These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 83dba3fbfe0c..6b9a3463f1fd 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -510,7 +510,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+static const struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -522,7 +522,7 @@ static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_volt_ops = {
+static const struct regulator_ops ab8500_regulator_volt_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -531,7 +531,7 @@ static struct regulator_ops ab8500_regulator_volt_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_mode_ops = {
+static const struct regulator_ops ab8500_regulator_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -541,14 +541,14 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_ops = {
+static const struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
+static const struct regulator_ops ab8500_regulator_anamic_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
--
2.17.1
Current code is using devm_regulator_register() so we don't need to save
*regulator for clean up, use a local variable instead.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 6b9a3463f1fd..3fcb4cbaab02 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -44,7 +44,6 @@ struct ab8500_shared_mode {
* struct ab8500_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
- * @regulator_dev: regulator device
* @shared_mode: used when mode is shared between two regulators
* @load_lp_uA: maximum load in idle (low power) mode
* @update_bank: bank to control on/off
@@ -65,7 +64,6 @@ struct ab8500_shared_mode {
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
- struct regulator_dev *regulator;
struct ab8500_shared_mode *shared_mode;
int load_lp_uA;
u8 update_bank;
@@ -1600,6 +1598,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
+ struct regulator_dev *rdev;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
@@ -1621,12 +1620,11 @@ static int ab8500_regulator_register(struct platform_device *pdev,
}
/* register regulator with framework */
- info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
- &config);
- if (IS_ERR(info->regulator)) {
+ rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
- return PTR_ERR(info->regulator);
+ return PTR_ERR(rdev);
}
return 0;
--
2.17.1
The patch
regulator: ab8500: Remove *regulator from struct ab8500_regulator_info
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 7c6b8e3b9fe85af29b66478d585a0cffd6caa1df Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Fri, 12 Apr 2019 22:11:58 +0800
Subject: [PATCH] regulator: ab8500: Remove *regulator from struct
ab8500_regulator_info
Current code is using devm_regulator_register() so we don't need to save
*regulator for clean up, use a local variable instead.
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/ab8500.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 6b9a3463f1fd..3fcb4cbaab02 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -44,7 +44,6 @@ struct ab8500_shared_mode {
* struct ab8500_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
- * @regulator_dev: regulator device
* @shared_mode: used when mode is shared between two regulators
* @load_lp_uA: maximum load in idle (low power) mode
* @update_bank: bank to control on/off
@@ -65,7 +64,6 @@ struct ab8500_shared_mode {
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
- struct regulator_dev *regulator;
struct ab8500_shared_mode *shared_mode;
int load_lp_uA;
u8 update_bank;
@@ -1600,6 +1598,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
+ struct regulator_dev *rdev;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
@@ -1621,12 +1620,11 @@ static int ab8500_regulator_register(struct platform_device *pdev,
}
/* register regulator with framework */
- info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
- &config);
- if (IS_ERR(info->regulator)) {
+ rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
- return PTR_ERR(info->regulator);
+ return PTR_ERR(rdev);
}
return 0;
--
2.20.1
The patch
regulator: ab8500: Constify regulator_ops
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 6d66d9952ec06f12197174018be76538150aea05 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Fri, 12 Apr 2019 22:11:57 +0800
Subject: [PATCH] regulator: ab8500: Constify regulator_ops
These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/ab8500.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 83dba3fbfe0c..6b9a3463f1fd 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -510,7 +510,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+static const struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -522,7 +522,7 @@ static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_volt_ops = {
+static const struct regulator_ops ab8500_regulator_volt_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -531,7 +531,7 @@ static struct regulator_ops ab8500_regulator_volt_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_mode_ops = {
+static const struct regulator_ops ab8500_regulator_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -541,14 +541,14 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_ops = {
+static const struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
+static const struct regulator_ops ab8500_regulator_anamic_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
--
2.20.1
On Fri, Apr 12, 2019 at 4:12 PM Axel Lin <[email protected]> wrote:
> These regulator_ops variables never need to be modified, make them const so
> compiler can put them to .rodata.
>
> Signed-off-by: Axel Lin <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On Fri, Apr 12, 2019 at 4:12 PM Axel Lin <[email protected]> wrote:
> Current code is using devm_regulator_register() so we don't need to save
> *regulator for clean up, use a local variable instead.
>
> Signed-off-by: Axel Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij