This is the start of the stable review cycle for the 5.0.14 release.
There are 122 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.0.14-rc1
Jacopo Mondi <[email protected]>
media: v4l2: i2c: ov7670: Fix PLL bypass register values
Nicolas Le Bayon <[email protected]>
i2c: i2c-stm32f7: Fix SDADEL minimum formula
Peter Zijlstra <[email protected]>
x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info"
Qian Cai <[email protected]>
x86/mm: Fix a crash with kmemleak_scan()
Baoquan He <[email protected]>
x86/mm/KASLR: Fix the size of the direct mapping section
David Müller <[email protected]>
clk: x86: Add system specific quirk to mark clocks as critical
Tony Luck <[email protected]>
x86/mce: Improve error message when kernel cannot recover, p2
Aneesh Kumar K.V <[email protected]>
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
Alexander Wetzel <[email protected]>
mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN mode
Ondrej Mosnacek <[email protected]>
selinux: never allow relabeling on context mounts
Stephen Smalley <[email protected]>
selinux: avoid silent denials in permissive mode under RCU walk
Anson Huang <[email protected]>
gpio: mxc: add check to return defer probe if clock tree NOT ready
Dmitry Torokhov <[email protected]>
Input: stmfts - acknowledge that setting brightness is a blocking call
Anson Huang <[email protected]>
Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
Yuval Avnery <[email protected]>
IB/core: Destroy QP if XRC QP fails
Daniel Jurgens <[email protected]>
IB/core: Fix potential memory leak while creating MAD agents
Daniel Jurgens <[email protected]>
IB/core: Unregister notifier before freeing MAD security
Rajneesh Bhardwaj <[email protected]>
platform/x86: intel_pmc_core: Handle CFL regmap properly
Rajneesh Bhardwaj <[email protected]>
platform/x86: intel_pmc_core: Fix PCH IP name
Sean Christopherson <[email protected]>
KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer
Yu Zhang <[email protected]>
kvm: vmx: Fix typos in vmentry/vmexit control setting
Sean Christopherson <[email protected]>
KVM: nVMX: Remove a rogue "rax" clobber from nested_vmx_check_vmentry_hw()
Sean Christopherson <[email protected]>
KVM: VMX: Save RSI to an unused output in the vCPU-run asm blob
Arnaud Pouliquen <[email protected]>
ASoC: stm32: fix sai driver name initialisation
Jerome Brunet <[email protected]>
ASoC: dpcm: skip missing substream while applying symmetry
Charles Keepax <[email protected]>
ASoC: wm_adsp: Correct handling of compressed streams that restart
Chen-Yu Tsai <[email protected]>
ASoC: sunxi: sun50i-codec-analog: Rename hpvcc regulator supply to cpvdd
Jiada Wang <[email protected]>
ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5651: Revert "Fix DMIC map headsetmic mapping"
Bart Van Assche <[email protected]>
scsi: RDMA/srpt: Fix a credit leak for aborted commands
John Garry <[email protected]>
scsi: hisi_sas: Fix to only call scsi_get_prot_op() for non-NULL scsi_cmnd
Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac write calculation
Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix handling of dac high resolution option
Jeremy Fertic <[email protected]>
staging: iio: adt7316: fix the dac read calculation
Jeremy Fertic <[email protected]>
staging: iio: adt7316: allow adt751x to use internal vref for all dacs
Thinh Nguyen <[email protected]>
usb: dwc3: Reset num_trbs after skipping
Jeffrey Hugo <[email protected]>
clk: qcom: Add missing freq for usb30_master_clk on 8998
Sean Wang <[email protected]>
Bluetooth: mediatek: fix up an error path to restore bdev->tx_state
Brian Norris <[email protected]>
Bluetooth: btusb: request wake pin with NOAUTOEN
Kim Phillips <[email protected]>
perf/x86/amd: Update generic hardware cache events for Family 17h
Arnd Bergmann <[email protected]>
ARM: iop: don't use using 64-bit DMA masks
Arnd Bergmann <[email protected]>
ARM: orion: don't use using 64-bit DMA masks
Kirill Smelkov <[email protected]>
fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock
Guenter Roeck <[email protected]>
xsysace: Fix error handling in ace_setup
John Pittman <[email protected]>
null_blk: prevent crash from bad home_node value
Randy Dunlap <[email protected]>
sh: fix multiple function definition build errors
Mike Kravetz <[email protected]>
hugetlbfs: fix memory leak for resv_map
Catalin Marinas <[email protected]>
kmemleak: powerpc: skip scanning holes in the .bss section
David Rientjes <[email protected]>
KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow
Varun Prakash <[email protected]>
libcxgb: fix incorrect ppmax calculation
Yonglong Liu <[email protected]>
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
Yonglong Liu <[email protected]>
net: hns: fix ICMP6 neighbor solicitation messages discard problem
Yonglong Liu <[email protected]>
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
Yonglong Liu <[email protected]>
net: hns: Use NAPI_POLL_WEIGHT for hns driver
Liubin Shu <[email protected]>
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
Wei Li <[email protected]>
arm64: fix wrong check of on_sdei_stack in nmi context
Dongli Zhang <[email protected]>
blk-mq: do not reset plug->rq_count before the list is sorted
Peng Hao <[email protected]>
arm/mach-at91/pm : fix possible object reference leak
Michael Kelley <[email protected]>
scsi: storvsc: Fix calculation of sub-channel count
Xose Vazquez Perez <[email protected]>
scsi: core: add new RDAC LENOVO/DE_Series device
Louis Taylor <[email protected]>
vfio/pci: use correct format characters
Dmitry Torokhov <[email protected]>
HID: input: add mapping for Assistant key
Alexandre Belloni <[email protected]>
rtc: da9063: set uie_unsupported when relevant
Shenghui Wang <[email protected]>
block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
Andreas Kemnade <[email protected]>
mfd: twl-core: Disable IRQ while suspended
Al Viro <[email protected]>
debugfs: fix use-after-free on symlink traversal
Al Viro <[email protected]>
jffs2: fix use-after-free on symlink traversal
Aaro Koskinen <[email protected]>
net: stmmac: don't log oversized frames
Aaro Koskinen <[email protected]>
net: stmmac: fix dropping of multi-descriptor RX frames
Aaro Koskinen <[email protected]>
net: stmmac: don't overwrite discard_frame status
Aaro Koskinen <[email protected]>
net: stmmac: don't stop NAPI processing when dropping a packet
Aaro Koskinen <[email protected]>
net: stmmac: ratelimit RX error logs
Aaro Koskinen <[email protected]>
net: stmmac: use correct DMA buffer size in the RX descriptor
Konstantin Khorenko <[email protected]>
bonding: show full hw address in sysfs for slave entries
Omri Kahalon <[email protected]>
net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands
Roi Dayan <[email protected]>
net/mlx5: E-Switch, Protect from invalid memory access in offload fdb table
Jesper Dangaard Brouer <[email protected]>
xdp: fix cpumap redirect SKB creation bug
Xi Wang <[email protected]>
net: hns3: fix compile error
Jeffrey Hugo <[email protected]>
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
Alan Kao <[email protected]>
riscv: fix accessing 8-byte variable from RV32
Stefan Assmann <[email protected]>
i40e: fix WoL support check
Ivan Vecera <[email protected]>
ixgbe: fix mdio bus registration
Arvind Sankar <[email protected]>
igb: Fix WARN_ONCE on runtime suspend
Jacob Keller <[email protected]>
i40e: fix i40e_ptp_adjtime when given a negative delta
Tony Lindgren <[email protected]>
ARM: dts: Fix dcan clkctrl clock for am3
Axel Lin <[email protected]>
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
Douglas Anderson <[email protected]>
ARM: dts: rockchip: Fix gpu opp node names for rk3288
Anders Roxell <[email protected]>
batman-adv: fix warning in function batadv_v_elp_get_throughput
Sven Eckelmann <[email protected]>
batman-adv: Reduce tt_global hash refcnt only for removed entry
Sven Eckelmann <[email protected]>
batman-adv: Reduce tt_local hash refcnt only for removed entry
Sven Eckelmann <[email protected]>
batman-adv: Reduce claim hash refcnt only for removed entry
Julia Lawall <[email protected]>
ARM: OMAP2+: add missing of_node_put after of_device_is_available
Geert Uytterhoeven <[email protected]>
rtc: sh: Fix invalid alarm warning for non-enabled alarm
Stephen Boyd <[email protected]>
rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
He, Bo <[email protected]>
HID: debug: fix race condition with between rdesc_show() and device removal
Kangjie Lu <[email protected]>
HID: logitech: check the return value of create_singlethread_workqueue
Kai-Heng Feng <[email protected]>
HID: Increase maximum report size allowed by hid_field_extract()
Leonidas P. Papadakos <[email protected]>
arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay
Sean Christopherson <[email protected]>
KVM: lapic: Convert guest TSC to host time domain if necessary
Sean Christopherson <[email protected]>
KVM: lapic: Allow user to disable adaptive tuning of timer advancement
Sean Christopherson <[email protected]>
KVM: lapic: Track lapic timer advance per vCPU
Liran Alon <[email protected]>
KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short
Sean Christopherson <[email protected]>
KVM: lapic: Disable timer advancement if adaptive tuning goes haywire
Alan Stern <[email protected]>
USB: core: Fix bug caused by duplicate interface PM usage counter
Alan Stern <[email protected]>
USB: core: Fix unterminated string returned by usb_string()
Malte Leip <[email protected]>
usb: usbip: fix isoc packet num validation in get_pipe
Alan Stern <[email protected]>
USB: dummy-hcd: Fix failure to give back unlinked URBs
Alan Stern <[email protected]>
USB: w1 ds2490: Fix bug caused by improper use of altsetting array
Alan Stern <[email protected]>
USB: yurex: Fix protection fault after device removal
Takashi Iwai <[email protected]>
ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR
Kailang Yang <[email protected]>
ALSA: hda/realtek - Fixed Dell AIO speaker noise
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add new Dell platform for headset mode
Jarkko Nikula <[email protected]>
i2c: Prevent runtime suspend of adapter when Host Notify is required
Anson Huang <[email protected]>
i2c: imx: correct the method of getting private data in notifier_call
Ard Biesheuvel <[email protected]>
i2c: synquacer: fix enumeration of slave devices
Johannes Berg <[email protected]>
mac80211: don't attempt to rename ERR_PTR() debugfs dirs
Miquel Raynal <[email protected]>
mtd: rawnand: marvell: Clean the controller state before each operation
Douglas Anderson <[email protected]>
mwifiex: Make resume actually do something useful again on SDIO cards
Emmanuel Grumbach <[email protected]>
iwlwifi: fix driver operation for 5350
Eugeniy Paltsev <[email protected]>
ARC: memset: fix build with L1_CACHE_SHIFT != 6
Tycho Andersen <[email protected]>
seccomp: Make NEW_LISTENER and TSYNC flags exclusive
Kees Cook <[email protected]>
selftests/seccomp: Prepare for exclusive seccomp flags
-------------
Diffstat:
Documentation/driver-api/usb/power-management.rst | 14 +-
Makefile | 4 +-
arch/arc/lib/memset-archs.S | 4 +-
arch/arm/boot/dts/am33xx-l4.dtsi | 4 +-
arch/arm/boot/dts/rk3288.dtsi | 12 +-
arch/arm/mach-at91/pm.c | 6 +-
arch/arm/mach-iop13xx/setup.c | 8 +-
arch/arm/mach-iop13xx/tpmi.c | 10 +-
arch/arm/mach-omap2/display.c | 4 +-
arch/arm/plat-iop/adma.c | 6 +-
arch/arm/plat-orion/common.c | 4 +-
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 +-
arch/arm64/kernel/sdei.c | 6 +
arch/powerpc/kernel/kvm.c | 7 +
arch/powerpc/mm/slice.c | 10 +-
arch/riscv/include/asm/uaccess.h | 2 +-
arch/sh/boards/of-generic.c | 4 +-
arch/x86/events/amd/core.c | 111 ++++++-
arch/x86/kernel/cpu/mce/severity.c | 5 +
arch/x86/kvm/lapic.c | 73 +++--
arch/x86/kvm/lapic.h | 4 +-
arch/x86/kvm/svm.c | 12 +-
arch/x86/kvm/vmx/nested.c | 2 +-
arch/x86/kvm/vmx/vmx.c | 6 +-
arch/x86/kvm/vmx/vmx.h | 8 +-
arch/x86/kvm/x86.c | 15 +-
arch/x86/kvm/x86.h | 2 -
arch/x86/mm/init.c | 6 +
arch/x86/mm/kaslr.c | 2 +-
arch/x86/mm/tlb.c | 2 +-
block/blk-mq.c | 5 +-
drivers/block/null_blk_main.c | 5 +
drivers/block/xsysace.c | 2 +
drivers/bluetooth/btmtkuart.c | 2 +
drivers/bluetooth/btusb.c | 2 +-
drivers/clk/qcom/gcc-msm8998.c | 1 +
drivers/clk/x86/clk-pmc-atom.c | 14 +-
drivers/gpio/gpio-mxc.c | 5 +-
drivers/hid/hid-core.c | 6 +-
drivers/hid/hid-debug.c | 5 +
drivers/hid/hid-input.c | 1 +
drivers/hid/hid-logitech-hidpp.c | 8 +-
drivers/hid/hid-quirks.c | 5 +-
drivers/i2c/busses/i2c-imx.c | 4 +-
drivers/i2c/busses/i2c-stm32f7.c | 2 +-
drivers/i2c/busses/i2c-synquacer.c | 2 +
drivers/i2c/i2c-core-base.c | 4 +
drivers/infiniband/core/security.c | 11 +-
drivers/infiniband/core/verbs.c | 41 ++-
drivers/infiniband/ulp/srpt/ib_srpt.c | 11 +
drivers/input/keyboard/snvs_pwrkey.c | 6 +-
drivers/input/touchscreen/stmfts.c | 30 +-
drivers/media/i2c/ov7670.c | 16 +-
drivers/mfd/twl-core.c | 23 ++
drivers/mtd/nand/raw/marvell_nand.c | 12 +-
drivers/net/bonding/bond_sysfs_slave.c | 4 +-
drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c | 9 +-
drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 33 +-
.../net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 12 +-
.../net/ethernet/hisilicon/hns3/hns3pf/Makefile | 2 +-
.../net/ethernet/hisilicon/hns3/hns3vf/Makefile | 2 +-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +-
drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +-
drivers/net/ethernet/intel/igb/e1000_defines.h | 2 +
drivers/net/ethernet/intel/igb/igb_main.c | 57 +---
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 16 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 +-
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 1 +
drivers/net/ethernet/stmicro/stmmac/descs_com.h | 22 +-
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 22 +-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 12 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 34 +-
drivers/net/wireless/intel/iwlwifi/cfg/5000.c | 3 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +-
drivers/platform/x86/intel_pmc_core.c | 4 +-
drivers/platform/x86/pmc_atom.c | 21 ++
drivers/reset/reset-meson-audio-arb.c | 1 +
drivers/rtc/rtc-cros-ec.c | 4 +-
drivers/rtc/rtc-da9063.c | 7 +
drivers/rtc/rtc-sh.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +-
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_dh.c | 1 +
drivers/scsi/storvsc_drv.c | 13 +-
drivers/staging/iio/addac/adt7316.c | 34 +-
drivers/usb/core/driver.c | 13 -
drivers/usb/core/message.c | 4 +-
drivers/usb/dwc3/gadget.c | 2 +
drivers/usb/gadget/udc/dummy_hcd.c | 19 +-
drivers/usb/misc/yurex.c | 1 +
drivers/usb/storage/realtek_cr.c | 13 +-
drivers/usb/usbip/stub_rx.c | 12 +-
drivers/usb/usbip/usbip_common.h | 7 +
drivers/vfio/pci/vfio_pci.c | 4 +-
drivers/w1/masters/ds2490.c | 6 +-
drivers/xen/xenbus/xenbus_dev_frontend.c | 4 +-
fs/debugfs/inode.c | 13 +-
fs/hugetlbfs/inode.c | 20 +-
fs/jffs2/readinode.c | 5 -
fs/jffs2/super.c | 5 +-
fs/open.c | 18 +
fs/read_write.c | 5 +-
include/linux/fs.h | 4 +
include/linux/platform_data/x86/clk-pmc-atom.h | 3 +
include/linux/usb.h | 2 -
kernel/bpf/cpumap.c | 13 +-
kernel/seccomp.c | 17 +-
mm/kmemleak.c | 16 +-
net/batman-adv/bat_v_elp.c | 6 +-
net/batman-adv/bridge_loop_avoidance.c | 16 +-
net/batman-adv/translation-table.c | 32 +-
net/mac80211/debugfs_netdev.c | 2 +-
net/mac80211/key.c | 9 +-
scripts/coccinelle/api/stream_open.cocci | 363 +++++++++++++++++++++
security/selinux/avc.c | 23 +-
security/selinux/hooks.c | 44 ++-
security/selinux/include/avc.h | 1 +
sound/pci/hda/patch_realtek.c | 13 +
sound/soc/codecs/wm_adsp.c | 3 +-
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
sound/soc/sh/rcar/gen.c | 24 ++
sound/soc/sh/rcar/rsnd.h | 27 ++
sound/soc/sh/rcar/ssiu.c | 24 +-
sound/soc/soc-pcm.c | 7 +-
sound/soc/stm/stm32_sai_sub.c | 2 +-
sound/soc/sunxi/sun50i-codec-analog.c | 4 +-
tools/testing/selftests/seccomp/seccomp_bpf.c | 34 +-
132 files changed, 1343 insertions(+), 429 deletions(-)
[ Upstream commit 30645307e5d2c8a4caf978558c66121ac91ad17e ]
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/mach-omap2/display.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1444b4b4bd9f..439e143cad7b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -250,8 +250,10 @@ static int __init omapdss_init_of(void)
if (!node)
return 0;
- if (!of_device_is_available(node))
+ if (!of_device_is_available(node)) {
+ of_node_put(node);
return 0;
+ }
pdev = of_find_device_by_node(node);
--
2.20.1
[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]
The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.
The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.
Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:
refcount_t: underflow; use-after-free.
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 5fdde2947802..cf2bcea7df82 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
const u8 *mac, const unsigned short vid)
{
struct batadv_bla_claim search_claim, *claim;
+ struct batadv_bla_claim *claim_removed_entry;
+ struct hlist_node *claim_removed_node;
ether_addr_copy(search_claim.addr, mac);
search_claim.vid = vid;
@@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
batadv_dbg(BATADV_DBG_BLA, bat_priv, "%s(): %pM, vid %d\n", __func__,
mac, batadv_print_vid(vid));
- batadv_hash_remove(bat_priv->bla.claim_hash, batadv_compare_claim,
- batadv_choose_claim, claim);
- batadv_claim_put(claim); /* reference from the hash is gone */
+ claim_removed_node = batadv_hash_remove(bat_priv->bla.claim_hash,
+ batadv_compare_claim,
+ batadv_choose_claim, claim);
+ if (!claim_removed_node)
+ goto free_claim;
+ /* reference from the hash is gone */
+ claim_removed_entry = hlist_entry(claim_removed_node,
+ struct batadv_bla_claim, hash_entry);
+ batadv_claim_put(claim_removed_entry);
+
+free_claim:
/* don't need the reference from hash_find() anymore */
batadv_claim_put(claim);
}
--
2.20.1
From: Kailang Yang <[email protected]>
commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.
Add two Dell platform for headset mode.
[ Note: this is a further correction / addition of the previous
pin-based quirks for Dell machines; another entry for ALC236 with
the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]
Fixes: b26e36b7ef36 ("ALSA: hda/realtek - add two more pin configuration sets to quirk table")
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7266,6 +7266,10 @@ static const struct snd_hda_pin_quirk al
{0x21, 0x02211020}),
SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
{0x21, 0x02211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0236, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0x40000000},
+ {0x14, 0x90170110},
+ {0x21, 0x02211020}),
SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE,
{0x14, 0x90170110},
{0x21, 0x02211020}),
@@ -7540,6 +7544,9 @@ static const struct snd_hda_pin_quirk al
{0x17, 0x90170110},
{0x21, 0x04211020}),
SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x14, 0x90170110},
+ {0x21, 0x04211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC295_STANDARD_PINS,
{0x17, 0x21014020},
{0x18, 0x21a19030}),
[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]
The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.
The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.
Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:
refcount_t: underflow; use-after-free.
Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: Martin Weinelt <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Acked-by: Antonio Quartulli <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/batman-adv/translation-table.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 2ee87d3ca6d0..6ec0e67be560 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -616,14 +616,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv,
struct batadv_tt_global_entry *tt_global,
const char *message)
{
+ struct batadv_tt_global_entry *tt_removed_entry;
+ struct hlist_node *tt_removed_node;
+
batadv_dbg(BATADV_DBG_TT, bat_priv,
"Deleting global tt entry %pM (vid: %d): %s\n",
tt_global->common.addr,
batadv_print_vid(tt_global->common.vid), message);
- batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt,
- batadv_choose_tt, &tt_global->common);
- batadv_tt_global_entry_put(tt_global);
+ tt_removed_node = batadv_hash_remove(bat_priv->tt.global_hash,
+ batadv_compare_tt,
+ batadv_choose_tt,
+ &tt_global->common);
+ if (!tt_removed_node)
+ return;
+
+ /* drop reference of remove hash entry */
+ tt_removed_entry = hlist_entry(tt_removed_node,
+ struct batadv_tt_global_entry,
+ common.hash_entry);
+ batadv_tt_global_entry_put(tt_removed_entry);
}
/**
--
2.20.1
[ Upstream commit d040e4e8deeaa8257d6aa260e29ad69832b5d630 ]
The device tree compiler yells like this:
Warning (unit_address_vs_reg):
/gpu-opp-table/opp@100000000:
node has a unit name, but no reg property
Let's match the cpu opp node names and use a dash.
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/boot/dts/rk3288.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 09868dcee34b..df0c5456c94f 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1282,27 +1282,27 @@
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <950000>;
};
- opp@200000000 {
+ opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <950000>;
};
- opp@300000000 {
+ opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1000000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1100000>;
};
- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1200000>;
};
- opp@600000000 {
+ opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1250000>;
};
--
2.20.1
[ Upstream commit 13e8a05b922457761ddef39cfff6231bd4ed9eef ]
Set .owner to prevent module unloading while being used.
Signed-off-by: Axel Lin <[email protected]>
Fixes: d903779b58be ("reset: meson: add meson audio arb driver")
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/reset/reset-meson-audio-arb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
index 91751617b37a..c53a2185a039 100644
--- a/drivers/reset/reset-meson-audio-arb.c
+++ b/drivers/reset/reset-meson-audio-arb.c
@@ -130,6 +130,7 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
arb->rstc.ops = &meson_audio_arb_rstc_ops;
arb->rstc.of_node = dev->of_node;
+ arb->rstc.owner = THIS_MODULE;
/*
* Enable general :
--
2.20.1
[ Upstream commit 7ec52b9df7d7472240fa96223185894b1897aeb0 ]
The ixgbe ignores errors returned from mdiobus_register() and leaves
adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED.
This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call.
Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus")
Signed-off-by: Ivan Vecera <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index cc4907f9ff02..2fb97967961c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -905,13 +905,12 @@ s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw)
struct pci_dev *pdev = adapter->pdev;
struct device *dev = &adapter->netdev->dev;
struct mii_bus *bus;
+ int err = -ENODEV;
- adapter->mii_bus = devm_mdiobus_alloc(dev);
- if (!adapter->mii_bus)
+ bus = devm_mdiobus_alloc(dev);
+ if (!bus)
return -ENOMEM;
- bus = adapter->mii_bus;
-
switch (hw->device_id) {
/* C3000 SoCs */
case IXGBE_DEV_ID_X550EM_A_KR:
@@ -949,12 +948,15 @@ s32 ixgbe_mii_bus_init(struct ixgbe_hw *hw)
*/
hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22;
- return mdiobus_register(bus);
+ err = mdiobus_register(bus);
+ if (!err) {
+ adapter->mii_bus = bus;
+ return 0;
+ }
ixgbe_no_mii_bus:
devm_mdiobus_free(dev, bus);
- adapter->mii_bus = NULL;
- return -ENODEV;
+ return err;
}
/**
--
2.20.1
From: Liran Alon <[email protected]>
commit c09d65d9eab69985c75f98ed64541229f6fa9aa6 upstream.
If guest sets MSR_IA32_TSCDEADLINE to value such that in host
time-domain it's shorter than lapic_timer_advance_ns, we can
reach a case that we call hrtimer_start() with expiration time set at
the past.
Because lapic_timer.timer is init with HRTIMER_MODE_ABS_PINNED, it
is not allowed to run in softirq and therefore will never expire.
To avoid such a scenario, verify that deadline expiration time is set on
host time-domain further than (now + lapic_timer_advance_ns).
A future patch can also consider adding a min_timer_deadline_ns module parameter,
similar to min_timer_period_us to avoid races that amount of ns it takes
to run logic could still call hrtimer_start() with expiration timer set
at the past.
Reviewed-by: Joao Martins <[email protected]>
Signed-off-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1543,9 +1543,12 @@ static void start_sw_tscdeadline(struct
now = ktime_get();
guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
- if (likely(tscdeadline > guest_tsc)) {
- ns = (tscdeadline - guest_tsc) * 1000000ULL;
- do_div(ns, this_tsc_khz);
+
+ ns = (tscdeadline - guest_tsc) * 1000000ULL;
+ do_div(ns, this_tsc_khz);
+
+ if (likely(tscdeadline > guest_tsc) &&
+ likely(ns > lapic_timer_advance_ns)) {
expire = ktime_add_ns(now, ns);
expire = ktime_sub_ns(expire, lapic_timer_advance_ns);
hrtimer_start(&apic->lapic_timer.timer,
From: Sean Christopherson <[email protected]>
commit 39497d7660d9866a47a2dc9055672358da57ad3d upstream.
