2019-06-04 12:24:53

by Torsten Duwe

[permalink] [raw]
Subject: [PATCH v2 2/7] drm/bridge: split some definitions of ANX78xx to dedicated headers

From: Icenowy Zheng <[email protected]>

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.

Signed-off-by: Icenowy Zheng <[email protected]>
Signed-off-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Torsten Duwe <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h | 465 +--------------------
.../gpu/drm/bridge/analogix/analogix-i2c-dptx.h | 256 ++++++++++++
.../drm/bridge/analogix/analogix-i2c-txcommon.h | 242 +++++++++++
3 files changed, 503 insertions(+), 460 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
index 38753c870137..3fbe2c3244fd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
@@ -11,13 +11,15 @@
* GNU General Public License for more details.
*
*/
-
#ifndef __ANX78xx_H
#define __ANX78xx_H

-#define TX_P0 0x70
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+#define TX_P0 ANALOGIX_I2C_DPTX
#define TX_P1 0x7a
-#define TX_P2 0x72
+#define TX_P2 ANALOGIX_I2C_TXCOMMON

#define RX_P0 0x7e
#define RX_P1 0x80
@@ -225,463 +227,6 @@
#define SP_CLEAR_AVMUTE BIT(4)
#define SP_SET_AVMUTE BIT(0)

