This patch adds support for power management private feature under
FPGA Management Engine (FME). This private feature driver registers
a hwmon for power (power1_input), thresholds information, e.g.
(power1_cap / crit) and also read-only sysfs interfaces for other
power management information. For configuration, user could write
threshold values via above power1_cap / crit sysfs interface
under hwmon too.
Signed-off-by: Luwei Kang <[email protected]>
Signed-off-by: Xu Yilun <[email protected]>
Signed-off-by: Wu Hao <[email protected]>
---
v2: create a dfl_fme_power hwmon to expose power sysfs interfaces.
move all sysfs interfaces under hwmon
consumed --> hwmon power1_input
threshold1 --> hwmon power1_cap
threshold2 --> hwmon power1_crit
threshold1_status --> hwmon power1_cap_status
threshold2_status --> hwmon power1_crit_status
xeon_limit --> hwmon power1_xeon_limit
fpga_limit --> hwmon power1_fpga_limit
ltr --> hwmon power1_ltr
---
Documentation/ABI/testing/sysfs-platform-dfl-fme | 67 ++++++
drivers/fpga/dfl-fme-main.c | 247 +++++++++++++++++++++++
2 files changed, 314 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
index dfbd315..e2ba92d 100644
--- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -52,6 +52,7 @@ Contact: Wu Hao <[email protected]>
Description: Read-Only. Read this file to get the name of hwmon device, it
supports values:
'dfl_fme_thermal' - thermal hwmon device name
+ 'dfl_fme_power' - power hwmon device name
What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
Date: April 2019
@@ -108,3 +109,69 @@ Description: Read-Only. Read this file to get the policy of hardware threshold1
(see 'temp1_alarm'). It only supports two values (policies):
0 - AP2 state (90% throttling)
1 - AP1 state (50% throttling)
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-Only. It returns current FPGA power consumption in uW.
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-Write. Read this file to get current hardware power
+ threshold1 in uW. If power consumption rises at or above
+ this threshold, hardware starts 50% throttling.
+ Write this file to set current hardware power threshold1 in uW.
+ As hardware only accepts values in Watts, so input value will
+ be round down per Watts (< 1 watts part will be discarded).
+ Write fails with -EINVAL if input parsing fails or input isn't
+ in the valid range (0 - 127000000 uW).
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-Write. Read this file to get current hardware power
+ threshold2 in uW. If power consumption rises at or above
+ this threshold, hardware starts 90% throttling.
+ Write this file to set current hardware power threshold2 in uW.
+ As hardware only accepts values in Watts, so input value will
+ be round down per Watts (< 1 watts part will be discarded).
+ Write fails with -EINVAL if input parsing fails or input isn't
+ in the valid range (0 - 127000000 uW).
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap_status
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-only. It returns 1 if power consumption is currently at or
+ above hardware threshold1 (see 'power1_cap'), otherwise 0.
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_status
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-only. It returns 1 if power consumption is currently at or
+ above hardware threshold2 (see 'power1_crit'), otherwise 0.
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-Only. It returns power limit for XEON in uW.
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-Only. It returns power limit for FPGA in uW.
+
+What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
+Date: April 2019
+KernelVersion: 5.2
+Contact: Wu Hao <[email protected]>
+Description: Read-only. Read this file to get current Latency Tolerance
+ Reporting (ltr) value. This ltr impacts the CPU low power
+ state in integrated solution.
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index b9a68b8..7005316 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -425,6 +425,249 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
.uinit = fme_thermal_mgmt_uinit,
};
+#define FME_PWR_STATUS 0x8
+#define FME_LATENCY_TOLERANCE BIT_ULL(18)
+#define PWR_CONSUMED GENMASK_ULL(17, 0)
+
+#define FME_PWR_THRESHOLD 0x10
+#define PWR_THRESHOLD1 GENMASK_ULL(6, 0) /* in Watts */
+#define PWR_THRESHOLD2 GENMASK_ULL(14, 8) /* in Watts */
+#define PWR_THRESHOLD_MAX 0x7f /* in Watts */
+#define PWR_THRESHOLD1_STATUS BIT_ULL(16)
+#define PWR_THRESHOLD2_STATUS BIT_ULL(17)
+
+#define FME_PWR_XEON_LIMIT 0x18
+#define XEON_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
+#define XEON_PWR_EN BIT_ULL(15)
+#define FME_PWR_FPGA_LIMIT 0x20
+#define FPGA_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
+#define FPGA_PWR_EN BIT_ULL(15)
+
+#define PWR_THRESHOLD_MAX_IN_UW (PWR_THRESHOLD_MAX * 1000000)
+
+static int power_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u64 v;
+
+ switch (attr) {
+ case hwmon_power_input:
+ v = readq(feature->ioaddr + FME_PWR_STATUS);
+ *val = (long)(FIELD_GET(PWR_CONSUMED, v) * 1000000);
+ break;
+ case hwmon_power_cap:
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+ *val = (long)(FIELD_GET(PWR_THRESHOLD1, v) * 1000000);
+ break;
+ case hwmon_power_crit:
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+ *val = (long)(FIELD_GET(PWR_THRESHOLD2, v) * 1000000);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int power_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev->parent);
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ int ret = 0;
+ u64 v;
+
+ if (val < 0 || val > PWR_THRESHOLD_MAX_IN_UW)
+ return -EINVAL;
+
+ val = val / 1000000;
+
+ mutex_lock(&pdata->lock);
+
+ switch (attr) {
+ case hwmon_power_cap:
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+ v &= ~PWR_THRESHOLD1;
+ v |= FIELD_PREP(PWR_THRESHOLD1, val);
+ writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
+ break;
+ case hwmon_power_crit:
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+ v &= ~PWR_THRESHOLD2;
+ v |= FIELD_PREP(PWR_THRESHOLD2, val);
+ writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ mutex_unlock(&pdata->lock);
+
+ return ret;
+}
+
+static umode_t power_hwmon_attrs_visible(const void *drvdata,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (attr) {
+ case hwmon_power_input:
+ return 0444;
+ case hwmon_power_cap:
+ case hwmon_power_crit:
+ return 0644;
+ }
+
+ return 0;
+}
+
+static const u32 power_hwmon_config[] = {
+ HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CRIT,
+ 0
+};
+
+static const struct hwmon_channel_info hwmon_pwr_info = {
+ .type = hwmon_power,
+ .config = power_hwmon_config,
+};
+
+static const struct hwmon_channel_info *power_hwmon_info[] = {
+ &hwmon_pwr_info,
+ NULL
+};
+
+static const struct hwmon_ops power_hwmon_ops = {
+ .is_visible = power_hwmon_attrs_visible,
+ .read = power_hwmon_read,
+ .write = power_hwmon_write,
+};
+
+static const struct hwmon_chip_info power_hwmon_chip_info = {
+ .ops = &power_hwmon_ops,
+ .info = power_hwmon_info,
+};
+
+static ssize_t power1_cap_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u64 v;
+
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)FIELD_GET(PWR_THRESHOLD1_STATUS, v));
+}
+
+static ssize_t power1_crit_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u64 v;
+
+ v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)FIELD_GET(PWR_THRESHOLD2_STATUS, v));
+}
+
+static ssize_t power1_xeon_limit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u16 xeon_limit = 0;
+ u64 v;
+
+ v = readq(feature->ioaddr + FME_PWR_XEON_LIMIT);
+
+ if (FIELD_GET(XEON_PWR_EN, v))
+ xeon_limit = FIELD_GET(XEON_PWR_LIMIT, v);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", xeon_limit * 100000);
+}
+
+static ssize_t power1_fpga_limit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u16 fpga_limit = 0;
+ u64 v;
+
+ v = readq(feature->ioaddr + FME_PWR_FPGA_LIMIT);
+
+ if (FIELD_GET(FPGA_PWR_EN, v))
+ fpga_limit = FIELD_GET(FPGA_PWR_LIMIT, v);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", fpga_limit * 100000);
+}
+
+static ssize_t power1_ltr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature *feature = dev_get_drvdata(dev);
+ u64 v;
+
+ v = readq(feature->ioaddr + FME_PWR_STATUS);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)FIELD_GET(FME_LATENCY_TOLERANCE, v));
+}
+
+static DEVICE_ATTR_RO(power1_cap_status);
+static DEVICE_ATTR_RO(power1_crit_status);
+static DEVICE_ATTR_RO(power1_xeon_limit);
+static DEVICE_ATTR_RO(power1_fpga_limit);
+static DEVICE_ATTR_RO(power1_ltr);
+
+static struct attribute *power_extra_attrs[] = {
+ &dev_attr_power1_cap_status.attr,
+ &dev_attr_power1_crit_status.attr,
+ &dev_attr_power1_xeon_limit.attr,
+ &dev_attr_power1_fpga_limit.attr,
+ &dev_attr_power1_ltr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(power_extra);
+
+static int fme_power_mgmt_init(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ struct device *hwmon;
+
+ dev_dbg(&pdev->dev, "FME Power Management Init.\n");
+
+ hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
+ "dfl_fme_power", feature,
+ &power_hwmon_chip_info,
+ power_extra_groups);
+ if (IS_ERR(hwmon)) {
+ dev_err(&pdev->dev, "Fail to register power hwmon\n");
+ return PTR_ERR(hwmon);
+ }
+
+ return 0;
+}
+
+static void fme_power_mgmt_uinit(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ dev_dbg(&pdev->dev, "FME Power Management UInit.\n");
+}
+
+static const struct dfl_feature_id fme_power_mgmt_id_table[] = {
+ {.id = FME_FEATURE_ID_POWER_MGMT,},
+ {0,}
+};
+
+static const struct dfl_feature_ops fme_power_mgmt_ops = {
+ .init = fme_power_mgmt_init,
+ .uinit = fme_power_mgmt_uinit,
+};
+
static struct dfl_feature_driver fme_feature_drvs[] = {
{
.id_table = fme_hdr_id_table,
@@ -439,6 +682,10 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
.ops = &fme_thermal_mgmt_ops,
},
{
+ .id_table = fme_power_mgmt_id_table,
+ .ops = &fme_power_mgmt_ops,
+ },
+ {
.ops = NULL,
},
};
--
1.8.3.1
On Mon, Apr 29, 2019 at 4:13 AM Wu Hao <[email protected]> wrote:
+ hwmon folks
>
> This patch adds support for power management private feature under
> FPGA Management Engine (FME). This private feature driver registers
> a hwmon for power (power1_input), thresholds information, e.g.
> (power1_cap / crit) and also read-only sysfs interfaces for other
> power management information. For configuration, user could write
> threshold values via above power1_cap / crit sysfs interface
> under hwmon too.
>
> Signed-off-by: Luwei Kang <[email protected]>
> Signed-off-by: Xu Yilun <[email protected]>
> Signed-off-by: Wu Hao <[email protected]>
> ---
> v2: create a dfl_fme_power hwmon to expose power sysfs interfaces.
> move all sysfs interfaces under hwmon
> consumed --> hwmon power1_input
> threshold1 --> hwmon power1_cap
> threshold2 --> hwmon power1_crit
> threshold1_status --> hwmon power1_cap_status
> threshold2_status --> hwmon power1_crit_status
> xeon_limit --> hwmon power1_xeon_limit
> fpga_limit --> hwmon power1_fpga_limit
> ltr --> hwmon power1_ltr
> ---
> Documentation/ABI/testing/sysfs-platform-dfl-fme | 67 ++++++
> drivers/fpga/dfl-fme-main.c | 247 +++++++++++++++++++++++
> 2 files changed, 314 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> index dfbd315..e2ba92d 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> @@ -52,6 +52,7 @@ Contact: Wu Hao <[email protected]>
> Description: Read-Only. Read this file to get the name of hwmon device, it
> supports values:
> 'dfl_fme_thermal' - thermal hwmon device name
> + 'dfl_fme_power' - power hwmon device name
>
> What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
> Date: April 2019
> @@ -108,3 +109,69 @@ Description: Read-Only. Read this file to get the policy of hardware threshold1
> (see 'temp1_alarm'). It only supports two values (policies):
> 0 - AP2 state (90% throttling)
> 1 - AP1 state (50% throttling)
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-Only. It returns current FPGA power consumption in uW.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-Write. Read this file to get current hardware power
> + threshold1 in uW. If power consumption rises at or above
> + this threshold, hardware starts 50% throttling.
> + Write this file to set current hardware power threshold1 in uW.
> + As hardware only accepts values in Watts, so input value will
> + be round down per Watts (< 1 watts part will be discarded).
> + Write fails with -EINVAL if input parsing fails or input isn't
> + in the valid range (0 - 127000000 uW).
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-Write. Read this file to get current hardware power
> + threshold2 in uW. If power consumption rises at or above
> + this threshold, hardware starts 90% throttling.
> + Write this file to set current hardware power threshold2 in uW.
> + As hardware only accepts values in Watts, so input value will
> + be round down per Watts (< 1 watts part will be discarded).
> + Write fails with -EINVAL if input parsing fails or input isn't
> + in the valid range (0 - 127000000 uW).
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap_status
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-only. It returns 1 if power consumption is currently at or
> + above hardware threshold1 (see 'power1_cap'), otherwise 0.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_status
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-only. It returns 1 if power consumption is currently at or
> + above hardware threshold2 (see 'power1_crit'), otherwise 0.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-Only. It returns power limit for XEON in uW.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-Only. It returns power limit for FPGA in uW.
> +
> +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Wu Hao <[email protected]>
> +Description: Read-only. Read this file to get current Latency Tolerance
> + Reporting (ltr) value. This ltr impacts the CPU low power
> + state in integrated solution.
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index b9a68b8..7005316 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -425,6 +425,249 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> .uinit = fme_thermal_mgmt_uinit,
> };
>
> +#define FME_PWR_STATUS 0x8
> +#define FME_LATENCY_TOLERANCE BIT_ULL(18)
> +#define PWR_CONSUMED GENMASK_ULL(17, 0)
> +
> +#define FME_PWR_THRESHOLD 0x10
> +#define PWR_THRESHOLD1 GENMASK_ULL(6, 0) /* in Watts */
> +#define PWR_THRESHOLD2 GENMASK_ULL(14, 8) /* in Watts */
> +#define PWR_THRESHOLD_MAX 0x7f /* in Watts */
> +#define PWR_THRESHOLD1_STATUS BIT_ULL(16)
> +#define PWR_THRESHOLD2_STATUS BIT_ULL(17)
> +
> +#define FME_PWR_XEON_LIMIT 0x18
> +#define XEON_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
> +#define XEON_PWR_EN BIT_ULL(15)
> +#define FME_PWR_FPGA_LIMIT 0x20
> +#define FPGA_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
> +#define FPGA_PWR_EN BIT_ULL(15)
> +
> +#define PWR_THRESHOLD_MAX_IN_UW (PWR_THRESHOLD_MAX * 1000000)
> +
> +static int power_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + switch (attr) {
> + case hwmon_power_input:
> + v = readq(feature->ioaddr + FME_PWR_STATUS);
> + *val = (long)(FIELD_GET(PWR_CONSUMED, v) * 1000000);
> + break;
> + case hwmon_power_cap:
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> + *val = (long)(FIELD_GET(PWR_THRESHOLD1, v) * 1000000);
> + break;
> + case hwmon_power_crit:
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> + *val = (long)(FIELD_GET(PWR_THRESHOLD2, v) * 1000000);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int power_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct dfl_feature_platform_data *pdata = dev_get_platdata(dev->parent);
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + int ret = 0;
> + u64 v;
> +
> + if (val < 0 || val > PWR_THRESHOLD_MAX_IN_UW)
> + return -EINVAL;
> +
> + val = val / 1000000;
> +
> + mutex_lock(&pdata->lock);
> +
> + switch (attr) {
> + case hwmon_power_cap:
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> + v &= ~PWR_THRESHOLD1;
> + v |= FIELD_PREP(PWR_THRESHOLD1, val);
> + writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> + break;
> + case hwmon_power_crit:
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> + v &= ~PWR_THRESHOLD2;
> + v |= FIELD_PREP(PWR_THRESHOLD2, val);
> + writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> + break;
> + default:
> + ret = -EOPNOTSUPP;
> + break;
> + }
> +
> + mutex_unlock(&pdata->lock);
> +
> + return ret;
> +}
> +
> +static umode_t power_hwmon_attrs_visible(const void *drvdata,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_power_input:
> + return 0444;
> + case hwmon_power_cap:
> + case hwmon_power_crit:
> + return 0644;
> + }
> +
> + return 0;
> +}
> +
> +static const u32 power_hwmon_config[] = {
> + HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CRIT,
> + 0
> +};
> +
> +static const struct hwmon_channel_info hwmon_pwr_info = {
> + .type = hwmon_power,
> + .config = power_hwmon_config,
> +};
> +
> +static const struct hwmon_channel_info *power_hwmon_info[] = {
> + &hwmon_pwr_info,
> + NULL
> +};
> +
> +static const struct hwmon_ops power_hwmon_ops = {
> + .is_visible = power_hwmon_attrs_visible,
> + .read = power_hwmon_read,
> + .write = power_hwmon_write,
> +};
> +
> +static const struct hwmon_chip_info power_hwmon_chip_info = {
> + .ops = &power_hwmon_ops,
> + .info = power_hwmon_info,
> +};
> +
> +static ssize_t power1_cap_status_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(PWR_THRESHOLD1_STATUS, v));
> +}
> +
> +static ssize_t power1_crit_status_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(PWR_THRESHOLD2_STATUS, v));
> +}
> +
> +static ssize_t power1_xeon_limit_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u16 xeon_limit = 0;
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_PWR_XEON_LIMIT);
> +
> + if (FIELD_GET(XEON_PWR_EN, v))
> + xeon_limit = FIELD_GET(XEON_PWR_LIMIT, v);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n", xeon_limit * 100000);
> +}
> +
> +static ssize_t power1_fpga_limit_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u16 fpga_limit = 0;
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_PWR_FPGA_LIMIT);
> +
> + if (FIELD_GET(FPGA_PWR_EN, v))
> + fpga_limit = FIELD_GET(FPGA_PWR_LIMIT, v);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n", fpga_limit * 100000);
> +}
> +
> +static ssize_t power1_ltr_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_feature *feature = dev_get_drvdata(dev);
> + u64 v;
> +
> + v = readq(feature->ioaddr + FME_PWR_STATUS);
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n",
> + (unsigned int)FIELD_GET(FME_LATENCY_TOLERANCE, v));
> +}
> +
> +static DEVICE_ATTR_RO(power1_cap_status);
> +static DEVICE_ATTR_RO(power1_crit_status);
> +static DEVICE_ATTR_RO(power1_xeon_limit);
> +static DEVICE_ATTR_RO(power1_fpga_limit);
> +static DEVICE_ATTR_RO(power1_ltr);
> +
> +static struct attribute *power_extra_attrs[] = {
> + &dev_attr_power1_cap_status.attr,
> + &dev_attr_power1_crit_status.attr,
> + &dev_attr_power1_xeon_limit.attr,
> + &dev_attr_power1_fpga_limit.attr,
> + &dev_attr_power1_ltr.attr,
> + NULL
> +};
> +
> +ATTRIBUTE_GROUPS(power_extra);
> +
> +static int fme_power_mgmt_init(struct platform_device *pdev,
> + struct dfl_feature *feature)
> +{
> + struct device *hwmon;
> +
> + dev_dbg(&pdev->dev, "FME Power Management Init.\n");
> +
> + hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
> + "dfl_fme_power", feature,
> + &power_hwmon_chip_info,
> + power_extra_groups);
> + if (IS_ERR(hwmon)) {
> + dev_err(&pdev->dev, "Fail to register power hwmon\n");
> + return PTR_ERR(hwmon);
> + }
> +
> + return 0;
> +}
> +
> +static void fme_power_mgmt_uinit(struct platform_device *pdev,
> + struct dfl_feature *feature)
> +{
> + dev_dbg(&pdev->dev, "FME Power Management UInit.\n");
> +}
> +
> +static const struct dfl_feature_id fme_power_mgmt_id_table[] = {
> + {.id = FME_FEATURE_ID_POWER_MGMT,},
> + {0,}
> +};
> +
> +static const struct dfl_feature_ops fme_power_mgmt_ops = {
> + .init = fme_power_mgmt_init,
> + .uinit = fme_power_mgmt_uinit,
> +};
> +
> static struct dfl_feature_driver fme_feature_drvs[] = {
> {
> .id_table = fme_hdr_id_table,
> @@ -439,6 +682,10 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> .ops = &fme_thermal_mgmt_ops,
> },
> {
> + .id_table = fme_power_mgmt_id_table,
> + .ops = &fme_power_mgmt_ops,
> + },
> + {
> .ops = NULL,
> },
> };
> --
> 1.8.3.1
>
On Tue, May 07, 2019 at 01:23:33PM -0500, Alan Tull wrote:
> On Mon, Apr 29, 2019 at 4:13 AM Wu Hao <[email protected]> wrote:
>
> + hwmon folks
>
> >
> > This patch adds support for power management private feature under
> > FPGA Management Engine (FME). This private feature driver registers
> > a hwmon for power (power1_input), thresholds information, e.g.
> > (power1_cap / crit) and also read-only sysfs interfaces for other
> > power management information. For configuration, user could write
> > threshold values via above power1_cap / crit sysfs interface
> > under hwmon too.
> >
> > Signed-off-by: Luwei Kang <[email protected]>
> > Signed-off-by: Xu Yilun <[email protected]>
> > Signed-off-by: Wu Hao <[email protected]>
> > ---
> > v2: create a dfl_fme_power hwmon to expose power sysfs interfaces.
> > move all sysfs interfaces under hwmon
> > consumed --> hwmon power1_input
> > threshold1 --> hwmon power1_cap
> > threshold2 --> hwmon power1_crit
> > threshold1_status --> hwmon power1_cap_status
> > threshold2_status --> hwmon power1_crit_status
> > xeon_limit --> hwmon power1_xeon_limit
> > fpga_limit --> hwmon power1_fpga_limit
> > ltr --> hwmon power1_ltr
Same response as before.
Guenter
> > ---
> > Documentation/ABI/testing/sysfs-platform-dfl-fme | 67 ++++++
> > drivers/fpga/dfl-fme-main.c | 247 +++++++++++++++++++++++
> > 2 files changed, 314 insertions(+)
> >
> > diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > index dfbd315..e2ba92d 100644
> > --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > @@ -52,6 +52,7 @@ Contact: Wu Hao <[email protected]>
> > Description: Read-Only. Read this file to get the name of hwmon device, it
> > supports values:
> > 'dfl_fme_thermal' - thermal hwmon device name
> > + 'dfl_fme_power' - power hwmon device name
> >
> > What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
> > Date: April 2019
> > @@ -108,3 +109,69 @@ Description: Read-Only. Read this file to get the policy of hardware threshold1
> > (see 'temp1_alarm'). It only supports two values (policies):
> > 0 - AP2 state (90% throttling)
> > 1 - AP1 state (50% throttling)
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-Only. It returns current FPGA power consumption in uW.
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-Write. Read this file to get current hardware power
> > + threshold1 in uW. If power consumption rises at or above
> > + this threshold, hardware starts 50% throttling.
> > + Write this file to set current hardware power threshold1 in uW.
> > + As hardware only accepts values in Watts, so input value will
> > + be round down per Watts (< 1 watts part will be discarded).
> > + Write fails with -EINVAL if input parsing fails or input isn't
> > + in the valid range (0 - 127000000 uW).
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-Write. Read this file to get current hardware power
> > + threshold2 in uW. If power consumption rises at or above
> > + this threshold, hardware starts 90% throttling.
> > + Write this file to set current hardware power threshold2 in uW.
> > + As hardware only accepts values in Watts, so input value will
> > + be round down per Watts (< 1 watts part will be discarded).
> > + Write fails with -EINVAL if input parsing fails or input isn't
> > + in the valid range (0 - 127000000 uW).
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_cap_status
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-only. It returns 1 if power consumption is currently at or
> > + above hardware threshold1 (see 'power1_cap'), otherwise 0.
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_status
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-only. It returns 1 if power consumption is currently at or
> > + above hardware threshold2 (see 'power1_crit'), otherwise 0.
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-Only. It returns power limit for XEON in uW.
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-Only. It returns power limit for FPGA in uW.
> > +
> > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
> > +Date: April 2019
> > +KernelVersion: 5.2
> > +Contact: Wu Hao <[email protected]>
> > +Description: Read-only. Read this file to get current Latency Tolerance
> > + Reporting (ltr) value. This ltr impacts the CPU low power
> > + state in integrated solution.
> > diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> > index b9a68b8..7005316 100644
> > --- a/drivers/fpga/dfl-fme-main.c
> > +++ b/drivers/fpga/dfl-fme-main.c
> > @@ -425,6 +425,249 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> > .uinit = fme_thermal_mgmt_uinit,
> > };
> >
> > +#define FME_PWR_STATUS 0x8
> > +#define FME_LATENCY_TOLERANCE BIT_ULL(18)
> > +#define PWR_CONSUMED GENMASK_ULL(17, 0)
> > +
> > +#define FME_PWR_THRESHOLD 0x10
> > +#define PWR_THRESHOLD1 GENMASK_ULL(6, 0) /* in Watts */
> > +#define PWR_THRESHOLD2 GENMASK_ULL(14, 8) /* in Watts */
> > +#define PWR_THRESHOLD_MAX 0x7f /* in Watts */
> > +#define PWR_THRESHOLD1_STATUS BIT_ULL(16)
> > +#define PWR_THRESHOLD2_STATUS BIT_ULL(17)
> > +
> > +#define FME_PWR_XEON_LIMIT 0x18
> > +#define XEON_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
> > +#define XEON_PWR_EN BIT_ULL(15)
> > +#define FME_PWR_FPGA_LIMIT 0x20
> > +#define FPGA_PWR_LIMIT GENMASK_ULL(14, 0) /* in 0.1 Watts */
> > +#define FPGA_PWR_EN BIT_ULL(15)
> > +
> > +#define PWR_THRESHOLD_MAX_IN_UW (PWR_THRESHOLD_MAX * 1000000)
> > +
> > +static int power_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> > + u32 attr, int channel, long *val)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u64 v;
> > +
> > + switch (attr) {
> > + case hwmon_power_input:
> > + v = readq(feature->ioaddr + FME_PWR_STATUS);
> > + *val = (long)(FIELD_GET(PWR_CONSUMED, v) * 1000000);
> > + break;
> > + case hwmon_power_cap:
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > + *val = (long)(FIELD_GET(PWR_THRESHOLD1, v) * 1000000);
> > + break;
> > + case hwmon_power_crit:
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > + *val = (long)(FIELD_GET(PWR_THRESHOLD2, v) * 1000000);
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int power_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> > + u32 attr, int channel, long val)
> > +{
> > + struct dfl_feature_platform_data *pdata = dev_get_platdata(dev->parent);
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + int ret = 0;
> > + u64 v;
> > +
> > + if (val < 0 || val > PWR_THRESHOLD_MAX_IN_UW)
> > + return -EINVAL;
> > +
> > + val = val / 1000000;
> > +
> > + mutex_lock(&pdata->lock);
> > +
> > + switch (attr) {
> > + case hwmon_power_cap:
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > + v &= ~PWR_THRESHOLD1;
> > + v |= FIELD_PREP(PWR_THRESHOLD1, val);
> > + writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> > + break;
> > + case hwmon_power_crit:
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > + v &= ~PWR_THRESHOLD2;
> > + v |= FIELD_PREP(PWR_THRESHOLD2, val);
> > + writeq(v, feature->ioaddr + FME_PWR_THRESHOLD);
> > + break;
> > + default:
> > + ret = -EOPNOTSUPP;
> > + break;
> > + }
> > +
> > + mutex_unlock(&pdata->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static umode_t power_hwmon_attrs_visible(const void *drvdata,
> > + enum hwmon_sensor_types type,
> > + u32 attr, int channel)
> > +{
> > + switch (attr) {
> > + case hwmon_power_input:
> > + return 0444;
> > + case hwmon_power_cap:
> > + case hwmon_power_crit:
> > + return 0644;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const u32 power_hwmon_config[] = {
> > + HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CRIT,
> > + 0
> > +};
> > +
> > +static const struct hwmon_channel_info hwmon_pwr_info = {
> > + .type = hwmon_power,
> > + .config = power_hwmon_config,
> > +};
> > +
> > +static const struct hwmon_channel_info *power_hwmon_info[] = {
> > + &hwmon_pwr_info,
> > + NULL
> > +};
> > +
> > +static const struct hwmon_ops power_hwmon_ops = {
> > + .is_visible = power_hwmon_attrs_visible,
