2019-05-30 04:45:16

by Anson Huang

Subject: [PATCH] dt-bindings: imx: Correct pinfunc head file path for i.MX8MM

From: Anson Huang <[email protected]>

The i.MX8MM pinfunc head file is located in DT folder, correct it.

Signed-off-by: Anson Huang <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
index 524a16f..e4e01c0 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
@@ -12,7 +12,7 @@ Required properties in sub-nodes:
- fsl,pins: each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
- <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is
+ <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is
the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini
Reference Manual for detailed CONFIG settings.

--
2.7.4

2019-06-07 22:50:39

by Linus Walleij

Subject: Re: [PATCH] dt-bindings: imx: Correct pinfunc head file path for i.MX8MM

On Thu, May 30, 2019 at 5:12 AM <[email protected]> wrote:

> From: Anson Huang <[email protected]>
>
> The i.MX8MM pinfunc head file is located in DT folder, correct it.
>
> Signed-off-by: Anson Huang <[email protected]>

Patch applied.

Yours,
Linus Walleij