The '#address-cells' and '#size-cells' properties were not defined in
the lm3630a bindings and would cause the following error when
attempting to validate the examples against the schema:
Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
'#address-cells', '#size-cells' do not match any of the regexes:
'^led@[01]$', 'pinctrl-[0-9]+'
Correct this by adding those two properties.
While we're here, move the ti,linear-mapping-mode property to the
led@[01] child nodes to correct the following validation error:
Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
'pinctrl-[0-9]+'
Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
Signed-off-by: Brian Masney <[email protected]>
Reported-by: Rob Herring <[email protected]>
---
.../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 4d61fe0a98a4..f0855e248ae5 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -23,16 +23,17 @@ properties:
reg:
maxItems: 1
- ti,linear-mapping-mode:
- description: |
- Enable linear mapping mode. If disabled, then it will use exponential
- mapping mode in which the ramp up/down appears to have a more uniform
- transition to the human eye.
- type: boolean
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
required:
- compatible
- reg
+ - '#address-cells'
+ - '#size-cells'
patternProperties:
"^led@[01]$":
@@ -73,6 +74,13 @@ patternProperties:
minimum: 0
maximum: 255
+ ti,linear-mapping-mode:
+ description: |
+ Enable linear mapping mode. If disabled, then it will use exponential
+ mapping mode in which the ramp up/down appears to have a more uniform
+ transition to the human eye.
+ type: boolean
+
required:
- reg
--
2.20.1
On Mon, May 20, 2019 at 3:59 AM Brian Masney <[email protected]> wrote:
>
> The '#address-cells' and '#size-cells' properties were not defined in
> the lm3630a bindings and would cause the following error when
> attempting to validate the examples against the schema:
>
> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> '#address-cells', '#size-cells' do not match any of the regexes:
> '^led@[01]$', 'pinctrl-[0-9]+'
>
> Correct this by adding those two properties.
>
> While we're here, move the ti,linear-mapping-mode property to the
> led@[01] child nodes to correct the following validation error:
>
> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
> 'pinctrl-[0-9]+'
>
> Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
> Signed-off-by: Brian Masney <[email protected]>
> Reported-by: Rob Herring <[email protected]>
> ---
> .../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
Reviewed-by: Rob Herring <[email protected]>
On Mon, May 20, 2019 at 08:14:03AM -0500, Rob Herring wrote:
> On Mon, May 20, 2019 at 3:59 AM Brian Masney <[email protected]> wrote:
> >
> > The '#address-cells' and '#size-cells' properties were not defined in
> > the lm3630a bindings and would cause the following error when
> > attempting to validate the examples against the schema:
> >
> > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> > '#address-cells', '#size-cells' do not match any of the regexes:
> > '^led@[01]$', 'pinctrl-[0-9]+'
> >
> > Correct this by adding those two properties.
> >
> > While we're here, move the ti,linear-mapping-mode property to the
> > led@[01] child nodes to correct the following validation error:
> >
> > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> > led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
> > 'pinctrl-[0-9]+'
> >
> > Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
> > Signed-off-by: Brian Masney <[email protected]>
> > Reported-by: Rob Herring <[email protected]>
> > ---
> > .../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------
> > 1 file changed, 14 insertions(+), 6 deletions(-)
>
> Reviewed-by: Rob Herring <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
On 5/20/19 8:30 AM, Daniel Thompson wrote:
> On Mon, May 20, 2019 at 08:14:03AM -0500, Rob Herring wrote:
>> On Mon, May 20, 2019 at 3:59 AM Brian Masney <[email protected]> wrote:
>>>
>>> The '#address-cells' and '#size-cells' properties were not defined in
>>> the lm3630a bindings and would cause the following error when
>>> attempting to validate the examples against the schema:
>>>
>>> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
>>> '#address-cells', '#size-cells' do not match any of the regexes:
>>> '^led@[01]$', 'pinctrl-[0-9]+'
>>>
>>> Correct this by adding those two properties.
>>>
>>> While we're here, move the ti,linear-mapping-mode property to the
>>> led@[01] child nodes to correct the following validation error:
>>>
>>> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
>>> led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
>>> 'pinctrl-[0-9]+'
>>>
>>> Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
>>> Signed-off-by: Brian Masney <[email protected]>
>>> Reported-by: Rob Herring <[email protected]>
>>> ---
>>> .../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------
>>> 1 file changed, 14 insertions(+), 6 deletions(-)
>>
>> Reviewed-by: Rob Herring <[email protected]>
>
> Acked-by: Daniel Thompson <[email protected]>
>
Acked-by: Dan Murphy <[email protected]>
On Mon, 20 May 2019 04:58:46 -0400, Brian Masney wrote:
> The '#address-cells' and '#size-cells' properties were not defined in
> the lm3630a bindings and would cause the following error when
> attempting to validate the examples against the schema:
>
> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> '#address-cells', '#size-cells' do not match any of the regexes:
> '^led@[01]$', 'pinctrl-[0-9]+'
>
> Correct this by adding those two properties.
>
> While we're here, move the ti,linear-mapping-mode property to the
> led@[01] child nodes to correct the following validation error:
>
> Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
> led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
> 'pinctrl-[0-9]+'
>
> Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings")
> Signed-off-by: Brian Masney <[email protected]>
> Reported-by: Rob Herring <[email protected]>
> ---
> .../leds/backlight/lm3630a-backlight.yaml | 20 +++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
Applied, thanks.
Rob