Hi Jerome,
can you please look at this small fix? I discovered that my Odroid-C1
wasn't booting anymore. My other Meson8m2 board was using fine.
While investigating this I found that it hangs while setting the
sys_pll_dco rate. This is important because unlike Odroid-C1 my
Meson8m2 board has a fixed regulator (and thus always runs at a
fixed CPU speed).
It always hanged while trying to set a CPU frequency of 312MHz. This
can be achieved with:
24MHz (xtal) * 52 (m) / 1 (n) / 4 (sys_pll)
However, my added debug logging showed that it was trying to set an
M value of 51, resulting in an output frequency of 306MHz. My debug
logs showed that meson_clk_get_pll_settings() considers 1248MHz
(which is the rate requested for sys_pll_dco for a CPU frequency of
312MHz) "worse" than 1224MHz.
I'm not sure exactly why the bug caused the board to hang, but my
patch fixes it.
Please apply this to v5.1-rc as I believe the Odroid-C1 on kernelci
also suffers from this issue.
Martin Blumenstingl (1):
clk: meson: pll: fix rounding and setting a rate that matches
precisely
drivers/clk/meson/clk-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--
2.21.0
Make meson_clk_pll_is_better() consider a rate that precisely matches
the requested rate to be better than any previous rate (which was
smaller than the current).
Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the
g12a") meson_clk_get_pll_settings() returned early (before calling
meson_clk_pll_is_better()) if the rate from the current iteration
matches the requested rate precisely. After this commit
meson_clk_pll_is_better() is called unconditionally. This requires
meson_clk_pll_is_better() to work with the case where "now == rate".
This fixes a hang during boot on Meson8b / Odroid-C1 for me.
Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <[email protected]>
---
drivers/clk/meson/clk-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 41e16dd7272a..7a14ac9b2fec 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -120,7 +120,7 @@ static bool meson_clk_pll_is_better(unsigned long rate,
return true;
} else {
/* Round down */
- if (now < rate && best < now)
+ if (now <= rate && best < now)
return true;
}
--
2.21.0
On Sun, 2019-03-24 at 17:43 +0100, Martin Blumenstingl wrote:
> Make meson_clk_pll_is_better() consider a rate that precisely matches
> the requested rate to be better than any previous rate (which was
> smaller than the current).
>
> Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the
> g12a") meson_clk_get_pll_settings() returned early (before calling
> meson_clk_pll_is_better()) if the rate from the current iteration
> matches the requested rate precisely. After this commit
> meson_clk_pll_is_better() is called unconditionally. This requires
> meson_clk_pll_is_better() to work with the case where "now == rate".
>
> This fixes a hang during boot on Meson8b / Odroid-C1 for me.
>
> Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a")
> Signed-off-by: Martin Blumenstingl <[email protected]>
Good catch !
Reviewed-by: Jerome Brunet <[email protected]>
On 25/03/2019 10:48, Jerome Brunet wrote:
> On Sun, 2019-03-24 at 17:43 +0100, Martin Blumenstingl wrote:
>> Make meson_clk_pll_is_better() consider a rate that precisely matches
>> the requested rate to be better than any previous rate (which was
>> smaller than the current).
>>
>> Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the
>> g12a") meson_clk_get_pll_settings() returned early (before calling
>> meson_clk_pll_is_better()) if the rate from the current iteration
>> matches the requested rate precisely. After this commit
>> meson_clk_pll_is_better() is called unconditionally. This requires
>> meson_clk_pll_is_better() to work with the case where "now == rate".
>>
>> This fixes a hang during boot on Meson8b / Odroid-C1 for me.
>>
>> Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a")
>> Signed-off-by: Martin Blumenstingl <[email protected]>
>
> Good catch !
>
> Reviewed-by: Jerome Brunet <[email protected]>
>
>
>
Applied to fixes/drivers !