Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
on
(CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)
were left to being built as modules.
Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed"
that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.
Thing is, if the rootfs is stored in the on-board flash (which
is the "canonical" way of doing things), we either need these drivers
to be built-in, or we need to fiddle with an initramfs to access that
flash and eventually load the modules installed over there.
The former is the easiest, do that.
Signed-off-by: Valentin Schneider <[email protected]>
---
arch/arm64/configs/defconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 2d9c39033c1a..32fb03503b0b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -222,10 +222,10 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
-CONFIG_SCSI_UFSHCD=m
-CONFIG_SCSI_UFSHCD_PLATFORM=m
+CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_QCOM=m
-CONFIG_SCSI_UFS_HISI=m
+CONFIG_SCSI_UFS_HISI=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
--
2.20.1
On Tue, Apr 16, 2019 at 06:02:21PM +0100, Valentin Schneider wrote:
> Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
> set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
> on
>
> (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)
>
> were left to being built as modules.
>
> Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed"
> that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.
>
> Thing is, if the rootfs is stored in the on-board flash (which
> is the "canonical" way of doing things), we either need these drivers
> to be built-in, or we need to fiddle with an initramfs to access that
> flash and eventually load the modules installed over there.
>
> The former is the easiest, do that.
>
> Signed-off-by: Valentin Schneider <[email protected]>
Looks good to me:
Reviewed-by: Leo Yan <[email protected]>
> ---
> arch/arm64/configs/defconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 2d9c39033c1a..32fb03503b0b 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -222,10 +222,10 @@ CONFIG_BLK_DEV_SD=y
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_SCSI_HISI_SAS=y
> CONFIG_SCSI_HISI_SAS_PCI=y
> -CONFIG_SCSI_UFSHCD=m
> -CONFIG_SCSI_UFSHCD_PLATFORM=m
> +CONFIG_SCSI_UFSHCD=y
> +CONFIG_SCSI_UFSHCD_PLATFORM=y
> CONFIG_SCSI_UFS_QCOM=m
> -CONFIG_SCSI_UFS_HISI=m
> +CONFIG_SCSI_UFS_HISI=y
> CONFIG_ATA=y
> CONFIG_SATA_AHCI=y
> CONFIG_SATA_AHCI_PLATFORM=y
> --
> 2.20.1
>
On Tue, Apr 16, 2019 at 06:02:21PM +0100, Valentin Schneider wrote:
> Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
> set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
> on
>
> (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)
>
> were left to being built as modules.
>
> Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed"
> that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.
>
> Thing is, if the rootfs is stored in the on-board flash (which
> is the "canonical" way of doing things), we either need these drivers
> to be built-in, or we need to fiddle with an initramfs to access that
> flash and eventually load the modules installed over there.
>
> The former is the easiest, do that.
>
> Signed-off-by: Valentin Schneider <[email protected]>
Applied, thanks!
-Olof