> > + .read = power_hwmon_read,
> > + .write = power_hwmon_write,
> > +};
> > +
> > +static const struct hwmon_chip_info power_hwmon_chip_info = {
> > + .ops = &power_hwmon_ops,
> > + .info = power_hwmon_info,
> > +};
> > +
> > +static ssize_t power1_cap_status_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u64 v;
> > +
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > + (unsigned int)FIELD_GET(PWR_THRESHOLD1_STATUS, v));
> > +}
> > +
> > +static ssize_t power1_crit_status_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u64 v;
> > +
> > + v = readq(feature->ioaddr + FME_PWR_THRESHOLD);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > + (unsigned int)FIELD_GET(PWR_THRESHOLD2_STATUS, v));
> > +}
> > +
> > +static ssize_t power1_xeon_limit_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u16 xeon_limit = 0;
> > + u64 v;
> > +
> > + v = readq(feature->ioaddr + FME_PWR_XEON_LIMIT);
> > +
> > + if (FIELD_GET(XEON_PWR_EN, v))
> > + xeon_limit = FIELD_GET(XEON_PWR_LIMIT, v);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n", xeon_limit * 100000);
> > +}
> > +
> > +static ssize_t power1_fpga_limit_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u16 fpga_limit = 0;
> > + u64 v;
> > +
> > + v = readq(feature->ioaddr + FME_PWR_FPGA_LIMIT);
> > +
> > + if (FIELD_GET(FPGA_PWR_EN, v))
> > + fpga_limit = FIELD_GET(FPGA_PWR_LIMIT, v);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n", fpga_limit * 100000);
> > +}
> > +
> > +static ssize_t power1_ltr_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > + u64 v;
> > +
> > + v = readq(feature->ioaddr + FME_PWR_STATUS);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > + (unsigned int)FIELD_GET(FME_LATENCY_TOLERANCE, v));
> > +}
> > +
> > +static DEVICE_ATTR_RO(power1_cap_status);
> > +static DEVICE_ATTR_RO(power1_crit_status);
> > +static DEVICE_ATTR_RO(power1_xeon_limit);
> > +static DEVICE_ATTR_RO(power1_fpga_limit);
> > +static DEVICE_ATTR_RO(power1_ltr);
> > +
> > +static struct attribute *power_extra_attrs[] = {
> > + &dev_attr_power1_cap_status.attr,
> > + &dev_attr_power1_crit_status.attr,
> > + &dev_attr_power1_xeon_limit.attr,
> > + &dev_attr_power1_fpga_limit.attr,
> > + &dev_attr_power1_ltr.attr,
> > + NULL
> > +};
> > +
> > +ATTRIBUTE_GROUPS(power_extra);
> > +
> > +static int fme_power_mgmt_init(struct platform_device *pdev,
> > + struct dfl_feature *feature)
> > +{
> > + struct device *hwmon;
> > +
> > + dev_dbg(&pdev->dev, "FME Power Management Init.\n");
> > +
> > + hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
> > + "dfl_fme_power", feature,
> > + &power_hwmon_chip_info,
> > + power_extra_groups);
> > + if (IS_ERR(hwmon)) {
> > + dev_err(&pdev->dev, "Fail to register power hwmon\n");
> > + return PTR_ERR(hwmon);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void fme_power_mgmt_uinit(struct platform_device *pdev,
> > + struct dfl_feature *feature)
> > +{
> > + dev_dbg(&pdev->dev, "FME Power Management UInit.\n");
> > +}
> > +
> > +static const struct dfl_feature_id fme_power_mgmt_id_table[] = {
> > + {.id = FME_FEATURE_ID_POWER_MGMT,},
> > + {0,}
> > +};
> > +
> > +static const struct dfl_feature_ops fme_power_mgmt_ops = {
> > + .init = fme_power_mgmt_init,
> > + .uinit = fme_power_mgmt_uinit,
> > +};
> > +
> > static struct dfl_feature_driver fme_feature_drvs[] = {
> > {
> > .id_table = fme_hdr_id_table,
> > @@ -439,6 +682,10 @@ static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> > .ops = &fme_thermal_mgmt_ops,
> > },
> > {
> > + .id_table = fme_power_mgmt_id_table,
> > + .ops = &fme_power_mgmt_ops,
> > + },
> > + {
> > .ops = NULL,
> > },
> > };
> > --
> > 1.8.3.1
> >