This patch set proposes KUnit, a lightweight unit testing and mocking
framework for the Linux kernel.
Unlike Autotest and kselftest, KUnit is a true unit testing framework;
it does not require installing the kernel on a test machine or in a VM
and does not require tests to be written in userspace running on a host
kernel. Additionally, KUnit is fast: From invocation to completion KUnit
can run several dozen tests in under a second. Currently, the entire
KUnit test suite for KUnit runs in under a second from the initial
invocation (build time excluded).
KUnit is heavily inspired by JUnit, Python's unittest.mock, and
Googletest/Googlemock for C++. KUnit provides facilities for defining
unit test cases, grouping related test cases into test suites, providing
common infrastructure for running tests, mocking, spying, and much more.
## What's so special about unit testing?
A unit test is supposed to test a single unit of code in isolation,
hence the name. There should be no dependencies outside the control of
the test; this means no external dependencies, which makes tests orders
of magnitudes faster. Likewise, since there are no external dependencies,
there are no hoops to jump through to run the tests. Additionally, this
makes unit tests deterministic: a failing unit test always indicates a
problem. Finally, because unit tests necessarily have finer granularity,
they are able to test all code paths easily solving the classic problem
of difficulty in exercising error handling code.
## Is KUnit trying to replace other testing frameworks for the kernel?
No. Most existing tests for the Linux kernel are end-to-end tests, which
have their place. A well tested system has lots of unit tests, a
reasonable number of integration tests, and some end-to-end tests. KUnit
is just trying to address the unit test space which is currently not
being addressed.
## More information on KUnit
There is a bunch of documentation near the end of this patch set that
describes how to use KUnit and best practices for writing unit tests.
For convenience I am hosting the compiled docs here:
https://google.github.io/kunit-docs/third_party/kernel/docs/
Additionally for convenience, I have applied these patches to a branch:
https://kunit.googlesource.com/linux/+/kunit/rfc/v5.1-rc2/v1
The repo may be cloned with:
git clone https://kunit.googlesource.com/linux
This patchset is on the kunit/rfc/v5.1-rc2/v1 branch.
## Changes Since Last Version
Last version was RFC v4. It seemed we were pretty much done with the RFC
phase, so I started the numbering over again. Sorry if anyone finds that
confusing.
- Reduced usage of object oriented style of member functions as
suggested by Frank.
- Did a bunch of heavy clean up of the kunit_abort stuff as suggested
by Frank and Stephen:
- Biggest change was to reduce the usage of direct calls of member
functions.
- Added a better explanation of what abort is for and further
explained the rationale for KUNIT_ASSERT_* vs. KUNIT_EXPECT_*
- Dropped BUG() usage
- Also moved try_catch interface to a new file since it seemed
obscured by being mixed in with the code that used it.
- Fixed some other minor issues pointed out by Stephen.
- Updated email address of one of the contributors.
- Dropped DT unittest port since it seemed like there was a lot more
discussion to be had: it wasn't ready to leave the RFC phase.
Instead, I added a KUnit test written by Iurii for PROC SYSCTL that
was requested by Luis some time ago.
For reference, RFC v4 can be found here:
https://lkml.org/lkml/2019/2/14/1144
--
2.21.0.392.gf8f6787159e-goog
Add core facilities for defining unit tests; this provides a common way
to define test cases, functions that execute code which is under test
and determine whether the code under test behaves as expected; this also
provides a way to group together related test cases in test suites (here
we call them test_modules).
Just define test cases and how to execute them for now; setting
expectations on code will be defined later.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/test.h | 165 ++++++++++++++++++++++++++++++++++++++++++
kunit/Kconfig | 16 +++++
kunit/Makefile | 1 +
kunit/test.c | 168 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 350 insertions(+)
create mode 100644 include/kunit/test.h
create mode 100644 kunit/Kconfig
create mode 100644 kunit/Makefile
create mode 100644 kunit/test.c
diff --git a/include/kunit/test.h b/include/kunit/test.h
new file mode 100644
index 0000000000000..23c2ebedd6dd9
--- /dev/null
+++ b/include/kunit/test.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Base unit test (KUnit) API.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_TEST_H
+#define _KUNIT_TEST_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+
+struct kunit;
+
+/**
+ * struct kunit_case - represents an individual test case.
+ * @run_case: the function representing the actual test case.
+ * @name: the name of the test case.
+ *
+ * A test case is a function with the signature, ``void (*)(struct kunit *)``
+ * that makes expectations (see KUNIT_EXPECT_TRUE()) about code under test. Each
+ * test case is associated with a &struct kunit_module and will be run after the
+ * module's init function and followed by the module's exit function.
+ *
+ * A test case should be static and should only be created with the KUNIT_CASE()
+ * macro; additionally, every array of test cases should be terminated with an
+ * empty test case.
+ *
+ * Example:
+ *
+ * .. code-block:: c
+ *
+ * void add_test_basic(struct kunit *test)
+ * {
+ * KUNIT_EXPECT_EQ(test, 1, add(1, 0));
+ * KUNIT_EXPECT_EQ(test, 2, add(1, 1));
+ * KUNIT_EXPECT_EQ(test, 0, add(-1, 1));
+ * KUNIT_EXPECT_EQ(test, INT_MAX, add(0, INT_MAX));
+ * KUNIT_EXPECT_EQ(test, -1, add(INT_MAX, INT_MIN));
+ * }
+ *
+ * static struct kunit_case example_test_cases[] = {
+ * KUNIT_CASE(add_test_basic),
+ * {},
+ * };
+ *
+ */
+struct kunit_case {
+ void (*run_case)(struct kunit *test);
+ const char name[256];
+
+ /* private: internal use only. */
+ bool success;
+};
+
+/**
+ * KUNIT_CASE - A helper for creating a &struct kunit_case
+ * @test_name: a reference to a test case function.
+ *
+ * Takes a symbol for a function representing a test case and creates a
+ * &struct kunit_case object from it. See the documentation for
+ * &struct kunit_case for an example on how to use it.
+ */
+#define KUNIT_CASE(test_name) { .run_case = test_name, .name = #test_name }
+
+/**
+ * struct kunit_module - describes a related collection of &struct kunit_case s.
+ * @name: the name of the test. Purely informational.
+ * @init: called before every test case.
+ * @exit: called after every test case.
+ * @test_cases: a null terminated array of test cases.
+ *
+ * A kunit_module is a collection of related &struct kunit_case s, such that
+ * @init is called before every test case and @exit is called after every test
+ * case, similar to the notion of a *test fixture* or a *test class* in other
+ * unit testing frameworks like JUnit or Googletest.
+ *
+ * Every &struct kunit_case must be associated with a kunit_module for KUnit to
+ * run it.
+ */
+struct kunit_module {
+ const char name[256];
+ int (*init)(struct kunit *test);
+ void (*exit)(struct kunit *test);
+ struct kunit_case *test_cases;
+};
+
+/**
+ * struct kunit - represents a running instance of a test.
+ * @priv: for user to store arbitrary data. Commonly used to pass data created
+ * in the init function (see &struct kunit_module).
+ *
+ * Used to store information about the current context under which the test is
+ * running. Most of this data is private and should only be accessed indirectly
+ * via public functions; the one exception is @priv which can be used by the
+ * test writer to store arbitrary data.
+ */
+struct kunit {
+ void *priv;
+
+ /* private: internal use only. */
+ const char *name; /* Read only after initialization! */
+ spinlock_t lock; /* Gaurds all mutable test state. */
+ bool success; /* Protected by lock. */
+ void (*vprintk)(const struct kunit *test,
+ const char *level,
+ struct va_format *vaf);
+};
+
+int kunit_init_test(struct kunit *test, const char *name);
+
+int kunit_run_tests(struct kunit_module *module);
+
+/**
+ * module_test() - used to register a &struct kunit_module with KUnit.
+ * @module: a statically allocated &struct kunit_module.
+ *
+ * Registers @module with the test framework. See &struct kunit_module for more
+ * information.
+ */
+#define module_test(module) \
+ static int module_kunit_init##module(void) \
+ { \
+ return kunit_run_tests(&module); \
+ } \
+ late_initcall(module_kunit_init##module)
+
+void __printf(3, 4) kunit_printk(const char *level,
+ const struct kunit *test,
+ const char *fmt, ...);
+
+/**
+ * kunit_info() - Prints an INFO level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * Prints an info level message associated with the test module being run. Takes
+ * a variable number of format parameters just like printk().
+ */
+#define kunit_info(test, fmt, ...) \
+ kunit_printk(KERN_INFO, test, fmt, ##__VA_ARGS__)
+
+/**
+ * kunit_warn() - Prints a WARN level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * See kunit_info().
+ */
+#define kunit_warn(test, fmt, ...) \
+ kunit_printk(KERN_WARNING, test, fmt, ##__VA_ARGS__)
+
+/**
+ * kunit_err() - Prints an ERROR level message associated with the current test.
+ * @test: The test context object.
+ * @fmt: A printk() style format string.
+ *
+ * See kunit_info().
+ */
+#define kunit_err(test, fmt, ...) \
+ kunit_printk(KERN_ERR, test, fmt, ##__VA_ARGS__)
+
+#endif /* _KUNIT_TEST_H */
diff --git a/kunit/Kconfig b/kunit/Kconfig
new file mode 100644
index 0000000000000..64480092b2c24
--- /dev/null
+++ b/kunit/Kconfig
@@ -0,0 +1,16 @@
+#
+# KUnit base configuration
+#
+
+menu "KUnit support"
+
+config KUNIT
+ bool "Enable support for unit tests (KUnit)"
+ help
+ Enables support for kernel unit tests (KUnit), a lightweight unit
+ testing and mocking framework for the Linux kernel. These tests are
+ able to be run locally on a developer's workstation without a VM or
+ special hardware. For more information, please see
+ Documentation/kunit/
+
+endmenu
diff --git a/kunit/Makefile b/kunit/Makefile
new file mode 100644
index 0000000000000..5efdc4dea2c08
--- /dev/null
+++ b/kunit/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_KUNIT) += test.o
diff --git a/kunit/test.c b/kunit/test.c
new file mode 100644
index 0000000000000..5bf97e2935579
--- /dev/null
+++ b/kunit/test.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base unit test (KUnit) API.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <os.h>
+#include <kunit/test.h>
+
+static bool kunit_get_success(struct kunit *test)
+{
+ unsigned long flags;
+ bool success;
+
+ spin_lock_irqsave(&test->lock, flags);
+ success = test->success;
+ spin_unlock_irqrestore(&test->lock, flags);
+
+ return success;
+}
+
+static void kunit_set_success(struct kunit *test, bool success)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&test->lock, flags);
+ test->success = success;
+ spin_unlock_irqrestore(&test->lock, flags);
+}
+
+static int kunit_vprintk_emit(const struct kunit *test,
+ int level,
+ const char *fmt,
+ va_list args)
+{
+ return vprintk_emit(0, level, NULL, 0, fmt, args);
+}
+
+static int kunit_printk_emit(const struct kunit *test,
+ int level,
+ const char *fmt, ...)
+{
+ va_list args;
+ int ret;
+
+ va_start(args, fmt);
+ ret = kunit_vprintk_emit(test, level, fmt, args);
+ va_end(args);
+
+ return ret;
+}
+
+static void kunit_vprintk(const struct kunit *test,
+ const char *level,
+ struct va_format *vaf)
+{
+ kunit_printk_emit(test,
+ level[1] - '0',
+ "kunit %s: %pV", test->name, vaf);
+}
+
+int kunit_init_test(struct kunit *test, const char *name)
+{
+ spin_lock_init(&test->lock);
+ test->name = name;
+ test->vprintk = kunit_vprintk;
+
+ return 0;
+}
+
+/*
+ * Initializes and runs test case. Does not clean up or do post validations.
+ */
+static void kunit_run_case_internal(struct kunit *test,
+ struct kunit_module *module,
+ struct kunit_case *test_case)
+{
+ int ret;
+
+ if (module->init) {
+ ret = module->init(test);
+ if (ret) {
+ kunit_err(test, "failed to initialize: %d\n", ret);
+ kunit_set_success(test, false);
+ return;
+ }
+ }
+
+ test_case->run_case(test);
+}
+
+/*
+ * Performs post validations and cleanup after a test case was run.
+ * XXX: Should ONLY BE CALLED AFTER kunit_run_case_internal!
+ */
+static void kunit_run_case_cleanup(struct kunit *test,
+ struct kunit_module *module,
+ struct kunit_case *test_case)
+{
+ if (module->exit)
+ module->exit(test);
+}
+
+/*
+ * Performs all logic to run a test case.
+ */
+static bool kunit_run_case(struct kunit *test,
+ struct kunit_module *module,
+ struct kunit_case *test_case)
+{
+ kunit_set_success(test, true);
+
+ kunit_run_case_internal(test, module, test_case);
+ kunit_run_case_cleanup(test, module, test_case);
+
+ return kunit_get_success(test);
+}
+
+int kunit_run_tests(struct kunit_module *module)
+{
+ bool all_passed = true, success;
+ struct kunit_case *test_case;
+ struct kunit test;
+ int ret;
+
+ ret = kunit_init_test(&test, module->name);
+ if (ret)
+ return ret;
+
+ for (test_case = module->test_cases; test_case->run_case; test_case++) {
+ success = kunit_run_case(&test, module, test_case);
+ if (!success)
+ all_passed = false;
+
+ kunit_info(&test,
+ "%s %s\n",
+ test_case->name,
+ success ? "passed" : "failed");
+ }
+
+ if (all_passed)
+ kunit_info(&test, "all tests passed\n");
+ else
+ kunit_info(&test, "one or more tests failed\n");
+
+ return 0;
+}
+
+void kunit_printk(const char *level,
+ const struct kunit *test,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ test->vprintk(test, level, &vaf);
+
+ va_end(args);
+}
--
2.21.0.392.gf8f6787159e-goog
Create a common API for test managed resources like memory and test
objects. A lot of times a test will want to set up infrastructure to be
used in test cases; this could be anything from just wanting to allocate
some memory to setting up a driver stack; this defines facilities for
creating "test resources" which are managed by the test infrastructure
and are automatically cleaned up at the conclusion of the test.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/test.h | 109 +++++++++++++++++++++++++++++++++++++++++++
kunit/test.c | 95 +++++++++++++++++++++++++++++++++++++
2 files changed, 204 insertions(+)
diff --git a/include/kunit/test.h b/include/kunit/test.h
index 23c2ebedd6dd9..819edd8db4e81 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -12,6 +12,69 @@
#include <linux/types.h>
#include <linux/slab.h>
+struct kunit_resource;
+
+typedef int (*kunit_resource_init_t)(struct kunit_resource *, void *);
+typedef void (*kunit_resource_free_t)(struct kunit_resource *);
+
+/**
+ * struct kunit_resource - represents a *test managed resource*
+ * @allocation: for the user to store arbitrary data.
+ * @free: a user supplied function to free the resource. Populated by
+ * kunit_alloc_resource().
+ *
+ * Represents a *test managed resource*, a resource which will automatically be
+ * cleaned up at the end of a test case.
+ *
+ * Example:
+ *
+ * .. code-block:: c
+ *
+ * struct kunit_kmalloc_params {
+ * size_t size;
+ * gfp_t gfp;
+ * };
+ *
+ * static int kunit_kmalloc_init(struct kunit_resource *res, void *context)
+ * {
+ * struct kunit_kmalloc_params *params = context;
+ * res->allocation = kmalloc(params->size, params->gfp);
+ *
+ * if (!res->allocation)
+ * return -ENOMEM;
+ *
+ * return 0;
+ * }
+ *
+ * static void kunit_kmalloc_free(struct kunit_resource *res)
+ * {
+ * kfree(res->allocation);
+ * }
+ *
+ * void *kunit_kmalloc(struct kunit *test, size_t size, gfp_t gfp)
+ * {
+ * struct kunit_kmalloc_params params;
+ * struct kunit_resource *res;
+ *
+ * params.size = size;
+ * params.gfp = gfp;
+ *
+ * res = kunit_alloc_resource(test, kunit_kmalloc_init,
+ * kunit_kmalloc_free, ¶ms);
+ * if (res)
+ * return res->allocation;
+ * else
+ * return NULL;
+ * }
+ */
+struct kunit_resource {
+ void *allocation;
+ kunit_resource_free_t free;
+
+ /* private: internal use only. */
+ struct list_head node;
+};
+
struct kunit;
/**
@@ -104,6 +167,7 @@ struct kunit {
const char *name; /* Read only after initialization! */
spinlock_t lock; /* Gaurds all mutable test state. */
bool success; /* Protected by lock. */
+ struct list_head resources; /* Protected by lock. */
void (*vprintk)(const struct kunit *test,
const char *level,
struct va_format *vaf);
@@ -127,6 +191,51 @@ int kunit_run_tests(struct kunit_module *module);
} \
late_initcall(module_kunit_init##module)
+/**
+ * kunit_alloc_resource() - Allocates a *test managed resource*.
+ * @test: The test context object.
+ * @init: a user supplied function to initialize the resource.
+ * @free: a user supplied function to free the resource.
+ * @context: for the user to pass in arbitrary data to the init function.
+ *
+ * Allocates a *test managed resource*, a resource which will automatically be
+ * cleaned up at the end of a test case. See &struct kunit_resource for an
+ * example.
+ */
+struct kunit_resource *kunit_alloc_resource(struct kunit *test,
+ kunit_resource_init_t init,
+ kunit_resource_free_t free,
+ void *context);
+
+void kunit_free_resource(struct kunit *test, struct kunit_resource *res);
+
+/**
+ * kunit_kmalloc() - Like kmalloc() except the allocation is *test managed*.
+ * @test: The test context object.
+ * @size: The size in bytes of the desired memory.
+ * @gfp: flags passed to underlying kmalloc().
+ *
+ * Just like `kmalloc(...)`, except the allocation is managed by the test case
+ * and is automatically cleaned up after the test case concludes. See &struct
+ * kunit_resource for more information.
+ */
+void *kunit_kmalloc(struct kunit *test, size_t size, gfp_t gfp);
+
+/**
+ * kunit_kzalloc() - Just like kunit_kmalloc(), but zeroes the allocation.
+ * @test: The test context object.
+ * @size: The size in bytes of the desired memory.
+ * @gfp: flags passed to underlying kmalloc().
+ *
+ * See kzalloc() and kunit_kmalloc() for more information.
+ */
+static inline void *kunit_kzalloc(struct kunit *test, size_t size, gfp_t gfp)
+{
+ return kunit_kmalloc(test, size, gfp | __GFP_ZERO);
+}
+
+void kunit_cleanup(struct kunit *test);
+
void __printf(3, 4) kunit_printk(const char *level,
const struct kunit *test,
const char *fmt, ...);
diff --git a/kunit/test.c b/kunit/test.c
index 5bf97e2935579..541f9adb1608c 100644
--- a/kunit/test.c
+++ b/kunit/test.c
@@ -66,6 +66,7 @@ static void kunit_vprintk(const struct kunit *test,
int kunit_init_test(struct kunit *test, const char *name)
{
spin_lock_init(&test->lock);
+ INIT_LIST_HEAD(&test->resources);
test->name = name;
test->vprintk = kunit_vprintk;
@@ -93,6 +94,11 @@ static void kunit_run_case_internal(struct kunit *test,
test_case->run_case(test);
}
+static void kunit_case_internal_cleanup(struct kunit *test)
+{
+ kunit_cleanup(test);
+}
+
/*
* Performs post validations and cleanup after a test case was run.
* XXX: Should ONLY BE CALLED AFTER kunit_run_case_internal!
