The C2 TCAM has internal FIFOs that are only useful for the built-in
self-tests. Disable these FIFOS at init, as recommended in the
functionnal specs.
Suggested-by: Alan Winkowski <[email protected]>
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 ++
drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index d5df813e08c4..bb466af9434b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -148,6 +148,8 @@
#define MVPP22_CLS_C2_ATTR2 0x1b6c
#define MVPP22_CLS_C2_ATTR2_RSS_EN BIT(30)
#define MVPP22_CLS_C2_ATTR3 0x1b70
+#define MVPP22_CLS_C2_TCAM_CTRL 0x1b90
+#define MVPP22_CLS_C2_TCAM_BYPASS_FIFO BIT(0)
/* Descriptor Manager Top Registers */
#define MVPP2_RXQ_NUM_REG 0x2040
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
index 9ce73297276e..d549e9a29d9a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
@@ -923,6 +923,12 @@ void mvpp2_cls_init(struct mvpp2 *priv)
mvpp2_cls_c2_write(priv, &c2);
}
+ /* Disable the FIFO stages in C2 engine, which are only used in BIST
+ * mode
+ */
+ mvpp2_write(priv, MVPP22_CLS_C2_TCAM_CTRL,
+ MVPP22_CLS_C2_TCAM_BYPASS_FIFO);
+
mvpp2_cls_port_init_flows(priv);
}
--
2.20.1