When adding more MAC address to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.
So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index ac19bf62db70..9d3112beb19f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1018,6 +1018,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
mac->mac = &sun8i_dwmac_ops;
mac->dma = &sun8i_dwmac_dma_ops;
+ priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
/* The loopback bit seems to be re-set when link change
* Simply mask it each time
* Speed 10/100/1000 are set in BIT(2)/BIT(3)
--
2.21.0
Hello!
On 05/13/2019 04:06 PM, Corentin Labbe wrote:
> When adding more MAC address to a dwmac-sun8i interface, the device goes
Addresses?
> directly in promiscuous mode.
> This is due to IFF_UNICAST_FLT missing flag.
>
> So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
>
> Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
> Signed-off-by: Corentin Labbe <[email protected]>
[...]
MBR, Sergei
From: Corentin Labbe <[email protected]>
Date: Mon, 13 May 2019 13:06:39 +0000
> When adding more MAC address to a dwmac-sun8i interface, the device goes
> directly in promiscuous mode.
> This is due to IFF_UNICAST_FLT missing flag.
>
> So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
>
> Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
> Signed-off-by: Corentin Labbe <[email protected]>
Applied with s/address/addresses/
Thanks.