2019-05-12 10:11:39

by Anson Huang

[permalink] [raw]
Subject: [PATCH RESEND V4 1/3] dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU

i.MX system controller watchdog depends on SCU driver to support
interrupt function, so it needs to be subnode of SCU node in DT,
binding doc should be moved to fsl,scu.txt as well.

Signed-off-by: Anson Huang <[email protected]>
---
No change, just resend patch with correct encoding.
---
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++
.../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ----------------------
2 files changed, 15 insertions(+), 24 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 5d7dbab..1b56557 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -133,6 +133,16 @@ RTC bindings based on SCU Message Protocol
Required properties:
- compatible: should be "fsl,imx8qxp-sc-rtc";

+Watchdog bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible: should be:
+ "fsl,imx8qxp-sc-wdt"
+ followed by "fsl,imx-sc-wdt";
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
Example (imx8qxp):
-------------
aliases {
@@ -185,6 +195,11 @@ firmware {
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};
};

diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
deleted file mode 100644
index 02b87e9..0000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Freescale i.MX System Controller Watchdog
-
-i.MX system controller watchdog is for i.MX SoCs with system controller inside,
-the watchdog is managed by system controller, users can ONLY communicate with
-system controller from secure mode for watchdog operations, so Linux i.MX system
-controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware
-for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and
-it will request system controller to execute the watchdog operation passed from
-Linux kernel.
-
-Required properties:
-- compatible: Should be :
- "fsl,imx8qxp-sc-wdt"
- followed by "fsl,imx-sc-wdt";
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds.
-
-Examples:
-
-watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
-};
--
2.7.4


2019-05-12 10:11:44

by Anson Huang

[permalink] [raw]
Subject: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

i.MX system controller watchdog has pretimeout function which
depends on i.MX SCU driver, so it should be a subnode of SCU.

Signed-off-by: Anson Huang <[email protected]>
---
No change, just resend patch with correct encoding.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0683ee2..b17c22e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -149,6 +149,11 @@
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};

timer {
@@ -517,9 +522,4 @@
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
-
- watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
- };
};
--
2.7.4

2019-05-12 10:12:53

by Anson Huang

[permalink] [raw]
Subject: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

i.MX system controller watchdog can support pretimeout IRQ
via general SCU MU IRQ, it depends on IMX_SCU and driver MUST
be probed after SCU IPC ready, then enable corresponding SCU
IRQ group and register SCU IRQ notifier, when watchdog pretimeout
IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout
notifier will be called to handle the event.

Signed-off-by: Anson Huang <[email protected]>
---
No change, just resend patch with correct encoding.
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/imx_sc_wdt.c | 116 +++++++++++++++++++++++++++++++++++-------
2 files changed, 98 insertions(+), 19 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7ea6037..e08238c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -716,6 +716,7 @@ config IMX2_WDT
config IMX_SC_WDT
tristate "IMX SC Watchdog"
depends on HAVE_ARM_SMCCC
+ depends on IMX_SCU
select WATCHDOG_CORE
help
This is the driver for the system controller watchdog
diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
index 49848b6..6ecc03f 100644
--- a/drivers/watchdog/imx_sc_wdt.c
+++ b/drivers/watchdog/imx_sc_wdt.c
@@ -4,6 +4,7 @@
*/

#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sci.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -33,11 +34,19 @@

#define SC_TIMER_WDOG_ACTION_PARTITION 0

+#define SC_IRQ_WDOG 1
+#define SC_IRQ_GROUP_WDOG 1
+
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0000);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

+struct imx_sc_wdt_device {
+ struct watchdog_device wdd;
+ struct notifier_block wdt_notifier;
+};
+
static int imx_sc_wdt_ping(struct watchdog_device *wdog)
{
struct arm_smccc_res res;
@@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
return res.a0 ? -EACCES : 0;
}

+static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
+ unsigned int pretimeout)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_PRETIME_WDOG,
+ pretimeout * 1000, 0, 0, 0, 0, 0, &res);
+ if (res.a0)
+ return -EACCES;
+
+ wdog->pretimeout = pretimeout;
+
+ return 0;
+}
+
+static int imx_sc_wdt_notify(struct notifier_block *nb,
+ unsigned long event, void *group)
+{
+ struct imx_sc_wdt_device *imx_sc_wdd =
+ container_of(nb,
+ struct imx_sc_wdt_device,
+ wdt_notifier);
+
+ if (event & SC_IRQ_WDOG &&
+ *(u8 *)group == SC_IRQ_GROUP_WDOG)
+ watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
+
+ return 0;
+}
+
+static void imx_sc_wdt_action(void *data)
+{
+ struct notifier_block *wdt_notifier = data;
+
+ imx_scu_irq_unregister_notifier(wdt_notifier);
+ imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ false);
+}
+
static const struct watchdog_ops imx_sc_wdt_ops = {
.owner = THIS_MODULE,
.start = imx_sc_wdt_start,
.stop = imx_sc_wdt_stop,
.ping = imx_sc_wdt_ping,
.set_timeout = imx_sc_wdt_set_timeout,
+ .set_pretimeout = imx_sc_wdt_set_pretimeout,
};

-static const struct watchdog_info imx_sc_wdt_info = {
+static struct watchdog_info imx_sc_wdt_info = {
.identity = "i.MX SC watchdog timer",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
+ WDIOF_MAGICCLOSE,
};

static int imx_sc_wdt_probe(struct platform_device *pdev)
{
+ struct imx_sc_wdt_device *imx_sc_wdd;
+ struct watchdog_device *wdog;
struct device *dev = &pdev->dev;
- struct watchdog_device *imx_sc_wdd;
int ret;

imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
@@ -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, imx_sc_wdd);

- imx_sc_wdd->info = &imx_sc_wdt_info;
- imx_sc_wdd->ops = &imx_sc_wdt_ops;
- imx_sc_wdd->min_timeout = 1;
- imx_sc_wdd->max_timeout = MAX_TIMEOUT;
- imx_sc_wdd->parent = dev;
- imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
+ wdog = &imx_sc_wdd->wdd;
+ wdog->info = &imx_sc_wdt_info;
+ wdog->ops = &imx_sc_wdt_ops;
+ wdog->min_timeout = 1;
+ wdog->max_timeout = MAX_TIMEOUT;
+ wdog->parent = dev;
+ wdog->timeout = DEFAULT_TIMEOUT;

- watchdog_init_timeout(imx_sc_wdd, 0, dev);
- watchdog_stop_on_reboot(imx_sc_wdd);
- watchdog_stop_on_unregister(imx_sc_wdd);
+ watchdog_init_timeout(wdog, 0, dev);
+ watchdog_stop_on_reboot(wdog);
+ watchdog_stop_on_unregister(wdog);

- ret = devm_watchdog_register_device(dev, imx_sc_wdd);
+ ret = devm_watchdog_register_device(dev, wdog);
if (ret) {
dev_err(dev, "Failed to register watchdog device\n");
return ret;
}

+ ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ true);
+ if (ret) {
+ dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
+ return 0;
+ }
+
+ imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
+ ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
+ if (ret) {
+ imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ false);
+ dev_warn(dev,
+ "Register irq notifier failed, pretimeout NOT supported\n");
+ return 0;
+ }
+
+ ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
+ &imx_sc_wdd->wdt_notifier);
+ if (!ret)
+ imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
+ else
+ dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
+
return 0;
}

static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
{
- struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+ struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);

- if (watchdog_active(imx_sc_wdd))
- imx_sc_wdt_stop(imx_sc_wdd);
+ if (watchdog_active(&imx_sc_wdd->wdd))
+ imx_sc_wdt_stop(&imx_sc_wdd->wdd);

return 0;
}

static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
{
- struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+ struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);

- if (watchdog_active(imx_sc_wdd))
- imx_sc_wdt_start(imx_sc_wdd);
+ if (watchdog_active(&imx_sc_wdd->wdd))
+ imx_sc_wdt_start(&imx_sc_wdd->wdd);

return 0;
}
--
2.7.4

2019-05-12 13:29:29

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

On 5/12/19 3:10 AM, Anson Huang wrote:
> i.MX system controller watchdog can support pretimeout IRQ
> via general SCU MU IRQ, it depends on IMX_SCU and driver MUST
> be probed after SCU IPC ready, then enable corresponding SCU
> IRQ group and register SCU IRQ notifier, when watchdog pretimeout
> IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout
> notifier will be called to handle the event.
>
> Signed-off-by: Anson Huang <[email protected]>

Revviewed-by: Guenter Roeck <[email protected]>

Other patches waiting for DT review. IMX API feedback below.

Side note: This patch depends on 'firmware: imx: enable
imx scu general irq function' which is not yet in mainline.

