Moved code to configure sync to where check enable_sync option before.
There is no need to check enable_sync twice. Configuring sync should be
executed immediately after enabling sync.
Signed-off-by: Sidong Yang <[email protected]>
---
v2: remove obvious comment. reordered size/value/enable sync functions.
drivers/staging/pi433/pi433_if.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index 53928af696a6..8fa7b3346170 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -319,6 +319,12 @@ rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
}
if (tx_cfg->enable_sync == OPTION_ON) {
+ ret = rf69_set_sync_size(dev->spi, tx_cfg->sync_length);
+ if (ret < 0)
+ return ret;
+ ret = rf69_set_sync_values(dev->spi, tx_cfg->sync_pattern);
+ if (ret < 0)
+ return ret;
ret = rf69_enable_sync(dev->spi);
if (ret < 0)
return ret;
@@ -348,16 +354,6 @@ rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
return ret;
}
- /* configure sync, if enabled */
- if (tx_cfg->enable_sync == OPTION_ON) {
- ret = rf69_set_sync_size(dev->spi, tx_cfg->sync_length);
- if (ret < 0)
- return ret;
- ret = rf69_set_sync_values(dev->spi, tx_cfg->sync_pattern);
- if (ret < 0)
- return ret;
- }
-
return 0;
}
--
2.17.1