BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
software compatible.
Changes include:
- 2GiB -> 1GiB
- no eMMC
- no onboard microphone
- no IR
- no blue LED
- no charging (and power jack to USB)
- dropped USB2 and connect USB1 to a 4-port HUB.
Changes in v6:
- Removed patch already queued for 5.3
- Reworked which nodes are added according to the new patch order
- Squashed bt and wifi patches
Changes in v5:
- Changed commit order
- Removed regulator-always-on from gpio regulators
- Copied commit log for the bluetooth node from the m2-ultra
Changes in v4:
- Went back to v2
- Added GPIO pin-bank regulators (both m2-ultra and m2-berry)
Changes in v3:
- Removed "Sort device node dereferences" (already applied)
- Added basic pio node
- Tied GMAC regulators to the pio (both m2-ultra and m2-berry)
Changes in v2:
- Split into smaller patches
Pablo Greco (5):
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator
supplies
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet
controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 123 ++++++++++++++++++++++
1 file changed, 123 insertions(+)
--
1.8.3.1
On Thu, May 02, 2019 at 10:33:44AM -0300, Pablo Greco wrote:
> BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
> software compatible.
Queued all for 5.3, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com