-/***************************************************************/
-/* Register definition of device address 0x70 */
-/***************************************************************/
-
-/* HDCP Status Register */
-#define SP_TX_HDCP_STATUS_REG 0x00
-#define SP_AUTH_FAIL BIT(5)
-#define SP_AUTHEN_PASS BIT(1)
-
-/* HDCP Control Register 0 */
-#define SP_HDCP_CTRL0_REG 0x01
-#define SP_RX_REPEATER BIT(6)
-#define SP_RE_AUTH BIT(5)
-#define SP_SW_AUTH_OK BIT(4)
-#define SP_HARD_AUTH_EN BIT(3)
-#define SP_HDCP_ENC_EN BIT(2)
-#define SP_BKSV_SRM_PASS BIT(1)
-#define SP_KSVLIST_VLD BIT(0)
-/* HDCP Function Enabled */
-#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-/* HDCP Receiver BSTATUS Register 0 */
-#define SP_HDCP_RX_BSTATUS0_REG 0x1b
-/* HDCP Receiver BSTATUS Register 1 */
-#define SP_HDCP_RX_BSTATUS1_REG 0x1c
-
-/* HDCP Embedded "Blue Screen" Content Registers */
-#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
-#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
-#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
-
-/* HDCP Wait R0 Timing Register */
-#define SP_HDCP_WAIT_R0_TIME_REG 0x40
-
-/* HDCP Link Integrity Check Timer Register */
-#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
-
-/* HDCP Repeater Ready Wait Timer Register */
-#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
-
-/* HDCP Auto Timer Register */
-#define SP_HDCP_AUTO_TIMER_REG 0x51
-
-/* HDCP Key Status Register */
-#define SP_HDCP_KEY_STATUS_REG 0x5e
-
-/* HDCP Key Command Register */
-#define SP_HDCP_KEY_COMMAND_REG 0x5f
-#define SP_DISABLE_SYNC_HDCP BIT(2)
-
-/* OTP Memory Key Protection Registers */
-#define SP_OTP_KEY_PROTECT1_REG 0x60
-#define SP_OTP_KEY_PROTECT2_REG 0x61
-#define SP_OTP_KEY_PROTECT3_REG 0x62
-#define SP_OTP_PSW1 0xa2
-#define SP_OTP_PSW2 0x7e
-#define SP_OTP_PSW3 0xc6
-
-/* DP System Control Registers */
-#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
-/* Bits for DP System Control Register 2 */
-#define SP_CHA_STA BIT(2)
-/* Bits for DP System Control Register 3 */
-#define SP_HPD_STATUS BIT(6)
-#define SP_STRM_VALID BIT(2)
-/* Bits for DP System Control Register 4 */
-#define SP_ENHANCED_MODE BIT(3)
-
-/* DP Video Control Register */
-#define SP_DP_VIDEO_CTRL_REG 0x84
-#define SP_COLOR_F_MASK 0x06
-#define SP_COLOR_F_SHIFT 1
-#define SP_BPC_MASK 0xe0
-#define SP_BPC_SHIFT 5
-# define SP_BPC_6BITS 0x00
-# define SP_BPC_8BITS 0x01
-# define SP_BPC_10BITS 0x02
-# define SP_BPC_12BITS 0x03
-
-/* DP Audio Control Register */
-#define SP_DP_AUDIO_CTRL_REG 0x87
-#define SP_AUD_EN BIT(0)
-
-/* 10us Pulse Generate Timer Registers */
-#define SP_I2C_GEN_10US_TIMER0_REG 0x88
-#define SP_I2C_GEN_10US_TIMER1_REG 0x89
-
-/* Packet Send Control Register */
-#define SP_PACKET_SEND_CTRL_REG 0x90
-#define SP_AUD_IF_UP BIT(7)
-#define SP_AVI_IF_UD BIT(6)
-#define SP_MPEG_IF_UD BIT(5)
-#define SP_SPD_IF_UD BIT(4)
-#define SP_AUD_IF_EN BIT(3)
-#define SP_AVI_IF_EN BIT(2)
-#define SP_MPEG_IF_EN BIT(1)
-#define SP_SPD_IF_EN BIT(0)
-
-/* DP HDCP Control Register */
-#define SP_DP_HDCP_CTRL_REG 0x92
-#define SP_AUTO_EN BIT(7)
-#define SP_AUTO_START BIT(5)
-#define SP_LINK_POLLING BIT(1)
-
-/* DP Main Link Bandwidth Setting Register */
-#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
-#define SP_LINK_BW_SET_MASK 0x1f
-#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
-
-/* DP Training Pattern Set Register */
-#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
-
-/* DP Lane 0 Link Training Control Register */
-#define SP_DP_LANE0_LT_CTRL_REG 0xa3
-#define SP_TX_SW_SET_MASK 0x1b
-#define SP_MAX_PRE_REACH BIT(5)
-#define SP_MAX_DRIVE_REACH BIT(4)
-#define SP_PRE_EMP_LEVEL1 BIT(3)
-#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
-
-/* DP Link Training Control Register */
-#define SP_DP_LT_CTRL_REG 0xa8
-#define SP_LT_ERROR_TYPE_MASK 0x70
-# define SP_LT_NO_ERROR 0x00
-# define SP_LT_AUX_WRITE_ERROR 0x01
-# define SP_LT_MAX_DRIVE_REACHED 0x02
-# define SP_LT_WRONG_LANE_COUNT_SET 0x03
-# define SP_LT_LOOP_SAME_5_TIME 0x04
-# define SP_LT_CR_FAIL_IN_EQ 0x05
-# define SP_LT_EQ_LOOP_5_TIME 0x06
-#define SP_LT_EN BIT(0)
-
-/* DP CEP Training Control Registers */
-#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
-#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
-
-/* DP Debug Register 1 */
-#define SP_DP_DEBUG1_REG 0xb0
-#define SP_DEBUG_PLL_LOCK BIT(4)
-#define SP_POLLING_EN BIT(1)
-
-/* DP Polling Control Register */
-#define SP_DP_POLLING_CTRL_REG 0xb4
-#define SP_AUTO_POLLING_DISABLE BIT(0)
-
-/* DP Link Debug Control Register */
-#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
-#define SP_M_VID_DEBUG BIT(5)
-#define SP_NEW_PRBS7 BIT(4)
-#define SP_INSERT_ER BIT(1)
-#define SP_PRBS31_EN BIT(0)
-
-/* AUX Misc control Register */
-#define SP_AUX_MISC_CTRL_REG 0xbf
-
-/* DP PLL control Register */
-#define SP_DP_PLL_CTRL_REG 0xc7
-#define SP_PLL_RST BIT(6)
-
-/* DP Analog Power Down Register */
-#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
-#define SP_CH0_PD BIT(0)
-
-/* DP Misc Control Register */
-#define SP_DP_MISC_CTRL_REG 0xcd
-#define SP_EQ_TRAINING_LOOP BIT(6)
-
-/* DP Extra I2C Device Address Register */
-#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
-#define SP_I2C_STRETCH_DISABLE BIT(7)
-
-#define SP_I2C_EXTRA_ADDR 0x50
-
-/* DP Downspread Control Register 1 */
-#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
-
-/* DP M Value Calculation Control Register */
-#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
-#define SP_M_GEN_CLK_SEL BIT(0)
-
-/* AUX Channel Access Status Register */
-#define SP_AUX_CH_STATUS_REG 0xe0
-#define SP_AUX_STATUS 0x0f
-
-/* AUX Channel DEFER Control Register */
-#define SP_AUX_DEFER_CTRL_REG 0xe2
-#define SP_DEFER_CTRL_EN BIT(7)
-
-/* DP Buffer Data Count Register */
-#define SP_BUF_DATA_COUNT_REG 0xe4
-#define SP_BUF_DATA_COUNT_MASK 0x1f
-#define SP_BUF_CLR BIT(7)
-
-/* DP AUX Channel Control Register 1 */
-#define SP_DP_AUX_CH_CTRL1_REG 0xe5
-#define SP_AUX_TX_COMM_MASK 0x0f
-#define SP_AUX_LENGTH_MASK 0xf0
-#define SP_AUX_LENGTH_SHIFT 4
-
-/* DP AUX CH Address Register 0 */
-#define SP_AUX_ADDR_7_0_REG 0xe6
-
-/* DP AUX CH Address Register 1 */
-#define SP_AUX_ADDR_15_8_REG 0xe7
-
-/* DP AUX CH Address Register 2 */
-#define SP_AUX_ADDR_19_16_REG 0xe8
-#define SP_AUX_ADDR_19_16_MASK 0x0f
-
-/* DP AUX Channel Control Register 2 */
-#define SP_DP_AUX_CH_CTRL2_REG 0xe9
-#define SP_AUX_SEL_RXCM BIT(6)
-#define SP_AUX_CHSEL BIT(3)
-#define SP_AUX_PN_INV BIT(2)
-#define SP_ADDR_ONLY BIT(1)
-#define SP_AUX_EN BIT(0)
-
-/* DP Video Stream Control InfoFrame Register */
-#define SP_DP_3D_VSC_CTRL_REG 0xea
-#define SP_INFO_FRAME_VSC_EN BIT(0)
-
-/* DP Video Stream Data Byte 1 Register */
-#define SP_DP_VSC_DB1_REG 0xeb
-
-/* DP AUX Channel Control Register 3 */
-#define SP_DP_AUX_CH_CTRL3_REG 0xec
-#define SP_WAIT_COUNTER_7_0_MASK 0xff
-
-/* DP AUX Channel Control Register 4 */
-#define SP_DP_AUX_CH_CTRL4_REG 0xed
-
-/* DP AUX Buffer Data Registers */
-#define SP_DP_BUF_DATA0_REG 0xf0
-
-/***************************************************************/
-/* Register definition of device address 0x72 */
-/***************************************************************/
-
-/*
- * Core Register Definitions
- */
-
-/* Device ID Low Byte Register */
-#define SP_DEVICE_IDL_REG 0x02
-
-/* Device ID High Byte Register */
-#define SP_DEVICE_IDH_REG 0x03
-
-/* Device version register */
-#define SP_DEVICE_VERSION_REG 0x04
-
-/* Power Down Control Register */
-#define SP_POWERDOWN_CTRL_REG 0x05
-#define SP_REGISTER_PD BIT(7)
-#define SP_HDCP_PD BIT(5)
-#define SP_AUDIO_PD BIT(4)
-#define SP_VIDEO_PD BIT(3)
-#define SP_LINK_PD BIT(2)
-#define SP_TOTAL_PD BIT(1)
-
-/* Reset Control Register 1 */
-#define SP_RESET_CTRL1_REG 0x06
-#define SP_MISC_RST BIT(7)
-#define SP_VIDCAP_RST BIT(6)
-#define SP_VIDFIF_RST BIT(5)
-#define SP_AUDFIF_RST BIT(4)
-#define SP_AUDCAP_RST BIT(3)
-#define SP_HDCP_RST BIT(2)
-#define SP_SW_RST BIT(1)
-#define SP_HW_RST BIT(0)
-