@@ -103,6 +109,8 @@ static void kunit_run_case_cleanup(struct kunit *test,
{
if (module->exit)
module->exit(test);
+
+ kunit_case_internal_cleanup(test);
}
/*
@@ -150,6 +158,93 @@ int kunit_run_tests(struct kunit_module *module)
return 0;
}
+struct kunit_resource *kunit_alloc_resource(struct kunit *test,
+ kunit_resource_init_t init,
+ kunit_resource_free_t free,
+ void *context)
+{
+ struct kunit_resource *res;
+ unsigned long flags;
+ int ret;
+
+ res = kzalloc(sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return NULL;
+
+ ret = init(res, context);
+ if (ret)
+ return NULL;
+
+ res->free = free;
+ spin_lock_irqsave(&test->lock, flags);
+ list_add_tail(&res->node, &test->resources);
+ spin_unlock_irqrestore(&test->lock, flags);
+
+ return res;
+}
+
+void kunit_free_resource(struct kunit *test, struct kunit_resource *res)
+{
+ res->free(res);
+ list_del(&res->node);
+ kfree(res);
+}
+
+struct kunit_kmalloc_params {
+ size_t size;
+ gfp_t gfp;
+};
+
+static int kunit_kmalloc_init(struct kunit_resource *res, void *context)
+{
+ struct kunit_kmalloc_params *params = context;
+
+ res->allocation = kmalloc(params->size, params->gfp);
+ if (!res->allocation)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void kunit_kmalloc_free(struct kunit_resource *res)
+{
+ kfree(res->allocation);
+}
+
+void *kunit_kmalloc(struct kunit *test, size_t size, gfp_t gfp)
+{
+ struct kunit_kmalloc_params params;
+ struct kunit_resource *res;
+
+ params.size = size;
+ params.gfp = gfp;
+
+ res = kunit_alloc_resource(test,
+ kunit_kmalloc_init,
+ kunit_kmalloc_free,
+ ¶ms);
+
+ if (res)
+ return res->allocation;
+ else
+ return NULL;
+}
+
+void kunit_cleanup(struct kunit *test)
+{
+ struct kunit_resource *resource, *resource_safe;
+ unsigned long flags;
+
+ spin_lock_irqsave(&test->lock, flags);
+ list_for_each_entry_safe(resource,
+ resource_safe,
+ &test->resources,
+ node) {
+ kunit_free_resource(test, resource);
+ }
+ spin_unlock_irqrestore(&test->lock, flags);
+}
+
void kunit_printk(const char *level,
const struct kunit *test,
const char *fmt, ...)
--
2.21.0.392.gf8f6787159e-goog
Add KUnit tests for the KUnit test abort mechanism (see preceding
commit). Add tests both for general try catch mechanism as well as
non-architecture specific mechanism.
Signed-off-by: Brendan Higgins <[email protected]>
---
kunit/Makefile | 3 +-
kunit/test-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 137 insertions(+), 1 deletion(-)
create mode 100644 kunit/test-test.c
diff --git a/kunit/Makefile b/kunit/Makefile
index 1f7680cfa11ad..533355867abd2 100644
--- a/kunit/Makefile
+++ b/kunit/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_KUNIT) += test.o \
kunit-stream.o \
try-catch.o
-obj-$(CONFIG_KUNIT_TEST) += string-stream-test.o
+obj-$(CONFIG_KUNIT_TEST) += test-test.o \
+ string-stream-test.o
obj-$(CONFIG_KUNIT_EXAMPLE_TEST) += example-test.o
diff --git a/kunit/test-test.c b/kunit/test-test.c
new file mode 100644
index 0000000000000..c81ae6efb959f
--- /dev/null
+++ b/kunit/test-test.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test for core test infrastructure.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+#include <kunit/test.h>
+
+struct kunit_try_catch_test_context {
+ struct kunit_try_catch *try_catch;
+ bool function_called;
+};
+
+void kunit_test_successful_try(void *data)
+{
+ struct kunit *test = data;
+ struct kunit_try_catch_test_context *ctx = test->priv;
+
+ ctx->function_called = true;
+}
+
+void kunit_test_no_catch(void *data)
+{
+ struct kunit *test = data;
+
+ KUNIT_FAIL(test, "Catch should not be called.\n");
+}
+
+static void kunit_test_try_catch_successful_try_no_catch(struct kunit *test)
+{
+ struct kunit_try_catch_test_context *ctx = test->priv;
+ struct kunit_try_catch *try_catch = ctx->try_catch;
+
+ kunit_try_catch_init(try_catch,
+ test,
+ kunit_test_successful_try,
+ kunit_test_no_catch);
+ kunit_try_catch_run(try_catch, test);
+
+ KUNIT_EXPECT_TRUE(test, ctx->function_called);
+}
+
+void kunit_test_unsuccessful_try(void *data)
+{
+ struct kunit *test = data;
+ struct kunit_try_catch_test_context *ctx = test->priv;
+ struct kunit_try_catch *try_catch = ctx->try_catch;
+
+ kunit_try_catch_throw(try_catch);
+ KUNIT_FAIL(test, "This line should never be reached.\n");
+}
+
+void kunit_test_catch(void *data)
+{
+ struct kunit *test = data;
+ struct kunit_try_catch_test_context *ctx = test->priv;
+
+ ctx->function_called = true;
+}
+
+static void kunit_test_try_catch_unsuccessful_try_does_catch(struct kunit *test)
+{
+ struct kunit_try_catch_test_context *ctx = test->priv;
+ struct kunit_try_catch *try_catch = ctx->try_catch;
+
+ kunit_try_catch_init(try_catch,
+ test,
+ kunit_test_unsuccessful_try,
+ kunit_test_catch);
+ kunit_try_catch_run(try_catch, test);
+
+ KUNIT_EXPECT_TRUE(test, ctx->function_called);
+}
+
+static void kunit_test_generic_try_catch_successful_try_no_catch(
+ struct kunit *test)
+{
+ struct kunit_try_catch_test_context *ctx = test->priv;
+ struct kunit_try_catch *try_catch = ctx->try_catch;
+
+ try_catch->test = test;
+ kunit_generic_try_catch_init(try_catch);
+ try_catch->try = kunit_test_successful_try;
+ try_catch->catch = kunit_test_no_catch;
+
+ kunit_try_catch_run(try_catch, test);
+
+ KUNIT_EXPECT_TRUE(test, ctx->function_called);
+}
+
+static void kunit_test_generic_try_catch_unsuccessful_try_does_catch(
+ struct kunit *test)
+{
+ struct kunit_try_catch_test_context *ctx = test->priv;
+ struct kunit_try_catch *try_catch = ctx->try_catch;
+
+ try_catch->test = test;
+ kunit_generic_try_catch_init(try_catch);
+ try_catch->try = kunit_test_unsuccessful_try;
+ try_catch->catch = kunit_test_catch;
+
+ kunit_try_catch_run(try_catch, test);
+
+ KUNIT_EXPECT_TRUE(test, ctx->function_called);
+}
+
+static int kunit_try_catch_test_init(struct kunit *test)
+{
+ struct kunit_try_catch_test_context *ctx;
+
+ ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ test->priv = ctx;
+
+ ctx->try_catch = kunit_kmalloc(test,
+ sizeof(*ctx->try_catch),
+ GFP_KERNEL);
+
+ return 0;
+}
+
+static struct kunit_case kunit_try_catch_test_cases[] = {
+ KUNIT_CASE(kunit_test_try_catch_successful_try_no_catch),
+ KUNIT_CASE(kunit_test_try_catch_unsuccessful_try_does_catch),
+ KUNIT_CASE(kunit_test_generic_try_catch_successful_try_no_catch),
+ KUNIT_CASE(kunit_test_generic_try_catch_unsuccessful_try_does_catch),
+ {},
+};
+
+static struct kunit_module kunit_try_catch_test_module = {
+ .name = "kunit-try-catch-test",
+ .init = kunit_try_catch_test_init,
+ .test_cases = kunit_try_catch_test_cases,
+};
+module_test(kunit_try_catch_test_module);
--
2.21.0.392.gf8f6787159e-goog
Add myself as maintainer of KUnit, the Linux kernel's unit testing
framework.
Signed-off-by: Brendan Higgins <[email protected]>
---
MAINTAINERS | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e5a5d263f299..fc2cedbd9b43e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8448,6 +8448,16 @@ S: Maintained
F: tools/testing/selftests/
F: Documentation/dev-tools/kselftest*
+KERNEL UNIT TESTING FRAMEWORK (KUnit)
+M: Brendan Higgins <[email protected]>
+L: [email protected]
+W: https://google.github.io/kunit-docs/third_party/kernel/docs/
+S: Maintained
+F: Documentation/kunit/
+F: include/kunit/
+F: kunit/
+F: tools/testing/kunit/
+
KERNEL USERMODE HELPER
M: Luis Chamberlain <[email protected]>
L: [email protected]
--
2.21.0.392.gf8f6787159e-goog
From: Iurii Zaikin <[email protected]>
KUnit tests for initialized data behavior of proc_dointvec that is
explicitly checked in the code. Includes basic parsing tests including
int min/max overflow.
Signed-off-by: Iurii Zaikin <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
---
kernel/Makefile | 2 +
kernel/sysctl-test.c | 292 +++++++++++++++++++++++++++++++++++++++++++
lib/Kconfig.debug | 6 +
3 files changed, 300 insertions(+)
create mode 100644 kernel/sysctl-test.c
diff --git a/kernel/Makefile b/kernel/Makefile
index 6c57e78817dad..c81a8976b6a4b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -112,6 +112,8 @@ obj-$(CONFIG_HAS_IOMEM) += iomem.o
obj-$(CONFIG_ZONE_DEVICE) += memremap.o
obj-$(CONFIG_RSEQ) += rseq.o
+obj-$(CONFIG_SYSCTL_KUNIT_TEST) += sysctl-test.o
+
obj-$(CONFIG_GCC_PLUGIN_STACKLEAK) += stackleak.o
KASAN_SANITIZE_stackleak.o := n
KCOV_INSTRUMENT_stackleak.o := n
diff --git a/kernel/sysctl-test.c b/kernel/sysctl-test.c
new file mode 100644
index 0000000000000..a0fba6b6fc2dc
--- /dev/null
+++ b/kernel/sysctl-test.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test of proc sysctl.
+ */
+
+#include <kunit/test.h>
+#include <linux/printk.h>
+#include <linux/sysctl.h>
+#include <linux/uaccess.h>
+
+static int i_zero;
+static int i_one_hundred = 100;
+
+struct test_sysctl_data {
+ int int_0001;
+ int int_0002;
+ int int_0003[4];
+
+ unsigned int uint_0001;
+
+ char string_0001[65];
+};
+
+static struct test_sysctl_data test_data = {
+ .int_0001 = 60,
+ .int_0002 = 1,
+
+ .int_0003[0] = 0,
+ .int_0003[1] = 1,
+ .int_0003[2] = 2,
+ .int_0003[3] = 3,
+
+ .uint_0001 = 314,
+
+ .string_0001 = "(none)",
+};
+
+static void sysctl_test_dointvec_null_tbl_data(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = NULL,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ void *buffer = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ size_t len;
+ loff_t pos;
+
+ len = 1234;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 0, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+ len = 1234;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 1, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+}
+
+static void sysctl_test_dointvec_table_maxlen_unset(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = 0,
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ void *buffer = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ size_t len;
+ loff_t pos;
+
+ len = 1234;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 0, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+ len = 1234;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 1, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+}
+
+static void sysctl_test_dointvec_table_len_is_zero(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ void *buffer = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ size_t len;
+ loff_t pos;
+
+ len = 0;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 0, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 1, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+}
+
+static void sysctl_test_dointvec_table_read_but_position_set(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ void *buffer = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ size_t len;
+ loff_t pos;
+
+ len = 1234;
+ pos = 1;
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 0, buffer, &len, &pos));
+ KUNIT_EXPECT_EQ(test, 0, len);
+}
+
+static void sysctl_test_dointvec_happy_single_positive(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ char input[] = "9";
+ size_t len = sizeof(input) - 1;
+ loff_t pos = 0;
+
+ table.data = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 1, input, &len, &pos));
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, len);
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, pos);
+ KUNIT_EXPECT_EQ(test, 9, *(int *)table.data);
+}
+
+static void sysctl_test_dointvec_happy_single_negative(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ char input[] = "-9";
+ size_t len = sizeof(input) - 1;
+ loff_t pos = 0;
+
+ table.data = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ KUNIT_EXPECT_EQ(test, 0, proc_dointvec(&table, 1, input, &len, &pos));
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, len);
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, pos);
+ KUNIT_EXPECT_EQ(test, -9, *(int *)table.data);
+}
+
+static void sysctl_test_dointvec_single_less_int_min(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ char input[32];
+ size_t len = sizeof(input) - 1;
+ loff_t pos = 0;
+ long less_than_min = (long)INT_MIN - 1;
+
+ KUNIT_EXPECT_LT(test, less_than_min, INT_MIN);
+ KUNIT_EXPECT_LT(test,
+ snprintf(input, sizeof(input), "%ld", less_than_min),
+ sizeof(input));
+
+ table.data = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ KUNIT_EXPECT_EQ(test, -EINVAL,
+ proc_dointvec(&table, 1, input, &len, &pos));
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, len);
+ KUNIT_EXPECT_EQ(test, 0, *(int *)table.data);
+}
+
+static void sysctl_test_dointvec_single_greater_int_max(struct kunit *test)
+{
+ struct ctl_table table = {
+ .procname = "foo",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ };
+ char input[32];
+ size_t len = sizeof(input) - 1;
+ loff_t pos = 0;
+ long greater_than_max = (long)INT_MAX + 1;
+
+ KUNIT_EXPECT_GT(test, greater_than_max, INT_MAX);
+ KUNIT_EXPECT_LT(test, snprintf(input, sizeof(input), "%ld",
+ greater_than_max),
+ sizeof(input));
+ table.data = kunit_kzalloc(test, sizeof(int), GFP_USER);
+ KUNIT_EXPECT_EQ(test, -EINVAL,
+ proc_dointvec(&table, 1, input, &len, &pos));
+ KUNIT_EXPECT_EQ(test, sizeof(input) - 1, len);
+ KUNIT_EXPECT_EQ(test, 0, *(int *)table.data);
+}
+
+static int sysctl_test_init(struct kunit *test)
+{
+ return 0;
+}
+
+/*
+ * This is run once after each test case, see the comment on example_test_module
+ * for more information.
+ */
+static void sysctl_test_exit(struct kunit *test)
+{
+}
+
+/*
+ * Here we make a list of all the test cases we want to add to the test module
+ * below.
+ */
+static struct kunit_case sysctl_test_cases[] = {
+ /*
+ * This is a helper to create a test case object from a test case
+ * function; its exact function is not important to understand how to
+ * use KUnit, just know that this is how you associate test cases with a
+ * test module.
+ */
+ KUNIT_CASE(sysctl_test_dointvec_null_tbl_data),
+ KUNIT_CASE(sysctl_test_dointvec_table_maxlen_unset),
+ KUNIT_CASE(sysctl_test_dointvec_table_len_is_zero),
+ KUNIT_CASE(sysctl_test_dointvec_table_read_but_position_set),
+ KUNIT_CASE(sysctl_test_dointvec_happy_single_positive),
+ KUNIT_CASE(sysctl_test_dointvec_happy_single_negative),
+ KUNIT_CASE(sysctl_test_dointvec_single_less_int_min),
+ KUNIT_CASE(sysctl_test_dointvec_single_greater_int_max),
+ {},
+};
+
+/*
+ * This defines a suite or grouping of tests.
+ *
+ * Test cases are defined as belonging to the suite by adding them to
+ * `test_cases`.
+ *
+ * Often it is desirable to run some function which will set up things which
+ * will be used by every test; this is accomplished with an `init` function
+ * which runs before each test case is invoked. Similarly, an `exit` function
+ * may be specified which runs after every test case and can be used to for
+ * cleanup. For clarity, running tests in a test module would behave as follows:
+ *
+ * module.init(test);
+ * module.test_case[0](test);
+ * module.exit(test);
+ * module.init(test);
+ * module.test_case[1](test);
+ * module.exit(test);
+ * ...;
+ */
+static struct kunit_module sysctl_test_module = {
+ .name = "sysctl_test",
+ .init = sysctl_test_init,
+ .exit = sysctl_test_exit,
+ .test_cases = sysctl_test_cases,
+};
+
+/*
+ * This registers the above test module telling KUnit that this is a suite of
+ * tests that need to be run.
+ */
+module_test(sysctl_test_module);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0d9e81779e373..c20fd8a12bb3f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1908,6 +1908,12 @@ config TEST_SYSCTL
If unsure, say N.
+config SYSCTL_KUNIT_TEST
+ bool "KUnit test for sysctl"
+ depends on KUNIT
+ help
+ Enables KUnit sysctl test.
+
config TEST_UDELAY
tristate "udelay test driver"
help
--
2.21.0.392.gf8f6787159e-goog
Add defconfig for UML and a fragment that can be used to configure other
architectures for building KUnit tests. Add option to kunit_tool to use
a defconfig to create the kunitconfig.
Signed-off-by: Brendan Higgins <[email protected]>
---
arch/um/configs/kunit_defconfig | 8 ++++++++
tools/testing/kunit/configs/all_tests.config | 8 ++++++++
tools/testing/kunit/kunit.py | 17 +++++++++++++++--
tools/testing/kunit/kunit_kernel.py | 3 ++-
4 files changed, 33 insertions(+), 3 deletions(-)
create mode 100644 arch/um/configs/kunit_defconfig
create mode 100644 tools/testing/kunit/configs/all_tests.config
diff --git a/arch/um/configs/kunit_defconfig b/arch/um/configs/kunit_defconfig
new file mode 100644
index 0000000000000..bfe49689038f1
--- /dev/null
+++ b/arch/um/configs/kunit_defconfig
@@ -0,0 +1,8 @@
+CONFIG_OF=y
+CONFIG_OF_UNITTEST=y
+CONFIG_OF_OVERLAY=y
+CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_KUNIT=y
+CONFIG_KUNIT_TEST=y
+CONFIG_KUNIT_EXAMPLE_TEST=y
diff --git a/tools/testing/kunit/configs/all_tests.config b/tools/testing/kunit/configs/all_tests.config
new file mode 100644
index 0000000000000..bfe49689038f1
--- /dev/null
+++ b/tools/testing/kunit/configs/all_tests.config
@@ -0,0 +1,8 @@
+CONFIG_OF=y
+CONFIG_OF_UNITTEST=y
+CONFIG_OF_OVERLAY=y
+CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_KUNIT=y
+CONFIG_KUNIT_TEST=y
+CONFIG_KUNIT_EXAMPLE_TEST=y
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index 7413ec7351a20..63e9fb3b60200 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -11,6 +11,7 @@ import argparse
import sys
import os
import time
+import shutil
import kunit_config
import kunit_kernel
@@ -36,14 +37,26 @@ parser.add_argument('--build_dir',
'directory.',
type=str, default=None, metavar='build_dir')
-cli_args = parser.parse_args()
+parser.add_argument('--defconfig',
+ help='Uses a default kunitconfig.',
+ action='store_true')
-linux = kunit_kernel.LinuxSourceTree()
+def create_default_kunitconfig():
+ if not os.path.exists(kunit_kernel.KUNITCONFIG_PATH):
+ shutil.copyfile('arch/um/configs/kunit_defconfig',
+ kunit_kernel.KUNITCONFIG_PATH)
+
+cli_args = parser.parse_args()
build_dir = None
if cli_args.build_dir:
build_dir = cli_args.build_dir
+if cli_args.defconfig:
+ create_default_kunitconfig()
+
+linux = kunit_kernel.LinuxSourceTree()
+
config_start = time.time()
success = linux.build_reconfig(build_dir)
config_end = time.time()
diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
index 07c0abf2f47df..bf38768353313 100644
--- a/tools/testing/kunit/kunit_kernel.py
+++ b/tools/testing/kunit/kunit_kernel.py
@@ -14,6 +14,7 @@ import os
import kunit_config
KCONFIG_PATH = '.config'
+KUNITCONFIG_PATH = 'kunitconfig'
class ConfigError(Exception):
"""Represents an error trying to configure the Linux kernel."""
@@ -81,7 +82,7 @@ class LinuxSourceTree(object):
def __init__(self):
self._kconfig = kunit_config.Kconfig()
- self._kconfig.read_from_file('kunitconfig')
+ self._kconfig.read_from_file(KUNITCONFIG_PATH)
self._ops = LinuxSourceTreeOperations()
def clean(self):
--
2.21.0.392.gf8f6787159e-goog
From: Avinash Kondareddy <[email protected]>
Tests how tests interact with test managed resources in their lifetime.
Signed-off-by: Avinash Kondareddy <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
---
kunit/test-test.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/kunit/test-test.c b/kunit/test-test.c
index 4bd7a34d0a6cb..54add8ca418a0 100644
--- a/kunit/test-test.c
+++ b/kunit/test-test.c
@@ -135,3 +135,125 @@ static struct kunit_module kunit_try_catch_test_module = {
.test_cases = kunit_try_catch_test_cases,
};
module_test(kunit_try_catch_test_module);
+
+/*
+ * Context for testing test managed resources
+ * is_resource_initialized is used to test arbitrary resources
+ */
+struct kunit_test_resource_context {
+ struct kunit test;
+ bool is_resource_initialized;
+};
+
+static int fake_resource_init(struct kunit_resource *res, void *context)
+{
+ struct kunit_test_resource_context *ctx = context;
+
+ res->allocation = &ctx->is_resource_initialized;
+ ctx->is_resource_initialized = true;
+ return 0;
+}
+
+static void fake_resource_free(struct kunit_resource *res)
+{
+ bool *is_resource_initialized = res->allocation;
+
+ *is_resource_initialized = false;
+}
+
+static void kunit_resource_test_init_resources(struct kunit *test)
+{
+ struct kunit_test_resource_context *ctx = test->priv;
+
+ kunit_init_test(&ctx->test, "testing_test_init_test");
+
+ KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static void kunit_resource_test_alloc_resource(struct kunit *test)
+{
+ struct kunit_test_resource_context *ctx = test->priv;
+ struct kunit_resource *res;
+ kunit_resource_free_t free = fake_resource_free;
+
+ res = kunit_alloc_resource(&ctx->test,
+ fake_resource_init,
+ fake_resource_free,
+ ctx);
+
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, res);
+ KUNIT_EXPECT_EQ(test, &ctx->is_resource_initialized, res->allocation);
+ KUNIT_EXPECT_TRUE(test, list_is_last(&res->node, &ctx->test.resources));
+ KUNIT_EXPECT_EQ(test, free, res->free);
+}
+
+static void kunit_resource_test_free_resource(struct kunit *test)
+{
+ struct kunit_test_resource_context *ctx = test->priv;
+ struct kunit_resource *res = kunit_alloc_resource(&ctx->test,
+ fake_resource_init,
+ fake_resource_free,
+ ctx);
+
+ kunit_free_resource(&ctx->test, res);
+
+ KUNIT_EXPECT_EQ(test, false, ctx->is_resource_initialized);
+ KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static void kunit_resource_test_cleanup_resources(struct kunit *test)
+{
+ int i;
+ struct kunit_test_resource_context *ctx = test->priv;
+ struct kunit_resource *resources[5];
+
+ for (i = 0; i < ARRAY_SIZE(resources); i++) {
+ resources[i] = kunit_alloc_resource(&ctx->test,
+ fake_resource_init,
+ fake_resource_free,
+ ctx);
+ }
+
+ kunit_cleanup(&ctx->test);
+
+ KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
+}
+
+static int kunit_resource_test_init(struct kunit *test)
+{
+ struct kunit_test_resource_context *ctx =
+ kzalloc(sizeof(*ctx), GFP_KERNEL);
+
+ if (!ctx)
+ return -ENOMEM;
+
+ test->priv = ctx;
+
+ kunit_init_test(&ctx->test, "test_test_context");
+
+ return 0;
+}
+
+static void kunit_resource_test_exit(struct kunit *test)
+{
+ struct kunit_test_resource_context *ctx = test->priv;
+
+ kunit_cleanup(&ctx->test);
+ kfree(ctx);
+}
+
+static struct kunit_case kunit_resource_test_cases[] = {
+ KUNIT_CASE(kunit_resource_test_init_resources),
+ KUNIT_CASE(kunit_resource_test_alloc_resource),
+ KUNIT_CASE(kunit_resource_test_free_resource),
+ KUNIT_CASE(kunit_resource_test_cleanup_resources),
+ {},
+};
+
+static struct kunit_module kunit_resource_test_module = {
+ .name = "kunit-resource-test",
+ .init = kunit_resource_test_init,
+ .exit = kunit_resource_test_exit,
+ .test_cases = kunit_resource_test_cases,
+};
+module_test(kunit_resource_test_module);
--
2.21.0.392.gf8f6787159e-goog
Add support for assertions which are like expectations except the test
terminates if the assertion is not satisfied.
The idea with assertions is that you use them to state all the
preconditions for your test. Logically speaking, these are the premises
of the test case, so if a premise isn't true, there is no point in
continuing the test case because there are no conclusions that can be
drawn without the premises. Whereas, the expectation is the thing you
are trying to prove. It is not used universally in x-unit style test
frameworks, but I really like it as a convention. You could still
express the idea of a premise using the above idiom, but I think
KUNIT_ASSERT_* states the intended idea perfectly.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/test.h | 401 ++++++++++++++++++++++++++++++++++++-
kunit/string-stream-test.c | 12 +-
kunit/test-test.c | 2 +
kunit/test.c | 33 +++
4 files changed, 439 insertions(+), 9 deletions(-)
diff --git a/include/kunit/test.h b/include/kunit/test.h
index 1b77caeb5d51f..bb2f3e63a3522 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -85,9 +85,10 @@ struct kunit;
* @name: the name of the test case.
*
* A test case is a function with the signature, ``void (*)(struct kunit *)``
- * that makes expectations (see KUNIT_EXPECT_TRUE()) about code under test. Each
- * test case is associated with a &struct kunit_module and will be run after the
- * module's init function and followed by the module's exit function.
+ * that makes expectations and assertions (see KUNIT_EXPECT_TRUE() and
+ * KUNIT_ASSERT_TRUE()) about code under test. Each test case is associated with
+ * a &struct kunit_module and will be run after the module's init function and
+ * followed by the module's exit function.
*
* A test case should be static and should only be created with the KUNIT_CASE()
* macro; additionally, every array of test cases should be terminated with an
@@ -705,4 +706,398 @@ static inline void kunit_expect_binary(struct kunit *test,
KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream); \
} while (0)
+static inline struct kunit_stream *kunit_assert_start(struct kunit *test,
+ const char *file,
+ const char *line)
+{
+ struct kunit_stream *stream = kunit_new_stream(test);
+
+ kunit_stream_add(stream, "ASSERTION FAILED at %s:%s\n\t", file, line);
+
+ return stream;
+}
+
+static inline void kunit_assert_end(struct kunit *test,
+ bool success,
+ struct kunit_stream *stream)
+{
+ if (!success) {
+ test->fail(test, stream);
+ test->abort(test);
+ } else {
+ kunit_stream_clear(stream);
+ }
+}
+
+#define KUNIT_ASSERT_START(test) \
+ kunit_assert_start(test, __FILE__, __stringify(__LINE__))
+
+#define KUNIT_ASSERT_END(test, success, stream) \
+ kunit_assert_end(test, success, stream)
+
+#define KUNIT_ASSERT(test, success, message) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ \
+ kunit_stream_add(__stream, message); \
+ KUNIT_ASSERT_END(test, success, __stream); \
+} while (0)
+
+#define KUNIT_ASSERT_MSG(test, success, message, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ \
+ kunit_stream_add(__stream, message); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ KUNIT_ASSERT_END(test, success, __stream); \
+} while (0)
+
+#define KUNIT_ASSERT_FAILURE(test, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ KUNIT_ASSERT_END(test, false, __stream); \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_TRUE() - Sets an assertion that @condition is true.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails and aborts when
+ * this does not evaluate to true.
+ *
+ * This and assertions of the form `KUNIT_ASSERT_*` will cause the test case to
+ * fail *and immediately abort* when the specified condition is not met. Unlike
+ * an expectation failure, it will prevent the test case from continuing to run;
+ * this is otherwise known as an *assertion failure*.
+ */
+#define KUNIT_ASSERT_TRUE(test, condition) \
+ KUNIT_ASSERT(test, (condition), \
+ "Asserted " #condition " is true, but is false.\n")
+
+#define KUNIT_ASSERT_TRUE_MSG(test, condition, fmt, ...) \
+ KUNIT_ASSERT_MSG(test, (condition), \
+ "Asserted " #condition " is true, but is false.\n",\
+ fmt, ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_FALSE() - Sets an assertion that @condition is false.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression.
+ *
+ * Sets an assertion that the value that @condition evaluates to is false. This
+ * is the same as KUNIT_EXPECT_FALSE(), except it causes an assertion failure
+ * (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_FALSE(test, condition) \
+ KUNIT_ASSERT(test, !(condition), \
+ "Asserted " #condition " is false, but is true.\n")
+
+#define KUNIT_ASSERT_FALSE_MSG(test, condition, fmt, ...) \
+ KUNIT_ASSERT_MSG(test, !(condition), \
+ "Asserted " #condition " is false, but is true.\n",\
+ fmt, ##__VA_ARGS__)
+
+void kunit_assert_binary_msg(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line,
+ const char *fmt, ...);
+
+static inline void kunit_assert_binary(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line)
+{
+ kunit_assert_binary_msg(test,
+ left, left_name,
+ right, right_name,
+ compare_result,
+ compare_name,
+ file,
+ line,
+ NULL);
+}
+
+/*
+ * A factory macro for defining the expectations for the basic comparisons
+ * defined for the built in types.
+ *
+ * Unfortunately, there is no common type that all types can be promoted to for
+ * which all the binary operators behave the same way as for the actual types
+ * (for example, there is no type that long long and unsigned long long can
+ * both be cast to where the comparison result is preserved for all values). So
+ * the best we can do is do the comparison in the original types and then coerce
+ * everything to long long for printing; this way, the comparison behaves
+ * correctly and the printed out value usually makes sense without
+ * interpretation, but can always be interpretted to figure out the actual
+ * value.
+ */
+#define KUNIT_ASSERT_BINARY(test, left, condition, right) do { \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ kunit_assert_binary(test, \
+ (long long) __left, #left, \
+ (long long) __right, #right, \
+ __left condition __right, #condition, \
+ __FILE__, __stringify(__LINE__)); \
+} while (0)
+
+#define KUNIT_ASSERT_BINARY_MSG(test, left, condition, right, fmt, ...) do { \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ kunit_assert_binary_msg(test, \
+ (long long) __left, #left, \
+ (long long) __right, #right, \
+ __left condition __right, #condition, \
+ __FILE__, __stringify(__LINE__), \
+ fmt, ##__VA_ARGS__); \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_EQ() - Sets an assertion that @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are
+ * equal. This is the same as KUNIT_EXPECT_EQ(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_EQ(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, ==, right)
+
+#define KUNIT_ASSERT_EQ_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ ==, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_NE() - An assertion that @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are not
+ * equal. This is the same as KUNIT_EXPECT_NE(), except it causes an assertion
+ * failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_NE(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, !=, right)
+
+#define KUNIT_ASSERT_NE_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ !=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_LT() - An assertion that @left is less than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is less than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_LT(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_LT(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, <, right)
+
+#define KUNIT_ASSERT_LT_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ <, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+/**
+ * KUNIT_ASSERT_LE() - An assertion that @left is less than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is less than or
+ * equal to the value that @right evaluates to. This is the same as
+ * KUNIT_EXPECT_LE(), except it causes an assertion failure (see
+ * KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_LE(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, <=, right)
+
+#define KUNIT_ASSERT_LE_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ <=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+/**
+ * KUNIT_ASSERT_GT() - An assertion that @left is greater than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is greater than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_GT(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_GT(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, >, right)
+
+#define KUNIT_ASSERT_GT_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ >, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_GE() - Assertion that @left is greater than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an assertion that the value that @left evaluates to is greater than the
+ * value that @right evaluates to. This is the same as KUNIT_EXPECT_GE(), except
+ * it causes an assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion
+ * is not met.
+ */
+#define KUNIT_ASSERT_GE(test, left, right) \
+ KUNIT_ASSERT_BINARY(test, left, >=, right)
+
+#define KUNIT_ASSERT_GE_MSG(test, left, right, fmt, ...) \
+ KUNIT_ASSERT_BINARY_MSG(test, \
+ left, \
+ >=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_ASSERT_STREQ() - An assertion that strings @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an assertion that the values that @left and @right evaluate to are
+ * equal. This is the same as KUNIT_EXPECT_STREQ(), except it causes an
+ * assertion failure (see KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_STREQ(test, left, right) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ \
+ KUNIT_ASSERT_END(test, !strcmp(left, right), __stream); \
+} while (0)
+
+#define KUNIT_ASSERT_STREQ_MSG(test, left, right, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ \
+ KUNIT_ASSERT_END(test, !strcmp(left, right), __stream); \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_STRNEQ() - Expects that strings @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * not equal. This is semantically equivalent to
+ * KUNIT_ASSERT_TRUE(@test, strcmp((@left), (@right))). See KUNIT_ASSERT_TRUE()
+ * for more information.
+ */
+#define KUNIT_ASSERT_STRNEQ(test, left, right) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ \
+ KUNIT_ASSERT_END(test, strcmp(left, right), __stream); \
+} while (0)
+
+#define KUNIT_ASSERT_STRNEQ_MSG(test, left, right, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Asserted " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ \
+ KUNIT_ASSERT_END(test, strcmp(left, right), __stream); \
+} while (0)
+
+/**
+ * KUNIT_ASSERT_NOT_ERR_OR_NULL() - Assertion that @ptr is not null and not err.
+ * @test: The test context object.
+ * @ptr: an arbitrary pointer.
+ *
+ * Sets an assertion that the value that @ptr evaluates to is not null and not
+ * an errno stored in a pointer. This is the same as
+ * KUNIT_EXPECT_NOT_ERR_OR_NULL(), except it causes an assertion failure (see
+ * KUNIT_ASSERT_TRUE()) when the assertion is not met.
+ */
+#define KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(ptr) __ptr = (ptr); \
+ \
+ if (!__ptr) \
+ kunit_stream_add(__stream, \
+ "Asserted " #ptr " is not null, but is.\n"); \
+ if (IS_ERR(__ptr)) \
+ kunit_stream_add(__stream, \
+ "Asserted " #ptr " is not error, but is: %ld\n",\
+ PTR_ERR(__ptr)); \
+ \
+ KUNIT_ASSERT_END(test, !IS_ERR_OR_NULL(__ptr), __stream); \
+} while (0)
+
+#define KUNIT_ASSERT_NOT_ERR_OR_NULL_MSG(test, ptr, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_ASSERT_START(test); \
+ typeof(ptr) __ptr = (ptr); \
+ \
+ if (!__ptr) { \
+ kunit_stream_add(__stream, \
+ "Asserted " #ptr " is not null, but is.\n"); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ } \
+ if (IS_ERR(__ptr)) { \
+ kunit_stream_add(__stream, \
+ "Asserted " #ptr " is not error, but is: %ld\n",\
+ PTR_ERR(__ptr)); \
+ \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ } \
+ KUNIT_ASSERT_END(test, !IS_ERR_OR_NULL(__ptr), __stream); \
+} while (0)
+
#endif /* _KUNIT_TEST_H */
diff --git a/kunit/string-stream-test.c b/kunit/string-stream-test.c
index b2a98576797c9..96819b99b5713 100644
--- a/kunit/string-stream-test.c
+++ b/kunit/string-stream-test.c
@@ -19,7 +19,7 @@ static void string_stream_test_get_string(struct kunit *test)
string_stream_add(stream, " %s", "bar");
output = string_stream_get_string(stream);
- KUNIT_EXPECT_STREQ(test, output, "Foo bar");
+ KUNIT_ASSERT_STREQ(test, output, "Foo bar");
kfree(output);
destroy_string_stream(stream);
}
@@ -34,16 +34,16 @@ static void string_stream_test_add_and_clear(struct kunit *test)
string_stream_add(stream, "A");
output = string_stream_get_string(stream);
- KUNIT_EXPECT_STREQ(test, output, "AAAAAAAAAA");
- KUNIT_EXPECT_EQ(test, stream->length, 10);
- KUNIT_EXPECT_FALSE(test, string_stream_is_empty(stream));
+ KUNIT_ASSERT_STREQ(test, output, "AAAAAAAAAA");
+ KUNIT_ASSERT_EQ(test, stream->length, 10);
+ KUNIT_ASSERT_FALSE(test, string_stream_is_empty(stream));
kfree(output);
string_stream_clear(stream);
output = string_stream_get_string(stream);
- KUNIT_EXPECT_STREQ(test, output, "");
- KUNIT_EXPECT_TRUE(test, string_stream_is_empty(stream));
+ KUNIT_ASSERT_STREQ(test, output, "");
+ KUNIT_ASSERT_TRUE(test, string_stream_is_empty(stream));
destroy_string_stream(stream);
}
diff --git a/kunit/test-test.c b/kunit/test-test.c
index c81ae6efb959f..4bd7a34d0a6cb 100644
--- a/kunit/test-test.c
+++ b/kunit/test-test.c
@@ -110,11 +110,13 @@ static int kunit_try_catch_test_init(struct kunit *test)
struct kunit_try_catch_test_context *ctx;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
test->priv = ctx;
ctx->try_catch = kunit_kmalloc(test,
sizeof(*ctx->try_catch),
GFP_KERNEL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->try_catch);
return 0;
}
diff --git a/kunit/test.c b/kunit/test.c
index 5eace2a527a4e..55561eadc459d 100644
--- a/kunit/test.c
+++ b/kunit/test.c
@@ -425,3 +425,36 @@ void kunit_expect_binary_msg(struct kunit *test,
kunit_expect_end(test, compare_result, stream);
}
+void kunit_assert_binary_msg(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line,
+ const char *fmt, ...)
+{
+ struct kunit_stream *stream = kunit_assert_start(test, file, line);
+ struct va_format vaf;
+ va_list args;
+
+ kunit_stream_add(stream,
+ "Asserted %s %s %s, but\n",
+ left_name, compare_name, right_name);
+ kunit_stream_add(stream, "\t\t%s == %lld\n", left_name, left);
+ kunit_stream_add(stream, "\t\t%s == %lld\n", right_name, right);
+
+ if (fmt) {
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ kunit_stream_add(stream, "\n%pV", &vaf);
+
+ va_end(args);
+ }
+
+ kunit_assert_end(test, compare_result, stream);
+}
+
--
2.21.0.392.gf8f6787159e-goog
Add a test for string stream along with a simpler example.
Signed-off-by: Brendan Higgins <[email protected]>
---
kunit/Kconfig | 12 ++++++
kunit/Makefile | 4 ++
kunit/example-test.c | 88 ++++++++++++++++++++++++++++++++++++++
kunit/string-stream-test.c | 61 ++++++++++++++++++++++++++
4 files changed, 165 insertions(+)
create mode 100644 kunit/example-test.c
create mode 100644 kunit/string-stream-test.c
diff --git a/kunit/Kconfig b/kunit/Kconfig
index 64480092b2c24..5cb500355c873 100644
--- a/kunit/Kconfig
+++ b/kunit/Kconfig
@@ -13,4 +13,16 @@ config KUNIT
special hardware. For more information, please see
Documentation/kunit/
+config KUNIT_TEST
+ bool "KUnit test for KUnit"
+ depends on KUNIT
+ help
+ Enables KUnit test to test KUnit.