> ---
> No change, just resend patch with correct encoding.
> ---
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/imx_sc_wdt.c | 116 +++++++++++++++++++++++++++++++++++-------
> 2 files changed, 98 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7ea6037..e08238c 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -716,6 +716,7 @@ config IMX2_WDT
> config IMX_SC_WDT
> tristate "IMX SC Watchdog"
> depends on HAVE_ARM_SMCCC
> + depends on IMX_SCU
> select WATCHDOG_CORE
> help
> This is the driver for the system controller watchdog
> diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
> index 49848b6..6ecc03f 100644
> --- a/drivers/watchdog/imx_sc_wdt.c
> +++ b/drivers/watchdog/imx_sc_wdt.c
> @@ -4,6 +4,7 @@
> */
>
> #include <linux/arm-smccc.h>
> +#include <linux/firmware/imx/sci.h>
> #include <linux/io.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> @@ -33,11 +34,19 @@
>
> #define SC_TIMER_WDOG_ACTION_PARTITION 0
>
> +#define SC_IRQ_WDOG 1
> +#define SC_IRQ_GROUP_WDOG 1
> +
> static bool nowayout = WATCHDOG_NOWAYOUT;
> module_param(nowayout, bool, 0000);
> MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>
> +struct imx_sc_wdt_device {
> + struct watchdog_device wdd;
> + struct notifier_block wdt_notifier;
> +};
> +
> static int imx_sc_wdt_ping(struct watchdog_device *wdog)
> {
> struct arm_smccc_res res;
> @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
> return res.a0 ? -EACCES : 0;
> }
>
> +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
> + unsigned int pretimeout)
> +{
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_PRETIME_WDOG,
> + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
> + if (res.a0)
> + return -EACCES;
> +
> + wdog->pretimeout = pretimeout;
> +
> + return 0;
> +}
> +
> +static int imx_sc_wdt_notify(struct notifier_block *nb,
> + unsigned long event, void *group)
> +{
> + struct imx_sc_wdt_device *imx_sc_wdd =
> + container_of(nb,
> + struct imx_sc_wdt_device,
> + wdt_notifier);
> +
> + if (event & SC_IRQ_WDOG &&
> + *(u8 *)group == SC_IRQ_GROUP_WDOG)
> + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);

This should really not be necessary. Event mask and target group
(if needed with a wildcard for the group) should be parameters of
imx_scu_irq_register_notifier(), and be handled in the imx code.

Also, passing 'group' as pointed seems excessive. Might as well
pass it directly.

Guenter

> +
> + return 0;
> +}
> +
> +static void imx_sc_wdt_action(void *data)
> +{
> + struct notifier_block *wdt_notifier = data;
> +
> + imx_scu_irq_unregister_notifier(wdt_notifier);
> + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> + SC_IRQ_WDOG,
> + false);
> +}
> +
> static const struct watchdog_ops imx_sc_wdt_ops = {
> .owner = THIS_MODULE,
> .start = imx_sc_wdt_start,
> .stop = imx_sc_wdt_stop,
> .ping = imx_sc_wdt_ping,
> .set_timeout = imx_sc_wdt_set_timeout,
> + .set_pretimeout = imx_sc_wdt_set_pretimeout,
> };
>
> -static const struct watchdog_info imx_sc_wdt_info = {
> +static struct watchdog_info imx_sc_wdt_info = {
> .identity = "i.MX SC watchdog timer",
> .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
> + WDIOF_MAGICCLOSE,
> };
>
> static int imx_sc_wdt_probe(struct platform_device *pdev)
> {
> + struct imx_sc_wdt_device *imx_sc_wdd;
> + struct watchdog_device *wdog;
> struct device *dev = &pdev->dev;
> - struct watchdog_device *imx_sc_wdd;
> int ret;
>
> imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
> @@ -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, imx_sc_wdd);
>
> - imx_sc_wdd->info = &imx_sc_wdt_info;
> - imx_sc_wdd->ops = &imx_sc_wdt_ops;
> - imx_sc_wdd->min_timeout = 1;
> - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> - imx_sc_wdd->parent = dev;
> - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> + wdog = &imx_sc_wdd->wdd;
> + wdog->info = &imx_sc_wdt_info;
> + wdog->ops = &imx_sc_wdt_ops;
> + wdog->min_timeout = 1;
> + wdog->max_timeout = MAX_TIMEOUT;
> + wdog->parent = dev;
> + wdog->timeout = DEFAULT_TIMEOUT;
>
> - watchdog_init_timeout(imx_sc_wdd, 0, dev);
> - watchdog_stop_on_reboot(imx_sc_wdd);
> - watchdog_stop_on_unregister(imx_sc_wdd);
> + watchdog_init_timeout(wdog, 0, dev);
> + watchdog_stop_on_reboot(wdog);
> + watchdog_stop_on_unregister(wdog);
>
> - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
> + ret = devm_watchdog_register_device(dev, wdog);
> if (ret) {
> dev_err(dev, "Failed to register watchdog device\n");
> return ret;
> }
>
> + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> + SC_IRQ_WDOG,
> + true);
> + if (ret) {
> + dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
> + return 0;
> + }
> +
> + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
> + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
> + if (ret) {
> + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> + SC_IRQ_WDOG,
> + false);
> + dev_warn(dev,
> + "Register irq notifier failed, pretimeout NOT supported\n");
> + return 0;
> + }
> +
> + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
> + &imx_sc_wdd->wdt_notifier);
> + if (!ret)
> + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
> + else
> + dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
> +
> return 0;
> }
>
> static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
> {
> - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
>
> - if (watchdog_active(imx_sc_wdd))
> - imx_sc_wdt_stop(imx_sc_wdd);
> + if (watchdog_active(&imx_sc_wdd->wdd))
> + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
>
> return 0;
> }
>
> static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
> {
> - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
>
> - if (watchdog_active(imx_sc_wdd))
> - imx_sc_wdt_start(imx_sc_wdd);
> + if (watchdog_active(&imx_sc_wdd->wdd))
> + imx_sc_wdt_start(&imx_sc_wdd->wdd);
>
> return 0;
> }
>

2019-05-12 14:18:16

by Anson Huang

[permalink] [raw]
Subject: RE: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support



> -----Original Message-----
> From: Guenter Roeck [mailto:[email protected]] On Behalf Of Guenter
> Roeck
> Sent: Sunday, May 12, 2019 9:28 PM
> To: Anson Huang <[email protected]>; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> Aisheng Dong <[email protected]>; [email protected]; Daniel
> Baluta <[email protected]>; Peng Fan <[email protected]>;
> [email protected]; [email protected]; linux-
> [email protected]; [email protected]
> Cc: dl-linux-imx <[email protected]>
> Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
> support
>
> On 5/12/19 3:10 AM, Anson Huang wrote:
> > i.MX system controller watchdog can support pretimeout IRQ via general
> > SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU
> > IPC ready, then enable corresponding SCU IRQ group and register SCU
> > IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be
> > handled and watchdog pretimeout notifier will be called to handle the
> > event.
> >
> > Signed-off-by: Anson Huang <[email protected]>
>
> Revviewed-by: Guenter Roeck <[email protected]>
>
> Other patches waiting for DT review. IMX API feedback below.
>
> Side note: This patch depends on 'firmware: imx: enable imx scu general irq
> function' which is not yet in mainline.

Thanks Guenter.

The ''firmware: imx: enable imx scu general irq function' patch is already in shawn's imx/drivers
branch, should be in mainline after next merge window.

Anson.

>
> > ---
> > No change, just resend patch with correct encoding.
> > ---
> > drivers/watchdog/Kconfig | 1 +
> > drivers/watchdog/imx_sc_wdt.c | 116
> +++++++++++++++++++++++++++++++++++-------
> > 2 files changed, 98 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> > 7ea6037..e08238c 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -716,6 +716,7 @@ config IMX2_WDT
> > config IMX_SC_WDT
> > tristate "IMX SC Watchdog"
> > depends on HAVE_ARM_SMCCC
> > + depends on IMX_SCU
> > select WATCHDOG_CORE
> > help
> > This is the driver for the system controller watchdog diff --git
> > a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c index
> > 49848b6..6ecc03f 100644
> > --- a/drivers/watchdog/imx_sc_wdt.c
> > +++ b/drivers/watchdog/imx_sc_wdt.c
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <linux/arm-smccc.h>
> > +#include <linux/firmware/imx/sci.h>
> > #include <linux/io.h>
> > #include <linux/init.h>
> > #include <linux/kernel.h>
> > @@ -33,11 +34,19 @@
> >
> > #define SC_TIMER_WDOG_ACTION_PARTITION 0
> >
> > +#define SC_IRQ_WDOG 1
> > +#define SC_IRQ_GROUP_WDOG 1
> > +
> > static bool nowayout = WATCHDOG_NOWAYOUT;
> > module_param(nowayout, bool, 0000);
> > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once
> started (default="
> > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> >
> > +struct imx_sc_wdt_device {
> > + struct watchdog_device wdd;
> > + struct notifier_block wdt_notifier;
> > +};
> > +
> > static int imx_sc_wdt_ping(struct watchdog_device *wdog)
> > {
> > struct arm_smccc_res res;
> > @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct
> watchdog_device *wdog,
> > return res.a0 ? -EACCES : 0;
> > }
> >
> > +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
> > + unsigned int pretimeout)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER,
> IMX_SIP_TIMER_SET_PRETIME_WDOG,
> > + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
> > + if (res.a0)
> > + return -EACCES;
> > +
> > + wdog->pretimeout = pretimeout;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_sc_wdt_notify(struct notifier_block *nb,
> > + unsigned long event, void *group) {
> > + struct imx_sc_wdt_device *imx_sc_wdd =
> > + container_of(nb,
> > + struct imx_sc_wdt_device,
> > + wdt_notifier);
> > +
> > + if (event & SC_IRQ_WDOG &&
> > + *(u8 *)group == SC_IRQ_GROUP_WDOG)
> > + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
>
> This should really not be necessary. Event mask and target group (if needed
> with a wildcard for the group) should be parameters of
> imx_scu_irq_register_notifier(), and be handled in the imx code.
>
> Also, passing 'group' as pointed seems excessive. Might as well pass it
> directly.
>
> Guenter
>
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_sc_wdt_action(void *data) {
> > + struct notifier_block *wdt_notifier = data;
> > +
> > + imx_scu_irq_unregister_notifier(wdt_notifier);
> > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + false);
> > +}
> > +
> > static const struct watchdog_ops imx_sc_wdt_ops = {
> > .owner = THIS_MODULE,
> > .start = imx_sc_wdt_start,
> > .stop = imx_sc_wdt_stop,
> > .ping = imx_sc_wdt_ping,
> > .set_timeout = imx_sc_wdt_set_timeout,
> > + .set_pretimeout = imx_sc_wdt_set_pretimeout,
> > };
> >
> > -static const struct watchdog_info imx_sc_wdt_info = {
> > +static struct watchdog_info imx_sc_wdt_info = {
> > .identity = "i.MX SC watchdog timer",
> > .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
> > + WDIOF_MAGICCLOSE,
> > };
> >
> > static int imx_sc_wdt_probe(struct platform_device *pdev)
> > {
> > + struct imx_sc_wdt_device *imx_sc_wdd;
> > + struct watchdog_device *wdog;
> > struct device *dev = &pdev->dev;
> > - struct watchdog_device *imx_sc_wdd;
> > int ret;
> >
> > imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
> @@
> > -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device
> > *pdev)
> >
> > platform_set_drvdata(pdev, imx_sc_wdd);
> >
> > - imx_sc_wdd->info = &imx_sc_wdt_info;
> > - imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > - imx_sc_wdd->min_timeout = 1;
> > - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > - imx_sc_wdd->parent = dev;
> > - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > + wdog = &imx_sc_wdd->wdd;
> > + wdog->info = &imx_sc_wdt_info;
> > + wdog->ops = &imx_sc_wdt_ops;
> > + wdog->min_timeout = 1;
> > + wdog->max_timeout = MAX_TIMEOUT;
> > + wdog->parent = dev;
> > + wdog->timeout = DEFAULT_TIMEOUT;
> >
> > - watchdog_init_timeout(imx_sc_wdd, 0, dev);
> > - watchdog_stop_on_reboot(imx_sc_wdd);
> > - watchdog_stop_on_unregister(imx_sc_wdd);
> > + watchdog_init_timeout(wdog, 0, dev);
> > + watchdog_stop_on_reboot(wdog);
> > + watchdog_stop_on_unregister(wdog);
> >
> > - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
> > + ret = devm_watchdog_register_device(dev, wdog);
> > if (ret) {
> > dev_err(dev, "Failed to register watchdog device\n");
> > return ret;
> > }
> >
> > + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + true);
> > + if (ret) {
> > + dev_warn(dev, "Enable irq failed, pretimeout NOT
> supported\n");
> > + return 0;
> > + }
> > +
> > + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
> > + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
> > + if (ret) {
> > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + false);
> > + dev_warn(dev,
> > + "Register irq notifier failed, pretimeout NOT
> supported\n");
> > + return 0;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
> > + &imx_sc_wdd->wdt_notifier);
> > + if (!ret)
> > + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
> > + else
> > + dev_warn(dev, "Add action failed, pretimeout NOT
> supported\n");
> > +
> > return 0;
> > }
> >
> > static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
> > {
> > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> >
> > - if (watchdog_active(imx_sc_wdd))
> > - imx_sc_wdt_stop(imx_sc_wdd);
> > + if (watchdog_active(&imx_sc_wdd->wdd))
> > + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
> >
> > return 0;
> > }
> >
> > static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
> > {
> > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> >
> > - if (watchdog_active(imx_sc_wdd))
> > - imx_sc_wdt_start(imx_sc_wdd);
> > + if (watchdog_active(&imx_sc_wdd->wdd))
> > + imx_sc_wdt_start(&imx_sc_wdd->wdd);
> >
> > return 0;
> > }
> >

2019-05-13 19:32:42

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 1/3] dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU

On Sun, May 12, 2019 at 10:10:30AM +0000, Anson Huang wrote:
> i.MX system controller watchdog depends on SCU driver to support
> interrupt function, so it needs to be subnode of SCU node in DT,
> binding doc should be moved to fsl,scu.txt as well.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> No change, just resend patch with correct encoding.

Quoted-printable isn't really correct either. It should be 7-bit or
8-bit if UTF-8.

> ---
> .../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++
> .../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ----------------------
> 2 files changed, 15 insertions(+), 24 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt

Reviewed-by: Rob Herring <[email protected]>

2019-06-04 09:08:13

by Anson Huang

[permalink] [raw]
Subject: RE: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

Hi, Shawn
The driver and binding doc are already reviewed and waiting for DT patch, will you help review this DT patch?

Thanks,
Anson

> -----Original Message-----
> From: Anson Huang
> Sent: Sunday, May 12, 2019 6:11 PM
> To: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; Aisheng Dong
> <[email protected]>; [email protected]; Daniel Baluta
> <[email protected]>; Peng Fan <[email protected]>;
> [email protected]; [email protected]; linux-
> [email protected]; [email protected]
> Cc: dl-linux-imx <[email protected]>
> Subject: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node
> into scu node
>
> i.MX system controller watchdog has pretimeout function which depends on
> i.MX SCU driver, so it should be a subnode of SCU.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> No change, just resend patch with correct encoding.
> ---
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 0683ee2..b17c22e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -149,6 +149,11 @@
> rtc: rtc {
> compatible = "fsl,imx8qxp-sc-rtc";
> };
> +
> + watchdog {
> + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> + timeout-sec = <60>;
> + };
> };
>
> timer {
> @@ -517,9 +522,4 @@
> power-domains = <&pd IMX_SC_R_GPIO_7>;
> };
> };
> -
> - watchdog {
> - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> - timeout-sec = <60>;
> - };
> };
> --
> 2.7.4

2019-06-05 06:03:16

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

On Tue, Jun 04, 2019 at 09:06:28AM +0000, Anson Huang wrote:
> Hi, Shawn
> The driver and binding doc are already reviewed and waiting for DT patch, will you help review this DT patch?

I'm fine with it. Should I just pick this patch up, or is there any
dependency we need to handle?

Shawn

>
> Thanks,
> Anson
>
> > -----Original Message-----
> > From: Anson Huang
> > Sent: Sunday, May 12, 2019 6:11 PM
> > To: [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected]; Aisheng Dong
> > <[email protected]>; [email protected]; Daniel Baluta
> > <[email protected]>; Peng Fan <[email protected]>;
> > [email protected]; [email protected]; linux-
> > [email protected]; [email protected]
> > Cc: dl-linux-imx <[email protected]>
> > Subject: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node
> > into scu node
> >
> > i.MX system controller watchdog has pretimeout function which depends on
> > i.MX SCU driver, so it should be a subnode of SCU.
> >
> > Signed-off-by: Anson Huang <[email protected]>
> > ---
> > No change, just resend patch with correct encoding.
> > ---
> > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 0683ee2..b17c22e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -149,6 +149,11 @@
> > rtc: rtc {
> > compatible = "fsl,imx8qxp-sc-rtc";
> > };
> > +
> > + watchdog {
> > + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> > + timeout-sec = <60>;
> > + };
> > };
> >
> > timer {
> > @@ -517,9 +522,4 @@
> > power-domains = <&pd IMX_SC_R_GPIO_7>;
> > };
> > };
> > -
> > - watchdog {
> > - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> > - timeout-sec = <60>;
> > - };
> > };
> > --
> > 2.7.4
>

2019-06-05 06:12:59

by Anson Huang

[permalink] [raw]
Subject: RE: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

Hi, Shawn

> -----Original Message-----
> From: Shawn Guo <[email protected]>
> Sent: Wednesday, June 5, 2019 2:00 PM
> To: Anson Huang <[email protected]>
> Cc: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; Aisheng Dong <[email protected]>;
> [email protected]; Daniel Baluta <[email protected]>; Peng Fan
> <[email protected]>; [email protected]; linux-
> [email protected]; [email protected]; linux-arm-
> [email protected]; dl-linux-imx <[email protected]>
> Subject: Re: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog
> node into scu node
>
> On Tue, Jun 04, 2019 at 09:06:28AM +0000, Anson Huang wrote:
> > Hi, Shawn
> > The driver and binding doc are already reviewed and waiting for DT
> patch, will you help review this DT patch?
>
> I'm fine with it. Should I just pick this patch up, or is there any dependency
> we need to handle?

No dependency, it just makes more sense to move the node into SCU node as it is NOW depending on SCU
driver. Once you pick up this patch (and maybe the dt-binding patch as well?), I will notify the watchdog
maintainer to pick up the watchdog patch in this series.

Thanks,
Anson

>
> Shawn
>
> >
> > Thanks,
> > Anson
> >
> > > -----Original Message-----
> > > From: Anson Huang
> > > Sent: Sunday, May 12, 2019 6:11 PM
> > > To: [email protected]; [email protected];
> > > [email protected]; [email protected]; [email protected];
> > > [email protected]; [email protected]; [email protected];
> > > Aisheng Dong <[email protected]>; [email protected]; Daniel
> > > Baluta <[email protected]>; Peng Fan <[email protected]>;
> > > [email protected]; [email protected]; linux-
> > > [email protected]; [email protected]
> > > Cc: dl-linux-imx <[email protected]>
> > > Subject: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog
> > > node into scu node
> > >
> > > i.MX system controller watchdog has pretimeout function which
> > > depends on i.MX SCU driver, so it should be a subnode of SCU.
> > >
> > > Signed-off-by: Anson Huang <[email protected]>
> > > ---
> > > No change, just resend patch with correct encoding.
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
> > > 1 file changed, 5 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > index 0683ee2..b17c22e 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > @@ -149,6 +149,11 @@
> > > rtc: rtc {
> > > compatible = "fsl,imx8qxp-sc-rtc";
> > > };
> > > +
> > > + watchdog {
> > > + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> > > + timeout-sec = <60>;
> > > + };
> > > };
> > >
> > > timer {
> > > @@ -517,9 +522,4 @@
> > > power-domains = <&pd IMX_SC_R_GPIO_7>;
> > > };
> > > };
> > > -
> > > - watchdog {
> > > - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> > > - timeout-sec = <60>;
> > > - };
> > > };
> > > --
> > > 2.7.4
> >

2019-06-05 06:14:24

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

On Wed, Jun 05, 2019 at 06:09:12AM +0000, Anson Huang wrote:
> Hi, Shawn
>
> > -----Original Message-----
> > From: Shawn Guo <[email protected]>
> > Sent: Wednesday, June 5, 2019 2:00 PM
> > To: Anson Huang <[email protected]>
> > Cc: [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; Aisheng Dong <[email protected]>;
> > [email protected]; Daniel Baluta <[email protected]>; Peng Fan
> > <[email protected]>; [email protected]; linux-
> > [email protected]; [email protected]; linux-arm-
> > [email protected]; dl-linux-imx <[email protected]>
> > Subject: Re: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog
> > node into scu node
> >
> > On Tue, Jun 04, 2019 at 09:06:28AM +0000, Anson Huang wrote:
> > > Hi, Shawn
> > > The driver and binding doc are already reviewed and waiting for DT
> > patch, will you help review this DT patch?
> >
> > I'm fine with it. Should I just pick this patch up, or is there any dependency
> > we need to handle?
>
> No dependency, it just makes more sense to move the node into SCU node as it is NOW depending on SCU
> driver. Once you pick up this patch

Just applied.

> (and maybe the dt-binding patch as well?),

It makes more sense to have it go through watchdog tree.

Shawn

> I will notify the watchdog
> maintainer to pick up the watchdog patch in this series.

2019-06-05 06:26:05

by Anson Huang

[permalink] [raw]
Subject: RE: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

Hi, Guenter

> -----Original Message-----
> From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
> Sent: Sunday, May 12, 2019 9:28 PM
> To: Anson Huang <[email protected]>; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> Aisheng Dong <[email protected]>; [email protected]; Daniel
> Baluta <[email protected]>; Peng Fan <[email protected]>;
> [email protected]; [email protected]; linux-
> [email protected]; [email protected]
> Cc: dl-linux-imx <[email protected]>
> Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
> support
>
> On 5/12/19 3:10 AM, Anson Huang wrote:
> > i.MX system controller watchdog can support pretimeout IRQ via general
> > SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU
> > IPC ready, then enable corresponding SCU IRQ group and register SCU
> > IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be
> > handled and watchdog pretimeout notifier will be called to handle the
> > event.
> >
> > Signed-off-by: Anson Huang <[email protected]>
>
> Revviewed-by: Guenter Roeck <[email protected]>
>
> Other patches waiting for DT review. IMX API feedback below.

Shaw just picked up the DT patch. Would you please pick up this driver and dt-binding patch
to you git repo?

Thanks,
Anson

>
> Side note: This patch depends on 'firmware: imx: enable imx scu general irq
> function' which is not yet in mainline.
>
> > ---
> > No change, just resend patch with correct encoding.
> > ---
> > drivers/watchdog/Kconfig | 1 +
> > drivers/watchdog/imx_sc_wdt.c | 116
> +++++++++++++++++++++++++++++++++++-------
> > 2 files changed, 98 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> > 7ea6037..e08238c 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -716,6 +716,7 @@ config IMX2_WDT
> > config IMX_SC_WDT
> > tristate "IMX SC Watchdog"
> > depends on HAVE_ARM_SMCCC
> > + depends on IMX_SCU
> > select WATCHDOG_CORE
> > help
> > This is the driver for the system controller watchdog diff --git
> > a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c index
> > 49848b6..6ecc03f 100644
> > --- a/drivers/watchdog/imx_sc_wdt.c
> > +++ b/drivers/watchdog/imx_sc_wdt.c
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <linux/arm-smccc.h>
> > +#include <linux/firmware/imx/sci.h>
> > #include <linux/io.h>
> > #include <linux/init.h>
> > #include <linux/kernel.h>
> > @@ -33,11 +34,19 @@
> >
> > #define SC_TIMER_WDOG_ACTION_PARTITION 0
> >
> > +#define SC_IRQ_WDOG 1
> > +#define SC_IRQ_GROUP_WDOG 1
> > +
> > static bool nowayout = WATCHDOG_NOWAYOUT;
> > module_param(nowayout, bool, 0000);
> > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once
> started (default="
> > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> >
> > +struct imx_sc_wdt_device {
> > + struct watchdog_device wdd;
> > + struct notifier_block wdt_notifier;
> > +};
> > +
> > static int imx_sc_wdt_ping(struct watchdog_device *wdog)
> > {
> > struct arm_smccc_res res;
> > @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct
> watchdog_device *wdog,
> > return res.a0 ? -EACCES : 0;
> > }
> >
> > +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
> > + unsigned int pretimeout)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(IMX_SIP_TIMER,
> IMX_SIP_TIMER_SET_PRETIME_WDOG,
> > + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
> > + if (res.a0)
> > + return -EACCES;
> > +
> > + wdog->pretimeout = pretimeout;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_sc_wdt_notify(struct notifier_block *nb,
> > + unsigned long event, void *group) {
> > + struct imx_sc_wdt_device *imx_sc_wdd =
> > + container_of(nb,
> > + struct imx_sc_wdt_device,
> > + wdt_notifier);
> > +
> > + if (event & SC_IRQ_WDOG &&
> > + *(u8 *)group == SC_IRQ_GROUP_WDOG)
> > + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
>
> This should really not be necessary. Event mask and target group (if needed
> with a wildcard for the group) should be parameters of
> imx_scu_irq_register_notifier(), and be handled in the imx code.
>
> Also, passing 'group' as pointed seems excessive. Might as well pass it
> directly.
>
> Guenter
>
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_sc_wdt_action(void *data) {
> > + struct notifier_block *wdt_notifier = data;
> > +
> > + imx_scu_irq_unregister_notifier(wdt_notifier);
> > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + false);
> > +}
> > +
> > static const struct watchdog_ops imx_sc_wdt_ops = {
> > .owner = THIS_MODULE,
> > .start = imx_sc_wdt_start,
> > .stop = imx_sc_wdt_stop,
> > .ping = imx_sc_wdt_ping,
> > .set_timeout = imx_sc_wdt_set_timeout,
> > + .set_pretimeout = imx_sc_wdt_set_pretimeout,
> > };
> >
> > -static const struct watchdog_info imx_sc_wdt_info = {
> > +static struct watchdog_info imx_sc_wdt_info = {
> > .identity = "i.MX SC watchdog timer",
> > .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
> > + WDIOF_MAGICCLOSE,
> > };
> >
> > static int imx_sc_wdt_probe(struct platform_device *pdev)
> > {
> > + struct imx_sc_wdt_device *imx_sc_wdd;
> > + struct watchdog_device *wdog;
> > struct device *dev = &pdev->dev;
> > - struct watchdog_device *imx_sc_wdd;
> > int ret;
> >
> > imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
> @@
> > -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device
> > *pdev)
> >
> > platform_set_drvdata(pdev, imx_sc_wdd);
> >
> > - imx_sc_wdd->info = &imx_sc_wdt_info;
> > - imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > - imx_sc_wdd->min_timeout = 1;
> > - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > - imx_sc_wdd->parent = dev;
> > - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > + wdog = &imx_sc_wdd->wdd;
> > + wdog->info = &imx_sc_wdt_info;
> > + wdog->ops = &imx_sc_wdt_ops;
> > + wdog->min_timeout = 1;
> > + wdog->max_timeout = MAX_TIMEOUT;
> > + wdog->parent = dev;
> > + wdog->timeout = DEFAULT_TIMEOUT;
> >
> > - watchdog_init_timeout(imx_sc_wdd, 0, dev);
> > - watchdog_stop_on_reboot(imx_sc_wdd);
> > - watchdog_stop_on_unregister(imx_sc_wdd);
> > + watchdog_init_timeout(wdog, 0, dev);
> > + watchdog_stop_on_reboot(wdog);
> > + watchdog_stop_on_unregister(wdog);
> >
> > - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
> > + ret = devm_watchdog_register_device(dev, wdog);
> > if (ret) {
> > dev_err(dev, "Failed to register watchdog device\n");
> > return ret;
> > }
> >
> > + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + true);
> > + if (ret) {
> > + dev_warn(dev, "Enable irq failed, pretimeout NOT
> supported\n");
> > + return 0;
> > + }
> > +
> > + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
> > + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
> > + if (ret) {
> > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > + SC_IRQ_WDOG,
> > + false);
> > + dev_warn(dev,
> > + "Register irq notifier failed, pretimeout NOT
> supported\n");
> > + return 0;
> > + }
> > +
> > + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
> > + &imx_sc_wdd->wdt_notifier);
> > + if (!ret)
> > + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
> > + else
> > + dev_warn(dev, "Add action failed, pretimeout NOT
> supported\n");
> > +
> > return 0;
> > }
> >
> > static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
> > {
> > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> >
> > - if (watchdog_active(imx_sc_wdd))
> > - imx_sc_wdt_stop(imx_sc_wdd);
> > + if (watchdog_active(&imx_sc_wdd->wdd))
> > + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
> >
> > return 0;
> > }
> >
> > static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
> > {
> > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> >
> > - if (watchdog_active(imx_sc_wdd))
> > - imx_sc_wdt_start(imx_sc_wdd);
> > + if (watchdog_active(&imx_sc_wdd->wdd))
> > + imx_sc_wdt_start(&imx_sc_wdd->wdd);
> >
> > return 0;
> > }
> >

2019-06-07 18:59:43

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

On Wed, Jun 05, 2019 at 06:24:33AM +0000, Anson Huang wrote:
> Hi, Guenter
>
> > -----Original Message-----
> > From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
> > Sent: Sunday, May 12, 2019 9:28 PM
> > To: Anson Huang <[email protected]>; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > Aisheng Dong <[email protected]>; [email protected]; Daniel
> > Baluta <[email protected]>; Peng Fan <[email protected]>;
> > [email protected]; [email protected]; linux-
> > [email protected]; [email protected]
> > Cc: dl-linux-imx <[email protected]>
> > Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
> > support
> >
> > On 5/12/19 3:10 AM, Anson Huang wrote:
> > > i.MX system controller watchdog can support pretimeout IRQ via general
> > > SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU
> > > IPC ready, then enable corresponding SCU IRQ group and register SCU
> > > IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be
> > > handled and watchdog pretimeout notifier will be called to handle the
> > > event.
> > >
> > > Signed-off-by: Anson Huang <[email protected]>
> >
> > Revviewed-by: Guenter Roeck <[email protected]>
> >
> > Other patches waiting for DT review. IMX API feedback below.
>
> Shaw just picked up the DT patch. Would you please pick up this driver and dt-binding patch
> to you git repo?
>
I'll pick up patch 3/3, but I can not pick up patches into arch/arm64/boot/;
that is the responsibility of arm64 maintainers. I can only do that
if I get an explicit Ack and permission to do so from an arm64 maintainer,
and I don't recall getting that.

Guenter

> Thanks,
> Anson
>
> >
> > Side note: This patch depends on 'firmware: imx: enable imx scu general irq
> > function' which is not yet in mainline.
> >
> > > ---
> > > No change, just resend patch with correct encoding.
> > > ---
> > > drivers/watchdog/Kconfig | 1 +
> > > drivers/watchdog/imx_sc_wdt.c | 116
> > +++++++++++++++++++++++++++++++++++-------
> > > 2 files changed, 98 insertions(+), 19 deletions(-)
> > >
> > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> > > 7ea6037..e08238c 100644
> > > --- a/drivers/watchdog/Kconfig
> > > +++ b/drivers/watchdog/Kconfig
> > > @@ -716,6 +716,7 @@ config IMX2_WDT
> > > config IMX_SC_WDT
> > > tristate "IMX SC Watchdog"
> > > depends on HAVE_ARM_SMCCC
> > > + depends on IMX_SCU
> > > select WATCHDOG_CORE
> > > help
> > > This is the driver for the system controller watchdog diff --git
> > > a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c index
> > > 49848b6..6ecc03f 100644
> > > --- a/drivers/watchdog/imx_sc_wdt.c
> > > +++ b/drivers/watchdog/imx_sc_wdt.c
> > > @@ -4,6 +4,7 @@
> > > */
> > >
> > > #include <linux/arm-smccc.h>
> > > +#include <linux/firmware/imx/sci.h>
> > > #include <linux/io.h>
> > > #include <linux/init.h>
> > > #include <linux/kernel.h>
> > > @@ -33,11 +34,19 @@
> > >
> > > #define SC_TIMER_WDOG_ACTION_PARTITION 0
> > >
> > > +#define SC_IRQ_WDOG 1
> > > +#define SC_IRQ_GROUP_WDOG 1
> > > +
> > > static bool nowayout = WATCHDOG_NOWAYOUT;
> > > module_param(nowayout, bool, 0000);
> > > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once
> > started (default="
> > > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> > >
> > > +struct imx_sc_wdt_device {
> > > + struct watchdog_device wdd;
> > > + struct notifier_block wdt_notifier;
> > > +};
> > > +
> > > static int imx_sc_wdt_ping(struct watchdog_device *wdog)
> > > {
> > > struct arm_smccc_res res;
> > > @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct
> > watchdog_device *wdog,
> > > return res.a0 ? -EACCES : 0;
> > > }
> > >
> > > +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
> > > + unsigned int pretimeout)
> > > +{
> > > + struct arm_smccc_res res;
> > > +
> > > + arm_smccc_smc(IMX_SIP_TIMER,
> > IMX_SIP_TIMER_SET_PRETIME_WDOG,
> > > + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
> > > + if (res.a0)
> > > + return -EACCES;
> > > +
> > > + wdog->pretimeout = pretimeout;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx_sc_wdt_notify(struct notifier_block *nb,
> > > + unsigned long event, void *group) {
> > > + struct imx_sc_wdt_device *imx_sc_wdd =
> > > + container_of(nb,
> > > + struct imx_sc_wdt_device,
> > > + wdt_notifier);
> > > +
> > > + if (event & SC_IRQ_WDOG &&
> > > + *(u8 *)group == SC_IRQ_GROUP_WDOG)
> > > + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
> >
> > This should really not be necessary. Event mask and target group (if needed
> > with a wildcard for the group) should be parameters of
> > imx_scu_irq_register_notifier(), and be handled in the imx code.
> >
> > Also, passing 'group' as pointed seems excessive. Might as well pass it
> > directly.
> >
> > Guenter
> >
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void imx_sc_wdt_action(void *data) {
> > > + struct notifier_block *wdt_notifier = data;
> > > +
> > > + imx_scu_irq_unregister_notifier(wdt_notifier);
> > > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > + SC_IRQ_WDOG,
> > > + false);
> > > +}
> > > +
> > > static const struct watchdog_ops imx_sc_wdt_ops = {
> > > .owner = THIS_MODULE,
> > > .start = imx_sc_wdt_start,
> > > .stop = imx_sc_wdt_stop,
> > > .ping = imx_sc_wdt_ping,
> > > .set_timeout = imx_sc_wdt_set_timeout,
> > > + .set_pretimeout = imx_sc_wdt_set_pretimeout,
> > > };
> > >
> > > -static const struct watchdog_info imx_sc_wdt_info = {
> > > +static struct watchdog_info imx_sc_wdt_info = {
> > > .identity = "i.MX SC watchdog timer",
> > > .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > > - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
> > > + WDIOF_MAGICCLOSE,
> > > };
> > >
> > > static int imx_sc_wdt_probe(struct platform_device *pdev)
> > > {
> > > + struct imx_sc_wdt_device *imx_sc_wdd;
> > > + struct watchdog_device *wdog;
> > > struct device *dev = &pdev->dev;
> > > - struct watchdog_device *imx_sc_wdd;
> > > int ret;
> > >
> > > imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
> > @@
> > > -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device
> > > *pdev)
> > >
> > > platform_set_drvdata(pdev, imx_sc_wdd);
> > >
> > > - imx_sc_wdd->info = &imx_sc_wdt_info;
> > > - imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > > - imx_sc_wdd->min_timeout = 1;
> > > - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > > - imx_sc_wdd->parent = dev;
> > > - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > > + wdog = &imx_sc_wdd->wdd;
> > > + wdog->info = &imx_sc_wdt_info;
> > > + wdog->ops = &imx_sc_wdt_ops;
> > > + wdog->min_timeout = 1;
> > > + wdog->max_timeout = MAX_TIMEOUT;
> > > + wdog->parent = dev;
> > > + wdog->timeout = DEFAULT_TIMEOUT;
> > >
> > > - watchdog_init_timeout(imx_sc_wdd, 0, dev);
> > > - watchdog_stop_on_reboot(imx_sc_wdd);
> > > - watchdog_stop_on_unregister(imx_sc_wdd);
> > > + watchdog_init_timeout(wdog, 0, dev);
> > > + watchdog_stop_on_reboot(wdog);
> > > + watchdog_stop_on_unregister(wdog);
> > >
> > > - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
> > > + ret = devm_watchdog_register_device(dev, wdog);
> > > if (ret) {
> > > dev_err(dev, "Failed to register watchdog device\n");
> > > return ret;
> > > }
> > >
> > > + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > + SC_IRQ_WDOG,
> > > + true);
> > > + if (ret) {
> > > + dev_warn(dev, "Enable irq failed, pretimeout NOT
> > supported\n");
> > > + return 0;
> > > + }
> > > +
> > > + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
> > > + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
> > > + if (ret) {
> > > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > + SC_IRQ_WDOG,
> > > + false);
> > > + dev_warn(dev,
> > > + "Register irq notifier failed, pretimeout NOT
> > supported\n");
> > > + return 0;
> > > + }
> > > +
> > > + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
> > > + &imx_sc_wdd->wdt_notifier);
> > > + if (!ret)
> > > + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
> > > + else
> > > + dev_warn(dev, "Add action failed, pretimeout NOT
> > supported\n");
> > > +
> > > return 0;
> > > }
> > >
> > > static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
> > > {
> > > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> > >
> > > - if (watchdog_active(imx_sc_wdd))
> > > - imx_sc_wdt_stop(imx_sc_wdd);
> > > + if (watchdog_active(&imx_sc_wdd->wdd))
> > > + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
> > >
> > > return 0;
> > > }
> > >
> > > static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
> > > {
> > > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> > >
> > > - if (watchdog_active(imx_sc_wdd))
> > > - imx_sc_wdt_start(imx_sc_wdd);
> > > + if (watchdog_active(&imx_sc_wdd->wdd))
> > > + imx_sc_wdt_start(&imx_sc_wdd->wdd);
> > >
> > > return 0;
> > > }
> > >
>

2019-06-08 09:34:13

by Anson Huang

[permalink] [raw]
Subject: RE: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

Hi, Guenter

> -----Original Message-----
> From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
> Sent: Saturday, June 8, 2019 1:41 AM
> To: Anson Huang <[email protected]>
> Cc: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; Aisheng Dong <[email protected]>;
> [email protected]; Daniel Baluta <[email protected]>; Peng Fan
> <[email protected]>; [email protected]; linux-
> [email protected]; [email protected]; linux-arm-
> [email protected]; dl-linux-imx <[email protected]>
> Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
> support
>
> On Wed, Jun 05, 2019 at 06:24:33AM +0000, Anson Huang wrote:
> > Hi, Guenter
> >
> > > -----Original Message-----
> > > From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
> > > Sent: Sunday, May 12, 2019 9:28 PM
> > > To: Anson Huang <[email protected]>; [email protected];
> > > [email protected]; [email protected];
> [email protected];
> > > [email protected]; [email protected]; [email protected];
> > > Aisheng Dong <[email protected]>; [email protected]; Daniel
> > > Baluta <[email protected]>; Peng Fan <[email protected]>;
> > > [email protected]; [email protected]; linux-
> > > [email protected]; [email protected]
> > > Cc: dl-linux-imx <[email protected]>
> > > Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
> > > support
> > >
> > > On 5/12/19 3:10 AM, Anson Huang wrote:
> > > > i.MX system controller watchdog can support pretimeout IRQ via
> > > > general SCU MU IRQ, it depends on IMX_SCU and driver MUST be
> > > > probed after SCU IPC ready, then enable corresponding SCU IRQ
> > > > group and register SCU IRQ notifier, when watchdog pretimeout IRQ
> > > > fires, SCU MU IRQ will be handled and watchdog pretimeout notifier
> > > > will be called to handle the event.
> > > >
> > > > Signed-off-by: Anson Huang <[email protected]>
> > >
> > > Revviewed-by: Guenter Roeck <[email protected]>
> > >
> > > Other patches waiting for DT review. IMX API feedback below.
> >
> > Shaw just picked up the DT patch. Would you please pick up this driver
> > and dt-binding patch to you git repo?
> >
> I'll pick up patch 3/3, but I can not pick up patches into arch/arm64/boot/;
> that is the responsibility of arm64 maintainers. I can only do that if I get an
> explicit Ack and permission to do so from an arm64 maintainer, and I don't
> recall getting that.

Will you also pick up 1/3, the DT binding patch, as DT binding normally go with
driver, if NOT, please advise who should pick up this patch.

Thanks,
Anson.

>
> Guenter
>
> > Thanks,
> > Anson
> >
> > >
> > > Side note: This patch depends on 'firmware: imx: enable imx scu
> > > general irq function' which is not yet in mainline.
> > >
> > > > ---
> > > > No change, just resend patch with correct encoding.
> > > > ---
> > > > drivers/watchdog/Kconfig | 1 +
> > > > drivers/watchdog/imx_sc_wdt.c | 116
> > > +++++++++++++++++++++++++++++++++++-------
> > > > 2 files changed, 98 insertions(+), 19 deletions(-)
> > > >
> > > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > > > index 7ea6037..e08238c 100644
> > > > --- a/drivers/watchdog/Kconfig
> > > > +++ b/drivers/watchdog/Kconfig
> > > > @@ -716,6 +716,7 @@ config IMX2_WDT
> > > > config IMX_SC_WDT
> > > > tristate "IMX SC Watchdog"
> > > > depends on HAVE_ARM_SMCCC
> > > > + depends on IMX_SCU
> > > > select WATCHDOG_CORE
> > > > help
> > > > This is the driver for the system controller watchdog diff
> > > > --git a/drivers/watchdog/imx_sc_wdt.c
> > > > b/drivers/watchdog/imx_sc_wdt.c index 49848b6..6ecc03f 100644
> > > > --- a/drivers/watchdog/imx_sc_wdt.c
> > > > +++ b/drivers/watchdog/imx_sc_wdt.c
> > > > @@ -4,6 +4,7 @@
> > > > */
> > > >
> > > > #include <linux/arm-smccc.h>
> > > > +#include <linux/firmware/imx/sci.h>
> > > > #include <linux/io.h>
> > > > #include <linux/init.h>
> > > > #include <linux/kernel.h>
> > > > @@ -33,11 +34,19 @@
> > > >
> > > > #define SC_TIMER_WDOG_ACTION_PARTITION 0
> > > >
> > > > +#define SC_IRQ_WDOG 1
> > > > +#define SC_IRQ_GROUP_WDOG 1
> > > > +
> > > > static bool nowayout = WATCHDOG_NOWAYOUT;
> > > > module_param(nowayout, bool, 0000);
> > > > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once
> > > started (default="
> > > > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> > > >
> > > > +struct imx_sc_wdt_device {
> > > > + struct watchdog_device wdd;
> > > > + struct notifier_block wdt_notifier; };
> > > > +
> > > > static int imx_sc_wdt_ping(struct watchdog_device *wdog)
> > > > {
> > > > struct arm_smccc_res res;
> > > > @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct
> > > watchdog_device *wdog,
> > > > return res.a0 ? -EACCES : 0;
> > > > }
> > > >
> > > > +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
> > > > + unsigned int pretimeout) {
> > > > + struct arm_smccc_res res;
> > > > +
> > > > + arm_smccc_smc(IMX_SIP_TIMER,
> > > IMX_SIP_TIMER_SET_PRETIME_WDOG,
> > > > + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
> > > > + if (res.a0)
> > > > + return -EACCES;
> > > > +
> > > > + wdog->pretimeout = pretimeout;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int imx_sc_wdt_notify(struct notifier_block *nb,
> > > > + unsigned long event, void *group) {
> > > > + struct imx_sc_wdt_device *imx_sc_wdd =
> > > > + container_of(nb,
> > > > + struct imx_sc_wdt_device,
> > > > + wdt_notifier);
> > > > +
> > > > + if (event & SC_IRQ_WDOG &&
> > > > + *(u8 *)group == SC_IRQ_GROUP_WDOG)
> > > > + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
> > >
> > > This should really not be necessary. Event mask and target group (if
> > > needed with a wildcard for the group) should be parameters of
> > > imx_scu_irq_register_notifier(), and be handled in the imx code.
> > >
> > > Also, passing 'group' as pointed seems excessive. Might as well pass
> > > it directly.
> > >
> > > Guenter
> > >
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void imx_sc_wdt_action(void *data) {
> > > > + struct notifier_block *wdt_notifier = data;
> > > > +
> > > > + imx_scu_irq_unregister_notifier(wdt_notifier);
> > > > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > > + SC_IRQ_WDOG,
> > > > + false);
> > > > +}
> > > > +
> > > > static const struct watchdog_ops imx_sc_wdt_ops = {
> > > > .owner = THIS_MODULE,
> > > > .start = imx_sc_wdt_start,
> > > > .stop = imx_sc_wdt_stop,
> > > > .ping = imx_sc_wdt_ping,
> > > > .set_timeout = imx_sc_wdt_set_timeout,
> > > > + .set_pretimeout = imx_sc_wdt_set_pretimeout,
> > > > };
> > > >
> > > > -static const struct watchdog_info imx_sc_wdt_info = {
> > > > +static struct watchdog_info imx_sc_wdt_info = {
> > > > .identity = "i.MX SC watchdog timer",
> > > > .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> > > > - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
> > > > + WDIOF_MAGICCLOSE,
> > > > };
> > > >
> > > > static int imx_sc_wdt_probe(struct platform_device *pdev)
> > > > {
> > > > + struct imx_sc_wdt_device *imx_sc_wdd;
> > > > + struct watchdog_device *wdog;
> > > > struct device *dev = &pdev->dev;
> > > > - struct watchdog_device *imx_sc_wdd;
> > > > int ret;
> > > >
> > > > imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd),
> > > > GFP_KERNEL);
> > > @@
> > > > -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct
> > > > platform_device
> > > > *pdev)
> > > >
> > > > platform_set_drvdata(pdev, imx_sc_wdd);
> > > >
> > > > - imx_sc_wdd->info = &imx_sc_wdt_info;
> > > > - imx_sc_wdd->ops = &imx_sc_wdt_ops;
> > > > - imx_sc_wdd->min_timeout = 1;
> > > > - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
> > > > - imx_sc_wdd->parent = dev;
> > > > - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
> > > > + wdog = &imx_sc_wdd->wdd;
> > > > + wdog->info = &imx_sc_wdt_info;
> > > > + wdog->ops = &imx_sc_wdt_ops;
> > > > + wdog->min_timeout = 1;
> > > > + wdog->max_timeout = MAX_TIMEOUT;
> > > > + wdog->parent = dev;
> > > > + wdog->timeout = DEFAULT_TIMEOUT;
> > > >
> > > > - watchdog_init_timeout(imx_sc_wdd, 0, dev);
> > > > - watchdog_stop_on_reboot(imx_sc_wdd);
> > > > - watchdog_stop_on_unregister(imx_sc_wdd);
> > > > + watchdog_init_timeout(wdog, 0, dev);
> > > > + watchdog_stop_on_reboot(wdog);
> > > > + watchdog_stop_on_unregister(wdog);
> > > >
> > > > - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
> > > > + ret = devm_watchdog_register_device(dev, wdog);
> > > > if (ret) {
> > > > dev_err(dev, "Failed to register watchdog device\n");
> > > > return ret;
> > > > }
> > > >
> > > > + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > > + SC_IRQ_WDOG,
> > > > + true);
> > > > + if (ret) {
> > > > + dev_warn(dev, "Enable irq failed, pretimeout NOT
> > > supported\n");
> > > > + return 0;
> > > > + }
> > > > +
> > > > + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
> > > > + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
> > > > + if (ret) {
> > > > + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
> > > > + SC_IRQ_WDOG,
> > > > + false);
> > > > + dev_warn(dev,
> > > > + "Register irq notifier failed, pretimeout NOT
> > > supported\n");
> > > > + return 0;
> > > > + }
> > > > +
> > > > + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
> > > > + &imx_sc_wdd->wdt_notifier);
> > > > + if (!ret)
> > > > + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
> > > > + else
> > > > + dev_warn(dev, "Add action failed, pretimeout NOT
> > > supported\n");
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
> > > > {
> > > > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > >
> > > > - if (watchdog_active(imx_sc_wdd))
> > > > - imx_sc_wdt_stop(imx_sc_wdd);
> > > > + if (watchdog_active(&imx_sc_wdd->wdd))
> > > > + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
> > > >
> > > > return 0;
> > > > }
> > > >
> > > > static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
> > > > {
> > > > - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > > + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
> > > >
> > > > - if (watchdog_active(imx_sc_wdd))
> > > > - imx_sc_wdt_start(imx_sc_wdd);
> > > > + if (watchdog_active(&imx_sc_wdd->wdd))
> > > > + imx_sc_wdt_start(&imx_sc_wdd->wdd);
> > > >
> > > > return 0;
> > > > }
> > > >
> >

2019-06-08 13:26:23

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout support

On 6/8/19 2:32 AM, Anson Huang wrote:
> Hi, Guenter
>
>> -----Original Message-----
>> From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
>> Sent: Saturday, June 8, 2019 1:41 AM
>> To: Anson Huang <[email protected]>
>> Cc: [email protected]; [email protected]; [email protected];
>> [email protected]; [email protected]; [email protected];
>> [email protected]; Aisheng Dong <[email protected]>;
>> [email protected]; Daniel Baluta <[email protected]>; Peng Fan
>> <[email protected]>; [email protected]; linux-
>> [email protected]; [email protected]; linux-arm-
>> [email protected]; dl-linux-imx <[email protected]>
>> Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
>> support
>>
>> On Wed, Jun 05, 2019 at 06:24:33AM +0000, Anson Huang wrote:
>>> Hi, Guenter
>>>
>>>> -----Original Message-----
>>>> From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
>>>> Sent: Sunday, May 12, 2019 9:28 PM
>>>> To: Anson Huang <[email protected]>; [email protected];
>>>> [email protected]; [email protected];
>> [email protected];
>>>> [email protected]; [email protected]; [email protected];
>>>> Aisheng Dong <[email protected]>; [email protected]; Daniel
>>>> Baluta <[email protected]>; Peng Fan <[email protected]>;
>>>> [email protected]; [email protected]; linux-
>>>> [email protected]; [email protected]
>>>> Cc: dl-linux-imx <[email protected]>
>>>> Subject: Re: [PATCH RESEND V4 3/3] watchdog: imx_sc: Add pretimeout
>>>> support
>>>>
>>>> On 5/12/19 3:10 AM, Anson Huang wrote:
>>>>> i.MX system controller watchdog can support pretimeout IRQ via
>>>>> general SCU MU IRQ, it depends on IMX_SCU and driver MUST be
>>>>> probed after SCU IPC ready, then enable corresponding SCU IRQ
>>>>> group and register SCU IRQ notifier, when watchdog pretimeout IRQ
>>>>> fires, SCU MU IRQ will be handled and watchdog pretimeout notifier
>>>>> will be called to handle the event.
>>>>>
>>>>> Signed-off-by: Anson Huang <[email protected]>
>>>>
>>>> Revviewed-by: Guenter Roeck <[email protected]>
>>>>
>>>> Other patches waiting for DT review. IMX API feedback below.
>>>
>>> Shaw just picked up the DT patch. Would you please pick up this driver
>>> and dt-binding patch to you git repo?
>>>
>> I'll pick up patch 3/3, but I can not pick up patches into arch/arm64/boot/;
>> that is the responsibility of arm64 maintainers. I can only do that if I get an
>> explicit Ack and permission to do so from an arm64 maintainer, and I don't
>> recall getting that.
>
> Will you also pick up 1/3, the DT binding patch, as DT binding normally go with
> driver, if NOT, please advise who should pick up this patch.
>

Makes sense. Will do.

Guenter

> Thanks,
> Anson.
>
>>
>> Guenter
>>
>>> Thanks,
>>> Anson
>>>
>>>>
>>>> Side note: This patch depends on 'firmware: imx: enable imx scu
>>>> general irq function' which is not yet in mainline.
>>>>
>>>>> ---
>>>>> No change, just resend patch with correct encoding.
>>>>> ---
>>>>> drivers/watchdog/Kconfig | 1 +
>>>>> drivers/watchdog/imx_sc_wdt.c | 116
>>>> +++++++++++++++++++++++++++++++++++-------
>>>>> 2 files changed, 98 insertions(+), 19 deletions(-)
>>>>>
>>>>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>>>>> index 7ea6037..e08238c 100644
>>>>> --- a/drivers/watchdog/Kconfig
>>>>> +++ b/drivers/watchdog/Kconfig
>>>>> @@ -716,6 +716,7 @@ config IMX2_WDT
>>>>> config IMX_SC_WDT
>>>>> tristate "IMX SC Watchdog"
>>>>> depends on HAVE_ARM_SMCCC
>>>>> + depends on IMX_SCU
>>>>> select WATCHDOG_CORE
>>>>> help
>>>>> This is the driver for the system controller watchdog diff
>>>>> --git a/drivers/watchdog/imx_sc_wdt.c
>>>>> b/drivers/watchdog/imx_sc_wdt.c index 49848b6..6ecc03f 100644
>>>>> --- a/drivers/watchdog/imx_sc_wdt.c
>>>>> +++ b/drivers/watchdog/imx_sc_wdt.c
>>>>> @@ -4,6 +4,7 @@
>>>>> */
>>>>>
>>>>> #include <linux/arm-smccc.h>
>>>>> +#include <linux/firmware/imx/sci.h>
>>>>> #include <linux/io.h>
>>>>> #include <linux/init.h>
>>>>> #include <linux/kernel.h>
>>>>> @@ -33,11 +34,19 @@
>>>>>
>>>>> #define SC_TIMER_WDOG_ACTION_PARTITION 0
>>>>>
>>>>> +#define SC_IRQ_WDOG 1
>>>>> +#define SC_IRQ_GROUP_WDOG 1
>>>>> +
>>>>> static bool nowayout = WATCHDOG_NOWAYOUT;
>>>>> module_param(nowayout, bool, 0000);
>>>>> MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once
>>>> started (default="
>>>>> __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>>>>>
>>>>> +struct imx_sc_wdt_device {
>>>>> + struct watchdog_device wdd;
>>>>> + struct notifier_block wdt_notifier; };
>>>>> +
>>>>> static int imx_sc_wdt_ping(struct watchdog_device *wdog)
>>>>> {
>>>>> struct arm_smccc_res res;
>>>>> @@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct
>>>> watchdog_device *wdog,
>>>>> return res.a0 ? -EACCES : 0;
>>>>> }
>>>>>
>>>>> +static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
>>>>> + unsigned int pretimeout) {
>>>>> + struct arm_smccc_res res;
>>>>> +
>>>>> + arm_smccc_smc(IMX_SIP_TIMER,
>>>> IMX_SIP_TIMER_SET_PRETIME_WDOG,
>>>>> + pretimeout * 1000, 0, 0, 0, 0, 0, &res);
>>>>> + if (res.a0)
>>>>> + return -EACCES;
>>>>> +
>>>>> + wdog->pretimeout = pretimeout;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int imx_sc_wdt_notify(struct notifier_block *nb,
>>>>> + unsigned long event, void *group) {
>>>>> + struct imx_sc_wdt_device *imx_sc_wdd =
>>>>> + container_of(nb,
>>>>> + struct imx_sc_wdt_device,
>>>>> + wdt_notifier);
>>>>> +
>>>>> + if (event & SC_IRQ_WDOG &&
>>>>> + *(u8 *)group == SC_IRQ_GROUP_WDOG)
>>>>> + watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
>>>>
>>>> This should really not be necessary. Event mask and target group (if
>>>> needed with a wildcard for the group) should be parameters of
>>>> imx_scu_irq_register_notifier(), and be handled in the imx code.
>>>>
>>>> Also, passing 'group' as pointed seems excessive. Might as well pass
>>>> it directly.
>>>>
>>>> Guenter
>>>>
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static void imx_sc_wdt_action(void *data) {
>>>>> + struct notifier_block *wdt_notifier = data;
>>>>> +
>>>>> + imx_scu_irq_unregister_notifier(wdt_notifier);
>>>>> + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
>>>>> + SC_IRQ_WDOG,
>>>>> + false);
>>>>> +}
>>>>> +
>>>>> static const struct watchdog_ops imx_sc_wdt_ops = {
>>>>> .owner = THIS_MODULE,
>>>>> .start = imx_sc_wdt_start,
>>>>> .stop = imx_sc_wdt_stop,
>>>>> .ping = imx_sc_wdt_ping,
>>>>> .set_timeout = imx_sc_wdt_set_timeout,
>>>>> + .set_pretimeout = imx_sc_wdt_set_pretimeout,
>>>>> };
>>>>>
>>>>> -static const struct watchdog_info imx_sc_wdt_info = {
>>>>> +static struct watchdog_info imx_sc_wdt_info = {
>>>>> .identity = "i.MX SC watchdog timer",
>>>>> .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
>>>>> - WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
>>>>> + WDIOF_MAGICCLOSE,
>>>>> };
>>>>>
>>>>> static int imx_sc_wdt_probe(struct platform_device *pdev)
>>>>> {
>>>>> + struct imx_sc_wdt_device *imx_sc_wdd;
>>>>> + struct watchdog_device *wdog;
>>>>> struct device *dev = &pdev->dev;
>>>>> - struct watchdog_device *imx_sc_wdd;
>>>>> int ret;
>>>>>
>>>>> imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd),
>>>>> GFP_KERNEL);
>>>> @@
>>>>> -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct
>>>>> platform_device
>>>>> *pdev)
>>>>>
>>>>> platform_set_drvdata(pdev, imx_sc_wdd);
>>>>>
>>>>> - imx_sc_wdd->info = &imx_sc_wdt_info;
>>>>> - imx_sc_wdd->ops = &imx_sc_wdt_ops;
>>>>> - imx_sc_wdd->min_timeout = 1;
>>>>> - imx_sc_wdd->max_timeout = MAX_TIMEOUT;
>>>>> - imx_sc_wdd->parent = dev;
>>>>> - imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
>>>>> + wdog = &imx_sc_wdd->wdd;
>>>>> + wdog->info = &imx_sc_wdt_info;
>>>>> + wdog->ops = &imx_sc_wdt_ops;
>>>>> + wdog->min_timeout = 1;
>>>>> + wdog->max_timeout = MAX_TIMEOUT;
>>>>> + wdog->parent = dev;
>>>>> + wdog->timeout = DEFAULT_TIMEOUT;
>>>>>
>>>>> - watchdog_init_timeout(imx_sc_wdd, 0, dev);
>>>>> - watchdog_stop_on_reboot(imx_sc_wdd);
>>>>> - watchdog_stop_on_unregister(imx_sc_wdd);
>>>>> + watchdog_init_timeout(wdog, 0, dev);
>>>>> + watchdog_stop_on_reboot(wdog);
>>>>> + watchdog_stop_on_unregister(wdog);
>>>>>
>>>>> - ret = devm_watchdog_register_device(dev, imx_sc_wdd);
>>>>> + ret = devm_watchdog_register_device(dev, wdog);
>>>>> if (ret) {
>>>>> dev_err(dev, "Failed to register watchdog device\n");
>>>>> return ret;
>>>>> }
>>>>>
>>>>> + ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
>>>>> + SC_IRQ_WDOG,
>>>>> + true);
>>>>> + if (ret) {
>>>>> + dev_warn(dev, "Enable irq failed, pretimeout NOT
>>>> supported\n");
>>>>> + return 0;
>>>>> + }
>>>>> +
>>>>> + imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
>>>>> + ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
>>>>> + if (ret) {
>>>>> + imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
>>>>> + SC_IRQ_WDOG,
>>>>> + false);
>>>>> + dev_warn(dev,
>>>>> + "Register irq notifier failed, pretimeout NOT
>>>> supported\n");
>>>>> + return 0;
>>>>> + }
>>>>> +
>>>>> + ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
>>>>> + &imx_sc_wdd->wdt_notifier);
>>>>> + if (!ret)
>>>>> + imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
>>>>> + else
>>>>> + dev_warn(dev, "Add action failed, pretimeout NOT
>>>> supported\n");
>>>>> +
>>>>> return 0;
>>>>> }
>>>>>
>>>>> static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
>>>>> {
>>>>> - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
>>>>> + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
>>>>>
>>>>> - if (watchdog_active(imx_sc_wdd))
>>>>> - imx_sc_wdt_stop(imx_sc_wdd);
>>>>> + if (watchdog_active(&imx_sc_wdd->wdd))
>>>>> + imx_sc_wdt_stop(&imx_sc_wdd->wdd);
>>>>>
>>>>> return 0;
>>>>> }
>>>>>
>>>>> static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
>>>>> {
>>>>> - struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
>>>>> + struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);
>>>>>
>>>>> - if (watchdog_active(imx_sc_wdd))
>>>>> - imx_sc_wdt_start(imx_sc_wdd);
>>>>> + if (watchdog_active(&imx_sc_wdd->wdd))
>>>>> + imx_sc_wdt_start(&imx_sc_wdd->wdd);
>>>>>
>>>>> return 0;
>>>>> }
>>>>>
>>>