-/* Reset Control Register 2 */
-#define SP_RESET_CTRL2_REG 0x07
-#define SP_AUX_RST BIT(2)
-#define SP_SERDES_FIFO_RST BIT(1)
-#define SP_I2C_REG_RST BIT(0)
-
-/* Video Control Register 1 */
-#define SP_VID_CTRL1_REG 0x08
-#define SP_VIDEO_EN BIT(7)
-#define SP_VIDEO_MUTE BIT(2)
-#define SP_DE_GEN BIT(1)
-#define SP_DEMUX BIT(0)
-
-/* Video Control Register 2 */
-#define SP_VID_CTRL2_REG 0x09
-#define SP_IN_COLOR_F_MASK 0x03
-#define SP_IN_YC_BIT_SEL BIT(2)
-#define SP_IN_BPC_MASK 0x70
-#define SP_IN_BPC_SHIFT 4
-# define SP_IN_BPC_12BIT 0x03
-# define SP_IN_BPC_10BIT 0x02
-# define SP_IN_BPC_8BIT 0x01
-# define SP_IN_BPC_6BIT 0x00
-#define SP_IN_D_RANGE BIT(7)
-
-/* Video Control Register 3 */
-#define SP_VID_CTRL3_REG 0x0a
-#define SP_HPD_OUT BIT(6)
-
-/* Video Control Register 5 */
-#define SP_VID_CTRL5_REG 0x0c
-#define SP_CSC_STD_SEL BIT(7)
-#define SP_XVYCC_RNG_LMT BIT(6)
-#define SP_RANGE_Y2R BIT(5)
-#define SP_CSPACE_Y2R BIT(4)
-#define SP_RGB_RNG_LMT BIT(3)
-#define SP_Y_RNG_LMT BIT(2)
-#define SP_RANGE_R2Y BIT(1)
-#define SP_CSPACE_R2Y BIT(0)
-
-/* Video Control Register 6 */
-#define SP_VID_CTRL6_REG 0x0d
-#define SP_TEST_PATTERN_EN BIT(7)
-#define SP_VIDEO_PROCESS_EN BIT(6)
-#define SP_VID_US_MODE BIT(3)
-#define SP_VID_DS_MODE BIT(2)
-#define SP_UP_SAMPLE BIT(1)
-#define SP_DOWN_SAMPLE BIT(0)
-
-/* Video Control Register 8 */
-#define SP_VID_CTRL8_REG 0x0f
-#define SP_VID_VRES_TH BIT(0)
-
-/* Total Line Status Low Byte Register */
-#define SP_TOTAL_LINE_STAL_REG 0x24
-
-/* Total Line Status High Byte Register */
-#define SP_TOTAL_LINE_STAH_REG 0x25
-
-/* Active Line Status Low Byte Register */
-#define SP_ACT_LINE_STAL_REG 0x26
-
-/* Active Line Status High Byte Register */
-#define SP_ACT_LINE_STAH_REG 0x27
-
-/* Vertical Front Porch Status Register */
-#define SP_V_F_PORCH_STA_REG 0x28
-
-/* Vertical SYNC Width Status Register */
-#define SP_V_SYNC_STA_REG 0x29
-
-/* Vertical Back Porch Status Register */
-#define SP_V_B_PORCH_STA_REG 0x2a
-
-/* Total Pixel Status Low Byte Register */
-#define SP_TOTAL_PIXEL_STAL_REG 0x2b
-
-/* Total Pixel Status High Byte Register */
-#define SP_TOTAL_PIXEL_STAH_REG 0x2c
-
-/* Active Pixel Status Low Byte Register */
-#define SP_ACT_PIXEL_STAL_REG 0x2d
-
-/* Active Pixel Status High Byte Register */
-#define SP_ACT_PIXEL_STAH_REG 0x2e
-
-/* Horizontal Front Porch Status Low Byte Register */
-#define SP_H_F_PORCH_STAL_REG 0x2f
-
-/* Horizontal Front Porch Statys High Byte Register */
-#define SP_H_F_PORCH_STAH_REG 0x30
-
-/* Horizontal SYNC Width Status Low Byte Register */
-#define SP_H_SYNC_STAL_REG 0x31
-
-/* Horizontal SYNC Width Status High Byte Register */
-#define SP_H_SYNC_STAH_REG 0x32
-
-/* Horizontal Back Porch Status Low Byte Register */
-#define SP_H_B_PORCH_STAL_REG 0x33
-
-/* Horizontal Back Porch Status High Byte Register */
-#define SP_H_B_PORCH_STAH_REG 0x34
-
-/* InfoFrame AVI Packet DB1 Register */
-#define SP_INFOFRAME_AVI_DB1_REG 0x70
-
-/* Bit Control Specific Register */
-#define SP_BIT_CTRL_SPECIFIC_REG 0x80
-#define SP_BIT_CTRL_SELECT_SHIFT 1
-#define SP_ENABLE_BIT_CTRL BIT(0)
-
-/* InfoFrame Audio Packet DB1 Register */
-#define SP_INFOFRAME_AUD_DB1_REG 0x83
-
-/* InfoFrame MPEG Packet DB1 Register */
-#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
-
-/* Audio Channel Status Registers */
-#define SP_AUD_CH_STATUS_BASE 0xd0
-
-/* Audio Channel Num Register 5 */
-#define SP_I2S_CHANNEL_NUM_MASK 0xe0
-# define SP_I2S_CH_NUM_1 (0x00 << 5)
-# define SP_I2S_CH_NUM_2 (0x01 << 5)
-# define SP_I2S_CH_NUM_3 (0x02 << 5)
-# define SP_I2S_CH_NUM_4 (0x03 << 5)
-# define SP_I2S_CH_NUM_5 (0x04 << 5)
-# define SP_I2S_CH_NUM_6 (0x05 << 5)
-# define SP_I2S_CH_NUM_7 (0x06 << 5)
-# define SP_I2S_CH_NUM_8 (0x07 << 5)
-#define SP_EXT_VUCP BIT(2)
-#define SP_VBIT BIT(1)
-#define SP_AUDIO_LAYOUT BIT(0)
-
-/* Analog Debug Register 2 */
-#define SP_ANALOG_DEBUG2_REG 0xdd
-#define SP_FORCE_SW_OFF_BYPASS 0x20
-#define SP_XTAL_FRQ 0x1c
-# define SP_XTAL_FRQ_19M2 (0x00 << 2)
-# define SP_XTAL_FRQ_24M (0x01 << 2)
-# define SP_XTAL_FRQ_25M (0x02 << 2)
-# define SP_XTAL_FRQ_26M (0x03 << 2)
-# define SP_XTAL_FRQ_27M (0x04 << 2)
-# define SP_XTAL_FRQ_38M4 (0x05 << 2)
-# define SP_XTAL_FRQ_52M (0x06 << 2)
-#define SP_POWERON_TIME_1P5MS 0x03
-
-/* Analog Control 0 Register */
-#define SP_ANALOG_CTRL0_REG 0xe1
-
-/* Common Interrupt Status Register 1 */
-#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
-#define SP_PLL_LOCK_CHG 0x40
-
-/* Common Interrupt Status Register 2 */
-#define SP_COMMON_INT_STATUS2 0xf2
-#define SP_HDCP_AUTH_CHG BIT(1)
-#define SP_HDCP_AUTH_DONE BIT(0)
-
-#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
-
-/* Common Interrupt Status Register 4 */
-#define SP_COMMON_INT_STATUS4_REG 0xf4
-#define SP_HPD_IRQ BIT(6)
-#define SP_HPD_ESYNC_ERR BIT(4)
-#define SP_HPD_CHG BIT(2)
-#define SP_HPD_LOST BIT(1)
-#define SP_HPD_PLUG BIT(0)
-
-/* DP Interrupt Status Register */
-#define SP_DP_INT_STATUS1_REG 0xf7
-#define SP_TRAINING_FINISH BIT(5)
-#define SP_POLLING_ERR BIT(4)
-
-/* Common Interrupt Mask Register */
-#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
-
-#define SP_COMMON_INT_MASK4_REG 0xfb
-
-/* DP Interrupts Mask Register */
-#define SP_DP_INT_MASK1_REG 0xfe
-
-/* Interrupt Control Register */
-#define SP_INT_CTRL_REG 0xff
-
/***************************************************************/
/* Register definition of device address 0x7a */
/***************************************************************/
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
new file mode 100644
index 000000000000..5a54c6d86428
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ *
+ */
+#ifndef _ANALOGIX_I2C_DPTX_H_
+#define _ANALOGIX_I2C_DPTX_H_
+
+#define ANALOGIX_I2C_DPTX 0x70
+
+/***************************************************************/
+/* Register definition of device address 0x70 */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG 0x00
+#define SP_AUTH_FAIL BIT(5)
+#define SP_AUTHEN_PASS BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG 0x01
+#define SP_RX_REPEATER BIT(6)
+#define SP_RE_AUTH BIT(5)
+#define SP_SW_AUTH_OK BIT(4)
+#define SP_HARD_AUTH_EN BIT(3)
+#define SP_HDCP_ENC_EN BIT(2)
+#define SP_BKSV_SRM_PASS BIT(1)
+#define SP_KSVLIST_VLD BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define SP_HDCP_RX_BSTATUS0_REG 0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define SP_HDCP_RX_BSTATUS1_REG 0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG 0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG 0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG 0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG 0x5f
+#define SP_DISABLE_SYNC_HDCP BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG 0x60
+#define SP_OTP_KEY_PROTECT2_REG 0x61
+#define SP_OTP_KEY_PROTECT3_REG 0x62
+#define SP_OTP_PSW1 0xa2
+#define SP_OTP_PSW2 0x7e
+#define SP_OTP_PSW3 0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS BIT(6)
+#define SP_STRM_VALID BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG 0x84
+#define SP_COLOR_F_MASK 0x06
+#define SP_COLOR_F_SHIFT 1
+#define SP_BPC_MASK 0xe0
+#define SP_BPC_SHIFT 5
+# define SP_BPC_6BITS 0x00
+# define SP_BPC_8BITS 0x01
+# define SP_BPC_10BITS 0x02
+# define SP_BPC_12BITS 0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG 0x87
+#define SP_AUD_EN BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG 0x88
+#define SP_I2C_GEN_10US_TIMER1_REG 0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG 0x90
+#define SP_AUD_IF_UP BIT(7)
+#define SP_AVI_IF_UD BIT(6)
+#define SP_MPEG_IF_UD BIT(5)
+#define SP_SPD_IF_UD BIT(4)
+#define SP_AUD_IF_EN BIT(3)
+#define SP_AVI_IF_EN BIT(2)
+#define SP_MPEG_IF_EN BIT(1)
+#define SP_SPD_IF_EN BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG 0x92
+#define SP_AUTO_EN BIT(7)
+#define SP_AUTO_START BIT(5)
+#define SP_LINK_POLLING BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
+#define SP_LINK_BW_SET_MASK 0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG 0xa3
