2019-05-25 18:13:40

by Martin Blumenstingl

[permalink] [raw]
Subject: [PATCH 07/14] pwm: meson: add the meson_pwm_channel data to struct meson_pwm

Make struct meson_pwm_channel accessible from struct meson_pwm.

PWM core has a limitation: per-channel data can only be set after
pwmchip_add() is called. However, pwmchip_add() internally calls
pwm_ops.get_state(). If pwm_ops.get_state() needs access to the
per-channel data it has to obtain it from struct pwm_chip and struct
pwm_device's hwpwm information.

Add a struct meson_pwm_channel for each PWM channel to struct meson_pwm
so the pwm_ops.get_state() callback can be implemented as it needs
access to the clock from struct meson_pwm_channel.

Signed-off-by: Martin Blumenstingl <[email protected]>
---
drivers/pwm/pwm-meson.c | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index d6eb4d04d5c9..d1718f54ecec 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -37,6 +37,8 @@
#define MISC_B_EN BIT(1)
#define MISC_A_EN BIT(0)

+#define MESON_NUM_PWMS 2
+
static const unsigned int mux_reg_shifts[] = {
MISC_A_CLK_SEL_SHIFT,
MISC_B_CLK_SEL_SHIFT
@@ -62,6 +64,7 @@ struct meson_pwm_data {
struct meson_pwm {
struct pwm_chip chip;
const struct meson_pwm_data *data;
+ struct meson_pwm_channel channels[MESON_NUM_PWMS];
void __iomem *base;
/*
* Protects register (write) access to the REG_MISC_AB register
@@ -435,8 +438,7 @@ static const struct of_device_id meson_pwm_matches[] = {
};
MODULE_DEVICE_TABLE(of, meson_pwm_matches);

-static int meson_pwm_init_channels(struct meson_pwm *meson,
- struct meson_pwm_channel *channels)
+static int meson_pwm_init_channels(struct meson_pwm *meson)
{
struct device *dev = meson->chip.dev;
struct clk_init_data init;
@@ -445,7 +447,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
int err;

for (i = 0; i < meson->chip.npwm; i++) {
- struct meson_pwm_channel *channel = &channels[i];
+ struct meson_pwm_channel *channel = &meson->channels[i];

snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);

@@ -480,18 +482,16 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
return 0;
}

-static void meson_pwm_add_channels(struct meson_pwm *meson,
- struct meson_pwm_channel *channels)
+static void meson_pwm_add_channels(struct meson_pwm *meson)
{
unsigned int i;

for (i = 0; i < meson->chip.npwm; i++)
- pwm_set_chip_data(&meson->chip.pwms[i], &channels[i]);
+ pwm_set_chip_data(&meson->chip.pwms[i], &meson->channels[i]);
}

static int meson_pwm_probe(struct platform_device *pdev)
{
- struct meson_pwm_channel *channels;
struct meson_pwm *meson;
struct resource *regs;
int err;
@@ -509,18 +509,13 @@ static int meson_pwm_probe(struct platform_device *pdev)
meson->chip.dev = &pdev->dev;
meson->chip.ops = &meson_pwm_ops;
meson->chip.base = -1;
- meson->chip.npwm = 2;
+ meson->chip.npwm = MESON_NUM_PWM;
meson->chip.of_xlate = of_pwm_xlate_with_flags;
meson->chip.of_pwm_n_cells = 3;

meson->data = of_device_get_match_data(&pdev->dev);

- channels = devm_kcalloc(&pdev->dev, meson->chip.npwm,
- sizeof(*channels), GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- err = meson_pwm_init_channels(meson, channels);
+ err = meson_pwm_init_channels(meson);
if (err < 0)
return err;

@@ -530,7 +525,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
return err;
}

- meson_pwm_add_channels(meson, channels);
+ meson_pwm_add_channels(meson);

platform_set_drvdata(pdev, meson);

--
2.21.0


2019-05-27 12:29:27

by Neil Armstrong

[permalink] [raw]
Subject: Re: [PATCH 07/14] pwm: meson: add the meson_pwm_channel data to struct meson_pwm

