2019-05-28 19:40:33

by Akash Gajjar

Subject: [PATCH] arm64: dts: rockchip: add WiFi+BT support on ROCK Pi4 board

Rock Pi 4 has a on board AP6256 WiFi/BT Module. enable wifi and bluetooth
support on Rock Pi 4 board.

Signed-off-by: Akash Gajjar <[email protected]>
---
.../boot/dts/rockchip/rk3399-rock-pi-4.dts | 97 +++++++++++++++++++
1 file changed, 97 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index e030627159c6..55e74f4d5cd0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -25,6 +25,15 @@
#clock-cells = <0>;
};

+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
vcc12v_dcin: dc-12v {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -451,12 +460,46 @@
};

&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

+ sdio0 {
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -482,6 +525,17 @@
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};

&pwm2 {
@@ -494,6 +548,32 @@
vref-supply = <&vcc_1v8>;
};

+&sdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -557,6 +637,23 @@
};
};

+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
+
&uart2 {
status = "okay";
};
--
2.17.1

2019-06-04 13:41:51

by Heiko Stuebner

Subject: Re: [PATCH] arm64: dts: rockchip: add WiFi+BT support on ROCK Pi4 board

Am Dienstag, 28. Mai 2019, 20:46:58 CEST schrieb Akash Gajjar:
> Rock Pi 4 has a on board AP6256 WiFi/BT Module. enable wifi and bluetooth
> support on Rock Pi 4 board.
>
> Signed-off-by: Akash Gajjar <[email protected]>

applied for 5.3

Thanks
Heiko