+#define SP_TX_SW_SET_MASK 0x1b
+#define SP_MAX_PRE_REACH BIT(5)
+#define SP_MAX_DRIVE_REACH BIT(4)
+#define SP_PRE_EMP_LEVEL1 BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG 0xa8
+#define SP_LT_ERROR_TYPE_MASK 0x70
+# define SP_LT_NO_ERROR 0x00
+# define SP_LT_AUX_WRITE_ERROR 0x01
+# define SP_LT_MAX_DRIVE_REACHED 0x02
+# define SP_LT_WRONG_LANE_COUNT_SET 0x03
+# define SP_LT_LOOP_SAME_5_TIME 0x04
+# define SP_LT_CR_FAIL_IN_EQ 0x05
+# define SP_LT_EQ_LOOP_5_TIME 0x06
+#define SP_LT_EN BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG 0xb0
+#define SP_DEBUG_PLL_LOCK BIT(4)
+#define SP_POLLING_EN BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG 0xb4
+#define SP_AUTO_POLLING_DISABLE BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
+#define SP_M_VID_DEBUG BIT(5)
+#define SP_NEW_PRBS7 BIT(4)
+#define SP_INSERT_ER BIT(1)
+#define SP_PRBS31_EN BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG 0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG 0xc7
+#define SP_PLL_RST BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
+#define SP_CH0_PD BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG 0xcd
+#define SP_EQ_TRAINING_LOOP BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
+#define SP_I2C_STRETCH_DISABLE BIT(7)
+
+#define SP_I2C_EXTRA_ADDR 0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
+#define SP_M_GEN_CLK_SEL BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG 0xe0
+#define SP_AUX_STATUS 0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG 0xe2
+#define SP_DEFER_CTRL_EN BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG 0xe4
+#define SP_BUF_DATA_COUNT_MASK 0x1f
+#define SP_BUF_CLR BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG 0xe5
+#define SP_AUX_TX_COMM_MASK 0x0f
+#define SP_AUX_LENGTH_MASK 0xf0
+#define SP_AUX_LENGTH_SHIFT 4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG 0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG 0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG 0xe8
+#define SP_AUX_ADDR_19_16_MASK 0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG 0xe9
+#define SP_AUX_SEL_RXCM BIT(6)
+#define SP_AUX_CHSEL BIT(3)
+#define SP_AUX_PN_INV BIT(2)
+#define SP_ADDR_ONLY BIT(1)
+#define SP_AUX_EN BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG 0xea
+#define SP_INFO_FRAME_VSC_EN BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG 0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG 0xec
+#define SP_WAIT_COUNTER_7_0_MASK 0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG 0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG 0xf0
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
new file mode 100644
index 000000000000..f48293f86f9d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -0,0 +1,242 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _ANALOGIX_I2C_TXCOMMON_H_
+#define _ANALOGIX_I2C_TXCOMMON_H_
+
+#define ANALOGIX_I2C_TXCOMMON 0x72
+
+/***************************************************************/
+/* Register definition of device address 0x72 */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG 0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG 0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG 0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG 0x05
+#define SP_REGISTER_PD BIT(7)
+#define SP_HDCP_PD BIT(5)
+#define SP_AUDIO_PD BIT(4)
+#define SP_VIDEO_PD BIT(3)
+#define SP_LINK_PD BIT(2)
+#define SP_TOTAL_PD BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG 0x06
+#define SP_MISC_RST BIT(7)
+#define SP_VIDCAP_RST BIT(6)
+#define SP_VIDFIF_RST BIT(5)
+#define SP_AUDFIF_RST BIT(4)
+#define SP_AUDCAP_RST BIT(3)
+#define SP_HDCP_RST BIT(2)
+#define SP_SW_RST BIT(1)
+#define SP_HW_RST BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG 0x07
+#define SP_AUX_RST BIT(2)
+#define SP_SERDES_FIFO_RST BIT(1)
+#define SP_I2C_REG_RST BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG 0x08
+#define SP_VIDEO_EN BIT(7)
+#define SP_VIDEO_MUTE BIT(2)
+#define SP_DE_GEN BIT(1)
+#define SP_DEMUX BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG 0x09
+#define SP_IN_COLOR_F_MASK 0x03
+#define SP_IN_YC_BIT_SEL BIT(2)
+#define SP_IN_BPC_MASK 0x70
+#define SP_IN_BPC_SHIFT 4
+# define SP_IN_BPC_12BIT 0x03
+# define SP_IN_BPC_10BIT 0x02
+# define SP_IN_BPC_8BIT 0x01
+# define SP_IN_BPC_6BIT 0x00
+#define SP_IN_D_RANGE BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG 0x0a
+#define SP_HPD_OUT BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG 0x0c
+#define SP_CSC_STD_SEL BIT(7)
+#define SP_XVYCC_RNG_LMT BIT(6)
+#define SP_RANGE_Y2R BIT(5)
+#define SP_CSPACE_Y2R BIT(4)
+#define SP_RGB_RNG_LMT BIT(3)
+#define SP_Y_RNG_LMT BIT(2)
+#define SP_RANGE_R2Y BIT(1)
+#define SP_CSPACE_R2Y BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG 0x0d
+#define SP_TEST_PATTERN_EN BIT(7)
+#define SP_VIDEO_PROCESS_EN BIT(6)
+#define SP_VID_US_MODE BIT(3)
+#define SP_VID_DS_MODE BIT(2)
+#define SP_UP_SAMPLE BIT(1)
+#define SP_DOWN_SAMPLE BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG 0x0f
+#define SP_VID_VRES_TH BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG 0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG 0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG 0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG 0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG 0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG 0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG 0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG 0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG 0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG 0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG 0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG 0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG 0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG 0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG 0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG 0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG 0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG 0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG 0x80
+#define SP_BIT_CTRL_SELECT_SHIFT 1
+#define SP_ENABLE_BIT_CTRL BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG 0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE 0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK 0xe0
+# define SP_I2S_CH_NUM_1 (0x00 << 5)
+# define SP_I2S_CH_NUM_2 (0x01 << 5)
+# define SP_I2S_CH_NUM_3 (0x02 << 5)
+# define SP_I2S_CH_NUM_4 (0x03 << 5)
+# define SP_I2S_CH_NUM_5 (0x04 << 5)
+# define SP_I2S_CH_NUM_6 (0x05 << 5)
+# define SP_I2S_CH_NUM_7 (0x06 << 5)
+# define SP_I2S_CH_NUM_8 (0x07 << 5)
+#define SP_EXT_VUCP BIT(2)
+#define SP_VBIT BIT(1)
+#define SP_AUDIO_LAYOUT BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG 0xdd
+#define SP_FORCE_SW_OFF_BYPASS 0x20
+#define SP_XTAL_FRQ 0x1c
+# define SP_XTAL_FRQ_19M2 (0x00 << 2)
+# define SP_XTAL_FRQ_24M (0x01 << 2)
+# define SP_XTAL_FRQ_25M (0x02 << 2)
+# define SP_XTAL_FRQ_26M (0x03 << 2)
+# define SP_XTAL_FRQ_27M (0x04 << 2)
+# define SP_XTAL_FRQ_38M4 (0x05 << 2)
+# define SP_XTAL_FRQ_52M (0x06 << 2)
+#define SP_POWERON_TIME_1P5MS 0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG 0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
+#define SP_PLL_LOCK_CHG 0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2 0xf2
+#define SP_HDCP_AUTH_CHG BIT(1)
+#define SP_HDCP_AUTH_DONE BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG 0xf4
+#define SP_HPD_IRQ BIT(6)
+#define SP_HPD_ESYNC_ERR BIT(4)
+#define SP_HPD_CHG BIT(2)
+#define SP_HPD_LOST BIT(1)
+#define SP_HPD_PLUG BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG 0xf7
+#define SP_TRAINING_FINISH BIT(5)
+#define SP_POLLING_ERR BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG 0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG 0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG 0xff
+
+#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */
--
2.16.4


2019-06-12 08:36:56

by Andrzej Hajda

[permalink] [raw]
Subject: Re: [PATCH v2 2/7] drm/bridge: split some definitions of ANX78xx to dedicated headers

On 04.06.2019 14:22, Torsten Duwe wrote:
> From: Icenowy Zheng <[email protected]>
>
> Some definitions currently in analogix-anx78xx.h are not restricted to
> the ANX78xx series, but also applicable to other DisplayPort
> transmitters by Analogix.
>
> Split out them to dedicated headers, and make analogix-anx78xx.h include
> them.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> Signed-off-by: Vasily Khoruzhick <[email protected]>
> Signed-off-by: Torsten Duwe <[email protected]>
> ---
> drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h | 465 +--------------------
> .../gpu/drm/bridge/analogix/analogix-i2c-dptx.h | 256 ++++++++++++
> .../drm/bridge/analogix/analogix-i2c-txcommon.h | 242 +++++++++++
> 3 files changed, 503 insertions(+), 460 deletions(-)
> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> index 38753c870137..3fbe2c3244fd 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> @@ -11,13 +11,15 @@
> * GNU General Public License for more details.
> *
> */
> -
> #ifndef __ANX78xx_H
> #define __ANX78xx_H
>
> -#define TX_P0 0x70
> +#include "analogix-i2c-dptx.h"
> +#include "analogix-i2c-txcommon.h"
> +
> +#define TX_P0 ANALOGIX_I2C_DPTX
> #define TX_P1 0x7a
> -#define TX_P2 0x72
> +#define TX_P2 ANALOGIX_I2C_TXCOMMON
>
> #define RX_P0 0x7e
> #define RX_P1 0x80
> @@ -225,463 +227,6 @@
> #define SP_CLEAR_AVMUTE BIT(4)
> #define SP_SET_AVMUTE BIT(0)
>
> -/***************************************************************/
> -/* Register definition of device address 0x70 */
> -/***************************************************************/
> -
> -/* HDCP Status Register */
> -#define SP_TX_HDCP_STATUS_REG 0x00
> -#define SP_AUTH_FAIL BIT(5)
> -#define SP_AUTHEN_PASS BIT(1)
> -
> -/* HDCP Control Register 0 */
> -#define SP_HDCP_CTRL0_REG 0x01
> -#define SP_RX_REPEATER BIT(6)
> -#define SP_RE_AUTH BIT(5)
> -#define SP_SW_AUTH_OK BIT(4)
> -#define SP_HARD_AUTH_EN BIT(3)
> -#define SP_HDCP_ENC_EN BIT(2)
> -#define SP_BKSV_SRM_PASS BIT(1)
> -#define SP_KSVLIST_VLD BIT(0)
> -/* HDCP Function Enabled */
> -#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
> -
> -/* HDCP Receiver BSTATUS Register 0 */
> -#define SP_HDCP_RX_BSTATUS0_REG 0x1b
> -/* HDCP Receiver BSTATUS Register 1 */
> -#define SP_HDCP_RX_BSTATUS1_REG 0x1c
> -
> -/* HDCP Embedded "Blue Screen" Content Registers */
> -#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
> -#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
> -#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
> -
> -/* HDCP Wait R0 Timing Register */
> -#define SP_HDCP_WAIT_R0_TIME_REG 0x40
> -
> -/* HDCP Link Integrity Check Timer Register */
> -#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
> -
> -/* HDCP Repeater Ready Wait Timer Register */
> -#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
> -
> -/* HDCP Auto Timer Register */
> -#define SP_HDCP_AUTO_TIMER_REG 0x51
> -
> -/* HDCP Key Status Register */
> -#define SP_HDCP_KEY_STATUS_REG 0x5e
> -
> -/* HDCP Key Command Register */
> -#define SP_HDCP_KEY_COMMAND_REG 0x5f
> -#define SP_DISABLE_SYNC_HDCP BIT(2)
> -
> -/* OTP Memory Key Protection Registers */
> -#define SP_OTP_KEY_PROTECT1_REG 0x60
> -#define SP_OTP_KEY_PROTECT2_REG 0x61
> -#define SP_OTP_KEY_PROTECT3_REG 0x62
> -#define SP_OTP_PSW1 0xa2
> -#define SP_OTP_PSW2 0x7e
> -#define SP_OTP_PSW3 0xc6
> -
> -/* DP System Control Registers */
> -#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
> -/* Bits for DP System Control Register 2 */
> -#define SP_CHA_STA BIT(2)
> -/* Bits for DP System Control Register 3 */
> -#define SP_HPD_STATUS BIT(6)
> -#define SP_STRM_VALID BIT(2)
> -/* Bits for DP System Control Register 4 */
> -#define SP_ENHANCED_MODE BIT(3)
> -
> -/* DP Video Control Register */
> -#define SP_DP_VIDEO_CTRL_REG 0x84
> -#define SP_COLOR_F_MASK 0x06
> -#define SP_COLOR_F_SHIFT 1
> -#define SP_BPC_MASK 0xe0
> -#define SP_BPC_SHIFT 5
> -# define SP_BPC_6BITS 0x00
> -# define SP_BPC_8BITS 0x01
> -# define SP_BPC_10BITS 0x02
> -# define SP_BPC_12BITS 0x03
> -
> -/* DP Audio Control Register */
> -#define SP_DP_AUDIO_CTRL_REG 0x87
> -#define SP_AUD_EN BIT(0)
> -
> -/* 10us Pulse Generate Timer Registers */
> -#define SP_I2C_GEN_10US_TIMER0_REG 0x88
> -#define SP_I2C_GEN_10US_TIMER1_REG 0x89
> -
> -/* Packet Send Control Register */
> -#define SP_PACKET_SEND_CTRL_REG 0x90
> -#define SP_AUD_IF_UP BIT(7)
> -#define SP_AVI_IF_UD BIT(6)
> -#define SP_MPEG_IF_UD BIT(5)
> -#define SP_SPD_IF_UD BIT(4)
> -#define SP_AUD_IF_EN BIT(3)
> -#define SP_AVI_IF_EN BIT(2)
> -#define SP_MPEG_IF_EN BIT(1)
> -#define SP_SPD_IF_EN BIT(0)
> -
> -/* DP HDCP Control Register */
> -#define SP_DP_HDCP_CTRL_REG 0x92
> -#define SP_AUTO_EN BIT(7)
> -#define SP_AUTO_START BIT(5)
> -#define SP_LINK_POLLING BIT(1)
> -
> -/* DP Main Link Bandwidth Setting Register */
> -#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
> -#define SP_LINK_BW_SET_MASK 0x1f
> -#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
> -
> -/* DP Training Pattern Set Register */
> -#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
> -
> -/* DP Lane 0 Link Training Control Register */
> -#define SP_DP_LANE0_LT_CTRL_REG 0xa3
> -#define SP_TX_SW_SET_MASK 0x1b
> -#define SP_MAX_PRE_REACH BIT(5)
> -#define SP_MAX_DRIVE_REACH BIT(4)
> -#define SP_PRE_EMP_LEVEL1 BIT(3)
> -#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
> -
> -/* DP Link Training Control Register */
> -#define SP_DP_LT_CTRL_REG 0xa8
> -#define SP_LT_ERROR_TYPE_MASK 0x70
> -# define SP_LT_NO_ERROR 0x00
> -# define SP_LT_AUX_WRITE_ERROR 0x01
> -# define SP_LT_MAX_DRIVE_REACHED 0x02
> -# define SP_LT_WRONG_LANE_COUNT_SET 0x03
> -# define SP_LT_LOOP_SAME_5_TIME 0x04
> -# define SP_LT_CR_FAIL_IN_EQ 0x05
> -# define SP_LT_EQ_LOOP_5_TIME 0x06
> -#define SP_LT_EN BIT(0)
> -
> -/* DP CEP Training Control Registers */
> -#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
> -#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
> -
> -/* DP Debug Register 1 */
> -#define SP_DP_DEBUG1_REG 0xb0
> -#define SP_DEBUG_PLL_LOCK BIT(4)
> -#define SP_POLLING_EN BIT(1)
> -
> -/* DP Polling Control Register */
> -#define SP_DP_POLLING_CTRL_REG 0xb4
> -#define SP_AUTO_POLLING_DISABLE BIT(0)
> -
> -/* DP Link Debug Control Register */
> -#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
> -#define SP_M_VID_DEBUG BIT(5)
> -#define SP_NEW_PRBS7 BIT(4)
> -#define SP_INSERT_ER BIT(1)
> -#define SP_PRBS31_EN BIT(0)
> -
> -/* AUX Misc control Register */
> -#define SP_AUX_MISC_CTRL_REG 0xbf
> -
> -/* DP PLL control Register */
> -#define SP_DP_PLL_CTRL_REG 0xc7
> -#define SP_PLL_RST BIT(6)
> -
> -/* DP Analog Power Down Register */
> -#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
> -#define SP_CH0_PD BIT(0)
> -
> -/* DP Misc Control Register */
> -#define SP_DP_MISC_CTRL_REG 0xcd
> -#define SP_EQ_TRAINING_LOOP BIT(6)
> -
> -/* DP Extra I2C Device Address Register */
> -#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
> -#define SP_I2C_STRETCH_DISABLE BIT(7)
> -
> -#define SP_I2C_EXTRA_ADDR 0x50
> -
> -/* DP Downspread Control Register 1 */
> -#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
> -
> -/* DP M Value Calculation Control Register */
> -#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
> -#define SP_M_GEN_CLK_SEL BIT(0)
> -
> -/* AUX Channel Access Status Register */
> -#define SP_AUX_CH_STATUS_REG 0xe0
> -#define SP_AUX_STATUS 0x0f
> -
> -/* AUX Channel DEFER Control Register */
> -#define SP_AUX_DEFER_CTRL_REG 0xe2
> -#define SP_DEFER_CTRL_EN BIT(7)
> -
> -/* DP Buffer Data Count Register */
> -#define SP_BUF_DATA_COUNT_REG 0xe4
> -#define SP_BUF_DATA_COUNT_MASK 0x1f
> -#define SP_BUF_CLR BIT(7)
> -
> -/* DP AUX Channel Control Register 1 */
> -#define SP_DP_AUX_CH_CTRL1_REG 0xe5
> -#define SP_AUX_TX_COMM_MASK 0x0f
> -#define SP_AUX_LENGTH_MASK 0xf0
> -#define SP_AUX_LENGTH_SHIFT 4
> -
> -/* DP AUX CH Address Register 0 */
> -#define SP_AUX_ADDR_7_0_REG 0xe6
> -