+
+config KUNIT_EXAMPLE_TEST
+ bool "Example test for KUnit"
+ depends on KUNIT
+ help
+ Enables example KUnit test to demo features of KUnit.
+
endmenu
diff --git a/kunit/Makefile b/kunit/Makefile
index 6ddc622ee6b1c..60a9ea6cb4697 100644
--- a/kunit/Makefile
+++ b/kunit/Makefile
@@ -1,3 +1,7 @@
obj-$(CONFIG_KUNIT) += test.o \
string-stream.o \
kunit-stream.o
+
+obj-$(CONFIG_KUNIT_TEST) += string-stream-test.o
+
+obj-$(CONFIG_KUNIT_EXAMPLE_TEST) += example-test.o
diff --git a/kunit/example-test.c b/kunit/example-test.c
new file mode 100644
index 0000000000000..3947dd7c8f922
--- /dev/null
+++ b/kunit/example-test.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Example KUnit test to show how to use KUnit.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <kunit/test.h>
+
+/*
+ * This is the most fundamental element of KUnit, the test case. A test case
+ * makes a set EXPECTATIONs and ASSERTIONs about the behavior of some code; if
+ * any expectations or assertions are not met, the test fails; otherwise, the
+ * test passes.
+ *
+ * In KUnit, a test case is just a function with the signature
+ * `void (*)(struct kunit *)`. `struct kunit` is a context object that stores
+ * information about the current test.
+ */
+static void example_simple_test(struct kunit *test)
+{
+ /*
+ * This is an EXPECTATION; it is how KUnit tests things. When you want
+ * to test a piece of code, you set some expectations about what the
+ * code should do. KUnit then runs the test and verifies that the code's
+ * behavior matched what was expected.
+ */
+ KUNIT_EXPECT_EQ(test, 1 + 1, 2);
+}
+
+/*
+ * This is run once before each test case, see the comment on
+ * example_test_module for more information.
+ */
+static int example_test_init(struct kunit *test)
+{
+ kunit_info(test, "initializing\n");
+
+ return 0;
+}
+
+/*
+ * Here we make a list of all the test cases we want to add to the test module
+ * below.
+ */
+static struct kunit_case example_test_cases[] = {
+ /*
+ * This is a helper to create a test case object from a test case
+ * function; its exact function is not important to understand how to
+ * use KUnit, just know that this is how you associate test cases with a
+ * test module.
+ */
+ KUNIT_CASE(example_simple_test),
+ {},
+};
+
+/*
+ * This defines a suite or grouping of tests.
+ *
+ * Test cases are defined as belonging to the suite by adding them to
+ * `kunit_cases`.
+ *
+ * Often it is desirable to run some function which will set up things which
+ * will be used by every test; this is accomplished with an `init` function
+ * which runs before each test case is invoked. Similarly, an `exit` function
+ * may be specified which runs after every test case and can be used to for
+ * cleanup. For clarity, running tests in a test module would behave as follows:
+ *
+ * module.init(test);
+ * module.test_case[0](test);
+ * module.exit(test);
+ * module.init(test);
+ * module.test_case[1](test);
+ * module.exit(test);
+ * ...;
+ */
+static struct kunit_module example_test_module = {
+ .name = "example",
+ .init = example_test_init,
+ .test_cases = example_test_cases,
+};
+
+/*
+ * This registers the above test module telling KUnit that this is a suite of
+ * tests that need to be run.
+ */
+module_test(example_test_module);
diff --git a/kunit/string-stream-test.c b/kunit/string-stream-test.c
new file mode 100644
index 0000000000000..b2a98576797c9
--- /dev/null
+++ b/kunit/string-stream-test.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit test for struct string_stream.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <linux/slab.h>
+#include <kunit/test.h>
+#include <kunit/string-stream.h>
+
+static void string_stream_test_get_string(struct kunit *test)
+{
+ struct string_stream *stream = new_string_stream();
+ char *output;
+
+ string_stream_add(stream, "Foo");
+ string_stream_add(stream, " %s", "bar");
+
+ output = string_stream_get_string(stream);
+ KUNIT_EXPECT_STREQ(test, output, "Foo bar");
+ kfree(output);
+ destroy_string_stream(stream);
+}
+
+static void string_stream_test_add_and_clear(struct kunit *test)
+{
+ struct string_stream *stream = new_string_stream();
+ char *output;
+ int i;
+
+ for (i = 0; i < 10; i++)
+ string_stream_add(stream, "A");
+
+ output = string_stream_get_string(stream);
+ KUNIT_EXPECT_STREQ(test, output, "AAAAAAAAAA");
+ KUNIT_EXPECT_EQ(test, stream->length, 10);
+ KUNIT_EXPECT_FALSE(test, string_stream_is_empty(stream));
+ kfree(output);
+
+ string_stream_clear(stream);
+
+ output = string_stream_get_string(stream);
+ KUNIT_EXPECT_STREQ(test, output, "");
+ KUNIT_EXPECT_TRUE(test, string_stream_is_empty(stream));
+ destroy_string_stream(stream);
+}
+
+static struct kunit_case string_stream_test_cases[] = {
+ KUNIT_CASE(string_stream_test_get_string),
+ KUNIT_CASE(string_stream_test_add_and_clear),
+ {}
+};
+
+static struct kunit_module string_stream_test_module = {
+ .name = "string-stream-test",
+ .test_cases = string_stream_test_cases
+};
+module_test(string_stream_test_module);
+
--
2.21.0.392.gf8f6787159e-goog
From: Felix Guo <[email protected]>
The ultimate goal is to create minimal isolated test binaries; in the
meantime we are using UML to provide the infrastructure to run tests, so
define an abstract way to configure and run tests that allow us to
change the context in which tests are built without affecting the user.
This also makes pretty and dynamic error reporting, and a lot of other
nice features easier.
kunit_config.py:
- parse .config and Kconfig files.
kunit_kernel.py: provides helper functions to:
- configure the kernel using kunitconfig.
- build the kernel with the appropriate configuration.
- provide function to invoke the kernel and stream the output back.
Signed-off-by: Felix Guo <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
---
tools/testing/kunit/.gitignore | 3 +
tools/testing/kunit/kunit.py | 78 +++++++++++++++
tools/testing/kunit/kunit_config.py | 66 +++++++++++++
tools/testing/kunit/kunit_kernel.py | 148 ++++++++++++++++++++++++++++
tools/testing/kunit/kunit_parser.py | 119 ++++++++++++++++++++++
5 files changed, 414 insertions(+)
create mode 100644 tools/testing/kunit/.gitignore
create mode 100755 tools/testing/kunit/kunit.py
create mode 100644 tools/testing/kunit/kunit_config.py
create mode 100644 tools/testing/kunit/kunit_kernel.py
create mode 100644 tools/testing/kunit/kunit_parser.py
diff --git a/tools/testing/kunit/.gitignore b/tools/testing/kunit/.gitignore
new file mode 100644
index 0000000000000..c791ff59a37a9
--- /dev/null
+++ b/tools/testing/kunit/.gitignore
@@ -0,0 +1,3 @@
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
\ No newline at end of file
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
new file mode 100755
index 0000000000000..7413ec7351a20
--- /dev/null
+++ b/tools/testing/kunit/kunit.py
@@ -0,0 +1,78 @@
+#!/usr/bin/python3
+# SPDX-License-Identifier: GPL-2.0
+#
+# A thin wrapper on top of the KUnit Kernel
+#
+# Copyright (C) 2019, Google LLC.
+# Author: Felix Guo <[email protected]>
+# Author: Brendan Higgins <[email protected]>
+
+import argparse
+import sys
+import os
+import time
+
+import kunit_config
+import kunit_kernel
+import kunit_parser
+
+parser = argparse.ArgumentParser(description='Runs KUnit tests.')
+
+parser.add_argument('--raw_output', help='don\'t format output from kernel',
+ action='store_true')
+
+parser.add_argument('--timeout', help='maximum number of seconds to allow for '
+ 'all tests to run. This does not include time taken to '
+ 'build the tests.', type=int, default=300,
+ metavar='timeout')
+
+parser.add_argument('--jobs',
+ help='As in the make command, "Specifies the number of '
+ 'jobs (commands) to run simultaneously."',
+ type=int, default=8, metavar='jobs')
+
+parser.add_argument('--build_dir',
+ help='As in the make command, it specifies the build '
+ 'directory.',
+ type=str, default=None, metavar='build_dir')
+
+cli_args = parser.parse_args()
+
+linux = kunit_kernel.LinuxSourceTree()
+
+build_dir = None
+if cli_args.build_dir:
+ build_dir = cli_args.build_dir
+
+config_start = time.time()
+success = linux.build_reconfig(build_dir)
+config_end = time.time()
+if not success:
+ quit()
+
+kunit_parser.print_with_timestamp('Building KUnit Kernel ...')
+
+build_start = time.time()
+
+success = linux.build_um_kernel(jobs=cli_args.jobs, build_dir=build_dir)
+build_end = time.time()
+if not success:
+ quit()
+
+kunit_parser.print_with_timestamp('Starting KUnit Kernel ...')
+test_start = time.time()
+
+if cli_args.raw_output:
+ kunit_parser.raw_output(linux.run_kernel(timeout=cli_args.timeout,
+ build_dir=build_dir))
+else:
+ kunit_parser.parse_run_tests(linux.run_kernel(timeout=cli_args.timeout,
+ build_dir=build_dir))
+
+test_end = time.time()
+
+kunit_parser.print_with_timestamp((
+ "Elapsed time: %.3fs total, %.3fs configuring, %.3fs " +
+ "building, %.3fs running.\n") % (test_end - config_start,
+ config_end - config_start, build_end - build_start,
+ test_end - test_start))
diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py
new file mode 100644
index 0000000000000..167f47d9ab8e4
--- /dev/null
+++ b/tools/testing/kunit/kunit_config.py
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Builds a .config from a kunitconfig.
+#
+# Copyright (C) 2019, Google LLC.
+# Author: Felix Guo <[email protected]>
+# Author: Brendan Higgins <[email protected]>
+
+import collections
+import re
+
+CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_\w+ is not set$'
+CONFIG_PATTERN = r'^CONFIG_\w+=\S+$'
+
+KconfigEntryBase = collections.namedtuple('KconfigEntry', ['raw_entry'])
+
+
+class KconfigEntry(KconfigEntryBase):
+
+ def __str__(self) -> str:
+ return self.raw_entry
+
+
+class KconfigParseError(Exception):
+ """Error parsing Kconfig defconfig or .config."""
+
+
+class Kconfig(object):
+ """Represents defconfig or .config specified using the Kconfig language."""
+
+ def __init__(self):
+ self._entries = []
+
+ def entries(self):
+ return set(self._entries)
+
+ def add_entry(self, entry: KconfigEntry) -> None:
+ self._entries.append(entry)
+
+ def is_subset_of(self, other: "Kconfig") -> bool:
+ return self.entries().issubset(other.entries())
+
+ def write_to_file(self, path: str) -> None:
+ with open(path, 'w') as f:
+ for entry in self.entries():
+ f.write(str(entry) + '\n')
+
+ def parse_from_string(self, blob: str) -> None:
+ """Parses a string containing KconfigEntrys and populates this Kconfig."""
+ self._entries = []
+ is_not_set_matcher = re.compile(CONFIG_IS_NOT_SET_PATTERN)
+ config_matcher = re.compile(CONFIG_PATTERN)
+ for line in blob.split('\n'):
+ line = line.strip()
+ if not line:
+ continue
+ elif config_matcher.match(line) or is_not_set_matcher.match(line):
+ self._entries.append(KconfigEntry(line))
+ elif line[0] == '#':
+ continue
+ else:
+ raise KconfigParseError('Failed to parse: ' + line)
+
+ def read_from_file(self, path: str) -> None:
+ with open(path, 'r') as f:
+ self.parse_from_string(f.read())
diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
new file mode 100644
index 0000000000000..07c0abf2f47df
--- /dev/null
+++ b/tools/testing/kunit/kunit_kernel.py
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Runs UML kernel, collects output, and handles errors.
+#
+# Copyright (C) 2019, Google LLC.
+# Author: Felix Guo <[email protected]>
+# Author: Brendan Higgins <[email protected]>
+
+
+import logging
+import subprocess
+import os
+
+import kunit_config
+
+KCONFIG_PATH = '.config'
+
+class ConfigError(Exception):
+ """Represents an error trying to configure the Linux kernel."""
+
+
+class BuildError(Exception):
+ """Represents an error trying to build the Linux kernel."""
+
+
+class LinuxSourceTreeOperations(object):
+ """An abstraction over command line operations performed on a source tree."""
+
+ def make_mrproper(self):
+ try:
+ subprocess.check_output(['make', 'mrproper'])
+ except OSError as e:
+ raise ConfigError('Could not call make command: ' + e)
+ except subprocess.CalledProcessError as e:
+ raise ConfigError(e.output)
+
+ def make_olddefconfig(self, build_dir):
+ command = ['make', 'ARCH=um', 'olddefconfig']
+ if build_dir:
+ command += ['O=' + build_dir]
+ try:
+ subprocess.check_output(command)
+ except OSError as e:
+ raise ConfigError('Could not call make command: ' + e)
+ except subprocess.CalledProcessError as e:
+ raise ConfigError(e.output)
+
+ def make(self, jobs, build_dir):
+ command = ['make', 'ARCH=um', '--jobs=' + str(jobs)]
+ if build_dir:
+ command += ['O=' + build_dir]
+ try:
+ subprocess.check_output(command)
+ except OSError as e:
+ raise BuildError('Could not call execute make: ' + e)
+ except subprocess.CalledProcessError as e:
+ raise BuildError(e.output)
+
+ def linux_bin(self, params, timeout, build_dir):
+ """Runs the Linux UML binary. Must be named 'linux'."""
+ linux_bin = './linux'
+ if build_dir:
+ linux_bin = os.path.join(build_dir, 'linux')
+ process = subprocess.Popen(
+ [linux_bin] + params,
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE,
+ stderr=subprocess.PIPE)
+ process.wait(timeout=timeout)
+ return process
+
+
+def get_kconfig_path(build_dir):
+ kconfig_path = KCONFIG_PATH
+ if build_dir:
+ kconfig_path = os.path.join(build_dir, KCONFIG_PATH)
+ return kconfig_path
+
+class LinuxSourceTree(object):
+ """Represents a Linux kernel source tree with KUnit tests."""
+
+ def __init__(self):
+ self._kconfig = kunit_config.Kconfig()
+ self._kconfig.read_from_file('kunitconfig')
+ self._ops = LinuxSourceTreeOperations()
+
+ def clean(self):
+ try:
+ self._ops.make_mrproper()
+ except ConfigError as e:
+ logging.error(e)
+ return False
+ return True
+
+ def build_config(self, build_dir):
+ kconfig_path = get_kconfig_path(build_dir)
+ if build_dir and not os.path.exists(build_dir):
+ os.mkdir(build_dir)
+ self._kconfig.write_to_file(kconfig_path)
+ try:
+ self._ops.make_olddefconfig(build_dir)
+ except ConfigError as e:
+ logging.error(e)
+ return False
+ validated_kconfig = kunit_config.Kconfig()
+ validated_kconfig.read_from_file(kconfig_path)
+ if not self._kconfig.is_subset_of(validated_kconfig):
+ logging.error('Provided Kconfig is not contained in validated .config!')
+ return False
+ return True
+
+ def build_reconfig(self, build_dir):
+ """Creates a new .config if it is not a subset of the kunitconfig."""
+ kconfig_path = get_kconfig_path(build_dir)
+ if os.path.exists(kconfig_path):
+ existing_kconfig = kunit_config.Kconfig()
+ existing_kconfig.read_from_file(kconfig_path)
+ if not self._kconfig.is_subset_of(existing_kconfig):
+ print('Regenerating .config ...')
+ os.remove(kconfig_path)
+ return self.build_config(build_dir)
+ else:
+ return True
+ else:
+ print('Generating .config ...')
+ return self.build_config(build_dir)
+
+ def build_um_kernel(self, jobs, build_dir):
+ try:
+ self._ops.make_olddefconfig(build_dir)
+ self._ops.make(jobs, build_dir)
+ except (ConfigError, BuildError) as e:
+ logging.error(e)
+ return False
+ used_kconfig = kunit_config.Kconfig()
+ used_kconfig.read_from_file(get_kconfig_path(build_dir))
+ if not self._kconfig.is_subset_of(used_kconfig):
+ logging.error('Provided Kconfig is not contained in final config!')
+ return False
+ return True
+
+ def run_kernel(self, args=[], timeout=None, build_dir=None):
+ args.extend(['mem=256M'])
+ process = self._ops.linux_bin(args, timeout, build_dir)
+ with open('test.log', 'w') as f:
+ for line in process.stdout:
+ f.write(line.rstrip().decode('ascii') + '\n')
+ yield line.rstrip().decode('ascii')
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
new file mode 100644
index 0000000000000..6c81d4dcfabb5
--- /dev/null
+++ b/tools/testing/kunit/kunit_parser.py
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Parses test results from a kernel dmesg log.
+#
+# Copyright (C) 2019, Google LLC.
+# Author: Felix Guo <[email protected]>
+# Author: Brendan Higgins <[email protected]>
+
+import re
+from datetime import datetime
+
+kunit_start_re = re.compile('printk: console .* enabled')
+kunit_end_re = re.compile('List of all partitions:')
+
+def isolate_kunit_output(kernel_output):
+ started = False
+ for line in kernel_output:
+ if kunit_start_re.match(line):
+ started = True
+ elif kunit_end_re.match(line):
+ break
+ elif started:
+ yield line
+
+def raw_output(kernel_output):
+ for line in kernel_output:
+ print(line)
+
+DIVIDER = "=" * 30
+
+RESET = '\033[0;0m'
+
+def red(text):
+ return '\033[1;31m' + text + RESET
+
+def yellow(text):
+ return '\033[1;33m' + text + RESET
+
+def green(text):
+ return '\033[1;32m' + text + RESET
+
+def print_with_timestamp(message):
+ print('[%s] %s' % (datetime.now().strftime('%H:%M:%S'), message))
+
+def print_log(log):
+ for m in log:
+ print_with_timestamp(m)
+
+def parse_run_tests(kernel_output):
+ test_case_output = re.compile('^kunit .*?: (.*)$')
+
+ test_module_success = re.compile('^kunit .*: all tests passed')
+ test_module_fail = re.compile('^kunit .*: one or more tests failed')
+
+ test_case_success = re.compile('^kunit (.*): (.*) passed')
+ test_case_fail = re.compile('^kunit (.*): (.*) failed')
+ test_case_crash = re.compile('^kunit (.*): (.*) crashed')
+
+ total_tests = set()
+ failed_tests = set()
+ crashed_tests = set()
+
+ def get_test_name(match):
+ return match.group(1) + ":" + match.group(2)
+
+ current_case_log = []
+ def end_one_test(match, log):
+ log.clear()
+ total_tests.add(get_test_name(match))
+
+ print_with_timestamp(DIVIDER)
+ for line in isolate_kunit_output(kernel_output):
+ # Ignore module output:
+ if (test_module_success.match(line) or
+ test_module_fail.match(line)):
+ print_with_timestamp(DIVIDER)
+ continue
+
+ match = re.match(test_case_success, line)
+ if match:
+ print_with_timestamp(green("[PASSED] ") +
+ get_test_name(match))
+ end_one_test(match, current_case_log)
+ continue
+
+ match = re.match(test_case_fail, line)
+ # Crashed tests will report as both failed and crashed. We only
+ # want to show and count it once.
+ if match and get_test_name(match) not in crashed_tests:
+ failed_tests.add(get_test_name(match))
+ print_with_timestamp(red("[FAILED] " +
+ get_test_name(match)))
+ print_log(map(yellow, current_case_log))
+ print_with_timestamp("")
+ end_one_test(match, current_case_log)
+ continue
+
+ match = re.match(test_case_crash, line)
+ if match:
+ crashed_tests.add(get_test_name(match))
+ print_with_timestamp(yellow("[CRASH] " +
+ get_test_name(match)))
+ print_log(current_case_log)
+ print_with_timestamp("")
+ end_one_test(match, current_case_log)
+ continue
+
+ # Strip off the `kunit module-name:` prefix
+ match = re.match(test_case_output, line)
+ if match:
+ current_case_log.append(match.group(1))
+ else:
+ current_case_log.append(line)
+
+ fmt = green if (len(failed_tests) + len(crashed_tests) == 0) else red
+ print_with_timestamp(
+ fmt("Testing complete. %d tests run. %d failed. %d crashed." %
+ (len(total_tests), len(failed_tests), len(crashed_tests))))
+
--
2.21.0.392.gf8f6787159e-goog
Add support for aborting/bailing out of test cases, which is needed for
implementing assertions.
An assertion is like an expectation, but bails out of the test case
early if the assertion is not met. The idea with assertions is that you
use them to state all the preconditions for your test. Logically
speaking, these are the premises of the test case, so if a premise isn't
true, there is no point in continuing the test case because there are no
conclusions that can be drawn without the premises. Whereas, the
expectation is the thing you are trying to prove.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/test.h | 13 ++++
include/kunit/try-catch.h | 91 +++++++++++++++++++++++++
kunit/Makefile | 3 +-
kunit/test.c | 138 +++++++++++++++++++++++++++++++++++---
kunit/try-catch.c | 96 ++++++++++++++++++++++++++
5 files changed, 332 insertions(+), 9 deletions(-)
create mode 100644 include/kunit/try-catch.h
create mode 100644 kunit/try-catch.c
diff --git a/include/kunit/test.h b/include/kunit/test.h
index e441270561ece..1b77caeb5d51f 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <kunit/kunit-stream.h>
+#include <kunit/try-catch.h>
struct kunit_resource;
@@ -166,15 +167,27 @@ struct kunit {
/* private: internal use only. */
const char *name; /* Read only after initialization! */
+ struct kunit_try_catch try_catch;
spinlock_t lock; /* Gaurds all mutable test state. */
bool success; /* Protected by lock. */
+ bool death_test; /* Protected by lock. */
struct list_head resources; /* Protected by lock. */
void (*vprintk)(const struct kunit *test,
const char *level,
struct va_format *vaf);
void (*fail)(struct kunit *test, struct kunit_stream *stream);
+ void (*abort)(struct kunit *test);
};
+static inline void kunit_set_death_test(struct kunit *test, bool death_test)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&test->lock, flags);
+ test->death_test = death_test;
+ spin_unlock_irqrestore(&test->lock, flags);
+}
+
int kunit_init_test(struct kunit *test, const char *name);
int kunit_run_tests(struct kunit_module *module);
diff --git a/include/kunit/try-catch.h b/include/kunit/try-catch.h
new file mode 100644
index 0000000000000..e85abe044b6b5
--- /dev/null
+++ b/include/kunit/try-catch.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * An API to allow a function, that may fail, to be executed, and recover in a
+ * controlled manner.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_TRY_CATCH_H
+#define _KUNIT_TRY_CATCH_H
+
+#include <linux/types.h>
+
+typedef void (*kunit_try_catch_func_t)(void *);
+
+struct kunit;
+
+/*
+ * struct kunit_try_catch - provides a generic way to run code which might fail.
+ * @context: used to pass user data to the try and catch functions.
+ *
+ * kunit_try_catch provides a generic, architecture independent way to execute
+ * an arbitrary function of type kunit_try_catch_func_t which may bail out by
+ * calling kunit_try_catch_throw(). If kunit_try_catch_throw() is called, @try
+ * is stopped at the site of invocation and @catch is catch is called.
+ *
+ * struct kunit_try_catch provides a generic interface for the functionality
+ * needed to implement kunit->abort() which in turn is needed for implementing
+ * assertions. Assertions allow stating a precondition for a test simplifying
+ * how test cases are written and presented.
+ *
+ * Assertions are like expectations, except they abort (call
+ * kunit_try_catch_throw()) when the specified condition is not met. This is
+ * useful when you look at a test case as a logical statement about some piece
+ * of code, where assertions are the premises for the test case, and the
+ * conclusion is a set of predicates, rather expectations, that must all be
+ * true. If your premises are violated, it does not makes sense to continue.
+ */
+struct kunit_try_catch {
+ /* private: internal use only. */
+ void (*run)(struct kunit_try_catch *try_catch);
+ void __noreturn (*throw)(struct kunit_try_catch *try_catch);
+ struct kunit *test;
+ struct completion *try_completion;
+ int try_result;
+ kunit_try_catch_func_t try;
+ kunit_try_catch_func_t catch;
+ void *context;
+};
+
+/*
+ * Exposed to be overridden for other architectures.
+ */
+void kunit_try_catch_init_internal(struct kunit_try_catch *try_catch);
+
+static inline void kunit_try_catch_init(struct kunit_try_catch *try_catch,
+ struct kunit *test,
+ kunit_try_catch_func_t try,
+ kunit_try_catch_func_t catch)
+{
+ try_catch->test = test;
+ kunit_try_catch_init_internal(try_catch);
+ try_catch->try = try;
+ try_catch->catch = catch;
+}
+
+static inline void kunit_try_catch_run(struct kunit_try_catch *try_catch,
+ void *context)
+{
+ try_catch->context = context;
+ try_catch->run(try_catch);
+}
+
+static inline void __noreturn kunit_try_catch_throw(
+ struct kunit_try_catch *try_catch)
+{
+ try_catch->throw(try_catch);
+}
+
+static inline int kunit_try_catch_get_result(struct kunit_try_catch *try_catch)
+{
+ return try_catch->try_result;
+}
+
+/*
+ * Exposed for testing only.
+ */
+void kunit_generic_try_catch_init(struct kunit_try_catch *try_catch);
+
+#endif /* _KUNIT_TRY_CATCH_H */
diff --git a/kunit/Makefile b/kunit/Makefile
index 60a9ea6cb4697..1f7680cfa11ad 100644
--- a/kunit/Makefile
+++ b/kunit/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_KUNIT) += test.o \
string-stream.o \
- kunit-stream.o
+ kunit-stream.o \
+ try-catch.o
obj-$(CONFIG_KUNIT_TEST) += string-stream-test.o
diff --git a/kunit/test.c b/kunit/test.c
index 01e82c18b2fa6..5eace2a527a4e 100644
--- a/kunit/test.c
+++ b/kunit/test.c
@@ -6,10 +6,9 @@
* Author: Brendan Higgins <[email protected]>
*/
-#include <linux/sched.h>
#include <linux/sched/debug.h>
-#include <os.h>
#include <kunit/test.h>
+#include <kunit/try-catch.h>
static bool kunit_get_success(struct kunit *test)
{
@@ -32,6 +31,18 @@ static void kunit_set_success(struct kunit *test, bool success)
spin_unlock_irqrestore(&test->lock, flags);
}
+static bool kunit_get_death_test(struct kunit *test)
+{
+ unsigned long flags;
+ bool death_test;
+
+ spin_lock_irqsave(&test->lock, flags);
+ death_test = test->death_test;
+ spin_unlock_irqrestore(&test->lock, flags);
+
+ return death_test;
+}
+
static int kunit_vprintk_emit(const struct kunit *test,
int level,
const char *fmt,
@@ -70,6 +81,21 @@ static void kunit_fail(struct kunit *test, struct kunit_stream *stream)
kunit_stream_commit(stream);
}
+static void __noreturn kunit_abort(struct kunit *test)
+{
+ kunit_set_death_test(test, true);
+
+ kunit_try_catch_throw(&test->try_catch);
+
+ /*
+ * Throw could not abort from test.
+ *
+ * XXX: we should never reach this line! As kunit_try_catch_throw is
+ * marked __noreturn.
+ */
+ WARN_ONCE(true, "Throw could not abort from test!\n");
+}
+
int kunit_init_test(struct kunit *test, const char *name)
{
spin_lock_init(&test->lock);
@@ -77,6 +103,7 @@ int kunit_init_test(struct kunit *test, const char *name)
test->name = name;
test->vprintk = kunit_vprintk;
test->fail = kunit_fail;
+ test->abort = kunit_abort;
return 0;
}
@@ -122,16 +149,111 @@ static void kunit_run_case_cleanup(struct kunit *test,
}
/*
- * Performs all logic to run a test case.
+ * Handles an unexpected crash in a test case.
*/
-static bool kunit_run_case(struct kunit *test,
- struct kunit_module *module,
- struct kunit_case *test_case)
+static void kunit_handle_test_crash(struct kunit *test,
+ struct kunit_module *module,
+ struct kunit_case *test_case)
{
- kunit_set_success(test, true);
+ kunit_err(test, "%s crashed", test_case->name);
+ /*
+ * TODO([email protected]): This prints the stack trace up
+ * through this frame, not up to the frame that caused the crash.
+ */
+ show_stack(NULL, NULL);
+
+ kunit_case_internal_cleanup(test);
+}
+struct kunit_try_catch_context {
+ struct kunit *test;
+ struct kunit_module *module;
+ struct kunit_case *test_case;
+};
+
+static void kunit_try_run_case(void *data)
+{
+ struct kunit_try_catch_context *ctx = data;
+ struct kunit *test = ctx->test;
+ struct kunit_module *module = ctx->module;
+ struct kunit_case *test_case = ctx->test_case;
+
+ /*
+ * kunit_run_case_internal may encounter a fatal error; if it does,
+ * abort will be called, this thread will exit, and finally the parent
+ * thread will resume control and handle any necessary clean up.
+ */
kunit_run_case_internal(test, module, test_case);
+ /* This line may never be reached. */
kunit_run_case_cleanup(test, module, test_case);
+}
+
+static void kunit_catch_run_case(void *data)
+{
+ struct kunit_try_catch_context *ctx = data;
+ struct kunit *test = ctx->test;
+ struct kunit_module *module = ctx->module;
+ struct kunit_case *test_case = ctx->test_case;
+ int try_exit_code = kunit_try_catch_get_result(&test->try_catch);
+
+ if (try_exit_code) {
+ kunit_set_success(test, false);
+ /*
+ * Test case could not finish, we have no idea what state it is
+ * in, so don't do clean up.
+ */
+ if (try_exit_code == -ETIMEDOUT)
+ kunit_err(test, "test case timed out\n");
+ /*
+ * Unknown internal error occurred preventing test case from
+ * running, so there is nothing to clean up.
+ */
+ else
+ kunit_err(test, "internal error occurred preventing test case from running: %d\n",
+ try_exit_code);
+ return;
+ }
+
+ if (kunit_get_death_test(test)) {
+ /*
+ * EXPECTED DEATH: kunit_run_case_internal encountered
+ * anticipated fatal error. Everything should be in a safe
+ * state.
+ */
+ kunit_run_case_cleanup(test, module, test_case);
+ } else {
+ /*
+ * UNEXPECTED DEATH: kunit_run_case_internal encountered an
+ * unanticipated fatal error. We have no idea what the state of
+ * the test case is in.
+ */
+ kunit_handle_test_crash(test, module, test_case);
+ kunit_set_success(test, false);
+ }
+}
+
+/*
+ * Performs all logic to run a test case. It also catches most errors that
+ * occurs in a test case and reports them as failures.
+ */
+static bool kunit_run_case_catch_errors(struct kunit *test,
+ struct kunit_module *module,
+ struct kunit_case *test_case)
+{
+ struct kunit_try_catch *try_catch = &test->try_catch;
+ struct kunit_try_catch_context context;
+
+ kunit_set_success(test, true);
+ kunit_set_death_test(test, false);
+
+ kunit_try_catch_init(try_catch,
+ test,
+ kunit_try_run_case,
+ kunit_catch_run_case);
+ context.test = test;
+ context.module = module;
+ context.test_case = test_case;
+ kunit_try_catch_run(try_catch, &context);
return kunit_get_success(test);
}
@@ -148,7 +270,7 @@ int kunit_run_tests(struct kunit_module *module)
return ret;
for (test_case = module->test_cases; test_case->run_case; test_case++) {
- success = kunit_run_case(&test, module, test_case);
+ success = kunit_run_case_catch_errors(&test, module, test_case);
if (!success)
all_passed = false;
diff --git a/kunit/try-catch.c b/kunit/try-catch.c
new file mode 100644
index 0000000000000..c4cdb30880714
--- /dev/null
+++ b/kunit/try-catch.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * An API to allow a function, that may fail, to be executed, and recover in a
+ * controlled manner.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <kunit/try-catch.h>
+#include <kunit/test.h>
+#include <linux/completion.h>
+#include <linux/kthread.h>
+
+static void __noreturn kunit_generic_throw(struct kunit_try_catch *try_catch)
+{
+ try_catch->try_result = -EFAULT;
+ complete_and_exit(try_catch->try_completion, -EFAULT);
+}
+
+static int kunit_generic_run_threadfn_adapter(void *data)
+{
+ struct kunit_try_catch *try_catch = data;
+
+ try_catch->try(try_catch->context);
+
+ complete_and_exit(try_catch->try_completion, 0);
+}
+
+static void kunit_generic_run_try_catch(struct kunit_try_catch *try_catch)
+{
+ DECLARE_COMPLETION_ONSTACK(try_completion);
+ struct kunit *test = try_catch->test;
+ struct task_struct *task_struct;
+ int exit_code, status;
+
+ try_catch->try_completion = &try_completion;
+ try_catch->try_result = 0;
+ task_struct = kthread_run(kunit_generic_run_threadfn_adapter,
+ try_catch,
+ "kunit_try_catch_thread");
+ if (IS_ERR(task_struct)) {
+ try_catch->catch(try_catch->context);
+ return;
+ }
+
+ /*
+ * TODO([email protected]): We should probably have some type of
+ * variable timeout here. The only question is what that timeout value
+ * should be.
+ *
+ * The intention has always been, at some point, to be able to label
+ * tests with some type of size bucket (unit/small, integration/medium,
+ * large/system/end-to-end, etc), where each size bucket would get a
+ * default timeout value kind of like what Bazel does:
+ * https://docs.bazel.build/versions/master/be/common-definitions.html#test.size
+ * There is still some debate to be had on exactly how we do this. (For
+ * one, we probably want to have some sort of test runner level
+ * timeout.)
+ *
+ * For more background on this topic, see:
+ * https://mike-bland.com/2011/11/01/small-medium-large.html
+ */
+ status = wait_for_completion_timeout(&try_completion,
+ 300 * MSEC_PER_SEC); /* 5 min */
+ if (status < 0) {
+ kunit_err(test, "try timed out\n");
+ try_catch->try_result = -ETIMEDOUT;
+ }
+
+ exit_code = try_catch->try_result;
+
+ if (!exit_code)
+ return;
+
+ if (exit_code == -EFAULT)
+ try_catch->try_result = 0;
+ else if (exit_code == -EINTR)
+ kunit_err(test, "wake_up_process() was never called\n");
+ else if (exit_code)
+ kunit_err(test, "Unknown error: %d\n", exit_code);
+
+ try_catch->catch(try_catch->context);
+}
+
+void kunit_generic_try_catch_init(struct kunit_try_catch *try_catch)
+{
+ try_catch->run = kunit_generic_run_try_catch;
+ try_catch->throw = kunit_generic_throw;
+}
+
+void __weak kunit_try_catch_init_internal(struct kunit_try_catch *try_catch)
+{
+ kunit_generic_try_catch_init(try_catch);
+}
+
--
2.21.0.392.gf8f6787159e-goog
Add support for expectations, which allow properties to be specified and
then verified in tests.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/test.h | 419 +++++++++++++++++++++++++++++++++++++++++++
kunit/test.c | 34 ++++
2 files changed, 453 insertions(+)
diff --git a/include/kunit/test.h b/include/kunit/test.h
index 4668e8a635954..e441270561ece 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -273,4 +273,423 @@ void __printf(3, 4) kunit_printk(const char *level,
#define kunit_err(test, fmt, ...) \
kunit_printk(KERN_ERR, test, fmt, ##__VA_ARGS__)
+static inline struct kunit_stream *kunit_expect_start(struct kunit *test,
+ const char *file,
+ const char *line)
+{
+ struct kunit_stream *stream = kunit_new_stream(test);
+
+ kunit_stream_add(stream, "EXPECTATION FAILED at %s:%s\n\t", file, line);
+
+ return stream;
+}
+
+static inline void kunit_expect_end(struct kunit *test,
+ bool success,
+ struct kunit_stream *stream)
+{
+ if (!success)
+ test->fail(test, stream);
+ else
+ kunit_stream_clear(stream);
+}
+
+#define KUNIT_EXPECT_START(test) \
+ kunit_expect_start(test, __FILE__, __stringify(__LINE__))
+
+#define KUNIT_EXPECT_END(test, success, stream) \
+ kunit_expect_end(test, success, stream)
+
+#define KUNIT_EXPECT_MSG(test, success, message, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ \
+ kunit_stream_add(__stream, message); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ KUNIT_EXPECT_END(test, success, __stream); \
+} while (0)
+
+#define KUNIT_EXPECT(test, success, message) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ \
+ kunit_stream_add(__stream, message); \
+ KUNIT_EXPECT_END(test, success, __stream); \
+} while (0)
+
+/**
+ * KUNIT_SUCCEED() - A no-op expectation. Only exists for code clarity.
+ * @test: The test context object.
+ *
+ * The opposite of KUNIT_FAIL(), it is an expectation that cannot fail. In other
+ * words, it does nothing and only exists for code clarity. See
+ * KUNIT_EXPECT_TRUE() for more information.
+ */
+#define KUNIT_SUCCEED(test) do {} while (0)
+
+/**
+ * KUNIT_FAIL() - Always causes a test to fail when evaluated.
+ * @test: The test context object.
+ * @fmt: an informational message to be printed when the assertion is made.
+ * @...: string format arguments.
+ *
+ * The opposite of KUNIT_SUCCEED(), it is an expectation that always fails. In
+ * other words, it always results in a failed expectation, and consequently
+ * always causes the test case to fail when evaluated. See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_FAIL(test, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ KUNIT_EXPECT_END(test, false, __stream); \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_TRUE() - Causes a test failure when the expression is not true.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails when this does
+ * not evaluate to true.
+ *
+ * This and expectations of the form `KUNIT_EXPECT_*` will cause the test case
+ * to fail when the specified condition is not met; however, it will not prevent
+ * the test case from continuing to run; this is otherwise known as an
+ * *expectation failure*.
+ */
+#define KUNIT_EXPECT_TRUE(test, condition) \
+ KUNIT_EXPECT(test, (condition), \
+ "Expected " #condition " is true, but is false.\n")
+
+#define KUNIT_EXPECT_TRUE_MSG(test, condition, fmt, ...) \
+ KUNIT_EXPECT_MSG(test, (condition), \
+ "Expected " #condition " is true, but is false.\n",\
+ fmt, ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_FALSE() - Makes a test failure when the expression is not false.
+ * @test: The test context object.
+ * @condition: an arbitrary boolean expression. The test fails when this does
+ * not evaluate to false.
+ *
+ * Sets an expectation that @condition evaluates to false. See
+ * KUNIT_EXPECT_TRUE() for more information.
+ */
+#define KUNIT_EXPECT_FALSE(test, condition) \
+ KUNIT_EXPECT(test, !(condition), \
+ "Expected " #condition " is false, but is true.")
+
+#define KUNIT_EXPECT_FALSE_MSG(test, condition, fmt, ...) \
+ KUNIT_EXPECT_MSG(test, !(condition), \
+ "Expected " #condition " is false, but is true.\n",\
+ fmt, ##__VA_ARGS__)
+
+void kunit_expect_binary_msg(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line,
+ const char *fmt, ...);
+
+static inline void kunit_expect_binary(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line)
+{
+ struct kunit_stream *stream = kunit_expect_start(test, file, line);
+
+ kunit_stream_add(stream,
+ "Expected %s %s %s, but\n",
+ left_name, compare_name, right_name);
+ kunit_stream_add(stream, "\t\t%s == %lld\n", left_name, left);
+ kunit_stream_add(stream, "\t\t%s == %lld\n", right_name, right);
+
+ kunit_expect_end(test, compare_result, stream);
+}
+
+/*
+ * A factory macro for defining the expectations for the basic comparisons
+ * defined for the built in types.
+ *
+ * Unfortunately, there is no common type that all types can be promoted to for
+ * which all the binary operators behave the same way as for the actual types
+ * (for example, there is no type that long long and unsigned long long can
+ * both be cast to where the comparison result is preserved for all values). So
+ * the best we can do is do the comparison in the original types and then coerce
+ * everything to long long for printing; this way, the comparison behaves
+ * correctly and the printed out value usually makes sense without
+ * interpretation, but can always be interpretted to figure out the actual
+ * value.
+ */
+#define KUNIT_EXPECT_BINARY(test, left, condition, right) do { \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ kunit_expect_binary(test, \
+ (long long) __left, #left, \
+ (long long) __right, #right, \
+ __left condition __right, #condition, \
+ __FILE__, __stringify(__LINE__)); \
+} while (0)
+
+#define KUNIT_EXPECT_BINARY_MSG(test, left, condition, right, fmt, ...) do { \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ kunit_expect_binary_msg(test, \
+ (long long) __left, #left, \
+ (long long) __right, #right, \
+ __left condition __right, #condition, \
+ __FILE__, __stringify(__LINE__), \
+ fmt, ##__VA_ARGS__); \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_EQ() - Sets an expectation that @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) == (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_EQ(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, ==, right)
+
+#define KUNIT_EXPECT_EQ_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ ==, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_NE() - An expectation that @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are not
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) != (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_NE(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, !=, right)
+
+#define KUNIT_EXPECT_NE_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ !=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_LT() - An expectation that @left is less than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is less than the
+ * value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) < (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_LT(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, <, right)
+
+#define KUNIT_EXPECT_LT_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ <, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_LE() - Expects that @left is less than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is less than or
+ * equal to the value that @right evaluates to. Semantically this is equivalent
+ * to KUNIT_EXPECT_TRUE(@test, (@left) <= (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_LE(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, <=, right)
+
+#define KUNIT_EXPECT_LE_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ <=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_GT() - An expectation that @left is greater than @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is greater than
+ * the value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) > (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_GT(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, >, right)
+
+#define KUNIT_EXPECT_GT_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ >, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_GE() - Expects that @left is greater than or equal to @right.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a primitive C type.
+ * @right: an arbitrary expression that evaluates to a primitive C type.
+ *
+ * Sets an expectation that the value that @left evaluates to is greater than
+ * the value that @right evaluates to. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, (@left) >= (@right)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_GE(test, left, right) \
+ KUNIT_EXPECT_BINARY(test, left, >=, right)
+
+#define KUNIT_EXPECT_GE_MSG(test, left, right, fmt, ...) \
+ KUNIT_EXPECT_BINARY_MSG(test, \
+ left, \
+ >=, \
+ right, \
+ fmt, \
+ ##__VA_ARGS__)
+
+/**
+ * KUNIT_EXPECT_STREQ() - Expects that strings @left and @right are equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, !strcmp((@left), (@right))). See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_EXPECT_STREQ(test, left, right) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Expected " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ \
+ KUNIT_EXPECT_END(test, !strcmp(left, right), __stream); \
+} while (0)
+
+#define KUNIT_EXPECT_STREQ_MSG(test, left, right, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Expected " #left " == " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ \
+ KUNIT_EXPECT_END(test, !strcmp(left, right), __stream); \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_STRNEQ() - Expects that strings @left and @right are not equal.
+ * @test: The test context object.
+ * @left: an arbitrary expression that evaluates to a null terminated string.
+ * @right: an arbitrary expression that evaluates to a null terminated string.
+ *
+ * Sets an expectation that the values that @left and @right evaluate to are
+ * not equal. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, strcmp((@left), (@right))). See KUNIT_EXPECT_TRUE()
+ * for more information.
+ */
+#define KUNIT_EXPECT_STRNEQ(test, left, right) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Expected " #left " != " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ \
+ KUNIT_EXPECT_END(test, strcmp(left, right), __stream); \
+} while (0)
+
+#define KUNIT_EXPECT_STRNEQ_MSG(test, left, right, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(left) __left = (left); \
+ typeof(right) __right = (right); \
+ \
+ kunit_stream_add(__stream, "Expected " #left " != " #right ", but\n"); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #left, __left); \
+ kunit_stream_add(__stream, "\t\t%s == %s\n", #right, __right); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ \
+ KUNIT_EXPECT_END(test, strcmp(left, right), __stream); \
+} while (0)
+
+/**
+ * KUNIT_EXPECT_NOT_ERR_OR_NULL() - Expects that @ptr is not null and not err.
+ * @test: The test context object.
+ * @ptr: an arbitrary pointer.
+ *
+ * Sets an expectation that the value that @ptr evaluates to is not null and not
+ * an errno stored in a pointer. This is semantically equivalent to
+ * KUNIT_EXPECT_TRUE(@test, !IS_ERR_OR_NULL(@ptr)). See KUNIT_EXPECT_TRUE() for
+ * more information.
+ */
+#define KUNIT_EXPECT_NOT_ERR_OR_NULL(test, ptr) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(ptr) __ptr = (ptr); \
+ \
+ if (!__ptr) \
+ kunit_stream_add(__stream, \
+ "Expected " #ptr " is not null, but is."); \
+ if (IS_ERR(__ptr)) \
+ kunit_stream_add(__stream, \
+ "Expected " #ptr " is not error, but is: %ld", \
+ PTR_ERR(__ptr)); \
+ \
+ KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream); \
+} while (0)
+
+#define KUNIT_EXPECT_NOT_ERR_OR_NULL_MSG(test, ptr, fmt, ...) do { \
+ struct kunit_stream *__stream = KUNIT_EXPECT_START(test); \
+ typeof(ptr) __ptr = (ptr); \
+ \
+ if (!__ptr) { \
+ kunit_stream_add(__stream, \
+ "Expected " #ptr " is not null, but is."); \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ } \
+ if (IS_ERR(__ptr)) { \
+ kunit_stream_add(__stream, \
+ "Expected " #ptr " is not error, but is: %ld", \
+ PTR_ERR(__ptr)); \
+ \
+ kunit_stream_add(__stream, fmt, ##__VA_ARGS__); \
+ } \
+ KUNIT_EXPECT_END(test, !IS_ERR_OR_NULL(__ptr), __stream); \
+} while (0)
+
#endif /* _KUNIT_TEST_H */
diff --git a/kunit/test.c b/kunit/test.c
index f7575b127e2df..01e82c18b2fa6 100644
--- a/kunit/test.c
+++ b/kunit/test.c
@@ -269,3 +269,37 @@ void kunit_printk(const char *level,
va_end(args);
}
+
+void kunit_expect_binary_msg(struct kunit *test,
+ long long left, const char *left_name,
+ long long right, const char *right_name,
+ bool compare_result,
+ const char *compare_name,
+ const char *file,
+ const char *line,
+ const char *fmt, ...)
+{
+ struct kunit_stream *stream = kunit_expect_start(test, file, line);
+ struct va_format vaf;
+ va_list args;
+
+ kunit_stream_add(stream,
+ "Expected %s %s %s, but\n",
+ left_name, compare_name, right_name);
+ kunit_stream_add(stream, "\t\t%s == %lld\n", left_name, left);
+ kunit_stream_add(stream, "\t\t%s == %lld", right_name, right);
+
+ if (fmt) {
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ kunit_stream_add(stream, "\n%pV", &vaf);
+
+ va_end(args);
+ }
+
+ kunit_expect_end(test, compare_result, stream);
+}
+
--
2.21.0.392.gf8f6787159e-goog
Add entry for the new proc sysctl KUnit test to the PROC SYSCTL section.
Signed-off-by: Brendan Higgins <[email protected]>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index fc2cedbd9b43e..03054e4c6386c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12523,6 +12523,7 @@ S: Maintained
F: fs/proc/proc_sysctl.c
F: include/linux/sysctl.h
F: kernel/sysctl.c
+F: kernel/sysctl-test.c
F: tools/testing/selftests/sysctl/
PS3 NETWORK SUPPORT
--
2.21.0.392.gf8f6787159e-goog
Add KUnit to root Kconfig and Makefile allowing it to actually be built.
Signed-off-by: Brendan Higgins <[email protected]>
---
Kconfig | 2 ++
Makefile | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index 48a80beab6853..10428501edb78 100644
--- a/Kconfig
+++ b/Kconfig
@@ -30,3 +30,5 @@ source "crypto/Kconfig"
source "lib/Kconfig"
source "lib/Kconfig.debug"
+
+source "kunit/Kconfig"
diff --git a/Makefile b/Makefile
index c0a34064c5744..639d353f98ca9 100644
--- a/Makefile
+++ b/Makefile
@@ -964,7 +964,7 @@ endif
PHONY += prepare0
ifeq ($(KBUILD_EXTMOD),)
-core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
+core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ kunit/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
--
2.21.0.392.gf8f6787159e-goog
A number of test features need to do pretty complicated string printing
where it may not be possible to rely on a single preallocated string
with parameters.
So provide a library for constructing the string as you go similar to
C++'s std::string.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/string-stream.h | 51 ++++++++++++
kunit/Makefile | 3 +-
kunit/string-stream.c | 144 ++++++++++++++++++++++++++++++++++
3 files changed, 197 insertions(+), 1 deletion(-)
create mode 100644 include/kunit/string-stream.h
create mode 100644 kunit/string-stream.c
diff --git a/include/kunit/string-stream.h b/include/kunit/string-stream.h
new file mode 100644
index 0000000000000..567a4629406da
--- /dev/null
+++ b/include/kunit/string-stream.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * C++ stream style string builder used in KUnit for building messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_STRING_STREAM_H
+#define _KUNIT_STRING_STREAM_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <stdarg.h>
+
+struct string_stream_fragment {
+ struct list_head node;
+ char *fragment;
+};
+
+struct string_stream {
+ size_t length;
+ struct list_head fragments;
+
+ /* length and fragments are protected by this lock */
+ spinlock_t lock;
+ struct kref refcount;
+};
+
+struct string_stream *new_string_stream(void);
+
+void destroy_string_stream(struct string_stream *stream);
+
+void string_stream_get(struct string_stream *stream);
+
+int string_stream_put(struct string_stream *stream);
+
+int string_stream_add(struct string_stream *this, const char *fmt, ...);
+
+int string_stream_vadd(struct string_stream *this,
+ const char *fmt,
+ va_list args);
+
+char *string_stream_get_string(struct string_stream *this);
+
+void string_stream_clear(struct string_stream *this);
+
+bool string_stream_is_empty(struct string_stream *this);
+
+#endif /* _KUNIT_STRING_STREAM_H */
diff --git a/kunit/Makefile b/kunit/Makefile
index 5efdc4dea2c08..275b565a0e81f 100644
--- a/kunit/Makefile
+++ b/kunit/Makefile
@@ -1 +1,2 @@
-obj-$(CONFIG_KUNIT) += test.o
+obj-$(CONFIG_KUNIT) += test.o \
+ string-stream.o
diff --git a/kunit/string-stream.c b/kunit/string-stream.c
new file mode 100644
index 0000000000000..7018194ecf2fa
--- /dev/null
+++ b/kunit/string-stream.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * C++ stream style string builder used in KUnit for building messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <kunit/string-stream.h>
+
+int string_stream_vadd(struct string_stream *this,
+ const char *fmt,
+ va_list args)
+{
+ struct string_stream_fragment *fragment;
+ int len;
+ va_list args_for_counting;
+ unsigned long flags;
+
+ /* Make a copy because `vsnprintf` could change it */
+ va_copy(args_for_counting, args);
+
+ /* Need space for null byte. */
+ len = vsnprintf(NULL, 0, fmt, args_for_counting) + 1;
+
+ va_end(args_for_counting);
+
+ fragment = kmalloc(sizeof(*fragment), GFP_KERNEL);
+ if (!fragment)
+ return -ENOMEM;
+
+ fragment->fragment = kmalloc(len, GFP_KERNEL);
+ if (!fragment->fragment) {
+ kfree(fragment);
+ return -ENOMEM;
+ }
+
+ len = vsnprintf(fragment->fragment, len, fmt, args);
+ spin_lock_irqsave(&this->lock, flags);
+ this->length += len;
+ list_add_tail(&fragment->node, &this->fragments);
+ spin_unlock_irqrestore(&this->lock, flags);
+ return 0;
+}
+
+int string_stream_add(struct string_stream *this, const char *fmt, ...)
+{
+ va_list args;
+ int result;
+
+ va_start(args, fmt);
+ result = string_stream_vadd(this, fmt, args);
+ va_end(args);
+ return result;
+}
+
+void string_stream_clear(struct string_stream *this)
+{
+ struct string_stream_fragment *fragment, *fragment_safe;
+ unsigned long flags;
+
+ spin_lock_irqsave(&this->lock, flags);
+ list_for_each_entry_safe(fragment,
+ fragment_safe,
+ &this->fragments,
+ node) {
+ list_del(&fragment->node);
+ kfree(fragment->fragment);
+ kfree(fragment);
+ }
+ this->length = 0;
+ spin_unlock_irqrestore(&this->lock, flags);
+}
+
+char *string_stream_get_string(struct string_stream *this)
+{
+ struct string_stream_fragment *fragment;
+ size_t buf_len = this->length + 1; /* +1 for null byte. */
+ char *buf;
+ unsigned long flags;
+
+ buf = kzalloc(buf_len, GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ spin_lock_irqsave(&this->lock, flags);
+ list_for_each_entry(fragment, &this->fragments, node)
+ strlcat(buf, fragment->fragment, buf_len);
+ spin_unlock_irqrestore(&this->lock, flags);
+
+ return buf;
+}
+
+bool string_stream_is_empty(struct string_stream *this)
+{
+ bool is_empty;
+ unsigned long flags;
+
+ spin_lock_irqsave(&this->lock, flags);
+ is_empty = list_empty(&this->fragments);
+ spin_unlock_irqrestore(&this->lock, flags);
+
+ return is_empty;
+}
+
+void destroy_string_stream(struct string_stream *stream)
+{
+ string_stream_clear(stream);
+ kfree(stream);
+}
+
+static void string_stream_destroy(struct kref *kref)
+{
+ struct string_stream *stream = container_of(kref,
+ struct string_stream,
+ refcount);
+ destroy_string_stream(stream);
+}
+
+struct string_stream *new_string_stream(void)
+{
+ struct string_stream *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+
+ if (!stream)
+ return NULL;
+
+ INIT_LIST_HEAD(&stream->fragments);
+ spin_lock_init(&stream->lock);
+ kref_init(&stream->refcount);
+ return stream;
+}
+
+void string_stream_get(struct string_stream *stream)
+{
+ kref_get(&stream->refcount);
+}
+
+int string_stream_put(struct string_stream *stream)
+{
+ return kref_put(&stream->refcount, &string_stream_destroy);
+}
+
--
2.21.0.392.gf8f6787159e-goog
A lot of the expectation and assertion infrastructure prints out fairly
complicated test failure messages, so add a C++ style log library for
for logging test results.
Signed-off-by: Brendan Higgins <[email protected]>
---
include/kunit/kunit-stream.h | 85 ++++++++++++++++++++
include/kunit/test.h | 2 +
kunit/Makefile | 3 +-
kunit/kunit-stream.c | 149 +++++++++++++++++++++++++++++++++++
kunit/test.c | 8 ++
5 files changed, 246 insertions(+), 1 deletion(-)
create mode 100644 include/kunit/kunit-stream.h
create mode 100644 kunit/kunit-stream.c
diff --git a/include/kunit/kunit-stream.h b/include/kunit/kunit-stream.h
new file mode 100644
index 0000000000000..d457a54fe0100
--- /dev/null
+++ b/include/kunit/kunit-stream.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * C++ stream style string formatter and printer used in KUnit for outputting
+ * KUnit messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#ifndef _KUNIT_KUNIT_STREAM_H
+#define _KUNIT_KUNIT_STREAM_H
+
+#include <linux/types.h>
+#include <kunit/string-stream.h>
+
+struct kunit;
+
+/**
+ * struct kunit_stream - a std::stream style string builder.
+ *
+ * A std::stream style string builder. Allows messages to be built up and
+ * printed all at once.
+ */
+struct kunit_stream {
+ /* private: internal use only. */
+ struct kunit *test;
+ spinlock_t lock; /* Guards level. */
+ const char *level;
+ struct string_stream *internal_stream;
+};
+
+/**
+ * kunit_new_stream() - constructs a new &struct kunit_stream.
+ * @test: The test context object.
+ *
+ * Constructs a new test managed &struct kunit_stream.
+ */
+struct kunit_stream *kunit_new_stream(struct kunit *test);
+
+/**
+ * kunit_stream_set_level(): sets the level that string should be printed at.
+ * @this: the stream being operated on.
+ * @level: the print level the stream is set to output to.
+ *
+ * Sets the print level at which the stream outputs.
+ */
+void kunit_stream_set_level(struct kunit_stream *this, const char *level);
+
+/**
+ * kunit_stream_add(): adds the formatted input to the internal buffer.
+ * @this: the stream being operated on.
+ * @fmt: printf style format string to append to stream.
+ *
+ * Appends the formatted string, @fmt, to the internal buffer.
+ */
+void __printf(2, 3) kunit_stream_add(struct kunit_stream *this,
+ const char *fmt, ...);
+
+/**
+ * kunit_stream_append(): appends the contents of @other to @this.
+ * @this: the stream to which @other is appended.
+ * @other: the stream whose contents are appended to @this.
+ *
+ * Appends the contents of @other to @this.
+ */
+void kunit_stream_append(struct kunit_stream *this, struct kunit_stream *other);
+
+/**
+ * kunit_stream_commit(): prints out the internal buffer to the user.
+ * @this: the stream being operated on.
+ *
+ * Outputs the contents of the internal buffer as a kunit_printk formatted
+ * output.
+ */
+void kunit_stream_commit(struct kunit_stream *this);
+
+/**
+ * kunit_stream_clear(): clears the internal buffer.
+ * @this: the stream being operated on.
+ *
+ * Clears the contents of the internal buffer.
+ */
+void kunit_stream_clear(struct kunit_stream *this);
+
+#endif /* _KUNIT_KUNIT_STREAM_H */
diff --git a/include/kunit/test.h b/include/kunit/test.h
index 819edd8db4e81..4668e8a635954 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/slab.h>
+#include <kunit/kunit-stream.h>
struct kunit_resource;
@@ -171,6 +172,7 @@ struct kunit {
void (*vprintk)(const struct kunit *test,
const char *level,
struct va_format *vaf);
+ void (*fail)(struct kunit *test, struct kunit_stream *stream);
};
int kunit_init_test(struct kunit *test, const char *name);
diff --git a/kunit/Makefile b/kunit/Makefile
index 275b565a0e81f..6ddc622ee6b1c 100644
--- a/kunit/Makefile
+++ b/kunit/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_KUNIT) += test.o \
- string-stream.o
+ string-stream.o \
+ kunit-stream.o
diff --git a/kunit/kunit-stream.c b/kunit/kunit-stream.c
new file mode 100644
index 0000000000000..93c14eec03844
--- /dev/null
+++ b/kunit/kunit-stream.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * C++ stream style string formatter and printer used in KUnit for outputting
+ * KUnit messages.
+ *
+ * Copyright (C) 2019, Google LLC.
+ * Author: Brendan Higgins <[email protected]>
+ */
+
+#include <kunit/test.h>
+#include <kunit/kunit-stream.h>
+#include <kunit/string-stream.h>
+
+const char *kunit_stream_get_level(struct kunit_stream *this)
+{
+ unsigned long flags;
+ const char *level;
+
+ spin_lock_irqsave(&this->lock, flags);
+ level = this->level;
+ spin_unlock_irqrestore(&this->lock, flags);
+
+ return level;
+}
+
+void kunit_stream_set_level(struct kunit_stream *this, const char *level)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&this->lock, flags);
+ this->level = level;
+ spin_unlock_irqrestore(&this->lock, flags);
+}
+
+void kunit_stream_add(struct kunit_stream *this, const char *fmt, ...)
+{
+ va_list args;
+ struct string_stream *stream = this->internal_stream;
+
+ va_start(args, fmt);
+
+ if (string_stream_vadd(stream, fmt, args) < 0)
+ kunit_err(this->test, "Failed to allocate fragment: %s\n", fmt);
+
+ va_end(args);
+}
+
+void kunit_stream_append(struct kunit_stream *this,
+ struct kunit_stream *other)
+{
+ struct string_stream *other_stream = other->internal_stream;
+ const char *other_content;
+
+ other_content = string_stream_get_string(other_stream);
+
+ if (!other_content) {
+ kunit_err(this->test,
+ "Failed to get string from second argument for appending.\n");
+ return;
+ }
+
+ kunit_stream_add(this, other_content);
+}
+
+void kunit_stream_clear(struct kunit_stream *this)
+{
+ string_stream_clear(this->internal_stream);
+}
+
+void kunit_stream_commit(struct kunit_stream *this)
+{
+ struct string_stream *stream = this->internal_stream;
+ struct string_stream_fragment *fragment;
+ const char *level;
+ char *buf;
+
+ level = kunit_stream_get_level(this);
+ if (!level) {
+ kunit_err(this->test,
+ "Stream was committed without a specified log level.\n");
+ level = KERN_ERR;
+ kunit_stream_set_level(this, level);
+ }
+
+ buf = string_stream_get_string(stream);
+ if (!buf) {
+ kunit_err(this->test,
+ "Could not allocate buffer, dumping stream:\n");
+ list_for_each_entry(fragment, &stream->fragments, node) {
+ kunit_err(this->test, fragment->fragment);
+ }
+ kunit_err(this->test, "\n");
+ goto cleanup;
+ }
+
+ kunit_printk(level, this->test, buf);
+ kfree(buf);
+
+cleanup:
+ kunit_stream_clear(this);
+}
+
+static int kunit_stream_init(struct kunit_resource *res, void *context)
+{
+ struct kunit *test = context;
+ struct kunit_stream *stream;
+
+ stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+ if (!stream)
+ return -ENOMEM;
+ res->allocation = stream;
+ stream->test = test;
+ spin_lock_init(&stream->lock);
+ stream->internal_stream = new_string_stream();
+
+ if (!stream->internal_stream)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void kunit_stream_free(struct kunit_resource *res)
+{
+ struct kunit_stream *stream = res->allocation;
+
+ if (!string_stream_is_empty(stream->internal_stream)) {
+ kunit_err(stream->test,
+ "End of test case reached with uncommitted stream entries.\n");
+ kunit_stream_commit(stream);
+ }
+
+ destroy_string_stream(stream->internal_stream);
+ kfree(stream);
+}
+
+struct kunit_stream *kunit_new_stream(struct kunit *test)
+{
+ struct kunit_resource *res;
+
+ res = kunit_alloc_resource(test,
+ kunit_stream_init,
+ kunit_stream_free,
+ test);
+
+ if (res)
+ return res->allocation;
+ else
+ return NULL;
+}
diff --git a/kunit/test.c b/kunit/test.c
index 541f9adb1608c..f7575b127e2df 100644
--- a/kunit/test.c
+++ b/kunit/test.c
@@ -63,12 +63,20 @@ static void kunit_vprintk(const struct kunit *test,
"kunit %s: %pV", test->name, vaf);
}
+static void kunit_fail(struct kunit *test, struct kunit_stream *stream)
+{
+ kunit_set_success(test, false);
+ kunit_stream_set_level(stream, KERN_ERR);
+ kunit_stream_commit(stream);
+}
+
int kunit_init_test(struct kunit *test, const char *name)
{
spin_lock_init(&test->lock);
INIT_LIST_HEAD(&test->resources);
test->name = name;
test->vprintk = kunit_vprintk;
+ test->fail = kunit_fail;
return 0;
}
--
2.21.0.392.gf8f6787159e-goog
Add documentation for KUnit, the Linux kernel unit testing framework.
- Add intro and usage guide for KUnit
- Add API reference
Signed-off-by: Felix Guo <[email protected]>
Signed-off-by: Brendan Higgins <[email protected]>
---
Documentation/index.rst | 1 +
Documentation/kunit/api/index.rst | 16 ++
Documentation/kunit/api/test.rst | 15 +
Documentation/kunit/faq.rst | 46 +++
Documentation/kunit/index.rst | 80 ++++++
Documentation/kunit/start.rst | 180 ++++++++++++
Documentation/kunit/usage.rst | 447 ++++++++++++++++++++++++++++++
7 files changed, 785 insertions(+)
create mode 100644 Documentation/kunit/api/index.rst
create mode 100644 Documentation/kunit/api/test.rst
create mode 100644 Documentation/kunit/faq.rst
create mode 100644 Documentation/kunit/index.rst
create mode 100644 Documentation/kunit/start.rst
create mode 100644 Documentation/kunit/usage.rst
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 80a421cb935e7..264cfd613a774 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -65,6 +65,7 @@ merged much easier.
kernel-hacking/index
trace/index
maintainer/index
+ kunit/index
Kernel API documentation
------------------------
diff --git a/Documentation/kunit/api/index.rst b/Documentation/kunit/api/index.rst
new file mode 100644
index 0000000000000..c31c530088153
--- /dev/null
+++ b/Documentation/kunit/api/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+API Reference
+=============
+.. toctree::
+
+ test
+
+This section documents the KUnit kernel testing API. It is divided into 3
+sections:
+
+================================= ==============================================
+:doc:`test` documents all of the standard testing API
+ excluding mocking or mocking related features.
+================================= ==============================================
diff --git a/Documentation/kunit/api/test.rst b/Documentation/kunit/api/test.rst
new file mode 100644
index 0000000000000..7c926014f047c
--- /dev/null
+++ b/Documentation/kunit/api/test.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
+Test API
+========
+
+This file documents all of the standard testing API excluding mocking or mocking
+related features.
+
+.. kernel-doc:: include/kunit/test.h
+ :internal:
+
+.. kernel-doc:: include/kunit/kunit-stream.h
+ :internal:
+
diff --git a/Documentation/kunit/faq.rst b/Documentation/kunit/faq.rst
new file mode 100644
index 0000000000000..cb8e4fb2257a0
--- /dev/null
+++ b/Documentation/kunit/faq.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Frequently Asked Questions
+=========================================
+
+How is this different from Autotest, kselftest, etc?
+====================================================
+KUnit is a unit testing framework. Autotest, kselftest (and some others) are
+not.
+
+A `unit test <https://martinfowler.com/bliki/UnitTest.html>`_ is supposed to
+test a single unit of code in isolation, hence the name. A unit test should be
+the finest granularity of testing and as such should allow all possible code
+paths to be tested in the code under test; this is only possible if the code
+under test is very small and does not have any external dependencies outside of
+the test's control like hardware.
+
+There are no testing frameworks currently available for the kernel that do not
+require installing the kernel on a test machine or in a VM and all require
+tests to be written in userspace and run on the kernel under test; this is true
+for Autotest, kselftest, and some others, disqualifying any of them from being
+considered unit testing frameworks.
+
+What is the difference between a unit test and these other kinds of tests?
+==========================================================================
+Most existing tests for the Linux kernel would be categorized as an integration
+test, or an end-to-end test.
+
+- A unit test is supposed to test a single unit of code in isolation, hence the
+ name. A unit test should be the finest granularity of testing and as such
+ should allow all possible code paths to be tested in the code under test; this
+ is only possible if the code under test is very small and does not have any
+ external dependencies outside of the test's control like hardware.
+- An integration test tests the interaction between a minimal set of components,
+ usually just two or three. For example, someone might write an integration
+ test to test the interaction between a driver and a piece of hardware, or to
+ test the interaction between the userspace libraries the kernel provides and
+ the kernel itself; however, one of these tests would probably not test the
+ entire kernel along with hardware interactions and interactions with the
+ userspace.
+- An end-to-end test usually tests the entire system from the perspective of the
+ code under test. For example, someone might write an end-to-end test for the
+ kernel by installing a production configuration of the kernel on production
+ hardware with a production userspace and then trying to exercise some behavior
+ that depends on interactions between the hardware, the kernel, and userspace.
diff --git a/Documentation/kunit/index.rst b/Documentation/kunit/index.rst
new file mode 100644
index 0000000000000..c6710211b647f
--- /dev/null
+++ b/Documentation/kunit/index.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+KUnit - Unit Testing for the Linux Kernel
+=========================================
+
+.. toctree::
+ :maxdepth: 2
+
+ start
+ usage
+ api/index
+ faq
+
+What is KUnit?
+==============
+
+KUnit is a lightweight unit testing and mocking framework for the Linux kernel.
+These tests are able to be run locally on a developer's workstation without a VM
+or special hardware.
+
+KUnit is heavily inspired by JUnit, Python's unittest.mock, and
+Googletest/Googlemock for C++. KUnit provides facilities for defining unit test
+cases, grouping related test cases into test suites, providing common
+infrastructure for running tests, and much more.
+
+Get started now: :doc:`start`
+
+Why KUnit?
+==========
+
+A unit test is supposed to test a single unit of code in isolation, hence the
+name. A unit test should be the finest granularity of testing and as such should
+allow all possible code paths to be tested in the code under test; this is only
+possible if the code under test is very small and does not have any external
+dependencies outside of the test's control like hardware.
+
+Outside of KUnit, there are no testing frameworks currently
+available for the kernel that do not require installing the kernel on a test
+machine or in a VM and all require tests to be written in userspace running on
+the kernel; this is true for Autotest, and kselftest, disqualifying
+any of them from being considered unit testing frameworks.
+
+KUnit addresses the problem of being able to run tests without needing a virtual
+machine or actual hardware with User Mode Linux. User Mode Linux is a Linux
+architecture, like ARM or x86; however, unlike other architectures it compiles
+to a standalone program that can be run like any other program directly inside
+of a host operating system; to be clear, it does not require any virtualization
+support; it is just a regular program.
+
+KUnit is fast. Excluding build time, from invocation to completion KUnit can run
+several dozen tests in only 10 to 20 seconds; this might not sound like a big
+deal to some people, but having such fast and easy to run tests fundamentally
+changes the way you go about testing and even writing code in the first place.
+Linus himself said in his `git talk at Google
+<https://gist.github.com/lorn/1272686/revisions#diff-53c65572127855f1b003db4064a94573R874>`_:
+
+ "... a lot of people seem to think that performance is about doing the
+ same thing, just doing it faster, and that is not true. That is not what
+ performance is all about. If you can do something really fast, really
+ well, people will start using it differently."
+
+In this context Linus was talking about branching and merging,
+but this point also applies to testing. If your tests are slow, unreliable, are
+difficult to write, and require a special setup or special hardware to run,
+then you wait a lot longer to write tests, and you wait a lot longer to run
+tests; this means that tests are likely to break, unlikely to test a lot of
+things, and are unlikely to be rerun once they pass. If your tests are really
+fast, you run them all the time, every time you make a change, and every time
+someone sends you some code. Why trust that someone ran all their tests
+correctly on every change when you can just run them yourself in less time than
+it takes to read his / her test log?
+
+How do I use it?
+===================
+
+* :doc:`start` - for new users of KUnit
+* :doc:`usage` - for a more detailed explanation of KUnit features
+* :doc:`api/index` - for the list of KUnit APIs used for testing
+
diff --git a/Documentation/kunit/start.rst b/Documentation/kunit/start.rst
new file mode 100644
index 0000000000000..5cdba5091905e
--- /dev/null
+++ b/Documentation/kunit/start.rst
@@ -0,0 +1,180 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Getting Started
+===============
+
+Installing dependencies
+=======================
+KUnit has the same dependencies as the Linux kernel. As long as you can build
+the kernel, you can run KUnit.
+
+KUnit Wrapper
+=============
+Included with KUnit is a simple Python wrapper that helps format the output to
+easily use and read KUnit output. It handles building and running the kernel, as
+well as formatting the output.
+
+The wrapper can be run with:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py
+
+Creating a kunitconfig
+======================
+The Python script is a thin wrapper around Kbuild as such, it needs to be
+configured with a ``kunitconfig`` file. This file essentially contains the
+regular Kernel config, with the specific test targets as well.
+
+.. code-block:: bash
+
+ git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO
+ cd $PATH_TO_LINUX_REPO
+ ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig
+
+You may want to add kunitconfig to your local gitignore.
+
+Verifying KUnit Works
+-------------------------
+
+To make sure that everything is set up correctly, simply invoke the Python
+wrapper from your kernel repo:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py
+
+.. note::
+ You may want to run ``make mrproper`` first.
+
+If everything worked correctly, you should see the following:
+
+.. code-block:: bash
+
+ Generating .config ...
+ Building KUnit Kernel ...
+ Starting KUnit Kernel ...
+
+followed by a list of tests that are run. All of them should be passing.
+
+.. note::
+ Because it is building a lot of sources for the first time, the ``Building
+ kunit kernel`` step may take a while.
+
+Writing your first test
+==========================
+
+In your kernel repo let's add some code that we can test. Create a file
+``drivers/misc/example.h`` with the contents:
+
+.. code-block:: c
+
+ int misc_example_add(int left, int right);
+
+create a file ``drivers/misc/example.c``:
+
+.. code-block:: c
+
+ #include <linux/errno.h>
+
+ #include "example.h"
+
+ int misc_example_add(int left, int right)
+ {
+ return left + right;
+ }
+
+Now add the following lines to ``drivers/misc/Kconfig``:
+
+.. code-block:: kconfig
+
+ config MISC_EXAMPLE
+ bool "My example"
+
+and the following lines to ``drivers/misc/Makefile``:
+
+.. code-block:: make
+
+ obj-$(CONFIG_MISC_EXAMPLE) += example.o
+
+Now we are ready to write the test. The test will be in
+``drivers/misc/example-test.c``:
+
+.. code-block:: c
+
+ #include <kunit/test.h>
+ #include "example.h"
+
+ /* Define the test cases. */
+
+ static void misc_example_add_test_basic(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, 1, misc_example_add(1, 0));
+ KUNIT_EXPECT_EQ(test, 2, misc_example_add(1, 1));
+ KUNIT_EXPECT_EQ(test, 0, misc_example_add(-1, 1));
+ KUNIT_EXPECT_EQ(test, INT_MAX, misc_example_add(0, INT_MAX));
+ KUNIT_EXPECT_EQ(test, -1, misc_example_add(INT_MAX, INT_MIN));
+ }
+
+ static void misc_example_test_failure(struct kunit *test)
+ {
+ KUNIT_FAIL(test, "This test never passes.");
+ }
+
+ static struct kunit_case misc_example_test_cases[] = {
+ KUNIT_CASE(misc_example_add_test_basic),
+ KUNIT_CASE(misc_example_test_failure),
+ {},
+ };
+
+ static struct kunit_module misc_example_test_module = {
+ .name = "misc-example",
+ .test_cases = misc_example_test_cases,
+ };
+ module_test(misc_example_test_module);
+
+Now add the following to ``drivers/misc/Kconfig``:
+
+.. code-block:: kconfig
+
+ config MISC_EXAMPLE_TEST
+ bool "Test for my example"
+ depends on MISC_EXAMPLE && KUNIT
+
+and the following to ``drivers/misc/Makefile``:
+
+.. code-block:: make
+
+ obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
+
+Now add it to your ``kunitconfig``:
+
+.. code-block:: none
+
+ CONFIG_MISC_EXAMPLE=y
+ CONFIG_MISC_EXAMPLE_TEST=y
+
+Now you can run the test:
+
+.. code-block:: bash
+
+ ./tools/testing/kunit/kunit.py
+
+You should see the following failure:
+
+.. code-block:: none
+
+ ...
+ [16:08:57] [PASSED] misc-example:misc_example_add_test_basic
+ [16:08:57] [FAILED] misc-example:misc_example_test_failure
+ [16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17
+ [16:08:57] This test never passes.
+ ...
+
+Congrats! You just wrote your first KUnit test!
+
+Next Steps
+=============
+* Check out the :doc:`usage` page for a more
+ in-depth explanation of KUnit.
diff --git a/Documentation/kunit/usage.rst b/Documentation/kunit/usage.rst
new file mode 100644
index 0000000000000..5c83ea9e21bc5
--- /dev/null
+++ b/Documentation/kunit/usage.rst
@@ -0,0 +1,447 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Using KUnit
+=============
+
+The purpose of this document is to describe what KUnit is, how it works, how it
+is intended to be used, and all the concepts and terminology that are needed to
+understand it. This guide assumes a working knowledge of the Linux kernel and
+some basic knowledge of testing.
+
+For a high level introduction to KUnit, including setting up KUnit for your
+project, see :doc:`start`.
+
+Organization of this document
+=================================
+
+This document is organized into two main sections: Testing and Isolating
+Behavior. The first covers what a unit test is and how to use KUnit to write
+them. The second covers how to use KUnit to isolate code and make it possible
+to unit test code that was otherwise un-unit-testable.
+
+Testing
+==========
+
+What is KUnit?
+------------------
+
+"K" is short for "kernel" so "KUnit" is the "(Linux) Kernel Unit Testing
+Framework." KUnit is intended first and foremost for writing unit tests; it is
+general enough that it can be used to write integration tests; however, this is
+a secondary goal. KUnit has no ambition of being the only testing framework for
+the kernel; for example, it does not intend to be an end-to-end testing
+framework.
+
+What is Unit Testing?
+-------------------------
+
+A `unit test <https://martinfowler.com/bliki/UnitTest.html>`_ is a test that
+tests code at the smallest possible scope, a *unit* of code. In the C
+programming language that's a function.
+
+Unit tests should be written for all the publicly exposed functions in a
+compilation unit; so that is all the functions that are exported in either a
+*class* (defined below) or all functions which are **not** static.
+
+Writing Tests
+-------------
+
+Test Cases
+~~~~~~~~~~
+
+The fundamental unit in KUnit is the test case. A test case is a function with
+the signature ``void (*)(struct kunit *test)``. It calls a function to be tested
+and then sets *expectations* for what should happen. For example:
+
+.. code-block:: c
+
+ void example_test_success(struct kunit *test)
+ {
+ }
+
+ void example_test_failure(struct kunit *test)
+ {
+ KUNIT_FAIL(test, "This test never passes.");
+ }
+
+In the above example ``example_test_success`` always passes because it does
+nothing; no expectations are set, so all expectations pass. On the other hand
+``example_test_failure`` always fails because it calls ``KUNIT_FAIL``, which is
+a special expectation that logs a message and causes the test case to fail.
+
+Expectations
+~~~~~~~~~~~~
+An *expectation* is a way to specify that you expect a piece of code to do
+something in a test. An expectation is called like a function. A test is made
+by setting expectations about the behavior of a piece of code under test; when
+one or more of the expectations fail, the test case fails and information about
+the failure is logged. For example:
+
+.. code-block:: c
+
+ void add_test_basic(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, 1, add(1, 0));
+ KUNIT_EXPECT_EQ(test, 2, add(1, 1));
+ }
+
+In the above example ``add_test_basic`` makes a number of assertions about the
+behavior of a function called ``add``; the first parameter is always of type
+``struct kunit *``, which contains information about the current test context;
+the second parameter, in this case, is what the value is expected to be; the
+last value is what the value actually is. If ``add`` passes all of these
+expectations, the test case, ``add_test_basic`` will pass; if any one of these
+expectations fail, the test case will fail.
+
+It is important to understand that a test case *fails* when any expectation is
+violated; however, the test will continue running, potentially trying other
+expectations until the test case ends or is otherwise terminated. This is as
+opposed to *assertions* which are discussed later.
+
+To learn about more expectations supported by KUnit, see :doc:`api/test`.
+
+.. note::
+ A single test case should be pretty short, pretty easy to understand,
+ focused on a single behavior.
+
+For example, if we wanted to properly test the add function above, we would
+create additional tests cases which would each test a different property that an
+add function should have like this:
+
+.. code-block:: c
+
+ void add_test_basic(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, 1, add(1, 0));
+ KUNIT_EXPECT_EQ(test, 2, add(1, 1));
+ }
+
+ void add_test_negative(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, 0, add(-1, 1));
+ }
+
+ void add_test_max(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, INT_MAX, add(0, INT_MAX));
+ KUNIT_EXPECT_EQ(test, -1, add(INT_MAX, INT_MIN));
+ }
+
+ void add_test_overflow(struct kunit *test)
+ {
+ KUNIT_EXPECT_EQ(test, INT_MIN, add(INT_MAX, 1));
+ }
+
+Notice how it is immediately obvious what all the properties that we are testing
+for are.
+
+Assertions
+~~~~~~~~~~
+
+KUnit also has the concept of an *assertion*. An assertion is just like an
+expectation except the assertion immediately terminates the test case if it is
+not satisfied.
+
+For example:
+
+.. code-block:: c
+
+ static void mock_test_do_expect_default_return(struct kunit *test)
+ {
+ struct mock_test_context *ctx = test->priv;
+ struct mock *mock = ctx->mock;
+ int param0 = 5, param1 = -5;
+ const char *two_param_types[] = {"int", "int"};
+ const void *two_params[] = {¶m0, ¶m1};
+ const void *ret;
+
+ ret = mock->do_expect(mock,
+ "test_printk", test_printk,
+ two_param_types, two_params,
+ ARRAY_SIZE(two_params));
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ret);
+ KUNIT_EXPECT_EQ(test, -4, *((int *) ret));
+ }
+
+In this example, the method under test should return a pointer to a value, so
+if the pointer returned by the method is null or an errno, we don't want to
+bother continuing the test since the following expectation could crash the test
+case. `ASSERT_NOT_ERR_OR_NULL(...)` allows us to bail out of the test case if
+the appropriate conditions have not been satisfied to complete the test.
+
+Modules / Test Suites
+~~~~~~~~~~~~~~~~~~~~~
+
+Now obviously one unit test isn't very helpful; the power comes from having
+many test cases covering all of your behaviors. Consequently it is common to
+have many *similar* tests; in order to reduce duplication in these closely
+related tests most unit testing frameworks provide the concept of a *test
+suite*, in KUnit we call it a *test module*; all it is is just a collection of
+test cases for a unit of code with a set up function that gets invoked before
+every test cases and then a tear down function that gets invoked after every
+test case completes.
+
+Example:
+
+.. code-block:: c
+
+ static struct kunit_case example_test_cases[] = {
+ KUNIT_CASE(example_test_foo),
+ KUNIT_CASE(example_test_bar),
+ KUNIT_CASE(example_test_baz),
+ {},
+ };
+
+ static struct kunit_module example_test_module = {
+ .name = "example",
+ .init = example_test_init,
+ .exit = example_test_exit,
+ .test_cases = example_test_cases,
+ };
+ module_test(example_test_module);
+
+In the above example the test suite, ``example_test_module``, would run the test
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``, each
+would have ``example_test_init`` called immediately before it and would have
+``example_test_exit`` called immediately after it.
+``module_test(example_test_module)`` registers the test suite with the KUnit
+test framework.
+
+.. note::
+ A test case will only be run if it is associated with a test suite.
+
+For a more information on these types of things see the :doc:`api/test`.
+
+Isolating Behavior
+==================
+
+The most important aspect of unit testing that other forms of testing do not
+provide is the ability to limit the amount of code under test to a single unit.
+In practice, this is only possible by being able to control what code gets run
+when the unit under test calls a function and this is usually accomplished
+through some sort of indirection where a function is exposed as part of an API
+such that the definition of that function can be changed without affecting the
+rest of the code base. In the kernel this primarily comes from two constructs,
+classes, structs that contain function pointers that are provided by the
+implementer, and architecture specific functions which have definitions selected
+at compile time.
+
+Classes
+-------
+
+Classes are not a construct that is built into the C programming language;
+however, it is an easily derived concept. Accordingly, pretty much every project
+that does not use a standardized object oriented library (like GNOME's GObject)
+has their own slightly different way of doing object oriented programming; the
+Linux kernel is no exception.
+
+The central concept in kernel object oriented programming is the class. In the
+kernel, a *class* is a struct that contains function pointers. This creates a
+contract between *implementers* and *users* since it forces them to use the
+same function signature without having to call the function directly. In order
+for it to truly be a class, the function pointers must specify that a pointer
+to the class, known as a *class handle*, be one of the parameters; this makes
+it possible for the member functions (also known as *methods*) to have access
+to member variables (more commonly known as *fields*) allowing the same
+implementation to have multiple *instances*.
+
+Typically a class can be *overridden* by *child classes* by embedding the
+*parent class* in the child class. Then when a method provided by the child
+class is called, the child implementation knows that the pointer passed to it is
+of a parent contained within the child; because of this, the child can compute
+the pointer to itself because the pointer to the parent is always a fixed offset
+from the pointer to the child; this offset is the offset of the parent contained
+in the child struct. For example:
+
+.. code-block:: c
+
+ struct shape {
+ int (*area)(struct shape *this);
+ };
+
+ struct rectangle {
+ struct shape parent;
+ int length;
+ int width;
+ };
+
+ int rectangle_area(struct shape *this)
+ {
+ struct rectangle *self = container_of(this, struct shape, parent);
+
+ return self->length * self->width;
+ };
+
+ void rectangle_new(struct rectangle *self, int length, int width)
+ {
+ self->parent.area = rectangle_area;
+ self->length = length;
+ self->width = width;
+ }
+
+In this example (as in most kernel code) the operation of computing the pointer
+to the child from the pointer to the parent is done by ``container_of``.
+
+Faking Classes
+~~~~~~~~~~~~~~
+
+In order to unit test a piece of code that calls a method in a class, the
+behavior of the method must be controllable, otherwise the test ceases to be a
+unit test and becomes an integration test.
+
+A fake just provides an implementation of a piece of code that is different than
+what runs in a production instance, but behaves identically from the standpoint
+of the callers; this is usually done to replace a dependency that is hard to
+deal with, or is slow.
+
+A good example for this might be implementing a fake EEPROM that just stores the
+"contents" in an internal buffer. For example, let's assume we have a class that
+represents an EEPROM:
+
+.. code-block:: c
+
+ struct eeprom {
+ ssize_t (*read)(struct eeprom *this, size_t offset, char *buffer, size_t count);
+ ssize_t (*write)(struct eeprom *this, size_t offset, const char *buffer, size_t count);
+ };
+
+And we want to test some code that buffers writes to the EEPROM:
+
+.. code-block:: c
+
+ struct eeprom_buffer {
+ ssize_t (*write)(struct eeprom_buffer *this, const char *buffer, size_t count);
+ int flush(struct eeprom_buffer *this);
+ size_t flush_count; /* Flushes when buffer exceeds flush_count. */
+ };
+
+ struct eeprom_buffer *new_eeprom_buffer(struct eeprom *eeprom);
+ void destroy_eeprom_buffer(struct eeprom *eeprom);
+
+We can easily test this code by *faking out* the underlying EEPROM:
+
+.. code-block:: c
+
+ struct fake_eeprom {
+ struct eeprom parent;
+ char contents[FAKE_EEPROM_CONTENTS_SIZE];
+ };
+
+ ssize_t fake_eeprom_read(struct eeprom *parent, size_t offset, char *buffer, size_t count)
+ {
+ struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent);
+
+ count = min(count, FAKE_EEPROM_CONTENTS_SIZE - offset);
+ memcpy(buffer, this->contents + offset, count);
+
+ return count;
+ }
+
+ ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count)
+ {
+ struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent);
+
+ count = min(count, FAKE_EEPROM_CONTENTS_SIZE - offset);
+ memcpy(this->contents + offset, buffer, count);
+
+ return count;
+ }
+
+ void fake_eeprom_init(struct fake_eeprom *this)
+ {
+ this->parent.read = fake_eeprom_read;
+ this->parent.write = fake_eeprom_write;
+ memset(this->contents, 0, FAKE_EEPROM_CONTENTS_SIZE);
+ }
+
+We can now use it to test ``struct eeprom_buffer``:
+
+.. code-block:: c
+
+ struct eeprom_buffer_test {
+ struct fake_eeprom *fake_eeprom;
+ struct eeprom_buffer *eeprom_buffer;
+ };
+
+ static void eeprom_buffer_test_does_not_write_until_flush(struct kunit *test)
+ {
+ struct eeprom_buffer_test *ctx = test->priv;
+ struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer;
+ struct fake_eeprom *fake_eeprom = ctx->fake_eeprom;
+ char buffer[] = {0xff};
+
+ eeprom_buffer->flush_count = SIZE_MAX;
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 1);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0);
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 1);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0);
+
+ eeprom_buffer->flush(eeprom_buffer);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff);
+ }
+
+ static void eeprom_buffer_test_flushes_after_flush_count_met(struct kunit *test)
+ {
+ struct eeprom_buffer_test *ctx = test->priv;
+ struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer;
+ struct fake_eeprom *fake_eeprom = ctx->fake_eeprom;
+ char buffer[] = {0xff};
+
+ eeprom_buffer->flush_count = 2;
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 1);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0);
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 1);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff);
+ }
+
+ static void eeprom_buffer_test_flushes_increments_of_flush_count(struct kunit *test)
+ {
+ struct eeprom_buffer_test *ctx = test->priv;
+ struct eeprom_buffer *eeprom_buffer = ctx->eeprom_buffer;
+ struct fake_eeprom *fake_eeprom = ctx->fake_eeprom;
+ char buffer[] = {0xff, 0xff};
+
+ eeprom_buffer->flush_count = 2;
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 1);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0);
+
+ eeprom_buffer->write(eeprom_buffer, buffer, 2);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[0], 0xff);
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[1], 0xff);
+ /* Should have only flushed the first two bytes. */
+ KUNIT_EXPECT_EQ(test, fake_eeprom->contents[2], 0);
+ }
+
+ static int eeprom_buffer_test_init(struct kunit *test)
+ {
+ struct eeprom_buffer_test *ctx;
+
+ ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ ctx->fake_eeprom = kunit_kzalloc(test, sizeof(*ctx->fake_eeprom), GFP_KERNEL);
+ ASSERT_NOT_ERR_OR_NULL(test, ctx->fake_eeprom);
+
+ ctx->eeprom_buffer = new_eeprom_buffer(&ctx->fake_eeprom->parent);
+ ASSERT_NOT_ERR_OR_NULL(test, ctx->eeprom_buffer);
+
+ test->priv = ctx;
+
+ return 0;
+ }
+
+ static void eeprom_buffer_test_exit(struct kunit *test)
+ {
+ struct eeprom_buffer_test *ctx = test->priv;
+
+ destroy_eeprom_buffer(ctx->eeprom_buffer);
+ }
+
--
2.21.0.392.gf8f6787159e-goog
Hi Brendan,
KUNIT_ASSERT_NOT_ERR_OR_NULL() should be replaced to
KUNIT_EXPECT_NOT_ERR_OR_NULL(), right?
On Thu, Apr 04, 2019 at 03:06:49PM -0700, Brendan Higgins wrote:
> Add documentation for KUnit, the Linux kernel unit testing framework.
> - Add intro and usage guide for KUnit
> - Add API reference
>
> Signed-off-by: Felix Guo <[email protected]>
> Signed-off-by: Brendan Higgins <[email protected]>
> ---
<snip>
> diff --git a/Documentation/kunit/start.rst b/Documentation/kunit/start.rst
> new file mode 100644
> index 0000000000000..5cdba5091905e
> --- /dev/null
> +++ b/Documentation/kunit/start.rst
<snip>
> +Assertions
> +~~~~~~~~~~
> +
> +KUnit also has the concept of an *assertion*. An assertion is just like an
> +expectation except the assertion immediately terminates the test case if it is
> +not satisfied.
> +
> +For example:
> +
> +.. code-block:: c
> +
> + static void mock_test_do_expect_default_return(struct kunit *test)
> + {
> + struct mock_test_context *ctx = test->priv;
> + struct mock *mock = ctx->mock;
> + int param0 = 5, param1 = -5;
> + const char *two_param_types[] = {"int", "int"};
> + const void *two_params[] = {¶m0, ¶m1};
> + const void *ret;
> +
> + ret = mock->do_expect(mock,
> + "test_printk", test_printk,
> + two_param_types, two_params,
> + ARRAY_SIZE(two_params));
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ret);
KUNIT_EXPECT_NOT_ERR_OR_NULL(test, ret);
> + KUNIT_EXPECT_EQ(test, -4, *((int *) ret));
> + }
> +
> +In this example, the method under test should return a pointer to a value, so
> +if the pointer returned by the method is null or an errno, we don't want to
> +bother continuing the test since the following expectation could crash the test
> +case. `ASSERT_NOT_ERR_OR_NULL(...)` allows us to bail out of the test case if
+case. `KUNIT_EXPECT_NOT_ERR_OR_NULL(...)` allows us to bail out of the test case if
Thanks!
Masa
On Thu, Apr 04, 2019 at 03:06:46PM -0700, Brendan Higgins wrote:
> From: Avinash Kondareddy <[email protected]>
>
> Tests how tests interact with test managed resources in their lifetime.
>
> Signed-off-by: Avinash Kondareddy <[email protected]>
> Signed-off-by: Brendan Higgins <[email protected]>
> ---
> kunit/test-test.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 122 insertions(+)
>
> diff --git a/kunit/test-test.c b/kunit/test-test.c
> index 4bd7a34d0a6cb..54add8ca418a0 100644
> --- a/kunit/test-test.c
> +++ b/kunit/test-test.c
> @@ -135,3 +135,125 @@ static struct kunit_module kunit_try_catch_test_module = {
> .test_cases = kunit_try_catch_test_cases,
> };
> module_test(kunit_try_catch_test_module);
> +
> +/*
> + * Context for testing test managed resources
> + * is_resource_initialized is used to test arbitrary resources
> + */
> +struct kunit_test_resource_context {
> + struct kunit test;
> + bool is_resource_initialized;
> +};
> +
> +static int fake_resource_init(struct kunit_resource *res, void *context)
> +{
> + struct kunit_test_resource_context *ctx = context;
> +
> + res->allocation = &ctx->is_resource_initialized;
> + ctx->is_resource_initialized = true;
> + return 0;
> +}
> +
> +static void fake_resource_free(struct kunit_resource *res)
> +{
> + bool *is_resource_initialized = res->allocation;
> +
> + *is_resource_initialized = false;
> +}
> +
> +static void kunit_resource_test_init_resources(struct kunit *test)
> +{
> + struct kunit_test_resource_context *ctx = test->priv;
> +
> + kunit_init_test(&ctx->test, "testing_test_init_test");
> +
> + KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
> +}
> +
> +static void kunit_resource_test_alloc_resource(struct kunit *test)
> +{
> + struct kunit_test_resource_context *ctx = test->priv;
> + struct kunit_resource *res;
> + kunit_resource_free_t free = fake_resource_free;
> +
> + res = kunit_alloc_resource(&ctx->test,
> + fake_resource_init,
> + fake_resource_free,
> + ctx);
> +
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, res);
KUNIT_EXPECT_NOT_ERR_OR_NULL(test, res);
Thanks!
Masa
On Wed, Apr 24, 2019 at 11:58 AM Masayoshi Mizuma <[email protected]> wrote:
>
> Hi Brendan,
>
> KUNIT_ASSERT_NOT_ERR_OR_NULL() should be replaced to
> KUNIT_EXPECT_NOT_ERR_OR_NULL(), right?
Generally speaking, no.
There may be places that I have used it improperly, but I think it is
generally okay to use.
If you are refering to the discussion with Frank and Stephen in RFC
v4, my take was that the resolution was that there were some things I
needed to fix in its implementation, but it is conceptually okay, and
that Frank doesn't want me to use it in drivers/of/unittest.c.
Consequently, I fixed the implementation issues that Frank and Stephen
pointed out, and I am holding off on drivers/of/unittest.c for this
patchset. The usage in this file should be fine.
>
> On Thu, Apr 04, 2019 at 03:06:49PM -0700, Brendan Higgins wrote:
> > Add documentation for KUnit, the Linux kernel unit testing framework.
> > - Add intro and usage guide for KUnit
> > - Add API reference
> >
> > Signed-off-by: Felix Guo <[email protected]>
> > Signed-off-by: Brendan Higgins <[email protected]>
> > ---
>
> <snip>
<snip>
Cheers
On Wed, Apr 24, 2019 at 12:00 PM Masayoshi Mizuma <[email protected]> wrote:
>
> On Thu, Apr 04, 2019 at 03:06:46PM -0700, Brendan Higgins wrote:
> > From: Avinash Kondareddy <[email protected]>
> >
> > Tests how tests interact with test managed resources in their lifetime.
> >
> > Signed-off-by: Avinash Kondareddy <[email protected]>
> > Signed-off-by: Brendan Higgins <[email protected]>
> > ---
> > kunit/test-test.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 122 insertions(+)
> >
> > diff --git a/kunit/test-test.c b/kunit/test-test.c
> > index 4bd7a34d0a6cb..54add8ca418a0 100644
> > --- a/kunit/test-test.c
> > +++ b/kunit/test-test.c
> > @@ -135,3 +135,125 @@ static struct kunit_module kunit_try_catch_test_module = {
> > .test_cases = kunit_try_catch_test_cases,
> > };
> > module_test(kunit_try_catch_test_module);
> > +
> > +/*
> > + * Context for testing test managed resources
> > + * is_resource_initialized is used to test arbitrary resources
> > + */
> > +struct kunit_test_resource_context {
> > + struct kunit test;
> > + bool is_resource_initialized;
> > +};
> > +
> > +static int fake_resource_init(struct kunit_resource *res, void *context)
> > +{
> > + struct kunit_test_resource_context *ctx = context;
> > +
> > + res->allocation = &ctx->is_resource_initialized;
> > + ctx->is_resource_initialized = true;
> > + return 0;
> > +}
> > +
> > +static void fake_resource_free(struct kunit_resource *res)
> > +{
> > + bool *is_resource_initialized = res->allocation;
> > +
> > + *is_resource_initialized = false;
> > +}
> > +
> > +static void kunit_resource_test_init_resources(struct kunit *test)
> > +{
> > + struct kunit_test_resource_context *ctx = test->priv;
> > +
> > + kunit_init_test(&ctx->test, "testing_test_init_test");
> > +
> > + KUNIT_EXPECT_TRUE(test, list_empty(&ctx->test.resources));
> > +}
> > +
> > +static void kunit_resource_test_alloc_resource(struct kunit *test)
> > +{
> > + struct kunit_test_resource_context *ctx = test->priv;
> > + struct kunit_resource *res;
> > + kunit_resource_free_t free = fake_resource_free;
> > +
> > + res = kunit_alloc_resource(&ctx->test,
> > + fake_resource_init,
> > + fake_resource_free,
> > + ctx);
> > +
>
> > + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, res);
>
> KUNIT_EXPECT_NOT_ERR_OR_NULL(test, res);
See my reply to your email on the 14/17 patch.