Automatically adjusting the globally-shared timer advancement could
corrupt the timer, e.g. if multiple vCPUs are concurrently adjusting
the advancement value. That could be partially fixed by using a local
variable for the arithmetic, but it would still be susceptible to a
race when setting timer_advance_adjust_done.
And because virtual_tsc_khz and tsc_scaling_ratio are per-vCPU, the
correct calibration for a given vCPU may not apply to all vCPUs.
Furthermore, lapic_timer_advance_ns is marked __read_mostly, which is
effectively violated when finding a stable advancement takes an extended
amount of timer.
Opportunistically change the definition of lapic_timer_advance_ns to
a u32 so that it matches the style of struct kvm_timer. Explicitly
pass the param to kvm_create_lapic() so that it doesn't have to be
exposed to lapic.c, thus reducing the probability of unintentionally
using the global value instead of the per-vCPU value.
Cc: Liran Alon <[email protected]>
Cc: Wanpeng Li <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Cc: [email protected]
Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically")
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 36 +++++++++++++++++++-----------------
arch/x86/kvm/lapic.h | 4 +++-
arch/x86/kvm/vmx/vmx.c | 4 +++-
arch/x86/kvm/x86.c | 7 +++----
arch/x86/kvm/x86.h | 2 --
5 files changed, 28 insertions(+), 25 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -70,7 +70,6 @@
#define APIC_BROADCAST 0xFF
#define X2APIC_BROADCAST 0xFFFFFFFFul
-static bool lapic_timer_advance_adjust_done = false;
#define LAPIC_TIMER_ADVANCE_ADJUST_DONE 100
/* step-by-step approximation to mitigate fluctuation */
#define LAPIC_TIMER_ADVANCE_ADJUST_STEP 8
@@ -1482,6 +1481,7 @@ static bool lapic_timer_int_injected(str
void wait_lapic_expire(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 timer_advance_ns = apic->lapic_timer.timer_advance_ns;
u64 guest_tsc, tsc_deadline, ns;
if (!lapic_in_kernel(vcpu))
@@ -1501,34 +1501,36 @@ void wait_lapic_expire(struct kvm_vcpu *
/* __delay is delay_tsc whenever the hardware has TSC, thus always. */
if (guest_tsc < tsc_deadline)
__delay(min(tsc_deadline - guest_tsc,
- nsec_to_cycles(vcpu, lapic_timer_advance_ns)));
+ nsec_to_cycles(vcpu, timer_advance_ns)));
- if (!lapic_timer_advance_adjust_done) {
+ if (!apic->lapic_timer.timer_advance_adjust_done) {
/* too early */
if (guest_tsc < tsc_deadline) {
ns = (tsc_deadline - guest_tsc) * 1000000ULL;
do_div(ns, vcpu->arch.virtual_tsc_khz);
- lapic_timer_advance_ns -= min((unsigned int)ns,
- lapic_timer_advance_ns / LAPIC_TIMER_ADVANCE_ADJUST_STEP);
+ timer_advance_ns -= min((u32)ns,
+ timer_advance_ns / LAPIC_TIMER_ADVANCE_ADJUST_STEP);
} else {
/* too late */
ns = (guest_tsc - tsc_deadline) * 1000000ULL;
do_div(ns, vcpu->arch.virtual_tsc_khz);
- lapic_timer_advance_ns += min((unsigned int)ns,
- lapic_timer_advance_ns / LAPIC_TIMER_ADVANCE_ADJUST_STEP);
+ timer_advance_ns += min((u32)ns,
+ timer_advance_ns / LAPIC_TIMER_ADVANCE_ADJUST_STEP);
}
if (abs(guest_tsc - tsc_deadline) < LAPIC_TIMER_ADVANCE_ADJUST_DONE)
- lapic_timer_advance_adjust_done = true;
- if (unlikely(lapic_timer_advance_ns > 5000)) {
- lapic_timer_advance_ns = 0;
- lapic_timer_advance_adjust_done = true;
+ apic->lapic_timer.timer_advance_adjust_done = true;
+ if (unlikely(timer_advance_ns > 5000)) {
+ timer_advance_ns = 0;
+ apic->lapic_timer.timer_advance_adjust_done = true;
}
+ apic->lapic_timer.timer_advance_ns = timer_advance_ns;
}
}
static void start_sw_tscdeadline(struct kvm_lapic *apic)
{
- u64 guest_tsc, tscdeadline = apic->lapic_timer.tscdeadline;
+ struct kvm_timer *ktimer = &apic->lapic_timer;
+ u64 guest_tsc, tscdeadline = ktimer->tscdeadline;
u64 ns = 0;
ktime_t expire;
struct kvm_vcpu *vcpu = apic->vcpu;
@@ -1548,11 +1550,10 @@ static void start_sw_tscdeadline(struct
do_div(ns, this_tsc_khz);
if (likely(tscdeadline > guest_tsc) &&
- likely(ns > lapic_timer_advance_ns)) {
+ likely(ns > apic->lapic_timer.timer_advance_ns)) {
expire = ktime_add_ns(now, ns);
- expire = ktime_sub_ns(expire, lapic_timer_advance_ns);
- hrtimer_start(&apic->lapic_timer.timer,
- expire, HRTIMER_MODE_ABS_PINNED);
+ expire = ktime_sub_ns(expire, ktimer->timer_advance_ns);
+ hrtimer_start(&ktimer->timer, expire, HRTIMER_MODE_ABS_PINNED);
} else
apic_timer_expired(apic);
@@ -2259,7 +2260,7 @@ static enum hrtimer_restart apic_timer_f
return HRTIMER_NORESTART;
}
-int kvm_create_lapic(struct kvm_vcpu *vcpu)
+int kvm_create_lapic(struct kvm_vcpu *vcpu, u32 timer_advance_ns)
{
struct kvm_lapic *apic;
@@ -2283,6 +2284,7 @@ int kvm_create_lapic(struct kvm_vcpu *vc
hrtimer_init(&apic->lapic_timer.timer, CLOCK_MONOTONIC,
HRTIMER_MODE_ABS_PINNED);
apic->lapic_timer.timer.function = apic_timer_fn;
+ apic->lapic_timer.timer_advance_ns = timer_advance_ns;
/*
* APIC is created enabled. This will prevent kvm_lapic_set_base from
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -31,8 +31,10 @@ struct kvm_timer {
u32 timer_mode_mask;
u64 tscdeadline;
u64 expired_tscdeadline;
+ u32 timer_advance_ns;
atomic_t pending; /* accumulated triggered timers */
bool hv_timer_in_use;
+ bool timer_advance_adjust_done;
};
struct kvm_lapic {
@@ -62,7 +64,7 @@ struct kvm_lapic {
struct dest_map;
-int kvm_create_lapic(struct kvm_vcpu *vcpu);
+int kvm_create_lapic(struct kvm_vcpu *vcpu, u32 timer_advance_ns);
void kvm_free_lapic(struct kvm_vcpu *vcpu);
int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu);
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7133,6 +7133,7 @@ static int vmx_set_hv_timer(struct kvm_v
{
struct vcpu_vmx *vmx;
u64 tscl, guest_tscl, delta_tsc, lapic_timer_advance_cycles;
+ struct kvm_timer *ktimer = &vcpu->arch.apic->lapic_timer;
if (kvm_mwait_in_guest(vcpu->kvm))
return -EOPNOTSUPP;
@@ -7141,7 +7142,8 @@ static int vmx_set_hv_timer(struct kvm_v
tscl = rdtsc();
guest_tscl = kvm_read_l1_tsc(vcpu, tscl);
delta_tsc = max(guest_deadline_tsc, guest_tscl) - guest_tscl;
- lapic_timer_advance_cycles = nsec_to_cycles(vcpu, lapic_timer_advance_ns);
+ lapic_timer_advance_cycles = nsec_to_cycles(vcpu,
+ ktimer->timer_advance_ns);
if (delta_tsc > lapic_timer_advance_cycles)
delta_tsc -= lapic_timer_advance_cycles;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -137,9 +137,8 @@ static u32 __read_mostly tsc_tolerance_p
module_param(tsc_tolerance_ppm, uint, S_IRUGO | S_IWUSR);
/* lapic timer advance (tscdeadline mode only) in nanoseconds */
-unsigned int __read_mostly lapic_timer_advance_ns = 1000;
+static u32 __read_mostly lapic_timer_advance_ns = 1000;
module_param(lapic_timer_advance_ns, uint, S_IRUGO | S_IWUSR);
-EXPORT_SYMBOL_GPL(lapic_timer_advance_ns);
static bool __read_mostly vector_hashing = true;
module_param(vector_hashing, bool, S_IRUGO);
@@ -7882,7 +7881,7 @@ static int vcpu_enter_guest(struct kvm_v
}
trace_kvm_entry(vcpu->vcpu_id);
- if (lapic_timer_advance_ns)
+ if (vcpu->arch.apic->lapic_timer.timer_advance_ns)
wait_lapic_expire(vcpu);
guest_enter_irqoff();
@@ -9070,7 +9069,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *
goto fail_free_pio_data;
if (irqchip_in_kernel(vcpu->kvm)) {
- r = kvm_create_lapic(vcpu);
+ r = kvm_create_lapic(vcpu, lapic_timer_advance_ns);
if (r < 0)
goto fail_mmu_destroy;
} else
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -294,8 +294,6 @@ extern u64 kvm_supported_xcr0(void);
extern unsigned int min_timer_period_us;
-extern unsigned int lapic_timer_advance_ns;
-
extern bool enable_vmware_backdoor;
extern struct static_key kvm_no_apic_vcpu;
From: Sean Christopherson <[email protected]>
commit c3941d9e0ccd48920e4811f133235b3597e5310b upstream.
The introduction of adaptive tuning of lapic timer advancement did not
allow for the scenario where userspace would want to disable adaptive
tuning but still employ timer advancement, e.g. for testing purposes or
to handle a use case where adaptive tuning is unable to settle on a
suitable time. This is epecially pertinent now that KVM places a hard
threshold on the maximum advancment time.
Rework the timer semantics to accept signed values, with a value of '-1'
being interpreted as "use adaptive tuning with KVM's internal default",
and any other value being used as an explicit advancement time, e.g. a
time of '0' effectively disables advancement.
Note, this does not completely restore the original behavior of
lapic_timer_advance_ns. Prior to tracking the advancement per vCPU,
which is necessary to support autotuning, userspace could adjust
lapic_timer_advance_ns for *running* vCPU. With per-vCPU tracking, the
module params are snapshotted at vCPU creation, i.e. applying a new
advancement effectively requires restarting a VM.
Dynamically updating a running vCPU is possible, e.g. a helper could be
added to retrieve the desired delay, choosing between the global module
param and the per-VCPU value depending on whether or not auto-tuning is
(globally) enabled, but introduces a great deal of complexity. The
wrapper itself is not complex, but understanding and documenting the
effects of dynamically toggling auto-tuning and/or adjusting the timer
advancement is nigh impossible since the behavior would be dependent on
KVM's implementation as well as compiler optimizations. In other words,
providing stable behavior would require extremely careful consideration
now and in the future.
Given that the expected use of a manually-tuned timer advancement is to
"tune once, run many", use the vastly simpler approach of recognizing
changes to the module params only when creating a new vCPU.
Cc: Liran Alon <[email protected]>
Cc: Wanpeng Li <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Cc: [email protected]
Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically")
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 11 +++++++++--
arch/x86/kvm/lapic.h | 2 +-
arch/x86/kvm/x86.c | 9 +++++++--
3 files changed, 17 insertions(+), 5 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2260,7 +2260,7 @@ static enum hrtimer_restart apic_timer_f
return HRTIMER_NORESTART;
}
-int kvm_create_lapic(struct kvm_vcpu *vcpu, u32 timer_advance_ns)
+int kvm_create_lapic(struct kvm_vcpu *vcpu, int timer_advance_ns)
{
struct kvm_lapic *apic;
@@ -2284,7 +2284,14 @@ int kvm_create_lapic(struct kvm_vcpu *vc
hrtimer_init(&apic->lapic_timer.timer, CLOCK_MONOTONIC,
HRTIMER_MODE_ABS_PINNED);
apic->lapic_timer.timer.function = apic_timer_fn;
- apic->lapic_timer.timer_advance_ns = timer_advance_ns;
+ if (timer_advance_ns == -1) {
+ apic->lapic_timer.timer_advance_ns = 1000;
+ apic->lapic_timer.timer_advance_adjust_done = false;
+ } else {
+ apic->lapic_timer.timer_advance_ns = timer_advance_ns;
+ apic->lapic_timer.timer_advance_adjust_done = true;
+ }
+
/*
* APIC is created enabled. This will prevent kvm_lapic_set_base from
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -64,7 +64,7 @@ struct kvm_lapic {
struct dest_map;
-int kvm_create_lapic(struct kvm_vcpu *vcpu, u32 timer_advance_ns);
+int kvm_create_lapic(struct kvm_vcpu *vcpu, int timer_advance_ns);
void kvm_free_lapic(struct kvm_vcpu *vcpu);
int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu);
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -136,8 +136,13 @@ EXPORT_SYMBOL_GPL(kvm_default_tsc_scalin
static u32 __read_mostly tsc_tolerance_ppm = 250;
module_param(tsc_tolerance_ppm, uint, S_IRUGO | S_IWUSR);
-/* lapic timer advance (tscdeadline mode only) in nanoseconds */
-static u32 __read_mostly lapic_timer_advance_ns = 1000;
+/*
+ * lapic timer advance (tscdeadline mode only) in nanoseconds. '-1' enables
+ * adaptive tuning starting from default advancment of 1000ns. '0' disables
+ * advancement entirely. Any other value is used as-is and disables adaptive
+ * tuning, i.e. allows priveleged userspace to set an exact advancement time.
+ */
+static int __read_mostly lapic_timer_advance_ns = -1;
module_param(lapic_timer_advance_ns, uint, S_IRUGO | S_IWUSR);
static bool __read_mostly vector_hashing = true;
[ Upstream commit 94a9992f7dbdfb28976b565af220e0c4a117144a ]
Commit 71f6fa90a353 ("HID: increase maximum global item tag report size
to 256") increases the max report size from 128 to 256.
We also need to update the report size in hid_field_extract() otherwise
it complains and truncates now valid report size:
[ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1)
BugLink: https://bugs.launchpad.net/bugs/1818547
Fixes: 71f6fa90a353 ("HID: increase maximum global item tag report size to 256")
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/hid/hid-core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 9993b692598f..860e21ec6a49 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1301,10 +1301,10 @@ static u32 __extract(u8 *report, unsigned offset, int n)
u32 hid_field_extract(const struct hid_device *hid, u8 *report,
unsigned offset, unsigned n)
{
- if (n > 32) {
- hid_warn(hid, "hid_field_extract() called with n (%d) > 32! (%s)\n",
+ if (n > 256) {
+ hid_warn(hid, "hid_field_extract() called with n (%d) > 256! (%s)\n",
n, current->comm);
- n = 32;
+ n = 256;
}
return __extract(report, offset, n);
--
2.20.1
[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]
create_singlethread_workqueue may fail and return NULL. The fix checks if it is
NULL to avoid NULL pointer dereference. Also, the fix moves the call of
create_singlethread_workqueue earlier to avoid resource-release issues.
Signed-off-by: Kangjie Lu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/hid/hid-logitech-hidpp.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index f040c8a7f9a9..199cc256e9d9 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -2111,6 +2111,13 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
kfree(data);
return -ENOMEM;
}
+ data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
+ if (!data->wq) {
+ kfree(data->effect_ids);
+ kfree(data);
+ return -ENOMEM;
+ }
+
data->hidpp = hidpp;
data->feature_index = feature_index;
data->version = version;
@@ -2155,7 +2162,6 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
/* ignore boost value at response.fap.params[2] */
/* init the hardware command queue */
- data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
atomic_set(&data->workqueue_size, 0);
/* initialize with zero autocenter to get wheel in usable state */
--
2.20.1
[ Upstream commit dbee9c9c45846f003ec2f819710c2f4835630a6a ]
A memory save operation to 8-byte variable in RV32 is divided into
two sw instructions in the put_user macro. The current fixup returns
execution flow to the second sw instead of the one after it.
This patch fixes this fixup code according to the load access part.
Signed-off-by: Alan Kao<[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Vincent Chen <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/riscv/include/asm/uaccess.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index 637b896894fc..aa82df30e38a 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -301,7 +301,7 @@ do { \
" .balign 4\n" \
"4:\n" \
" li %0, %6\n" \
- " jump 2b, %1\n" \
+ " jump 3b, %1\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .balign " RISCV_SZPTR "\n" \
--
2.20.1
[ Upstream commit 924726888f660b2a86382a5dd051ec9ca1b18190 ]
The rk3328-roc-cc board exhibits tx stability issues with large packets,
as does the rock64 board, which was fixed with this patch
https://patchwork.kernel.org/patch/10178969/
A similar patch was merged for the rk3328-roc-cc here
https://patchwork.kernel.org/patch/10804863/
but it doesn't include the tx/rx_delay tweaks, and I find that they
help with an issue where large transfers would bring the ethernet
link down, causing a link reset regularly.
Signed-off-by: Leonidas P. Papadakos <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 99d0d9912950..a91f87df662e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -107,8 +107,8 @@
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x25>;
- rx_delay = <0x11>;
+ tx_delay = <0x24>;
+ rx_delay = <0x18>;
status = "okay";
};
--
2.20.1
[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]
When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:
rtc rtc0: invalid alarm value: 2019-03-14T255:255:255
sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled. __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.
Fix this by returning -1 instead, as this value is handled fine for all
fields.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/rtc/rtc-sh.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index d417b203cbc5..1d3de2a3d1a4 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -374,7 +374,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
{
unsigned int byte;
- int value = 0xff; /* return 0xff for ignored values */
+ int value = -1; /* return -1 for ignored values */
byte = readb(rtc->regbase + reg_off);
if (byte & AR_ENB) {
--
2.20.1
[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]
Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.
If we drop a packet, we should just continue to the next one as long as
the budget allows.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0ccf91a08290..f0e0593e54f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3328,9 +3328,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
{
struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
struct stmmac_channel *ch = &priv->channel[queue];
- unsigned int entry = rx_q->cur_rx;
+ unsigned int next_entry = rx_q->cur_rx;
int coe = priv->hw->rx_csum;
- unsigned int next_entry;
unsigned int count = 0;
bool xmac;
@@ -3348,10 +3347,12 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
stmmac_display_ring(priv, rx_head, DMA_RX_SIZE, true);
}
while (count < limit) {
- int status;
+ int entry, status;
struct dma_desc *p;
struct dma_desc *np;
+ entry = next_entry;
+
if (priv->extend_desc)
p = (struct dma_desc *)(rx_q->dma_erx + entry);
else
@@ -3412,7 +3413,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
"len %d larger than size (%d)\n",
frame_len, priv->dma_buf_sz);
priv->dev->stats.rx_length_errors++;
- break;
+ continue;
}
/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
@@ -3447,7 +3448,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
dev_warn(priv->device,
"packet dropped\n");
priv->dev->stats.rx_dropped++;
- break;
+ continue;
}
dma_sync_single_for_cpu(priv->device,
@@ -3472,7 +3473,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
"%s: Inconsistent Rx chain\n",
priv->dev->name);
priv->dev->stats.rx_dropped++;
- break;
+ continue;
}
prefetch(skb->data - NET_IP_ALIGN);
rx_q->rx_skbuff[entry] = NULL;
@@ -3507,7 +3508,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
priv->dev->stats.rx_packets++;
priv->dev->stats.rx_bytes += frame_len;
}
- entry = next_entry;
}
stmmac_rx_refill(priv, queue);
--
2.20.1
[ Upstream commit d6752e185c3168771787a02dc6a55f32260943cc ]
If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:
Unbalanced IRQ 166 wake disable
WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278
This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.
Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Evan Green <[email protected]>
Cc: Benson Leung <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Acked-By: Benson Leung <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/rtc/rtc-cros-ec.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
index e5444296075e..4d6bf9304ceb 100644
--- a/drivers/rtc/rtc-cros-ec.c
+++ b/drivers/rtc/rtc-cros-ec.c
@@ -298,7 +298,7 @@ static int cros_ec_rtc_suspend(struct device *dev)
struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);
if (device_may_wakeup(dev))
- enable_irq_wake(cros_ec_rtc->cros_ec->irq);
+ return enable_irq_wake(cros_ec_rtc->cros_ec->irq);
return 0;
}
@@ -309,7 +309,7 @@ static int cros_ec_rtc_resume(struct device *dev)
struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);
if (device_may_wakeup(dev))
- disable_irq_wake(cros_ec_rtc->cros_ec->irq);
+ return disable_irq_wake(cros_ec_rtc->cros_ec->irq);
return 0;
}
--
2.20.1
[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]
Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.
This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index c42ef6c729c0..5202d6ad7919 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
if (unlikely(rdes0 & RDES0_OWN))
return dma_own;
+ if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
+ stats->rx_length_errors++;
+ return discard_frame;
+ }
+
if (unlikely(rdes0 & RDES0_ERROR_SUMMARY)) {
if (unlikely(rdes0 & RDES0_DESCRIPTOR_ERROR)) {
x->rx_desc++;
--
2.20.1
[ Upstream commit b3ccbbce1e455b8454d3935eb9ae0a5f18939e24 ]
Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references",
2017-07-26) claims to be cleaning up references to 32-bit timespecs.
The actual contents of the commit make no sense, as it converts a call
to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the
change was documented in the commit message, and (b) timespec64_add_ns
supported negative numbers.
timespec64_add_ns doesn't work with signed deltas, because the
implementation is based around iter_div_u64_rem. This change resulted in
a regression where i40e_ptp_adjtime would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.
This commit doesn't appear to fix anything, is not well explained, and
introduces a bug, so lets just revert it.
Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26)
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ptp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index 5fb4353c742b..31575c0bb884 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -146,12 +146,13 @@ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
- struct timespec64 now;
+ struct timespec64 now, then;
+ then = ns_to_timespec64(delta);
mutex_lock(&pf->tmreg_lock);
i40e_ptp_read(pf, &now, NULL);
- timespec64_add_ns(&now, delta);
+ now = timespec64_add(now, then);
i40e_ptp_write(pf, (const struct timespec64 *)&now);
mutex_unlock(&pf->tmreg_lock);
--
2.20.1
[ Upstream commit 7d56bedb2730dc2ea8abf0fd7240ee99ecfee3c9 ]
We must not use legacy clock defines for dts clckctrl clocks as the offsets
will be wrong.
Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc")
Cc: Tero Kristo <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/boot/dts/am33xx-l4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 7b818d9d2eab..8396faa9ac28 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1763,7 +1763,7 @@
reg = <0xcc000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
@@ -1786,7 +1786,7 @@
reg = <0xd0000 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
--
2.20.1
[ Upstream commit ce856634af8cda3490947df8ac1ef5843e6356af ]
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/hid/hid-input.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 59a5608b8dc0..ff92a7b2fc89 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -995,6 +995,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x1b8: map_key_clear(KEY_VIDEO); break;
case 0x1bc: map_key_clear(KEY_MESSENGER); break;
case 0x1bd: map_key_clear(KEY_INFO); break;
+ case 0x1cb: map_key_clear(KEY_ASSISTANT); break;
case 0x201: map_key_clear(KEY_NEW); break;
case 0x202: map_key_clear(KEY_OPEN); break;
case 0x203: map_key_clear(KEY_CLOSE); break;
--
2.20.1
[ Upstream commit 1c41860864c8ae0387ef7d44f0000e99cbb2e06d ]
When doing unwind_frame() in the context of pseudo nmi (need enable
CONFIG_ARM64_PSEUDO_NMI), reaching the bottom of the stack (fp == 0,
pc != 0), function on_sdei_stack() will return true while the sdei acpi
table is not inited in fact. This will cause a "NULL pointer dereference"
oops when going on.
Reviewed-by: Julien Thierry <[email protected]>
Signed-off-by: Wei Li <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm64/kernel/sdei.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index 5ba4465e44f0..ea94cf8f9dc6 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -94,6 +94,9 @@ static bool on_sdei_normal_stack(unsigned long sp, struct stack_info *info)
unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr);
unsigned long high = low + SDEI_STACK_SIZE;
+ if (!low)
+ return false;
+
if (sp < low || sp >= high)
return false;
@@ -111,6 +114,9 @@ static bool on_sdei_critical_stack(unsigned long sp, struct stack_info *info)
unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr);
unsigned long high = low + SDEI_STACK_SIZE;
+ if (!low)
+ return false;
+
if (sp < low || sp >= high)
return false;
--
2.20.1
[ Upstream commit bcc816dfe51ab86ca94663c7b225f2d6eb0fddb9 ]
We would never be able to sort the list if we first reset plug->rq_count
which is used in conditional check later.
Fixes: ce5b009cff19 ("block: improve logic around when to sort a plug list")
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
block/blk-mq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 97eba6d23425..5a2585d69c81 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1716,11 +1716,12 @@ void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule)
unsigned int depth;
list_splice_init(&plug->mq_list, &list);
- plug->rq_count = 0;
if (plug->rq_count > 2 && plug->multiple_queues)
list_sort(NULL, &list, plug_rq_cmp);
+ plug->rq_count = 0;
+
this_q = NULL;
this_hctx = NULL;
this_ctx = NULL;
--
2.20.1
[ Upstream commit 669efc76b317b3aa550ffbf0b79d064cb00a5f96 ]
Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:
make O=DIR M=drivers/net/ethernet/hisilicon/hns3
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory
This patch fix it by adding $(srctree)/ prefix to the serach paths.
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
index fffe8c1c45d3..0fb61d440d3b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
@@ -3,7 +3,7 @@
# Makefile for the HISILICON network device drivers.
#
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
obj-$(CONFIG_HNS3_HCLGE) += hclge.o
hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o hclge_err.o hclge_debugfs.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
index fb93bbd35845..6193f8fa7cf3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -3,7 +3,7 @@
# Makefile for the HISILICON network device drivers.
#
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file
--
2.20.1
[ Upstream commit 5c1d260ed10cf08dd7a0299c103ad0a3f9a9f7a1 ]
The esw offloads structures share a union with the legacy mode structs.
Reset the offloads struct to zero in init to protect from null
assumptions made by the legacy mode code.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index d4e6fe5b9300..ce5766a26baa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -1402,6 +1402,7 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int nvports)
{
int err;
+ memset(&esw->fdb_table.offloads, 0, sizeof(struct offloads_fdb));
mutex_init(&esw->fdb_table.offloads.fdb_prio_lock);
err = esw_create_offloads_fdb_tables(esw, nvports);
--
2.20.1
[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]
Bond expects ethernet hwaddr for its slave, but it can be longer than 6
bytes - infiniband interface for example.
# cat /sys/devices/<skipped>/net/ib0/address
80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1
# cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
80:00:02:08:fe:80
So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.
Signed-off-by: Konstantin Khorenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/bonding/bond_sysfs_slave.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 2f120b2ffef0..4985268e2273 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);
static ssize_t perm_hwaddr_show(struct slave *slave, char *buf)
{
- return sprintf(buf, "%pM\n", slave->perm_hwaddr);
+ return sprintf(buf, "%*phC\n",
+ slave->dev->addr_len,
+ slave->perm_hwaddr);
}
static SLAVE_ATTR_RO(perm_hwaddr);
--
2.20.1
[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]
We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.
Fix by using exact buffer sizes.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
.../net/ethernet/stmicro/stmmac/descs_com.h | 22 ++++++++++++-------
.../ethernet/stmicro/stmmac/dwmac4_descs.c | 2 +-
.../ethernet/stmicro/stmmac/dwxgmac2_descs.c | 2 +-
.../net/ethernet/stmicro/stmmac/enh_desc.c | 10 ++++++---
drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
.../net/ethernet/stmicro/stmmac/norm_desc.c | 10 ++++++---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--
7 files changed, 35 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index 40d6356a7e73..3dfb07a78952 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -29,11 +29,13 @@
/* Specific functions used for Ring mode */
/* Enhanced descriptors */
-static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end,
+ int bfsize)
{
- p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
- << ERDES1_BUFFER2_SIZE_SHIFT)
- & ERDES1_BUFFER2_SIZE_MASK);
+ if (bfsize == BUF_SIZE_16KiB)
+ p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
+ << ERDES1_BUFFER2_SIZE_SHIFT)
+ & ERDES1_BUFFER2_SIZE_MASK);
if (end)
p->des1 |= cpu_to_le32(ERDES1_END_RING);
@@ -59,11 +61,15 @@ static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len)
}
/* Normal descriptors */
-static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end, int bfsize)
{
- p->des1 |= cpu_to_le32(((BUF_SIZE_2KiB - 1)
- << RDES1_BUFFER2_SIZE_SHIFT)
- & RDES1_BUFFER2_SIZE_MASK);
+ if (bfsize >= BUF_SIZE_2KiB) {
+ int bfsize2;
+
+ bfsize2 = min(bfsize - BUF_SIZE_2KiB + 1, BUF_SIZE_2KiB - 1);
+ p->des1 |= cpu_to_le32((bfsize2 << RDES1_BUFFER2_SIZE_SHIFT)
+ & RDES1_BUFFER2_SIZE_MASK);
+ }
if (end)
p->des1 |= cpu_to_le32(RDES1_END_RING);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 736e29635b77..313a58b68fee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -296,7 +296,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc,
}
static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
- int mode, int end)
+ int mode, int end, int bfsize)
{
dwmac4_set_rx_owner(p, disable_rx_ic);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
index 1d858fdec997..98fa471da7c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
@@ -123,7 +123,7 @@ static int dwxgmac2_get_rx_timestamp_status(void *desc, void *next_desc,
}
static void dwxgmac2_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
- int mode, int end)
+ int mode, int end, int bfsize)
{
dwxgmac2_set_rx_owner(p, disable_rx_ic);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 5ef91a790f9d..e8855e6adb48 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -259,15 +259,19 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
}
static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
- int mode, int end)
+ int mode, int end, int bfsize)
{
+ int bfsize1;
+
p->des0 |= cpu_to_le32(RDES0_OWN);
- p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
+
+ bfsize1 = min(bfsize, BUF_SIZE_8KiB);
+ p->des1 |= cpu_to_le32(bfsize1 & ERDES1_BUFFER1_SIZE_MASK);
if (mode == STMMAC_CHAIN_MODE)
ehn_desc_rx_set_on_chain(p);
else
- ehn_desc_rx_set_on_ring(p, end);
+ ehn_desc_rx_set_on_ring(p, end, bfsize);
if (disable_rx_ic)
p->des1 |= cpu_to_le32(ERDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 92b8944f26e3..5bb00234d961 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -33,7 +33,7 @@ struct dma_extended_desc;
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
void (*init_rx_desc)(struct dma_desc *p, int disable_rx_ic, int mode,
- int end);
+ int end, int bfsize);
/* DMA TX descriptor ring initialization */
void (*init_tx_desc)(struct dma_desc *p, int mode, int end);
/* Invoked by the xmit function to prepare the tx descriptor */
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index de65bb29feba..c55a9815b394 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -135,15 +135,19 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
}
static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
- int end)
+ int end, int bfsize)
{
+ int bfsize1;
+
p->des0 |= cpu_to_le32(RDES0_OWN);
- p->des1 |= cpu_to_le32((BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK);
+
+ bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1);
+ p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK);
if (mode == STMMAC_CHAIN_MODE)
ndesc_rx_set_on_chain(p, end);
else
- ndesc_rx_set_on_ring(p, end);
+ ndesc_rx_set_on_ring(p, end, bfsize);
if (disable_rx_ic)
p->des1 |= cpu_to_le32(RDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0bc3632880b5..f765869bd864 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1114,11 +1114,13 @@ static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
if (priv->extend_desc)
stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
priv->use_riwt, priv->mode,
- (i == DMA_RX_SIZE - 1));
+ (i == DMA_RX_SIZE - 1),
+ priv->dma_buf_sz);
else
stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
priv->use_riwt, priv->mode,
- (i == DMA_RX_SIZE - 1));
+ (i == DMA_RX_SIZE - 1),
+ priv->dma_buf_sz);
}
/**
--
2.20.1
[ Upstream commit f669d24f3dd00beab452c0fc9257f6a942ffca9b ]
The current check for WoL on i40e is broken. Code comment says only
magic packet is supported, so only check for that.
Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE)
Signed-off-by: Stefan Assmann <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index a6bc7847346b..5d544e661445 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -2378,8 +2378,7 @@ static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
return -EOPNOTSUPP;
/* only magic packet is supported */
- if (wol->wolopts && (wol->wolopts != WAKE_MAGIC)
- | (wol->wolopts != WAKE_FILTER))
+ if (wol->wolopts & ~WAKE_MAGIC)
return -EOPNOTSUPP;
/* is this a new value? */
--
2.20.1
From: Jeremy Fertic <[email protected]>
commit 45130fb030aec26ac28b4bb23344901df3ec3b7f upstream.
The calculation of the current dac value is using the wrong bits of the
dac lsb register. Create two macros to shift the lsb register value into
lsb position, depending on whether the dac is 10 or 12 bit. Initialize
data to 0 so, with an 8 bit dac, the msb register value can be bitwise
ORed with data.
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/addac/adt7316.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -47,6 +47,8 @@
#define ADT7516_MSB_AIN3 0xA
#define ADT7516_MSB_AIN4 0xB
#define ADT7316_DA_DATA_BASE 0x10
+#define ADT7316_DA_10_BIT_LSB_SHIFT 6
+#define ADT7316_DA_12_BIT_LSB_SHIFT 4
#define ADT7316_DA_MSB_DATA_REGS 4
#define ADT7316_LSB_DAC_A 0x10
#define ADT7316_MSB_DAC_A 0x11
@@ -1403,7 +1405,7 @@ static IIO_DEVICE_ATTR(ex_analog_temp_of
static ssize_t adt7316_show_DAC(struct adt7316_chip_info *chip,
int channel, char *buf)
{
- u16 data;
+ u16 data = 0;
u8 msb, lsb, offset;
int ret;
@@ -1428,7 +1430,11 @@ static ssize_t adt7316_show_DAC(struct a
if (ret)
return -EIO;
- data = (msb << offset) + (lsb & ((1 << offset) - 1));
+ if (chip->dac_bits == 12)
+ data = lsb >> ADT7316_DA_12_BIT_LSB_SHIFT;
+ else if (chip->dac_bits == 10)
+ data = lsb >> ADT7316_DA_10_BIT_LSB_SHIFT;
+ data |= msb << offset;
return sprintf(buf, "%d\n", data);
}
From: Thinh Nguyen <[email protected]>
commit c7152763f02e05567da27462b2277a554e507c89 upstream.
Currently req->num_trbs is not reset after the TRBs are skipped and
processed from the cancelled list. The gadget driver may reuse the
request with an invalid req->num_trbs, and DWC3 will incorrectly skip
trbs. To fix this, simply reset req->num_trbs to 0 after skipping
through all of them.
Fixes: c3acd5901414 ("usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()")
Signed-off-by: Thinh Nguyen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1506,6 +1506,8 @@ static void dwc3_gadget_ep_skip_trbs(str
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
dwc3_ep_inc_deq(dep);
}
+
+ req->num_trbs = 0;
}
static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
From: Jeremy Fertic <[email protected]>
commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.
The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.
The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/addac/adt7316.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1442,7 +1442,7 @@ static ssize_t adt7316_show_DAC(struct a
static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip,
int channel, const char *buf, size_t len)
{
- u8 msb, lsb, offset;
+ u8 msb, lsb, lsb_reg, offset;
u16 data;
int ret;
@@ -1460,9 +1460,13 @@ static ssize_t adt7316_store_DAC(struct
return -EINVAL;
if (chip->dac_bits > 8) {
- lsb = data & (1 << offset);
+ lsb = data & ((1 << offset) - 1);
+ if (chip->dac_bits == 12)
+ lsb_reg = lsb << ADT7316_DA_12_BIT_LSB_SHIFT;
+ else
+ lsb_reg = lsb << ADT7316_DA_10_BIT_LSB_SHIFT;
ret = chip->bus.write(chip->bus.client,
- ADT7316_DA_DATA_BASE + channel * 2, lsb);
+ ADT7316_DA_DATA_BASE + channel * 2, lsb_reg);
if (ret)
return -EIO;
}
From: Hans de Goede <[email protected]>
commit aee48a9ffa5a128bf4e433c57c39e015ea5b0208 upstream.
Commit 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map
headsetmic mapping"), changed the headsetmic mapping from IN3P to IN2P,
this was based on the observation that all bytcr_rt5651 devices I have
access to (7 devices) where all using IN3P for the headsetmic. This was
an attempt to unifify / simplify the mapping, but it was wrong.
None of those devices was actually using a digital internal mic. Now I've
access to a Point of View TAB-P1006W-232 (v1.0) tabler, which does use a
DMIC and it does have its headsetmic connected to IN2P, showing that the
original mapping was correct, so this commit reverts the change changing
the mapping back to IN2P.
Fixes: 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map ... mapping")
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -266,7 +266,7 @@ static const struct snd_soc_dapm_route b
static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = {
{"DMIC L1", NULL, "Internal Mic"},
{"DMIC R1", NULL, "Internal Mic"},
- {"IN3P", NULL, "Headset Mic"},
+ {"IN2P", NULL, "Headset Mic"},
};
static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {
[ Upstream commit ba5e60c9b75dec92d4c695b928f69300b17d7686 ]
of_find_device_by_node() takes a reference to the struct device
when it finds a match via get_device. When returning error we should
call put_device.
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Peng Hao <[email protected]>
Signed-off-by: Ludovic Desroches <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/mach-at91/pm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 51e808adb00c..2a757dcaa1a5 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -591,13 +591,13 @@ static int __init at91_pm_backup_init(void)
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
if (!np)
- goto securam_fail;
+ goto securam_fail_no_ref_dev;
pdev = of_find_device_by_node(np);
of_node_put(np);
if (!pdev) {
pr_warn("%s: failed to find securam device!\n", __func__);
- goto securam_fail;
+ goto securam_fail_no_ref_dev;
}
sram_pool = gen_pool_get(&pdev->dev, NULL);
@@ -620,6 +620,8 @@ static int __init at91_pm_backup_init(void)
return 0;
securam_fail:
+ put_device(&pdev->dev);
+securam_fail_no_ref_dev:
iounmap(pm_data.sfrbu);
pm_data.sfrbu = NULL;
return ret;
--
2.20.1
[ Upstream commit 2bafa1e9625400bec4c840a168d70ba52607a58d ]
Similar to commit edfc3722cfef ("HID: quirks: Fix keyboard + touchpad on
Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo
keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with
Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001,
which is not claimed by the elan_i2c driver, so key on that similar to
what was done for the Toshiba Click Mini.
Signed-off-by: Jeffrey Hugo <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/hid/hid-quirks.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 94088c0ed68a..e24790c988c0 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -744,7 +744,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
- { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
@@ -1025,6 +1024,10 @@ bool hid_ignore(struct hid_device *hdev)
if (hdev->product == 0x0401 &&
strncmp(hdev->name, "ELAN0800", 8) != 0)
return true;
+ /* Same with product id 0x0400 */
+ if (hdev->product == 0x0400 &&
+ strncmp(hdev->name, "QTEC0001", 8) != 0)
+ return true;
break;
}
--
2.20.1
From: Jiada Wang <[email protected]>
commit 8af6c521cc236534093f9e744cfa004314bfe5ae upstream.
Currently each SSI unit 's busif mode/adinr/dalign address is
registered by: (in busif4 case)
RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80)
RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80)
RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80)
But according to user manual 41.1.4 Register Configuration
ssi9 4/5/6/7 busif mode/adinr/dalign register address
( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] )
are out of this rule.
This patch registers ssi9 4/5/6/7 mode/adinr/dalign register
as single register, and access these registers in case of
SSI9 BUSIF 4/5/6/7.
Fixes: commit 8c9d75033340 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0")
Signed-off-by: Jiada Wang <[email protected]>
Signed-off-by: Timo Wischer <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/gen.c | 24 ++++++++++++++++++++++++
sound/soc/sh/rcar/rsnd.h | 27 +++++++++++++++++++++++++++
sound/soc/sh/rcar/ssiu.c | 24 +++++++++++-------------
3 files changed, 62 insertions(+), 13 deletions(-)
--- a/sound/soc/sh/rcar/gen.c
+++ b/sound/soc/sh/rcar/gen.c
@@ -255,6 +255,30 @@ static int rsnd_gen2_probe(struct rsnd_p
RSND_GEN_M_REG(SSI_MODE, 0xc, 0x80),
RSND_GEN_M_REG(SSI_CTRL, 0x10, 0x80),
RSND_GEN_M_REG(SSI_INT_ENABLE, 0x18, 0x80),
+ RSND_GEN_S_REG(SSI9_BUSIF0_MODE, 0x48c),
+ RSND_GEN_S_REG(SSI9_BUSIF0_ADINR, 0x484),
+ RSND_GEN_S_REG(SSI9_BUSIF0_DALIGN, 0x488),
+ RSND_GEN_S_REG(SSI9_BUSIF1_MODE, 0x4a0),
+ RSND_GEN_S_REG(SSI9_BUSIF1_ADINR, 0x4a4),
+ RSND_GEN_S_REG(SSI9_BUSIF1_DALIGN, 0x4a8),
+ RSND_GEN_S_REG(SSI9_BUSIF2_MODE, 0x4c0),
+ RSND_GEN_S_REG(SSI9_BUSIF2_ADINR, 0x4c4),
+ RSND_GEN_S_REG(SSI9_BUSIF2_DALIGN, 0x4c8),
+ RSND_GEN_S_REG(SSI9_BUSIF3_MODE, 0x4e0),
+ RSND_GEN_S_REG(SSI9_BUSIF3_ADINR, 0x4e4),
+ RSND_GEN_S_REG(SSI9_BUSIF3_DALIGN, 0x4e8),
+ RSND_GEN_S_REG(SSI9_BUSIF4_MODE, 0xd80),
+ RSND_GEN_S_REG(SSI9_BUSIF4_ADINR, 0xd84),
+ RSND_GEN_S_REG(SSI9_BUSIF4_DALIGN, 0xd88),
+ RSND_GEN_S_REG(SSI9_BUSIF5_MODE, 0xda0),
+ RSND_GEN_S_REG(SSI9_BUSIF5_ADINR, 0xda4),
+ RSND_GEN_S_REG(SSI9_BUSIF5_DALIGN, 0xda8),
+ RSND_GEN_S_REG(SSI9_BUSIF6_MODE, 0xdc0),
+ RSND_GEN_S_REG(SSI9_BUSIF6_ADINR, 0xdc4),
+ RSND_GEN_S_REG(SSI9_BUSIF6_DALIGN, 0xdc8),
+ RSND_GEN_S_REG(SSI9_BUSIF7_MODE, 0xde0),
+ RSND_GEN_S_REG(SSI9_BUSIF7_ADINR, 0xde4),
+ RSND_GEN_S_REG(SSI9_BUSIF7_DALIGN, 0xde8),
};
static const struct rsnd_regmap_field_conf conf_scu[] = {
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -191,6 +191,30 @@ enum rsnd_reg {
SSI_SYS_STATUS7,
HDMI0_SEL,
HDMI1_SEL,
+ SSI9_BUSIF0_MODE,
+ SSI9_BUSIF1_MODE,
+ SSI9_BUSIF2_MODE,
+ SSI9_BUSIF3_MODE,
+ SSI9_BUSIF4_MODE,
+ SSI9_BUSIF5_MODE,
+ SSI9_BUSIF6_MODE,
+ SSI9_BUSIF7_MODE,
+ SSI9_BUSIF0_ADINR,
+ SSI9_BUSIF1_ADINR,
+ SSI9_BUSIF2_ADINR,
+ SSI9_BUSIF3_ADINR,
+ SSI9_BUSIF4_ADINR,
+ SSI9_BUSIF5_ADINR,
+ SSI9_BUSIF6_ADINR,
+ SSI9_BUSIF7_ADINR,
+ SSI9_BUSIF0_DALIGN,
+ SSI9_BUSIF1_DALIGN,
+ SSI9_BUSIF2_DALIGN,
+ SSI9_BUSIF3_DALIGN,
+ SSI9_BUSIF4_DALIGN,
+ SSI9_BUSIF5_DALIGN,
+ SSI9_BUSIF6_DALIGN,
+ SSI9_BUSIF7_DALIGN,
/* SSI */
SSICR,
@@ -209,6 +233,9 @@ enum rsnd_reg {
#define SSI_BUSIF_MODE(i) (SSI_BUSIF0_MODE + (i))
#define SSI_BUSIF_ADINR(i) (SSI_BUSIF0_ADINR + (i))
#define SSI_BUSIF_DALIGN(i) (SSI_BUSIF0_DALIGN + (i))
+#define SSI9_BUSIF_MODE(i) (SSI9_BUSIF0_MODE + (i))
+#define SSI9_BUSIF_ADINR(i) (SSI9_BUSIF0_ADINR + (i))
+#define SSI9_BUSIF_DALIGN(i) (SSI9_BUSIF0_DALIGN + (i))
#define SSI_SYS_STATUS(i) (SSI_SYS_STATUS0 + (i))
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -181,28 +181,26 @@ static int rsnd_ssiu_init_gen2(struct rs
if (rsnd_ssi_use_busif(io)) {
int id = rsnd_mod_id(mod);
int busif = rsnd_mod_id_sub(mod);
+ enum rsnd_reg adinr_reg, mode_reg, dalign_reg;
- /*
- * FIXME
- *
- * We can't support SSI9-4/5/6/7, because its address is
- * out of calculation rule
- */
if ((id == 9) && (busif >= 4)) {
- struct device *dev = rsnd_priv_to_dev(priv);
-
- dev_err(dev, "This driver doesn't support SSI%d-%d, so far",
- id, busif);
+ adinr_reg = SSI9_BUSIF_ADINR(busif);
+ mode_reg = SSI9_BUSIF_MODE(busif);
+ dalign_reg = SSI9_BUSIF_DALIGN(busif);
+ } else {
+ adinr_reg = SSI_BUSIF_ADINR(busif);
+ mode_reg = SSI_BUSIF_MODE(busif);
+ dalign_reg = SSI_BUSIF_DALIGN(busif);
}
- rsnd_mod_write(mod, SSI_BUSIF_ADINR(busif),
+ rsnd_mod_write(mod, adinr_reg,
rsnd_get_adinr_bit(mod, io) |
(rsnd_io_is_play(io) ?
rsnd_runtime_channel_after_ctu(io) :
rsnd_runtime_channel_original(io)));
- rsnd_mod_write(mod, SSI_BUSIF_MODE(busif),
+ rsnd_mod_write(mod, mode_reg,
rsnd_get_busif_shift(io, mod) | 1);
- rsnd_mod_write(mod, SSI_BUSIF_DALIGN(busif),
+ rsnd_mod_write(mod, dalign_reg,
rsnd_get_dalign(mod, io));
}
[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 60e7d7ae3787..e5a7c0761dbd 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -376,8 +376,6 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
wmb(); /* commit all data before submit */
assert(skb->queue_mapping < priv->ae_handle->q_num);
hnae_queue_xmit(priv->ae_handle->qs[skb->queue_mapping], buf_num);
- ring->stats.tx_pkts++;
- ring->stats.tx_bytes += skb->len;
return NETDEV_TX_OK;
@@ -999,6 +997,9 @@ static int hns_nic_tx_poll_one(struct hns_nic_ring_data *ring_data,
/* issue prefetch for next Tx descriptor */
prefetch(&ring->desc_cb[ring->next_to_clean]);
}
+ /* update tx ring statistics. */
+ ring->stats.tx_pkts += pkts;
+ ring->stats.tx_bytes += bytes;
NETIF_TX_UNLOCK(ring);
--
2.20.1
[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index e5a7c0761dbd..4cd86ba1f050 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -29,9 +29,6 @@
#define SERVICE_TIMER_HZ (1 * HZ)
-#define NIC_TX_CLEAN_MAX_NUM 256
-#define NIC_RX_CLEAN_MAX_NUM 64
-
#define RCB_IRQ_NOT_INITED 0
#define RCB_IRQ_INITED 1
#define HNS_BUFFER_SIZE_2048 2048
@@ -2153,7 +2150,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
hns_nic_tx_fini_pro_v2;
netif_napi_add(priv->netdev, &rd->napi,
- hns_nic_common_poll, NIC_TX_CLEAN_MAX_NUM);
+ hns_nic_common_poll, NAPI_POLL_WEIGHT);
rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
}
for (i = h->q_num; i < h->q_num * 2; i++) {
@@ -2166,7 +2163,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
hns_nic_rx_fini_pro_v2;
netif_napi_add(priv->netdev, &rd->napi,
- hns_nic_common_poll, NIC_RX_CLEAN_MAX_NUM);
+ hns_nic_common_poll, NAPI_POLL_WEIGHT);
rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
}
--
2.20.1
From: Kim Phillips <[email protected]>
commit 0e3b74e26280f2cf8753717a950b97d424da6046 upstream.
Add a new amd_hw_cache_event_ids_f17h assignment structure set
for AMD families 17h and above, since a lot has changed. Specifically:
L1 Data Cache
The data cache access counter remains the same on Family 17h.
For DC misses, PMCx041's definition changes with Family 17h,
so instead we use the L2 cache accesses from L1 data cache
misses counter (PMCx060,umask=0xc8).
For DC hardware prefetch events, Family 17h breaks compatibility
for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware
Prefetch DC Fills."
L1 Instruction Cache
PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward
compatible on Family 17h.
For prefetches, we remove the erroneous PMCx04B assignment which
counts how many software data cache prefetch load instructions were
dispatched.
LL - Last Level Cache
Removing PMCs 7D, 7E, and 7F assignments, as they do not exist
on Family 17h, where the last level cache is L3. L3 counters
can be accessed using the existing AMD Uncore driver.
Data TLB
On Intel machines, data TLB accesses ("dTLB-loads") are assigned
to counters that count load/store instructions retired. This
is inconsistent with instruction TLB accesses, where Intel
implementations report iTLB misses that hit in the STLB.
Ideally, dTLB-loads would count higher level dTLB misses that hit
in lower level TLBs, and dTLB-load-misses would report those
that also missed in those lower-level TLBs, therefore causing
a page table walk. That would be consistent with instruction
TLB operation, remove the redundancy between dTLB-loads and
L1-dcache-loads, and prevent perf from producing artificially
low percentage ratios, i.e. the "0.01%" below:
42,550,869 L1-dcache-loads
41,591,860 dTLB-loads
4,802 dTLB-load-misses # 0.01% of all dTLB cache hits
7,283,682 L1-dcache-stores
7,912,392 dTLB-stores
310 dTLB-store-misses
On AMD Families prior to 17h, the "Data Cache Accesses" counter is
used, which is slightly better than load/store instructions retired,
but still counts in terms of individual load/store operations
instead of TLB operations.
So, for AMD Families 17h and higher, this patch assigns "dTLB-loads"
to a counter for L1 dTLB misses that hit in the L2 dTLB, and
"dTLB-load-misses" to a counter for L1 DTLB misses that caused
L2 DTLB misses and therefore also caused page table walks. This
results in a much more accurate view of data TLB performance:
60,961,781 L1-dcache-loads
4,601 dTLB-loads
963 dTLB-load-misses # 20.93% of all dTLB cache hits
Note that for all AMD families, data loads and stores are combined
in a single accesses counter, so no 'L1-dcache-stores' are reported
separately, and stores are counted with loads in 'L1-dcache-loads'.
Also note that the "% of all dTLB cache hits" string is misleading
because (a) "dTLB cache": although TLBs can be considered caches for
page tables, in this context, it can be misinterpreted as data cache
hits because the figures are similar (at least on Intel), and (b) not
all those loads (technically accesses) technically "hit" at that
hardware level. "% of all dTLB accesses" would be more clear/accurate.
Instruction TLB
On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the
STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in
the STLB and completed a page table walk.
For AMD Family 17h and above, for 'iTLB-loads' we replace the
erroneous instruction cache fetches counter with PMCx084
"L1 ITLB Miss, L2 ITLB Hit".
For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss,
L2 ITLB Miss", but set a 0xff umask because without it the event
does not get counted.
Branch Predictor (BPU)
PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families.
Node Level Events
Family 17h does not have a PMCx0e9 counter, and corresponding counters
have not been made available publicly, so for now, we mark them as
unsupported for Families 17h and above.
Reference:
"Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh"
Released 7/17/2018, Publication #56255, Revision 3.03:
https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
[ mingo: tidied up the line breaks. ]
Signed-off-by: Kim Phillips <[email protected]>
Cc: <[email protected]> # v4.9+
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Janakarajan Natarajan <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pu Wen <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Lendacky <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/amd/core.c | 111 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 108 insertions(+), 3 deletions(-)
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -116,6 +116,110 @@ static __initconst const u64 amd_hw_cach
},
};
+static __initconst const u64 amd_hw_cache_event_ids_f17h
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x0040, /* Data Cache Accesses */
+ [C(RESULT_MISS)] = 0xc860, /* L2$ access from DC Miss */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0xff5a, /* h/w prefetch DC Fills */
+ [C(RESULT_MISS)] = 0,
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x0080, /* Instruction cache fetches */
+ [C(RESULT_MISS)] = 0x0081, /* Instruction cache misses */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0xff45, /* All L2 DTLB accesses */
+ [C(RESULT_MISS)] = 0xf045, /* L2 DTLB misses (PT walks) */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x0084, /* L1 ITLB misses, L2 ITLB hits */
+ [C(RESULT_MISS)] = 0xff85, /* L1 ITLB misses, L2 misses */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+},
+[C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x00c2, /* Retired Branch Instr. */
+ [C(RESULT_MISS)] = 0x00c3, /* Retired Mispredicted BI */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+},
+[C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = 0,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+},
+};
+
/*
* AMD Performance Monitor K7 and later, up to and including Family 16h:
*/
@@ -865,9 +969,10 @@ __init int amd_pmu_init(void)
x86_pmu.amd_nb_constraints = 0;
}
- /* Events are common for all AMDs */
- memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
- sizeof(hw_cache_event_ids));
+ if (boot_cpu_data.x86 >= 0x17)
+ memcpy(hw_cache_event_ids, amd_hw_cache_event_ids_f17h, sizeof(hw_cache_event_ids));
+ else
+ memcpy(hw_cache_event_ids, amd_hw_cache_event_ids, sizeof(hw_cache_event_ids));
return 0;
}
[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ]
BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.
This patch removes BITS_TO_LONGS() to fix this
issue.
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
index 74849be5f004..e2919005ead3 100644
--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
@@ -354,7 +354,10 @@ static struct cxgbi_ppm_pool *ppm_alloc_cpu_pool(unsigned int *total,
ppmax = max;
/* pool size must be multiple of unsigned long */
- bmap = BITS_TO_LONGS(ppmax);
+ bmap = ppmax / BITS_PER_TYPE(unsigned long);
+ if (!bmap)
+ return NULL;
+
ppmax = (bmap * sizeof(unsigned long)) << 3;
alloc_sz = sizeof(*pools) + sizeof(unsigned long) * bmap;
@@ -402,6 +405,10 @@ int cxgbi_ppm_init(void **ppm_pp, struct net_device *ndev,
if (reserve_factor) {
ppmax_pool = ppmax / reserve_factor;
pool = ppm_alloc_cpu_pool(&ppmax_pool, &pool_index_max);
+ if (!pool) {
+ ppmax_pool = 0;
+ reserve_factor = 0;
+ }
pr_debug("%s: ppmax %u, cpu total %u, per cpu %u.\n",
ndev->name, ppmax, ppmax_pool, pool_index_max);
--
2.20.1
From: Dmitry Torokhov <[email protected]>
commit 937c4e552fd1174784045684740edfcea536159d upstream.
We need to turn regulators on and off when switching brightness, and
that may block, therefore we have to set stmfts_brightness_set() as
LED's brightness_set_blocking() method.
Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Acked-by: Andi Shyti <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/stmfts.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -106,27 +106,29 @@ struct stmfts_data {
bool running;
};
-static void stmfts_brightness_set(struct led_classdev *led_cdev,
+static int stmfts_brightness_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct stmfts_data *sdata = container_of(led_cdev,
struct stmfts_data, led_cdev);
int err;
- if (value == sdata->led_status || !sdata->ledvdd)
- return;
-
- if (!value) {
- regulator_disable(sdata->ledvdd);
- } else {
- err = regulator_enable(sdata->ledvdd);
- if (err)
- dev_warn(&sdata->client->dev,
- "failed to disable ledvdd regulator: %d\n",
- err);
+ if (value != sdata->led_status && sdata->ledvdd) {
+ if (!value) {
+ regulator_disable(sdata->ledvdd);
+ } else {
+ err = regulator_enable(sdata->ledvdd);
+ if (err) {
+ dev_warn(&sdata->client->dev,
+ "failed to disable ledvdd regulator: %d\n",
+ err);
+ return err;
+ }
+ }
+ sdata->led_status = value;
}
- sdata->led_status = value;
+ return 0;
}
static enum led_brightness stmfts_brightness_get(struct led_classdev *led_cdev)
@@ -608,7 +610,7 @@ static int stmfts_enable_led(struct stmf
sdata->led_cdev.name = STMFTS_DEV_NAME;
sdata->led_cdev.max_brightness = LED_ON;
sdata->led_cdev.brightness = LED_OFF;
- sdata->led_cdev.brightness_set = stmfts_brightness_set;
+ sdata->led_cdev.brightness_set_blocking = stmfts_brightness_set;
sdata->led_cdev.brightness_get = stmfts_brightness_get;
err = devm_led_classdev_register(&sdata->client->dev, &sdata->led_cdev);
From: Sean Wang <[email protected]>
commit 77f328dbc6cf42f22c691a164958a5452142a542 upstream.
Restore bdev->tx_state with clearing bit BTMTKUART_TX_WAIT_VND_EVT
when there is an error on waiting for the corresponding event.
Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices")
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btmtkuart.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -115,11 +115,13 @@ static int mtk_hci_wmt_sync(struct hci_d
TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
if (err == -EINTR) {
bt_dev_err(hdev, "Execution of wmt command interrupted");
+ clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return err;
}
if (err) {
bt_dev_err(hdev, "Execution of wmt command timed out");
+ clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return -ETIMEDOUT;
}
[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]
When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the
allocated resv_map is lost and the structure is leaked.
Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/
resv_map structures are only needed for inodes which can have associated
page allocations. To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Reported-by: Yufen Yu <[email protected]>
Suggested-by: Yufen Yu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
fs/hugetlbfs/inode.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index a7fa037b876b..a3a3d256fb0e 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -741,11 +741,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
umode_t mode, dev_t dev)
{
struct inode *inode;
- struct resv_map *resv_map;
+ struct resv_map *resv_map = NULL;
- resv_map = resv_map_alloc();
- if (!resv_map)
- return NULL;
+ /*
+ * Reserve maps are only needed for inodes that can have associated
+ * page allocations.
+ */
+ if (S_ISREG(mode) || S_ISLNK(mode)) {
+ resv_map = resv_map_alloc();
+ if (!resv_map)
+ return NULL;
+ }
inode = new_inode(sb);
if (inode) {
@@ -780,8 +786,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
break;
}
lockdep_annotate_inode_mutex_key(inode);
- } else
- kref_put(&resv_map->refs, resv_map_release);
+ } else {
+ if (resv_map)
+ kref_put(&resv_map->refs, resv_map_release);
+ }
return inode;
}
--
2.20.1
From: Alexander Wetzel <[email protected]>
commit 78ad2341521d5ea96cb936244ed4c4c4ef9ec13b upstream.
Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast
keys, the original override was intended to be done for group keys as
those are treated specially by mac80211 and would always have been
rejected.
Now the situation is that AP_VLAN support must be enabled by the driver
if it can support it (meaning it can support software crypto GTK TX).
Thus, also simplify the code - if we get here with AP_VLAN and non-
pairwise key, software crypto must be used (driver doesn't know about
the interface) and can be used (driver must've advertised AP_VLAN if
it also uses SW_CRYPTO_CONTROL).
Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices")
Signed-off-by: Alexander Wetzel <[email protected]>
[rewrite commit message]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/key.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -167,8 +167,10 @@ static int ieee80211_key_enable_hw_accel
* The driver doesn't know anything about VLAN interfaces.
* Hence, don't send GTKs for VLAN interfaces to the driver.
*/
- if (!(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ if (!(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ ret = 1;
goto out_unsupported;
+ }
}
ret = drv_set_key(key->local, SET_KEY, sdata,
@@ -213,11 +215,8 @@ static int ieee80211_key_enable_hw_accel
/* all of these we can do in software - if driver can */
if (ret == 1)
return 0;
- if (ieee80211_hw_check(&key->local->hw, SW_CRYPTO_CONTROL)) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- return 0;
+ if (ieee80211_hw_check(&key->local->hw, SW_CRYPTO_CONTROL))
return -EINVAL;
- }
return 0;
default:
return -EINVAL;
From: Bart Van Assche <[email protected]>
commit 40ca8757291ca7a8775498112d320205b2a2e571 upstream.
Make sure that the next time a response is sent to the initiator that the
credit it had allocated for the aborted request gets freed.
Cc: Doug Ledford <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Nicholas Bellinger <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Fixes: 131e6abc674e ("target: Add TFO->abort_task for aborted task resources release") # v3.15
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -2887,8 +2887,19 @@ static void srpt_queue_tm_rsp(struct se_
srpt_queue_response(cmd);
}
+/*
+ * This function is called for aborted commands if no response is sent to the
+ * initiator. Make sure that the credits freed by aborting a command are
+ * returned to the initiator the next time a response is sent by incrementing
+ * ch->req_lim_delta.
+ */
static void srpt_aborted_task(struct se_cmd *cmd)
{
+ struct srpt_send_ioctx *ioctx = container_of(cmd,
+ struct srpt_send_ioctx, cmd);
+ struct srpt_rdma_ch *ch = ioctx->ch;
+
+ atomic_inc(&ch->req_lim_delta);
}
static int srpt_queue_status(struct se_cmd *cmd)
From: Jacopo Mondi <[email protected]>
commit 61da76beef1e4f0b6ba7be4f8d0cf0dac7ce1f55 upstream.
The following commits:
commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675")
commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll for ov7675")
introduced the ability to bypass PLL multiplier and use input clock (xvclk)
as pixel clock output frequency for ov7675 sensor.
PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675
sensor manuals. Macros used to set DBLV register seem wrong in the
driver, as their values do not match what reported in the datasheet.
Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to
default 0x0a reserved value (according to datasheets).
While at there, remove a write to DBLV register in
"ov7675_set_framerate()" that over-writes the previous one to the same
register that takes "info->pll_bypass" flag into account instead of setting PLL
multiplier to 4x unconditionally.
And, while at there, since "info->pll_bypass" is only used in
set/get_framerate() functions used by ov7675 only, it is not necessary
to check for the device id at probe time to make sure that when using
ov7670 "info->pll_bypass" is set to false.
Fixes: f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675")
Signed-off-by: Jacopo Mondi <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov7670.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -160,10 +160,10 @@ MODULE_PARM_DESC(debug, "Debug level (0-
#define REG_GFIX 0x69 /* Fix gain control */
#define REG_DBLV 0x6b /* PLL control an debugging */
-#define DBLV_BYPASS 0x00 /* Bypass PLL */
-#define DBLV_X4 0x01 /* clock x4 */
-#define DBLV_X6 0x10 /* clock x6 */
-#define DBLV_X8 0x11 /* clock x8 */
+#define DBLV_BYPASS 0x0a /* Bypass PLL */
+#define DBLV_X4 0x4a /* clock x4 */
+#define DBLV_X6 0x8a /* clock x6 */
+#define DBLV_X8 0xca /* clock x8 */
#define REG_SCALING_XSC 0x70 /* Test pattern and horizontal scale factor */
#define TEST_PATTTERN_0 0x80
@@ -863,7 +863,7 @@ static int ov7675_set_framerate(struct v
if (ret < 0)
return ret;
- return ov7670_write(sd, REG_DBLV, DBLV_X4);
+ return 0;
}
static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -1801,11 +1801,7 @@ static int ov7670_probe(struct i2c_clien
if (config->clock_speed)
info->clock_speed = config->clock_speed;
- /*
- * It should be allowed for ov7670 too when it is migrated to
- * the new frame rate formula.
- */
- if (config->pll_bypass && id->driver_data != MODEL_OV7670)
+ if (config->pll_bypass)
info->pll_bypass = true;
if (config->pclk_hb_disable)
From: Peter Zijlstra <[email protected]>
commit 780e0106d468a2962b16b52fdf42898f2639e0a0 upstream.
Revert the following commit:
515ab7c41306: ("x86/mm: Align TLB invalidation info")
I found out (the hard way) that under some .config options (notably L1_CACHE_SHIFT=7)
and compiler combinations this on-stack alignment leads to a 320 byte
stack usage, which then triggers a KASAN stack warning elsewhere.
Using 320 bytes of stack space for a 40 byte structure is ludicrous and
clearly not right.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Nadav Amit <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 515ab7c41306 ("x86/mm: Align TLB invalidation info")
Link: http://lkml.kernel.org/r/[email protected]
[ Minor changelog edits. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/tlb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -731,7 +731,7 @@ void flush_tlb_mm_range(struct mm_struct
{
int cpu;
- struct flush_tlb_info info __aligned(SMP_CACHE_BYTES) = {
+ struct flush_tlb_info info = {
.mm = mm,
.stride_shift = stride_shift,
.freed_tables = freed_tables,
From: Jerome Brunet <[email protected]>
commit 6246f283d5e02ac757bd8d9bacde8fdc54c4582d upstream.
If for any reason, the backend does not have the requested substream
(like capture on a playback only backend), the BE will be skipped in
dpcm_be_dai_startup().
However, dpcm_apply_symmetry() does not skip those BE and will
dereference the be_substream (NULL) pointer anyway.
Like in dpcm_be_dai_startup(), just skip those BE.
Fixes: 906c7d690c3b ("ASoC: dpcm: Apply symmetry for DPCM")
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-pcm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1895,10 +1895,15 @@ static int dpcm_apply_symmetry(struct sn
struct snd_soc_pcm_runtime *be = dpcm->be;
struct snd_pcm_substream *be_substream =
snd_soc_dpcm_get_substream(be, stream);
- struct snd_soc_pcm_runtime *rtd = be_substream->private_data;
+ struct snd_soc_pcm_runtime *rtd;
struct snd_soc_dai *codec_dai;
int i;
+ /* A backend may not have the requested substream */
+ if (!be_substream)
+ continue;
+
+ rtd = be_substream->private_data;
if (rtd->dai_link->be_hw_params_fixup)
continue;
From: Yuval Avnery <[email protected]>
commit 535005ca8e5e71918d64074032f4b9d4fef8981e upstream.
The open-coded variant missed destroy of SELinux created QP, reuse already
existing ib_detroy_qp() call and use this opportunity to clean
ib_create_qp() from double prints and unclear exit paths.
Reported-by: Parav Pandit <[email protected]>
Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Yuval Avnery <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Reviewed-by: Daniel Jurgens <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/verbs.c | 41 +++++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 17 deletions(-)
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -1106,8 +1106,8 @@ struct ib_qp *ib_open_qp(struct ib_xrcd
}
EXPORT_SYMBOL(ib_open_qp);
-static struct ib_qp *ib_create_xrc_qp(struct ib_qp *qp,
- struct ib_qp_init_attr *qp_init_attr)
+static struct ib_qp *create_xrc_qp(struct ib_qp *qp,
+ struct ib_qp_init_attr *qp_init_attr)
{
struct ib_qp *real_qp = qp;
@@ -1122,10 +1122,10 @@ static struct ib_qp *ib_create_xrc_qp(st
qp = __ib_open_qp(real_qp, qp_init_attr->event_handler,
qp_init_attr->qp_context);
- if (!IS_ERR(qp))
- __ib_insert_xrcd_qp(qp_init_attr->xrcd, real_qp);
- else
- real_qp->device->ops.destroy_qp(real_qp);
+ if (IS_ERR(qp))
+ return qp;
+
+ __ib_insert_xrcd_qp(qp_init_attr->xrcd, real_qp);
return qp;
}
@@ -1156,10 +1156,8 @@ struct ib_qp *ib_create_qp(struct ib_pd
return qp;
ret = ib_create_qp_security(qp, device);
- if (ret) {
- ib_destroy_qp(qp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err;
qp->real_qp = qp;
qp->qp_type = qp_init_attr->qp_type;
@@ -1172,8 +1170,15 @@ struct ib_qp *ib_create_qp(struct ib_pd
INIT_LIST_HEAD(&qp->sig_mrs);
qp->port = 0;
- if (qp_init_attr->qp_type == IB_QPT_XRC_TGT)
- return ib_create_xrc_qp(qp, qp_init_attr);
+ if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) {
+ struct ib_qp *xrc_qp = create_xrc_qp(qp, qp_init_attr);
+
+ if (IS_ERR(xrc_qp)) {
+ ret = PTR_ERR(xrc_qp);
+ goto err;
+ }
+ return xrc_qp;
+ }
qp->event_handler = qp_init_attr->event_handler;
qp->qp_context = qp_init_attr->qp_context;
@@ -1200,11 +1205,8 @@ struct ib_qp *ib_create_qp(struct ib_pd
if (qp_init_attr->cap.max_rdma_ctxs) {
ret = rdma_rw_init_mrs(qp, qp_init_attr);
- if (ret) {
- pr_err("failed to init MR pool ret= %d\n", ret);
- ib_destroy_qp(qp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err;
}
/*
@@ -1217,6 +1219,11 @@ struct ib_qp *ib_create_qp(struct ib_pd
device->attrs.max_sge_rd);
return qp;
+
+err:
+ ib_destroy_qp(qp);
+ return ERR_PTR(ret);
+
}
EXPORT_SYMBOL(ib_create_qp);
[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]
If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.
[ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[ 10.681826] Faulting instruction address: 0xc0431480
[ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[ 10.682387] Modules linked in:
[ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2
[ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8
[ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+)
[ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000
[ 10.683236] DEAR: 00000040 ESR: 00000000
[ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[ 10.684602] Call Trace:
[ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[ 10.687349] Instruction dump:
[ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]---
Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.
Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/block/xsysace.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 87ccef4bd69e..32a21b8d1d85 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1090,6 +1090,8 @@ static int ace_setup(struct ace_device *ace)
return 0;
err_read:
+ /* prevent double queue cleanup */
+ ace->gd->queue = NULL;
put_disk(ace->gd);
err_alloc_disk:
blk_cleanup_queue(ace->queue);
--
2.20.1
[ Upstream commit 10dce8af34226d90fa56746a934f8da5dcdba3df ]
Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.
This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.
The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.
However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.
See
https://lore.kernel.org/lkml/[email protected]/
https://lwn.net/Articles/180387
https://lwn.net/Articles/180396
for historic context.
The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:
kernel/power/user.c snapshot_read
fs/debugfs/file.c u32_array_read
fs/fuse/control.c fuse_conn_waiting_read + ...
drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read
arch/s390/hypfs/inode.c hypfs_read_iter
...
Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.
Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.
FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:
See
https://github.com/libfuse/osspd
https://lwn.net/Articles/308445
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510
Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216
I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:
https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169
Let's fix this regression. The plan is:
1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
doing so would break many in-kernel nonseekable_open users which
actually use ppos in read/write handlers.
2. Add stream_open() to kernel to open stream-like non-seekable file
descriptors. Read and write on such file descriptors would never use
nor change ppos. And with that property on stream-like files read and
write will be running without taking f_pos lock - i.e. read and write
could be running simultaneously.
3. With semantic patch search and convert to stream_open all in-kernel
nonseekable_open users for which read and write actually do not
depend on ppos and where there is no other methods in file_operations
which assume @offset access.
4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
steam_open if that bit is present in filesystem open reply.
It was tempting to change fs/fuse/ open handler to use stream_open
instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and
write handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
from v3.14+ (the kernel where 9c225f2655 first appeared).
This will allow to patch OSSPD and other FUSE filesystems that
provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
in their open handler and this way avoid the deadlock on all kernel
versions. This should work because fs/fuse/ ignores unknown open
flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel
that is not aware of FOPEN_STREAM will be < v3.14 where just
FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
write deadlock.
This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.
Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.
The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Cc: Michael Kerrisk <[email protected]>
Cc: Yongzhi Pan <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Kirill Tkhai <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Nikolaus Rath <[email protected]>
Cc: Han-Wen Nienhuys <[email protected]>
Signed-off-by: Kirill Smelkov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/xen/xenbus/xenbus_dev_frontend.c | 4 +-
fs/open.c | 18 ++
fs/read_write.c | 5 +-
include/linux/fs.h | 4 +
scripts/coccinelle/api/stream_open.cocci | 363 +++++++++++++++++++++++
5 files changed, 389 insertions(+), 5 deletions(-)
create mode 100644 scripts/coccinelle/api/stream_open.cocci
diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c
index c3e201025ef0..0782ff3c2273 100644
--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -622,9 +622,7 @@ static int xenbus_file_open(struct inode *inode, struct file *filp)
if (xen_store_evtchn == 0)
return -ENOENT;
- nonseekable_open(inode, filp);
-
- filp->f_mode &= ~FMODE_ATOMIC_POS; /* cdev-style semantics */
+ stream_open(inode, filp);
u = kzalloc(sizeof(*u), GFP_KERNEL);
if (u == NULL)
diff --git a/fs/open.c b/fs/open.c
index f1c2f855fd43..a00350018a47 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1215,3 +1215,21 @@ int nonseekable_open(struct inode *inode, struct file *filp)
}
EXPORT_SYMBOL(nonseekable_open);
+
+/*
+ * stream_open is used by subsystems that want stream-like file descriptors.
+ * Such file descriptors are not seekable and don't have notion of position
+ * (file.f_pos is always 0). Contrary to file descriptors of other regular
+ * files, .read() and .write() can run simultaneously.
+ *
+ * stream_open never fails and is marked to return int so that it could be
+ * directly used as file_operations.open .
+ */
+int stream_open(struct inode *inode, struct file *filp)
+{
+ filp->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE | FMODE_ATOMIC_POS);
+ filp->f_mode |= FMODE_STREAM;
+ return 0;
+}
+
+EXPORT_SYMBOL(stream_open);
diff --git a/fs/read_write.c b/fs/read_write.c
index 27b69b85d49f..3d3194e32201 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -560,12 +560,13 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_
static inline loff_t file_pos_read(struct file *file)
{
- return file->f_pos;
+ return file->f_mode & FMODE_STREAM ? 0 : file->f_pos;
}
static inline void file_pos_write(struct file *file, loff_t pos)
{
- file->f_pos = pos;
+ if ((file->f_mode & FMODE_STREAM) == 0)
+ file->f_pos = pos;
}
ssize_t ksys_read(unsigned int fd, char __user *buf, size_t count)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index fd423fec8d83..09ce2646c78a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -153,6 +153,9 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
#define FMODE_OPENED ((__force fmode_t)0x80000)
#define FMODE_CREATED ((__force fmode_t)0x100000)
+/* File is stream-like */
+#define FMODE_STREAM ((__force fmode_t)0x200000)
+
/* File was opened by fanotify and shouldn't generate fanotify events */
#define FMODE_NONOTIFY ((__force fmode_t)0x4000000)
@@ -3074,6 +3077,7 @@ extern loff_t no_seek_end_llseek_size(struct file *, loff_t, int, loff_t);
extern loff_t no_seek_end_llseek(struct file *, loff_t, int);
extern int generic_file_open(struct inode * inode, struct file * filp);
extern int nonseekable_open(struct inode * inode, struct file * filp);
+extern int stream_open(struct inode * inode, struct file * filp);
#ifdef CONFIG_BLOCK
typedef void (dio_submit_t)(struct bio *bio, struct inode *inode,
diff --git a/scripts/coccinelle/api/stream_open.cocci b/scripts/coccinelle/api/stream_open.cocci
new file mode 100644
index 000000000000..350145da7669
--- /dev/null
+++ b/scripts/coccinelle/api/stream_open.cocci
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+// Author: Kirill Smelkov ([email protected])
+//
+// Search for stream-like files that are using nonseekable_open and convert
+// them to stream_open. A stream-like file is a file that does not use ppos in
+// its read and write. Rationale for the conversion is to avoid deadlock in
+// between read and write.
+
+virtual report
+virtual patch
+virtual explain // explain decisions in the patch (SPFLAGS="-D explain")
+
+// stream-like reader & writer - ones that do not depend on f_pos.
+@ stream_reader @
+identifier readstream, ppos;
+identifier f, buf, len;
+type loff_t;
+@@
+ ssize_t readstream(struct file *f, char *buf, size_t len, loff_t *ppos)
+ {
+ ... when != ppos
+ }
+
+@ stream_writer @
+identifier writestream, ppos;
+identifier f, buf, len;
+type loff_t;
+@@
+ ssize_t writestream(struct file *f, const char *buf, size_t len, loff_t *ppos)
+ {
+ ... when != ppos
+ }
+
+
+// a function that blocks
+@ blocks @
+identifier block_f;
+identifier wait_event =~ "^wait_event_.*";
+@@
+ block_f(...) {
+ ... when exists
+ wait_event(...)
+ ... when exists
+ }
+
+// stream_reader that can block inside.
+//
+// XXX wait_* can be called not directly from current function (e.g. func -> f -> g -> wait())
+// XXX currently reader_blocks supports only direct and 1-level indirect cases.
+@ reader_blocks_direct @
+identifier stream_reader.readstream;
+identifier wait_event =~ "^wait_event_.*";
+@@
+ readstream(...)
+ {
+ ... when exists
+ wait_event(...)
+ ... when exists
+ }
+
+@ reader_blocks_1 @
+identifier stream_reader.readstream;
+identifier blocks.block_f;
+@@
+ readstream(...)
+ {
+ ... when exists
+ block_f(...)
+ ... when exists
+ }
+
+@ reader_blocks depends on reader_blocks_direct || reader_blocks_1 @
+identifier stream_reader.readstream;
+@@
+ readstream(...) {
+ ...
+ }
+
+
+// file_operations + whether they have _any_ .read, .write, .llseek ... at all.
+//
+// XXX add support for file_operations xxx[N] = ... (sound/core/pcm_native.c)
+@ fops0 @
+identifier fops;
+@@
+ struct file_operations fops = {
+ ...
+ };
+
+@ has_read @
+identifier fops0.fops;
+identifier read_f;
+@@
+ struct file_operations fops = {
+ .read = read_f,
+ };
+
+@ has_read_iter @
+identifier fops0.fops;
+identifier read_iter_f;
+@@
+ struct file_operations fops = {
+ .read_iter = read_iter_f,
+ };
+
+@ has_write @
+identifier fops0.fops;
+identifier write_f;
+@@
+ struct file_operations fops = {
+ .write = write_f,
+ };
+
+@ has_write_iter @
+identifier fops0.fops;
+identifier write_iter_f;
+@@
+ struct file_operations fops = {
+ .write_iter = write_iter_f,
+ };
+
+@ has_llseek @
+identifier fops0.fops;
+identifier llseek_f;
+@@
+ struct file_operations fops = {
+ .llseek = llseek_f,
+ };
+
+@ has_no_llseek @
+identifier fops0.fops;
+@@
+ struct file_operations fops = {
+ .llseek = no_llseek,
+ };
+
+@ has_mmap @
+identifier fops0.fops;
+identifier mmap_f;
+@@
+ struct file_operations fops = {
+ .mmap = mmap_f,
+ };
+
+@ has_copy_file_range @
+identifier fops0.fops;
+identifier copy_file_range_f;
+@@
+ struct file_operations fops = {
+ .copy_file_range = copy_file_range_f,
+ };
+
+@ has_remap_file_range @
+identifier fops0.fops;
+identifier remap_file_range_f;
+@@
+ struct file_operations fops = {
+ .remap_file_range = remap_file_range_f,
+ };
+
+@ has_splice_read @
+identifier fops0.fops;
+identifier splice_read_f;
+@@
+ struct file_operations fops = {
+ .splice_read = splice_read_f,
+ };
+
+@ has_splice_write @
+identifier fops0.fops;
+identifier splice_write_f;
+@@
+ struct file_operations fops = {
+ .splice_write = splice_write_f,
+ };
+
+
+// file_operations that is candidate for stream_open conversion - it does not
+// use mmap and other methods that assume @offset access to file.
+//
+// XXX for simplicity require no .{read/write}_iter and no .splice_{read/write} for now.
+// XXX maybe_steam.fops cannot be used in other rules - it gives "bad rule maybe_stream or bad variable fops".
+@ maybe_stream depends on (!has_llseek || has_no_llseek) && !has_mmap && !has_copy_file_range && !has_remap_file_range && !has_read_iter && !has_write_iter && !has_splice_read && !has_splice_write @
+identifier fops0.fops;
+@@
+ struct file_operations fops = {
+ };
+
+
+// ---- conversions ----
+
+// XXX .open = nonseekable_open -> .open = stream_open
+// XXX .open = func -> openfunc -> nonseekable_open
+
+// read & write
+//
+// if both are used in the same file_operations together with an opener -
+// under that conditions we can use stream_open instead of nonseekable_open.
+@ fops_rw depends on maybe_stream @
+identifier fops0.fops, openfunc;
+identifier stream_reader.readstream;
+identifier stream_writer.writestream;
+@@
+ struct file_operations fops = {
+ .open = openfunc,
+ .read = readstream,
+ .write = writestream,
+ };
+
+@ report_rw depends on report @
+identifier fops_rw.openfunc;
+position p1;
+@@
+ openfunc(...) {
+ <...
+ nonseekable_open@p1
+ ...>
+ }
+
+@ script:python depends on report && reader_blocks @
+fops << fops0.fops;
+p << report_rw.p1;
+@@
+coccilib.report.print_report(p[0],
+ "ERROR: %s: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix." % (fops,))
+
+@ script:python depends on report && !reader_blocks @
+fops << fops0.fops;
+p << report_rw.p1;
+@@
+coccilib.report.print_report(p[0],
+ "WARNING: %s: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+
+@ explain_rw_deadlocked depends on explain && reader_blocks @
+identifier fops_rw.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ nonseekable_open /* read & write (was deadlock) */
+ ...>
+ }
+
+
+@ explain_rw_nodeadlock depends on explain && !reader_blocks @
+identifier fops_rw.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ nonseekable_open /* read & write (no direct deadlock) */
+ ...>
+ }
+
+@ patch_rw depends on patch @
+identifier fops_rw.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ stream_open
+ ...>
+ }
+
+
+// read, but not write
+@ fops_r depends on maybe_stream && !has_write @
+identifier fops0.fops, openfunc;
+identifier stream_reader.readstream;
+@@
+ struct file_operations fops = {
+ .open = openfunc,
+ .read = readstream,
+ };
+
+@ report_r depends on report @
+identifier fops_r.openfunc;
+position p1;
+@@
+ openfunc(...) {
+ <...
+ nonseekable_open@p1
+ ...>
+ }
+
+@ script:python depends on report @
+fops << fops0.fops;
+p << report_r.p1;
+@@
+coccilib.report.print_report(p[0],
+ "WARNING: %s: .read() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+@ explain_r depends on explain @
+identifier fops_r.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ nonseekable_open /* read only */
+ ...>
+ }
+
+@ patch_r depends on patch @
+identifier fops_r.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ stream_open
+ ...>
+ }
+
+
+// write, but not read
+@ fops_w depends on maybe_stream && !has_read @
+identifier fops0.fops, openfunc;
+identifier stream_writer.writestream;
+@@
+ struct file_operations fops = {
+ .open = openfunc,
+ .write = writestream,
+ };
+
+@ report_w depends on report @
+identifier fops_w.openfunc;
+position p1;
+@@
+ openfunc(...) {
+ <...
+ nonseekable_open@p1
+ ...>
+ }
+
+@ script:python depends on report @
+fops << fops0.fops;
+p << report_w.p1;
+@@
+coccilib.report.print_report(p[0],
+ "WARNING: %s: .write() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+@ explain_w depends on explain @
+identifier fops_w.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ nonseekable_open /* write only */
+ ...>
+ }
+
+@ patch_w depends on patch @
+identifier fops_w.openfunc;
+@@
+ openfunc(...) {
+ <...
+- nonseekable_open
++ stream_open
+ ...>
+ }
+
+
+// no read, no write - don't change anything
--
2.20.1
[ Upstream commit 298a32b132087550d3fa80641ca58323c5dfd4d9 ]
Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.
kernel_init
kvm_guest_init
kvm_free_tmp
free_reserved_area
free_unref_page
free_unref_page_prepare
With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.
This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Reported-by: Qian Cai <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Tested-by: Qian Cai <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Radim Krcmar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/powerpc/kernel/kvm.c | 7 +++++++
mm/kmemleak.c | 16 +++++++++++-----
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 683b5b3805bd..cd381e2291df 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -22,6 +22,7 @@
#include <linux/kvm_host.h>
#include <linux/init.h>
#include <linux/export.h>
+#include <linux/kmemleak.h>
#include <linux/kvm_para.h>
#include <linux/slab.h>
#include <linux/of.h>
@@ -712,6 +713,12 @@ static void kvm_use_magic_page(void)
static __init void kvm_free_tmp(void)
{
+ /*
+ * Inform kmemleak about the hole in the .bss section since the
+ * corresponding pages will be unmapped with DEBUG_PAGEALLOC=y.
+ */
+ kmemleak_free_part(&kvm_tmp[kvm_tmp_index],
+ ARRAY_SIZE(kvm_tmp) - kvm_tmp_index);
free_reserved_area(&kvm_tmp[kvm_tmp_index],
&kvm_tmp[ARRAY_SIZE(kvm_tmp)], -1, NULL);
}
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 707fa5579f66..6c318f5ac234 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1529,11 +1529,6 @@ static void kmemleak_scan(void)
}
rcu_read_unlock();
- /* data/bss scanning */
- scan_large_block(_sdata, _edata);
- scan_large_block(__bss_start, __bss_stop);
- scan_large_block(__start_ro_after_init, __end_ro_after_init);
-
#ifdef CONFIG_SMP
/* per-cpu sections scanning */
for_each_possible_cpu(i)
@@ -2071,6 +2066,17 @@ void __init kmemleak_init(void)
}
local_irq_restore(flags);
+ /* register the data/bss sections */
+ create_object((unsigned long)_sdata, _edata - _sdata,
+ KMEMLEAK_GREY, GFP_ATOMIC);
+ create_object((unsigned long)__bss_start, __bss_stop - __bss_start,
+ KMEMLEAK_GREY, GFP_ATOMIC);
+ /* only register .data..ro_after_init if not within .data */
+ if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
+ create_object((unsigned long)__start_ro_after_init,
+ __end_ro_after_init - __start_ro_after_init,
+ KMEMLEAK_GREY, GFP_ATOMIC);
+
/*
* This is the point where tracking allocations is safe. Automatic
* scanning is started during the late initcall. Add the early logged
--
2.20.1
From: Sean Christopherson <[email protected]>
commit f3689e3f17f064fd4cd5f0cb01ae2395c94f39d9 upstream.
RSI is clobbered by the vCPU-run asm blob, but it's not marked as such,
probably because GCC doesn't let you mark inputs as clobbered. "Save"
RSI to a dummy output so that GCC recognizes it as being clobbered.
Fixes: 773e8a0425c9 ("x86/kvm: use Enlightened VMCS when running on Hyper-V")
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6465,7 +6465,7 @@ static void __vmx_vcpu_run(struct kvm_vc
"xor %%edi, %%edi \n\t"
"xor %%ebp, %%ebp \n\t"
"pop %%" _ASM_BP "; pop %%" _ASM_DX " \n\t"
- : ASM_CALL_CONSTRAINT
+ : ASM_CALL_CONSTRAINT, "=S"((int){0})
: "c"(vmx), "d"((unsigned long)HOST_RSP), "S"(evmcs_rsp),
[launched]"i"(offsetof(struct vcpu_vmx, __launched)),
[fail]"i"(offsetof(struct vcpu_vmx, fail)),
From: Ondrej Mosnacek <[email protected]>
commit a83d6ddaebe541570291205cb538e35ad4ff94f9 upstream.
In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling
files/directories, so we should never set the SBLABEL_MNT flag. The
'special handling' in selinux_is_sblabel_mnt() is only intended for when
the behavior is set to SECURITY_FS_USE_GENFS.
While there, make the logic in selinux_is_sblabel_mnt() more explicit
and add a BUILD_BUG_ON() to make sure that introducing a new
SECURITY_FS_USE_* forces a review of the logic.
Fixes: d5f3a5f6e7e7 ("selinux: add security in-core xattr support for pstore and debugfs")
Signed-off-by: Ondrej Mosnacek <[email protected]>
Reviewed-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -534,16 +534,10 @@ static int may_context_mount_inode_relab
return rc;
}
-static int selinux_is_sblabel_mnt(struct super_block *sb)
+static int selinux_is_genfs_special_handling(struct super_block *sb)
{
- struct superblock_security_struct *sbsec = sb->s_security;
-
- return sbsec->behavior == SECURITY_FS_USE_XATTR ||
- sbsec->behavior == SECURITY_FS_USE_TRANS ||
- sbsec->behavior == SECURITY_FS_USE_TASK ||
- sbsec->behavior == SECURITY_FS_USE_NATIVE ||
- /* Special handling. Genfs but also in-core setxattr handler */
- !strcmp(sb->s_type->name, "sysfs") ||
+ /* Special handling. Genfs but also in-core setxattr handler */
+ return !strcmp(sb->s_type->name, "sysfs") ||
!strcmp(sb->s_type->name, "pstore") ||
!strcmp(sb->s_type->name, "debugfs") ||
!strcmp(sb->s_type->name, "tracefs") ||
@@ -553,6 +547,34 @@ static int selinux_is_sblabel_mnt(struct
!strcmp(sb->s_type->name, "cgroup2")));
}
+static int selinux_is_sblabel_mnt(struct super_block *sb)
+{
+ struct superblock_security_struct *sbsec = sb->s_security;
+
+ /*
+ * IMPORTANT: Double-check logic in this function when adding a new
+ * SECURITY_FS_USE_* definition!
+ */
+ BUILD_BUG_ON(SECURITY_FS_USE_MAX != 7);
+
+ switch (sbsec->behavior) {
+ case SECURITY_FS_USE_XATTR:
+ case SECURITY_FS_USE_TRANS:
+ case SECURITY_FS_USE_TASK:
+ case SECURITY_FS_USE_NATIVE:
+ return 1;
+
+ case SECURITY_FS_USE_GENFS:
+ return selinux_is_genfs_special_handling(sb);
+
+ /* Never allow relabeling on context mounts */
+ case SECURITY_FS_USE_MNTPOINT:
+ case SECURITY_FS_USE_NONE:
+ default:
+ return 0;
+ }
+}
+
static int sb_finish_set_opts(struct super_block *sb)
{
struct superblock_security_struct *sbsec = sb->s_security;
From: Baoquan He <[email protected]>
commit ec3937107ab43f3e8b2bc9dad95710043c462ff7 upstream.
kernel_randomize_memory() uses __PHYSICAL_MASK_SHIFT to calculate
the maximum amount of system RAM supported. The size of the direct
mapping section is obtained from the smaller one of the below two
values:
(actual system RAM size + padding size) vs (max system RAM size supported)
This calculation is wrong since commit
b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52").
In it, __PHYSICAL_MASK_SHIFT was changed to be 52, regardless of whether
the kernel is using 4-level or 5-level page tables. Thus, it will always
use 4 PB as the maximum amount of system RAM, even in 4-level paging
mode where it should actually be 64 TB.
Thus, the size of the direct mapping section will always
be the sum of the actual system RAM size plus the padding size.
Even when the amount of system RAM is 64 TB, the following layout will
still be used. Obviously KALSR will be weakened significantly.
|____|_______actual RAM_______|_padding_|______the rest_______|
0 64TB ~120TB
Instead, it should be like this:
|____|_______actual RAM_______|_________the rest______________|
0 64TB ~120TB
The size of padding region is controlled by
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING, which is 10 TB by default.
The above issue only exists when
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING is set to a non-zero value,
which is the case when CONFIG_MEMORY_HOTPLUG is enabled. Otherwise,
using __PHYSICAL_MASK_SHIFT doesn't affect KASLR.
Fix it by replacing __PHYSICAL_MASK_SHIFT with MAX_PHYSMEM_BITS.
[ bp: Massage commit message. ]
Fixes: b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52")
Signed-off-by: Baoquan He <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Thomas Garnier <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: x86-ml <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/20190417083536.GE7065@MiWiFi-R3L-srv
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/kaslr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/mm/kaslr.c
+++ b/arch/x86/mm/kaslr.c
@@ -94,7 +94,7 @@ void __init kernel_randomize_memory(void
if (!kaslr_memory_enabled())
return;
- kaslr_regions[0].size_tb = 1 << (__PHYSICAL_MASK_SHIFT - TB_SHIFT);
+ kaslr_regions[0].size_tb = 1 << (MAX_PHYSMEM_BITS - TB_SHIFT);
kaslr_regions[1].size_tb = VMALLOC_SIZE_TB;
/*
From: David Müller <[email protected]>
commit 7c2e07130090ae001a97a6b65597830d6815e93e upstream.
Since commit 648e921888ad ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are
unconditionally gated off. Unfortunately this will break systems where these
clocks are used for external purposes beyond the kernel's knowledge. Fix it
by implementing a system specific quirk to mark the necessary pmc_plt_clks as
critical.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: David Müller <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/x86/clk-pmc-atom.c | 14 +++++++++++---
drivers/platform/x86/pmc_atom.c | 21 +++++++++++++++++++++
include/linux/platform_data/x86/clk-pmc-atom.h | 3 +++
3 files changed, 35 insertions(+), 3 deletions(-)
--- a/drivers/clk/x86/clk-pmc-atom.c
+++ b/drivers/clk/x86/clk-pmc-atom.c
@@ -165,7 +165,7 @@ static const struct clk_ops plt_clk_ops
};
static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id,
- void __iomem *base,
+ const struct pmc_clk_data *pmc_data,
const char **parent_names,
int num_parents)
{
@@ -184,9 +184,17 @@ static struct clk_plt *plt_clk_register(
init.num_parents = num_parents;
pclk->hw.init = &init;
- pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
+ pclk->reg = pmc_data->base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
spin_lock_init(&pclk->lock);
+ /*
+ * On some systems, the pmc_plt_clocks already enabled by the
+ * firmware are being marked as critical to avoid them being
+ * gated by the clock framework.
+ */
+ if (pmc_data->critical && plt_clk_is_enabled(&pclk->hw))
+ init.flags |= CLK_IS_CRITICAL;
+
ret = devm_clk_hw_register(&pdev->dev, &pclk->hw);
if (ret) {
pclk = ERR_PTR(ret);
@@ -332,7 +340,7 @@ static int plt_clk_probe(struct platform
return PTR_ERR(parent_names);
for (i = 0; i < PMC_CLK_NUM; i++) {
- data->clks[i] = plt_clk_register(pdev, i, pmc_data->base,
+ data->clks[i] = plt_clk_register(pdev, i, pmc_data,
parent_names, data->nparents);
if (IS_ERR(data->clks[i])) {
err = PTR_ERR(data->clks[i]);
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -17,6 +17,7 @@
#include <linux/debugfs.h>
#include <linux/device.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_data/x86/clk-pmc-atom.h>
@@ -391,11 +392,27 @@ static int pmc_dbgfs_register(struct pmc
}
#endif /* CONFIG_DEBUG_FS */
+/*
+ * Some systems need one or more of their pmc_plt_clks to be
+ * marked as critical.
+ */
+static const struct dmi_system_id critclk_systems[] __initconst = {
+ {
+ .ident = "MPL CEC1x",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CEC10 Family"),
+ },
+ },
+ { /*sentinel*/ }
+};
+
static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap,
const struct pmc_data *pmc_data)
{
struct platform_device *clkdev;
struct pmc_clk_data *clk_data;
+ const struct dmi_system_id *d = dmi_first_match(critclk_systems);
clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
@@ -403,6 +420,10 @@ static int pmc_setup_clks(struct pci_dev
clk_data->base = pmc_regmap; /* offset is added by client */
clk_data->clks = pmc_data->clks;
+ if (d) {
+ clk_data->critical = true;
+ pr_info("%s critclks quirk enabled\n", d->ident);
+ }
clkdev = platform_device_register_data(&pdev->dev, "clk-pmc-atom",
PLATFORM_DEVID_NONE,
--- a/include/linux/platform_data/x86/clk-pmc-atom.h
+++ b/include/linux/platform_data/x86/clk-pmc-atom.h
@@ -35,10 +35,13 @@ struct pmc_clk {
*
* @base: PMC clock register base offset
* @clks: pointer to set of registered clocks, typically 0..5
+ * @critical: flag to indicate if firmware enabled pmc_plt_clks
+ * should be marked as critial or not
*/
struct pmc_clk_data {
void __iomem *base;
const struct pmc_clk *clks;
+ bool critical;
};
#endif /* __PLATFORM_DATA_X86_CLK_PMC_ATOM_H */
From: Qian Cai <[email protected]>
commit 0d02113b31b2017dd349ec9df2314e798a90fa6e upstream.
The first kmemleak_scan() call after boot would trigger the crash below
because this callpath:
kernel_init
free_initmem
mem_encrypt_free_decrypted_mem
free_init_pages
unmaps memory inside the .bss when DEBUG_PAGEALLOC=y.
kmemleak_init() will register the .data/.bss sections and then
kmemleak_scan() will scan those addresses and dereference them looking
for pointer references. If free_init_pages() frees and unmaps pages in
those sections, kmemleak_scan() will crash if referencing one of those
addresses:
BUG: unable to handle kernel paging request at ffffffffbd402000
CPU: 12 PID: 325 Comm: kmemleak Not tainted 5.1.0-rc4+ #4
RIP: 0010:scan_block
Call Trace:
scan_gray_list
kmemleak_scan
kmemleak_scan_thread
kthread
ret_from_fork
Since kmemleak_free_part() is tolerant to unknown objects (not tracked
by kmemleak), it is fine to call it from free_init_pages() even if not
all address ranges passed to this function are known to kmemleak.
[ bp: Massage. ]
Fixes: b3f0907c71e0 ("x86/mm: Add .bss..decrypted section to hold shared variables")
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/init.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -5,6 +5,7 @@
#include <linux/memblock.h>
#include <linux/swapfile.h>
#include <linux/swapops.h>
+#include <linux/kmemleak.h>
#include <asm/set_memory.h>
#include <asm/e820/api.h>
@@ -766,6 +767,11 @@ void free_init_pages(const char *what, u
if (debug_pagealloc_enabled()) {
pr_info("debug: unmapping init [mem %#010lx-%#010lx]\n",
begin, end - 1);
+ /*
+ * Inform kmemleak about the hole in the memory since the
+ * corresponding pages will be unmapped.
+ */
+ kmemleak_free_part((void *)begin, end - begin);
set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
} else {
/*
From: Yu Zhang <[email protected]>
commit d92935979adba274b1099e67b7f713f6d8413121 upstream.
Previously, 'commit f99e3daf94ff ("KVM: x86: Add Intel PT
virtualization work mode")' work mode' offered framework
to support Intel PT virtualization. However, the patch has
some typos in vmx_vmentry_ctrl() and vmx_vmexit_ctrl(), e.g.
used wrong flags and wrong variable, which will cause the
VM entry failure later.
Fixes: 'commit f99e3daf94ff ("KVM: x86: Add Intel PT virtualization work mode")'
Signed-off-by: Yu Zhang <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/vmx.h | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -444,7 +444,8 @@ static inline u32 vmx_vmentry_ctrl(void)
{
u32 vmentry_ctrl = vmcs_config.vmentry_ctrl;
if (pt_mode == PT_MODE_SYSTEM)
- vmentry_ctrl &= ~(VM_EXIT_PT_CONCEAL_PIP | VM_EXIT_CLEAR_IA32_RTIT_CTL);
+ vmentry_ctrl &= ~(VM_ENTRY_PT_CONCEAL_PIP |
+ VM_ENTRY_LOAD_IA32_RTIT_CTL);
/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
return vmentry_ctrl &
~(VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | VM_ENTRY_LOAD_IA32_EFER);
@@ -454,9 +455,10 @@ static inline u32 vmx_vmexit_ctrl(void)
{
u32 vmexit_ctrl = vmcs_config.vmexit_ctrl;
if (pt_mode == PT_MODE_SYSTEM)
- vmexit_ctrl &= ~(VM_ENTRY_PT_CONCEAL_PIP | VM_ENTRY_LOAD_IA32_RTIT_CTL);
+ vmexit_ctrl &= ~(VM_EXIT_PT_CONCEAL_PIP |
+ VM_EXIT_CLEAR_IA32_RTIT_CTL);
/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
- return vmcs_config.vmexit_ctrl &
+ return vmexit_ctrl &
~(VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | VM_EXIT_LOAD_IA32_EFER);
}
From: Rajneesh Bhardwaj <[email protected]>
commit d6827015e671cd17871c9b7a0fabe06c044f7470 upstream.
For Cannonlake and Icelake, the IP name for Res_6 should be SPF i.e.
South Port F. No functional change is intended other than just renaming
the IP appropriately.
Cc: "David E. Box" <[email protected]>
Cc: Srinivas Pandruvada <[email protected]>
Fixes: 291101f6a735 ("platform/x86: intel_pmc_core: Add CannonLake PCH support")
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/intel_pmc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -205,7 +205,7 @@ static const struct pmc_bit_map cnp_pfea
{"CNVI", BIT(3)},
{"UFS0", BIT(4)},
{"EMMC", BIT(5)},
- {"Res_6", BIT(6)},
+ {"SPF", BIT(6)},
{"SBR6", BIT(7)},
{"SBR7", BIT(0)},
From: Daniel Jurgens <[email protected]>
commit 6e88e672b69f0e627acdae74a527b730ea224b6b upstream.
If the MAD agents isn't allowed to manage the subnet, or fails to register
for the LSM notifier, the security context is leaked. Free the context in
these cases.
Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Reported-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/security.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/core/security.c
+++ b/drivers/infiniband/core/security.c
@@ -710,16 +710,20 @@ int ib_mad_agent_security_setup(struct i
dev_name(&agent->device->dev),
agent->port_num);
if (ret)
- return ret;
+ goto free_security;
agent->lsm_nb.notifier_call = ib_mad_agent_security_change;
ret = register_lsm_notifier(&agent->lsm_nb);
if (ret)
- return ret;
+ goto free_security;
agent->smp_allowed = true;
agent->lsm_nb_reg = true;
return 0;
+
+free_security:
+ security_ib_free_security(agent->security);
+ return ret;
}
void ib_mad_agent_security_cleanup(struct ib_mad_agent *agent)
From: Arnaud Pouliquen <[email protected]>
commit 17d3069ccf06970e2db3f7cbf4335f207524279e upstream.
This patch fixes the sai driver structure overwriting which results in
a cpu dai name equal NULL.
Fixes: 3e086ed ("ASoC: stm32: add SAI driver")
Signed-off-by: Arnaud Pouliquen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/stm/stm32_sai_sub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1394,7 +1394,6 @@ static int stm32_sai_sub_dais_init(struc
if (!sai->cpu_dai_drv)
return -ENOMEM;
- sai->cpu_dai_drv->name = dev_name(&pdev->dev);
if (STM_SAI_IS_PLAYBACK(sai)) {
memcpy(sai->cpu_dai_drv, &stm32_sai_playback_dai,
sizeof(stm32_sai_playback_dai));
@@ -1404,6 +1403,7 @@ static int stm32_sai_sub_dais_init(struc
sizeof(stm32_sai_capture_dai));
sai->cpu_dai_drv->capture.stream_name = sai->cpu_dai_drv->name;
}
+ sai->cpu_dai_drv->name = dev_name(&pdev->dev);
return 0;
}
From: Rajneesh Bhardwaj <[email protected]>
commit e50af8332785355de3cb40d9f5e8c45dbfc86f53 upstream.
Only Coffeelake should use Cannonlake regmap other than Cannonlake
platform. This allows Coffeelake special handling only when there is no
matching PCI device and default reg map selected as per CPUID is for
Sunrisepoint PCH. This change is needed to enable support for newer SoCs
such as Icelake.
Cc: "David E. Box" <[email protected]>
Cc: Srinivas Pandruvada <[email protected]>
Fixes: 661405bd817b ("platform/x86: intel_pmc_core: Special case for Coffeelake")
Acked-by: "David E. Box" <[email protected]>
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/intel_pmc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -802,7 +802,7 @@ static int __init pmc_core_probe(void)
* Sunrisepoint PCH regmap can't be used. Use Cannonlake PCH regmap
* in this case.
*/
- if (!pci_dev_present(pmc_pci_ids))
+ if (pmcdev->map == &spt_reg_map && !pci_dev_present(pmc_pci_ids))
pmcdev->map = &cnp_reg_map;
if (lpit_read_residency_count_address(&slp_s0_addr))
From: Daniel Jurgens <[email protected]>
commit d60667fc398ed34b3c7456b020481c55c760e503 upstream.
If the notifier runs after the security context is freed an access of
freed memory can occur.
Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/security.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/core/security.c
+++ b/drivers/infiniband/core/security.c
@@ -727,9 +727,10 @@ void ib_mad_agent_security_cleanup(struc
if (!rdma_protocol_ib(agent->device, agent->port_num))
return;
- security_ib_free_security(agent->security);
if (agent->lsm_nb_reg)
unregister_lsm_notifier(&agent->lsm_nb);
+
+ security_ib_free_security(agent->security);
}
int ib_mad_enforce_security(struct ib_mad_agent_private *map, u16 pkey_index)
From: Nicolas Le Bayon <[email protected]>
commit c86da50cfd840edf223a242580913692acddbcf6 upstream.
It conforms with Reference Manual I2C timing section.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Nicolas Le Bayon <[email protected]>
Signed-off-by: Bich Hemon <[email protected]>
Reviewed-by: Pierre-Yves MORDRET <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-stm32f7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -432,7 +432,7 @@ static int stm32f7_i2c_compute_timing(st
STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
dnf_delay = setup->dnf * i2cclk;
- sdadel_min = setup->fall_time - i2c_specs[setup->speed].hddat_min -
+ sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time -
af_delay_min - (setup->dnf + 3) * i2cclk;
sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time -
From: Tony Luck <[email protected]>
commit 41f035a86b5b72a4f947c38e94239d20d595352a upstream.
In
c7d606f560e4 ("x86/mce: Improve error message when kernel cannot recover")
a case was added for a machine check caused by a DATA access to poison
memory from the kernel. A case should have been added also for an
uncorrectable error during an instruction fetch in the kernel.
Add that extra case so the error message now reads:
mce: [Hardware Error]: Machine check: Instruction fetch error in kernel
Fixes: c7d606f560e4 ("x86/mce: Improve error message when kernel cannot recover")
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Pu Wen <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mce/severity.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/x86/kernel/cpu/mce/severity.c
+++ b/arch/x86/kernel/cpu/mce/severity.c
@@ -165,6 +165,11 @@ static struct severity {
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
KERNEL
),
+ MCESEV(
+ PANIC, "Instruction fetch error in kernel",
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
+ KERNEL
+ ),
#endif
MCESEV(
PANIC, "Action required: unknown MCACOD",
From: Sean Christopherson <[email protected]>
commit b904cb8dff824b79233e82c078837627ebd52717 upstream.
...to avoid dereferencing a null pointer when querying the per-vCPU
timer advance.
Fixes: 39497d7660d98 ("KVM: lapic: Track lapic timer advance per vCPU")
Reported-by: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 3 ---
arch/x86/kvm/x86.c | 3 ++-
2 files changed, 2 insertions(+), 4 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1504,9 +1504,6 @@ void wait_lapic_expire(struct kvm_vcpu *
u32 timer_advance_ns = apic->lapic_timer.timer_advance_ns;
u64 guest_tsc, tsc_deadline, ns;
- if (!lapic_in_kernel(vcpu))
- return;
-
if (apic->lapic_timer.expired_tscdeadline == 0)
return;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7886,7 +7886,8 @@ static int vcpu_enter_guest(struct kvm_v
}
trace_kvm_entry(vcpu->vcpu_id);
- if (vcpu->arch.apic->lapic_timer.timer_advance_ns)
+ if (lapic_in_kernel(vcpu) &&
+ vcpu->arch.apic->lapic_timer.timer_advance_ns)
wait_lapic_expire(vcpu);
guest_enter_irqoff();
From: Aneesh Kumar K.V <[email protected]>
commit 3b4d07d2674f6b4a9281031f99d1f7efd325b16d upstream.
When doing top-down search the low_limit is not PAGE_SIZE but rather
max(PAGE_SIZE, mmap_min_addr). This handle cases in which mmap_min_addr >
PAGE_SIZE.
Fixes: fba2369e6ceb ("mm: use vm_unmapped_area() on powerpc architecture")
Reviewed-by: Laurent Dufour <[email protected]>
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/slice.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -32,6 +32,7 @@
#include <linux/export.h>
#include <linux/hugetlb.h>
#include <linux/sched/mm.h>
+#include <linux/security.h>
#include <asm/mman.h>
#include <asm/mmu.h>
#include <asm/copro.h>
@@ -377,6 +378,7 @@ static unsigned long slice_find_area_top
int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
unsigned long addr, found, prev;
struct vm_unmapped_area_info info;
+ unsigned long min_addr = max(PAGE_SIZE, mmap_min_addr);
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
@@ -393,7 +395,7 @@ static unsigned long slice_find_area_top
if (high_limit > DEFAULT_MAP_WINDOW)
addr += mm->context.slb_addr_limit - DEFAULT_MAP_WINDOW;
- while (addr > PAGE_SIZE) {
+ while (addr > min_addr) {
info.high_limit = addr;
if (!slice_scan_available(addr - 1, available, 0, &addr))
continue;
@@ -405,8 +407,8 @@ static unsigned long slice_find_area_top
* Check if we need to reduce the range, or if we can
* extend it to cover the previous available slice.
*/
- if (addr < PAGE_SIZE)
- addr = PAGE_SIZE;
+ if (addr < min_addr)
+ addr = min_addr;
else if (slice_scan_available(addr - 1, available, 0, &prev)) {
addr = prev;
goto prev_slice;
@@ -528,7 +530,7 @@ unsigned long slice_get_unmapped_area(un
addr = _ALIGN_UP(addr, page_size);
slice_dbg(" aligned addr=%lx\n", addr);
/* Ignore hint if it's too large or overlaps a VMA */
- if (addr > high_limit - len ||
+ if (addr > high_limit - len || addr < mmap_min_addr ||
!slice_area_is_free(mm, addr, len))
addr = 0;
}
From: Anson Huang <[email protected]>
commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 upstream.
SNVS IRQ is requested before necessary driver data initialized,
if there is a pending IRQ during driver probe phase, kernel
NULL pointer panic will occur in IRQ handler. To avoid such
scenario, just initialize necessary driver data before enabling
IRQ. This patch is inspired by NXP's internal kernel tree.
Fixes: d3dc6e232215 ("input: keyboard: imx: add snvs power key driver")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/keyboard/snvs_pwrkey.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -148,6 +148,9 @@ static int imx_snvs_pwrkey_probe(struct
return error;
}
+ pdata->input = input;
+ platform_set_drvdata(pdev, pdata);
+
error = devm_request_irq(&pdev->dev, pdata->irq,
imx_snvs_pwrkey_interrupt,
0, pdev->name, pdev);
@@ -163,9 +166,6 @@ static int imx_snvs_pwrkey_probe(struct
return error;
}
- pdata->input = input;
- platform_set_drvdata(pdev, pdata);
-
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
From: Stephen Smalley <[email protected]>
commit 3a28cff3bd4bf43f02be0c4e7933aebf3dc8197e upstream.
commit 0dc1ba24f7fff6 ("SELINUX: Make selinux cache VFS RCU walks safe")
results in no audit messages at all if in permissive mode because the
cache is updated during the rcu walk and thus no denial occurs on
the subsequent ref walk. Fix this by not updating the cache when
performing a non-blocking permission check. This only affects search
and symlink read checks during rcu walk.
Fixes: 0dc1ba24f7fff6 ("SELINUX: Make selinux cache VFS RCU walks safe")
Reported-by: BMK <[email protected]>
Signed-off-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/avc.c | 23 +++++++++++++++++++++--
security/selinux/hooks.c | 4 +++-
security/selinux/include/avc.h | 1 +
3 files changed, 25 insertions(+), 3 deletions(-)
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -838,6 +838,7 @@ out:
* @ssid,@tsid,@tclass : identifier of an AVC entry
* @seqno : sequence number when decision was made
* @xpd: extended_perms_decision to be added to the node
+ * @flags: the AVC_* flags, e.g. AVC_NONBLOCKING, AVC_EXTENDED_PERMS, or 0.
*
* if a valid AVC entry doesn't exist,this function returns -ENOENT.
* if kmalloc() called internal returns NULL, this function returns -ENOMEM.
@@ -856,6 +857,23 @@ static int avc_update_node(struct selinu
struct hlist_head *head;
spinlock_t *lock;
+ /*
+ * If we are in a non-blocking code path, e.g. VFS RCU walk,
+ * then we must not add permissions to a cache entry
+ * because we cannot safely audit the denial. Otherwise,
+ * during the subsequent blocking retry (e.g. VFS ref walk), we
+ * will find the permissions already granted in the cache entry
+ * and won't audit anything at all, leading to silent denials in
+ * permissive mode that only appear when in enforcing mode.
+ *
+ * See the corresponding handling in slow_avc_audit(), and the
+ * logic in selinux_inode_follow_link and selinux_inode_permission
+ * for the VFS MAY_NOT_BLOCK flag, which is transliterated into
+ * AVC_NONBLOCKING for avc_has_perm_noaudit().
+ */
+ if (flags & AVC_NONBLOCKING)
+ return 0;
+
node = avc_alloc_node(avc);
if (!node) {
rc = -ENOMEM;
@@ -1115,7 +1133,7 @@ decision:
* @tsid: target security identifier
* @tclass: target security class
* @requested: requested permissions, interpreted based on @tclass
- * @flags: AVC_STRICT or 0
+ * @flags: AVC_STRICT, AVC_NONBLOCKING, or 0
* @avd: access vector decisions
*
* Check the AVC to determine whether the @requested permissions are granted
@@ -1199,7 +1217,8 @@ int avc_has_perm_flags(struct selinux_st
struct av_decision avd;
int rc, rc2;
- rc = avc_has_perm_noaudit(state, ssid, tsid, tclass, requested, 0,
+ rc = avc_has_perm_noaudit(state, ssid, tsid, tclass, requested,
+ (flags & MAY_NOT_BLOCK) ? AVC_NONBLOCKING : 0,
&avd);
rc2 = avc_audit(state, ssid, tsid, tclass, requested, &avd, rc,
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2985,7 +2985,9 @@ static int selinux_inode_permission(stru
return PTR_ERR(isec);
rc = avc_has_perm_noaudit(&selinux_state,
- sid, isec->sid, isec->sclass, perms, 0, &avd);
+ sid, isec->sid, isec->sclass, perms,
+ (flags & MAY_NOT_BLOCK) ? AVC_NONBLOCKING : 0,
+ &avd);
audited = avc_audit_required(perms, &avd, rc,
from_access ? FILE__AUDIT_ACCESS : 0,
&denied);
--- a/security/selinux/include/avc.h
+++ b/security/selinux/include/avc.h
@@ -142,6 +142,7 @@ static inline int avc_audit(struct selin
#define AVC_STRICT 1 /* Ignore permissive mode. */
#define AVC_EXTENDED_PERMS 2 /* update extended permissions */
+#define AVC_NONBLOCKING 4 /* non blocking */
int avc_has_perm_noaudit(struct selinux_state *state,
u32 ssid, u32 tsid,
u16 tclass, u32 requested,
[ Upstream commit 7ff684a683d777c4956fce93e60accbab2bd7696 ]
At module load, if the selected home_node value is greater than
the available numa nodes, the system will crash in
__alloc_pages_nodemask() due to a bad paging request. Prevent this
user error crash by detecting the bad value, logging an error, and
setting g_home_node back to the default of NUMA_NO_NODE.
Signed-off-by: John Pittman <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/block/null_blk_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 62c9654b9ce8..fd7a9be54595 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1749,6 +1749,11 @@ static int __init null_init(void)
return -EINVAL;
}
+ if (g_home_node != NUMA_NO_NODE && g_home_node >= nr_online_nodes) {
+ pr_err("null_blk: invalid home_node value\n");
+ g_home_node = NUMA_NO_NODE;
+ }
+
if (g_queue_mode == NULL_Q_RQ) {
pr_err("null_blk: legacy IO path no longer available\n");
return -EINVAL;
--
2.20.1
From: Chen-Yu Tsai <[email protected]>
commit 5fd812e6f5ae0376134234ceb70e8de541ccb10d upstream.
The A64 datasheet lists the supply rail for the headphone amp's charge
pump as "CPVDD". cpvdd-supply is the name of the property for this power
rail specified in the device tree bindings. "HPVCC" was the name used in
the A33 datasheet for the same function.
Rename the supply so it matches the datasheet, bindings, and the subject
from the original commit.
Fixes: ca0412a05756 ("ASoC: sunxi: sun50i-codec-analog: Add support for cpvdd regulator supply")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sunxi/sun50i-codec-analog.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/sunxi/sun50i-codec-analog.c
+++ b/sound/soc/sunxi/sun50i-codec-analog.c
@@ -274,7 +274,7 @@ static const struct snd_soc_dapm_widget
* stream widgets at the card level.
*/
- SND_SOC_DAPM_REGULATOR_SUPPLY("hpvcc", 0, 0),
+ SND_SOC_DAPM_REGULATOR_SUPPLY("cpvdd", 0, 0),
SND_SOC_DAPM_MUX("Headphone Source Playback Route",
SND_SOC_NOPM, 0, 0, sun50i_codec_hp_src),
SND_SOC_DAPM_OUT_DRV("Headphone Amp", SUN50I_ADDA_HP_CTRL,
@@ -362,7 +362,7 @@ static const struct snd_soc_dapm_route s
{ "Headphone Source Playback Route", "Mixer", "Left Mixer" },
{ "Headphone Source Playback Route", "Mixer", "Right Mixer" },
{ "Headphone Amp", NULL, "Headphone Source Playback Route" },
- { "Headphone Amp", NULL, "hpvcc" },
+ { "Headphone Amp", NULL, "cpvdd" },
{ "HP", NULL, "Headphone Amp" },
/* Microphone Routes */
From: Charles Keepax <[email protected]>
commit 639e5eb3c7d67e407f2a71fccd95323751398f6f upstream.
Previously support was added to allow streams to be stopped and
started again without the DSP being power cycled and this was done
by clearing the buffer state in trigger start. Another supported
use-case is using the DSP for a trigger event then opening the
compressed stream later to receive the audio, unfortunately clearing
the buffer state in trigger start destroys the data received
from such a trigger. Correct this issue by moving the call to
wm_adsp_buffer_clear to be in trigger stop instead.
Fixes: 61fc060c40e6 ("ASoC: wm_adsp: Support streams which can start/stop with DSP active")
Signed-off-by: Charles Keepax <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/wm_adsp.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -3443,8 +3443,6 @@ int wm_adsp_compr_trigger(struct snd_com
}
}
- wm_adsp_buffer_clear(compr->buf);
-
/* Trigger the IRQ at one fragment of data */
ret = wm_adsp_buffer_write(compr->buf,
HOST_BUFFER_FIELD(high_water_mark),
@@ -3456,6 +3454,7 @@ int wm_adsp_compr_trigger(struct snd_com
}
break;
case SNDRV_PCM_TRIGGER_STOP:
+ wm_adsp_buffer_clear(compr->buf);
break;
default:
ret = -EINVAL;
[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:
arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
^ ~~~
The ones in iop shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/mach-iop13xx/setup.c | 8 ++++----
arch/arm/mach-iop13xx/tpmi.c | 10 +++++-----
arch/arm/plat-iop/adma.c | 6 +++---
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 53c316f7301e..fe4932fda01d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = {
}
};
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
+static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
static struct iop_adma_platform_data iop13xx_adma_0_data = {
.hw_id = 0,
.pool_size = PAGE_SIZE,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = {
.resource = iop13xx_adma_0_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_0_data,
},
};
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = {
.resource = iop13xx_adma_1_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_1_data,
},
};
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = {
.resource = iop13xx_adma_2_resources,
.dev = {
.dma_mask = &iop13xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop13xx_adma_2_data,
},
};
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index db511ec2b1df..116feb6b261e 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = {
}
};
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
+u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
static struct platform_device iop13xx_tpmi_0_device = {
.name = "iop-tpmi",
.id = 0,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = {
.resource = iop13xx_tpmi_0_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
.resource = iop13xx_tpmi_1_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
.resource = iop13xx_tpmi_2_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = {
.resource = iop13xx_tpmi_3_resources,
.dev = {
.dma_mask = &iop13xx_tpmi_mask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index a4d1f8de3b5b..d9612221e484 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = {
.resource = iop3xx_dma_0_resources,
.dev = {
.dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop3xx_dma_0_data,
},
};
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = {
.resource = iop3xx_dma_1_resources,
.dev = {
.dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop3xx_dma_1_data,
},
};
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = {
.resource = iop3xx_aau_resources,
.dev = {
.dma_mask = &iop3xx_adma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = (void *) &iop3xx_aau_data,
},
};
--
2.20.1
[ Upstream commit acaf892ecbf5be7710ae05a61fd43c668f68ad95 ]
Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.
If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.
Fixes these build errors:
arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/sh/boards/of-generic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 958f46da3a79..d91065e81a4e 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -164,10 +164,10 @@ static struct sh_machine_vector __initmv sh_of_generic_mv = {
struct sh_clk_ops;
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
}
-void __init plat_irq_setup(void)
+void __init __weak plat_irq_setup(void)
{
}
--
2.20.1
From: Sean Christopherson <[email protected]>
commit 9ce0a07a6f49822238fd4357c02e0dba060a43cc upstream.
RAX is not touched by nested_vmx_check_vmentry_hw(), directly or
indirectly (e.g. vmx_vmenter()). Remove it from the clobber list.
Fixes: 52017608da33 ("KVM: nVMX: add option to perform early consistency checks via H/W")
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/nested.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2793,7 +2793,7 @@ static int nested_vmx_check_vmentry_hw(s
[fail]"i"(offsetof(struct vcpu_vmx, fail)),
[host_rsp]"i"(offsetof(struct vcpu_vmx, host_rsp)),
[wordsize]"i"(sizeof(ulong))
- : "rax", "cc", "memory"
+ : "cc", "memory"
);
preempt_enable();
From: Anson Huang <[email protected]>
commit a329bbe707cee2cf8c660890ef2ad0d00ec7e8a3 upstream.
On i.MX8MQ platform, clock driver uses platform driver
model and it is probed after GPIO driver, so when GPIO
driver fails to get clock, it should check the error type
to decide whether to return defer probe or just ignore
the clock operation.
Fixes: 2808801aab8a ("gpio: mxc: add clock operation")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-mxc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -438,8 +438,11 @@ static int mxc_gpio_probe(struct platfor
/* the controller clock is optional */
port->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(port->clk))
+ if (IS_ERR(port->clk)) {
+ if (PTR_ERR(port->clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
port->clk = NULL;
+ }
err = clk_prepare_enable(port->clk);
if (err) {
From: Jeremy Fertic <[email protected]>
commit 10bfe7cc1739c22f0aa296b39e53f61e9e3f4d99 upstream.
With adt7516/7/9, internal vref is available for dacs a and b, dacs c and
d, or all dacs. The driver doesn't currently support internal vref for all
dacs. Change the else if to an if so both bits are checked rather than
just one or the other.
Signed-off-by: Jeremy Fertic <[email protected]>
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/addac/adt7316.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1079,7 +1079,7 @@ static ssize_t adt7316_store_DAC_interna
ldac_config = chip->ldac_config & (~ADT7516_DAC_IN_VREF_MASK);
if (data & 0x1)
ldac_config |= ADT7516_DAC_AB_IN_VREF;
- else if (data & 0x2)
+ if (data & 0x2)
ldac_config |= ADT7516_DAC_CD_IN_VREF;
} else {
ret = kstrtou8(buf, 16, &data);
From: Jeffrey Hugo <[email protected]>
commit 0c8ff62504e3a667387e87889a259632c3199a86 upstream.
The usb30_master_clk supports a 60Mhz frequency, but that is missing from
the table of supported frequencies. Add it.
Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
Signed-off-by: Jeffrey Hugo <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/qcom/gcc-msm8998.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -1112,6 +1112,7 @@ static struct clk_rcg2 ufs_axi_clk_src =
static const struct freq_tbl ftbl_usb30_master_clk_src[] = {
F(19200000, P_XO, 1, 0, 0),
+ F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
F(120000000, P_GPLL0_OUT_MAIN, 5, 0, 0),
F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
{ }
From: John Garry <[email protected]>
commit e1ba0b0b44512c5a209526c09ea3eb7d256b6951 upstream.
A NULL-pointer dereference was introduced for TMF SSP commands from the
upstreaming reworking.
Fix this by relocating the scsi_get_prot_op() callsite.
Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1033,8 +1033,8 @@ static void prep_ssp_v3_hw(struct hisi_h
struct sas_ssp_task *ssp_task = &task->ssp_task;
struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
struct hisi_sas_tmf_task *tmf = slot->tmf;
- unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
int has_data = 0, priority = !!tmf;
+ unsigned char prot_op;
u8 *buf_cmd;
u32 dw1 = 0, dw2 = 0, len = 0;
@@ -1049,6 +1049,7 @@ static void prep_ssp_v3_hw(struct hisi_h
dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF;
dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF;
} else {
+ prot_op = scsi_get_prot_op(scsi_cmnd);
dw1 |= 1 << CMD_HDR_FRAME_TYPE_OFF;
switch (scsi_cmnd->sc_data_direction) {
case DMA_TO_DEVICE:
[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]
Ratelimit RX error logs.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f765869bd864..0ccf91a08290 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3407,9 +3407,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
* ignored
*/
if (frame_len > priv->dma_buf_sz) {
- netdev_err(priv->dev,
- "len %d larger than size (%d)\n",
- frame_len, priv->dma_buf_sz);
+ if (net_ratelimit())
+ netdev_err(priv->dev,
+ "len %d larger than size (%d)\n",
+ frame_len, priv->dma_buf_sz);
priv->dev->stats.rx_length_errors++;
break;
}
@@ -3466,9 +3467,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
} else {
skb = rx_q->rx_skbuff[entry];
if (unlikely(!skb)) {
- netdev_err(priv->dev,
- "%s: Inconsistent Rx chain\n",
- priv->dev->name);
+ if (net_ratelimit())
+ netdev_err(priv->dev,
+ "%s: Inconsistent Rx chain\n",
+ priv->dev->name);
priv->dev->stats.rx_dropped++;
break;
}
--
2.20.1
[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]
Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.
Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.
Signed-off-by: Omri Kahalon <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 13c48883ed61..619f96940b65 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -81,8 +81,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
- if (vport)
- MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
+ MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
in, nic_vport_context);
@@ -110,8 +109,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport,
MLX5_SET(modify_esw_vport_context_in, in, opcode,
MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT);
MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
- if (vport)
- MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
+ MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
}
--
2.20.1
[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]
clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:
arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
.coherent_dma_mask = DMA_BIT_MASK(64),
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
The ones in orion shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/arm/plat-orion/common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index a2399fd66e97..1e970873439c 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -622,7 +622,7 @@ static struct platform_device orion_xor0_shared = {
.resource = orion_xor0_shared_resources,
.dev = {
.dma_mask = &orion_xor_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &orion_xor0_pdata,
},
};
@@ -683,7 +683,7 @@ static struct platform_device orion_xor1_shared = {
.resource = orion_xor1_shared_resources,
.dev = {
.dma_mask = &orion_xor_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &orion_xor1_pdata,
},
};
--
2.20.1
From: Brian Norris <[email protected]>
commit 771acc7e4a6e5dba779cb1a7fd851a164bc81033 upstream.
Badly-designed systems might have (for example) active-high wake pins
that default to high (e.g., because of external pull ups) until they
have an active firmware which starts driving it low. This can cause an
interrupt storm in the time between request_irq() and disable_irq().
We don't support shared interrupts here, so let's just pre-configure the
interrupt to avoid auto-enabling it.
Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support")
Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btusb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2885,6 +2885,7 @@ static int btusb_config_oob_wake(struct
return 0;
}
+ irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
0, "OOB Wake-on-BT", data);
if (ret) {
@@ -2899,7 +2900,6 @@ static int btusb_config_oob_wake(struct
}
data->oob_wake_irq = irq;
- disable_irq(irq);
bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
return 0;
}
[ Upstream commit 676e4a6fe703f2dae699ee9d56f14516f9ada4ea ]
We want to avoid leaking pointer info from xdp_frame (that is placed in
top of frame) like commit 6dfb970d3dbd ("xdp: avoid leaking info stored in
frame data on page reuse"), and followup commit 97e19cce05e5 ("bpf:
reserve xdp_frame size in xdp headroom") that reserve this headroom.
These changes also affected how cpumap constructed SKBs, as xdpf->headroom
size changed, the skb data starting point were in-effect shifted with 32
bytes (sizeof xdp_frame). This was still okay, as the cpumap frame_size
calculation also included xdpf->headroom which were reduced by same amount.
A bug was introduced in commit 77ea5f4cbe20 ("bpf/cpumap: make sure
frame_size for build_skb is aligned if headroom isn't"), where the
xdpf->headroom became part of the SKB_DATA_ALIGN rounding up. This
round-up to find the frame_size is in principle still correct as it does
not exceed the 2048 bytes frame_size (which is max for ixgbe and i40e),
but the 32 bytes offset of pkt_data_start puts this over the 2048 bytes
limit. This cause skb_shared_info to spill into next frame. It is a little
hard to trigger, as the SKB need to use above 15 skb_shinfo->frags[] as
far as I calculate. This does happen in practise for TCP streams when
skb_try_coalesce() kicks in.
KASAN can be used to detect these wrong memory accesses, I've seen:
BUG: KASAN: use-after-free in skb_try_coalesce+0x3cb/0x760
BUG: KASAN: wild-memory-access in skb_release_data+0xe2/0x250
Driver veth also construct a SKB from xdp_frame in this way, but is not
affected, as it doesn't reserve/deduct the room (used by xdp_frame) from
the SKB headroom. Instead is clears the pointers via xdp_scrub_frame(),
and allows SKB to use this area.
The fix in this patch is to do like veth and instead allow SKB to (re)use
the area occupied by xdp_frame, by clearing via xdp_scrub_frame(). (This
does kill the idea of the SKB being able to access (mem) info from this
area, but I guess it was a bad idea anyhow, and it was already killed by
the veth changes.)
Fixes: 77ea5f4cbe20 ("bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't")
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
kernel/bpf/cpumap.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index 8974b3755670..3c18260403dd 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -162,10 +162,14 @@ static void cpu_map_kthread_stop(struct work_struct *work)
static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu,
struct xdp_frame *xdpf)
{
+ unsigned int hard_start_headroom;
unsigned int frame_size;
void *pkt_data_start;
struct sk_buff *skb;
+ /* Part of headroom was reserved to xdpf */
+ hard_start_headroom = sizeof(struct xdp_frame) + xdpf->headroom;
+
/* build_skb need to place skb_shared_info after SKB end, and
* also want to know the memory "truesize". Thus, need to
* know the memory frame size backing xdp_buff.
@@ -183,15 +187,15 @@ static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu,
* is not at a fixed memory location, with mixed length
* packets, which is bad for cache-line hotness.
*/
- frame_size = SKB_DATA_ALIGN(xdpf->len + xdpf->headroom) +
+ frame_size = SKB_DATA_ALIGN(xdpf->len + hard_start_headroom) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- pkt_data_start = xdpf->data - xdpf->headroom;
+ pkt_data_start = xdpf->data - hard_start_headroom;
skb = build_skb(pkt_data_start, frame_size);
if (!skb)
return NULL;
- skb_reserve(skb, xdpf->headroom);
+ skb_reserve(skb, hard_start_headroom);
__skb_put(skb, xdpf->len);
if (xdpf->metasize)
skb_metadata_set(skb, xdpf->metasize);
@@ -205,6 +209,9 @@ static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu,
* - RX ring dev queue index (skb_record_rx_queue)
*/
+ /* Allow SKB to reuse area used by xdp_frame */
+ xdp_scrub_frame(xdpf);
+
return skb;
}
--
2.20.1
[ Upstream commit b86bc2858b389255cd44555ce4b1e427b2b770c0 ]
This ensures that the address and length provided to DBG_DECRYPT and
DBG_ENCRYPT do not cause an overflow.
At the same time, pass the actual number of pages pinned in memory to
sev_unpin_memory() as a cleanup.
Reported-by: Cfir Cohen <[email protected]>
Signed-off-by: David Rientjes <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
arch/x86/kvm/svm.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e544cec812f9..2a07e43ee666 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -6815,7 +6815,8 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
struct page **src_p, **dst_p;
struct kvm_sev_dbg debug;
unsigned long n;
- int ret, size;
+ unsigned int size;
+ int ret;
if (!sev_guest(kvm))
return -ENOTTY;
@@ -6823,6 +6824,11 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
if (copy_from_user(&debug, (void __user *)(uintptr_t)argp->data, sizeof(debug)))
return -EFAULT;
+ if (!debug.len || debug.src_uaddr + debug.len < debug.src_uaddr)
+ return -EINVAL;
+ if (!debug.dst_uaddr)
+ return -EINVAL;
+
vaddr = debug.src_uaddr;
size = debug.len;
vaddr_end = vaddr + size;
@@ -6873,8 +6879,8 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
dst_vaddr,
len, &argp->error);
- sev_unpin_memory(kvm, src_p, 1);
- sev_unpin_memory(kvm, dst_p, 1);
+ sev_unpin_memory(kvm, src_p, n);
+ sev_unpin_memory(kvm, dst_p, n);
if (ret)
goto err;
--
2.20.1
[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[ 141.954673] Modules linked in: hns_enet_drv(-)
[ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32
[ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[ 142.027066] sp : ffff000013533b90
[ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[ 142.044420] x27: 0000000000000000 x26: 0000000000000000
[ 142.055113] x25: 0000000056000000 x24: 0000000000000015
[ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[ 142.087192] x19: 0000000000001000 x18: 0000000000000007
[ 142.097885] x17: 000000000000000e x16: 0000000000000001
[ 142.108578] x15: 0000000000000019 x14: 363139343a70616d
[ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[ 142.129963] x11: 00000000ffffffff x10: 0000000000000006
[ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[ 142.194120] Call trace:
[ 142.199030] __iommu_dma_unmap+0xc0/0xc8
[ 142.206920] iommu_dma_unmap_page+0x20/0x28
[ 142.215335] __iommu_unmap_page+0x40/0x60
[ 142.223399] hnae_unmap_buffer+0x110/0x134
[ 142.231639] hnae_free_desc+0x6c/0x10c
[ 142.239177] hnae_fini_ring+0x14/0x34
[ 142.246540] hnae_fini_queue+0x2c/0x40
[ 142.254080] hnae_put_handle+0x38/0xcc
[ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[ 142.272312] platform_drv_remove+0x24/0x64
[ 142.280552] device_release_driver_internal+0x17c/0x20c
[ 142.291070] driver_detach+0x4c/0x90
[ 142.298259] bus_remove_driver+0x5c/0xd8
[ 142.306148] driver_unregister+0x2c/0x54
[ 142.314037] platform_driver_unregister+0x10/0x18
[ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[ 142.335248] __arm64_sys_delete_module+0x214/0x25c
[ 142.344891] el0_svc_common+0xb0/0x10c
[ 142.352430] el0_svc_handler+0x24/0x80
[ 142.359968] el0_svc+0x8/0x7c0
[ 142.366104] ---[ end trace 60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c
index 79d03f8ee7b1..c7fa97a7e1f4 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -150,7 +150,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)
/* free desc along with its attached buffer */
static void hnae_free_desc(struct hnae_ring *ring)
{
- hnae_free_buffers(ring);
dma_unmap_single(ring_to_dev(ring), ring->desc_dma_addr,
ring->desc_num * sizeof(ring->desc[0]),
ring_to_dma_dir(ring));
@@ -183,6 +182,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)
/* fini ring, also free the buffer for the ring */
static void hnae_fini_ring(struct hnae_ring *ring)
{
+ if (is_rx_ring(ring))
+ hnae_free_buffers(ring);
+
hnae_free_desc(ring);
kfree(ring->desc_cb);
ring->desc_cb = NULL;
--
2.20.1
[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
.../ethernet/hisilicon/hns/hns_dsaf_main.c | 33 +++++++++++++++----
1 file changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index ac55db065f16..f5ff07cb2b72 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2750,6 +2750,17 @@ int hns_dsaf_get_regs_count(void)
return DSAF_DUMP_REGS_NUM;
}
+static int hns_dsaf_get_port_id(u8 port)
+{
+ if (port < DSAF_SERVICE_NW_NUM)
+ return port;
+
+ if (port >= DSAF_BASE_INNER_PORT_NUM)
+ return port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
+
+ return -EINVAL;
+}
+
static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
{
struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0, 1, 0, 0, 0x80};
@@ -2815,23 +2826,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
memset(&temp_key, 0x0, sizeof(temp_key));
mask_entry.addr[0] = 0x01;
hns_dsaf_set_mac_key(dsaf_dev, &mask_key, mask_entry.in_vlan_id,
- port, mask_entry.addr);
+ 0xf, mask_entry.addr);
tbl_tcam_mcast.tbl_mcast_item_vld = 1;
tbl_tcam_mcast.tbl_mcast_old_en = 0;
- if (port < DSAF_SERVICE_NW_NUM) {
- mskid = port;
- } else if (port >= DSAF_BASE_INNER_PORT_NUM) {
- mskid = port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
- } else {
+ /* set MAC port to handle multicast */
+ mskid = hns_dsaf_get_port_id(port);
+ if (mskid == -EINVAL) {
dev_err(dsaf_dev->dev, "%s,pnum(%d)error,key(%#x:%#x)\n",
dsaf_dev->ae_dev.name, port,
mask_key.high.val, mask_key.low.val);
return;
}
+ dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
+ mskid % 32, 1);
+ /* set pool bit map to handle multicast */
+ mskid = hns_dsaf_get_port_id(port_num);
+ if (mskid == -EINVAL) {
+ dev_err(dsaf_dev->dev,
+ "%s, pool bit map pnum(%d)error,key(%#x:%#x)\n",
+ dsaf_dev->ae_dev.name, port_num,
+ mask_key.high.val, mask_key.low.val);
+ return;
+ }
dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
mskid % 32, 1);
+
memcpy(&temp_key, &mask_key, sizeof(mask_key));
hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc,
(struct dsaf_tbl_tcam_data *)(&mask_key),
--
2.20.1
From: Jeremy Fertic <[email protected]>
commit 76b7fe8d6c4daf4db672eb953c892c6f6572a282 upstream.
The adt7316/7 and adt7516/7 have the option to output voltage proportional
to temperature on dac a and/or dac b. The default dac resolution in this
mode is 8 bits with the dac high resolution option enabling 10 bits. None
of these settings affect dacs c and d. Remove the "1 (12 bits)" output from
the show function since that is not an option for this mode. Return
"1 (10 bits)" if the device is one of the above mentioned chips and the dac
high resolution mode is enabled.
In the store function, the driver currently allows the user to write to the
ADT7316_DA_HIGH_RESOLUTION bit regardless of the device in use. Add a check
to return an error in the case of an adt7318 or adt7519. Remove the else
statement that clears the ADT7316_DA_HIGH_RESOLUTION bit. Instead, clear it
before conditionally enabling it, depending on user input. This matches the
typical pattern in the driver when an attribute is a boolean.
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/addac/adt7316.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -634,9 +634,7 @@ static ssize_t adt7316_show_da_high_reso
struct adt7316_chip_info *chip = iio_priv(dev_info);
if (chip->config3 & ADT7316_DA_HIGH_RESOLUTION) {
- if (chip->id == ID_ADT7316 || chip->id == ID_ADT7516)
- return sprintf(buf, "1 (12 bits)\n");
- if (chip->id == ID_ADT7317 || chip->id == ID_ADT7517)
+ if (chip->id != ID_ADT7318 && chip->id != ID_ADT7519)
return sprintf(buf, "1 (10 bits)\n");
}
@@ -653,10 +651,12 @@ static ssize_t adt7316_store_da_high_res
u8 config3;
int ret;
+ if (chip->id == ID_ADT7318 || chip->id == ID_ADT7519)
+ return -EPERM;
+
+ config3 = chip->config3 & (~ADT7316_DA_HIGH_RESOLUTION);
if (buf[0] == '1')
- config3 = chip->config3 | ADT7316_DA_HIGH_RESOLUTION;
- else
- config3 = chip->config3 & (~ADT7316_DA_HIGH_RESOLUTION);
+ config3 |= ADT7316_DA_HIGH_RESOLUTION;
ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
if (ret)
[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]
There is a race condition that could happen if hid_debug_rdesc_show()
is running while hdev is in the process of going away (device removal,
system suspend, etc) which could result in NULL pointer dereference:
BUG: unable to handle kernel paging request at 0000000783316040
CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
RIP: 0010:hid_dump_device+0x9b/0x160
Call Trace:
hid_debug_rdesc_show+0x72/0x1d0
seq_read+0xe0/0x410
full_proxy_read+0x5f/0x90
__vfs_read+0x3a/0x170
vfs_read+0xa0/0x150
ksys_read+0x58/0xc0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x55/0x110
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Grab driver_input_lock to make sure the input device exists throughout the
whole process of dumping the rdesc.
[[email protected]: update changelog a bit]
Signed-off-by: he, bo <[email protected]>
Signed-off-by: "Zhang, Jun" <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/hid/hid-debug.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index ac9fda1b5a72..1384e57182af 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -1060,10 +1060,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)
seq_printf(f, "\n\n");
/* dump parsed data and input mappings */
+ if (down_interruptible(&hdev->driver_input_lock))
+ return 0;
+
hid_dump_device(hdev, f);
seq_printf(f, "\n");
hid_dump_input_mapping(hdev, f);
+ up(&hdev->driver_input_lock);
+
return 0;
}
--
2.20.1
[ Upstream commit 20bb907f7dc82ecc9e135ad7067ac7eb69c81222 ]
Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.
[ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[ 86.555572] Disabling non-boot CPUs ...
[ 86.555664] Successfully put all powerdomains to target state
[ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563751] twl4030: I2C error -13 reading PIH ISR
[ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563812] twl4030: I2C error -13 reading PIH ISR
[ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563903] twl4030: I2C error -13 reading PIH ISR
This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.
Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
Signed-off-by: Andreas Kemnade <[email protected]>
Tested-by: Tony Lindgren <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 299016bc46d9..104477b512a2 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1245,6 +1245,28 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
return status;
}
+static int __maybe_unused twl_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (client->irq)
+ disable_irq(client->irq);
+
+ return 0;
+}
+
+static int __maybe_unused twl_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (client->irq)
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
+
static const struct i2c_device_id twl_ids[] = {
{ "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
{ "twl5030", 0 }, /* T2 updated */
@@ -1262,6 +1284,7 @@ static const struct i2c_device_id twl_ids[] = {
/* One Client Driver , 4 Clients */
static struct i2c_driver twl_driver = {
.driver.name = DRIVER_NAME,
+ .driver.pm = &twl_dev_pm_ops,
.id_table = twl_ids,
.probe = twl_probe,
.remove = twl_remove,
--
2.20.1
[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
fs/jffs2/readinode.c | 5 -----
fs/jffs2/super.c | 5 ++++-
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 389ea53ea487..bccfc40b3a74 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);
- if (f->target) {
- kfree(f->target);
- f->target = NULL;
- }
-
fds = f->dents;
while(fds) {
fd = fds;
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bb6ae387469f..05d892c79339 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)
static void jffs2_i_callback(struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
- kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
+ struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+
+ kfree(f->target);
+ kmem_cache_free(jffs2_inode_cachep, f);
}
static void jffs2_destroy_inode(struct inode *inode)
--
2.20.1
[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]
This is log is harmful as it can trigger multiple times per packet. Delete
it.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index c55a9815b394..b7dd4e3c760d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -91,8 +91,6 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
return dma_own;
if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
- pr_warn("%s: Oversized frame spanned multiple buffers\n",
- __func__);
stats->rx_length_errors++;
return discard_frame;
}
--
2.20.1
[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]
When reboot the system again and again, may cause a memory
overwrite.
[ 15.638922] systemd[1]: Reached target Swap.
[ 15.667561] tun: Universal TUN/TAP device driver, 1.6
[ 15.676756] Bridge firewalling registered
[ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[ 17.352179] Mem abort info:
[ 17.355007] ESR = 0x96000004
[ 17.358105] Exception class = DABT (current EL), IL = 32 bits
[ 17.364112] SET = 0, FnV = 0
[ 17.367209] EA = 0, S1PTW = 0
[ 17.370393] Data abort info:
[ 17.373315] ISV = 0, ISS = 0x00000004
[ 17.377206] CM = 0, WnR = 0
[ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 17.386926] [0000000200000040] pgd=0000000000000000
[ 17.391878] Internal error: Oops: 96000004 [#1] SMP
[ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1
[ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[ 17.425615] Workqueue: events_unbound async_run_entry_fn
[ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[ 17.461701] sp : ffff000100d9bb60
[ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[ 17.525272] x17: 0000000200000000 x16: 0000000200000000
[ 17.534511] x15: 0000000000000000 x14: 0000000000000000
[ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[ 17.617438] Call trace:
[ 17.623349] __mutex_lock.isra.1+0x74/0x540
[ 17.630927] __mutex_lock_slowpath+0x24/0x30
[ 17.638602] mutex_lock+0x50/0x60
[ 17.645295] drain_workqueue+0x34/0x198
[ 17.652623] __sas_drain_work+0x7c/0x168
[ 17.659903] sas_drain_work+0x60/0x68
[ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[ 17.676129] do_scsi_scan_host+0x70/0xb0
[ 17.683534] do_scan_async+0x20/0x228
[ 17.690586] async_run_entry_fn+0x4c/0x1d0
[ 17.697997] process_one_work+0x1b4/0x3f8
[ 17.705296] worker_thread+0x54/0x470
Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
index ba4316910dea..a60f207768fc 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -129,7 +129,7 @@ static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)
dsaf_set_bit(val, XGMAC_UNIDIR_EN_B, 0);
dsaf_set_bit(val, XGMAC_RF_TX_EN_B, 1);
dsaf_set_field(val, XGMAC_LF_RF_INSERT_M, XGMAC_LF_RF_INSERT_S, 0);
- dsaf_write_reg(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
+ dsaf_write_dev(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
}
/**
--
2.20.1
From: Sean Christopherson <[email protected]>
commit b6aa57c69cb26ea0160c51f7cf45f1af23542686 upstream.
To minimize the latency of timer interrupts as observed by the guest,
KVM adjusts the values it programs into the host timers to account for
the host's overhead of programming and handling the timer event. In
the event that the adjustments are too aggressive, i.e. the timer fires
earlier than the guest expects, KVM busy waits immediately prior to
entering the guest.
Currently, KVM manually converts the delay from nanoseconds to clock
cycles. But, the conversion is done in the guest's time domain, while
the delay occurs in the host's time domain. This is perfectly ok when
the guest and host are using the same TSC ratio, but if the guest is
using a different ratio then the delay may not be accurate and could
wait too little or too long.
When the guest is not using the host's ratio, convert the delay from
guest clock cycles to host nanoseconds and use ndelay() instead of
__delay() to provide more accurate timing. Because converting to
nanoseconds is relatively expensive, e.g. requires division and more
multiplication ops, continue using __delay() directly when guest and
host TSCs are running at the same ratio.
Cc: Liran Alon <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: [email protected]
Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically")
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1478,6 +1478,26 @@ static bool lapic_timer_int_injected(str
return false;
}
+static inline void __wait_lapic_expire(struct kvm_vcpu *vcpu, u64 guest_cycles)
+{
+ u64 timer_advance_ns = vcpu->arch.apic->lapic_timer.timer_advance_ns;
+
+ /*
+ * If the guest TSC is running at a different ratio than the host, then
+ * convert the delay to nanoseconds to achieve an accurate delay. Note
+ * that __delay() uses delay_tsc whenever the hardware has TSC, thus
+ * always for VMX enabled hardware.
+ */
+ if (vcpu->arch.tsc_scaling_ratio == kvm_default_tsc_scaling_ratio) {
+ __delay(min(guest_cycles,
+ nsec_to_cycles(vcpu, timer_advance_ns)));
+ } else {
+ u64 delay_ns = guest_cycles * 1000000ULL;
+ do_div(delay_ns, vcpu->arch.virtual_tsc_khz);
+ ndelay(min_t(u32, delay_ns, timer_advance_ns));
+ }
+}
+
void wait_lapic_expire(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
@@ -1498,10 +1518,8 @@ void wait_lapic_expire(struct kvm_vcpu *
guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
trace_kvm_wait_lapic_expire(vcpu->vcpu_id, guest_tsc - tsc_deadline);
- /* __delay is delay_tsc whenever the hardware has TSC, thus always. */
if (guest_tsc < tsc_deadline)
- __delay(min(tsc_deadline - guest_tsc,
- nsec_to_cycles(vcpu, timer_advance_ns)));
+ __wait_lapic_expire(vcpu, tsc_deadline - guest_tsc);
if (!apic->lapic_timer.timer_advance_adjust_done) {
/* too early */
[ Upstream commit b9a1ff504b9492ad6beb7d5606e0e3365d4d8499 ]
kfree() can leak the hctx->fq->flush_rq field.
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Shenghui Wang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
block/blk-mq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 16f9675c57e6..97eba6d23425 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2341,7 +2341,7 @@ static int blk_mq_init_hctx(struct request_queue *q,
return 0;
free_fq:
- kfree(hctx->fq);
+ blk_free_flush_queue(hctx->fq);
exit_hctx:
if (set->ops->exit_hctx)
set->ops->exit_hctx(hctx, hctx_idx);
--
2.20.1
[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]
When compiling with -Wformat, clang emits the following warnings:
drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for unsigned ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/vfio/pci/vfio_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index ff60bd1ea587..eb8fc8ccffc6 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1597,11 +1597,11 @@ static void __init vfio_pci_fill_ids(void)
rc = pci_add_dynid(&vfio_pci_driver, vendor, device,
subvendor, subdevice, class, class_mask, 0);
if (rc)
- pr_warn("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n",
+ pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n",
vendor, device, subvendor, subdevice,
class, class_mask, rc);
else
- pr_info("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n",
+ pr_info("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n",
vendor, device, subvendor, subdevice,
class, class_mask);
}
--
2.20.1
[ Upstream commit ca8c3b922e7032aff6cc3fd05548f4df1f3df90e ]
When CONFIG_CFG80211 isn't enabled the compiler correcly warns about
'sinfo.pertid' may be unused. It can also happen for other error
conditions that it not warn about.
net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’:
include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
kfree(sinfo->pertid);
~~~~~^~~~~~~~
Rework so that we only release '&sinfo' if cfg80211_get_station returns
zero.
Fixes: 7d652669b61d ("batman-adv: release station info tidstats")
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/batman-adv/bat_v_elp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index ef0dec20c7d8..5da183b2f4c9 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -104,8 +104,10 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
ret = cfg80211_get_station(real_netdev, neigh->addr, &sinfo);
- /* free the TID stats immediately */
- cfg80211_sinfo_release_content(&sinfo);
+ if (!ret) {
+ /* free the TID stats immediately */
+ cfg80211_sinfo_release_content(&sinfo);
+ }
dev_put(real_netdev);
if (ret == -ENOENT) {
--
2.20.1
[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]
When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels. The current code
produces one too many.
This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus=<n> on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs. While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).
Signed-off-by: Michael Kelley <[email protected]>
Reviewed-by: Vitaly Kuznetsov <[email protected]>
Reviewed-by: Long Li <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/scsi/storvsc_drv.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 84380bae20f1..e186743033f4 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -668,13 +668,22 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
{
struct device *dev = &device->device;
struct storvsc_device *stor_device;
- int num_cpus = num_online_cpus();
int num_sc;
struct storvsc_cmd_request *request;
struct vstor_packet *vstor_packet;
int ret, t;
- num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
+ /*
+ * If the number of CPUs is artificially restricted, such as
+ * with maxcpus=1 on the kernel boot line, Hyper-V could offer
+ * sub-channels >= the number of CPUs. These sub-channels
+ * should not be created. The primary channel is already created
+ * and assigned to one CPU, so check against # CPUs - 1.
+ */
+ num_sc = min((int)(num_online_cpus() - 1), max_chns);
+ if (!num_sc)
+ return;
+
stor_device = get_out_stor_device(device);
if (!stor_device)
return;
--
2.20.1
[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]
The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.
Reported-by: Wolfram Sang <[email protected]>
Reported-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Acked-by: Steve Twiss <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/rtc/rtc-da9063.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index b4e054c64bad..69b54e5556c0 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -480,6 +480,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)
da9063_data_to_tm(data, &rtc->alarm_time, rtc);
rtc->rtc_sync = false;
+ /*
+ * TODO: some models have alarms on a minute boundary but still support
+ * real hardware interrupts. Add this once the core supports it.
+ */
+ if (config->rtc_data_start != RTC_SEC)
+ rtc->rtc_dev->uie_unsupported = 1;
+
irq_alarm = platform_get_irq_byname(pdev, "ALARM");
ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
da9063_alarm_event,
--
2.20.1
From: Sean Christopherson <[email protected]>
commit 57bf67e73ce9bcce2258890f5abf2adf5f619f1a upstream.
To minimize the latency of timer interrupts as observed by the guest,
KVM adjusts the values it programs into the host timers to account for
the host's overhead of programming and handling the timer event. Now
that the timer advancement is automatically tuned during runtime, it's
effectively unbounded by default, e.g. if KVM is running as L1 the
advancement can measure in hundreds of milliseconds.
Disable timer advancement if adaptive tuning yields an advancement of
more than 5000ns, as large advancements can break reasonable assumptions
of the guest, e.g. that a timer configured to fire after 1ms won't
arrive on the next instruction. Although KVM busy waits to mitigate the
case of a timer event arriving too early, complications can arise when
shifting the interrupt too far, e.g. kvm-unit-test's vmx.interrupt test
will fail when its "host" exits on interrupts as KVM may inject the INTR
before the guest executes STI+HLT. Arguably the unit test is "broken"
in the sense that delaying a timer interrupt by 1ms doesn't technically
guarantee the interrupt will arrive after STI+HLT, but it's a reasonable
assumption that KVM should support.
Furthermore, an unbounded advancement also effectively unbounds the time
spent busy waiting, e.g. if the guest programs a timer with a very large
delay.
5000ns is a somewhat arbitrary threshold. When running on bare metal,
which is the intended use case, timer advancement is expected to be in
the general vicinity of 1000ns. 5000ns is high enough that false
positives are unlikely, while not being so high as to negatively affect
the host's performance/stability.
Note, a future patch will enable userspace to disable KVM's adaptive
tuning, which will allow priveleged userspace will to specifying an
advancement value in excess of this arbitrary threshold in order to
satisfy an abnormal use case.
