2019-04-15 07:19:38

by Nava kishore Manne

[permalink] [raw]
Subject: [PATCH v5 0/3]Add Bitstream configuration support for ZynqMP

Nava kishore Manne (3):
firmware: xilinx: Add fpga API's
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
fpga manager: Adding FPGA Manager support for Xilinx zynqmp

.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 +++
drivers/firmware/xilinx/zynqmp.c | 45 +++++
drivers/fpga/Kconfig | 9 +
drivers/fpga/Makefile | 1 +
drivers/fpga/zynqmp-fpga.c | 159 ++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 12 ++
6 files changed, 251 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
create mode 100644 drivers/fpga/zynqmp-fpga.c

--
2.18.0


2019-04-15 07:20:01

by Nava kishore Manne

[permalink] [raw]
Subject: [PATCH v5 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

Add documentation to describe Xilinx ZynqMP fpga driver
bindings.

Signed-off-by: Nava kishore Manne <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Alan Tull <[email protected]>
Acked-by: Moritz Fischer <[email protected]>
---
Changes for v5:
-None.

.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..3052bf619dd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,25 @@
+Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
+The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
+Programmable Logic (PL). The configuration uses the firmware interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example for full FPGA configuration:
+
+ fpga-region0 {
+ compatible = "fpga-region";
+ fpga-mgr = <&zynqmp_pcap>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
+ };
+ };
--
2.18.0

2019-04-15 07:21:06

by Nava kishore Manne

[permalink] [raw]
Subject: [PATCH v5 1/3] firmware: xilinx: Add fpga API's

This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.

Signed-off-by: Nava kishore Manne <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
---
Changes for v5:
-Modified API's doc as suggested by Moritz.

drivers/firmware/xilinx/zynqmp.c | 45 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++
2 files changed, 57 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 98f936125643..f355ad42917c 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -537,6 +537,49 @@ static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
return ret;
}

+/*
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags: Bitstream type
+ * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
+ * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the pmufw to get the PCAP
+ * status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
@@ -640,6 +683,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.request_node = zynqmp_pm_request_node,
.release_node = zynqmp_pm_release_node,
.set_requirement = zynqmp_pm_set_requirement,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};

/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 642dab10f65d..1b1de5539036 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -48,6 +48,14 @@
#define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U
#define ZYNQMP_PM_CAPABILITY_POWER 0x8U

+/*
+ * Firmware FPGA Manager flags
+ * XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
+ * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ */
+#define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U
+#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+
enum pm_api_id {
PM_GET_API_VERSION = 1,
PM_REQUEST_NODE = 13,
@@ -56,6 +64,8 @@ enum pm_api_id {
PM_RESET_ASSERT = 17,
PM_RESET_GET_STATUS,
PM_PM_INIT_FINALIZE = 21,
+ PM_FPGA_LOAD,
+ PM_FPGA_GET_STATUS,
PM_GET_CHIPID = 24,
PM_IOCTL = 34,
PM_QUERY_DATA,
@@ -258,6 +268,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
int (*get_chipid)(u32 *idcode, u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
int (*clock_disable)(u32 clock_id);
--
2.18.0

2019-04-15 07:21:09

by Nava kishore Manne

[permalink] [raw]
Subject: [PATCH v5 3/3] fpga manager: Adding FPGA Manager support for Xilinx zynqmp

This patch adds FPGA Manager support for the Xilinx
ZynqMP chip.

Signed-off-by: Nava kishore Manne <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Acked-by: Alan Tull <[email protected]>
---
Changes for v5:
-Removed hardcoded macro values and used BIT(x)
as suggested by Moritz.

drivers/fpga/Kconfig | 9 +++
drivers/fpga/Makefile | 1 +
drivers/fpga/zynqmp-fpga.c | 159 +++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/fpga/zynqmp-fpga.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index c20445b867ae..d892f3efcd76 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -204,4 +204,13 @@ config FPGA_DFL_PCI

To compile this as a module, choose M here.

+config FPGA_MGR_ZYNQMP_FPGA
+ tristate "Xilinx ZynqMP FPGA"
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ help
+ FPGA manager driver support for Xilinx ZynqMP FPGAs.
+ This driver uses the processor configuration port(PCAP)
+ to configure the programmable logic(PL) through PS
+ on ZynqMP SoC.
+
endif # FPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index c0dd4c82fbdb..312b9371742f 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o
obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o
obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o
obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o

diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
new file mode 100644
index 000000000000..f7cbaadf49ab
--- /dev/null
+++ b/drivers/fpga/zynqmp-fpga.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Xilinx, Inc.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Constant Definitions */
+#define IXR_FPGA_DONE_MASK BIT(3)
+
+/**
+ * struct zynqmp_fpga_priv - Private data structure
+ * @dev: Device data structure
+ * @flags: flags which is used to identify the bitfile type
+ */
+struct zynqmp_fpga_priv {
+ struct device *dev;
+ u32 flags;
+};
+
+static int zynqmp_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t size)
+{
+ struct zynqmp_fpga_priv *priv;
+
+ priv = mgr->priv;
+ priv->flags = info->flags;
+
+ return 0;
+}
+
+static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
+ const char *buf, size_t size)
+{
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+ struct zynqmp_fpga_priv *priv;
+ dma_addr_t dma_addr;
+ u32 eemi_flags = 0;
+ char *kbuf;
+ int ret;
+
+ if (!eemi_ops || !eemi_ops->fpga_load)
+ return -ENXIO;
+
+ priv = mgr->priv;
+
+ kbuf = dma_alloc_coherent(priv->dev, size, &dma_addr, GFP_KERNEL);
+ if (!kbuf)
+ return -ENOMEM;
+
+ memcpy(kbuf, buf, size);
+
+ wmb(); /* ensure all writes are done before initiate FW call */
+
+ if (priv->flags & FPGA_MGR_PARTIAL_RECONFIG)
+ eemi_flags |= XILINX_ZYNQMP_PM_FPGA_PARTIAL;
+
+ ret = eemi_ops->fpga_load(dma_addr, size, eemi_flags);
+
+ dma_free_coherent(priv->dev, size, kbuf, dma_addr);
+
+ return ret;
+}
+
+static int zynqmp_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ return 0;
+}
+
+static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
+{
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+ u32 status;
+
+ if (!eemi_ops || !eemi_ops->fpga_get_status)
+ return FPGA_MGR_STATE_UNKNOWN;
+
+ eemi_ops->fpga_get_status(&status);
+ if (status & IXR_FPGA_DONE_MASK)
+ return FPGA_MGR_STATE_OPERATING;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops zynqmp_fpga_ops = {
+ .state = zynqmp_fpga_ops_state,
+ .write_init = zynqmp_fpga_ops_write_init,
+ .write = zynqmp_fpga_ops_write,
+ .write_complete = zynqmp_fpga_ops_write_complete,
+};
+
+static int zynqmp_fpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct zynqmp_fpga_priv *priv;
+ struct fpga_manager *mgr;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ mgr = devm_fpga_mgr_create(dev, "Xilinx ZynqMP FPGA Manager",
+ &zynqmp_fpga_ops, priv);
+ if (!mgr)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mgr);
+
+ ret = fpga_mgr_register(mgr);
+ if (ret) {
+ dev_err(dev, "unable to register FPGA manager");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int zynqmp_fpga_remove(struct platform_device *pdev)
+{
+ struct fpga_manager *mgr = platform_get_drvdata(pdev);
+
+ fpga_mgr_unregister(mgr);
+
+ return 0;
+}
+
+static const struct of_device_id zynqmp_fpga_of_match[] = {
+ { .compatible = "xlnx,zynqmp-pcap-fpga", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, zynqmp_fpga_of_match);
+
+static struct platform_driver zynqmp_fpga_driver = {
+ .probe = zynqmp_fpga_probe,
+ .remove = zynqmp_fpga_remove,
+ .driver = {
+ .name = "zynqmp_fpga_manager",
+ .of_match_table = of_match_ptr(zynqmp_fpga_of_match),
+ },
+};
+
+module_platform_driver(zynqmp_fpga_driver);
+
+MODULE_AUTHOR("Nava kishore Manne <[email protected]>");
+MODULE_DESCRIPTION("Xilinx ZynqMp FPGA Manager");
+MODULE_LICENSE("GPL");
--
2.18.0

2019-04-15 08:35:27

by Michal Simek

[permalink] [raw]
Subject: Re: [PATCH v5 1/3] firmware: xilinx: Add fpga API's

On 15. 04. 19 9:17, Nava kishore Manne wrote:
> This Patch Adds fpga API's to support the Bitstream loading
> by using firmware interface.
>
> Signed-off-by: Nava kishore Manne <[email protected]>
> Reviewed-by: Moritz Fischer <[email protected]>
> ---
> Changes for v5:
> -Modified API's doc as suggested by Moritz.
>
> drivers/firmware/xilinx/zynqmp.c | 45 ++++++++++++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++
> 2 files changed, 57 insertions(+)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 98f936125643..f355ad42917c 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -537,6 +537,49 @@ static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
> return ret;
> }
>
> +/*

This should be /**

I have fixed it myself and applied the whole series to zynqmp/soc branch
and this will go via arm-soc tree.

Thanks,
Michal