This patch updates the documentation with the information related
to the quirks that needs to be added for disabling the link entering
into the U1 and U2 states
Signed-off-by: Anurag Kumar Vulisha <[email protected]>
---
Changes in v3:
-None
Changes in v2
1. As suggested by Thinh Nguyen changed the "snps,dis_u1_entry_quirk"
to "snps,dis-u1-entry-quirk"
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 8e5265e..66780a4 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -64,6 +64,8 @@ Optional properties:
- snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
- snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
disabling the suspend signal to the PHY.
+ - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled.
+ - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled.
- snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
in PHY P3 power state.
- snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
--
2.1.1
On Fri, 10 May 2019 12:37:26 +0530, Anurag Kumar Vulisha wrote:
> This patch updates the documentation with the information related
> to the quirks that needs to be added for disabling the link entering
> into the U1 and U2 states
>
> Signed-off-by: Anurag Kumar Vulisha <[email protected]>
> ---
> Changes in v3:
> -None
>
> Changes in v2
> 1. As suggested by Thinh Nguyen changed the "snps,dis_u1_entry_quirk"
> to "snps,dis-u1-entry-quirk"
> ---
> Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
Reviewed-by: Rob Herring <[email protected]>