Cc: Liran Alon <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: [email protected]
Fixes: 3b8a5df6c4dc6 ("KVM: LAPIC: Tune lapic_timer_advance_ns automatically")
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1519,6 +1519,10 @@ void wait_lapic_expire(struct kvm_vcpu *
}
if (abs(guest_tsc - tsc_deadline) < LAPIC_TIMER_ADVANCE_ADJUST_DONE)
lapic_timer_advance_adjust_done = true;
+ if (unlikely(lapic_timer_advance_ns > 5000)) {
+ lapic_timer_advance_ns = 0;
+ lapic_timer_advance_adjust_done = true;
+ }
}
}
From: Alan Stern <[email protected]>
commit c01c348ecdc66085e44912c97368809612231520 upstream.
Some drivers (such as the vub300 MMC driver) expect usb_string() to
return a properly NUL-terminated string, even when an error occurs.
(In fact, vub300's probe routine doesn't bother to check the return
code from usb_string().) When the driver goes on to use an
unterminated string, it leads to kernel errors such as
stack-out-of-bounds, as found by the syzkaller USB fuzzer.
An out-of-range string index argument is not at all unlikely, given
that some devices don't provide string descriptors and therefore list
0 as the value for their string indexes. This patch makes
usb_string() return a properly terminated empty string along with the
-EINVAL error code when an out-of-range index is encountered.
And since a USB string index is a single-byte value, indexes >= 256
are just as invalid as values of 0 or below.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: [email protected]
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/message.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -820,9 +820,11 @@ int usb_string(struct usb_device *dev, i
if (dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
- if (size <= 0 || !buf || !index)
+ if (size <= 0 || !buf)
return -EINVAL;
buf[0] = 0;
+ if (index <= 0 || index >= 256)
+ return -EINVAL;
tbuf = kmalloc(256, GFP_NOIO);
if (!tbuf)
return -ENOMEM;
[ Upstream commit 1cb1d2c64e812928fe0a40b8f7e74523d0283dbe ]
Blacklist "Universal Xport" LUN. It's used for in-band storage array
management. Also add model to the rdac dh family.
Cc: Martin Wilck <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: NetApp RDAC team <[email protected]>
Cc: Christophe Varoqui <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: SCSI ML <[email protected]>
Cc: DM ML <[email protected]>
Signed-off-by: Xose Vazquez Perez <[email protected]>
Reviewed-by: Martin Wilck <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_dh.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index c4cbfd07b916..a08ff3bd6310 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -238,6 +238,7 @@ static struct {
{"NETAPP", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+ {"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
{"SONY", "TSL", NULL, BLIST_FORCELUN}, /* DDS3 & DDS4 autoloaders */
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 5a58cbf3a75d..c14006ac98f9 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -75,6 +75,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
{"NETAPP", "INF-01-00", "rdac", },
{"LSI", "INF-01-00", "rdac", },
{"ENGENIO", "INF-01-00", "rdac", },
+ {"LENOVO", "DE_Series", "rdac", },
{NULL, NULL, NULL },
};
--
2.20.1
[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]
symlink body shouldn't be freed without an RCU delay. Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback. Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
fs/debugfs/inode.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 29c68c5d44d5..c4a4fc6f1a95 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -163,19 +163,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
return 0;
}
-static void debugfs_evict_inode(struct inode *inode)
+static void debugfs_i_callback(struct rcu_head *head)
{
- truncate_inode_pages_final(&inode->i_data);
- clear_inode(inode);
+ struct inode *inode = container_of(head, struct inode, i_rcu);
if (S_ISLNK(inode->i_mode))
kfree(inode->i_link);
+ free_inode_nonrcu(inode);
+}
+
+static void debugfs_destroy_inode(struct inode *inode)
+{
+ call_rcu(&inode->i_rcu, debugfs_i_callback);
}
static const struct super_operations debugfs_super_operations = {
.statfs = simple_statfs,
.remount_fs = debugfs_remount,
.show_options = debugfs_show_options,
- .evict_inode = debugfs_evict_inode,
+ .destroy_inode = debugfs_destroy_inode,
};
static void debugfs_release_dentry(struct dentry *dentry)
--
2.20.1
From: Alan Stern <[email protected]>
commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.
The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the
ds2490 driver. This bug is caused by improper use of the altsetting
array in the usb_interface structure (the array's entries are not
always stored in numerical order), combined with a naive assumption
that all interfaces probed by the driver will have the expected number
of altsettings.
The bug can be fixed by replacing references to the possibly
non-existent intf->altsetting[alt] entry with the guaranteed-to-exist
intf->cur_altsetting entry.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: [email protected]
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/w1/masters/ds2490.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1016,15 +1016,15 @@ static int ds_probe(struct usb_interface
/* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */
alt = 3;
err = usb_set_interface(dev->udev,
- intf->altsetting[alt].desc.bInterfaceNumber, alt);
+ intf->cur_altsetting->desc.bInterfaceNumber, alt);
if (err) {
dev_err(&dev->udev->dev, "Failed to set alternative setting %d "
"for %d interface: err=%d.\n", alt,
- intf->altsetting[alt].desc.bInterfaceNumber, err);
+ intf->cur_altsetting->desc.bInterfaceNumber, err);
goto err_out_clear;
}
- iface_desc = &intf->altsetting[alt];
+ iface_desc = intf->cur_altsetting;
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
pr_info("Num endpoints=%d. It is not DS9490R.\n",
iface_desc->desc.bNumEndpoints);
[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]
If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index e8855e6adb48..c42ef6c729c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -231,9 +231,10 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
* It doesn't match with the information reported into the databook.
* At any rate, we need to understand if the CSUM hw computation is ok
* and report this info to the upper layers. */
- ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
- !!(rdes0 & RDES0_FRAME_TYPE),
- !!(rdes0 & ERDES0_RX_MAC_ADDR));
+ if (likely(ret == good_frame))
+ ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
+ !!(rdes0 & RDES0_FRAME_TYPE),
+ !!(rdes0 & ERDES0_RX_MAC_ADDR));
if (unlikely(rdes0 & RDES0_DRIBBLING))
x->dribbling_bit++;
--
2.20.1
[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]
The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.
The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.
Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:
refcount_t: underflow; use-after-free.
Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
net/batman-adv/translation-table.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 8dcd4968cde7..2ee87d3ca6d0 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1337,9 +1337,10 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
unsigned short vid, const char *message,
bool roaming)
{
+ struct batadv_tt_local_entry *tt_removed_entry;
struct batadv_tt_local_entry *tt_local_entry;
u16 flags, curr_flags = BATADV_NO_FLAGS;
- void *tt_entry_exists;
+ struct hlist_node *tt_removed_node;
tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
if (!tt_local_entry)
@@ -1368,15 +1369,18 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
*/
batadv_tt_local_event(bat_priv, tt_local_entry, BATADV_TT_CLIENT_DEL);
- tt_entry_exists = batadv_hash_remove(bat_priv->tt.local_hash,
+ tt_removed_node = batadv_hash_remove(bat_priv->tt.local_hash,
batadv_compare_tt,
batadv_choose_tt,
&tt_local_entry->common);
- if (!tt_entry_exists)
+ if (!tt_removed_node)
goto out;
- /* extra call to free the local tt entry */
- batadv_tt_local_entry_put(tt_local_entry);
+ /* drop reference of remove hash entry */
+ tt_removed_entry = hlist_entry(tt_removed_node,
+ struct batadv_tt_local_entry,
+ common.hash_entry);
+ batadv_tt_local_entry_put(tt_removed_entry);
out:
if (tt_local_entry)
--
2.20.1
[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]
The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead
of inline in the .c file.
Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <[email protected]>
Reviewed-by: Kai-Heng Feng <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
---
.../net/ethernet/intel/igb/e1000_defines.h | 2 +
drivers/net/ethernet/intel/igb/igb_main.c | 57 +++----------------
2 files changed, 10 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 01fcfc6f3415..d2e2c50ce257 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -194,6 +194,8 @@
/* enable link status from external LINK_0 and LINK_1 pins */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 7137e7f9c7f3..21ccadb720d1 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8755,9 +8755,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, rctl, status;
u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
+ bool wake;
rtnl_lock();
netif_device_detach(netdev);
@@ -8770,14 +8768,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
igb_clear_interrupt_scheme(adapter);
rtnl_unlock();
-#ifdef CONFIG_PM
- if (!runtime) {
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
- }
-#endif
-
status = rd32(E1000_STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
@@ -8794,10 +8784,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
ctrl = rd32(E1000_CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
ctrl |= E1000_CTRL_ADVD3WUC;
wr32(E1000_CTRL, ctrl);
@@ -8811,12 +8797,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
wr32(E1000_WUFC, 0);
}
- *enable_wake = wufc || adapter->en_mng_pt;
- if (!*enable_wake)
+ wake = wufc || adapter->en_mng_pt;
+ if (!wake)
igb_power_down_link(adapter);
else
igb_power_up_link(adapter);
+ if (enable_wake)
+ *enable_wake = wake;
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
@@ -8859,22 +8848,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)
static int __maybe_unused igb_suspend(struct device *dev)
{
- int retval;
- bool wake;
- struct pci_dev *pdev = to_pci_dev(dev);
-
- retval = __igb_shutdown(pdev, &wake, 0);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
+ return __igb_shutdown(to_pci_dev(dev), NULL, 0);
}
static int __maybe_unused igb_resume(struct device *dev)
@@ -8945,22 +8919,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)
static int __maybe_unused igb_runtime_suspend(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
-
- retval = __igb_shutdown(pdev, &wake, 1);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
+ return __igb_shutdown(to_pci_dev(dev), NULL, 1);
}
static int __maybe_unused igb_runtime_resume(struct device *dev)
--
2.20.1
From: Alan Stern <[email protected]>
commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.
The syzkaller fuzzer reported a bug in the USB hub driver which turned
out to be caused by a negative runtime-PM usage counter. This allowed
a hub to be runtime suspended at a time when the driver did not expect
it. The symptom is a WARNING issued because the hub's status URB is
submitted while it is already active:
URB 0000000031fb463e submitted while active
WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363
The negative runtime-PM usage count was caused by an unfortunate
design decision made when runtime PM was first implemented for USB.
At that time, USB class drivers were allowed to unbind from their
interfaces without balancing the usage counter (i.e., leaving it with
a positive count). The core code would take care of setting the
counter back to 0 before allowing another driver to bind to the
interface.
Later on when runtime PM was implemented for the entire kernel, the
opposite decision was made: Drivers were required to balance their
runtime-PM get and put calls. In order to maintain backward
compatibility, however, the USB subsystem adapted to the new
implementation by keeping an independent usage counter for each
interface and using it to automatically adjust the normal usage
counter back to 0 whenever a driver was unbound.
This approach involves duplicating information, but what is worse, it
doesn't work properly in cases where a USB class driver delays
decrementing the usage counter until after the driver's disconnect()
routine has returned and the counter has been adjusted back to 0.
Doing so would cause the usage counter to become negative. There's
even a warning about this in the USB power management documentation!
As it happens, this is exactly what the hub driver does. The
kick_hub_wq() routine increments the runtime-PM usage counter, and the
corresponding decrement is carried out by hub_event() in the context
of the hub_wq work-queue thread. This work routine may sometimes run
after the driver has been unbound from its interface, and when it does
it causes the usage counter to go negative.
It is not possible for hub_disconnect() to wait for a pending
hub_event() call to finish, because hub_disconnect() is called with
the device lock held and hub_event() acquires that lock. The only
feasible fix is to reverse the original design decision: remove the
duplicate interface-specific usage counter and require USB drivers to
balance their runtime PM gets and puts. As far as I know, all
existing drivers currently do this.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: [email protected]
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/driver-api/usb/power-management.rst | 14 +++++++++-----
drivers/usb/core/driver.c | 13 -------------
drivers/usb/storage/realtek_cr.c | 13 +++++--------
include/linux/usb.h | 2 --
4 files changed, 14 insertions(+), 28 deletions(-)
--- a/Documentation/driver-api/usb/power-management.rst
+++ b/Documentation/driver-api/usb/power-management.rst
@@ -370,11 +370,15 @@ autosuspend the interface's device. Whe
then the interface is considered to be idle, and the kernel may
autosuspend the device.
-Drivers need not be concerned about balancing changes to the usage
-counter; the USB core will undo any remaining "get"s when a driver
-is unbound from its interface. As a corollary, drivers must not call
-any of the ``usb_autopm_*`` functions after their ``disconnect``
-routine has returned.
+Drivers must be careful to balance their overall changes to the usage
+counter. Unbalanced "get"s will remain in effect when a driver is
+unbound from its interface, preventing the device from going into
+runtime suspend should the interface be bound to a driver again. On
+the other hand, drivers are allowed to achieve this balance by calling
+the ``usb_autopm_*`` functions even after their ``disconnect`` routine
+has returned -- say from within a work-queue routine -- provided they
+retain an active reference to the interface (via ``usb_get_intf`` and
+``usb_put_intf``).
Drivers using the async routines are responsible for their own
synchronization and mutual exclusion.
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -473,11 +473,6 @@ static int usb_unbind_interface(struct d
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
- /* Undo any residual pm_autopm_get_interface_* calls */
- for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r)
- usb_autopm_put_interface_no_suspend(intf);
- atomic_set(&intf->pm_usage_cnt, 0);
-
if (!error)
usb_autosuspend_device(udev);
@@ -1633,7 +1628,6 @@ void usb_autopm_put_interface(struct usb
int status;
usb_mark_last_busy(udev);
- atomic_dec(&intf->pm_usage_cnt);
status = pm_runtime_put_sync(&intf->dev);
dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
__func__, atomic_read(&intf->dev.power.usage_count),
@@ -1662,7 +1656,6 @@ void usb_autopm_put_interface_async(stru
int status;
usb_mark_last_busy(udev);
- atomic_dec(&intf->pm_usage_cnt);
status = pm_runtime_put(&intf->dev);
dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
__func__, atomic_read(&intf->dev.power.usage_count),
@@ -1684,7 +1677,6 @@ void usb_autopm_put_interface_no_suspend
struct usb_device *udev = interface_to_usbdev(intf);
usb_mark_last_busy(udev);
- atomic_dec(&intf->pm_usage_cnt);
pm_runtime_put_noidle(&intf->dev);
}
EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend);
@@ -1715,8 +1707,6 @@ int usb_autopm_get_interface(struct usb_
status = pm_runtime_get_sync(&intf->dev);
if (status < 0)
pm_runtime_put_sync(&intf->dev);
- else
- atomic_inc(&intf->pm_usage_cnt);
dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
__func__, atomic_read(&intf->dev.power.usage_count),
status);
@@ -1750,8 +1740,6 @@ int usb_autopm_get_interface_async(struc
status = pm_runtime_get(&intf->dev);
if (status < 0 && status != -EINPROGRESS)
pm_runtime_put_noidle(&intf->dev);
- else
- atomic_inc(&intf->pm_usage_cnt);
dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
__func__, atomic_read(&intf->dev.power.usage_count),
status);
@@ -1775,7 +1763,6 @@ void usb_autopm_get_interface_no_resume(
struct usb_device *udev = interface_to_usbdev(intf);
usb_mark_last_busy(udev);
- atomic_inc(&intf->pm_usage_cnt);
pm_runtime_get_noresume(&intf->dev);
}
EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -763,18 +763,16 @@ static void rts51x_suspend_timer_fn(stru
break;
case RTS51X_STAT_IDLE:
case RTS51X_STAT_SS:
- usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n",
- atomic_read(&us->pusb_intf->pm_usage_cnt),
+ usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n",
atomic_read(&us->pusb_intf->dev.power.usage_count));
- if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) {
+ if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) {
usb_stor_dbg(us, "Ready to enter SS state\n");
rts51x_set_stat(chip, RTS51X_STAT_SS);
/* ignore mass storage interface's children */
pm_suspend_ignore_children(&us->pusb_intf->dev, true);
usb_autopm_put_interface_async(us->pusb_intf);
- usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n",
- atomic_read(&us->pusb_intf->pm_usage_cnt),
+ usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n",
atomic_read(&us->pusb_intf->dev.power.usage_count));
}
break;
@@ -807,11 +805,10 @@ static void rts51x_invoke_transport(stru
int ret;
if (working_scsi(srb)) {
- usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n",
- atomic_read(&us->pusb_intf->pm_usage_cnt),
+ usb_stor_dbg(us, "working scsi, power.usage:%d\n",
atomic_read(&us->pusb_intf->dev.power.usage_count));
- if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) {
+ if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) {
ret = usb_autopm_get_interface(us->pusb_intf);
usb_stor_dbg(us, "working scsi, ret=%d\n", ret);
}
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -200,7 +200,6 @@ usb_find_last_int_out_endpoint(struct us
* @dev: driver model's view of this device
* @usb_dev: if an interface is bound to the USB major, this will point
* to the sysfs representation for that device.
- * @pm_usage_cnt: PM usage counter for this interface
* @reset_ws: Used for scheduling resets from atomic context.
* @resetting_device: USB core reset the device, so use alt setting 0 as
* current; needs bandwidth alloc after reset.
@@ -257,7 +256,6 @@ struct usb_interface {
struct device dev; /* interface specific device info */
struct device *usb_dev;
- atomic_t pm_usage_cnt; /* usage counter for autosuspend */
struct work_struct reset_ws; /* for resets in atomic context */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
From: Douglas Anderson <[email protected]>
commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream.
The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent
adapter status variables") had a fairly straightforward bug in it. It
contained this bit of diff:
- if (!adapter->is_suspended) {
+ if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
As you can see the patch missed the "!" when converting to the atomic
bitops. This meant that the resume hasn't done anything at all since
that commit landed and suspend/resume for mwifiex SDIO cards has been
totally broken.
After fixing this mwifiex suspend/resume appears to work again, at
least with the simple testing I've done.
Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables")
Cc: <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -181,7 +181,7 @@ static int mwifiex_sdio_resume(struct de
adapter = card->adapter;
- if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
+ if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
mwifiex_dbg(adapter, WARN,
"device already resumed\n");
return 0;
From: Tycho Andersen <[email protected]>
commit 7a0df7fbc14505e2e2be19ed08654a09e1ed5bf6 upstream.
As the comment notes, the return codes for TSYNC and NEW_LISTENER
conflict, because they both return positive values, one in the case of
success and one in the case of error. So, let's disallow both of these
flags together.
While this is technically a userspace break, all the users I know
of are still waiting on me to land this feature in libseccomp, so I
think it'll be safe. Also, at present my use case doesn't require
TSYNC at all, so this isn't a big deal to disallow. If someone
wanted to support this, a path forward would be to add a new flag like
TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN,
but the use cases are so different I don't see it really happening.
Finally, it's worth noting that this does actually fix a UAF issue: at the
end of seccomp_set_mode_filter(), we have:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
if (ret < 0) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
out_free:
seccomp_filter_free(prepared);
But if ret > 0 because TSYNC raced, we'll install the listener fd and then
free the filter out from underneath it, causing a UAF when the task closes
it or dies. This patch also switches the condition to be simply if (ret),
so that if someone does add the flag mentioned above, they won't have to
remember to fix this too.
Reported-by: [email protected]
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
CC: [email protected] # v5.0+
Signed-off-by: Tycho Andersen <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Acked-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/seccomp.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -500,7 +500,10 @@ out:
*
* Caller must be holding current->sighand->siglock lock.
*
- * Returns 0 on success, -ve on error.
+ * Returns 0 on success, -ve on error, or
+ * - in TSYNC mode: the pid of a thread which was either not in the correct
+ * seccomp mode or did not have an ancestral seccomp filter
+ * - in NEW_LISTENER mode: the fd of the new listener
*/
static long seccomp_attach_filter(unsigned int flags,
struct seccomp_filter *filter)
@@ -1256,6 +1259,16 @@ static long seccomp_set_mode_filter(unsi
if (flags & ~SECCOMP_FILTER_FLAG_MASK)
return -EINVAL;
+ /*
+ * In the successful case, NEW_LISTENER returns the new listener fd.
+ * But in the failure case, TSYNC returns the thread that died. If you
+ * combine these two flags, there's no way to tell whether something
+ * succeeded or failed. So, let's disallow this combination.
+ */
+ if ((flags & SECCOMP_FILTER_FLAG_TSYNC) &&
+ (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER))
+ return -EINVAL;
+
/* Prepare the new filter before holding any locks. */
prepared = seccomp_prepare_user_filter(filter);
if (IS_ERR(prepared))
@@ -1302,7 +1315,7 @@ out:
mutex_unlock(¤t->signal->cred_guard_mutex);
out_put_fd:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
- if (ret < 0) {
+ if (ret) {
listener_f->private_data = NULL;
fput(listener_f);
put_unused_fd(listener);
From: Alan Stern <[email protected]>
commit fc834e607ae3d18e1a20bca3f9a2d7f52ea7a2be upstream.
The syzkaller USB fuzzer identified a failure mode in which dummy-hcd
would never give back an unlinked URB. This causes usb_kill_urb() to
hang, leading to WARNINGs and unkillable threads.
In dummy-hcd, all URBs are given back by the dummy_timer() routine as
it scans through the list of pending URBS. Failure to give back URBs
can be caused by failure to start or early exit from the scanning
loop. The code currently has two such pathways: One is triggered when
an unsupported bus transfer speed is encountered, and the other by
exhausting the simulated bandwidth for USB transfers during a frame.
This patch removes those two paths, thereby allowing all unlinked URBs
to be given back in a timely manner. It adds a check for the bus
speed when the gadget first starts running, so that dummy_timer() will
never thereafter encounter an unsupported speed. And it prevents the
loop from exiting as soon as the total bandwidth has been used up (the
scanning loop continues, giving back unlinked URBs as they are found,
but not transferring any more data).
Thanks to Andrey Konovalov for manually running the syzkaller fuzzer
to help track down the source of the bug.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: [email protected]
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/dummy_hcd.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -979,8 +979,18 @@ static int dummy_udc_start(struct usb_ga
struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
struct dummy *dum = dum_hcd->dum;
- if (driver->max_speed == USB_SPEED_UNKNOWN)
+ switch (g->speed) {
+ /* All the speeds we support */
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ break;
+ default:
+ dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n",
+ driver->max_speed);
return -EINVAL;
+ }
/*
* SLAVE side init ... the layer above hardware, which
@@ -1784,9 +1794,10 @@ static void dummy_timer(struct timer_lis
/* Bus speed is 500000 bytes/ms, so use a little less */
total = 490000;
break;
- default:
+ default: /* Can't happen */
dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
- return;
+ total = 0;
+ break;
}
/* FIXME if HZ != 1000 this will probably misbehave ... */
@@ -1828,7 +1839,7 @@ restart:
/* Used up this frame's bandwidth? */
if (total <= 0)
- break;
+ continue;
/* find the gadget's ep for this request (if configured) */
address = usb_pipeendpoint (urb->pipe);
On Mon, 6 May 2019 at 20:04, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.0.14 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.0.14-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.0.y
git commit: 5b4a1a11a18cf15168a00c41c55384b2558cdee0
git describe: v5.0.13-123-g5b4a1a11a18c
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.0-oe/build/v5.0.13-123-g5b4a1a11a18c
No regressions (compared to build v5.0.13)
No fixes (compared to build v5.0.13)
Ran 25048 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kvm-unit-tests
* ltp-fs-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 06/05/2019 15:30, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.0.14 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.0:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 5.0.14-rc1-g5b4a1a1
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Tue, May 07, 2019 at 01:45:04PM +0100, Jon Hunter wrote:
>
> On 06/05/2019 15:30, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.0.14 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> All tests are passing for Tegra ...
>
> Test results for stable-v5.0:
> 12 builds: 12 pass, 0 fail
> 22 boots: 22 pass, 0 fail
> 32 tests: 32 pass, 0 fail
>
> Linux version: 5.0.14-rc1-g5b4a1a1
> Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
> tegra194-p2972-0000, tegra20-ventana,
> tegra210-p2371-2180, tegra30-cardhu-a04
>
Thanks for testing all of these and letting me know,
greg k-h
On Tue, May 07, 2019 at 12:48:45PM +0530, Naresh Kamboju wrote:
> On Mon, 6 May 2019 at 20:04, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.0.14 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Wonderful, thanks for testing all of these and letting me know.
greg k-h
stable-rc/linux-5.0.y boot: 56 boots: 0 failed, 56 passed (v5.0.13-123-g5b4a1a11a18c)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-5.0.y/kernel/v5.0.13-123-g5b4a1a11a18c/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-5.0.y/kernel/v5.0.13-123-g5b4a1a11a18c/
Tree: stable-rc
Branch: linux-5.0.y
Git Describe: v5.0.13-123-g5b4a1a11a18c
Git Commit: 5b4a1a11a18cf15168a00c41c55384b2558cdee0
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 25 unique boards, 11 SoC families, 10 builds out of 208
---
For more info write to <[email protected]>
On Mon, May 06, 2019 at 04:30:58PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.0.14 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 349 pass: 349 fail: 0
Guenter
On Tue, May 07, 2019 at 11:39:41AM -0700, Guenter Roeck wrote:
> On Mon, May 06, 2019 at 04:30:58PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.0.14 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 159 pass: 159 fail: 0
> Qemu test results:
> total: 349 pass: 349 fail: 0
Wonderful, thanks for testing all of these and letting me know.
greg k-h
On 5/6/19 8:30 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.0.14 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Mon, May 06, 2019 at 04:30:58PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.0.14 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Compiled, booted, and no dmesg regressions on my system.
-Kelsey
On Tue, May 07, 2019 at 06:56:00PM -0600, Kelsey Skunberg wrote:
> On Mon, May 06, 2019 at 04:30:58PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.0.14 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
>
> Compiled, booted, and no dmesg regressions on my system.
Great! Thanks for testing and letting me know.
greg k-h
On Tue, May 07, 2019 at 02:19:45PM -0600, shuah wrote:
> On 5/6/19 8:30 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.0.14 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 08 May 2019 02:29:09 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.0.14-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.0.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h