[Adding Sam, who is helping to review/collect panel-simple patches]
On Tue, May 7, 2019 at 12:27 PM Sébastien Szymanski
<[email protected]> wrote:
>
> This patch adds support for the Armadeus ST0700 Adapt. It comes with a
> Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
> that it can be connected on the TFT header of Armadeus Dev boards.
>
> Cc: [email protected] # v4.19
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Sébastien Szymanski <[email protected]>
> ---
> .../display/panel/armadeus,st0700-adapt.txt | 9 ++++++
> drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++
> 2 files changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
> new file mode 100644
> index 000000000000..a30d63db3c8f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
> @@ -0,0 +1,9 @@
> +Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with
> +an adapter board.
> +
> +Required properties:
> +- compatible: "armadeus,st0700-adapt"
> +- power-supply: see panel-common.txt
> +
> +Optional properties:
> +- backlight: see panel-common.txt
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 9e8218f6a3f2..45ca8d10b66f 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -446,6 +446,32 @@ static const struct panel_desc ampire_am800480r3tmqwa1h = {
> .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> };
>
> +static const struct display_timing santek_st0700i5y_rbslw_f_timing = {
> + .pixelclock = { 26400000, 33300000, 46800000 },
> + .hactive = { 800, 800, 800 },
> + .hfront_porch = { 16, 210, 354 },
> + .hback_porch = { 45, 36, 6 },
> + .hsync_len = { 1, 10, 40 },
> + .vactive = { 480, 480, 480 },
> + .vfront_porch = { 7, 22, 147 },
> + .vback_porch = { 22, 13, 3 },
> + .vsync_len = { 1, 10, 20 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
> + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE
> +};
> +
> +static const struct panel_desc armadeus_st0700_adapt = {
> + .timings = &santek_st0700i5y_rbslw_f_timing,
> + .num_timings = 1,
> + .bpc = 6,
> + .size = {
> + .width = 154,
> + .height = 86,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
> +};
> +
> static const struct drm_display_mode auo_b101aw03_mode = {
> .clock = 51450,
> .hdisplay = 1024,
> @@ -2544,6 +2570,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "arm,rtsm-display",
> .data = &arm_rtsm,
> + }, {
> + .compatible = "armadeus,st0700-adapt",
> + .data = &armadeus_st0700_adapt,
> }, {
> .compatible = "auo,b101aw03",
> .data = &auo_b101aw03,
> --
> 2.19.2
>
Hi Fabio
On Tue, May 07, 2019 at 12:33:39PM -0300, Fabio Estevam wrote:
> [Adding Sam, who is helping to review/collect panel-simple patches]
>
> On Tue, May 7, 2019 at 12:27 PM S?bastien Szymanski
> <[email protected]> wrote:
> >
> > This patch adds support for the Armadeus ST0700 Adapt. It comes with a
> > Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
> > that it can be connected on the TFT header of Armadeus Dev boards.
> >
> > Cc: [email protected] # v4.19
> > Reviewed-by: Rob Herring <[email protected]>
> > Signed-off-by: S?bastien Szymanski <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
If you wil lresend the patch I can apply it.
I have lost the original mail.
Sam
On Tue, May 07, 2019 at 06:19:50PM +0200, Sam Ravnborg wrote:
> Hi Fabio
>
> On Tue, May 07, 2019 at 12:33:39PM -0300, Fabio Estevam wrote:
> > [Adding Sam, who is helping to review/collect panel-simple patches]
> >
> > On Tue, May 7, 2019 at 12:27 PM S?bastien Szymanski
> > <[email protected]> wrote:
> > >
> > > This patch adds support for the Armadeus ST0700 Adapt. It comes with a
> > > Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
> > > that it can be connected on the TFT header of Armadeus Dev boards.
> > >
> > > Cc: [email protected] # v4.19
> > > Reviewed-by: Rob Herring <[email protected]>
> > > Signed-off-by: S?bastien Szymanski <[email protected]>
> Reviewed-by: Sam Ravnborg <[email protected]>
>
> If you wil lresend the patch I can apply it.
> I have lost the original mail.
Usually patchwork should have it already (and you can pipe the raw
patchwork mbox into dim apply), but somehow it's not there either.
Not sure why, sometimes this is because mails are stuck in moderation,
sometimes because people do interesting things with their mails (e.g. smtp
servers mangling formatting).
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
On Wed, May 08, 2019 at 10:33:03AM +0200, Daniel Vetter wrote:
> On Tue, May 07, 2019 at 06:19:50PM +0200, Sam Ravnborg wrote:
> > Hi Fabio
> >
> > On Tue, May 07, 2019 at 12:33:39PM -0300, Fabio Estevam wrote:
> > > [Adding Sam, who is helping to review/collect panel-simple patches]
> > >
> > > On Tue, May 7, 2019 at 12:27 PM S?bastien Szymanski
> > > <[email protected]> wrote:
> > > >
> > > > This patch adds support for the Armadeus ST0700 Adapt. It comes with a
> > > > Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
> > > > that it can be connected on the TFT header of Armadeus Dev boards.
> > > >
> > > > Cc: [email protected] # v4.19
> > > > Reviewed-by: Rob Herring <[email protected]>
> > > > Signed-off-by: S?bastien Szymanski <[email protected]>
> > Reviewed-by: Sam Ravnborg <[email protected]>
> >
> > If you wil lresend the patch I can apply it.
> > I have lost the original mail.
>
> Usually patchwork should have it already (and you can pipe the raw
> patchwork mbox into dim apply), but somehow it's not there either.
> Not sure why, sometimes this is because mails are stuck in moderation,
> sometimes because people do interesting things with their mails (e.g. smtp
> servers mangling formatting).
patchwork was just a bit slow, it's there now:
https://patchwork.freedesktop.org/series/60408/
Cheers, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Hello Sam,
On 5/8/19 11:06 AM, Daniel Vetter wrote:
> On Wed, May 08, 2019 at 10:33:03AM +0200, Daniel Vetter wrote:
>> On Tue, May 07, 2019 at 06:19:50PM +0200, Sam Ravnborg wrote:
>>> Hi Fabio
>>>
>>> On Tue, May 07, 2019 at 12:33:39PM -0300, Fabio Estevam wrote:
>>>> [Adding Sam, who is helping to review/collect panel-simple patches]
>>>>
>>>> On Tue, May 7, 2019 at 12:27 PM Sébastien Szymanski
>>>> <[email protected]> wrote:
>>>>>
>>>>> This patch adds support for the Armadeus ST0700 Adapt. It comes with a
>>>>> Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
>>>>> that it can be connected on the TFT header of Armadeus Dev boards.
>>>>>
>>>>> Cc: [email protected] # v4.19
>>>>> Reviewed-by: Rob Herring <[email protected]>
>>>>> Signed-off-by: Sébastien Szymanski <[email protected]>
>>> Reviewed-by: Sam Ravnborg <[email protected]>
>>>
>>> If you wil lresend the patch I can apply it.
>>> I have lost the original mail.
>>
>> Usually patchwork should have it already (and you can pipe the raw
>> patchwork mbox into dim apply), but somehow it's not there either.
>> Not sure why, sometimes this is because mails are stuck in moderation,
>> sometimes because people do interesting things with their mails (e.g. smtp
>> servers mangling formatting).
>
> patchwork was just a bit slow, it's there now:
>
> https://patchwork.freedesktop.org/series/60408/
>
Will you take the patch from patchwork or should I resent it ?
Regards,
> Cheers, Daniel
>
--
Sébastien Szymanski
Software engineer, Armadeus Systems
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9 72 28 79 26