On 25/05/2019 20:11, Martin Blumenstingl wrote:
> Make struct meson_pwm_channel accessible from struct meson_pwm.
>
> PWM core has a limitation: per-channel data can only be set after
> pwmchip_add() is called. However, pwmchip_add() internally calls
> pwm_ops.get_state(). If pwm_ops.get_state() needs access to the
> per-channel data it has to obtain it from struct pwm_chip and struct
> pwm_device's hwpwm information.
>
> Add a struct meson_pwm_channel for each PWM channel to struct meson_pwm
> so the pwm_ops.get_state() callback can be implemented as it needs
> access to the clock from struct meson_pwm_channel.
>
> Signed-off-by: Martin Blumenstingl <[email protected]>
> ---
> drivers/pwm/pwm-meson.c | 25 ++++++++++---------------
> 1 file changed, 10 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index d6eb4d04d5c9..d1718f54ecec 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -37,6 +37,8 @@
> #define MISC_B_EN BIT(1)
> #define MISC_A_EN BIT(0)
>
> +#define MESON_NUM_PWMS 2
> +
> static const unsigned int mux_reg_shifts[] = {
> MISC_A_CLK_SEL_SHIFT,
> MISC_B_CLK_SEL_SHIFT
> @@ -62,6 +64,7 @@ struct meson_pwm_data {
> struct meson_pwm {
> struct pwm_chip chip;
> const struct meson_pwm_data *data;
> + struct meson_pwm_channel channels[MESON_NUM_PWMS];
> void __iomem *base;
> /*
> * Protects register (write) access to the REG_MISC_AB register
> @@ -435,8 +438,7 @@ static const struct of_device_id meson_pwm_matches[] = {
> };
> MODULE_DEVICE_TABLE(of, meson_pwm_matches);
>
> -static int meson_pwm_init_channels(struct meson_pwm *meson,
> - struct meson_pwm_channel *channels)
> +static int meson_pwm_init_channels(struct meson_pwm *meson)
> {
> struct device *dev = meson->chip.dev;
> struct clk_init_data init;
> @@ -445,7 +447,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
> int err;
>
> for (i = 0; i < meson->chip.npwm; i++) {
> - struct meson_pwm_channel *channel = &channels[i];
> + struct meson_pwm_channel *channel = &meson->channels[i];
>
> snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
>
> @@ -480,18 +482,16 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
> return 0;
> }
>
> -static void meson_pwm_add_channels(struct meson_pwm *meson,
> - struct meson_pwm_channel *channels)
> +static void meson_pwm_add_channels(struct meson_pwm *meson)
> {
> unsigned int i;
>
> for (i = 0; i < meson->chip.npwm; i++)
> - pwm_set_chip_data(&meson->chip.pwms[i], &channels[i]);
> + pwm_set_chip_data(&meson->chip.pwms[i], &meson->channels[i]);
> }
>
> static int meson_pwm_probe(struct platform_device *pdev)
> {
> - struct meson_pwm_channel *channels;
> struct meson_pwm *meson;
> struct resource *regs;
> int err;
> @@ -509,18 +509,13 @@ static int meson_pwm_probe(struct platform_device *pdev)
> meson->chip.dev = &pdev->dev;
> meson->chip.ops = &meson_pwm_ops;
> meson->chip.base = -1;
> - meson->chip.npwm = 2;
> + meson->chip.npwm = MESON_NUM_PWM;
> meson->chip.of_xlate = of_pwm_xlate_with_flags;
> meson->chip.of_pwm_n_cells = 3;
>
> meson->data = of_device_get_match_data(&pdev->dev);
>
> - channels = devm_kcalloc(&pdev->dev, meson->chip.npwm,
> - sizeof(*channels), GFP_KERNEL);
> - if (!channels)
> - return -ENOMEM;
> -
> - err = meson_pwm_init_channels(meson, channels);
> + err = meson_pwm_init_channels(meson);
> if (err < 0)
> return err;
>
> @@ -530,7 +525,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
> return err;
> }
>
> - meson_pwm_add_channels(meson, channels);
> + meson_pwm_add_channels(meson);
>
> platform_set_drvdata(pdev, meson);
>
>

Reviewed-by: Neil Armstrong <[email protected]>

2019-05-27 17:56:02

by Martin Blumenstingl

[permalink] [raw]
Subject: Re: [PATCH 07/14] pwm: meson: add the meson_pwm_channel data to struct meson_pwm

On Sat, May 25, 2019 at 8:11 PM Martin Blumenstingl
<[email protected]> wrote:
[...]
> @@ -509,18 +509,13 @@ static int meson_pwm_probe(struct platform_device *pdev)
> meson->chip.dev = &pdev->dev;
> meson->chip.ops = &meson_pwm_ops;
> meson->chip.base = -1;
> - meson->chip.npwm = 2;
> + meson->chip.npwm = MESON_NUM_PWM;
I messed this up during rebase, the macro name is actually MESON_NUM_PWMS
I'll re-send a fix so these patches can be bisected cleanly (patch 8
fixes this typo accidentally)