> -/* DP AUX CH Address Register 1 */
> -#define SP_AUX_ADDR_15_8_REG 0xe7
> -
> -/* DP AUX CH Address Register 2 */
> -#define SP_AUX_ADDR_19_16_REG 0xe8
> -#define SP_AUX_ADDR_19_16_MASK 0x0f
> -
> -/* DP AUX Channel Control Register 2 */
> -#define SP_DP_AUX_CH_CTRL2_REG 0xe9
> -#define SP_AUX_SEL_RXCM BIT(6)
> -#define SP_AUX_CHSEL BIT(3)
> -#define SP_AUX_PN_INV BIT(2)
> -#define SP_ADDR_ONLY BIT(1)
> -#define SP_AUX_EN BIT(0)
> -
> -/* DP Video Stream Control InfoFrame Register */
> -#define SP_DP_3D_VSC_CTRL_REG 0xea
> -#define SP_INFO_FRAME_VSC_EN BIT(0)
> -
> -/* DP Video Stream Data Byte 1 Register */
> -#define SP_DP_VSC_DB1_REG 0xeb
> -
> -/* DP AUX Channel Control Register 3 */
> -#define SP_DP_AUX_CH_CTRL3_REG 0xec
> -#define SP_WAIT_COUNTER_7_0_MASK 0xff
> -
> -/* DP AUX Channel Control Register 4 */
> -#define SP_DP_AUX_CH_CTRL4_REG 0xed
> -
> -/* DP AUX Buffer Data Registers */
> -#define SP_DP_BUF_DATA0_REG 0xf0
> -
> -/***************************************************************/
> -/* Register definition of device address 0x72 */
> -/***************************************************************/
> -
> -/*
> - * Core Register Definitions
> - */
> -
> -/* Device ID Low Byte Register */
> -#define SP_DEVICE_IDL_REG 0x02
> -
> -/* Device ID High Byte Register */
> -#define SP_DEVICE_IDH_REG 0x03
> -
> -/* Device version register */
> -#define SP_DEVICE_VERSION_REG 0x04
> -
> -/* Power Down Control Register */
> -#define SP_POWERDOWN_CTRL_REG 0x05
> -#define SP_REGISTER_PD BIT(7)
> -#define SP_HDCP_PD BIT(5)
> -#define SP_AUDIO_PD BIT(4)
> -#define SP_VIDEO_PD BIT(3)
> -#define SP_LINK_PD BIT(2)
> -#define SP_TOTAL_PD BIT(1)
> -
> -/* Reset Control Register 1 */
> -#define SP_RESET_CTRL1_REG 0x06
> -#define SP_MISC_RST BIT(7)
> -#define SP_VIDCAP_RST BIT(6)
> -#define SP_VIDFIF_RST BIT(5)
> -#define SP_AUDFIF_RST BIT(4)
> -#define SP_AUDCAP_RST BIT(3)
> -#define SP_HDCP_RST BIT(2)
> -#define SP_SW_RST BIT(1)
> -#define SP_HW_RST BIT(0)
> -
> -/* Reset Control Register 2 */
> -#define SP_RESET_CTRL2_REG 0x07
> -#define SP_AUX_RST BIT(2)
> -#define SP_SERDES_FIFO_RST BIT(1)
> -#define SP_I2C_REG_RST BIT(0)
> -
> -/* Video Control Register 1 */
> -#define SP_VID_CTRL1_REG 0x08
> -#define SP_VIDEO_EN BIT(7)
> -#define SP_VIDEO_MUTE BIT(2)
> -#define SP_DE_GEN BIT(1)
> -#define SP_DEMUX BIT(0)
> -
> -/* Video Control Register 2 */
> -#define SP_VID_CTRL2_REG 0x09
> -#define SP_IN_COLOR_F_MASK 0x03
> -#define SP_IN_YC_BIT_SEL BIT(2)
> -#define SP_IN_BPC_MASK 0x70
> -#define SP_IN_BPC_SHIFT 4
> -# define SP_IN_BPC_12BIT 0x03
> -# define SP_IN_BPC_10BIT 0x02
> -# define SP_IN_BPC_8BIT 0x01
> -# define SP_IN_BPC_6BIT 0x00
> -#define SP_IN_D_RANGE BIT(7)
> -
> -/* Video Control Register 3 */
> -#define SP_VID_CTRL3_REG 0x0a
> -#define SP_HPD_OUT BIT(6)
> -
> -/* Video Control Register 5 */
> -#define SP_VID_CTRL5_REG 0x0c
> -#define SP_CSC_STD_SEL BIT(7)
> -#define SP_XVYCC_RNG_LMT BIT(6)
> -#define SP_RANGE_Y2R BIT(5)
> -#define SP_CSPACE_Y2R BIT(4)
> -#define SP_RGB_RNG_LMT BIT(3)
> -#define SP_Y_RNG_LMT BIT(2)
> -#define SP_RANGE_R2Y BIT(1)
> -#define SP_CSPACE_R2Y BIT(0)
> -
> -/* Video Control Register 6 */
> -#define SP_VID_CTRL6_REG 0x0d
> -#define SP_TEST_PATTERN_EN BIT(7)
> -#define SP_VIDEO_PROCESS_EN BIT(6)
> -#define SP_VID_US_MODE BIT(3)
> -#define SP_VID_DS_MODE BIT(2)
> -#define SP_UP_SAMPLE BIT(1)
> -#define SP_DOWN_SAMPLE BIT(0)
> -
> -/* Video Control Register 8 */
> -#define SP_VID_CTRL8_REG 0x0f
> -#define SP_VID_VRES_TH BIT(0)
> -
> -/* Total Line Status Low Byte Register */
> -#define SP_TOTAL_LINE_STAL_REG 0x24
> -
> -/* Total Line Status High Byte Register */
> -#define SP_TOTAL_LINE_STAH_REG 0x25
> -
> -/* Active Line Status Low Byte Register */
> -#define SP_ACT_LINE_STAL_REG 0x26
> -
> -/* Active Line Status High Byte Register */
> -#define SP_ACT_LINE_STAH_REG 0x27
> -
> -/* Vertical Front Porch Status Register */
> -#define SP_V_F_PORCH_STA_REG 0x28
> -
> -/* Vertical SYNC Width Status Register */
> -#define SP_V_SYNC_STA_REG 0x29
> -
> -/* Vertical Back Porch Status Register */
> -#define SP_V_B_PORCH_STA_REG 0x2a
> -
> -/* Total Pixel Status Low Byte Register */
> -#define SP_TOTAL_PIXEL_STAL_REG 0x2b
> -
> -/* Total Pixel Status High Byte Register */
> -#define SP_TOTAL_PIXEL_STAH_REG 0x2c
> -
> -/* Active Pixel Status Low Byte Register */
> -#define SP_ACT_PIXEL_STAL_REG 0x2d
> -
> -/* Active Pixel Status High Byte Register */
> -#define SP_ACT_PIXEL_STAH_REG 0x2e
> -
> -/* Horizontal Front Porch Status Low Byte Register */
> -#define SP_H_F_PORCH_STAL_REG 0x2f
> -
> -/* Horizontal Front Porch Statys High Byte Register */
> -#define SP_H_F_PORCH_STAH_REG 0x30
> -
> -/* Horizontal SYNC Width Status Low Byte Register */
> -#define SP_H_SYNC_STAL_REG 0x31
> -
> -/* Horizontal SYNC Width Status High Byte Register */
> -#define SP_H_SYNC_STAH_REG 0x32
> -
> -/* Horizontal Back Porch Status Low Byte Register */
> -#define SP_H_B_PORCH_STAL_REG 0x33
> -
> -/* Horizontal Back Porch Status High Byte Register */
> -#define SP_H_B_PORCH_STAH_REG 0x34
> -
> -/* InfoFrame AVI Packet DB1 Register */
> -#define SP_INFOFRAME_AVI_DB1_REG 0x70
> -
> -/* Bit Control Specific Register */
> -#define SP_BIT_CTRL_SPECIFIC_REG 0x80
> -#define SP_BIT_CTRL_SELECT_SHIFT 1
> -#define SP_ENABLE_BIT_CTRL BIT(0)
> -
> -/* InfoFrame Audio Packet DB1 Register */
> -#define SP_INFOFRAME_AUD_DB1_REG 0x83
> -
> -/* InfoFrame MPEG Packet DB1 Register */
> -#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
> -
> -/* Audio Channel Status Registers */
> -#define SP_AUD_CH_STATUS_BASE 0xd0
> -
> -/* Audio Channel Num Register 5 */
> -#define SP_I2S_CHANNEL_NUM_MASK 0xe0
> -# define SP_I2S_CH_NUM_1 (0x00 << 5)
> -# define SP_I2S_CH_NUM_2 (0x01 << 5)
> -# define SP_I2S_CH_NUM_3 (0x02 << 5)
> -# define SP_I2S_CH_NUM_4 (0x03 << 5)
> -# define SP_I2S_CH_NUM_5 (0x04 << 5)
> -# define SP_I2S_CH_NUM_6 (0x05 << 5)
> -# define SP_I2S_CH_NUM_7 (0x06 << 5)
> -# define SP_I2S_CH_NUM_8 (0x07 << 5)
> -#define SP_EXT_VUCP BIT(2)
> -#define SP_VBIT BIT(1)
> -#define SP_AUDIO_LAYOUT BIT(0)
> -
> -/* Analog Debug Register 2 */
> -#define SP_ANALOG_DEBUG2_REG 0xdd
> -#define SP_FORCE_SW_OFF_BYPASS 0x20
> -#define SP_XTAL_FRQ 0x1c
> -# define SP_XTAL_FRQ_19M2 (0x00 << 2)
> -# define SP_XTAL_FRQ_24M (0x01 << 2)
> -# define SP_XTAL_FRQ_25M (0x02 << 2)
> -# define SP_XTAL_FRQ_26M (0x03 << 2)
> -# define SP_XTAL_FRQ_27M (0x04 << 2)
> -# define SP_XTAL_FRQ_38M4 (0x05 << 2)
> -# define SP_XTAL_FRQ_52M (0x06 << 2)
> -#define SP_POWERON_TIME_1P5MS 0x03
> -
> -/* Analog Control 0 Register */
> -#define SP_ANALOG_CTRL0_REG 0xe1
> -
> -/* Common Interrupt Status Register 1 */
> -#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
> -#define SP_PLL_LOCK_CHG 0x40
> -
> -/* Common Interrupt Status Register 2 */
> -#define SP_COMMON_INT_STATUS2 0xf2
> -#define SP_HDCP_AUTH_CHG BIT(1)
> -#define SP_HDCP_AUTH_DONE BIT(0)
> -
> -#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
> -
> -/* Common Interrupt Status Register 4 */
> -#define SP_COMMON_INT_STATUS4_REG 0xf4
> -#define SP_HPD_IRQ BIT(6)
> -#define SP_HPD_ESYNC_ERR BIT(4)
> -#define SP_HPD_CHG BIT(2)
> -#define SP_HPD_LOST BIT(1)
> -#define SP_HPD_PLUG BIT(0)
> -
> -/* DP Interrupt Status Register */
> -#define SP_DP_INT_STATUS1_REG 0xf7
> -#define SP_TRAINING_FINISH BIT(5)
> -#define SP_POLLING_ERR BIT(4)
> -
> -/* Common Interrupt Mask Register */
> -#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
> -
> -#define SP_COMMON_INT_MASK4_REG 0xfb
> -
> -/* DP Interrupts Mask Register */
> -#define SP_DP_INT_MASK1_REG 0xfe
> -
> -/* Interrupt Control Register */
> -#define SP_INT_CTRL_REG 0xff
> -
> /***************************************************************/
> /* Register definition of device address 0x7a */
> /***************************************************************/
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> new file mode 100644
> index 000000000000..5a54c6d86428
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> @@ -0,0 +1,256 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.


