_gate.hw,
+ [CLKID_ENC480P] = &meson8b_enc480p.hw,
+ [CLKID_RNG1] = &meson8b_rng1.hw,
+ [CLKID_GCLK_VENCL_INT] = &meson8b_gclk_vencl_int.hw,
+ [CLKID_VCLK2_VENCLMCC] = &meson8b_vclk2_venclmcc.hw,
+ [CLKID_VCLK2_VENCL] = &meson8b_vclk2_vencl.hw,
+ [CLKID_VCLK2_OTHER] = &meson8b_vclk2_other.hw,
+ [CLKID_EDP] = &meson8b_edp.hw,
+ [CLKID_AO_MEDIA_CPU] = &meson8b_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &meson8b_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &meson8b_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &meson8b_ao_iface.hw,
+ [CLKID_MPLL0] = &meson8b_mpll0.hw,
+ [CLKID_MPLL1] = &meson8b_mpll1.hw,
+ [CLKID_MPLL2] = &meson8b_mpll2.hw,
+ [CLKID_MPLL0_DIV] = &meson8b_mpll0_div.hw,
+ [CLKID_MPLL1_DIV] = &meson8b_mpll1_div.hw,
+ [CLKID_MPLL2_DIV] = &meson8b_mpll2_div.hw,
+ [CLKID_CPU_IN_SEL] = &meson8b_cpu_in_sel.hw,
+ [CLKID_CPU_IN_DIV2] = &meson8b_cpu_in_div2.hw,
+ [CLKID_CPU_IN_DIV3] = &meson8b_cpu_in_div3.hw,
+ [CLKID_CPU_SCALE_DIV] = &meson8b_cpu_scale_div.hw,
+ [CLKID_CPU_SCALE_OUT_SEL] = &meson8b_cpu_scale_out_sel.hw,
+ [CLKID_MPLL_PREDIV] = &meson8b_mpll_prediv.hw,
+ [CLKID_FCLK_DIV2_DIV] = &meson8b_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &meson8b_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV4_DIV] = &meson8b_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &meson8b_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &meson8b_fclk_div7_div.hw,
+ [CLKID_NAND_SEL] = &meson8b_nand_clk_sel.hw,
+ [CLKID_NAND_DIV] = &meson8b_nand_clk_div.hw,
+ [CLKID_NAND_CLK] = &meson8b_nand_clk_gate.hw,
+ [CLKID_PLL_FIXED_DCO] = &meson8b_fixed_pll_dco.hw,
+ [CLKID_HDMI_PLL_DCO] = &meson8b_hdmi_pll_dco.hw,
+ [CLKID_PLL_SYS_DCO] = &meson8b_sys_pll_dco.hw,
+ [CLKID_CPU_CLK_DIV2] = &meson8b_cpu_clk_div2.hw,
+ [CLKID_CPU_CLK_DIV3] = &meson8b_cpu_clk_div3.hw,
+ [CLKID_CPU_CLK_DIV4] = &meson8b_cpu_clk_div4.hw,
+ [CLKID_CPU_CLK_DIV5] = &meson8b_cpu_clk_div5.hw,
+ [CLKID_CPU_CLK_DIV6] = &meson8b_cpu_clk_div6.hw,
+ [CLKID_CPU_CLK_DIV7] = &meson8b_cpu_clk_div7.hw,
+ [CLKID_CPU_CLK_DIV8] = &meson8b_cpu_clk_div8.hw,
+ [CLKID_APB_SEL] = &meson8b_apb_clk_sel.hw,
+ [CLKID_APB] = &meson8b_apb_clk_gate.hw,
+ [CLKID_PERIPH_SEL] = &meson8b_periph_clk_sel.hw,
+ [CLKID_PERIPH] = &meson8b_periph_clk_gate.hw,
+ [CLKID_AXI_SEL] = &meson8b_axi_clk_sel.hw,
+ [CLKID_AXI] = &meson8b_axi_clk_gate.hw,
+ [CLKID_L2_DRAM_SEL] = &meson8b_l2_dram_clk_sel.hw,
+ [CLKID_L2_DRAM] = &meson8b_l2_dram_clk_gate.hw,
+ [CLKID_HDMI_PLL_LVDS_OUT] = &meson8b_hdmi_pll_lvds_out.hw,
+ [CLKID_HDMI_PLL_HDMI_OUT] = &meson8b_hdmi_pll_hdmi_out.hw,
+ [CLKID_VID_PLL_IN_SEL] = &meson8b_vid_pll_in_sel.hw,
+ [CLKID_VID_PLL_IN_EN] = &meson8b_vid_pll_in_en.hw,
+ [CLKID_VID_PLL_PRE_DIV] = &meson8b_vid_pll_pre_div.hw,
+ [CLKID_VID_PLL_POST_DIV] = &meson8b_vid_pll_post_div.hw,
+ [CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
+ [CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
+ [CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
+ [CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
+ [CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
+ [CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
+ [CLKID_VCLK_DIV4_DIV] = &meson8b_vclk_div4_div.hw,
+ [CLKID_VCLK_DIV4] = &meson8b_vclk_div4_div_gate.hw,
+ [CLKID_VCLK_DIV6_DIV] = &meson8b_vclk_div6_div.hw,
+ [CLKID_VCLK_DIV6] = &meson8b_vclk_div6_div_gate.hw,
+ [CLKID_VCLK_DIV12_DIV] = &meson8b_vclk_div12_div.hw,
+ [CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
+ [CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
+ [CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
+ [CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
+ [CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
+ [CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
+ [CLKID_VCLK2_DIV4_DIV] = &meson8b_vclk2_div4_div.hw,
+ [CLKID_VCLK2_DIV4] = &meson8b_vclk2_div4_div_gate.hw,
+ [CLKID_VCLK2_DIV6_DIV] = &meson8b_vclk2_div6_div.hw,
+ [CLKID_VCLK2_DIV6] = &meson8b_vclk2_div6_div_gate.hw,
+ [CLKID_VCLK2_DIV12_DIV] = &meson8b_vclk2_div12_div.hw,
+ [CLKID_VCLK2_DIV12] = &meson8b_vclk2_div12_div_gate.hw,
+ [CLKID_CTS_ENCT_SEL] = &meson8b_cts_enct_sel.hw,
+ [CLKID_CTS_ENCT] = &meson8b_cts_enct.hw,
+ [CLKID_CTS_ENCP_SEL] = &meson8b_cts_encp_sel.hw,
+ [CLKID_CTS_ENCP] = &meson8b_cts_encp.hw,
+ [CLKID_CTS_ENCI_SEL] = &meson8b_cts_enci_sel.hw,
+ [CLKID_CTS_ENCI] = &meson8b_cts_enci.hw,
+ [CLKID_HDMI_TX_PIXEL_SEL] = &meson8b_hdmi_tx_pixel_sel.hw,
+ [CLKID_HDMI_TX_PIXEL] = &meson8b_hdmi_tx_pixel.hw,
+ [CLKID_CTS_ENCL_SEL] = &meson8b_cts_encl_sel.hw,
+ [CLKID_CTS_ENCL] = &meson8b_cts_encl.hw,
+ [CLKID_CTS_VDAC0_SEL] = &meson8b_cts_vdac0_sel.hw,
+ [CLKID_CTS_VDAC0] = &meson8b_cts_vdac0.hw,
+ [CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
+ [CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
+ [CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
+ [CLKID_MALI_0] = &meson8b_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &meson8b_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
+ [CLKID_MALI_1] = &meson8b_mali_1.hw,
+ [CLKID_MALI] = &meson8b_mali.hw,
+ [CLK_NR_CLKS] = NULL,
+ },
+ .num = CLK_NR_CLKS,
+};
+
static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_clk81,
&meson8b_ddr,
@@ -2558,9 +2744,14 @@ static void __init meson8b_clkc_init(struct device_node *np)
return meson8b_clkc_init_common(np, &meson8b_hw_onecell_data);
}

+static void __init meson8m2_clkc_init(struct device_node *np)
+{
+ return meson8b_clkc_init_common(np, &meson8m2_hw_onecell_data);
+}
+
CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
meson8_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
meson8b_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
- meson8b_clkc_init);
+ meson8m2_clkc_init);
--
2.21.0


2019-03-25 09:55:51

by Jerome Brunet

[permalink] [raw]
Subject: Re: [PATCH v2 0/4] clk: meson8b: add the VPU clock tree

On Sun, 2019-03-24 at 16:11 +0100, Martin Blumenstingl wrote:
> This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
> The VPU clock tree is slightly different on all three SoCs. The details
> are explained in patch #4.
>
> Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
> exists on Meson8m2 - Meson8 and Meson8b don't have it.
> A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
> compatible string which is already available) to account for this SoC
> specific clock setup.
>
> dependencies:
> This series is meant to be applied on top of my other patch from [0]:
> dt-bindings: clock: meson8b: drop the "ABP" clock definition
>
> changes since v1 at [1]:
> - fixed typo in the subject of patch #2 (spotted by Neil)
> - collected Reviewed-by tags from Neil (thank you!)
>
>
> [0] https://patchwork.kernel.org/patch/10860387/
> [1] https://patchwork.kernel.org/cover/10860401/
>
>
> Martin Blumenstingl (4):
> dt-bindings: clock: meson8b: export the VPU clock
> clk: meson: meson8b: use a separate clock table for Meson8m2
> clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
> clk: meson: meson8b: add the VPU clock trees
>
> drivers/clk/meson/meson8b.c | 422 ++++++++++++++++++++++-
> drivers/clk/meson/meson8b.h | 12 +-
> include/dt-bindings/clock/meson8b-clkc.h | 1 +
> 3 files changed, 433 insertions(+), 2 deletions(-)
>

Looks sane.

Acked-by: Jerome Brunet <[email protected]>


2019-03-31 06:45:04

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH v2 1/4] dt-bindings: clock: meson8b: export the VPU clock

On Sun, 24 Mar 2019 16:11:01 +0100, Martin Blumenstingl wrote:
> The VPU clock is an input the the "VPU" (Video Processing Unit), which is
> one of the components of the display controller.
>
> Signed-off-by: Martin Blumenstingl <[email protected]>
> ---
> include/dt-bindings/clock/meson8b-clkc.h | 1 +
> 1 file changed, 1 insertion(+)
>

Reviewed-by: Rob Herring <[email protected]>


2019-04-01 08:41:20

by Neil Armstrong

[permalink] [raw]
Subject: Re: [PATCH v2 0/4] clk: meson8b: add the VPU clock tree

On 24/03/2019 16:11, Martin Blumenstingl wrote:
> This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
> The VPU clock tree is slightly different on all three SoCs. The details
> are explained in patch #4.
>
> Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
> exists on Meson8m2 - Meson8 and Meson8b don't have it.
> A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
> compatible string which is already available) to account for this SoC
> specific clock setup.
>
> dependencies:
> This series is meant to be applied on top of my other patch from [0]:
> dt-bindings: clock: meson8b: drop the "ABP" clock definition
>
> changes since v1 at [1]:
> - fixed typo in the subject of patch #2 (spotted by Neil)
> - collected Reviewed-by tags from Neil (thank you!)
>
>
> [0] https://patchwork.kernel.org/patch/10860387/
> [1] https://patchwork.kernel.org/cover/10860401/
>
>
> Martin Blumenstingl (4):
> dt-bindings: clock: meson8b: export the VPU clock
> clk: meson: meson8b: use a separate clock table for Meson8m2
> clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
> clk: meson: meson8b: add the VPU clock trees
>
> drivers/clk/meson/meson8b.c | 422 ++++++++++++++++++++++-
> drivers/clk/meson/meson8b.h | 12 +-
> include/dt-bindings/clock/meson8b-clkc.h | 1 +
> 3 files changed, 433 insertions(+), 2 deletions(-)
>

Applied [1] to next/headers the [2,3,4] to next/drivers for Linux 5.2-rc1