Please use SPDX identifiers in all new files.


> + *
> + * Based on anx7808 driver obtained from chromeos with copyright:
> + * Copyright(c) 2013, Google Inc.
> + *
> + */
> +#ifndef _ANALOGIX_I2C_DPTX_H_
> +#define _ANALOGIX_I2C_DPTX_H_
> +
> +#define ANALOGIX_I2C_DPTX 0x70
> +
> +/***************************************************************/
> +/* Register definition of device address 0x70 */
> +/***************************************************************/
> +
> +/* HDCP Status Register */
> +#define SP_TX_HDCP_STATUS_REG 0x00
> +#define SP_AUTH_FAIL BIT(5)
> +#define SP_AUTHEN_PASS BIT(1)
> +
> +/* HDCP Control Register 0 */
> +#define SP_HDCP_CTRL0_REG 0x01
> +#define SP_RX_REPEATER BIT(6)
> +#define SP_RE_AUTH BIT(5)
> +#define SP_SW_AUTH_OK BIT(4)
> +#define SP_HARD_AUTH_EN BIT(3)
> +#define SP_HDCP_ENC_EN BIT(2)
> +#define SP_BKSV_SRM_PASS BIT(1)
> +#define SP_KSVLIST_VLD BIT(0)
> +/* HDCP Function Enabled */
> +#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
> +
> +/* HDCP Receiver BSTATUS Register 0 */
> +#define SP_HDCP_RX_BSTATUS0_REG 0x1b
> +/* HDCP Receiver BSTATUS Register 1 */
> +#define SP_HDCP_RX_BSTATUS1_REG 0x1c
> +
> +/* HDCP Embedded "Blue Screen" Content Registers */
> +#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
> +#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
> +#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
> +
> +/* HDCP Wait R0 Timing Register */
> +#define SP_HDCP_WAIT_R0_TIME_REG 0x40
> +
> +/* HDCP Link Integrity Check Timer Register */
> +#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
> +
> +/* HDCP Repeater Ready Wait Timer Register */
> +#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
> +
> +/* HDCP Auto Timer Register */
> +#define SP_HDCP_AUTO_TIMER_REG 0x51
> +
> +/* HDCP Key Status Register */
> +#define SP_HDCP_KEY_STATUS_REG 0x5e
> +
> +/* HDCP Key Command Register */
> +#define SP_HDCP_KEY_COMMAND_REG 0x5f
> +#define SP_DISABLE_SYNC_HDCP BIT(2)
> +
> +/* OTP Memory Key Protection Registers */
> +#define SP_OTP_KEY_PROTECT1_REG 0x60
> +#define SP_OTP_KEY_PROTECT2_REG 0x61
> +#define SP_OTP_KEY_PROTECT3_REG 0x62
> +#define SP_OTP_PSW1 0xa2
> +#define SP_OTP_PSW2 0x7e
> +#define SP_OTP_PSW3 0xc6
> +
> +/* DP System Control Registers */
> +#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
> +/* Bits for DP System Control Register 2 */
> +#define SP_CHA_STA BIT(2)
> +/* Bits for DP System Control Register 3 */
> +#define SP_HPD_STATUS BIT(6)
> +#define SP_STRM_VALID BIT(2)
> +/* Bits for DP System Control Register 4 */
> +#define SP_ENHANCED_MODE BIT(3)
> +
> +/* DP Video Control Register */
> +#define SP_DP_VIDEO_CTRL_REG 0x84
> +#define SP_COLOR_F_MASK 0x06
> +#define SP_COLOR_F_SHIFT 1
> +#define SP_BPC_MASK 0xe0
> +#define SP_BPC_SHIFT 5
> +# define SP_BPC_6BITS 0x00
> +# define SP_BPC_8BITS 0x01
> +# define SP_BPC_10BITS 0x02
> +# define SP_BPC_12BITS 0x03
> +
> +/* DP Audio Control Register */
> +#define SP_DP_AUDIO_CTRL_REG 0x87
> +#define SP_AUD_EN BIT(0)
> +
> +/* 10us Pulse Generate Timer Registers */
> +#define SP_I2C_GEN_10US_TIMER0_REG 0x88
> +#define SP_I2C_GEN_10US_TIMER1_REG 0x89
> +
> +/* Packet Send Control Register */
> +#define SP_PACKET_SEND_CTRL_REG 0x90
> +#define SP_AUD_IF_UP BIT(7)
> +#define SP_AVI_IF_UD BIT(6)
> +#define SP_MPEG_IF_UD BIT(5)
> +#define SP_SPD_IF_UD BIT(4)
> +#define SP_AUD_IF_EN BIT(3)
> +#define SP_AVI_IF_EN BIT(2)
> +#define SP_MPEG_IF_EN BIT(1)
> +#define SP_SPD_IF_EN BIT(0)
> +
> +/* DP HDCP Control Register */
> +#define SP_DP_HDCP_CTRL_REG 0x92
> +#define SP_AUTO_EN BIT(7)
> +#define SP_AUTO_START BIT(5)
> +#define SP_LINK_POLLING BIT(1)
> +
> +/* DP Main Link Bandwidth Setting Register */
> +#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
> +#define SP_LINK_BW_SET_MASK 0x1f
> +#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
> +
> +/* DP Training Pattern Set Register */
> +#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
> +
> +/* DP Lane 0 Link Training Control Register */
> +#define SP_DP_LANE0_LT_CTRL_REG 0xa3
> +#define SP_TX_SW_SET_MASK 0x1b
> +#define SP_MAX_PRE_REACH BIT(5)
> +#define SP_MAX_DRIVE_REACH BIT(4)
> +#define SP_PRE_EMP_LEVEL1 BIT(3)
> +#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
> +
> +/* DP Link Training Control Register */
> +#define SP_DP_LT_CTRL_REG 0xa8
> +#define SP_LT_ERROR_TYPE_MASK 0x70
> +# define SP_LT_NO_ERROR 0x00
> +# define SP_LT_AUX_WRITE_ERROR 0x01
> +# define SP_LT_MAX_DRIVE_REACHED 0x02
> +# define SP_LT_WRONG_LANE_COUNT_SET 0x03
> +# define SP_LT_LOOP_SAME_5_TIME 0x04
> +# define SP_LT_CR_FAIL_IN_EQ 0x05
> +# define SP_LT_EQ_LOOP_5_TIME 0x06
> +#define SP_LT_EN BIT(0)
> +
> +/* DP CEP Training Control Registers */
> +#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
> +#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
> +
> +/* DP Debug Register 1 */
> +#define SP_DP_DEBUG1_REG 0xb0
> +#define SP_DEBUG_PLL_LOCK BIT(4)
> +#define SP_POLLING_EN BIT(1)
> +
> +/* DP Polling Control Register */
> +#define SP_DP_POLLING_CTRL_REG 0xb4
> +#define SP_AUTO_POLLING_DISABLE BIT(0)
> +
> +/* DP Link Debug Control Register */
> +#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
> +#define SP_M_VID_DEBUG BIT(5)
> +#define SP_NEW_PRBS7 BIT(4)
> +#define SP_INSERT_ER BIT(1)
> +#define SP_PRBS31_EN BIT(0)
> +
> +/* AUX Misc control Register */
> +#define SP_AUX_MISC_CTRL_REG 0xbf
> +
> +/* DP PLL control Register */
> +#define SP_DP_PLL_CTRL_REG 0xc7
> +#define SP_PLL_RST BIT(6)
> +
> +/* DP Analog Power Down Register */
> +#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
> +#define SP_CH0_PD BIT(0)
> +
> +/* DP Misc Control Register */
> +#define SP_DP_MISC_CTRL_REG 0xcd
> +#define SP_EQ_TRAINING_LOOP BIT(6)
> +
> +/* DP Extra I2C Device Address Register */
> +#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
> +#define SP_I2C_STRETCH_DISABLE BIT(7)
> +
> +#define SP_I2C_EXTRA_ADDR 0x50
> +
> +/* DP Downspread Control Register 1 */
> +#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
> +
> +/* DP M Value Calculation Control Register */
> +#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
> +#define SP_M_GEN_CLK_SEL BIT(0)
> +
> +/* AUX Channel Access Status Register */
> +#define SP_AUX_CH_STATUS_REG 0xe0
> +#define SP_AUX_STATUS 0x0f
> +
> +/* AUX Channel DEFER Control Register */
> +#define SP_AUX_DEFER_CTRL_REG 0xe2
> +#define SP_DEFER_CTRL_EN BIT(7)
> +
> +/* DP Buffer Data Count Register */
> +#define SP_BUF_DATA_COUNT_REG 0xe4
> +#define SP_BUF_DATA_COUNT_MASK 0x1f
> +#define SP_BUF_CLR BIT(7)
> +
> +/* DP AUX Channel Control Register 1 */
> +#define SP_DP_AUX_CH_CTRL1_REG 0xe5
> +#define SP_AUX_TX_COMM_MASK 0x0f
> +#define SP_AUX_LENGTH_MASK 0xf0
> +#define SP_AUX_LENGTH_SHIFT 4
> +
> +/* DP AUX CH Address Register 0 */
> +#define SP_AUX_ADDR_7_0_REG 0xe6
> +
> +/* DP AUX CH Address Register 1 */
> +#define SP_AUX_ADDR_15_8_REG 0xe7
> +
> +/* DP AUX CH Address Register 2 */
> +#define SP_AUX_ADDR_19_16_REG 0xe8
> +#define SP_AUX_ADDR_19_16_MASK 0x0f
> +
> +/* DP AUX Channel Control Register 2 */
> +#define SP_DP_AUX_CH_CTRL2_REG 0xe9
> +#define SP_AUX_SEL_RXCM BIT(6)
> +#define SP_AUX_CHSEL BIT(3)
> +#define SP_AUX_PN_INV BIT(2)
> +#define SP_ADDR_ONLY BIT(1)
> +#define SP_AUX_EN BIT(0)
> +
> +/* DP Video Stream Control InfoFrame Register */
> +#define SP_DP_3D_VSC_CTRL_REG 0xea
> +#define SP_INFO_FRAME_VSC_EN BIT(0)
> +
> +/* DP Video Stream Data Byte 1 Register */
> +#define SP_DP_VSC_DB1_REG 0xeb
> +
> +/* DP AUX Channel Control Register 3 */
> +#define SP_DP_AUX_CH_CTRL3_REG 0xec
> +#define SP_WAIT_COUNTER_7_0_MASK 0xff
> +
> +/* DP AUX Channel Control Register 4 */
> +#define SP_DP_AUX_CH_CTRL4_REG 0xed
> +
> +/* DP AUX Buffer Data Registers */
> +#define SP_DP_BUF_DATA0_REG 0xf0
> +
> +#endif
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> new file mode 100644
> index 000000000000..f48293f86f9d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> @@ -0,0 +1,242 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.


ditto


With above fixed:

Reviewed-by: Andrzej Hajda <[email protected]>

 --
Regards
Andrzej


> + *
> + */
> +#ifndef _ANALOGIX_I2C_TXCOMMON_H_
> +#define _ANALOGIX_I2C_TXCOMMON_H_
> +
> +#define ANALOGIX_I2C_TXCOMMON 0x72
> +
> +/***************************************************************/
> +/* Register definition of device address 0x72 */
> +/***************************************************************/
> +
> +/*
> + * Core Register Definitions
> + */
> +
> +/* Device ID Low Byte Register */
> +#define SP_DEVICE_IDL_REG 0x02
> +
> +/* Device ID High Byte Register */
> +#define SP_DEVICE_IDH_REG 0x03
> +
> +/* Device version register */
> +#define SP_DEVICE_VERSION_REG 0x04
> +
> +/* Power Down Control Register */
> +#define SP_POWERDOWN_CTRL_REG 0x05
> +#define SP_REGISTER_PD BIT(7)
> +#define SP_HDCP_PD BIT(5)
> +#define SP_AUDIO_PD BIT(4)
> +#define SP_VIDEO_PD BIT(3)
> +#define SP_LINK_PD BIT(2)
> +#define SP_TOTAL_PD BIT(1)
> +
> +/* Reset Control Register 1 */
> +#define SP_RESET_CTRL1_REG 0x06
> +#define SP_MISC_RST BIT(7)
> +#define SP_VIDCAP_RST BIT(6)
> +#define SP_VIDFIF_RST BIT(5)
> +#define SP_AUDFIF_RST BIT(4)
> +#define SP_AUDCAP_RST BIT(3)
> +#define SP_HDCP_RST BIT(2)
> +#define SP_SW_RST BIT(1)
> +#define SP_HW_RST BIT(0)
> +
> +/* Reset Control Register 2 */
> +#define SP_RESET_CTRL2_REG 0x07
> +#define SP_AUX_RST BIT(2)
> +#define SP_SERDES_FIFO_RST BIT(1)
> +#define SP_I2C_REG_RST BIT(0)
> +
> +/* Video Control Register 1 */
> +#define SP_VID_CTRL1_REG 0x08
> +#define SP_VIDEO_EN BIT(7)
> +#define SP_VIDEO_MUTE BIT(2)
> +#define SP_DE_GEN BIT(1)
> +#define SP_DEMUX BIT(0)
> +
> +/* Video Control Register 2 */
> +#define SP_VID_CTRL2_REG 0x09
> +#define SP_IN_COLOR_F_MASK 0x03
> +#define SP_IN_YC_BIT_SEL BIT(2)
> +#define SP_IN_BPC_MASK 0x70
> +#define SP_IN_BPC_SHIFT 4
> +# define SP_IN_BPC_12BIT 0x03
> +# define SP_IN_BPC_10BIT 0x02
> +# define SP_IN_BPC_8BIT 0x01
> +# define SP_IN_BPC_6BIT 0x00
> +#define SP_IN_D_RANGE BIT(7)
> +
> +/* Video Control Register 3 */
> +#define SP_VID_CTRL3_REG 0x0a
> +#define SP_HPD_OUT BIT(6)
> +
> +/* Video Control Register 5 */
> +#define SP_VID_CTRL5_REG 0x0c
> +#define SP_CSC_STD_SEL BIT(7)
> +#define SP_XVYCC_RNG_LMT BIT(6)
> +#define SP_RANGE_Y2R BIT(5)
> +#define SP_CSPACE_Y2R BIT(4)
> +#define SP_RGB_RNG_LMT BIT(3)
> +#define SP_Y_RNG_LMT BIT(2)
> +#define SP_RANGE_R2Y BIT(1)
> +#define SP_CSPACE_R2Y BIT(0)
> +
> +/* Video Control Register 6 */
> +#define SP_VID_CTRL6_REG 0x0d
> +#define SP_TEST_PATTERN_EN BIT(7)
> +#define SP_VIDEO_PROCESS_EN BIT(6)
> +#define SP_VID_US_MODE BIT(3)
> +#define SP_VID_DS_MODE BIT(2)
> +#define SP_UP_SAMPLE BIT(1)
> +#define SP_DOWN_SAMPLE BIT(0)
> +
> +/* Video Control Register 8 */
> +#define SP_VID_CTRL8_REG 0x0f
> +#define SP_VID_VRES_TH BIT(0)
> +
> +/* Total Line Status Low Byte Register */
> +#define SP_TOTAL_LINE_STAL_REG 0x24
> +
> +/* Total Line Status High Byte Register */
> +#define SP_TOTAL_LINE_STAH_REG 0x25
> +
> +/* Active Line Status Low Byte Register */
> +#define SP_ACT_LINE_STAL_REG 0x26
> +
> +/* Active Line Status High Byte Register */
> +#define SP_ACT_LINE_STAH_REG 0x27
> +
> +/* Vertical Front Porch Status Register */
> +#define SP_V_F_PORCH_STA_REG 0x28
> +
> +/* Vertical SYNC Width Status Register */
> +#define SP_V_SYNC_STA_REG 0x29
> +
> +/* Vertical Back Porch Status Register */
> +#define SP_V_B_PORCH_STA_REG 0x2a
> +
> +/* Total Pixel Status Low Byte Register */
> +#define SP_TOTAL_PIXEL_STAL_REG 0x2b
> +
> +/* Total Pixel Status High Byte Register */
> +#define SP_TOTAL_PIXEL_STAH_REG 0x2c
> +
> +/* Active Pixel Status Low Byte Register */
> +#define SP_ACT_PIXEL_STAL_REG 0x2d
> +
> +/* Active Pixel Status High Byte Register */
> +#define SP_ACT_PIXEL_STAH_REG 0x2e
> +
> +/* Horizontal Front Porch Status Low Byte Register */
> +#define SP_H_F_PORCH_STAL_REG 0x2f
> +
> +/* Horizontal Front Porch Statys High Byte Register */
> +#define SP_H_F_PORCH_STAH_REG 0x30
> +
> +/* Horizontal SYNC Width Status Low Byte Register */
> +#define SP_H_SYNC_STAL_REG 0x31
> +
> +/* Horizontal SYNC Width Status High Byte Register */
> +#define SP_H_SYNC_STAH_REG 0x32
> +
> +/* Horizontal Back Porch Status Low Byte Register */
> +#define SP_H_B_PORCH_STAL_REG 0x33
> +
> +/* Horizontal Back Porch Status High Byte Register */
> +#define SP_H_B_PORCH_STAH_REG 0x34
> +
> +/* InfoFrame AVI Packet DB1 Register */
> +#define SP_INFOFRAME_AVI_DB1_REG 0x70
> +
> +/* Bit Control Specific Register */
> +#define SP_BIT_CTRL_SPECIFIC_REG 0x80
> +#define SP_BIT_CTRL_SELECT_SHIFT 1
> +#define SP_ENABLE_BIT_CTRL BIT(0)
> +
> +/* InfoFrame Audio Packet DB1 Register */
> +#define SP_INFOFRAME_AUD_DB1_REG 0x83
> +
> +/* InfoFrame MPEG Packet DB1 Register */
> +#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
> +
> +/* Audio Channel Status Registers */
> +#define SP_AUD_CH_STATUS_BASE 0xd0
> +
> +/* Audio Channel Num Register 5 */
> +#define SP_I2S_CHANNEL_NUM_MASK 0xe0
> +# define SP_I2S_CH_NUM_1 (0x00 << 5)
> +# define SP_I2S_CH_NUM_2 (0x01 << 5)
> +# define SP_I2S_CH_NUM_3 (0x02 << 5)
> +# define SP_I2S_CH_NUM_4 (0x03 << 5)
> +# define SP_I2S_CH_NUM_5 (0x04 << 5)
> +# define SP_I2S_CH_NUM_6 (0x05 << 5)
> +# define SP_I2S_CH_NUM_7 (0x06 << 5)
> +# define SP_I2S_CH_NUM_8 (0x07 << 5)
> +#define SP_EXT_VUCP BIT(2)
> +#define SP_VBIT BIT(1)
> +#define SP_AUDIO_LAYOUT BIT(0)
> +
> +/* Analog Debug Register 2 */
> +#define SP_ANALOG_DEBUG2_REG 0xdd
> +#define SP_FORCE_SW_OFF_BYPASS 0x20
> +#define SP_XTAL_FRQ 0x1c
> +# define SP_XTAL_FRQ_19M2 (0x00 << 2)
> +# define SP_XTAL_FRQ_24M (0x01 << 2)
> +# define SP_XTAL_FRQ_25M (0x02 << 2)
> +# define SP_XTAL_FRQ_26M (0x03 << 2)
> +# define SP_XTAL_FRQ_27M (0x04 << 2)
> +# define SP_XTAL_FRQ_38M4 (0x05 << 2)
> +# define SP_XTAL_FRQ_52M (0x06 << 2)
> +#define SP_POWERON_TIME_1P5MS 0x03
> +
> +/* Analog Control 0 Register */
> +#define SP_ANALOG_CTRL0_REG 0xe1
> +
> +/* Common Interrupt Status Register 1 */
> +#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
> +#define SP_PLL_LOCK_CHG 0x40
> +
> +/* Common Interrupt Status Register 2 */
> +#define SP_COMMON_INT_STATUS2 0xf2
> +#define SP_HDCP_AUTH_CHG BIT(1)
> +#define SP_HDCP_AUTH_DONE BIT(0)
> +
> +#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
> +
> +/* Common Interrupt Status Register 4 */
> +#define SP_COMMON_INT_STATUS4_REG 0xf4
> +#define SP_HPD_IRQ BIT(6)
> +#define SP_HPD_ESYNC_ERR BIT(4)
> +#define SP_HPD_CHG BIT(2)
> +#define SP_HPD_LOST BIT(1)
> +#define SP_HPD_PLUG BIT(0)
> +
> +/* DP Interrupt Status Register */
> +#define SP_DP_INT_STATUS1_REG 0xf7
> +#define SP_TRAINING_FINISH BIT(5)
> +#define SP_POLLING_ERR BIT(4)
> +
> +/* Common Interrupt Mask Register */
> +#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
> +
> +#define SP_COMMON_INT_MASK4_REG 0xfb
> +
> +/* DP Interrupts Mask Register */
> +#define SP_DP_INT_MASK1_REG 0xfe
> +
> +/* Interrupt Control Register */
> +#define SP_INT_CTRL_REG 0xff
> +
> +#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */